mirror of https://github.com/RT-Thread/rt-thread
bsp/stm32：Separate STM32F2 HAL drivers (#10210)
This commit is contained in:
沐攸
GitHub
parent
c7c8d9d6ef
commit
e347305ad0
|
|
@ -17,6 +17,7 @@ config SOC_SERIES_STM32F2
|
|||
bool
|
||||
select ARCH_ARM_CORTEX_M3
|
||||
select SOC_FAMILY_STM32
|
||||
select PKG_USING_STM32F2_HAL_DRIVER
|
||||
|
||||
config SOC_SERIES_STM32F3
|
||||
bool
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -1,191 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32F2xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32F2xx device used in the target application
|
||||
* - To use or not the peripheral’s drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral’s registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __STM32F2xx_H
|
||||
#define __STM32F2xx_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32F2)
|
||||
#define STM32F2
|
||||
#endif /* STM32F2 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32 device used in your
|
||||
application
|
||||
*/
|
||||
#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
|
||||
|
||||
/* #define STM32F205xx */ /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
|
||||
STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
|
||||
STM32F205RB and STM32F205VB Devices */
|
||||
/* #define STM32F215xx */ /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
|
||||
/* #define STM32F207xx */ /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
|
||||
STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
|
||||
/* #define STM32F217xx */ /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
|
||||
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number V2.2.5
|
||||
*/
|
||||
#define __STM32F2xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_SUB1 (0x02U) /*!< [23:16] sub1 version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_SUB2 (0x05U) /*!< [15:8] sub2 version */
|
||||
#define __STM32F2xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
||||
#define __STM32F2xx_CMSIS_VERSION ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
|
||||
|(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
|
||||
|(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
|
||||
|(__STM32F2xx_CMSIS_VERSION))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F205xx)
|
||||
#include "stm32f205xx.h"
|
||||
#elif defined(STM32F215xx)
|
||||
#include "stm32f215xx.h"
|
||||
#elif defined(STM32F207xx)
|
||||
#include "stm32f207xx.h"
|
||||
#elif defined(STM32F217xx)
|
||||
#include "stm32f217xx.h"
|
||||
#else
|
||||
#error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0U,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0U,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SUCCESS = 0U,
|
||||
ERROR = !SUCCESS
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macro
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32f2xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* __STM32F2xx_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,106 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f2xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device System Source File for STM32F2xx devices.
|
||||
****************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32F2XX_H
|
||||
#define __SYSTEM_STM32F2XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
|
||||
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
|
||||
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32F2XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because one or more lines are too long
|
|
@ -1,415 +0,0 @@
|
|||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f205xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F205xx devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000000
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,422 +0,0 @@
|
|||
******************* (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f207xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F207xx devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000000
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT DCMI_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
DCMI_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,417 +0,0 @@
|
|||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f215xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F215xx devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000000
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD 0 ; Reserved
|
||||
DCD CRYP_IRQHandler ; CRYPTO
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT CRYP_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
CRYP_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,423 +0,0 @@
|
|||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f217xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F217xx devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000000
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD CRYP_IRQHandler ; CRYPTO
|
||||
DCD HASH_RNG_IRQHandler ; Hash and Rng
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream6_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Stream7_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream0_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream4_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Stream7_IRQHandler [WEAK]
|
||||
EXPORT USART6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT OTG_HS_IRQHandler [WEAK]
|
||||
EXPORT DCMI_IRQHandler [WEAK]
|
||||
EXPORT CRYP_IRQHandler [WEAK]
|
||||
EXPORT HASH_RNG_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Stream0_IRQHandler
|
||||
DMA1_Stream1_IRQHandler
|
||||
DMA1_Stream2_IRQHandler
|
||||
DMA1_Stream3_IRQHandler
|
||||
DMA1_Stream4_IRQHandler
|
||||
DMA1_Stream5_IRQHandler
|
||||
DMA1_Stream6_IRQHandler
|
||||
ADC_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
DMA1_Stream7_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Stream0_IRQHandler
|
||||
DMA2_Stream1_IRQHandler
|
||||
DMA2_Stream2_IRQHandler
|
||||
DMA2_Stream3_IRQHandler
|
||||
DMA2_Stream4_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
DMA2_Stream5_IRQHandler
|
||||
DMA2_Stream6_IRQHandler
|
||||
DMA2_Stream7_IRQHandler
|
||||
USART6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
OTG_HS_IRQHandler
|
||||
DCMI_IRQHandler
|
||||
CRYP_IRQHandler
|
||||
HASH_RNG_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -1,495 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f205xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F205xx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl entry
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FSMC_IRQHandler /* FSMC */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,503 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f207xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F207xx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl entry
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FSMC_IRQHandler /* FSMC */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word 0 /* CRYP crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,496 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f215xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F215xx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl entry
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FSMC_IRQHandler /* FSMC */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word 0 /* Reserved */
|
||||
.word CRYP_IRQHandler /* CRYP crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRYP_IRQHandler
|
||||
.thumb_set CRYP_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,505 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f217xx.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F217xx Devices vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl entry
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FSMC_IRQHandler /* FSMC */
|
||||
.word SDIO_IRQHandler /* SDIO */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word CRYP_IRQHandler /* CRYP crypto */
|
||||
.word HASH_RNG_IRQHandler /* Hash and Rng */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak CRYP_IRQHandler
|
||||
.thumb_set CRYP_IRQHandler,Default_Handler
|
||||
|
||||
.weak HASH_RNG_IRQHandler
|
||||
.thumb_set HASH_RNG_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20020000;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20020000;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20020000;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20020000;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x2000FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20010000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
|
|
@ -1,602 +0,0 @@
|
|||
;/******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f205xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F20x/21x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.</center></h2>
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and RNG
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMP_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMP_STAMP_IRQHandler
|
||||
B TAMP_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK HASH_RNG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HASH_RNG_IRQHandler
|
||||
B HASH_RNG_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,618 +0,0 @@
|
|||
;/******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f207xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F20x/21x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.</center></h2>
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD 0 ; Reserved
|
||||
DCD HASH_RNG_IRQHandler ; Hash and RNG
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMP_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMP_STAMP_IRQHandler
|
||||
B TAMP_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK ETH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_IRQHandler
|
||||
B ETH_IRQHandler
|
||||
|
||||
PUBWEAK ETH_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_WKUP_IRQHandler
|
||||
B ETH_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK DCMI_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DCMI_IRQHandler
|
||||
B DCMI_IRQHandler
|
||||
|
||||
PUBWEAK HASH_RNG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HASH_RNG_IRQHandler
|
||||
B HASH_RNG_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,608 +0,0 @@
|
|||
;/******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f215xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F20x/21x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.</center></h2>
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD 0 ; Reserved
|
||||
DCD CRYP_IRQHandler ; CRYP crypto
|
||||
DCD HASH_RNG_IRQHandler ; Hash and RNG
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMP_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMP_STAMP_IRQHandler
|
||||
B TAMP_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK CRYP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CRYP_IRQHandler
|
||||
B CRYP_IRQHandler
|
||||
|
||||
PUBWEAK HASH_RNG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HASH_RNG_IRQHandler
|
||||
B HASH_RNG_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,623 +0,0 @@
|
|||
;/******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f217xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F20x/21x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;*******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.</center></h2>
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
|
||||
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
|
||||
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
|
||||
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
|
||||
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
|
||||
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
|
||||
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
|
||||
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
|
||||
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
|
||||
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
|
||||
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
|
||||
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
|
||||
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
|
||||
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
|
||||
DCD USART6_IRQHandler ; USART6
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
|
||||
DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
|
||||
DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
|
||||
DCD OTG_HS_IRQHandler ; USB OTG HS
|
||||
DCD DCMI_IRQHandler ; DCMI
|
||||
DCD CRYP_IRQHandler ; CRYP crypto
|
||||
DCD HASH_RNG_IRQHandler ; Hash and RNG
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMP_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMP_STAMP_IRQHandler
|
||||
B TAMP_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream0_IRQHandler
|
||||
B DMA1_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream1_IRQHandler
|
||||
B DMA1_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream2_IRQHandler
|
||||
B DMA1_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream3_IRQHandler
|
||||
B DMA1_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream4_IRQHandler
|
||||
B DMA1_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream5_IRQHandler
|
||||
B DMA1_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream6_IRQHandler
|
||||
B DMA1_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK ADC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC_IRQHandler
|
||||
B ADC_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Stream7_IRQHandler
|
||||
B DMA1_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream0_IRQHandler
|
||||
B DMA2_Stream0_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream1_IRQHandler
|
||||
B DMA2_Stream1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream2_IRQHandler
|
||||
B DMA2_Stream2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream3_IRQHandler
|
||||
B DMA2_Stream3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream4_IRQHandler
|
||||
B DMA2_Stream4_IRQHandler
|
||||
|
||||
PUBWEAK ETH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_IRQHandler
|
||||
B ETH_IRQHandler
|
||||
|
||||
PUBWEAK ETH_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_WKUP_IRQHandler
|
||||
B ETH_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream5_IRQHandler
|
||||
B DMA2_Stream5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream6_IRQHandler
|
||||
B DMA2_Stream6_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Stream7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Stream7_IRQHandler
|
||||
B DMA2_Stream7_IRQHandler
|
||||
|
||||
PUBWEAK USART6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART6_IRQHandler
|
||||
B USART6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_OUT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_OUT_IRQHandler
|
||||
B OTG_HS_EP1_OUT_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_EP1_IN_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_EP1_IN_IRQHandler
|
||||
B OTG_HS_EP1_IN_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_WKUP_IRQHandler
|
||||
B OTG_HS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK OTG_HS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_HS_IRQHandler
|
||||
B OTG_HS_IRQHandler
|
||||
|
||||
PUBWEAK DCMI_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DCMI_IRQHandler
|
||||
B DCMI_IRQHandler
|
||||
|
||||
PUBWEAK CRYP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CRYP_IRQHandler
|
||||
B CRYP_IRQHandler
|
||||
|
||||
PUBWEAK HASH_RNG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HASH_RNG_IRQHandler
|
||||
B HASH_RNG_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,344 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f2xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f2xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f2xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM mounted
|
||||
on STM322xG_EVAL board as data memory */
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable can be updated in Three ways :
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F2xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemFrequency variable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f2xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f2xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f2xx.s before jump to main.
|
||||
* This function configures the external SRAM mounted on STM322xG_EVAL board
|
||||
* This SRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
(void)(tmp);
|
||||
|
||||
/* Connect PDx pins to FSMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FSMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FSMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FSMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*--FSMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,86 +0,0 @@
|
|||
import rtconfig
|
||||
from building import *
|
||||
|
||||
# get current directory
|
||||
cwd = GetCurrentDir()
|
||||
|
||||
# The set of source files associated with this SConscript file.
|
||||
src = Split("""
|
||||
CMSIS/Device/ST/STM32F2xx/Source/Templates/system_stm32f2xx.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_dma.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_cortex.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_crc.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pwr.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rcc.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rcc_ex.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sram.c
|
||||
STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_gpio.c
|
||||
""")
|
||||
|
||||
if GetDepend(['RT_USING_SERIAL']) or GetDepend(['RT_USING_NANO', 'RT_USING_CONSOLE']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_uart.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_usart.c']
|
||||
|
||||
if GetDepend(['RT_USING_I2C']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_i2c.c']
|
||||
|
||||
if GetDepend(['RT_USING_SPI']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_spi.c']
|
||||
|
||||
if GetDepend(['RT_USING_USB']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pccard.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pcd.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_pcd_ex.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_ll_usb.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_hcd.c']
|
||||
|
||||
if GetDepend(['RT_USING_CAN']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_can.c']
|
||||
|
||||
if GetDepend(['RT_USING_HWTIMER']) or GetDepend(['RT_USING_PWM']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_tim.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_tim_ex.c']
|
||||
|
||||
if GetDepend(['BSP_USING_ETH']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_eth.c']
|
||||
|
||||
if GetDepend(['RT_USING_ADC']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_adc.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_adc_ex.c']
|
||||
|
||||
if GetDepend(['RT_USING_RTC']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rtc.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_rtc_ex.c']
|
||||
|
||||
if GetDepend(['RT_USING_WDT']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_iwdg.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_wwdg.c']
|
||||
|
||||
if GetDepend(['RT_USING_SDIO']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_mmc.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sd.c']
|
||||
|
||||
if GetDepend(['RT_USING_AUDIO']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_i2s.c']
|
||||
|
||||
if GetDepend(['RT_USING_MTD_NOR']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_nor.c']
|
||||
|
||||
if GetDepend(['RT_USING_MTD_NAND']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_nand.c']
|
||||
|
||||
if GetDepend(['BSP_USING_EXT_FMC_IO']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_sram.c']
|
||||
|
||||
if GetDepend(['BSP_USING_ON_CHIP_FLASH']):
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_flash.c']
|
||||
src += ['STM32F2xx_HAL_Driver/Src/stm32f2xx_hal_flash_ex.c']
|
||||
|
||||
path = [cwd + '/CMSIS/Device/ST/STM32F2xx/Include',
|
||||
cwd + '/STM32F2xx_HAL_Driver/Inc']
|
||||
|
||||
CPPDEFINES = ['USE_HAL_DRIVER']
|
||||
group = DefineGroup('Libraries', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
|
||||
|
||||
Return('group')
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,761 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_can_legacy.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CAN HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_CAN_LEGACY_H
|
||||
#define __STM32F2xx_HAL_CAN_LEGACY_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Types CAN Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
|
||||
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
|
||||
HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
|
||||
HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
|
||||
|
||||
}HAL_CAN_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Specifies the length of a time quantum.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the CAN operating mode.
|
||||
This parameter can be a value of @ref CAN_operating_mode */
|
||||
|
||||
uint32_t SJW; /*!< Specifies the maximum number of time quanta
|
||||
the CAN hardware is allowed to lengthen or
|
||||
shorten a bit to perform resynchronization.
|
||||
This parameter can be a value of @ref CAN_synchronisation_jump_width */
|
||||
|
||||
uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
|
||||
|
||||
uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
|
||||
|
||||
uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
}CAN_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN filter configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
|
||||
configuration, first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
|
||||
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
|
||||
configuration, second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
|
||||
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (MSBs for a 32-bit configuration,
|
||||
first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
|
||||
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (LSBs for a 32-bit configuration,
|
||||
second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
|
||||
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
|
||||
This parameter can be a value of @ref CAN_filter_FIFO */
|
||||
|
||||
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
|
||||
|
||||
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
|
||||
This parameter can be a value of @ref CAN_filter_mode */
|
||||
|
||||
uint32_t FilterScale; /*!< Specifies the filter scale.
|
||||
This parameter can be a value of @ref CAN_filter_scale */
|
||||
|
||||
uint32_t FilterActivation; /*!< Enable or disable the filter.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
uint32_t BankNumber; /*!< Select the start slave bank filter.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
|
||||
|
||||
}CAN_FilterConfTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Tx message structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_Identifier_Type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
|
||||
|
||||
uint8_t Data[8]; /*!< Contains the data to be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
}CanTxMsgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Rx message structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
|
||||
This parameter can be a value of @ref CAN_Identifier_Type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the received message.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be received.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
|
||||
|
||||
uint8_t Data[8]; /*!< Contains the data to be received.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
|
||||
This parameter can be CAN_FIFO0 or CAN_FIFO1 */
|
||||
|
||||
}CanRxMsgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
CAN_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
CAN_InitTypeDef Init; /*!< CAN required parameters */
|
||||
|
||||
CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
|
||||
|
||||
CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
|
||||
|
||||
CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
|
||||
|
||||
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< CAN locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< CAN Error code
|
||||
This parameter can be a value of @ref CAN_Error_Code */
|
||||
}CAN_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Constants CAN Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Error_Code CAN Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */
|
||||
#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */
|
||||
#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */
|
||||
#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */
|
||||
#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */
|
||||
#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */
|
||||
#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */
|
||||
#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */
|
||||
#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */
|
||||
#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */
|
||||
#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */
|
||||
#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_InitStatus CAN InitStatus
|
||||
* @{
|
||||
*/
|
||||
#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
|
||||
#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_operating_mode CAN Operating Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_MODE_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
|
||||
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
|
||||
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
|
||||
* @{
|
||||
*/
|
||||
#define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
|
||||
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
|
||||
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
|
||||
#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
|
||||
#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
|
||||
#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
|
||||
#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
|
||||
#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
|
||||
#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
|
||||
#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
|
||||
#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
|
||||
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
|
||||
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
|
||||
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS2_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
|
||||
#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
|
||||
#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
|
||||
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_mode CAN Filter Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
|
||||
#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_scale CAN Filter Scale
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
|
||||
#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_FIFO CAN Filter FIFO
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
|
||||
#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Identifier_Type CAN Identifier Type
|
||||
* @{
|
||||
*/
|
||||
#define CAN_ID_STD 0x00000000U /*!< Standard Id */
|
||||
#define CAN_ID_EXT 0x00000004U /*!< Extended Id */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
|
||||
* @{
|
||||
*/
|
||||
#define CAN_RTR_DATA 0x00000000U /*!< Data frame */
|
||||
#define CAN_RTR_REMOTE 0x00000002U /*!< Remote frame */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
|
||||
#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_flags CAN Flags
|
||||
* @{
|
||||
*/
|
||||
/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
|
||||
and CAN_ClearFlag() functions. */
|
||||
/* If the flag is 0x1XXXXXXX, it means that it can only be used with
|
||||
CAN_GetFlagStatus() function. */
|
||||
|
||||
/* Transmit Flags */
|
||||
#define CAN_FLAG_RQCP0 0x00000500U /*!< Request MailBox0 flag */
|
||||
#define CAN_FLAG_RQCP1 0x00000508U /*!< Request MailBox1 flag */
|
||||
#define CAN_FLAG_RQCP2 0x00000510U /*!< Request MailBox2 flag */
|
||||
#define CAN_FLAG_TXOK0 0x00000501U /*!< Transmission OK MailBox0 flag */
|
||||
#define CAN_FLAG_TXOK1 0x00000509U /*!< Transmission OK MailBox1 flag */
|
||||
#define CAN_FLAG_TXOK2 0x00000511U /*!< Transmission OK MailBox2 flag */
|
||||
#define CAN_FLAG_TME0 0x0000051AU /*!< Transmit mailbox 0 empty flag */
|
||||
#define CAN_FLAG_TME1 0x0000051BU /*!< Transmit mailbox 0 empty flag */
|
||||
#define CAN_FLAG_TME2 0x0000051CU /*!< Transmit mailbox 0 empty flag */
|
||||
|
||||
/* Receive Flags */
|
||||
#define CAN_FLAG_FF0 0x00000203U /*!< FIFO 0 Full flag */
|
||||
#define CAN_FLAG_FOV0 0x00000204U /*!< FIFO 0 Overrun flag */
|
||||
|
||||
#define CAN_FLAG_FF1 0x00000403U /*!< FIFO 1 Full flag */
|
||||
#define CAN_FLAG_FOV1 0x00000404U /*!< FIFO 1 Overrun flag */
|
||||
|
||||
/* Operating Mode Flags */
|
||||
#define CAN_FLAG_INAK 0x00000100U /*!< Initialization acknowledge flag */
|
||||
#define CAN_FLAG_SLAK 0x00000101U /*!< Sleep acknowledge flag */
|
||||
#define CAN_FLAG_ERRI 0x00000102U /*!< Error flag */
|
||||
#define CAN_FLAG_WKU 0x00000103U /*!< Wake up flag */
|
||||
#define CAN_FLAG_SLAKI 0x00000104U /*!< Sleep acknowledge flag */
|
||||
|
||||
/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
|
||||
In this case the SLAK bit can be polled.*/
|
||||
|
||||
/* Error Flags */
|
||||
#define CAN_FLAG_EWG 0x00000300U /*!< Error warning flag */
|
||||
#define CAN_FLAG_EPV 0x00000301U /*!< Error passive flag */
|
||||
#define CAN_FLAG_BOF 0x00000302U /*!< Bus-Off flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Interrupts CAN Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define CAN_IT_TME CAN_IER_TMEIE /*!< Transmit mailbox empty interrupt */
|
||||
|
||||
/* Receive Interrupts */
|
||||
#define CAN_IT_FMP0 CAN_IER_FMPIE0 /*!< FIFO 0 message pending interrupt */
|
||||
#define CAN_IT_FF0 CAN_IER_FFIE0 /*!< FIFO 0 full interrupt */
|
||||
#define CAN_IT_FOV0 CAN_IER_FOVIE0 /*!< FIFO 0 overrun interrupt */
|
||||
#define CAN_IT_FMP1 CAN_IER_FMPIE1 /*!< FIFO 1 message pending interrupt */
|
||||
#define CAN_IT_FF1 CAN_IER_FFIE1 /*!< FIFO 1 full interrupt */
|
||||
#define CAN_IT_FOV1 CAN_IER_FOVIE1 /*!< FIFO 1 overrun interrupt */
|
||||
|
||||
/* Operating Mode Interrupts */
|
||||
#define CAN_IT_WKU CAN_IER_WKUIE /*!< Wake-up interrupt */
|
||||
#define CAN_IT_SLK CAN_IER_SLKIE /*!< Sleep acknowledge interrupt */
|
||||
|
||||
/* Error Interrupts */
|
||||
#define CAN_IT_EWG CAN_IER_EWGIE /*!< Error warning interrupt */
|
||||
#define CAN_IT_EPV CAN_IER_EPVIE /*!< Error passive interrupt */
|
||||
#define CAN_IT_BOF CAN_IER_BOFIE /*!< Bus-off interrupt */
|
||||
#define CAN_IT_LEC CAN_IER_LECIE /*!< Last error code interrupt */
|
||||
#define CAN_IT_ERR CAN_IER_ERRIE /*!< Error Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
|
||||
* @{
|
||||
*/
|
||||
#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
|
||||
#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
|
||||
#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Macros CAN Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CAN handle state
|
||||
* @param __HANDLE__ specifies the CAN Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Enable the specified CAN interrupts.
