Split vp.reduction.* intrinsics by splitting the vector to reduce in
two halves, perform the reduction operation in each one of them and
accumulate the results of both operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117469
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
Original patch by @hussainjk.
This patch was split off from D109377 to keep vector legalization
(widening/splitting) separate from vector element legalization
(promoting).
While the original patch added a third overload of
SelectionDAG::getVPStore, this patch takes the liberty of collapsing
those all down to 1, as three overloads seems excessive for a
little-used node.
The original patch also used ModifyToType in places, but that method
still crashes on scalable vector types. Seeing as the other VP
legalization methods only work when all operands need identical
widening, this patch follows in that vein.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117235
This commit sometimes causes a crash when compiling a vtable thunk. E.g.:
clang '--target=aarch64-grtev4-linux-gnu' -xc++ - -c -o /dev/null <<EOF
struct a {
virtual int f();
};
struct c {
virtual int &g() const;
};
struct d : a, c {
int &g() const;
};
int &d::g() const {}
EOF
Some follow-up commits have been reverted as well:
Revert "IR: Make getRetAlign check callee function attributes"
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
This reverts commit 4f414af6a7.
This reverts commit a5507d2e25.
This reverts commit 3d2d208f6a.
This reverts commit 07ddfa95e3.
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/dag-numsignbits.ll
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
These nodes should saturate to their saturating VT. We can use this
information to know the bits past the VT are all zeros or all sign bits.
I think we might only have test coverage for the unsigned case. I'll
verify and add tests.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116870
Split vp.select in a similar way as vselect, splitting also the length
parameter.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116651
This function returns an upper bound on the number of bits needed
to represent the signed value. Use "Max" to match similar functions
in KnownBits like countMaxActiveBits.
Rename APInt::getMinSignedBits->getSignificantBits. Keeping the old
name around to keep this patch size down. Will do a bulk rename as
follow up.
Rename KnownBits::countMaxSignedBits->countMaxSignificantBits.
Reviewed By: lebedev.ri, RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D116522
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch merges FoldConstantVectorArithmetic back into FoldConstantArithmetic.
Like FoldConstantVectorArithmetic we now handle vector ops with any operand count, but we currently still only handle binops for scalar types - this can be improved in future patches - in particular some common unary/trinary ops still have poor constant folding.
There's one change in functionality causing test changes - FoldConstantVectorArithmetic bails early if the build/splat vector isn't all constant (with some undefs) elements, but FoldConstantArithmetic doesn't - it instead attempts to fold the scalar nodes and bails if they fail to regenerate a constant/undef result, allowing some additional identity/undef patterns to be handled.
Differential Revision: https://reviews.llvm.org/D113300
As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
We have several places where we need to extract the raw bits data from a BUILD_VECTOR node, so consolidate this to a single helper function that handles Undefs and Integer/FP constants, including implicit truncation.
This should make it easier to extend D113202 to handle more constant folding of bitcasted constant data.
Differential Revision: https://reviews.llvm.org/D113351
Another minor step towards merging FoldConstantVectorArithmetic into FoldConstantArithmetic.
We don't use SDNodeFlags in any constant folding inside DAG, so passing the Flags argument is a waste of time - an alternative would be to wire up FoldConstantArithmetic to take SDNodeFlags just-in-case we someday start using it, but we don't have any way to test it and I'd prefer to avoid dead code.
Differential Revision: https://reviews.llvm.org/D113276
NumOps represents the number of elements for vector constant folding, rename this NumElts so in future we can the consistently use NumOps to represent the number of operands of the opcode.
Minor cleanup before trying to begin generalizing FoldConstantArithmetic to support opcodes other than binops.
To constant fold bitwise logic ops where we've legalized constant build vectors to a different type (e.g. v2i64 -> v4i32), this patch adds a basic ability to peek through the bitcasts and perform the constant fold on the inner operands.
The MVE predicate v2i64 regressions will be addressed by future support for basic v2i64 type support.
