This matches what we do in IR. For the RISC-V test case, this allows
us to use -8 for the AND mask instead of materializing a constant in a register.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D127335
As noticed on D127115 - we were missing this fold, instead just having the shuffle(shuffle(x,undef,splatmask),undef) fold. We should be able to merge these into one using SelectionDAG::isSplatValue, but we'll need to match the shuffle's undef handling first.
This also exposed an issue in SelectionDAG::isSplatValue which was incorrectly propagating the undef mask across a bitcast (it was trying to just bail with a APInt::isSubsetOf if it found any undefs but that was actually the wrong way around so didn't fire for partial undef cases).
Move the code that was added for D126896 after the normal recursive calls
to computeKnownBits. This allows us to calculate trailing zeros.
Previously we would break out of the switch before the recursive calls.
If C is non-negative, the result of the smax must also be
non-negative, so all sign bits of the result are 0.
This allows DAGCombiner to remove a zext_inreg in the modified test.
This zext_inreg started as a sext that became zext before type
legalization then was promoted to a zext_inreg.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D126896
abs should only produce a positive value or the signed minimum
value. This means we can't fold abs(undef) to undef as that would
allow more values. Fold to 0 instead to match InstSimplify.
Fixes test mentioned in comment on pr55271.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D126174
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
This patch uses VP_REDUCE_AND and VP_REDUCE_OR to replace VP_REDUCE_SMAX,VP_REDUCE_SMIN,VP_REDUCE_UMAX and VP_REDUCE_UMIN for mask vector type.
Differential Revision: https://reviews.llvm.org/D125002
During early gather/scatter enablement two different approaches
were taken to represent scaled indices:
* A Scale operand whereby byte_offsets = Index * Scale
* An IndexType whereby byte_offsets = Index * sizeof(MemVT.ElementType)
Having multiple representations is bad as shown by this patch which
fixes instances where the two are out of sync. The dedicated scale
operand is more flexible and pervasive so this patch removes the
UNSCALED values from IndexType. This means all indices are scaled
but the scale can be one, hence unscaled. SDNodes now use the scale
operand to answer the "isScaledIndex" question.
I toyed with the idea of keeping the UNSCALED enums and helper
functions but because they will have no uses and force SDNodes to
validate the set of supported values I figured it's best to remove
them. We can re-add them if there's a real need. For similar
reasons I've kept the IndexType enum when a bool could be used as I
think being explicitly looks better.
Depends On D123347
Differential Revision: https://reviews.llvm.org/D123381
The patch make users not need to know getNode with SDNodeFlags argument may not
pass its flags.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D125659
The result of sign_extend_inreg needs to have as many sign bits
as requested by the VT argument. The easiest way to guarantee this
is to fold it to 0.
SystemZ test was modified to avoid using undef.
Fixes https://github.com/llvm/llvm-project/issues/55178
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D124696
This extends the (X & ~Y) | Y to X | Y fold to also work if ~Y is
a truncated not (when taking into account the mask X). This is
done by exporting the infrastructure added in D124856 and reusing
it here.
I've retained the old value of AllowUndefs=false, though probably
this can be switched to true with extra test coverage.
Differential Revision: https://reviews.llvm.org/D124930
Demanded bits analysis may replace a full-width not with a
any_extend (not (truncate X)) pattern. This patch looks through
this kind of pattern in haveNoCommonBitsSet(). Of course, we can
only do this if we only need negated bits in the non-extended part,
as the other bits may now be arbitrary. For example, if we have
haveNoCommonBitsSet(~X & Y, X) then ~X only needs to actually
negate bits set in Y.
This is only a partial solution to the problem in that it allows
add -> or conversion, but the resulting or doesn't get folded yet.
(I guess that will involve exposing getBitwiseNotOperand() as a
more general helper and using that in the relevant transform.)
Differential Revision: https://reviews.llvm.org/D124856
This is the DAG variant of D124763. The code already handles the
general pattern, but not this degenerate case.