|
||||
* @param __HANDLE__ CAN handle
|
||||
* @param __INTERRUPT__ CAN Interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified CAN interrupts.
|
||||
* @param __HANDLE__ CAN handle
|
||||
* @param __INTERRUPT__ CAN Interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Return the number of pending received messages.
|
||||
* @param __HANDLE__ CAN handle
|
||||
* @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
|
||||
* @retval The number of pending message.
|
||||
*/
|
||||
#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
|
||||
((uint8_t)((__HANDLE__)->Instance->RF0R&0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&0x03U)))
|
||||
|
||||
/** @brief Check whether the specified CAN flag is set or not.
|
||||
* @param __HANDLE__ CAN Handle
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
|
||||
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
|
||||
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
|
||||
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
|
||||
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
|
||||
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
|
||||
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
|
||||
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
|
||||
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
|
||||
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
|
||||
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
|
||||
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
|
||||
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
|
||||
* @arg CAN_FLAG_WKU: Wake up Flag
|
||||
* @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
|
||||
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
|
||||
* @arg CAN_FLAG_EWG: Error Warning Flag
|
||||
* @arg CAN_FLAG_EPV: Error Passive Flag
|
||||
* @arg CAN_FLAG_BOF: Bus-Off Flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
|
||||
|
||||
/** @brief Clear the specified CAN pending flag.
|
||||
* @param __HANDLE__ CAN Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
|
||||
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
|
||||
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
|
||||
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
|
||||
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
|
||||
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
|
||||
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
|
||||
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
|
||||
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
|
||||
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
|
||||
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
|
||||
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
|
||||
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
|
||||
* @arg CAN_FLAG_WKU: Wake up Flag
|
||||
* @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
|
||||
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))))
|
||||
|
||||
/** @brief Check if the specified CAN interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ CAN Handle
|
||||
* @param __INTERRUPT__ specifies the CAN interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
|
||||
* @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
|
||||
* @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Check the transmission status of a CAN Frame.
|
||||
* @param __HANDLE__ CAN Handle
|
||||
* @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
|
||||
* @retval The new status of transmission (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
|
||||
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
|
||||
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
|
||||
((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
|
||||
|
||||
/**
|
||||
* @brief Release the specified receive FIFO.
|
||||
* @param __HANDLE__ CAN handle
|
||||
* @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
|
||||
((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
|
||||
|
||||
/**
|
||||
* @brief Cancel a transmit request.
|
||||
* @param __HANDLE__ CAN Handle
|
||||
* @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
|
||||
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
|
||||
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
|
||||
((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
|
||||
|
||||
/**
|
||||
* @brief Enable or disable the DBG Freeze for CAN.
|
||||
* @param __HANDLE__ CAN Handle
|
||||
* @param __NEWSTATE__ new state of the CAN peripheral.
|
||||
* This parameter can be: ENABLE (CAN reception/transmission is frozen
|
||||
* during debug. Reception FIFOs can still be accessed/controlled normally)
|
||||
* or DISABLE (CAN is working during debug).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
|
||||
((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CAN_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
|
||||
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
|
||||
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ***************************************************/
|
||||
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
|
||||
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Types CAN Private Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Variables CAN Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Constants CAN Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
|
||||
#define CAN_FLAG_MASK 0x000000FFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Macros CAN Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
|
||||
((MODE) == CAN_MODE_LOOPBACK)|| \
|
||||
((MODE) == CAN_MODE_SILENT) || \
|
||||
((MODE) == CAN_MODE_SILENT_LOOPBACK))
|
||||
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
|
||||
((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
|
||||
#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
|
||||
#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
|
||||
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
|
||||
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
|
||||
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
|
||||
((MODE) == CAN_FILTERMODE_IDLIST))
|
||||
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
|
||||
((SCALE) == CAN_FILTERSCALE_32BIT))
|
||||
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
|
||||
((FIFO) == CAN_FILTER_FIFO1))
|
||||
#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
|
||||
|
||||
#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
|
||||
#define IS_CAN_STDID(STDID) ((STDID) <= 0x7FFU)
|
||||
#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
|
||||
#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
|
||||
|
||||
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
|
||||
((IDTYPE) == CAN_ID_EXT))
|
||||
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
|
||||
#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Functions CAN Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_CAN_LEGACY_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,57 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32_assert.h
|
||||
* @author MCD Application Team
|
||||
* @brief STM32 assert template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32_assert.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32_ASSERT_H
|
||||
#define __STM32_ASSERT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32_ASSERT_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,247 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_H
|
||||
#define __STM32F2xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
/** @brief Main Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
|
||||
|
||||
/** @brief System Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
|
||||
}while(0);
|
||||
|
||||
/** @brief Embedded SRAM mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported variables ---------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern __IO uint32_t uwTick;
|
||||
extern uint32_t uwTickPrio;
|
||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(__IO uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,891 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_adc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of ADC HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_ADC_H
|
||||
#define __STM32F2xx_ADC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup ADC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup ADC_Exported_Types ADC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Structure definition of ADC and regular group initialization
|
||||
* @note Parameters of this structure are shared within 2 scopes:
|
||||
* - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank.
|
||||
* - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
|
||||
* @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
|
||||
* ADC state can be either:
|
||||
* - For all parameters: ADC disabled
|
||||
* - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
|
||||
* - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
|
||||
* If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
|
||||
* without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t ClockPrescaler; /*!< Select ADC clock prescaler. The clock is common for
|
||||
all the ADCs.
|
||||
This parameter can be a value of @ref ADC_ClockPrescaler */
|
||||
uint32_t Resolution; /*!< Configures the ADC resolution.
|
||||
This parameter can be a value of @ref ADC_Resolution */
|
||||
uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
|
||||
or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
|
||||
This parameter can be a value of @ref ADC_Data_align */
|
||||
uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
|
||||
This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
|
||||
If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
|
||||
Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
|
||||
If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
|
||||
Scan direction is upward: from rank1 to rank 'n'.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
|
||||
This parameter can be a value of @ref ADC_EOCSelection.
|
||||
Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
|
||||
Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
|
||||
or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
|
||||
Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
|
||||
If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
|
||||
FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
|
||||
after the selected trigger occurred (software start or external trigger).
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
|
||||
To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
|
||||
FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
|
||||
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
|
||||
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
|
||||
If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
|
||||
uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
|
||||
If set to ADC_SOFTWARE_START, external triggers are disabled.
|
||||
If set to external trigger source, triggering is on event rising edge by default.
|
||||
This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
|
||||
uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
|
||||
If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
|
||||
This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
|
||||
FunctionalState DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
|
||||
or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
|
||||
Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
|
||||
Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
}ADC_InitTypeDef;
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @brief Structure definition of ADC channel for regular group
|
||||
* @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
|
||||
* ADC can be either disabled or enabled without conversion on going on regular group.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
|
||||
This parameter can be a value of @ref ADC_channels */
|
||||
uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
|
||||
uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
|
||||
Unit: ADC clock cycles
|
||||
Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
|
||||
This parameter can be a value of @ref ADC_sampling_times
|
||||
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
|
||||
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
|
||||
Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
|
||||
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
|
||||
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
|
||||
uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
|
||||
}ADC_ChannelConfTypeDef;
|
||||
|
||||
/**
|
||||
* @brief ADC Configuration multi-mode structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
|
||||
This parameter can be a value of @ref ADC_analog_watchdog_selection */
|
||||
uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
|
||||
This parameter must be a 12-bit value. */
|
||||
uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
|
||||
This parameter must be a 12-bit value. */
|
||||
uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
|
||||
This parameter has an effect only if watchdog mode is configured on single channel
|
||||
This parameter can be a value of @ref ADC_channels */
|
||||
FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured
|
||||
is interrupt mode or in polling mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
|
||||
}ADC_AnalogWDGConfTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL ADC state machine: ADC states definition (bitfields)
|
||||
*/
|
||||
/* States of ADC global scope */
|
||||
#define HAL_ADC_STATE_RESET 0x00000000U /*!< ADC not yet initialized or disabled */
|
||||
#define HAL_ADC_STATE_READY 0x00000001U /*!< ADC peripheral ready for use */
|
||||
#define HAL_ADC_STATE_BUSY_INTERNAL 0x00000002U /*!< ADC is busy to internal process (initialization, calibration) */
|
||||
#define HAL_ADC_STATE_TIMEOUT 0x00000004U /*!< TimeOut occurrence */
|
||||
|
||||
/* States of ADC errors */
|
||||
#define HAL_ADC_STATE_ERROR_INTERNAL 0x00000010U /*!< Internal error occurrence */
|
||||
#define HAL_ADC_STATE_ERROR_CONFIG 0x00000020U /*!< Configuration error occurrence */
|
||||
#define HAL_ADC_STATE_ERROR_DMA 0x00000040U /*!< DMA error occurrence */
|
||||
|
||||
/* States of ADC group regular */
|
||||
#define HAL_ADC_STATE_REG_BUSY 0x00000100U /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
|
||||
external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
|
||||
#define HAL_ADC_STATE_REG_EOC 0x00000200U /*!< Conversion data available on group regular */
|
||||
#define HAL_ADC_STATE_REG_OVR 0x00000400U /*!< Overrun occurrence */
|
||||
|
||||
/* States of ADC group injected */
|
||||
#define HAL_ADC_STATE_INJ_BUSY 0x00001000U /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
|
||||
external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
|
||||
#define HAL_ADC_STATE_INJ_EOC 0x00002000U /*!< Conversion data available on group injected */
|
||||
|
||||
/* States of ADC analog watchdogs */
|
||||
#define HAL_ADC_STATE_AWD1 0x00010000U /*!< Out-of-window occurrence of analog watchdog 1 */
|
||||
|
||||
/**
|
||||
* @brief ADC handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __ADC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif
|
||||
{
|
||||
ADC_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
ADC_InitTypeDef Init; /*!< ADC required parameters */
|
||||
|
||||
__IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
|
||||
|
||||
DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< ADC locking object */
|
||||
|
||||
__IO uint32_t State; /*!< ADC communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< ADC Error code */
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */
|
||||
void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */
|
||||
void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */
|
||||
void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */
|
||||
void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected conversion complete callback */
|
||||
void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */
|
||||
#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
|
||||
}ADC_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL ADC Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */
|
||||
HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */
|
||||
HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */
|
||||
HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */
|
||||
HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */
|
||||
HAL_ADC_MSPINIT_CB_ID = 0x05U, /*!< ADC Msp Init callback ID */
|
||||
HAL_ADC_MSPDEINIT_CB_ID = 0x06U /*!< ADC Msp DeInit callback ID */
|
||||
} HAL_ADC_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL ADC Callback pointer definition
|
||||
*/
|
||||
typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */
|
||||
|
||||
#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup ADC_Exported_Constants ADC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_Error_Code ADC Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_ADC_ERROR_NONE 0x00U /*!< No error */
|
||||
#define HAL_ADC_ERROR_INTERNAL 0x01U /*!< ADC IP internal error: if problem of clocking,
|
||||
enable/disable, erroneous state */
|
||||
#define HAL_ADC_ERROR_OVR 0x02U /*!< Overrun error */
|
||||
#define HAL_ADC_ERROR_DMA 0x04U /*!< DMA transfer error */
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define ADC_CLOCK_SYNC_PCLK_DIV2 0x00000000U
|
||||
#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
|
||||
#define ADC_CLOCK_SYNC_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
|
||||
#define ADC_CLOCK_SYNC_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
|
||||
* @{
|
||||
*/
|
||||
#define ADC_TWOSAMPLINGDELAY_5CYCLES 0x00000000U
|
||||
#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
|
||||
#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
|
||||
#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
|
||||
#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
|
||||
#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
|
||||
#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
|
||||
#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
|
||||
#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
|
||||
#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
|
||||
#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_Resolution ADC Resolution
|
||||
* @{
|
||||
*/
|
||||
#define ADC_RESOLUTION_12B 0x00000000U
|
||||
#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0)
|
||||
#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1)
|
||||
#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
|
||||
* @{
|
||||
*/
|
||||
#define ADC_EXTERNALTRIGCONVEDGE_NONE 0x00000000U
|
||||
#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
|
||||
#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
|
||||
#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
|
||||
* @{
|
||||
*/
|
||||
/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
|
||||
/* compatibility with other STM32 devices. */
|
||||
#define ADC_EXTERNALTRIGCONV_T1_CC1 0x00000000U
|
||||
#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
|
||||
#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
|
||||
#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
|
||||
#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
|
||||
#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
|
||||
#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
|
||||
#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_Data_align ADC Data Align
|
||||
* @{
|
||||
*/
|
||||
#define ADC_DATAALIGN_RIGHT 0x00000000U
|
||||
#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_channels ADC Common Channels
|
||||
* @{
|
||||
*/
|
||||
#define ADC_CHANNEL_0 0x00000000U
|
||||
#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
|
||||
#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
|
||||
#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
|
||||
#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
|
||||
#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
|
||||
#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
|
||||
#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
|
||||
#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
|
||||
#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
|
||||
#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
|
||||
#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
|
||||
|
||||
#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
|
||||
#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_sampling_times ADC Sampling Times
|
||||
* @{
|
||||
*/
|
||||
#define ADC_SAMPLETIME_3CYCLES 0x00000000U
|
||||
#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
|
||||
#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
|
||||
#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
|
||||
#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
|
||||
#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
|
||||
#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
|
||||
#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_EOCSelection ADC EOC Selection
|
||||
* @{
|
||||
*/
|
||||
#define ADC_EOC_SEQ_CONV 0x00000000U
|
||||
#define ADC_EOC_SINGLE_CONV 0x00000001U
|
||||
#define ADC_EOC_SINGLE_SEQ_CONV 0x00000002U /*!< reserved for future use */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_Event_type ADC Event Type
|
||||
* @{
|
||||
*/
|
||||
#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
|
||||
#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
|
||||
* @{
|
||||
*/
|
||||
#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
|
||||
#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
|
||||
#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
|
||||
#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
|
||||
#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
|
||||
#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
|
||||
#define ADC_ANALOGWATCHDOG_NONE 0x00000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
|
||||
* @{
|
||||
*/
|
||||
#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
|
||||
#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
|
||||
#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
|
||||
#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_flags_definition ADC Flags Definition
|
||||
* @{
|
||||
*/
|
||||
#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
|
||||
#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
|
||||
#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
|
||||
#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
|
||||
#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
|
||||
#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADC_channels_type ADC Channels Type
|
||||
* @{
|
||||
*/
|
||||
#define ADC_ALL_CHANNELS 0x00000001U
|
||||
#define ADC_REGULAR_CHANNELS 0x00000002U /*!< reserved for future use */
|
||||
#define ADC_INJECTED_CHANNELS 0x00000003U /*!< reserved for future use */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup ADC_Exported_Macros ADC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset ADC handle state
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->State = HAL_ADC_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
|
||||
((__HANDLE__)->State = HAL_ADC_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enable the ADC peripheral.
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
|
||||
|
||||
/**
|
||||
* @brief Disable the ADC peripheral.
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
|
||||
|
||||
/**
|
||||
* @brief Enable the ADC end of conversion interrupt.
|
||||
* @param __HANDLE__ specifies the ADC Handle.
|
||||
* @param __INTERRUPT__ ADC Interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the ADC end of conversion interrupt.
|
||||
* @param __HANDLE__ specifies the ADC Handle.
|
||||
* @param __INTERRUPT__ ADC interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
|
||||
|
||||
/** @brief Check if the specified ADC interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ specifies the ADC Handle.
|
||||
* @param __INTERRUPT__ specifies the ADC interrupt source to check.
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the ADC's pending flags.
|
||||
* @param __HANDLE__ specifies the ADC Handle.
|
||||
* @param __FLAG__ ADC flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Get the selected ADC's flag status.
|
||||
* @param __HANDLE__ specifies the ADC Handle.
|
||||
* @param __FLAG__ ADC flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include ADC HAL Extension module */
|
||||
#include "stm32f2xx_hal_adc_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup ADC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup ADC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
|
||||
|
||||
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup ADC_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
|
||||
|
||||
HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
|
||||
|
||||
HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
|
||||
|
||||
void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
|
||||
|
||||
HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
|
||||
HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
|
||||
|
||||
uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
|
||||
|
||||
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
|
||||
void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
|
||||
void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
|
||||
void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup ADC_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions *************************************************/
|
||||
HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
|
||||
HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup ADC_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ***************************************************/
|
||||
uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
|
||||
uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup ADC_Private_Constants ADC Private Constants
|
||||
* @{
|
||||
*/
|
||||
/* Delay for ADC stabilization time. */
|
||||
/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
|
||||
/* Unit: us */
|
||||
#define ADC_STAB_DELAY_US 3U
|
||||
/* Delay for temperature sensor stabilization time. */
|
||||
/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
|
||||
/* Unit: us */
|
||||
#define ADC_TEMPSENSOR_DELAY_US 10U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup ADC_Private_Macros ADC Private Macros
|
||||
* @{
|
||||
*/
|
||||
/* Macro reserved for internal HAL driver usage, not intended to be used in
|
||||
code of final user */
|
||||
|
||||
/**
|
||||
* @brief Verification of ADC state: enabled or disabled
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval SET (ADC enabled) or RESET (ADC disabled)
|
||||
*/
|
||||
#define ADC_IS_ENABLE(__HANDLE__) \
|
||||
((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \
|
||||
) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Test if conversion trigger of regular group is software start
|
||||
* or external trigger.
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval SET (software start) or RESET (external trigger)
|
||||
*/
|
||||
#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
|
||||
(((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
|
||||
|
||||
/**
|
||||
* @brief Test if conversion trigger of injected group is software start
|
||||
* or external trigger.
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval SET (software start) or RESET (external trigger)
|
||||
*/
|
||||
#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
|
||||
(((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET)
|
||||
|
||||
/**
|
||||
* @brief Simultaneously clears and sets specific bits of the handle State
|
||||
* @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
|
||||
* the first parameter is the ADC handle State, the second parameter is the
|
||||
* bit field to clear, the third and last parameter is the bit field to set.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_STATE_CLR_SET MODIFY_REG
|
||||
|
||||
/**
|
||||
* @brief Clear ADC error code (set it to error code: "no error")
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
|
||||
((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
|
||||
|
||||
|
||||
#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
|
||||
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
|
||||
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV6) || \
|
||||
((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV8))
|
||||
#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
|
||||
((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
|
||||
#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
|
||||
((RESOLUTION) == ADC_RESOLUTION_10B) || \
|
||||
((RESOLUTION) == ADC_RESOLUTION_8B) || \
|
||||
((RESOLUTION) == ADC_RESOLUTION_6B))
|
||||
#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
|
||||
#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
|
||||
((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \
|
||||
((REGTRIG) == ADC_SOFTWARE_START))
|
||||
#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
|
||||
((ALIGN) == ADC_DATAALIGN_LEFT))
|
||||
#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_15CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_28CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_56CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_84CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_112CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_144CYCLES) || \
|
||||
((TIME) == ADC_SAMPLETIME_480CYCLES))
|
||||
#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \
|
||||
((EOCSelection) == ADC_EOC_SEQ_CONV) || \
|
||||
((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV))
|
||||
#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
|
||||
((EVENT) == ADC_OVR_EVENT))
|
||||
#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
|
||||
((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
|
||||
#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
|
||||
((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
|
||||
((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
|
||||
#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFFU)
|
||||
|
||||
#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U))
|
||||
#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= (16U)))
|
||||
#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U))
|
||||
#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
|
||||
((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= 0x0FFFU)) || \
|
||||
(((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= 0x03FFU)) || \
|
||||
(((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= 0x00FFU)) || \
|
||||
(((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= 0x003FU)))
|
||||
|
||||
/**
|
||||
* @brief Set ADC Regular channel sequence length.
|
||||
* @param _NbrOfConversion_ Regular channel sequence length.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20U)
|
||||
|
||||
/**
|
||||
* @brief Set the ADC's sample time for channel numbers between 10 and 18.
|
||||
* @param _SAMPLETIME_ Sample time parameter.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10U)))
|
||||
|
||||
/**
|
||||
* @brief Set the ADC's sample time for channel numbers between 0 and 9.
|
||||
* @param _SAMPLETIME_ Sample time parameter.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3U * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
|
||||
|
||||
/**
|
||||
* @brief Set the selected regular channel rank for rank between 1 and 6.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @param _RANKNB_ Rank number.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 1U)))
|
||||
|
||||
/**
|
||||
* @brief Set the selected regular channel rank for rank between 7 and 12.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @param _RANKNB_ Rank number.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 7U)))
|
||||
|
||||
/**
|
||||
* @brief Set the selected regular channel rank for rank between 13 and 16.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @param _RANKNB_ Rank number.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * ((_RANKNB_) - 13U)))
|
||||
|
||||
/**
|
||||
* @brief Enable ADC continuous conversion mode.
|
||||
* @param _CONTINUOUS_MODE_ Continuous mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1U)
|
||||
|
||||
/**
|
||||
* @brief Configures the number of discontinuous conversions for the regular group channels.
|
||||
* @param _NBR_DISCONTINUOUSCONV_ Number of discontinuous conversions.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1U) << POSITION_VAL(ADC_CR1_DISCNUM))
|
||||
|
||||
/**
|
||||
* @brief Enable ADC scan mode.
|
||||
* @param _SCANCONV_MODE_ Scan conversion mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8U)
|
||||
|
||||
/**
|
||||
* @brief Enable the ADC end of conversion selection.