One of the yak shaving fixes for D113192....
Differential Revision: https://reviews.llvm.org/D113202
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
When splitting a masked load, `GetDependentSplitDestVTs` is used to get the
MemVTs of the high and low parts. If the masked load is extended, this
may return VTs with different element types which are used to create the
high & low masked load instructions.
This patch changes `GetDependentSplitDestVTs` to ensure we return VTs with
the same element type.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111996
This patch adds patterns to match the following with INC/DEC:
- @llvm.aarch64.sve.cnt[b|h|w|d] intrinsics + ADD/SUB
- vscale + ADD/SUB
For some implementations of SVE, INC/DEC VL is not as cheap as ADD/SUB and
so this behaviour is guarded by the "use-scalar-inc-vl" feature flag, which for SVE
is off by default. There are no known issues with SVE2, so this feature is
enabled by default when targeting SVE2.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111441
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We can use the raw_string_ostream::str() method to perform the implicit flush() and return a reference to the std::string container that we can then wrap inside Twine().
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
This patch adds a generic DAGCombine for vector-predicated (VP) nodes.
Those for which we can determine that no vector element is active can be
replaced by either undef or, for reductions, the start value.
This is tested rather trivially at the IR level, where it's possible
that we want to teach instcombine to perform this optimization.
However, we can also see the zero-evl case arise during SelectionDAG
legalization, when wide VP operations can be split into two and the
upper operation emerges as trivially false.
It's possible that we could perform this optimization "proactively"
(both on legal vectors and before splitting) and reduce the width of an
operation and insert it into a larger undef vector:
```
v8i32 vp_add x, y, mask, 4
->
v8i32 insert_subvector (v8i32 undef), (v4i32 vp_add xsub, ysub, mask, 4), i32 0
```
This is somewhat analogous to similar vector narrow/widening
optimizations, but it's unclear at this point whether that's beneficial
to do this for VP ops for any/all targets.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D109148
APInt is used to describe a bit mask in a variety of value tracking and demanded bits/elts functions.
When traversing through dst/src operands, we have a number of places where these masks need to widened/narrowed to translate through bitcasts, reductions etc. to a different type.
This patch add a APIntOps::ScaleBitMask common helper, adds unit test coverage, and updates a number of cases to use the the helper instead of their own implementation.
This came up on D109065 where we currently have to add yet another implementation of the same code.
Differential Revision: https://reviews.llvm.org/D109683
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
Followup to D99355: SDAG support for vector-predicated load/store/gather/scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105871
If all demanded elements of the BUILD_VECTOR pass a isGuaranteedNotToBeUndefOrPoison check, then we can treat this specific demanded use of the BUILD_VECTOR as guaranteed not to be undef or poison either.
Differential Revision: https://reviews.llvm.org/D107174
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
I've setup the basic framework for the isGuaranteedNotToBeUndefOrPoison call and updated DAGCombiner::visitFREEZE to use it, further Opcodes can be handled when we have test coverage.
I'm not aware of any vector test freeze coverage so the DemandedElts (and the Depth) args are not being used yet - but they are in place.
SelectionDAG::isGuaranteedNotToBePoison wrappers have also been added.
Differential Revision: https://reviews.llvm.org/D106668
The existing rule about the operand type is strange. Instead, just say
the operand is a TargetConstant with the right width. (Legalization
ignores TargetConstants, so it doesn't matter if that width is legal.)
Highlights:
1. I had to substantially rewrite the AArch64 isel patterns to expect a
TargetConstant. Nothing too exotic, but maybe a little hairy. Maybe
worth considering a target-specific node with some dagcombines instead
of this complicated nest of isel patterns.
2. Our behavior on RV32 for vectors of i64 has changed slightly. In
particular, we correctly preserve the width of the arithmetic through
legalization. This changes the DAG a bit. Maybe room for
improvement here.