This allows folding A + (B&~A) to A | (B&~A) which further holds
to A | B.
Handling on the SDAG level is needed because in the motivating
case the add is actually a getelementptr, which only gets converted
into an add on the SDAG level. However, this patch is not quite
sufficient to handle the getelementptr case yet, because of an
interfering demanded bits simplification.
Differential Revision: https://reviews.llvm.org/D124772
The description of SETCC says
/// SetCC operator - This evaluates to a true value iff the condition is
/// true. If the result value type is not i1 then the high bits conform
/// to getBooleanContents.
Without this patch, we sign extended the i1 to the used larger type
regardless of getBooleanContents. This resulted in miscompiles, as
shown in the attached testcase that ended up returning -1 instead of
1 when using -mattr=+v.
Fixes https://github.com/llvm/llvm-project/issues/55168
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D124618
This patch adds the necessary infrastructure to lower vp.fcmp via
ISD::VP_SETCC to RVV instructions.
Most notably this patch adds cond-code legalization for VP_SETCC,
reusing the existing TargetLowering::LegalizeSetCCCondCode by passing in
additional SDValue parameters for the Mask and EVL. This method then
uses VP operations to legalize the condcode.
There is still a general lack of canonicalization on VP_SETCC as opposed
to SETCC which results in worse code than is theoretically possible.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D123051
Place PersistentId declaration under #if LLVM_ENABLE_ABI_BREAKING_CHECKS to
reduce memory usage when it is not needed.
Differential Revision: https://reviews.llvm.org/D120714
As raised on PR52267, XOR(X,MIN_SIGNED_VALUE) can be treated as ADD(X,MIN_SIGNED_VALUE), so let these cases use the 'AddLike' folds, similar to how we perform no-common-bits OR(X,Y) cases.
define i8 @src(i8 %x) {
%r = xor i8 %x, 128
ret i8 %r
}
=>
define i8 @tgt(i8 %x) {
%r = add i8 %x, 128
ret i8 %r
}
Transformation seems to be correct!
https://alive2.llvm.org/ce/z/qV46E2
Differential Revision: https://reviews.llvm.org/D122754
This patch fixes a (seemingly very rare) crash during vector constant
folding introduced in D113300.
Normally, during legalization, if we create an illegally-typed node during
a failed attempt at constant folding it's cleaned up before being
visited, due to it having no uses.
If, however, an illegally-typed node is created during one round of
legalization and isn't cleaned up, it's possible for a second round of
legalization to create new illegally-typed nodes which add extra uses to
the old illegal nodes. This means that we can end up visiting the old
nodes before they're known to be dead, at which point we crash.
I'm not happy about this fix. Creating illegal types at all seems like a
bad idea, but we all-too-often rely on illegal constants being
successfully folded and being fixed up afterwards. However, we can't
rely on constant folding actually happening, and we don't have a
foolproof way of peering into the future.
Perhaps the correct fix is to revisit the node-iteration order during
legalization, ensuring we visit all uses of nodes before the nodes
themselves. Or alternatively we could try and clean up dead nodes
immediately after failing constant folding.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D122382
The alignment needs to be part of the folding set hash. This is
handled by getAssertAlign when nodes are created, but needs to repeated here.
No test case as I found it as part of a very early experimental patch.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D122279
This patch introduces two new experimental IR intrinsics and SDAG nodes
to represent vector strided loads and stores.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D114884
SDNodes with different target flags may now be folded together
rightfully resulting in the assertion in the refineAlignment.
Folding nodes with different target flags may result in the
wrong load instructions produced at least on the AMDGPU.
Fixes: SWDEV-326805
Differential Revision: https://reviews.llvm.org/D121335
Currently we only check for splat shuffles, this extends it to see if the source operand is a splat across the demanded elts based upon the shuffle mask
This patch adds support for recognising vector splats by peeking through bitcasts to vectors with smaller element types - if all the offset subelements are splats then the bitcasted vector is a splat as well.