|
||||
* @param _EOCSelection_MODE_ End of conversion selection mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10U)
|
||||
|
||||
/**
|
||||
* @brief Enable the ADC DMA continuous request.
|
||||
* @param _DMAContReq_MODE_ DMA continuous request mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9U)
|
||||
|
||||
/**
|
||||
* @brief Return resolution bits in CR1 register.
|
||||
* @param __HANDLE__ ADC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup ADC_Private_Functions ADC Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__STM32F2xx_ADC_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,360 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_adc_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of ADC HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_ADC_EX_H
|
||||
#define __STM32F2xx_ADC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup ADCEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Exported_Types ADC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief ADC Configuration injected Channel structure definition
|
||||
* @note Parameters of this structure are shared within 2 scopes:
|
||||
* - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
|
||||
* - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
|
||||
* AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
|
||||
* @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
|
||||
* ADC state can be either:
|
||||
* - For all parameters: ADC disabled
|
||||
* - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
|
||||
* - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
|
||||
This parameter can be a value of @ref ADC_channels
|
||||
Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
|
||||
uint32_t InjectedRank; /*!< Rank in the injected group sequencer
|
||||
This parameter must be a value of @ref ADCEx_injected_rank
|
||||
Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
|
||||
uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
|
||||
Unit: ADC clock cycles
|
||||
Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
|
||||
This parameter can be a value of @ref ADC_sampling_times
|
||||
Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
|
||||
If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
|
||||
Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
|
||||
sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
|
||||
Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
|
||||
uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
|
||||
Offset value must be a positive number.
|
||||
Depending of ADC resolution selected (12, 10, 8 or 6 bits),
|
||||
this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
|
||||
uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
|
||||
To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 4.
|
||||
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||||
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||||
FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
|
||||
Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
|
||||
Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
|
||||
This parameter can be set to ENABLE or DISABLE.
|
||||
Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
|
||||
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||||
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||||
FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
|
||||
This parameter can be set to ENABLE or DISABLE.
|
||||
Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
|
||||
Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
|
||||
Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
|
||||
To maintain JAUTO always enabled, DMA must be configured in circular mode.
|
||||
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||||
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||||
uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
|
||||
If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
|
||||
If set to external trigger source, triggering is on event rising edge.
|
||||
This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
|
||||
Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
|
||||
If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
|
||||
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||||
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||||
uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
|
||||
This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
|
||||
If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
|
||||
Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
|
||||
configure a channel on injected group can impact the configuration of other channels previously set. */
|
||||
}ADC_InjectionConfTypeDef;
|
||||
|
||||
/**
|
||||
* @brief ADC Configuration multi-mode structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
|
||||
This parameter can be a value of @ref ADCEx_Common_mode */
|
||||
uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
|
||||
This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
|
||||
uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
|
||||
This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
|
||||
}ADC_MultiModeTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_Common_mode ADC Common Mode
|
||||
* @{
|
||||
*/
|
||||
#define ADC_MODE_INDEPENDENT 0x00000000U
|
||||
#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
|
||||
#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
|
||||
#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
|
||||
#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
|
||||
#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
|
||||
#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
|
||||
#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
|
||||
#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
|
||||
#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
|
||||
#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
|
||||
#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
|
||||
#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
|
||||
* @{
|
||||
*/
|
||||
#define ADC_DMAACCESSMODE_DISABLED 0x00000000U /*!< DMA mode disabled */
|
||||
#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
|
||||
#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
|
||||
#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
|
||||
* @{
|
||||
*/
|
||||
#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE 0x00000000U
|
||||
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
|
||||
#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
|
||||
#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
|
||||
* @{
|
||||
*/
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 0x00000000U
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
|
||||
#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
|
||||
#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_injected_rank ADC Injected Rank
|
||||
* @{
|
||||
*/
|
||||
#define ADC_INJECTED_RANK_1 0x00000001U
|
||||
#define ADC_INJECTED_RANK_2 0x00000002U
|
||||
#define ADC_INJECTED_RANK_3 0x00000003U
|
||||
#define ADC_INJECTED_RANK_4 0x00000004U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_channels ADC Specific Channels
|
||||
* @{
|
||||
*/
|
||||
#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup ADC_Exported_Macros ADC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup ADCEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup ADCEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* I/O operation functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
|
||||
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
|
||||
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
|
||||
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
|
||||
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
|
||||
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
|
||||
|
||||
/* Peripheral Control functions *************************************************/
|
||||
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
|
||||
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Private_Constants ADC Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Private_Macros ADC Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
|
||||
|
||||
#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
|
||||
((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
|
||||
((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
|
||||
((MODE) == ADC_DUALMODE_INJECSIMULT) || \
|
||||
((MODE) == ADC_DUALMODE_REGSIMULT) || \
|
||||
((MODE) == ADC_DUALMODE_INTERL) || \
|
||||
((MODE) == ADC_DUALMODE_ALTERTRIG) || \
|
||||
((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
|
||||
((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
|
||||
((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
|
||||
((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
|
||||
((MODE) == ADC_TRIPLEMODE_INTERL) || \
|
||||
((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
|
||||
#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
|
||||
((MODE) == ADC_DMAACCESSMODE_1) || \
|
||||
((MODE) == ADC_DMAACCESSMODE_2) || \
|
||||
((MODE) == ADC_DMAACCESSMODE_3))
|
||||
#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
|
||||
((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
|
||||
#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
|
||||
((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \
|
||||
((INJTRIG) == ADC_INJECTED_SOFTWARE_START))
|
||||
#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1U)) && ((LENGTH) <= ((uint32_t)4U)))
|
||||
#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1U)) && ((RANK) <= ((uint32_t)4U)))
|
||||
|
||||
/**
|
||||
* @brief Set the selected injected Channel rank.
|
||||
* @param _CHANNELNB_ Channel number.
|
||||
* @param _RANKNB_ Rank number.
|
||||
* @param _JSQR_JL_ Sequence length.
|
||||
* @retval None
|
||||
*/
|
||||
#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_))))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Private_Functions ADC Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__STM32F2xx_ADC_EX_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,848 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_can.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CAN HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_CAN_H
|
||||
#define STM32F2xx_HAL_CAN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (CAN1)
|
||||
/** @addtogroup CAN
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Types CAN Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
|
||||
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
|
||||
HAL_CAN_STATE_LISTENING = 0x02U, /*!< CAN receive process is ongoing */
|
||||
HAL_CAN_STATE_SLEEP_PENDING = 0x03U, /*!< CAN sleep request is pending */
|
||||
HAL_CAN_STATE_SLEEP_ACTIVE = 0x04U, /*!< CAN sleep mode is active */
|
||||
HAL_CAN_STATE_ERROR = 0x05U /*!< CAN error state */
|
||||
|
||||
} HAL_CAN_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Specifies the length of a time quantum.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the CAN operating mode.
|
||||
This parameter can be a value of @ref CAN_operating_mode */
|
||||
|
||||
uint32_t SyncJumpWidth; /*!< Specifies the maximum number of time quanta the CAN hardware
|
||||
is allowed to lengthen or shorten a bit to perform resynchronization.
|
||||
This parameter can be a value of @ref CAN_synchronisation_jump_width */
|
||||
|
||||
uint32_t TimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
|
||||
|
||||
uint32_t TimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
|
||||
|
||||
FunctionalState TimeTriggeredMode; /*!< Enable or disable the time triggered communication mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
FunctionalState AutoBusOff; /*!< Enable or disable the automatic bus-off management.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
FunctionalState AutoWakeUp; /*!< Enable or disable the automatic wake-up mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
FunctionalState AutoRetransmission; /*!< Enable or disable the non-automatic retransmission mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
FunctionalState ReceiveFifoLocked; /*!< Enable or disable the Receive FIFO Locked mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
} CAN_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN filter configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
|
||||
configuration, first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
|
||||
configuration, second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (MSBs for a 32-bit configuration,
|
||||
first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (LSBs for a 32-bit configuration,
|
||||
second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
|
||||
This parameter can be a value of @ref CAN_filter_FIFO */
|
||||
|
||||
uint32_t FilterBank; /*!< Specifies the filter bank which will be initialized.
|
||||
For single CAN instance(14 dedicated filter banks),
|
||||
this parameter must be a number between Min_Data = 0 and Max_Data = 13.
|
||||
For dual CAN instances(28 filter banks shared),
|
||||
this parameter must be a number between Min_Data = 0 and Max_Data = 27. */
|
||||
|
||||
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
|
||||
This parameter can be a value of @ref CAN_filter_mode */
|
||||
|
||||
uint32_t FilterScale; /*!< Specifies the filter scale.
|
||||
This parameter can be a value of @ref CAN_filter_scale */
|
||||
|
||||
uint32_t FilterActivation; /*!< Enable or disable the filter.
|
||||
This parameter can be a value of @ref CAN_filter_activation */
|
||||
|
||||
uint32_t SlaveStartFilterBank; /*!< Select the start filter bank for the slave CAN instance.
|
||||
For single CAN instances, this parameter is meaningless.
|
||||
For dual CAN instances, all filter banks with lower index are assigned to master
|
||||
CAN instance, whereas all filter banks with greater index are assigned to slave
|
||||
CAN instance.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
|
||||
|
||||
} CAN_FilterTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Tx message header structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_identifier_type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
|
||||
|
||||
FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
|
||||
of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
|
||||
@note: Time Triggered Communication Mode must be enabled.
|
||||
@note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
} CAN_TxHeaderTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Rx message header structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_identifier_type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
|
||||
|
||||
uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
|
||||
@note: Time Triggered Communication Mode must be enabled.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
|
||||
|
||||
} CAN_RxHeaderTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN handle Structure definition
|
||||
*/
|
||||
typedef struct __CAN_HandleTypeDef
|
||||
{
|
||||
CAN_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
CAN_InitTypeDef Init; /*!< CAN required parameters */
|
||||
|
||||
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< CAN Error code.
|
||||
This parameter can be a value of @ref CAN_Error_Code */
|
||||
|
||||
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
|
||||
void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback */
|
||||
void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback */
|
||||
void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback */
|
||||
void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 0 abort callback */
|
||||
void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 1 abort callback */
|
||||
void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 2 abort callback */
|
||||
void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback */
|
||||
void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 full callback */
|
||||
void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback */
|
||||
void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 full callback */
|
||||
void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Sleep callback */
|
||||
void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Wake Up from Rx msg callback */
|
||||
void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Error callback */
|
||||
|
||||
void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp DeInit callback */
|
||||
|
||||
#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
|
||||
} CAN_HandleTypeDef;
|
||||
|
||||
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
|
||||
/**
|
||||
* @brief HAL CAN common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID = 0x00U, /*!< CAN Tx Mailbox 0 complete callback ID */
|
||||
HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID = 0x01U, /*!< CAN Tx Mailbox 1 complete callback ID */
|
||||
HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID = 0x02U, /*!< CAN Tx Mailbox 2 complete callback ID */
|
||||
HAL_CAN_TX_MAILBOX0_ABORT_CB_ID = 0x03U, /*!< CAN Tx Mailbox 0 abort callback ID */
|
||||
HAL_CAN_TX_MAILBOX1_ABORT_CB_ID = 0x04U, /*!< CAN Tx Mailbox 1 abort callback ID */
|
||||
HAL_CAN_TX_MAILBOX2_ABORT_CB_ID = 0x05U, /*!< CAN Tx Mailbox 2 abort callback ID */
|
||||
HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID = 0x06U, /*!< CAN Rx FIFO 0 message pending callback ID */
|
||||
HAL_CAN_RX_FIFO0_FULL_CB_ID = 0x07U, /*!< CAN Rx FIFO 0 full callback ID */
|
||||
HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID = 0x08U, /*!< CAN Rx FIFO 1 message pending callback ID */
|
||||
HAL_CAN_RX_FIFO1_FULL_CB_ID = 0x09U, /*!< CAN Rx FIFO 1 full callback ID */
|
||||
HAL_CAN_SLEEP_CB_ID = 0x0AU, /*!< CAN Sleep callback ID */
|
||||
HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID = 0x0BU, /*!< CAN Wake Up from Rx msg callback ID */
|
||||
HAL_CAN_ERROR_CB_ID = 0x0CU, /*!< CAN Error callback ID */
|
||||
|
||||
HAL_CAN_MSPINIT_CB_ID = 0x0DU, /*!< CAN MspInit callback ID */
|
||||
HAL_CAN_MSPDEINIT_CB_ID = 0x0EU, /*!< CAN MspDeInit callback ID */
|
||||
|
||||
} HAL_CAN_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL CAN Callback pointer definition
|
||||
*/
|
||||
typedef void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function */
|
||||
|
||||
#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CAN_Exported_Constants CAN Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Error_Code CAN Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< Protocol Error Warning */
|
||||
#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< Error Passive */
|
||||
#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< Bus-off error */
|
||||
#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */
|
||||
#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */
|
||||
#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */
|
||||
#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive error */
|
||||
#define HAL_CAN_ERROR_BD (0x00000080U) /*!< Bit dominant error */
|
||||
#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< CRC error */
|
||||
#define HAL_CAN_ERROR_RX_FOV0 (0x00000200U) /*!< Rx FIFO0 overrun error */
|
||||
#define HAL_CAN_ERROR_RX_FOV1 (0x00000400U) /*!< Rx FIFO1 overrun error */
|
||||
#define HAL_CAN_ERROR_TX_ALST0 (0x00000800U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
|
||||
#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 0 transmit failure due to transmit error */
|
||||
#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 1 transmit failure due to arbitration lost */
|
||||
#define HAL_CAN_ERROR_TX_TERR1 (0x00004000U) /*!< TxMailbox 1 transmit failure due to transmit error */
|
||||
#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 2 transmit failure due to arbitration lost */
|
||||
#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 2 transmit failure due to transmit error */
|
||||
#define HAL_CAN_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */
|
||||
#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U) /*!< Peripheral not initialized */
|
||||
#define HAL_CAN_ERROR_NOT_READY (0x00080000U) /*!< Peripheral not ready */
|
||||
#define HAL_CAN_ERROR_NOT_STARTED (0x00100000U) /*!< Peripheral not started */
|
||||
#define HAL_CAN_ERROR_PARAM (0x00200000U) /*!< Parameter error */
|
||||
|
||||
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
|
||||
#define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
|
||||
#define HAL_CAN_ERROR_INTERNAL (0x00800000U) /*!< Internal error */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_InitStatus CAN InitStatus
|
||||
* @{
|
||||
*/
|
||||
#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */
|
||||
#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_operating_mode CAN Operating Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */
|
||||
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
|
||||
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
|
||||
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
|
||||
* @{
|
||||
*/
|
||||
#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */
|
||||
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
|
||||
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
|
||||
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */
|
||||
#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
|
||||
#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
|
||||
#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
|
||||
#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
|
||||
#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
|
||||
#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
|
||||
#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
|
||||
#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
|
||||
#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
|
||||
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
|
||||
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
|
||||
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */
|
||||
#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
|
||||
#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
|
||||
#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
|
||||
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_mode CAN Filter Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERMODE_IDMASK (0x00000000U) /*!< Identifier mask mode */
|
||||
#define CAN_FILTERMODE_IDLIST (0x00000001U) /*!< Identifier list mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_scale CAN Filter Scale
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERSCALE_16BIT (0x00000000U) /*!< Two 16-bit filters */
|
||||
#define CAN_FILTERSCALE_32BIT (0x00000001U) /*!< One 32-bit filter */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_activation CAN Filter Activation
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTER_DISABLE (0x00000000U) /*!< Disable filter */
|
||||
#define CAN_FILTER_ENABLE (0x00000001U) /*!< Enable filter */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_FIFO CAN Filter FIFO
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTER_FIFO0 (0x00000000U) /*!< Filter FIFO 0 assignment for filter x */
|
||||
#define CAN_FILTER_FIFO1 (0x00000001U) /*!< Filter FIFO 1 assignment for filter x */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_identifier_type CAN Identifier Type
|
||||
* @{
|
||||
*/
|
||||
#define CAN_ID_STD (0x00000000U) /*!< Standard Id */
|
||||
#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
|
||||
* @{
|
||||
*/
|
||||
#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */
|
||||
#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
|
||||
* @{
|
||||
*/
|
||||
#define CAN_RX_FIFO0 (0x00000000U) /*!< CAN receive FIFO 0 */
|
||||
#define CAN_RX_FIFO1 (0x00000001U) /*!< CAN receive FIFO 1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
|
||||
* @{
|
||||
*/
|
||||
#define CAN_TX_MAILBOX0 (0x00000001U) /*!< Tx Mailbox 0 */
|
||||
#define CAN_TX_MAILBOX1 (0x00000002U) /*!< Tx Mailbox 1 */
|
||||
#define CAN_TX_MAILBOX2 (0x00000004U) /*!< Tx Mailbox 2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_flags CAN Flags
|
||||
* @{
|
||||
*/
|
||||
/* Transmit Flags */
|
||||
#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request complete MailBox 0 flag */
|
||||
#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox 0 flag */
|
||||
#define CAN_FLAG_ALST0 (0x00000502U) /*!< Arbitration Lost MailBox 0 flag */
|
||||
#define CAN_FLAG_TERR0 (0x00000503U) /*!< Transmission error MailBox 0 flag */
|
||||
#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request complete MailBox1 flag */
|
||||
#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox 1 flag */
|
||||
#define CAN_FLAG_ALST1 (0x0000050AU) /*!< Arbitration Lost MailBox 1 flag */
|
||||
#define CAN_FLAG_TERR1 (0x0000050BU) /*!< Transmission error MailBox 1 flag */
|
||||
#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request complete MailBox2 flag */
|
||||
#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox 2 flag */
|
||||
#define CAN_FLAG_ALST2 (0x00000512U) /*!< Arbitration Lost MailBox 2 flag */
|
||||
#define CAN_FLAG_TERR2 (0x00000513U) /*!< Transmission error MailBox 2 flag */
|
||||
#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */
|
||||
#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 1 empty flag */
|
||||
#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 2 empty flag */
|
||||
#define CAN_FLAG_LOW0 (0x0000051DU) /*!< Lowest priority mailbox 0 flag */
|
||||
#define CAN_FLAG_LOW1 (0x0000051EU) /*!< Lowest priority mailbox 1 flag */
|
||||
#define CAN_FLAG_LOW2 (0x0000051FU) /*!< Lowest priority mailbox 2 flag */
|
||||
|
||||
/* Receive Flags */
|
||||
#define CAN_FLAG_FF0 (0x00000203U) /*!< RX FIFO 0 Full flag */
|
||||
#define CAN_FLAG_FOV0 (0x00000204U) /*!< RX FIFO 0 Overrun flag */
|
||||
#define CAN_FLAG_FF1 (0x00000403U) /*!< RX FIFO 1 Full flag */
|
||||
#define CAN_FLAG_FOV1 (0x00000404U) /*!< RX FIFO 1 Overrun flag */
|
||||
|
||||
/* Operating Mode Flags */
|
||||
#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */
|
||||
#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */
|
||||
#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */
|
||||
#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up interrupt flag */
|
||||
#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge interrupt flag */
|
||||
|
||||
/* Error Flags */
|
||||
#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */
|
||||
#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */
|
||||
#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup CAN_Interrupts CAN Interrupts
|
||||
* @{
|
||||
*/
|
||||
/* Transmit Interrupt */
|
||||
#define CAN_IT_TX_MAILBOX_EMPTY ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
|
||||
|
||||
/* Receive Interrupts */
|
||||
#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
|
||||
#define CAN_IT_RX_FIFO0_FULL ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
|
||||
#define CAN_IT_RX_FIFO0_OVERRUN ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
|
||||
#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
|
||||
#define CAN_IT_RX_FIFO1_FULL ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
|
||||
#define CAN_IT_RX_FIFO1_OVERRUN ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
|
||||
|
||||
/* Operating Mode Interrupts */
|
||||
#define CAN_IT_WAKEUP ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
|
||||
#define CAN_IT_SLEEP_ACK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
|
||||
|
||||
/* Error Interrupts */
|
||||
#define CAN_IT_ERROR_WARNING ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
|
||||
#define CAN_IT_ERROR_PASSIVE ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
|
||||
#define CAN_IT_BUSOFF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
|
||||
#define CAN_IT_LAST_ERROR_CODE ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
|
||||
#define CAN_IT_ERROR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Macros CAN Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CAN handle state
|
||||
* @param __HANDLE__ CAN handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
|
||||
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_CAN_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
|
||||
#endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enable the specified CAN interrupts.
|
||||
* @param __HANDLE__ CAN handle.
|
||||
* @param __INTERRUPT__ CAN Interrupt sources to enable.
|
||||
* This parameter can be any combination of @arg CAN_Interrupts
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified CAN interrupts.
|
||||
* @param __HANDLE__ CAN handle.
|
||||
* @param __INTERRUPT__ CAN Interrupt sources to disable.
|
||||
* This parameter can be any combination of @arg CAN_Interrupts
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
|
||||
|
||||
/** @brief Check if the specified CAN interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ specifies the CAN Handle.
|
||||
* @param __INTERRUPT__ specifies the CAN interrupt source to check.
|
||||
* This parameter can be a value of @arg CAN_Interrupts
|
||||
* @retval The state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
|
||||
|
||||
/** @brief Check whether the specified CAN flag is set or not.
|
||||
* @param __HANDLE__ specifies the CAN Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of @arg CAN_flags
|
||||
* @retval The state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
|
||||
|
||||
/** @brief Clear the specified CAN pending flag.