3. I explicitly defined the behavior around overflow. This is necessary
to make the DAGCombine transforms legal, and I don't think it causes any
practical issues.
Differential Revision: https://reviews.llvm.org/D105673
RISCV would prefer a sign extended constant since that works better
with our constant materialization. We have an existing TLI hook we
use to control sign extension of setcc operands in type legalization.
That hook happens to do the right check we need here, but might be
straying from its original purpose. With only RISCV defining this
hook in tree, I wasn't sure if it was worth adding another hook
with identical behavior.
This is an alternative to D105785 where I tried to handle this in
the RISCV backend by not creating ANY_EXTENDs in some places.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105918
This reverts commit 2a419a0b99.
The result of a shufflevector must not propagate poison from any element
other than the one noted in the shuffle mask.
The regressions outside of fptoui-may-overflow.ll can probably be
recovered some other way; for example, using isGuaranteedNotToBePoison.
See discussion on https://reviews.llvm.org/D106053 for more background.
Differential Revision: https://reviews.llvm.org/D106222
Add an assertion that we've calling MaskedElementsAreZero with a vector op and that the DemandedElts arg is a matching width.
Makes the error a lot easier to grok when something else accidentally gets used.
This is mostly a minor convenience, but the pattern seems frequent
enough to be worthwhile (and we'll probably add more uses in the
future).
Differential Revision: https://reviews.llvm.org/D105850
This sets the AllowTruncation flag on isConstOrConstSplat in
isNullOrNullSplat, allowing it to see truncated constant zeroes on
architectures such as AArch64, where only a i32.i64 are legal. As a
truncation of 0 is always 0, this should always be valid, allowing some
extra folding to happen including some of the cases from D103755.
Differential Revision: https://reviews.llvm.org/D103756
This patch extends the SelectionDAG's ability to constant-fold vector
arithmetic to include support for SPLAT_VECTOR. This is not only for
scalable-vector types but also for fixed-length vector types, which
helps Hexagon in a couple of cases.
The original RISC-V test case was in fact an infinite DAGCombine loop.
The pattern `and (truncate v1), (truncate v2)` can be combined to
`truncate (and v1, v2)` but the truncate can similarly be combined back
to `truncate (and v1, v2)` (but, crucially, only when one of `v1` or
`v2` is a constant vector).
It wasn't exposed in on fixed-length types because a TRUNCATE of a
constant BUILD_VECTOR was folded into the BUILD_VECTOR itself, whereas
this did not happen for the equivalent (scalable-vector) SPLAT_VECTOR.
Reviewed By: RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D103246
- When memory intrinsics, such as memcpy, the attached scoped AA
metadata is not passed down to the backend. As a result, the backend
cannot schedule relevant memory operations around them following that
hint. In this patch, SelectionDAG is enhanced to propagate that
metadata (scoped AA only) when they are lowered into loads and stores.
Differential Revision: https://reviews.llvm.org/D102215
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Re-landed again after D102819 fixed PowerPC to correctly zero-extend all
of its atomics as it claimed to do, since the combination of that bug
and this optimisation caused buildbot regressions.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
This seems to have broken sanitizers, giving lots of
Assertion `NumBits <= MAX_INT_BITS && "bitwidth too large"' failed.
failures across multiple targets (currently X86 and PowerPC). Reverting
until I have a chance to reproduce and debug.
This reverts commit 6e876f9ded.
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
It is proper to relax non-negative limitation of step_vector.
Also this patch adds more combines for step_vector:
(sub X, step_vector(C)) -> (add X, step_vector(-C))
Differential Revision: https://reviews.llvm.org/D100812
This patch relaxes the requirement that the STEP_VECTOR step constant
must be of a type at least as large as the vector element type. This
does not permit its use on targets which have legal vector element types
larger than the largest legal scalar type, such as i64 vectors on RV32.
As such, the requirement has been loosened so that the step operand must
be any scalar type so long as the constant immediate is non-negative and
the value fits inside the vector element type.