We don't have great coverage for isSplatValue so I've made this pretty specific to the use case I'm trying to fix - regressions in some vXi64 vector shift by splat cases that 32-bit x86 doesn't recognise because the shift amount buildvector has been type legalised to v2Xi32.
We can add further support (floats, bitcast from larger element types, undef elements) when we have actual test coverage.
Differential Revision: https://reviews.llvm.org/D120553
When doing SelectionDAG::ReplaceAllUsesOfValuesWith a worklist is
prepared containing all users that should be updated. Then we use
the RemoveNodeFromCSEMaps/AddModifiedNodeToCSEMaps helpers to handle
recursive CSE updates while doing the replacements.
This patch aims at solving a problem that could arise if the recursive
CSE updates would result in an SDNode present in the worklist is being
removed as a side-effect of morphing a prio user in the worklist.
To examplify such a scenario, imagine that we have these nodes in
the DAG
t12: i64 = add t8, t11
t13: i64 = add t12, t8
t14: i64 = add t11, t11
t15: i64 = add t14, t8
t16: i64 = sub t13, t15
and that the t8 uses should be replaced by t11. An initial worklist
(listing the users that should be morphed) could be [t12, t13, t15].
When updating t12 we get
t12: i64 = add t11, t11
which results in a CSE update that replaces t14 by t12, so we get
t15: i64 = add t12, t8
which results in a CSE update that replaces t13 by t12, so we get
t16: i64 = sub t12, t15
and then t13 is removed given that it was the last use of t13.
So when being done with the updates triggered by rewriting the use
of t8 in t12 the t13 node no longer exist. And we used to end up
hitting an assertion when continuing with the worklist aiming at
replacing the t8 uses in t13.
The solution is based on using a DAGUpdateListener, making sure that
we prune a user from the worklist if it is removed during the
recursive CSE updates.
The bug was found using an OOT target. I think the problem is quite
old, even if the particular intree target reproducer added in this
patch seem to pass when using LLVM 13.0.0.
Differential Revision: https://reviews.llvm.org/D119088
This adds very basic combines for AVG nodes, mostly for constant folding
and handling degenerate (zero) cases. The code performs mostly the same
transforms as visitMULHS, adjusted for AVG nodes.
Constant folding extends to a higher bitwidth and drops the lowest bit.
For undef nodes, `avg undef, x` is transformed to x. There is also a
transform for `avgfloor x, 0` transforming to `shr x, 1`.
Differential Revision: https://reviews.llvm.org/D119559
This helps recognise patterns where we're trying to match STEP_VECTOR
patterns to INDEX instructions that take a GPR for the Start/Step.
The reason for canonicalising this operation to the LHS is
because it will already be canonicalised to the LHS if the RHS
is a constant splat vector.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D118459
Do "simplifyShift" and "FoldConstantArithmetic" folds for the SSHLSAT
and USHLSAT DAG nodes.
This includes folds such as:
(shlsat undef/poison, x) -> 0
(shlsat x, undef/poison) -> undef
(shlsat x, too_large_shamt) -> undef
(shlsat 0, x) -> 0
(shlsat x, 0) -> x
(shlsat c1, c2) -> c3
Differential Revision: https://reviews.llvm.org/D118603
We already perform some basic folds (add/sub with zero etc.) on scalar types, this patch adds some basic support for constant splats as well in a few cases (we can add more with future test coverage).
In the cases I've enabled, we can handle buildvector implicit truncation as we're not creating new constant nodes from the vector types - we're just returning existing nodes. This allows us to get a number of extra cases in the aarch64 tests.
I haven't enabled support for undefs in buildvector splats, as we're often checking for zero/allones patterns that return the original constant and we shouldn't be returning undef elements in some of these cases - we can enable this later if we're OK with creating new constants.
Differential Revision: https://reviews.llvm.org/D118264
The loop below the changed line assumes that the element
width of the target constant is the same as the element
width of the loaded value, but that is not always true.