|
||||
* @param __HANDLE__ specifies the CAN Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
|
||||
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
|
||||
* @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
|
||||
* @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
|
||||
* @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
|
||||
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
|
||||
* @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
|
||||
* @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
|
||||
* @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
|
||||
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
|
||||
* @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
|
||||
* @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
|
||||
* @arg CAN_FLAG_FF0: RX FIFO 0 Full Flag
|
||||
* @arg CAN_FLAG_FOV0: RX FIFO 0 Overrun Flag
|
||||
* @arg CAN_FLAG_FF1: RX FIFO 1 Full Flag
|
||||
* @arg CAN_FLAG_FOV1: RX FIFO 1 Overrun Flag
|
||||
* @arg CAN_FLAG_WKUI: Wake up Interrupt Flag
|
||||
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CAN_Exported_Functions CAN Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
|
||||
|
||||
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID, void (* pCallback)(CAN_HandleTypeDef *_hcan));
|
||||
HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
|
||||
|
||||
#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group3 Control functions
|
||||
* @brief Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Control functions **********************************************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
|
||||
uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox);
|
||||
HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
|
||||
uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan);
|
||||
uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
|
||||
uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
|
||||
HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
|
||||
uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
|
||||
* @brief Interrupts management
|
||||
* @{
|
||||
*/
|
||||
/* Interrupts management ******************************************************/
|
||||
HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
|
||||
HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
|
||||
void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group5 Callback functions
|
||||
* @brief Callback functions
|
||||
* @{
|
||||
*/
|
||||
/* Callbacks functions ********************************************************/
|
||||
|
||||
void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
|
||||
* @brief CAN Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan);
|
||||
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Types CAN Private Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Variables CAN Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Constants CAN Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FLAG_MASK (0x000000FFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private Macros -----------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Macros CAN Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
|
||||
((MODE) == CAN_MODE_LOOPBACK)|| \
|
||||
((MODE) == CAN_MODE_SILENT) || \
|
||||
((MODE) == CAN_MODE_SILENT_LOOPBACK))
|
||||
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
|
||||
((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
|
||||
#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
|
||||
((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
|
||||
((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
|
||||
((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
|
||||
((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
|
||||
((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
|
||||
((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
|
||||
((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
|
||||
#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
|
||||
((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
|
||||
((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
|
||||
((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
|
||||
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
|
||||
#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
|
||||
#define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U)
|
||||
#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
|
||||
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
|
||||
((MODE) == CAN_FILTERMODE_IDLIST))
|
||||
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
|
||||
((SCALE) == CAN_FILTERSCALE_32BIT))
|
||||
#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
|
||||
((ACTIVATION) == CAN_FILTER_ENABLE))
|
||||
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
|
||||
((FIFO) == CAN_FILTER_FIFO1))
|
||||
#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
|
||||
((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
|
||||
((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
|
||||
#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2))
|
||||
#define IS_CAN_STDID(STDID) ((STDID) <= 0x7FFU)
|
||||
#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
|
||||
#define IS_CAN_DLC(DLC) ((DLC) <= 8U)
|
||||
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
|
||||
((IDTYPE) == CAN_ID_EXT))
|
||||
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
|
||||
#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
|
||||
#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY | CAN_IT_RX_FIFO0_MSG_PENDING | \
|
||||
CAN_IT_RX_FIFO0_FULL | CAN_IT_RX_FIFO0_OVERRUN | \
|
||||
CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL | \
|
||||
CAN_IT_RX_FIFO1_OVERRUN | CAN_IT_WAKEUP | \
|
||||
CAN_IT_SLEEP_ACK | CAN_IT_ERROR_WARNING | \
|
||||
CAN_IT_ERROR_PASSIVE | CAN_IT_BUSOFF | \
|
||||
CAN_IT_LAST_ERROR_CODE | CAN_IT_ERROR))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macros -----------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /* CAN1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_CAN_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,422 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32f2xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_CONF_H
|
||||
#define __STM32F2xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
#define HAL_CAN_MODULE_ENABLED
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
#define HAL_CRYP_MODULE_ENABLED
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
#define HAL_DCMI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_ETH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_NAND_MODULE_ENABLED
|
||||
#define HAL_NOR_MODULE_ENABLED
|
||||
#define HAL_PCCARD_MODULE_ENABLED
|
||||
#define HAL_SRAM_MODULE_ENABLED
|
||||
#define HAL_HASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_I2S_MODULE_ENABLED
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_RNG_MODULE_ENABLED
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
#define HAL_USART_MODULE_ENABLED
|
||||
#define HAL_IRDA_MODULE_ENABLED
|
||||
#define HAL_SMARTCARD_MODULE_ENABLED
|
||||
#define HAL_WWDG_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_HCD_MODULE_ENABLED
|
||||
#define HAL_MMC_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,410 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_CORTEX_H
|
||||
#define __STM32F2xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
|
||||
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
|
||||
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
|
||||
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
|
||||
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,184 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_crc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_CRC_H
|
||||
#define STM32F2xx_HAL_CRC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CRC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Types CRC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief CRC HAL State Structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */
|
||||
HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */
|
||||
HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */
|
||||
HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */
|
||||
HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */
|
||||
} HAL_CRC_StateTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief CRC Handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
CRC_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< CRC Locking object */
|
||||
|
||||
__IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
|
||||
|
||||
} CRC_HandleTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Constants CRC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Macros CRC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CRC handle state.
|
||||
* @param __HANDLE__ CRC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Reset CRC Data Register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
|
||||
|
||||
/**
|
||||
* @brief Store data in the Independent Data (ID) register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @param __VALUE__ Value to be stored in the ID register
|
||||
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
|
||||
|
||||
/**
|
||||
* @brief Return the data stored in the Independent Data (ID) register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
|
||||
* @retval Value of the ID register
|
||||
*/
|
||||
#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Private_Macros CRC Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Functions CRC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions ****************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
|
||||
HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
|
||||
void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
|
||||
void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
|
||||
uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_CRC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,511 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_cryp.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRYP HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_CRYP_H
|
||||
#define __STM32F2xx_HAL_CRYP_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(CRYP)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP CRYP
|
||||
* @brief CRYP HAL module driver.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CRYP_Exported_Types CRYP Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief CRYP Init Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
|
||||
This parameter can be a value of @ref CRYP_Data_Type */
|
||||
uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1.
|
||||
This parameter can be a value of @ref CRYP_Key_Size */
|
||||
uint32_t* pKey; /*!< The key used for encryption/decryption */
|
||||
uint32_t* pInitVect; /*!< The initialization vector used also as initialization
|
||||
counter in CTR mode */
|
||||
uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC*/
|
||||
|
||||
uint32_t DataWidthUnit; /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
|
||||
}CRYP_ConfigTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief CRYP State Structure definition
|
||||
*/
|
||||
|
||||
typedef enum
|
||||
{
|
||||
HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */
|
||||
HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */
|
||||
HAL_CRYP_STATE_BUSY = 0x02U /*!< CRYP BUSY, internal processing is ongoing */
|
||||
}HAL_CRYP_STATETypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief CRYP handle Structure definition
|
||||
*/
|
||||
|
||||
typedef struct __CRYP_HandleTypeDef
|
||||
{
|
||||
|
||||
CRYP_TypeDef *Instance; /*!< CRYP registers base address */
|
||||
|
||||
CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */
|
||||
|
||||
uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
|
||||
|
||||
uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
|
||||
|
||||
__IO uint16_t CrypInCount; /*!< Counter of input data */
|
||||
|
||||
__IO uint16_t CrypOutCount; /*!< Counter of output data */
|
||||
|
||||
uint16_t Size; /*!< length of input data in word */
|
||||
|
||||
uint32_t Phase; /*!< CRYP peripheral phase */
|
||||
|
||||
DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< CRYP locking object */
|
||||
|
||||
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< CRYP peripheral error code */
|
||||
|
||||
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
|
||||
void (*InCpltCallback) (struct __CRYP_HandleTypeDef * hcryp); /*!< CRYP Input FIFO transfer completed callback */
|
||||
void (*OutCpltCallback) (struct __CRYP_HandleTypeDef * hcryp); /*!< CRYP Output FIFO transfer completed callback */
|
||||
void (*ErrorCallback) (struct __CRYP_HandleTypeDef * hcryp); /*!< CRYP Error callback */
|
||||
|
||||
void (* MspInitCallback) (struct __CRYP_HandleTypeDef * hcryp); /*!< CRYP Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef * hcryp); /*!< CRYP Msp DeInit callback */
|
||||
|
||||
#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */
|
||||
|
||||
}CRYP_HandleTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
|
||||
/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition
|
||||
* @brief HAL CRYP Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x01U, /*!< CRYP Input FIFO transfer completed callback ID */
|
||||
HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Output FIFO transfer completed callback ID */
|
||||
HAL_CRYP_ERROR_CB_ID = 0x03U, /*!< CRYP Error callback ID */
|
||||
|
||||
HAL_CRYP_MSPINIT_CB_ID = 0x04U, /*!< CRYP MspInit callback ID */
|
||||
HAL_CRYP_MSPDEINIT_CB_ID = 0x05U /*!< CRYP MspDeInit callback ID */
|
||||
|
||||
}HAL_CRYP_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition
|
||||
* @brief HAL CRYP Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef * hcryp); /*!< pointer to a common CRYP callback function */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Error_Definition CRYP Error Definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */
|
||||
#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */
|
||||
#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */
|
||||
#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */
|
||||
#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */
|
||||
#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */
|
||||
#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */
|
||||
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */
|
||||
#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is word */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define CRYP_DES_ECB CRYP_CR_ALGOMODE_DES_ECB
|
||||
#define CRYP_DES_CBC CRYP_CR_ALGOMODE_DES_CBC
|
||||
#define CRYP_TDES_ECB CRYP_CR_ALGOMODE_TDES_ECB
|
||||
#define CRYP_TDES_CBC CRYP_CR_ALGOMODE_TDES_CBC
|
||||
#define CRYP_AES_ECB CRYP_CR_ALGOMODE_AES_ECB
|
||||
#define CRYP_AES_CBC CRYP_CR_ALGOMODE_AES_CBC
|
||||
#define CRYP_AES_CTR CRYP_CR_ALGOMODE_AES_CTR
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Key_Size CRYP Key Size
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define CRYP_KEYSIZE_128B 0x00000000U
|
||||
#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
|
||||
#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Data_Type CRYP Data Type
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define CRYP_DATATYPE_32B 0x00000000U
|
||||
#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
|
||||
#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
|
||||
#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Interrupt CRYP Interrupt
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define CRYP_IT_INI CRYP_IMSCR_INIM /*!< Input FIFO Interrupt */
|
||||
#define CRYP_IT_OUTI CRYP_IMSCR_OUTIM /*!< Output FIFO Interrupt */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_Flags CRYP Flags
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Flags in the SR register */
|
||||
#define CRYP_FLAG_IFEM CRYP_SR_IFEM /*!< Input FIFO is empty */
|
||||
#define CRYP_FLAG_IFNF CRYP_SR_IFNF /*!< Input FIFO is not Full */
|
||||
#define CRYP_FLAG_OFNE CRYP_SR_OFNE /*!< Output FIFO is not empty */
|
||||
#define CRYP_FLAG_OFFU CRYP_SR_OFFU /*!< Output FIFO is Full */
|
||||
#define CRYP_FLAG_BUSY CRYP_SR_BUSY /*!< The CRYP core is currently processing a block of data
|
||||
or a key preparation (for AES decryption). */
|
||||
/* Flags in the RISR register */
|
||||
#define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw interrupt status */
|
||||
#define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw interrupt status*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CRYP handle state
|
||||
* @param __HANDLE__ specifies the CRYP handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\
|
||||
(__HANDLE__)->State = HAL_CRYP_STATE_RESET;\
|
||||
(__HANDLE__)->MspInitCallback = NULL;\
|
||||
(__HANDLE__)->MspDeInitCallback = NULL;\
|
||||
}while(0)
|
||||
#else
|
||||
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET)
|
||||
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enable/Disable the CRYP peripheral.
|
||||
* @param __HANDLE__: specifies the CRYP handle.
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN)
|
||||
#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)
|
||||
|
||||
/** @brief Check whether the specified CRYP status flag is set or not.
|
||||
* @param __FLAG__: specifies the flag to check.
|
||||
* This parameter can be one of the following values for CRYP:
|
||||
* @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
|
||||
* or a key preparation (for AES decryption).
|
||||
* @arg CRYP_FLAG_IFEM: Input FIFO is empty
|
||||
* @arg CRYP_FLAG_IFNF: Input FIFO is not full
|
||||
* @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
|
||||
* @arg CRYP_FLAG_OFNE: Output FIFO is not empty
|
||||
* @arg CRYP_FLAG_OFFU: Output FIFO is full
|
||||
* @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
|
||||
* @retval The state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define CRYP_FLAG_MASK 0x0000001FU
|
||||
|
||||
#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
|
||||
((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
|
||||
|
||||
/** @brief Check whether the specified CRYP interrupt is set or not.
|
||||
* @param __HANDLE__: specifies the CRYP handle.
|
||||
* @param __INTERRUPT__: specifies the interrupt to check.
|
||||
* This parameter can be one of the following values for CRYP:
|
||||
* @arg CRYP_IT_INI: Input FIFO service masked interrupt status
|
||||
* @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status
|
||||
* @retval The state of __INTERRUPT__ (TRUE or FALSE).
|
||||
*/
|
||||
|
||||
#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Enable the CRYP interrupt.
|
||||
* @param __HANDLE__: specifies the CRYP handle.
|
||||
* @param __INTERRUPT__: CRYP Interrupt.
|
||||
* This parameter can be one of the following values for CRYP:
|
||||
* @ CRYP_IT_INI : Input FIFO service interrupt mask.
|
||||
* @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the CRYP interrupt.
|
||||
* @param __HANDLE__: specifies the CRYP handle.
|
||||
* @param __INTERRUPT__: CRYP Interrupt.
|
||||
* This parameter can be one of the following values for CRYP:
|
||||
* @ CRYP_IT_INI : Input FIFO service interrupt mask.
|
||||
* @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CRYP_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
|
||||
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
|
||||
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
|
||||
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
|
||||
HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf );
|
||||
HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf );
|
||||
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, pCRYP_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CRYP_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* encryption/decryption ***********************************/
|
||||
HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
|
||||
HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
|
||||
HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
|
||||
HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup CRYP_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Interrupt Handler functions **********************************************/
|
||||
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
|
||||
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
|
||||
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
|
||||
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
|
||||
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
|
||||
uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Macros CRYP Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_DES_ECB) || \
|
||||
((ALGORITHM) == CRYP_DES_CBC) || \
|
||||
((ALGORITHM) == CRYP_TDES_ECB) || \
|
||||
((ALGORITHM) == CRYP_TDES_CBC) || \
|
||||
((ALGORITHM) == CRYP_AES_ECB) || \
|
||||
((ALGORITHM) == CRYP_AES_CBC) || \
|
||||
((ALGORITHM) == CRYP_AES_CTR))
|
||||
|
||||
#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \
|
||||
((KEYSIZE) == CRYP_KEYSIZE_192B) || \
|
||||
((KEYSIZE) == CRYP_KEYSIZE_256B))
|
||||
|
||||
#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B) || \
|
||||
((DATATYPE) == CRYP_DATATYPE_16B) || \
|
||||
((DATATYPE) == CRYP_DATATYPE_8B) || \
|
||||
((DATATYPE) == CRYP_DATATYPE_1B))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Constants CRYP Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Defines CRYP Private Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Variables CRYP Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private functions prototypes ----------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Functions_Prototypes CRYP Private Functions Prototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup CRYP_Private_Functions CRYP Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /* CRYP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_CRYP_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,476 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dac.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DAC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_DAC_H
|
||||
#define STM32F2xx_HAL_DAC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
#if defined(DAC)
|
||||
|
||||
/** @addtogroup DAC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DAC_Exported_Types DAC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */
|
||||
HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */
|
||||
HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */
|
||||
HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */
|
||||
HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */
|
||||
|
||||
} HAL_DAC_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DAC handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __DAC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
{
|
||||
DAC_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
__IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DAC locking object */
|
||||
|
||||
DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
|
||||
|
||||
DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DAC Error code */
|
||||
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
void (* ConvCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
|
||||
|
||||
void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
|
||||
|
||||
|
||||
void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac);
|
||||
void (* MspDeInitCallback) (struct __DAC_HandleTypeDef *hdac);
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
|
||||
} DAC_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DAC Configuration regular Channel structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
|
||||
This parameter can be a value of @ref DAC_trigger_selection */
|
||||
|
||||
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
|
||||
This parameter can be a value of @ref DAC_output_buffer */
|
||||
|
||||
} DAC_ChannelConfTypeDef;
|
||||
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL DAC Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */
|
||||
HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */
|
||||
HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */
|
||||
HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */
|
||||
|
||||
HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */
|
||||
HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */
|
||||
HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */
|
||||
HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */
|
||||
|
||||
HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */
|
||||
HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */
|
||||
HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */
|
||||
} HAL_DAC_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DAC Callback pointer definition
|
||||
*/
|
||||
typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac);
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DAC_Exported_Constants DAC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_Error_Code DAC Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */
|
||||
#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */
|
||||
#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */
|
||||
#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */
|
||||
#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_trigger_selection DAC trigger selection
|
||||
* @{
|
||||
*/
|
||||
#define DAC_TRIGGER_NONE 0x00000000UL /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */
|
||||
#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_T4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_T5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_T6_TRGO ( DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */
|
||||
#define DAC_TRIGGER_T7_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
|
||||
#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL1 | DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_output_buffer DAC output buffer
|
||||
* @{
|
||||
*/
|
||||
#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U
|
||||
#define DAC_OUTPUTBUFFER_DISABLE (DAC_CR_BOFF1)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_Channel_selection DAC Channel selection
|
||||
* @{
|
||||
*/
|
||||
#define DAC_CHANNEL_1 0x00000000U
|
||||
|
||||
#define DAC_CHANNEL_2 0x00000010U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_data_alignment DAC data alignment
|
||||
* @{
|
||||
*/
|
||||
#define DAC_ALIGN_12B_R 0x00000000U
|
||||
#define DAC_ALIGN_12B_L 0x00000004U
|
||||
#define DAC_ALIGN_8B_R 0x00000008U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_flags_definition DAC flags definition
|
||||
* @{
|
||||
*/
|
||||
#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1)
|
||||
|
||||
#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2)
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_IT_definition DAC IT definition
|
||||
* @{
|
||||
*/
|
||||
#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1)
|
||||
|
||||
#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2)
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DAC_Exported_Macros DAC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset DAC handle state.
|
||||
* @param __HANDLE__ specifies the DAC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_DAC_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the DAC channel.
|
||||
* @param __HANDLE__ specifies the DAC handle.
|
||||
* @param __DAC_Channel__ specifies the DAC channel
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
|
||||
((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
|
||||
|
||||
/** @brief Disable the DAC channel.
|
||||
* @param __HANDLE__ specifies the DAC handle
|
||||
* @param __DAC_Channel__ specifies the DAC channel.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
|
||||
((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
|
||||
|
||||
/** @brief Set DHR12R1 alignment.
|
||||
* @param __ALIGNMENT__ specifies the DAC alignment
|
||||
* @retval None
|
||||
*/
|
||||
#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__))
|
||||
|
||||
|
||||
/** @brief Set DHR12R2 alignment.
|
||||
* @param __ALIGNMENT__ specifies the DAC alignment
|
||||
* @retval None
|
||||
*/
|
||||
#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__))
|
||||
|
||||
|
||||
/** @brief Set DHR12RD alignment.
|
||||
* @param __ALIGNMENT__ specifies the DAC alignment
|
||||
* @retval None
|
||||
*/
|
||||
#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__))
|
||||
|
||||
/** @brief Enable the DAC interrupt.
|
||||
* @param __HANDLE__ specifies the DAC handle
|
||||
* @param __INTERRUPT__ specifies the DAC interrupt.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
|
||||
* @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the DAC interrupt.
|
||||
* @param __HANDLE__ specifies the DAC handle
|
||||
* @param __INTERRUPT__ specifies the DAC interrupt.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
|
||||
* @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
|
||||
|
||||
/** @brief Check whether the specified DAC interrupt source is enabled or not.
|
||||
* @param __HANDLE__ DAC handle
|
||||
* @param __INTERRUPT__ DAC interrupt source to check
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
|
||||
* @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
|
||||
* @retval State of interruption (SET or RESET)
|
||||
*/
|
||||
#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/** @brief Get the selected DAC's flag status.
|
||||
* @param __HANDLE__ specifies the DAC handle.
|
||||
* @param __FLAG__ specifies the DAC flag to get.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
|
||||
* @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the DAC's flag.
|
||||
* @param __HANDLE__ specifies the DAC handle.