This limits combining optimizations in certain circumstances but in
practice it's unlikely to be a hindrance.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100660
During SelectionDAG, we must track the SDNodes that each SDDbgValue depends on
to compute its value. These are ultimately derived from the location operands to
the SDDbgValue, but were stored in a separate vector prior to this patch. This
resulted in cases where one of the lists was updated incorrectly, resulting in
crashes during compilation. This patch fixes the issue by directly recomputing
the dependency list from the SDDbgOperands in getDependencies().
Differential Revision: https://reviews.llvm.org/D99423
This allows FoldConstantArithmetic to handle SPLAT_VECTOR in
addition to BUILD_VECTOR. This allows it to support scalable
vectors. I'm also allowing fixed length SPLAT_VECTOR which is
used by some targets, but I'm not familiar enough to write tests
for those targets.
I had to block this function from running on CONCAT_VECTORS to
avoid calling getNode for a CONCAT_VECTORS of 2 scalars.
This can happen because the 2 operand getNode calls this
function for any opcode. Previously we were protected because
CONCAT_VECTORs of BUILD_VECTOR is folded to a larger BUILD_VECTOR
before that call. But it's not always possible to fold a CONCAT_VECTORS
of SPLAT_VECTORs, and we don't even try.
This fixes PR49781 where DAG combine thought constant folding
should be possible, but FoldConstantArithmetic couldn't do it.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D99682
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
This patch adds a new llvm.experimental.stepvector intrinsic,
which takes no arguments and returns a linear integer sequence of
values of the form <0, 1, ...>. It is primarily intended for
scalable vectors, although it will work for fixed width vectors
too. It is intended that later patches will make use of this
new intrinsic when vectorising induction variables, currently only
supported for fixed width. I've added a new CreateStepVector
method to the IRBuilder, which will generate a call to this
intrinsic for scalable vectors and fall back on creating a
ConstantVector for fixed width.
For scalable vectors this intrinsic is lowered to a new ISD node
called STEP_VECTOR, which takes a single constant integer argument
as the step. During lowering this argument is set to a value of 1.
The reason for this additional argument at the codegen level is
because in future patches we will introduce various generic DAG
combines such as
mul step_vector(1), 2 -> step_vector(2)
add step_vector(1), step_vector(1) -> step_vector(2)
shl step_vector(1), 1 -> step_vector(2)
etc.
that encourage a canonical format for all targets. This hopefully
means all other targets supporting scalable vectors can benefit
from this too.
I've added cost model tests for both fixed width and scalable
vectors:
llvm/test/Analysis/CostModel/AArch64/neon-stepvector.ll
llvm/test/Analysis/CostModel/AArch64/sve-stepvector.ll
as well as codegen lowering tests for fixed width and scalable
vectors:
llvm/test/CodeGen/AArch64/neon-stepvector.ll
llvm/test/CodeGen/AArch64/sve-stepvector.ll
See this thread for discussion of the intrinsic:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/147943.html
Reuse the existing KnownBits multiplication code to handle the 'extend + multiply + extract high bits' pattern for multiply-high ops.
Noticed while looking at the codegen for D88785 / D98587 - the patch helps division-by-constant expansion code in particular, which suggests that we might have some further KnownBits div/rem cases we could handle - but this was far easier to implement.
Differential Revision: https://reviews.llvm.org/D98857
Add ISD::ABS to the existing unary instructions handling for splat detection
This is similar to D83605, but doesn't appear to need to touch any of the wasm refactoring.
Differential Revision: https://reviews.llvm.org/D98778
This patch addresses a few issues when dealing with scalable-vector
INSERT_SUBVECTOR and EXTRACT_SUBVECTOR nodes.
When legalizing in DAGTypeLegalizer::SplitVecRes_INSERT_SUBVECTOR, we
store the low and high halves to the stack separately. The offset for
the high half was calculated incorrectly.