We could try harder to do some kind of min/max calc even
if the sizes don't match, but that can be another patch
if needed. This fixes#53401 (miscompile) and does not
change the motivating cases added when this analysis
was introduced:
ad298f86b7
Given that step_vector is practically a constant, doing this early
helps with DAGCombine folds that happen before type legalization.
There is currently no way to test this happens earlier, although existing
tests for step_vector folds continue protect the folds happening at all.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D117863
This can show up during when bitreverse is expanded to bswap and
swap of bits within a byte. If the input is already a bswap, we
should cancel them out before we further transform them in a way
that makes it harder to see the redundancy.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D118007
SelectionDAG::getNode() canonicalises constants to the RHS if the
operation is commutative, but it doesn't do so for constant splat
vectors. Doing this early helps making certain folds on vector types,
simplifying the code required for target DAGCombines that are enabled
before Type legalization.
Somewhat to my surprise, DAGCombine doesn't seem to traverse the
DAG in a post-order DFS, so at the time of doing some custom fold where
the input is a MUL, DAGCombiner::visitMUL hasn't yet reordered the
constant splat to the RHS.
This patch leads to a few improvements, but also a few minor regressions,
which I traced down to D46492. When I tried reverting this change to see
if the changes were still necessary, I ran into some segfaults. Not sure
if there is some latent bug there.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117794
Split vp.reduction.* intrinsics by splitting the vector to reduce in
two halves, perform the reduction operation in each one of them and
accumulate the results of both operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117469
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
Original patch by @hussainjk.
This patch was split off from D109377 to keep vector legalization
(widening/splitting) separate from vector element legalization
(promoting).
While the original patch added a third overload of
SelectionDAG::getVPStore, this patch takes the liberty of collapsing
those all down to 1, as three overloads seems excessive for a
little-used node.
The original patch also used ModifyToType in places, but that method
still crashes on scalable vector types. Seeing as the other VP
legalization methods only work when all operands need identical
widening, this patch follows in that vein.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117235
This commit sometimes causes a crash when compiling a vtable thunk. E.g.:
clang '--target=aarch64-grtev4-linux-gnu' -xc++ - -c -o /dev/null <<EOF
struct a {
virtual int f();
};
struct c {
virtual int &g() const;
};
struct d : a, c {
int &g() const;
};
int &d::g() const {}
EOF
Some follow-up commits have been reverted as well:
Revert "IR: Make getRetAlign check callee function attributes"
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
This reverts commit 4f414af6a7.
This reverts commit a5507d2e25.
This reverts commit 3d2d208f6a.
This reverts commit 07ddfa95e3.
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/dag-numsignbits.ll
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
These nodes should saturate to their saturating VT. We can use this
information to know the bits past the VT are all zeros or all sign bits.
I think we might only have test coverage for the unsigned case. I'll
verify and add tests.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116870
Split vp.select in a similar way as vselect, splitting also the length
parameter.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116651
This function returns an upper bound on the number of bits needed
to represent the signed value. Use "Max" to match similar functions
in KnownBits like countMaxActiveBits.
Rename APInt::getMinSignedBits->getSignificantBits. Keeping the old
name around to keep this patch size down. Will do a bulk rename as
follow up.
Rename KnownBits::countMaxSignedBits->countMaxSignificantBits.
Reviewed By: lebedev.ri, RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D116522
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch merges FoldConstantVectorArithmetic back into FoldConstantArithmetic.
Like FoldConstantVectorArithmetic we now handle vector ops with any operand count, but we currently still only handle binops for scalar types - this can be improved in future patches - in particular some common unary/trinary ops still have poor constant folding.
There's one change in functionality causing test changes - FoldConstantVectorArithmetic bails early if the build/splat vector isn't all constant (with some undefs) elements, but FoldConstantArithmetic doesn't - it instead attempts to fold the scalar nodes and bails if they fail to regenerate a constant/undef result, allowing some additional identity/undef patterns to be handled.