|
||||
* @param __FLAG__ specifies the DAC flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
|
||||
* @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DAC_Private_Macros DAC Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
|
||||
((STATE) == DAC_OUTPUTBUFFER_DISABLE))
|
||||
|
||||
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
|
||||
((CHANNEL) == DAC_CHANNEL_2))
|
||||
|
||||
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
|
||||
((ALIGN) == DAC_ALIGN_12B_L) || \
|
||||
((ALIGN) == DAC_ALIGN_8B_R))
|
||||
|
||||
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include DAC HAL Extended module */
|
||||
#include "stm32f2xx_hal_dac_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup DAC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DAC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac);
|
||||
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DAC_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
|
||||
uint32_t Alignment);
|
||||
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel);
|
||||
void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac);
|
||||
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
|
||||
|
||||
void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
|
||||
|
||||
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
||||
/* DAC callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID,
|
||||
pDAC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DAC_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DAC_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac);
|
||||
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DAC_Private_Functions DAC Private Functions
|
||||
* @{
|
||||
*/
|
||||
void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
|
||||
void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
|
||||
void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* DAC */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_DAC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,203 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dac_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DAC HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_DAC_EX_H
|
||||
#define STM32F2xx_HAL_DAC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
#if defined(DAC)
|
||||
|
||||
/** @addtogroup DACEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude
|
||||
* @{
|
||||
*/
|
||||
#define DAC_LFSRUNMASK_BIT0 0x00000000UL /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
|
||||
#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
|
||||
#define DAC_TRIANGLEAMPLITUDE_1 0x00000000UL /*!< Select max triangle amplitude of 1 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Select max triangle amplitude of 31 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 127 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Select max triangle amplitude of 511 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */
|
||||
#define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DACEx_Private_Macros DACEx Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
|
||||
((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
|
||||
((TRIGGER) == DAC_TRIGGER_SOFTWARE))
|
||||
|
||||
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
|
||||
((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
|
||||
((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/* Extended features functions ***********************************************/
|
||||
|
||||
/** @addtogroup DACEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DACEx_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
|
||||
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
|
||||
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
|
||||
|
||||
HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac);
|
||||
HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac);
|
||||
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
|
||||
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac);
|
||||
|
||||
void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac);
|
||||
void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DACEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */
|
||||
/* are called by HAL_DAC_Start_DMA */
|
||||
void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
|
||||
void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
|
||||
void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* DAC */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_DAC_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,588 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dcmi.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DCMI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_DCMI_H
|
||||
#define STM32F2xx_HAL_DCMI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
#if defined (DCMI)
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DCMI DCMI
|
||||
* @brief DCMI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DCMI_Exported_Types DCMI Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief HAL DCMI State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DCMI_STATE_RESET = 0x00U, /*!< DCMI not yet initialized or disabled */
|
||||
HAL_DCMI_STATE_READY = 0x01U, /*!< DCMI initialized and ready for use */
|
||||
HAL_DCMI_STATE_BUSY = 0x02U, /*!< DCMI internal processing is ongoing */
|
||||
HAL_DCMI_STATE_TIMEOUT = 0x03U, /*!< DCMI timeout state */
|
||||
HAL_DCMI_STATE_ERROR = 0x04U, /*!< DCMI error state */
|
||||
HAL_DCMI_STATE_SUSPENDED = 0x05U /*!< DCMI suspend state */
|
||||
} HAL_DCMI_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DCMIEx Embedded Synchronisation CODE Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
|
||||
uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
|
||||
uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
|
||||
uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
|
||||
} DCMI_CodesInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DCMI Embedded Synchronisation CODE Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t FrameStartUnmask; /*!< Specifies the frame start delimiter unmask. */
|
||||
uint8_t LineStartUnmask; /*!< Specifies the line start delimiter unmask. */
|
||||
uint8_t LineEndUnmask; /*!< Specifies the line end delimiter unmask. */
|
||||
uint8_t FrameEndUnmask; /*!< Specifies the frame end delimiter unmask. */
|
||||
} DCMI_SyncUnmaskTypeDef;
|
||||
/**
|
||||
* @brief DCMI Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
|
||||
This parameter can be a value of @ref DCMI_Synchronization_Mode */
|
||||
|
||||
uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
|
||||
This parameter can be a value of @ref DCMI_PIXCK_Polarity */
|
||||
|
||||
uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
|
||||
This parameter can be a value of @ref DCMI_VSYNC_Polarity */
|
||||
|
||||
uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
|
||||
This parameter can be a value of @ref DCMI_HSYNC_Polarity */
|
||||
|
||||
uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
|
||||
This parameter can be a value of @ref DCMI_Capture_Rate */
|
||||
|
||||
uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
|
||||
This parameter can be a value of @ref DCMI_Extended_Data_Mode */
|
||||
|
||||
DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the line/frame start delimiter and the
|
||||
line/frame end delimiter */
|
||||
|
||||
uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
|
||||
This parameter can be a value of @ref DCMI_MODE_JPEG */
|
||||
} DCMI_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DCMI handle Structure definition
|
||||
*/
|
||||
typedef struct __DCMI_HandleTypeDef
|
||||
{
|
||||
DCMI_TypeDef *Instance; /*!< DCMI Register base address */
|
||||
|
||||
DCMI_InitTypeDef Init; /*!< DCMI parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DCMI locking object */
|
||||
|
||||
__IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
|
||||
|
||||
__IO uint32_t XferCount; /*!< DMA transfer counter */
|
||||
|
||||
__IO uint32_t XferSize; /*!< DMA transfer size */
|
||||
|
||||
uint32_t XferTransferNumber; /*!< DMA transfer number */
|
||||
|
||||
uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
|
||||
|
||||
DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DCMI Error code */
|
||||
#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
|
||||
void (* FrameEventCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Frame Event Callback */
|
||||
void (* VsyncEventCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Vsync Event Callback */
|
||||
void (* LineEventCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Line Event Callback */
|
||||
void (* ErrorCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Error Callback */
|
||||
void (* MspInitCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __DCMI_HandleTypeDef *hdcmi); /*!< DCMI Msp DeInit callback */
|
||||
#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
|
||||
} DCMI_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
|
||||
typedef enum
|
||||
{
|
||||
HAL_DCMI_FRAME_EVENT_CB_ID = 0x00U, /*!< DCMI Frame Event Callback ID */
|
||||
HAL_DCMI_VSYNC_EVENT_CB_ID = 0x01U, /*!< DCMI Vsync Event Callback ID */
|
||||
HAL_DCMI_LINE_EVENT_CB_ID = 0x02U, /*!< DCMI Line Event Callback ID */
|
||||
HAL_DCMI_ERROR_CB_ID = 0x03U, /*!< DCMI Error Callback ID */
|
||||
HAL_DCMI_MSPINIT_CB_ID = 0x04U, /*!< DCMI MspInit callback ID */
|
||||
HAL_DCMI_MSPDEINIT_CB_ID = 0x05U /*!< DCMI MspDeInit callback ID */
|
||||
|
||||
} HAL_DCMI_CallbackIDTypeDef;
|
||||
|
||||
typedef void (*pDCMI_CallbackTypeDef)(DCMI_HandleTypeDef *hdcmi);
|
||||
#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Error_Code DCMI Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
|
||||
#define HAL_DCMI_ERROR_OVR ((uint32_t)0x00000001U) /*!< Overrun error */
|
||||
#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002U) /*!< Synchronization error */
|
||||
#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout error */
|
||||
#define HAL_DCMI_ERROR_DMA ((uint32_t)0x00000040U) /*!< DMA error */
|
||||
#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_DCMI_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid callback error */
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000U) /*!< The received data are transferred continuously
|
||||
into the destination memory through the DMA */
|
||||
#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
|
||||
frame and then transfers a single frame through the DMA */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000U) /*!< Hardware synchronization data capture (frame/line start/stop)
|
||||
is synchronized with the HSYNC/VSYNC signals */
|
||||
#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
|
||||
synchronization codes embedded in the data flow */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000U) /*!< Pixel clock active on Falling edge */
|
||||
#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000U) /*!< Vertical synchronization active Low */
|
||||
#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000U) /*!< Horizontal synchronization active Low */
|
||||
#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000U) /*!< Mode JPEG Disabled */
|
||||
#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000U) /*!< All frames are captured */
|
||||
#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
|
||||
#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000U) /*!< Interface captures 8-bit data on every pixel clock */
|
||||
#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
|
||||
#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
|
||||
#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFFU) /*!< Window coordinate */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Window_Height DCMI Window Height
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFFU) /*!< Window Height */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_interrupt_sources DCMI interrupt sources
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) /*!< Capture complete interrupt */
|
||||
#define DCMI_IT_OVR ((uint32_t)DCMI_IER_OVR_IE) /*!< Overrun interrupt */
|
||||
#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) /*!< Synchronization error interrupt */
|
||||
#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) /*!< VSYNC interrupt */
|
||||
#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) /*!< Line interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DCMI_Flags DCMI Flags
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief DCMI SR register
|
||||
*/
|
||||
#define DCMI_FLAG_HSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines) */
|
||||
#define DCMI_FLAG_VSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */
|
||||
#define DCMI_FLAG_FNE ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE) /*!< FIFO not empty flag */
|
||||
/**
|
||||
* @brief DCMI RIS register
|
||||
*/
|
||||
#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RIS_FRAME_RIS) /*!< Frame capture complete interrupt flag */
|
||||
#define DCMI_FLAG_OVRRI ((uint32_t)DCMI_RIS_OVR_RIS) /*!< Overrun interrupt flag */
|
||||
#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RIS_ERR_RIS) /*!< Synchronization error interrupt flag */
|
||||
#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RIS_VSYNC_RIS) /*!< VSYNC interrupt flag */
|
||||
#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RIS_LINE_RIS) /*!< Line interrupt flag */
|
||||
/**
|
||||
* @brief DCMI MIS register
|
||||
*/
|
||||
#define DCMI_FLAG_FRAMEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS) /*!< DCMI Frame capture complete masked interrupt status */
|
||||
#define DCMI_FLAG_OVRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS ) /*!< DCMI Overrun masked interrupt status */
|
||||
#define DCMI_FLAG_ERRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS ) /*!< DCMI Synchronization error masked interrupt status */
|
||||
#define DCMI_FLAG_VSYNCMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS) /*!< DCMI VSYNC masked interrupt status */
|
||||
#define DCMI_FLAG_LINEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS ) /*!< DCMI Line masked interrupt status */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset DCMI handle state
|
||||
* @param __HANDLE__ specifies the DCMI handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_DCMI_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
|
||||
/**
|
||||
* @brief Enable the DCMI.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
|
||||
|
||||
/**
|
||||
* @brief Disable the DCMI.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
/**
|
||||
* @brief Get the DCMI pending flag.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be one of the following values (no combination allowed)
|
||||
* @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines)
|
||||
* @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames)
|
||||
* @arg DCMI_FLAG_FNE: FIFO empty flag
|
||||
* @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
|
||||
* @arg DCMI_FLAG_OVRRI: Overrun flag mask
|
||||
* @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
|
||||
* @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
|
||||
* @arg DCMI_FLAG_LINERI: Line flag mask
|
||||
* @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status
|
||||
* @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status
|
||||
* @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status
|
||||
* @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status
|
||||
* @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status
|
||||
* @retval The state of FLAG.
|
||||
*/
|
||||
#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
|
||||
((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0)? ((__HANDLE__)->Instance->RIS & (__FLAG__)) :\
|
||||
(((__FLAG__) & DCMI_SR_INDEX) == 0x0)? ((__HANDLE__)->Instance->MIS & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the DCMI pending flags.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
|
||||
* @arg DCMI_FLAG_OVFRI: Overflow flag mask
|
||||
* @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
|
||||
* @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
|
||||
* @arg DCMI_FLAG_LINERI: Line flag mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DCMI interrupts.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @param __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
|
||||
* @arg DCMI_IT_OVF: Overflow interrupt mask
|
||||
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
|
||||
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
|
||||
* @arg DCMI_IT_LINE: Line interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DCMI interrupts.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @param __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
|
||||
* @arg DCMI_IT_OVF: Overflow interrupt mask
|
||||
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
|
||||
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
|
||||
* @arg DCMI_IT_LINE: Line interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DCMI interrupt has occurred or not.
|
||||
* @param __HANDLE__ DCMI handle
|
||||
* @param __INTERRUPT__ specifies the DCMI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
|
||||
* @arg DCMI_IT_OVF: Overflow interrupt mask
|
||||
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
|
||||
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
|
||||
* @arg DCMI_IT_LINE: Line interrupt mask
|
||||
* @retval The state of INTERRUPT.
|
||||
*/
|
||||
#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
|
||||
HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_MspInit(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef *hdcmi);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_DCMI_RegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID, pDCMI_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_DCMI_UnRegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef *hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
|
||||
HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef *hdcmi);
|
||||
HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef *hdcmi);
|
||||
HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
|
||||
void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
|
||||
HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi);
|
||||
HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi);
|
||||
HAL_StatusTypeDef HAL_DCMI_ConfigSyncUnmask(DCMI_HandleTypeDef *hdcmi, DCMI_SyncUnmaskTypeDef *SyncUnmask);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions *************************************************/
|
||||
HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
|
||||
uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup DCMI_Private_Constants DCMI Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define DCMI_MIS_INDEX ((uint32_t)0x1000) /*!< DCMI MIS register index */
|
||||
#define DCMI_SR_INDEX ((uint32_t)0x2000) /*!< DCMI SR register index */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup DCMI_Private_Macros DCMI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
|
||||
((MODE) == DCMI_MODE_SNAPSHOT))
|
||||
|
||||
#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
|
||||
((MODE) == DCMI_SYNCHRO_EMBEDDED))
|
||||
|
||||
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
|
||||
((POLARITY) == DCMI_PCKPOLARITY_RISING))
|
||||
|
||||
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
|
||||
((POLARITY) == DCMI_VSPOLARITY_HIGH))
|
||||
|
||||
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
|
||||
((POLARITY) == DCMI_HSPOLARITY_HIGH))
|
||||
|
||||
#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
|
||||
((JPEG_MODE) == DCMI_JPEG_ENABLE))
|
||||
|
||||
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
|
||||
((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
|
||||
((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
|
||||
|
||||
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
|
||||
((DATA) == DCMI_EXTEND_DATA_10B) || \
|
||||
((DATA) == DCMI_EXTEND_DATA_12B) || \
|
||||
((DATA) == DCMI_EXTEND_DATA_14B))
|
||||
|
||||
#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
|
||||
|
||||
#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @addtogroup DCMI_Private_Functions DCMI Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* DCMI */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_DCMI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dcmi_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DCMI Extension HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_DCMI_EX_H
|
||||
#define __STM32F2xx_HAL_DCMI_EX_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
#endif /* __STM32F2xx_HAL_DCMI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,178 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_DEF
|
||||
#define __STM32F2xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((packed))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4U)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler V5*/
|
||||
#define __ALIGN_BEGIN __align(4U)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
|
||||
/* ARM V4/V5 and V6 & GNU Compiler
|
||||
-------------------------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F2xx_HAL_DEF */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,775 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dma.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_DMA_H
|
||||
#define __STM32F2xx_HAL_DMA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Types DMA Exported Types
|
||||
* @brief DMA Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief DMA Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Channel; /*!< Specifies the channel used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_Channel_selection */
|
||||
|
||||
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
||||
from memory to memory or from peripheral to memory.
|
||||
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
||||
|
||||
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
||||
|
||||
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
||||
|
||||
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
||||
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
||||
|
||||
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
||||
This parameter can be a value of @ref DMA_Memory_data_size */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_mode
|
||||
@note The circular buffer mode cannot be used if the memory-to-memory
|
||||
data transfer is configured on the selected Stream */
|
||||
|
||||
uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_Priority_level */
|
||||
|
||||
uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_FIFO_direct_mode
|
||||
@note The Direct mode (FIFO mode disabled) cannot be used if the
|
||||
memory-to-memory data transfer is configured on the selected stream */
|
||||
|
||||
uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
|
||||
This parameter can be a value of @ref DMA_FIFO_threshold_level */
|
||||
|
||||
uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Memory_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
|
||||
uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Peripheral_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
}DMA_InitTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief HAL DMA State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
||||
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
||||
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
||||
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
|
||||
HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
|
||||
HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
|
||||
}HAL_DMA_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
|
||||
}HAL_DMA_LevelCompleteTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
|
||||
HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
|
||||
HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
|
||||
HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
|
||||
HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
|
||||
HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
|
||||
}HAL_DMA_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA_HandleTypeDef
|
||||
{
|
||||
DMA_Stream_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
||||
|
||||
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
||||
|
||||
void *Parent; /*!< Parent object state */
|
||||
|
||||
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
||||
|
||||
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
||||
|
||||
void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
|
||||
|
||||
void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
|
||||
|
||||
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
||||
|
||||
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
||||
|
||||
uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
|
||||
|
||||
uint32_t StreamIndex; /*!< DMA Stream Index */
|
||||
|
||||
}DMA_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Error_Code DMA Error Code
|
||||
* @brief DMA Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
|
||||
#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
|
||||
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
|
||||
#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
|
||||
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Channel_selection DMA Channel selection
|
||||
* @brief DMA channel selection
|
||||
* @{
|
||||
*/
|
||||
#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
|
||||
#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
|
||||
#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
|
||||
#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
|
||||
#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
|
||||
#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
|
||||
#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
|
||||
#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
||||
* @brief DMA data transfer direction
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
||||
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
|
||||
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
||||
* @brief DMA peripheral incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
|
||||
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
||||
* @brief DMA memory incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
|
||||
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
||||
* @brief DMA peripheral data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
|
||||
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
|
||||
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
||||
* @brief DMA memory data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
|
||||
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
|
||||
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_mode DMA mode
|
||||
* @brief DMA mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
|
||||
#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Priority_level DMA Priority level
|
||||
* @brief DMA priority levels
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
|
||||
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
|
||||
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
|
||||
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
|
||||
* @brief DMA FIFO direct mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
|
||||
#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
|
||||
* @brief DMA FIFO level
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_burst DMA Memory burst
|
||||
* @brief DMA memory burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MBURST_SINGLE 0x00000000U
|
||||
#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
|
||||
#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
|
||||
#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
|
||||
* @brief DMA peripheral burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PBURST_SINGLE 0x00000000U
|
||||
#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
|
||||
#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
|
||||
#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
||||
* @brief DMA interrupts definition
|
||||
* @{
|
||||
*/
|
||||
#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
|
||||
#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
|
||||
#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
|
||||
#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
|
||||
#define DMA_IT_FE 0x00000080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_flag_definitions DMA flag definitions
|
||||
* @brief DMA flag definitions
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FLAG_FEIF0_4 0x00000001U
|
||||
#define DMA_FLAG_DMEIF0_4 0x00000004U
|
||||
#define DMA_FLAG_TEIF0_4 0x00000008U
|
||||
#define DMA_FLAG_HTIF0_4 0x00000010U
|
||||
#define DMA_FLAG_TCIF0_4 0x00000020U
|
||||
#define DMA_FLAG_FEIF1_5 0x00000040U
|
||||
#define DMA_FLAG_DMEIF1_5 0x00000100U
|
||||
#define DMA_FLAG_TEIF1_5 0x00000200U
|
||||
#define DMA_FLAG_HTIF1_5 0x00000400U
|
||||
#define DMA_FLAG_TCIF1_5 0x00000800U
|
||||
#define DMA_FLAG_FEIF2_6 0x00010000U
|
||||
#define DMA_FLAG_DMEIF2_6 0x00040000U
|
||||
#define DMA_FLAG_TEIF2_6 0x00080000U
|
||||
#define DMA_FLAG_HTIF2_6 0x00100000U
|
||||
#define DMA_FLAG_TCIF2_6 0x00200000U
|
||||
#define DMA_FLAG_FEIF3_7 0x00400000U
|
||||
#define DMA_FLAG_DMEIF3_7 0x01000000U
|
||||
#define DMA_FLAG_TEIF3_7 0x02000000U
|
||||
#define DMA_FLAG_HTIF3_7 0x04000000U
|
||||
#define DMA_FLAG_TCIF3_7 0x08000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @brief Reset DMA handle state
|
||||
* @param __HANDLE__ specifies the DMA handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO filled level.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The FIFO filling state.
|
||||
* - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
|
||||
* and not empty.
|
||||
* - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
|
||||
* - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
|
||||
* - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
|
||||
* - DMA_FIFOStatus_Empty: when FIFO is empty
|
||||
* - DMA_FIFOStatus_Full: when FIFO is full
|
||||
*/
|
||||
#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
DMA_FLAG_TCIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream half transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified half transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
DMA_FLAG_HTIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
DMA_FLAG_TEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified FIFO error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
DMA_FLAG_FEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream direct mode error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified direct mode error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
DMA_FLAG_DMEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Get the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA Stream interrupt is enabled or disabled.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval The state of DMA_IT.
|
||||
*/
|
||||
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
|
||||
((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Writes the number of data units to be transferred on the DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
|
||||
* Number of data items depends only on the Peripheral data format.
|
||||
*
|
||||
* @note If Peripheral data format is Bytes: number of data units is equal
|
||||
* to total number of bytes to be transferred.
|
||||
*
|
||||
* @note If Peripheral data format is Half-Word: number of data units is
|
||||
* equal to total number of bytes to be transferred / 2.
|
||||
*
|
||||
* @note If Peripheral data format is Word: number of data units is equal
|
||||
* to total number of bytes to be transferred / 4.