Additionally, we can optimize this process when we can detect that the
subvector is contained entirely within the low/high split vector type.
While this optimization is valid on scalable vectors, when performing
the 'high' optimization, the subvector must also be a scalable vector.
Note that the 'low' optimization is still conservative: it may be
possible to insert v2i32 into the low half of a split nxv1i32/nxv1i32,
but we can't guarantee it. It is always possible to insert v2i32 into
nxv2i32 or v2i32 into nxv4i32+2 as we know vscale is at least 1.
Lastly, in SelectionDAG::isSplatValue, we early-exit on the extracted subvector value
type being a scalable vector, forgetting that we can also extract a
fixed-length vector from a scalable one.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98495
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
This patch adds partial support in Instruction Selection for dbg.values that use
a DIArgList. This patch does not add support for producing DBG_VALUE_LIST, but
adds the logic for processing DIArgLists within the ISel pass. This change is
largely focused on handleDebugValue and some of the functions that it calls.
Outside of this, salvageDebugInfo and transferDbgValues have been modified to
replace individual operands instead of the entire value; dangling debug info for
variadic debug values is not currently supported (but may be added later).
Differential Revision: https://reviews.llvm.org/D88589
This patch modifies the class that represents debug values during ISel,
SDDbgValue, to support multiple location operands (to represent a dbg.value that
uses a DIArgList). Part of this class's functionality has been split off into a
new class, SDDbgOperand.
The new class SDDbgOperand represents a single value, corresponding to an SSA
value or MachineOperand in the IR and MIR respectively. Members of SDDbgValue
that were previously related to that specific value (as opposed to the
variable or DIExpression), such as the Kind enum, have been moved to
SDDbgOperand. SDDbgValue now contains an array of SDDbgOperand instead, allowing
it to hold more than one of these values.
All changes outside SDDbgValue are simply updates to use the new interface.
Differential Revision: https://reviews.llvm.org/D88585
The result of ISD::USUBSAT will never be larger than the LHS. We
can use this to put a bound on the number of leading zeros.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D98133
I'm not sure this would catch all such issues, but it would catch some.
The problem for PR49393 was that we were holding a reference to a node that
wasn't connect edto the DAG across a function that could delete unused nodes. In
this particular case we managed to try to use the deleted node while it was in
the deleted state before its memory got recycled.
It could also happen that we delete the node, something allocates a new node
which recycles the memory. Then we try to use the reference we were holding and
it is now a completely different node with different valid opcode. This patch
would not catch that.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D97969
This patch addresses issues arising from the fact that the index type
used for subvector insertion/extraction is inconsistent between the
intrinsics and SDNodes. The intrinsic forms require i64 whereas the
SDNodes use the type returned by SelectionDAG::getVectorIdxTy.
Rather than update the intrinsic definitions to use an overloaded index
type, this patch fixes the issue by transforming the index to the
correct type as required. Any loss of index bits going from i64 to a
smaller type is unexpected, and will be caught by an assertion in
SelectionDAG::getVectorIdxConstant.
The patch also updates the documentation for INSERT_SUBVECTOR and adds
an assertion to its creation to bring it in line with EXTRACT_SUBVECTOR.
This necessitated changes to AArch64 which was using i64 for
EXTRACT_SUBVECTOR but i32 for INSERT_SUBVECTOR. Only one test changed
its codegen after updating the backend accordingly.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D97459
When calling SelectionDAG::getNode() to create an ADD or SUB
of two vectors with i1 element types we can canonicalise this
to use XOR instead, where 1+1 is treated as wrapping around
to 0 and 0-1 wraps to 1.
I've added the following tests for SVE targets:
CodeGen/AArch64/sve-pred-arith.ll
and modified some X86 tests to reflect the much simpler codegen
required.
Differential Revision: https://reviews.llvm.org/D97276
This also removes a pattern from RISCV that is no longer needed
since the sexti32 on the LHS of the srem in the pattern implies
the result is sign extended so the sign_extend_inreg should be
removed in DAG combine now.