Differential Revision: https://reviews.llvm.org/D113300
As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
We have several places where we need to extract the raw bits data from a BUILD_VECTOR node, so consolidate this to a single helper function that handles Undefs and Integer/FP constants, including implicit truncation.
This should make it easier to extend D113202 to handle more constant folding of bitcasted constant data.
Differential Revision: https://reviews.llvm.org/D113351
Another minor step towards merging FoldConstantVectorArithmetic into FoldConstantArithmetic.
We don't use SDNodeFlags in any constant folding inside DAG, so passing the Flags argument is a waste of time - an alternative would be to wire up FoldConstantArithmetic to take SDNodeFlags just-in-case we someday start using it, but we don't have any way to test it and I'd prefer to avoid dead code.
Differential Revision: https://reviews.llvm.org/D113276
NumOps represents the number of elements for vector constant folding, rename this NumElts so in future we can the consistently use NumOps to represent the number of operands of the opcode.
Minor cleanup before trying to begin generalizing FoldConstantArithmetic to support opcodes other than binops.
To constant fold bitwise logic ops where we've legalized constant build vectors to a different type (e.g. v2i64 -> v4i32), this patch adds a basic ability to peek through the bitcasts and perform the constant fold on the inner operands.
The MVE predicate v2i64 regressions will be addressed by future support for basic v2i64 type support.
One of the yak shaving fixes for D113192....
Differential Revision: https://reviews.llvm.org/D113202
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
When splitting a masked load, `GetDependentSplitDestVTs` is used to get the
MemVTs of the high and low parts. If the masked load is extended, this
may return VTs with different element types which are used to create the
high & low masked load instructions.
This patch changes `GetDependentSplitDestVTs` to ensure we return VTs with
the same element type.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111996
This patch adds patterns to match the following with INC/DEC:
- @llvm.aarch64.sve.cnt[b|h|w|d] intrinsics + ADD/SUB
- vscale + ADD/SUB
For some implementations of SVE, INC/DEC VL is not as cheap as ADD/SUB and
so this behaviour is guarded by the "use-scalar-inc-vl" feature flag, which for SVE
is off by default. There are no known issues with SVE2, so this feature is
enabled by default when targeting SVE2.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111441
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We can use the raw_string_ostream::str() method to perform the implicit flush() and return a reference to the std::string container that we can then wrap inside Twine().
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
This patch adds a generic DAGCombine for vector-predicated (VP) nodes.
Those for which we can determine that no vector element is active can be
replaced by either undef or, for reductions, the start value.
This is tested rather trivially at the IR level, where it's possible
that we want to teach instcombine to perform this optimization.
However, we can also see the zero-evl case arise during SelectionDAG
legalization, when wide VP operations can be split into two and the
upper operation emerges as trivially false.
It's possible that we could perform this optimization "proactively"
(both on legal vectors and before splitting) and reduce the width of an
operation and insert it into a larger undef vector:
```
v8i32 vp_add x, y, mask, 4
->
v8i32 insert_subvector (v8i32 undef), (v4i32 vp_add xsub, ysub, mask, 4), i32 0
```
This is somewhat analogous to similar vector narrow/widening
optimizations, but it's unclear at this point whether that's beneficial
to do this for VP ops for any/all targets.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D109148
APInt is used to describe a bit mask in a variety of value tracking and demanded bits/elts functions.
When traversing through dst/src operands, we have a number of places where these masks need to widened/narrowed to translate through bitcasts, reductions etc. to a different type.
This patch add a APIntOps::ScaleBitMask common helper, adds unit test coverage, and updates a number of cases to use the the helper instead of their own implementation.
This came up on D109065 where we currently have to add yet another implementation of the same code.
Differential Revision: https://reviews.llvm.org/D109683
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
Followup to D99355: SDAG support for vector-predicated load/store/gather/scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105871
Guillaume Chatelet