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMAy Streamx transfer.
|
||||
*/
|
||||
#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
|
||||
|
||||
/**
|
||||
* @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
|
||||
* @param __HANDLE__ DMA handle
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMA Stream transfer.
|
||||
*/
|
||||
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
|
||||
|
||||
|
||||
/* Include DMA HAL Extension module */
|
||||
#include "stm32f2xx_hal_dma_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions DMA Exported Functions
|
||||
* @brief DMA Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
|
||||
* @brief I/O operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
|
||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
|
||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
|
||||
* @brief Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private Constants -------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Constants DMA Private Constants
|
||||
* @brief DMA private defines and constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Macros DMA Private Macros
|
||||
* @brief DMA private macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7))
|
||||
|
||||
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
||||
|
||||
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
||||
((STATE) == DMA_PINC_DISABLE))
|
||||
|
||||
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
||||
((STATE) == DMA_MINC_DISABLE))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_PDATAALIGN_WORD))
|
||||
|
||||
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_MDATAALIGN_WORD ))
|
||||
|
||||
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
||||
((MODE) == DMA_CIRCULAR) || \
|
||||
((MODE) == DMA_PFCTRL))
|
||||
|
||||
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
||||
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
||||
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
||||
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
||||
|
||||
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
|
||||
((STATE) == DMA_FIFOMODE_ENABLE))
|
||||
|
||||
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
|
||||
|
||||
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
|
||||
((BURST) == DMA_MBURST_INC4) || \
|
||||
((BURST) == DMA_MBURST_INC8) || \
|
||||
((BURST) == DMA_MBURST_INC16))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
|
||||
((BURST) == DMA_PBURST_INC4) || \
|
||||
((BURST) == DMA_PBURST_INC8) || \
|
||||
((BURST) == DMA_PBURST_INC16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Functions DMA Private Functions
|
||||
* @brief DMA private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_DMA_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,104 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_DMA_EX_H
|
||||
#define __STM32F2xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U /*!< Memory 1 */
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_DMA_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,293 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_EXTI_H
|
||||
#define STM32F2xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL EXTI common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#define EXTI_LINE_NB 23uL
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI))
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_EXTI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,419 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_FLASH_H
|
||||
#define __STM32F2xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
||||
|
||||
__IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
|
||||
|
||||
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
||||
|
||||
__IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
|
||||
|
||||
__IO uint32_t Address; /*Internal variable to save address selected for program*/
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
}FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_FLASH_ERROR_PGS 0x00000001U /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP 0x00000002U /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA 0x00000004U /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP 0x00000008U /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION 0x00000010U /*!< Operation Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE 0x00U /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD 0x01U /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD 0x02U /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x03U /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE 0x00000000U
|
||||
#define FLASH_PSIZE_HALF_WORD 0x00000100U
|
||||
#define FLASH_PSIZE_WORD 0x00000200U
|
||||
#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
|
||||
#define CR_PSIZE_MASK 0xFFFFFCFFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define RDP_KEY ((uint16_t)0x00A5)
|
||||
#define FLASH_KEY1 0x45670123U
|
||||
#define FLASH_KEY2 0xCDEF89ABU
|
||||
#define FLASH_OPT_KEY1 0x08192A3BU
|
||||
#define FLASH_OPT_KEY2 0x4C5D6E7FU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH instruction Cache.
|
||||
* @note This function must be used only when the Instruction Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_ICRST; \
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH data Cache.
|
||||
* @note This function must be used only when the data Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_DCRST; \
|
||||
}while(0U)
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flags to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flags.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f2xx_hal_flash_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief ACR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define ACR_BYTE0_ADDRESS 0x40023C00U
|
||||
/**
|
||||
* @brief OPTCR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE0_ADDRESS 0x40023C14U
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS 0x40023C15U
|
||||
/**
|
||||
* @brief OPTCR register byte 2 (Bits[23:16]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE2_ADDRESS 0x40023C16U
|
||||
/**
|
||||
* @brief OPTCR register byte 3 (Bits[31:24]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE3_ADDRESS 0x40023C17U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_FLASH_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,409 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_flash_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_FLASH_EX_H
|
||||
#define __STM32F2xx_HAL_FLASH_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Erase structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t TypeErase; /*!< Mass erase or sector Erase.
|
||||
This parameter can be a value of @ref FLASHEx_Type_Erase */
|
||||
|
||||
uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
|
||||
This parameter must be a value of @ref FLASHEx_Banks */
|
||||
|
||||
uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
|
||||
This parameter must be a value of @ref FLASHEx_Sectors */
|
||||
|
||||
uint32_t NbSectors; /*!< Number of sectors to be erased.
|
||||
This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
|
||||
|
||||
uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
|
||||
This parameter must be a value of @ref FLASHEx_Voltage_Range */
|
||||
|
||||
} FLASH_EraseInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH Option Bytes Program structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t OptionType; /*!< Option byte to be configured.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Type */
|
||||
|
||||
uint32_t WRPState; /*!< Write protection activation or deactivation.
|
||||
This parameter can be a value of @ref FLASHEx_WRP_State */
|
||||
|
||||
uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
|
||||
The value of this parameter depend on device used within the same series */
|
||||
|
||||
uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
|
||||
This parameter must be a value of @ref FLASHEx_Banks */
|
||||
|
||||
uint32_t RDPLevel; /*!< Set the read protection level.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
|
||||
|
||||
uint32_t BORLevel; /*!< Set the BOR Level.
|
||||
This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
|
||||
|
||||
uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
|
||||
|
||||
} FLASH_OBProgramInitTypeDef;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */
|
||||
#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */
|
||||
#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */
|
||||
#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */
|
||||
#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_WRP_State FLASH WRP State
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */
|
||||
#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Type FLASH Option Type
|
||||
* @{
|
||||
*/
|
||||
#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */
|
||||
#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */
|
||||
#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */
|
||||
#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
|
||||
#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
|
||||
#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
|
||||
it s no more possible to go back to level 1 or 0 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
|
||||
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
|
||||
* @{
|
||||
*/
|
||||
#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
|
||||
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
|
||||
* @{
|
||||
*/
|
||||
#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
|
||||
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
|
||||
* @{
|
||||
*/
|
||||
#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
|
||||
#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
|
||||
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
|
||||
#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Latency FLASH Latency
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
|
||||
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
|
||||
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
|
||||
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
|
||||
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
|
||||
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
|
||||
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
|
||||
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FLASHEx_Banks FLASH Banks
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_BANK_1 1U /*!< Bank 1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_MER_BIT FLASH_CR_MER /*!< only 1 MER Bit */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Sectors FLASH Sectors
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
|
||||
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
|
||||
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
|
||||
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
|
||||
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
|
||||
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
|
||||
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
|
||||
#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */
|
||||
#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */
|
||||
#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */
|
||||
#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */
|
||||
#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */
|
||||
#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */
|
||||
#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */
|
||||
#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */
|
||||
#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */
|
||||
#define OB_WRP_SECTOR_8 0x00000100U /*!< Write protection of Sector8 */
|
||||
#define OB_WRP_SECTOR_9 0x00000200U /*!< Write protection of Sector9 */
|
||||
#define OB_WRP_SECTOR_10 0x00000400U /*!< Write protection of Sector10 */
|
||||
#define OB_WRP_SECTOR_11 0x00000800U /*!< Write protection of Sector11 */
|
||||
#define OB_WRP_SECTOR_All 0x00000FFFU /*!< Write protection of all Sectors */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASHEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Extension Program operation functions *************************************/
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define FLASH_SECTOR_TOTAL 12U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
|
||||
((VALUE) == FLASH_TYPEERASE_MASSERASE))
|
||||
|
||||
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_4))
|
||||
|
||||
#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
|
||||
((VALUE) == OB_WRPSTATE_ENABLE))
|
||||
|
||||
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
|
||||
|
||||
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_1) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_2))
|
||||
|
||||
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
|
||||
|
||||
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
|
||||
|
||||
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
|
||||
|
||||
#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
|
||||
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
|
||||
|
||||
|
||||
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
|
||||
((LATENCY) == FLASH_LATENCY_1) || \
|
||||
((LATENCY) == FLASH_LATENCY_2) || \
|
||||
((LATENCY) == FLASH_LATENCY_3) || \
|
||||
((LATENCY) == FLASH_LATENCY_4) || \
|
||||
((LATENCY) == FLASH_LATENCY_5) || \
|
||||
((LATENCY) == FLASH_LATENCY_6) || \
|
||||
((LATENCY) == FLASH_LATENCY_7))
|
||||
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
|
||||
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
|
||||
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
|
||||
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
|
||||
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
|
||||
|
||||
|
||||
|
||||
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
|
||||
(((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
|
||||
#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
|
||||
#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
|
||||
void FLASH_FlushCaches(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_FLASH_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,325 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_GPIO_H
|
||||
#define __STM32F2xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0U,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0x00WX00YZ
|
||||
* - W : EXTI trigger detection on 3 bits
|
||||
* - X : EXTI mode (IT or Event) on 2 bits
|
||||
* - Y : Output type (Push Pull or Open Drain) on 1 bit
|
||||
* - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f2xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_Pos 0U
|
||||
#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
|
||||
#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
|
||||
#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
|
||||
#define MODE_AF (0x2UL << GPIO_MODE_Pos)
|
||||
#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
|
||||
#define OUTPUT_TYPE_Pos 4U
|
||||
#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define EXTI_MODE_Pos 16U
|
||||
#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
|
||||
#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
|
||||
#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
|
||||
#define TRIGGER_MODE_Pos 20U
|
||||
#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_GPIO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,281 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_gpio_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_GPIO_EX_H
|
||||
#define __STM32F2xx_HAL_GPIO_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIOEx GPIOEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Alternate_function_selection GPIO Alternate function selection
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
|
||||
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
|
||||
#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
|
||||
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
|
||||
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
|
||||
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
|
||||
#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */
|
||||
#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */
|
||||
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */
|
||||
#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
|
||||
((__GPIOx__) == (GPIOB))? 1U :\
|
||||
((__GPIOx__) == (GPIOC))? 2U :\
|
||||
((__GPIOx__) == (GPIOD))? 3U :\
|
||||
((__GPIOx__) == (GPIOE))? 4U :\
|
||||
((__GPIOx__) == (GPIOF))? 5U :\
|
||||
((__GPIOx__) == (GPIOG))? 6U :\
|
||||
((__GPIOx__) == (GPIOH))? 7U :\
|
||||
((__GPIOx__) == (GPIOI))? 8U : 9U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
|
||||
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
|
||||
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
|
||||
((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
|
||||
#else /* STM32F207xx || STM32F217xx */
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
|
||||
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
|
||||
((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
|
||||
((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_GPIO_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,590 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_hash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of HASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_HASH_H
|
||||
#define STM32F2xx_HAL_HASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
#if defined (HASH)
|
||||
/** @addtogroup HASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup HASH_Exported_Types HASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HASH Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit data.
|
||||
This parameter can be a value of @ref HASH_Data_Type. */
|
||||
|
||||
uint32_t KeySize; /*!< The key size is used only in HMAC operation. */
|
||||
|
||||
uint8_t *pKey; /*!< The key is used only in HMAC operation. */
|
||||
|
||||
} HASH_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HASH_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */
|
||||
HAL_HASH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_HASH_STATE_BUSY = 0x02U, /*!< Processing (hashing) is ongoing */
|
||||
HAL_HASH_STATE_TIMEOUT = 0x06U, /*!< Timeout state */
|
||||
HAL_HASH_STATE_ERROR = 0x07U, /*!< Error state */
|
||||
HAL_HASH_STATE_SUSPENDED = 0x08U /*!< Suspended state */
|
||||
} HAL_HASH_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL phase structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HASH_PHASE_READY = 0x01U, /*!< HASH peripheral is ready to start */
|
||||
HAL_HASH_PHASE_PROCESS = 0x02U, /*!< HASH peripheral is in HASH processing phase */
|
||||
HAL_HASH_PHASE_HMAC_STEP_1 = 0x03U, /*!< HASH peripheral is in HMAC step 1 processing phase
|
||||
(step 1 consists in entering the inner hash function key) */
|
||||
HAL_HASH_PHASE_HMAC_STEP_2 = 0x04U, /*!< HASH peripheral is in HMAC step 2 processing phase
|
||||
(step 2 consists in entering the message text) */
|
||||
HAL_HASH_PHASE_HMAC_STEP_3 = 0x05U /*!< HASH peripheral is in HMAC step 3 processing phase
|
||||
(step 3 consists in entering the outer hash function key) */
|
||||
} HAL_HASH_PhaseTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL HASH mode suspend definitions
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HASH_SUSPEND_NONE = 0x00U, /*!< HASH peripheral suspension not requested */
|
||||
HAL_HASH_SUSPEND = 0x01U /*!< HASH peripheral suspension is requested */
|
||||
} HAL_HASH_SuspendTypeDef;
|
||||
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
|
||||
/**
|
||||
* @brief HAL HASH common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HASH_MSPINIT_CB_ID = 0x00U, /*!< HASH MspInit callback ID */
|
||||
HAL_HASH_MSPDEINIT_CB_ID = 0x01U, /*!< HASH MspDeInit callback ID */
|
||||
HAL_HASH_INPUTCPLT_CB_ID = 0x02U, /*!< HASH input completion callback ID */
|
||||
HAL_HASH_DGSTCPLT_CB_ID = 0x03U, /*!< HASH digest computation completion callback ID */
|
||||
HAL_HASH_ERROR_CB_ID = 0x04U, /*!< HASH error callback ID */
|
||||
} HAL_HASH_CallbackIDTypeDef;
|
||||
#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @brief HASH Handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __HASH_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
|
||||
{
|
||||
HASH_InitTypeDef Init; /*!< HASH required parameters */
|
||||
|
||||
uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
|
||||
|
||||
uint8_t *pHashOutBuffPtr; /*!< Pointer to output buffer (digest) */
|
||||
|
||||
uint8_t *pHashKeyBuffPtr; /*!< Pointer to key buffer (HMAC only) */
|
||||
|
||||
uint8_t *pHashMsgBuffPtr; /*!< Pointer to message buffer (HMAC only) */
|
||||
|
||||
uint32_t HashBuffSize; /*!< Size of buffer to be processed */
|
||||
|
||||
__IO uint32_t HashInCount; /*!< Counter of inputted data */
|
||||
|
||||
__IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
|
||||
|
||||
__IO uint32_t HashKeyCount; /*!< Counter for Key inputted data (HMAC only) */
|
||||
|
||||
HAL_StatusTypeDef Status; /*!< HASH peripheral status */
|
||||
|
||||
HAL_HASH_PhaseTypeDef Phase; /*!< HASH peripheral phase */
|
||||
|
||||
DMA_HandleTypeDef *hdmain; /*!< HASH In DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_HASH_StateTypeDef State; /*!< HASH peripheral state */
|
||||
|
||||
HAL_HASH_SuspendTypeDef SuspendRequest; /*!< HASH peripheral suspension request flag */
|
||||
|
||||
FlagStatus DigestCalculationDisable; /*!< Digest calculation phase skip (MDMAT bit control) for multi-buffers DMA-based HMAC computation */
|
||||
|
||||
__IO uint32_t NbWordsAlreadyPushed; /*!< Numbers of words already pushed in FIFO before inputting new block */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< HASH Error code */
|
||||
|
||||
__IO uint32_t Accumulation; /*!< HASH multi buffers accumulation flag */
|
||||
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
|
||||
void (* InCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH input completion callback */
|
||||
|
||||
void (* DgstCpltCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH digest computation completion callback */
|
||||
|
||||
void (* ErrorCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH error callback */
|
||||
|
||||
void (* MspInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp Init callback */
|
||||
|
||||
void (* MspDeInitCallback)(struct __HASH_HandleTypeDef *hhash); /*!< HASH Msp DeInit callback */
|
||||
|
||||
#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
|
||||
} HASH_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
|
||||
/**
|
||||
* @brief HAL HASH Callback pointer definition
|
||||
*/
|
||||
typedef void (*pHASH_CallbackTypeDef)(HASH_HandleTypeDef *hhash); /*!< pointer to a HASH common callback functions */
|
||||
#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HASH_Exported_Constants HASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_Algo_Selection HASH algorithm selection
|
||||
* @{
|
||||
*/
|
||||
#define HASH_ALGOSELECTION_SHA1 0x00000000U /*!< HASH function is SHA1 */
|
||||
#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_Algorithm_Mode HASH algorithm mode
|
||||
* @{
|
||||
*/
|
||||
#define HASH_ALGOMODE_HASH 0x00000000U /*!< Algorithm is HASH */
|
||||
#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_Data_Type HASH input data type
|
||||
* @{
|
||||
*/
|
||||
#define HASH_DATATYPE_32B 0x00000000U /*!< 32-bit data. No swapping */
|
||||
#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
|
||||
#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
|
||||
#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode HMAC key length type
|
||||
* @{
|
||||
*/
|
||||
#define HASH_HMAC_KEYTYPE_SHORTKEY 0x00000000U /*!< HMAC Key size is <= 64 bytes */
|
||||
#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key size is > 64 bytes */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_flags_definition HASH flags definitions
|
||||
* @{
|
||||
*/
|
||||
#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : a new block can be entered in the Peripheral */
|
||||
#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
|
||||
#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
|
||||
#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy, processing a block of data */
|
||||
#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : the input buffer contains at least one word of data */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_interrupts_definition HASH interrupts definitions
|
||||
* @{
|
||||
*/
|
||||
#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */
|
||||
#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HASH_Error_Definition HASH Error Definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_HASH_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_HASH_ERROR_IT 0x00000001U /*!< IT-based process error */
|
||||
#define HAL_HASH_ERROR_DMA 0x00000002U /*!< DMA-based process error */
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_HASH_ERROR_INVALID_CALLBACK 0x00000004U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup HASH_Exported_Macros HASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check whether or not the specified HASH flag is set.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer.
|
||||
* @arg @ref HASH_FLAG_DCIS Digest calculation complete.
|
||||
* @arg @ref HASH_FLAG_DMAS DMA interface is enabled (DMAE=1) or a transfer is ongoing.
|
||||
* @arg @ref HASH_FLAG_BUSY The hash core is Busy : processing a block of data.
|
||||
* @arg @ref HASH_FLAG_DINNE DIN not empty : the input buffer contains at least one word of data.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? \
|
||||
((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
|
||||
((HASH->SR & (__FLAG__)) == (__FLAG__)) )
|
||||
|
||||
|
||||
/** @brief Clear the specified HASH flag.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer.
|
||||
* @arg @ref HASH_FLAG_DCIS Digest calculation complete
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_CLEAR_FLAG(__FLAG__) CLEAR_BIT(HASH->SR, (__FLAG__))
|
||||
|
||||
|
||||
/** @brief Enable the specified HASH interrupt.
|
||||
* @param __INTERRUPT__ specifies the HASH interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN)
|
||||
* @arg @ref HASH_IT_DCI Digest calculation complete
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_ENABLE_IT(__INTERRUPT__) SET_BIT(HASH->IMR, (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the specified HASH interrupt.
|
||||
* @param __INTERRUPT__ specifies the HASH interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref HASH_IT_DINI A new block can be entered into the input buffer (DIN)
|
||||
* @arg @ref HASH_IT_DCI Digest calculation complete
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(HASH->IMR, (__INTERRUPT__))
|
||||
|
||||
/** @brief Reset HASH handle state.
|
||||
* @param __HANDLE__ HASH handle.
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) do{\
|
||||
(__HANDLE__)->State = HAL_HASH_STATE_RESET;\
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
}while(0)
|
||||
#else
|
||||
#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
|
||||
#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/** @brief Reset HASH handle status.
|
||||
* @param __HANDLE__ HASH handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_RESET_HANDLE_STATUS(__HANDLE__) ((__HANDLE__)->Status = HAL_OK)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Start the digest computation.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_START_DIGEST() SET_BIT(HASH->STR, HASH_STR_DCAL)
|
||||
|
||||
/**
|
||||
* @brief Set the number of valid bits in the last word written in data register DIN.
|
||||
* @param __SIZE__ size in bytes of last data written in Data register.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_SET_NBVALIDBITS(__SIZE__) MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * ((__SIZE__) % 4U))
|
||||
|
||||
/**
|
||||
* @brief Reset the HASH core.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_HASH_INIT() SET_BIT(HASH->CR, HASH_CR_INIT)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup HASH_Private_Macros HASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define HASH_DIGEST_LENGTH() ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA1) ? 20U : 16)
|
||||
/**
|
||||
* @brief Return number of words already pushed in the FIFO.
|
||||
* @retval Number of words already pushed in the FIFO
|
||||
*/
|
||||
#define HASH_NBW_PUSHED() ((READ_BIT(HASH->CR, HASH_CR_NBW)) >> 8U)
|
||||
|
||||
/**
|
||||
* @brief Ensure that HASH input data type is valid.
|
||||
* @param __DATATYPE__ HASH input data type.
|
||||
* @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)
|
||||
*/
|
||||
#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
|
||||
((__DATATYPE__) == HASH_DATATYPE_16B)|| \
|
||||
((__DATATYPE__) == HASH_DATATYPE_8B) || \
|
||||
((__DATATYPE__) == HASH_DATATYPE_1B))
|
||||
|
||||
/**
|
||||
* @brief Ensure that handle phase is set to HASH processing.
|
||||
* @param __HANDLE__ HASH handle.
|
||||
* @retval SET (handle phase is set to HASH processing) or RESET (handle phase is not set to HASH processing)
|
||||
*/
|
||||
#define IS_HASH_PROCESSING(__HANDLE__) ((__HANDLE__)->Phase == HAL_HASH_PHASE_PROCESS)
|
||||
|
||||
/**
|
||||
* @brief Ensure that handle phase is set to HMAC processing.
|
||||
* @param __HANDLE__ HASH handle.