Reviewed By: luismarques, RKSimon
Differential Revision: https://reviews.llvm.org/D97133
This patch adds support for scalable-vector splats in DAGCombiner's
`isConstantOrConstantVector` and `ISD::matchUnaryPredicate` functions,
which enable the SelectionDAG div/rem-by-constant optimizations for
scalable vector types.
It also fixes up one case where the UDIV optimization was generating a
SETCC without first consulting the target for its preferred SETCC result
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94501
Even if we know nothing about LHS, it can still be useful to know that
smax(LHS, RHS) >= RHS and smin(LHS, RHS) <= RHS.
Differential Revision: https://reviews.llvm.org/D87145
This improves llvm::isConstOrConstSplat by allowing it to analyze
ISD::SPLAT_VECTOR nodes, in order to allow more constant-folding of
operations using scalable vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94168
The TableGen immAllOnesV and immAllZerosV helpers implicitly wrapped the
ISD::isBuildVectorAll(Ones|Zeros) helper functions. This was inhibiting
their use for targets such as RISC-V which use ISD::SPLAT_VECTOR. In
particular, RISC-V had to define its own 'vnot' fragment.
In order to extend the scope of these nodes to include support for
ISD::SPLAT_VECTOR, two new ISD predicate functions have been introduced:
ISD::isConstantSplatVectorAll(Ones|Zeros). These effectively supersede
the older "isBuildVector" predicates, which are now simple wrappers for
the new functions. They pass a defaulted boolean toggle which preserves
the old behaviour. It is hoped that in time all call-sites can be ported
to the "isConstantSplatVector" functions.
While the use of ISD::isBuildVectorAll(Ones|Zeros) has not changed, the
behaviour of the TableGen immAll(Ones|Zeros)V **has**. To test the new
functionality, the custom RISC-V TableGen fragment has been removed and
replaced with the built-in 'vnot'. To test their use as pattern-roots, two
splat patterns have been updated accordingly.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94223
This implements vp_add, vp_and for the VE target by lowering them to the
VVP_* layer. We also add helper functions for VP SDNodes (isVPSDNode,
getVPMaskIdx, getVPExplicitVectorLengthIdx).
Reviewed By: kaz7
Differential Revision: https://reviews.llvm.org/D93766
Subvector broadcasts are only load instructions, yet X86ISD::SUBV_BROADCAST treats them more generally, requiring a lot of fallback tablegen patterns.
This initial patch replaces constant vector lowering inside lowerBuildVectorAsBroadcast with direct X86ISD::SUBV_BROADCAST_LOAD loads which helps us merge a number of equivalent loads/broadcasts.
As well as general plumbing/analysis additions for SUBV_BROADCAST_LOAD, I needed to wrap SelectionDAG::makeEquivalentMemoryOrdering so it can handle result chains from non generic LoadSDNode nodes.
Later patches will continue to replace X86ISD::SUBV_BROADCAST usage.
Differential Revision: https://reviews.llvm.org/D92645
This method previously always recursively checked both the left-hand
side and right-hand side of binary operations for splatted (broadcast)
vector values to determine if the parent DAG node is a splat.
Like several other SelectionDAG methods, limit the recursion depth to
MaxRecursionDepth (6). This prevents stack overflow.
See also https://issuetracker.google.com/173785481
Patch by Nicolas Capens. Thanks!
Differential Revision: https://reviews.llvm.org/D92421
Adds the ExtensionType flag, which reflects the LoadExtType of a MaskedGatherSDNode.
Also updated SelectionDAGDumper::print_details so that details of the gather
load (is signed, is scaled & extension type) are printed.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91084
Lowers the llvm.masked.gather intrinsics (scalar plus vector addressing mode only)
Changes in this patch:
- Add custom lowering for MGATHER, using getGatherVecOpcode() to choose the appropriate
gather load opcode to use.