|
||||
* @retval SET (handle phase is set to HMAC processing) or RESET (handle phase is not set to HMAC processing)
|
||||
*/
|
||||
#define IS_HMAC_PROCESSING(__HANDLE__) (((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || \
|
||||
((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_2) || \
|
||||
((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_3))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions HASH Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization methods **********************************/
|
||||
HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
|
||||
HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID,
|
||||
pHASH_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group2 HASH processing functions in polling mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/* HASH processing using polling *********************************************/
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer, uint32_t Timeout);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group3 HASH processing functions in interrupt mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* HASH processing using IT **************************************************/
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group4 HASH processing functions in DMA mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* HASH processing using DMA *************************************************/
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group5 HMAC processing functions in polling mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* HASH-MAC processing using polling *****************************************/
|
||||
HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group6 HMAC processing functions in interrupt mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
HAL_StatusTypeDef HAL_HMAC_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
HAL_StatusTypeDef HAL_HMAC_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size,
|
||||
uint8_t *pOutBuffer);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group7 HMAC processing functions in DMA mode
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* HASH-HMAC processing using DMA ********************************************/
|
||||
HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HASH_Exported_Functions_Group8 Peripheral states functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/* Peripheral State methods **************************************************/
|
||||
HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
|
||||
HAL_StatusTypeDef HAL_HASH_GetStatus(HASH_HandleTypeDef *hhash);
|
||||
void HAL_HASH_ContextSaving(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer);
|
||||
void HAL_HASH_ContextRestoring(HASH_HandleTypeDef *hhash, uint8_t *pMemBuffer);
|
||||
void HAL_HASH_SwFeed_ProcessSuspend(HASH_HandleTypeDef *hhash);
|
||||
HAL_StatusTypeDef HAL_HASH_DMAFeed_ProcessSuspend(HASH_HandleTypeDef *hhash);
|
||||
uint32_t HAL_HASH_GetError(HASH_HandleTypeDef *hhash);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions -----------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup HASH_Private_Functions HASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private functions */
|
||||
HAL_StatusTypeDef HASH_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout, uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HASH_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HASH_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HASH_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HASH_Finish(HASH_HandleTypeDef *hhash, uint8_t *pOutBuffer, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HMAC_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Timeout, uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HMAC_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t *pOutBuffer,
|
||||
uint32_t Algorithm);
|
||||
HAL_StatusTypeDef HMAC_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* HASH*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_HASH_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,319 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_hcd.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of HCD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_HCD_H
|
||||
#define STM32F2xx_HAL_HCD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_usb.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HCD HCD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup HCD_Exported_Types HCD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HCD_STATE_RESET = 0x00,
|
||||
HAL_HCD_STATE_READY = 0x01,
|
||||
HAL_HCD_STATE_ERROR = 0x02,
|
||||
HAL_HCD_STATE_BUSY = 0x03,
|
||||
HAL_HCD_STATE_TIMEOUT = 0x04
|
||||
} HCD_StateTypeDef;
|
||||
|
||||
typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
|
||||
typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
|
||||
typedef USB_OTG_HCTypeDef HCD_HCTypeDef;
|
||||
typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef;
|
||||
typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
||||
typedef struct __HCD_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
||||
{
|
||||
HCD_TypeDef *Instance; /*!< Register base address */
|
||||
HCD_InitTypeDef Init; /*!< HCD required parameters */
|
||||
HCD_HCTypeDef hc[16]; /*!< Host channels parameters */
|
||||
HAL_LockTypeDef Lock; /*!< HCD peripheral status */
|
||||
__IO HCD_StateTypeDef State; /*!< HCD communication state */
|
||||
__IO uint32_t ErrorCode; /*!< HCD Error code */
|
||||
void *pData; /*!< Pointer Stack Handler */
|
||||
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
||||
void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD SOF callback */
|
||||
void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Connect callback */
|
||||
void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Disconnect callback */
|
||||
void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Enable callback */
|
||||
void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Port Disable callback */
|
||||
void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum,
|
||||
HCD_URBStateTypeDef urb_state); /*!< USB OTG HCD Host Channel Notify URB Change callback */
|
||||
|
||||
void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd); /*!< USB OTG HCD Msp DeInit callback */
|
||||
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
||||
} HCD_HandleTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup HCD_Exported_Constants HCD Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Speed HCD Speed
|
||||
* @{
|
||||
*/
|
||||
#define HCD_SPEED_HIGH USBH_HS_SPEED
|
||||
#define HCD_SPEED_FULL USBH_FSLS_SPEED
|
||||
#define HCD_SPEED_LOW USBH_FSLS_SPEED
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Device_Speed HCD Device Speed
|
||||
* @{
|
||||
*/
|
||||
#define HCD_DEVICE_SPEED_HIGH 0U
|
||||
#define HCD_DEVICE_SPEED_FULL 1U
|
||||
#define HCD_DEVICE_SPEED_LOW 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_PHY_Module HCD PHY Module
|
||||
* @{
|
||||
*/
|
||||
#define HCD_PHY_ULPI 1U
|
||||
#define HCD_PHY_EMBEDDED 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Error_Code_definition HCD Error Code definition
|
||||
* @brief HCD Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_HCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HCD_Exported_Macros HCD Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
|
||||
#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
|
||||
|
||||
#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
|
||||
#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
|
||||
|
||||
#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
|
||||
#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
|
||||
#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
|
||||
#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
|
||||
#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HCD_Exported_Functions HCD Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
|
||||
HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
|
||||
HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
|
||||
uint8_t epnum, uint8_t dev_address,
|
||||
uint8_t speed, uint8_t ep_type, uint16_t mps);
|
||||
|
||||
HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
|
||||
void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
|
||||
|
||||
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
||||
/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition
|
||||
* @brief HAL USB OTG HCD Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_HCD_SOF_CB_ID = 0x01, /*!< USB HCD SOF callback ID */
|
||||
HAL_HCD_CONNECT_CB_ID = 0x02, /*!< USB HCD Connect callback ID */
|
||||
HAL_HCD_DISCONNECT_CB_ID = 0x03, /*!< USB HCD Disconnect callback ID */
|
||||
HAL_HCD_PORT_ENABLED_CB_ID = 0x04, /*!< USB HCD Port Enable callback ID */
|
||||
HAL_HCD_PORT_DISABLED_CB_ID = 0x05, /*!< USB HCD Port Disable callback ID */
|
||||
|
||||
HAL_HCD_MSPINIT_CB_ID = 0x06, /*!< USB HCD MspInit callback ID */
|
||||
HAL_HCD_MSPDEINIT_CB_ID = 0x07 /*!< USB HCD MspDeInit callback ID */
|
||||
|
||||
} HAL_HCD_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition
|
||||
* @brief HAL USB OTG HCD Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd); /*!< pointer to a common USB OTG HCD callback function */
|
||||
typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd,
|
||||
uint8_t epnum,
|
||||
HCD_URBStateTypeDef urb_state); /*!< pointer to USB OTG HCD host channel callback */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd,
|
||||
HAL_HCD_CallbackIDTypeDef CallbackID,
|
||||
pHCD_CallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd,
|
||||
HAL_HCD_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd,
|
||||
pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd);
|
||||
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* I/O operation functions ***************************************************/
|
||||
/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
|
||||
uint8_t direction, uint8_t ep_type,
|
||||
uint8_t token, uint8_t *pbuff,
|
||||
uint16_t length, uint8_t do_ping);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_WKUP_IRQHandler(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd);
|
||||
void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum,
|
||||
HCD_URBStateTypeDef urb_state);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
|
||||
HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
|
||||
HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral State functions ************************************************/
|
||||
/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
|
||||
HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
|
||||
HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
|
||||
uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
|
||||
uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
|
||||
uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup HCD_Private_Macros HCD Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private functions prototypes ----------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_HCD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,740 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_i2c.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_I2C_H
|
||||
#define __STM32F2xx_HAL_I2C_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Exported_Types I2C Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
|
||||
* @brief I2C Configuration Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t ClockSpeed; /*!< Specifies the clock frequency.
|
||||
This parameter must be set to a value lower than 400kHz */
|
||||
|
||||
uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
|
||||
This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
|
||||
|
||||
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
||||
This parameter can be a 7-bit or 10-bit address. */
|
||||
|
||||
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_addressing_mode */
|
||||
|
||||
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_dual_addressing_mode */
|
||||
|
||||
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
||||
This parameter can be a 7-bit address. */
|
||||
|
||||
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
||||
This parameter can be a value of @ref I2C_general_call_addressing_mode */
|
||||
|
||||
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
||||
This parameter can be a value of @ref I2C_nostretch_mode */
|
||||
|
||||
} I2C_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_state_structure_definition HAL state structure definition
|
||||
* @brief HAL State structure definition
|
||||
* @note HAL I2C State value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : Abort (Abort user request on going)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 Peripheral initialization status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
|
||||
* b4 (not used)
|
||||
* x : Should be set to 0
|
||||
* b3
|
||||
* 0 : Ready or Busy (No Listen mode ongoing)
|
||||
* 1 : Listen (Peripheral in Address Listen Mode)
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (Peripheral busy with some configuration or internal operations)
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
||||
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
||||
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
||||
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
||||
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
||||
|
||||
} HAL_I2C_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
|
||||
* @brief HAL Mode structure definition
|
||||
* @note HAL I2C Mode value coding follow below described bitmap :\n
|
||||
* b7 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b6\n
|
||||
* 0 : None\n
|
||||
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
|
||||
* b5\n
|
||||
* 0 : None\n
|
||||
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
|
||||
* b4\n
|
||||
* 0 : None\n
|
||||
* 1 : Master (HAL I2C communication is in Master Mode)\n
|
||||
* b3-b2-b1-b0 (not used)\n
|
||||
* xxxx : Should be set to 0000
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
||||
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
||||
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
||||
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
||||
|
||||
} HAL_I2C_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
|
||||
* @brief I2C Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_I2C_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_I2C_ERROR_BERR 0x00000001U /*!< BERR error */
|
||||
#define HAL_I2C_ERROR_ARLO 0x00000002U /*!< ARLO error */
|
||||
#define HAL_I2C_ERROR_AF 0x00000004U /*!< AF error */
|
||||
#define HAL_I2C_ERROR_OVR 0x00000008U /*!< OVR error */
|
||||
#define HAL_I2C_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#define HAL_I2C_ERROR_TIMEOUT 0x00000020U /*!< Timeout Error */
|
||||
#define HAL_I2C_ERROR_SIZE 0x00000040U /*!< Size Management error */
|
||||
#define HAL_I2C_ERROR_DMA_PARAM 0x00000080U /*!< DMA Parameter Error */
|
||||
#define HAL_I2C_WRONG_START 0x00000200U /*!< Wrong start Error */
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_I2C_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
|
||||
* @brief I2C handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __I2C_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
{
|
||||
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
||||
|
||||
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
||||
|
||||
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
||||
|
||||
uint16_t XferSize; /*!< I2C transfer size */
|
||||
|
||||
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
||||
|
||||
__IO uint32_t XferOptions; /*!< I2C transfer options */
|
||||
|
||||
__IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
|
||||
context for internal usage */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
||||
|
||||
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
||||
|
||||
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
||||
|
||||
__IO uint32_t Devaddress; /*!< I2C Target device address */
|
||||
|
||||
__IO uint32_t Memaddress; /*!< I2C Target memory address */
|
||||
|
||||
__IO uint32_t MemaddSize; /*!< I2C Target memory address size */
|
||||
|
||||
__IO uint32_t EventCount; /*!< I2C Event counter */
|
||||
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
|
||||
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
|
||||
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
|
||||
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
|
||||
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
|
||||
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
|
||||
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
|
||||
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
|
||||
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
|
||||
|
||||
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
|
||||
|
||||
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
} I2C_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL I2C Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
|
||||
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
|
||||
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
|
||||
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
|
||||
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
|
||||
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
|
||||
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
|
||||
|
||||
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
|
||||
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
|
||||
|
||||
} HAL_I2C_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL I2C Callback pointer definition
|
||||
*/
|
||||
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
|
||||
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUTYCYCLE_2 0x00000000U
|
||||
#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_addressing_mode I2C addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ADDRESSINGMODE_7BIT 0x00004000U
|
||||
#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUALADDRESS_DISABLE 0x00000000U
|
||||
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_GENERALCALL_DISABLE 0x00000000U
|
||||
#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_nostretch_mode I2C nostretch mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NOSTRETCH_DISABLE 0x00000000U
|
||||
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
|
||||
* @{
|
||||
*/
|
||||
#define I2C_MEMADD_SIZE_8BIT 0x00000001U
|
||||
#define I2C_MEMADD_SIZE_16BIT 0x00000010U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DIRECTION_RECEIVE 0x00000000U
|
||||
#define I2C_DIRECTION_TRANSMIT 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FIRST_FRAME 0x00000001U
|
||||
#define I2C_FIRST_AND_NEXT_FRAME 0x00000002U
|
||||
#define I2C_NEXT_FRAME 0x00000004U
|
||||
#define I2C_FIRST_AND_LAST_FRAME 0x00000008U
|
||||
#define I2C_LAST_FRAME_NO_STOP 0x00000010U
|
||||
#define I2C_LAST_FRAME 0x00000020U
|
||||
|
||||
/* List of XferOptions in usage of :
|
||||
* 1- Restart condition in all use cases (direction change or not)
|
||||
*/
|
||||
#define I2C_OTHER_FRAME (0x00AA0000U)
|
||||
#define I2C_OTHER_AND_LAST_FRAME (0xAA000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
||||
* @brief I2C Interrupt definition
|
||||
* Elements values convention: 0xXXXXXXXX
|
||||
* - XXXXXXXX : Interrupt control mask
|
||||
* @{
|
||||
*/
|
||||
#define I2C_IT_BUF I2C_CR2_ITBUFEN
|
||||
#define I2C_IT_EVT I2C_CR2_ITEVTEN
|
||||
#define I2C_IT_ERR I2C_CR2_ITERREN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Flag_definition I2C Flag definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define I2C_FLAG_OVR 0x00010800U
|
||||
#define I2C_FLAG_AF 0x00010400U
|
||||
#define I2C_FLAG_ARLO 0x00010200U
|
||||
#define I2C_FLAG_BERR 0x00010100U
|
||||
#define I2C_FLAG_TXE 0x00010080U
|
||||
#define I2C_FLAG_RXNE 0x00010040U
|
||||
#define I2C_FLAG_STOPF 0x00010010U
|
||||
#define I2C_FLAG_ADD10 0x00010008U
|
||||
#define I2C_FLAG_BTF 0x00010004U
|
||||
#define I2C_FLAG_ADDR 0x00010002U
|
||||
#define I2C_FLAG_SB 0x00010001U
|
||||
#define I2C_FLAG_DUALF 0x00100080U
|
||||
#define I2C_FLAG_GENCALL 0x00100010U
|
||||
#define I2C_FLAG_TRA 0x00100004U
|
||||
#define I2C_FLAG_BUSY 0x00100002U
|
||||
#define I2C_FLAG_MSL 0x00100001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset I2C handle state.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/** @brief Enable or disable the specified I2C interrupts.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable or disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_IT_BUF: Buffer interrupt enable
|
||||
* @arg I2C_IT_EVT: Event interrupt enable
|
||||
* @arg I2C_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))
|
||||
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_IT_BUF: Buffer interrupt enable
|
||||
* @arg I2C_IT_EVT: Event interrupt enable
|
||||
* @arg I2C_IT_ERR: Error interrupt enable
|
||||
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks whether the specified I2C flag is set or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_FLAG_OVR: Overrun/Underrun flag
|
||||
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
||||
* @arg I2C_FLAG_ARLO: Arbitration lost flag
|
||||
* @arg I2C_FLAG_BERR: Bus error flag
|
||||
* @arg I2C_FLAG_TXE: Data register empty flag
|
||||
* @arg I2C_FLAG_RXNE: Data register not empty flag
|
||||
* @arg I2C_FLAG_STOPF: Stop detection flag
|
||||
* @arg I2C_FLAG_ADD10: 10-bit header sent flag
|
||||
* @arg I2C_FLAG_BTF: Byte transfer finished flag
|
||||
* @arg I2C_FLAG_ADDR: Address sent flag
|
||||
* Address matched flag
|
||||
* @arg I2C_FLAG_SB: Start bit flag
|
||||
* @arg I2C_FLAG_DUALF: Dual flag
|
||||
* @arg I2C_FLAG_GENCALL: General call header flag
|
||||
* @arg I2C_FLAG_TRA: Transmitter/Receiver flag
|
||||
* @arg I2C_FLAG_BUSY: Bus busy flag
|
||||
* @arg I2C_FLAG_MSL: Master/Slave flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \
|
||||
(((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \
|
||||
(((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET))
|
||||
|
||||
/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
|
||||
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
||||
* @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
|
||||
* @arg I2C_FLAG_BERR: Bus error flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
|
||||
|
||||
/** @brief Clears the I2C ADDR pending flag.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR1; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR2; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Clears the I2C STOPF pending flag.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR1; \
|
||||
SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Enable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
|
||||
|
||||
/** @brief Disable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2C_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions******************************/
|
||||
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions ****************************************************/
|
||||
/******* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
|
||||
|
||||
/******* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
||||
|
||||
/******* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
||||
* @{
|
||||
*/
|
||||
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
||||
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State, Mode and Error functions *********************************/
|
||||
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
||||
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
||||
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Constants I2C Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FLAG_MASK 0x0000FFFFU
|
||||
#define I2C_MIN_PCLK_FREQ_STANDARD 2000000U /*!< 2 MHz */
|
||||
#define I2C_MIN_PCLK_FREQ_FAST 4000000U /*!< 4 MHz */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Macros I2C Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
|
||||
#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__) (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
|
||||
#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
|
||||
#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
|
||||
#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
|
||||
#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
|
||||
#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
|
||||
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
|
||||
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
|
||||
|
||||
#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0)))
|
||||
#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
|
||||
|
||||
#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
|
||||
#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0)))
|
||||
#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1))))
|
||||
|
||||
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8)))
|
||||
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
|
||||
|
||||
/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
|
||||
((CYCLE) == I2C_DUTYCYCLE_16_9))
|
||||
#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
|
||||
((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
|
||||
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
||||
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
||||
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
||||
((CALL) == I2C_GENERALCALL_ENABLE))
|
||||
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
||||
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
||||
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
||||
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
||||
#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U))
|
||||
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U)
|
||||
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U)
|
||||
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
|
||||
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
|
||||
|
||||
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
|
||||
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
|
||||
|
||||
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
|
||||
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Functions I2C Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F2xx_HAL_I2C_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,567 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_i2s.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2S HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_I2S_H
|
||||
#define STM32F2xx_HAL_I2S_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2S
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup I2S_Exported_Types I2S Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief I2S Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Specifies the I2S operating mode.
|
||||
This parameter can be a value of @ref I2S_Mode */
|
||||
|
||||
uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
|
||||
This parameter can be a value of @ref I2S_Standard */
|
||||
|
||||
uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
|
||||
This parameter can be a value of @ref I2S_Data_Format */
|
||||
|
||||
uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
|
||||
This parameter can be a value of @ref I2S_MCLK_Output */
|
||||
|
||||
uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
|
||||
This parameter can be a value of @ref I2S_Audio_Frequency */
|
||||
|
||||
uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
|
||||
This parameter can be a value of @ref I2S_Clock_Polarity */
|
||||
|
||||
uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
|
||||
This parameter can be a value of @ref I2S_Clock_Source */
|
||||
} I2S_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
|
||||
HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
|
||||
HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
|
||||
HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
|
||||
HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
|
||||
HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */
|
||||
HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */
|
||||
} HAL_I2S_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief I2S handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __I2S_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
{
|
||||
SPI_TypeDef *Instance; /*!< I2S registers base address */
|
||||
|
||||
I2S_InitTypeDef Init; /*!< I2S communication parameters */
|
||||
|
||||
uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
|
||||
|
||||
__IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
|
||||
|
||||
uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
|
||||
|
||||
__IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
|
||||
(This field is initialized at the
|
||||
same value as transfer size at the
|
||||
beginning of the transfer and
|
||||
decremented when a sample is received
|
||||
NbSamplesReceived = RxBufferSize-RxBufferCount) */
|
||||
DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
|
||||
|
||||
__IO HAL_LockTypeDef Lock; /*!< I2S locking object */
|
||||
|
||||
__IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< I2S Error code
|
||||
This parameter can be a value of @ref I2S_Error */
|
||||
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
|
||||
void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */
|
||||
void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */
|
||||
void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */
|
||||
void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */
|
||||
void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */
|
||||
void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
} I2S_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
|
||||
/**
|
||||
* @brief HAL I2S Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */
|
||||
HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */
|
||||
HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */
|
||||
HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */
|
||||
HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */
|
||||
HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */
|
||||
HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */
|
||||
|
||||
} HAL_I2S_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL I2S Callback pointer definition
|
||||
*/
|
||||
typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
|
||||
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup I2S_Exported_Constants I2S Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup I2S_Error I2S Error
|
||||
* @{
|
||||
*/
|
||||
#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */
|
||||
#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */
|
||||
#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */
|
||||
#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */
|
||||
#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
#define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Mode I2S Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2S_MODE_SLAVE_TX (0x00000000U)
|
||||
#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0)
|
||||
#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1)
|
||||
#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Standard I2S Standard
|
||||
* @{
|
||||
*/
|
||||
#define I2S_STANDARD_PHILIPS (0x00000000U)
|
||||
#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0)
|
||||
#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1)
|
||||
#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1))
|
||||
#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Data_Format I2S Data Format
|
||||
* @{
|
||||
*/
|
||||
#define I2S_DATAFORMAT_16B (0x00000000U)
|
||||
#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN)
|
||||
#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
|
||||
#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_MCLK_Output I2S MCLK Output
|
||||
* @{
|
||||
*/
|
||||
#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE)
|
||||
#define I2S_MCLKOUTPUT_DISABLE (0x00000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
|
||||
* @{
|
||||
*/
|
||||
#define I2S_AUDIOFREQ_192K (192000U)
|
||||
#define I2S_AUDIOFREQ_96K (96000U)
|
||||
#define I2S_AUDIOFREQ_48K (48000U)
|
||||
#define I2S_AUDIOFREQ_44K (44100U)
|
||||
#define I2S_AUDIOFREQ_32K (32000U)
|
||||
#define I2S_AUDIOFREQ_22K (22050U)
|
||||
#define I2S_AUDIOFREQ_16K (16000U)
|
||||
#define I2S_AUDIOFREQ_11K (11025U)
|
||||
#define I2S_AUDIOFREQ_8K (8000U)
|
||||
#define I2S_AUDIOFREQ_DEFAULT (2U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
|
||||
* @{
|
||||
*/
|
||||
#define I2S_CPOL_LOW (0x00000000U)
|
||||
#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
|
||||
* @{
|
||||
*/
|
||||
#define I2S_IT_TXE SPI_CR2_TXEIE
|
||||
#define I2S_IT_RXNE SPI_CR2_RXNEIE
|
||||
#define I2S_IT_ERR SPI_CR2_ERRIE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Flags_Definition I2S Flags Definition
|
||||
* @{
|
||||
*/
|
||||
#define I2S_FLAG_TXE SPI_SR_TXE
|
||||
#define I2S_FLAG_RXNE SPI_SR_RXNE
|
||||
|
||||
#define I2S_FLAG_UDR SPI_SR_UDR
|
||||
#define I2S_FLAG_OVR SPI_SR_OVR
|
||||
#define I2S_FLAG_FRE SPI_SR_FRE
|
||||
|
||||
#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
|
||||
#define I2S_FLAG_BSY SPI_SR_BSY
|
||||
|
||||
#define I2S_FLAG_MASK (SPI_SR_RXNE\
|
||||
| SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2S_Clock_Source I2S Clock Source
|
||||
* @{
|
||||
*/
|
||||
#define I2S_CLOCK_PLL 0x00000000U
|
||||
#define I2S_CLOCK_EXTERNAL 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup I2S_Exported_macros I2S Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset I2S handle state
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
|
||||
#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_I2S_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the specified SPI peripheral (in I2S mode).