- Improve codegen with refineIndexType/refineUniformBase, added in D90942
- Tests added for gather loads with 32 & 64-bit scaled & unscaled offsets.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91092
Updated the affected scalable_of_scalable tests in sve-gep.ll, as isConstantSplatValue now returns true in DAGCombiner::visitMUL and folds `(mul x, 1) -> x`
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91363
`SimplifySetCC` invokes `getNodeIfExists` without passing `Flags` argument and `getNodeIfExists` uses a default `SDNodeFlags` to intersect the original flags, as a consequence, flags like `nsw` is dropped. Added a new helper function `doesNodeExist` to check if a node exists without modifying its flags.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D89938
This change introduces a MIR target-independent pseudo instruction corresponding to the IR intrinsic llvm.pseudoprobe for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
An `llvm.pseudoprobe` intrinsic call will be lowered into a target-independent operation named `PSEUDO_PROBE`. Given the following instrumented IR,
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
the corresponding MIR is shown below. Note that block `bb3` is duplicated into `bb1` and `bb2` where its probe is duplicated too. This allows for an accurate execution count to be collected for `bb3`, which is basically the sum of the counts of `bb1` and `bb2`.
```
bb.0.bb0:
frame-setup PUSH64r undef $rax, implicit-def $rsp, implicit $rsp
TEST32rr killed renamable $edi, renamable $edi, implicit-def $eflags
PSEUDO_PROBE 837061429793323041, 1, 0
$edi = MOV32ri 1, debug-location !13; test.c:0
JCC_1 %bb.1, 4, implicit $eflags
bb.2.bb2:
PSEUDO_PROBE 837061429793323041, 3, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
bb.1.bb1:
PSEUDO_PROBE 837061429793323041, 2, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
```
The target op PSEUDO_PROBE will be converted into a piece of binary data by the object emitter with no machine instructions generated. This is done in a different patch.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86495
We have a frequent pattern where we're merging two KnownBits to get the common/shared bits, and I just fell for the gotcha where I tried to use the & operator to merge them........
Lowers the llvm.masked.scatter intrinsics (scalar plus vector addressing mode only)
Changes included in this patch:
- Custom lowering for MSCATTER, which chooses the appropriate scatter store opcode to use.
Floating-point scatters are cast to integer, with patterns added to match FP reinterpret_casts.
- Added the getCanonicalIndexType function to convert redundant addressing
modes (e.g. scaling is redundant when accessing bytes)
- Tests with 32 & 64-bit scaled & unscaled offsets
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90941
This patch adds the IsTruncatingStore flag to MaskedScatterSDNode, set by getMaskedScatter().
Updated SelectionDAGDumper::print_details for MaskedScatterSDNode to print
the details of masked scatters (is truncating, signed or scaled).
This is the first in a series of patches which adds support for scalable masked scatters
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90939
Hook up legalizations for VECREDUCE_SEQ_FMUL. This is following up on the VECREDUCE_SEQ_FADD work from D90247.
Differential Revision: https://reviews.llvm.org/D90644
This patch uses the existing LowerFixedLengthReductionToSVE function to also lower
scalable vector reductions. A separate function has been added to lower VECREDUCE_AND
& VECREDUCE_OR operations with predicate types using ptest.
Lowering scalable floating-point reductions will be addressed in a follow up patch,
for now these will hit the assertion added to expandVecReduce() in TargetLowering.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D89382
As discussed on D90527, we should be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
Add Legalization support for VECREDUCE_SEQ_FADD, so that we don't need to depend on ExpandReductionsPass.
Differential Revision: https://reviews.llvm.org/D90247
Replace the X86 specific isSplatZeroExtended helper with a generic BuildVectorSDNode method.
I've just used this to simplify the X86ISD::BROADCASTM lowering so far (and remove isSplatZeroExtended), but we should be able to use this in more places to lower to complex broadcast patterns.
Differential Revision: https://reviews.llvm.org/D87930
Simon Pilgrim