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
|
||||
|
||||
/** @brief Disable the specified SPI peripheral (in I2S mode).
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
|
||||
|
||||
/** @brief Enable the specified I2S interrupts.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable or disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg I2S_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
|
||||
|
||||
/** @brief Disable the specified I2S interrupts.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable or disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg I2S_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
|
||||
|
||||
/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
|
||||
* @param __INTERRUPT__ specifies the I2S interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg I2S_IT_ERR: Error interrupt enable
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks whether the specified I2S flag is set or not.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg I2S_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg I2S_FLAG_UDR: Underrun flag
|
||||
* @arg I2S_FLAG_OVR: Overrun flag
|
||||
* @arg I2S_FLAG_FRE: Frame error flag
|
||||
* @arg I2S_FLAG_CHSIDE: Channel Side flag
|
||||
* @arg I2S_FLAG_BSY: Busy flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clears the I2S OVR pending flag.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
|
||||
__IO uint32_t tmpreg_ovr = 0x00U; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->DR; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->SR; \
|
||||
UNUSED(tmpreg_ovr); \
|
||||
}while(0U)
|
||||
/** @brief Clears the I2S UDR pending flag.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
|
||||
__IO uint32_t tmpreg_udr = 0x00U;\
|
||||
tmpreg_udr = ((__HANDLE__)->Instance->SR);\
|
||||
UNUSED(tmpreg_udr); \
|
||||
}while(0U)
|
||||
/** @brief Flush the I2S DR Register.
|
||||
* @param __HANDLE__ specifies the I2S Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\
|
||||
__IO uint32_t tmpreg_dr = 0x00U;\
|
||||
tmpreg_dr = ((__HANDLE__)->Instance->DR);\
|
||||
UNUSED(tmpreg_dr); \
|
||||
}while(0U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2S_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2S_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
|
||||
HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
|
||||
HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID,
|
||||
pI2S_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2S_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ***************************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||||
void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
|
||||
HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
|
||||
HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
|
||||
|
||||
/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
|
||||
void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
|
||||
void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2S_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control and State functions ************************************/
|
||||
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
|
||||
uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2S_Private_Macros I2S Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check whether the specified SPI flag is set or not.
|
||||
* @param __SR__ copy of I2S SR register.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg I2S_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg I2S_FLAG_UDR: Underrun error flag
|
||||
* @arg I2S_FLAG_OVR: Overrun flag
|
||||
* @arg I2S_FLAG_CHSIDE: Channel side flag
|
||||
* @arg I2S_FLAG_BSY: Busy flag
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\
|
||||
& ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified SPI Interrupt is set or not.
|
||||
* @param __CR2__ copy of I2S CR2 register.
|
||||
* @param __INTERRUPT__ specifies the SPI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2S_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg I2S_IT_ERR: Error interrupt enable
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks if I2S Mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the I2S Mode.
|
||||
* This parameter can be a value of @ref I2S_Mode
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
|
||||
((__MODE__) == I2S_MODE_SLAVE_RX) || \
|
||||
((__MODE__) == I2S_MODE_MASTER_TX) || \
|
||||
((__MODE__) == I2S_MODE_MASTER_RX))
|
||||
|
||||
#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \
|
||||
((__STANDARD__) == I2S_STANDARD_MSB) || \
|
||||
((__STANDARD__) == I2S_STANDARD_LSB) || \
|
||||
((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
|
||||
((__STANDARD__) == I2S_STANDARD_PCM_LONG))
|
||||
|
||||
#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \
|
||||
((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
|
||||
((__FORMAT__) == I2S_DATAFORMAT_24B) || \
|
||||
((__FORMAT__) == I2S_DATAFORMAT_32B))
|
||||
|
||||
#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
|
||||
((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
|
||||
|
||||
#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \
|
||||
((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \
|
||||
((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
|
||||
|
||||
/** @brief Checks if I2S Serial clock steady state parameter is in allowed range.
|
||||
* @param __CPOL__ specifies the I2S serial clock steady state.
|
||||
* This parameter can be a value of @ref I2S_Clock_Polarity
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
|
||||
((__CPOL__) == I2S_CPOL_HIGH))
|
||||
|
||||
#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
|
||||
((CLOCK) == I2S_CLOCK_PLL))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_I2S_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,684 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_irda.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of IRDA HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_IRDA_H
|
||||
#define __STM32F2xx_HAL_IRDA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup IRDA
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Exported_Types IRDA Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief IRDA Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
|
||||
The baud rate is computed using the following formula:
|
||||
- IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
|
||||
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
|
||||
|
||||
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
||||
This parameter can be a value of @ref IRDA_Word_Length */
|
||||
|
||||
uint32_t Parity; /*!< Specifies the parity mode.
|
||||
This parameter can be a value of @ref IRDA_Parity
|
||||
@note When parity is enabled, the computed parity is inserted
|
||||
at the MSB position of the transmitted data (9th bit when
|
||||
the word length is set to 9 data bits; 8th bit when the
|
||||
word length is set to 8 data bits). */
|
||||
|
||||
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
||||
This parameter can be a value of @ref IRDA_Mode */
|
||||
|
||||
uint8_t Prescaler; /*!< Specifies the Prescaler value to be programmed
|
||||
in the IrDA low-power Baud Register, for defining pulse width on which
|
||||
burst acceptance/rejection will be decided. This value is used as divisor
|
||||
of system clock to achieve required pulse width. */
|
||||
|
||||
uint32_t IrDAMode; /*!< Specifies the IrDA mode
|
||||
This parameter can be a value of @ref IRDA_Low_Power */
|
||||
} IRDA_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL IRDA State structures definition
|
||||
* @note HAL IRDA State value is a combination of 2 different substates: gState and RxState.
|
||||
* - gState contains IRDA state information related to global Handle management
|
||||
* and also information related to Tx operations.
|
||||
* gState value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : (Not Used)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 IP initialisation status
|
||||
* 0 : Reset (IP not initialized)
|
||||
* 1 : Init done (IP initialized. HAL IRDA Init function already called)
|
||||
* b4-b3 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (IP busy with some configuration or internal operations)
|
||||
* b1 (not used)
|
||||
* x : Should be set to 0
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* - RxState contains information related to Rx operations.
|
||||
* RxState value coding follow below described bitmap :
|
||||
* b7-b6 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b5 IP initialisation status
|
||||
* 0 : Reset (IP not initialized)
|
||||
* 1 : Init done (IP initialized)
|
||||
* b4-b2 (not used)
|
||||
* xxx : Should be set to 000
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 (not used)
|
||||
* x : Should be set to 0.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_IRDA_STATE_BUSY = 0x24U, /*!< An internal process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
|
||||
Value is allowed for RxState only */
|
||||
HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
|
||||
Not to be used for neither gState nor RxState.
|
||||
Value is result of combination (Or) between gState and RxState values */
|
||||
HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
|
||||
Value is allowed for gState only */
|
||||
HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error
|
||||
Value is allowed for gState only */
|
||||
} HAL_IRDA_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief IRDA handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __IRDA_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
{
|
||||
USART_TypeDef *Instance; /*!< USART registers base address */
|
||||
|
||||
IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management
|
||||
and also related to Tx operations.
|
||||
This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
|
||||
|
||||
__IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations.
|
||||
This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< IRDA Error code */
|
||||
|
||||
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
|
||||
void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */
|
||||
|
||||
void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */
|
||||
|
||||
void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */
|
||||
|
||||
void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */
|
||||
|
||||
void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */
|
||||
|
||||
void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */
|
||||
|
||||
void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */
|
||||
|
||||
void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */
|
||||
|
||||
|
||||
void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */
|
||||
|
||||
void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */
|
||||
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
|
||||
} IRDA_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL IRDA Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */
|
||||
HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */
|
||||
HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */
|
||||
HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */
|
||||
HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */
|
||||
HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */
|
||||
HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */
|
||||
HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */
|
||||
|
||||
HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */
|
||||
HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */
|
||||
|
||||
} HAL_IRDA_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL IRDA Callback pointer definition
|
||||
*/
|
||||
typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */
|
||||
|
||||
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Exported_Constants IRDA Exported constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup IRDA_Error_Code IRDA Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_IRDA_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_IRDA_ERROR_PE 0x00000001U /*!< Parity error */
|
||||
#define HAL_IRDA_ERROR_NE 0x00000002U /*!< Noise error */
|
||||
#define HAL_IRDA_ERROR_FE 0x00000004U /*!< Frame error */
|
||||
#define HAL_IRDA_ERROR_ORE 0x00000008U /*!< Overrun error */
|
||||
#define HAL_IRDA_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_IRDA_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Word_Length IRDA Word Length
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_WORDLENGTH_8B 0x00000000U
|
||||
#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Parity IRDA Parity
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_PARITY_NONE 0x00000000U
|
||||
#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
||||
#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Mode IRDA Transfer Mode
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
|
||||
#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
|
||||
#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Low_Power IRDA Low Power
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
|
||||
#define IRDA_POWERMODE_NORMAL 0x00000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Flags IRDA Flags
|
||||
* Elements values convention: 0xXXXX
|
||||
* - 0xXXXX : Flag mask in the SR register
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
||||
#define IRDA_FLAG_TC ((uint32_t)USART_SR_TC)
|
||||
#define IRDA_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
||||
#define IRDA_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
||||
#define IRDA_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
||||
#define IRDA_FLAG_NE ((uint32_t)USART_SR_NE)
|
||||
#define IRDA_FLAG_FE ((uint32_t)USART_SR_FE)
|
||||
#define IRDA_FLAG_PE ((uint32_t)USART_SR_PE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
|
||||
* Elements values convention: 0xY000XXXX
|
||||
* - XXXX : Interrupt mask in the XX register
|
||||
* - Y : Interrupt source register (2bits)
|
||||
* - 01: CR1 register
|
||||
* - 10: CR2 register
|
||||
* - 11: CR3 register
|
||||
* @{
|
||||
*/
|
||||
#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
|
||||
#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
|
||||
#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
|
||||
#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
|
||||
#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
|
||||
|
||||
#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
|
||||
|
||||
#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
|
||||
#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_EIE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset IRDA handle gstate & RxState
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1
|
||||
#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
|
||||
} while(0U)
|
||||
#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Flush the IRDA DR register
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
||||
|
||||
/** @brief Check whether the specified IRDA flag is set or not.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg IRDA_FLAG_TXE: Transmit data register empty flag
|
||||
* @arg IRDA_FLAG_TC: Transmission Complete flag
|
||||
* @arg IRDA_FLAG_RXNE: Receive data register not empty flag
|
||||
* @arg IRDA_FLAG_IDLE: Idle Line detection flag
|
||||
* @arg IRDA_FLAG_ORE: OverRun Error flag
|
||||
* @arg IRDA_FLAG_NE: Noise Error flag
|
||||
* @arg IRDA_FLAG_FE: Framing Error flag
|
||||
* @arg IRDA_FLAG_PE: Parity Error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the specified IRDA pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg IRDA_FLAG_TC: Transmission Complete flag.
|
||||
* @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
|
||||
*
|
||||
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
|
||||
* error) and IDLE (Idle line detected) flags are cleared by software
|
||||
* sequence: a read operation to USART_SR register followed by a read
|
||||
* operation to USART_DR register.
|
||||
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
||||
* @note TC flag can be also cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a write operation to USART_DR register.
|
||||
* @note TXE flag is cleared only by a write to the USART_DR register.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Clear the IRDA PE pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR; \
|
||||
tmpreg = (__HANDLE__)->Instance->DR; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the IRDA FE pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the IRDA NE pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the IRDA ORE pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the IRDA IDLE pending flag.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Enable the specified IRDA interrupt.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the IRDA interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg IRDA_IT_TC: Transmission complete interrupt
|
||||
* @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg IRDA_IT_IDLE: Idle line detection interrupt
|
||||
* @arg IRDA_IT_PE: Parity Error interrupt
|
||||
* @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
|
||||
/** @brief Disable the specified IRDA interrupt.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the IRDA interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg IRDA_IT_TC: Transmission complete interrupt
|
||||
* @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg IRDA_IT_IDLE: Idle line detection interrupt
|
||||
* @arg IRDA_IT_PE: Parity Error interrupt
|
||||
* @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
|
||||
|
||||
/** @brief Check whether the specified IRDA interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __IT__ specifies the IRDA interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg IRDA_IT_TC: Transmission complete interrupt
|
||||
* @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg IRDA_IT_IDLE: Idle line detection interrupt
|
||||
* @arg IRDA_IT_ERR: Error interrupt
|
||||
* @arg IRDA_IT_PE: Parity Error interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == IRDA_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == IRDA_CR2_REG_INDEX)? \
|
||||
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
|
||||
|
||||
/** @brief Macro to enable the IRDA's one bit sample method
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 |= USART_CR3_ONEBIT)
|
||||
|
||||
/** @brief Macro to disable the IRDA's one bit sample method
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
||||
|
||||
/** @brief Enable UART/USART associated to IRDA Handle
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
|
||||
|
||||
/** @brief Disable UART/USART associated to IRDA Handle
|
||||
* @param __HANDLE__ specifies the IRDA Handle.
|
||||
* IRDA Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IRDA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup IRDA_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup IRDA_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
|
||||
|
||||
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, pIRDA_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup IRDA_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda);
|
||||
HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda);
|
||||
|
||||
void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup IRDA_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions **************************************************/
|
||||
HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
|
||||
uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Private_Constants IRDA Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief IRDA interruptions flag mask
|
||||
*
|
||||
*/
|
||||
#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
|
||||
USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
|
||||
|
||||
#define IRDA_CR1_REG_INDEX 1U
|
||||
#define IRDA_CR2_REG_INDEX 2U
|
||||
#define IRDA_CR3_REG_INDEX 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Private_Macros IRDA Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
|
||||
((LENGTH) == IRDA_WORDLENGTH_9B))
|
||||
|
||||
#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
|
||||
((PARITY) == IRDA_PARITY_EVEN) || \
|
||||
((PARITY) == IRDA_PARITY_ODD))
|
||||
|
||||
#define IS_IRDA_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00000000U))
|
||||
|
||||
#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
|
||||
((MODE) == IRDA_POWERMODE_NORMAL))
|
||||
|
||||
#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201U)
|
||||
|
||||
#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
|
||||
|
||||
#define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100U)
|
||||
|
||||
#define IRDA_DIVFRAQ(_PCLK_, _BAUD_) ((((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
|
||||
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
|
||||
#define IRDA_BRR(_PCLK_, _BAUD_) (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \
|
||||
(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup IRDA_Private_Functions IRDA Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_IRDA_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,223 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_iwdg.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of IWDG HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_IWDG_H
|
||||
#define STM32F2xx_HAL_IWDG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG IWDG
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Types IWDG Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief IWDG Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
|
||||
This parameter can be a value of @ref IWDG_Prescaler */
|
||||
|
||||
uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
|
||||
|
||||
} IWDG_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief IWDG Handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
IWDG_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
IWDG_InitTypeDef Init; /*!< IWDG required parameters */
|
||||
} IWDG_HandleTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Prescaler IWDG Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */
|
||||
#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
|
||||
#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
|
||||
#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
|
||||
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
|
||||
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
|
||||
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the IWDG peripheral.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
|
||||
|
||||
/**
|
||||
* @brief Reload IWDG counter with value defined in the reload register
|
||||
* (write access to IWDG_PR and IWDG_RLR registers disabled).
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/Start functions ********************************************/
|
||||
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Private_Constants IWDG Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief IWDG Key Register BitMask
|
||||
*/
|
||||
#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
|
||||
#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
|
||||
#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
|
||||
#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Private_Macros IWDG Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable write access to IWDG_PR and IWDG_RLR registers.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
|
||||
|
||||
/**
|
||||
* @brief Disable write access to IWDG_PR and IWDG_RLR registers.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
|
||||
|
||||
/**
|
||||
* @brief Check IWDG prescaler value.
|
||||
* @param __PRESCALER__ IWDG prescaler value
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_8) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_16) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_32) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_64) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_128)|| \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_256))
|
||||
|
||||
/**
|
||||
* @brief Check IWDG reload value.
|
||||
* @param __RELOAD__ IWDG reload value
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_IWDG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,745 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_mmc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of MMC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_MMC_H
|
||||
#define STM32F2xx_HAL_MMC_H
|
||||
|
||||
#if defined(SDIO)
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_sdmmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup MMC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup MMC_Exported_Types MMC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */
|
||||
HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */
|
||||
HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */
|
||||
HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */
|
||||
HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */
|
||||
HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */
|
||||
HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfer State */
|
||||
HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */
|
||||
}HAL_MMC_StateTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef uint32_t HAL_MMC_CardStateTypeDef;
|
||||
|
||||
#define HAL_MMC_CARD_READY 0x00000001U /*!< Card state is ready */
|
||||
#define HAL_MMC_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
|
||||
#define HAL_MMC_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
|
||||
#define HAL_MMC_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
|
||||
#define HAL_MMC_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
|
||||
#define HAL_MMC_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
|
||||
#define HAL_MMC_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
|
||||
#define HAL_MMC_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
|
||||
#define HAL_MMC_CARD_ERROR 0x000000FFU /*!< Card response Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define MMC_InitTypeDef SDIO_InitTypeDef
|
||||
#define MMC_TypeDef SDIO_TypeDef
|
||||
|
||||
/**
|
||||
* @brief MMC Card Information Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t CardType; /*!< Specifies the card Type */
|
||||
|
||||
uint32_t Class; /*!< Specifies the class of the card class */
|
||||
|
||||
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
|
||||
|
||||
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
|
||||
|
||||
uint32_t BlockSize; /*!< Specifies one block size in bytes */
|
||||
|
||||
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
||||
|
||||
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
||||
|
||||
}HAL_MMC_CardInfoTypeDef;
|
||||
|
||||
/**
|
||||
* @brief MMC handle Structure definition
|
||||
*/
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
typedef struct __MMC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
|
||||
{
|
||||
MMC_TypeDef *Instance; /*!< MMC registers base address */
|
||||
|
||||
MMC_InitTypeDef Init; /*!< MMC required parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< MMC locking object */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */
|
||||
|
||||
uint32_t TxXferSize; /*!< MMC Tx Transfer size */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */
|
||||
|
||||
uint32_t RxXferSize; /*!< MMC Rx Transfer size */
|
||||
|
||||
__IO uint32_t Context; /*!< MMC transfer context */
|
||||
|
||||
__IO HAL_MMC_StateTypeDef State; /*!< MMC card State */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< MMC Card Error codes */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */
|
||||
|
||||
HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */
|
||||
|
||||
uint32_t CSD[4U]; /*!< MMC card specific data table */
|
||||
|
||||
uint32_t CID[4U]; /*!< MMC card identification number table */
|
||||
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
void (* TxCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
void (* RxCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
void (* ErrorCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
void (* AbortCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
|
||||
void (* MspInitCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
void (* MspDeInitCallback) (struct __MMC_HandleTypeDef *hmmc);
|
||||
#endif
|
||||
}MMC_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t CSDStruct; /*!< CSD structure */
|
||||
__IO uint8_t SysSpecVersion; /*!< System specification version */
|
||||
__IO uint8_t Reserved1; /*!< Reserved */
|
||||
__IO uint8_t TAAC; /*!< Data read access time 1 */
|
||||
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
|
||||
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
|
||||
__IO uint16_t CardComdClasses; /*!< Card command classes */
|
||||
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
|
||||
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
|
||||
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
|
||||
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
|
||||
__IO uint8_t DSRImpl; /*!< DSR implemented */
|
||||
__IO uint8_t Reserved2; /*!< Reserved */
|
||||
__IO uint32_t DeviceSize; /*!< Device Size */
|
||||
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
|
||||
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
|
||||
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
|
||||
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
|
||||
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
|
||||
__IO uint8_t EraseGrSize; /*!< Erase group size */
|
||||
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
|
||||
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
|
||||
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
|
||||
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
|
||||
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
|
||||
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
|
||||
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
|
||||
__IO uint8_t Reserved3; /*!< Reserved */
|
||||
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
|
||||
__IO uint8_t FileFormatGroup; /*!< File format group */
|
||||
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
|
||||
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
|
||||
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
|
||||
__IO uint8_t FileFormat; /*!< File format */
|
||||
__IO uint8_t ECC; /*!< ECC code */
|
||||
__IO uint8_t CSD_CRC; /*!< CSD CRC */
|
||||
__IO uint8_t Reserved4; /*!< Always 1 */
|
||||
|
||||
}HAL_MMC_CardCSDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
|
||||
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
|
||||
__IO uint32_t ProdName1; /*!< Product Name part1 */
|
||||
__IO uint8_t ProdName2; /*!< Product Name part2 */
|
||||
__IO uint8_t ProdRev; /*!< Product Revision */
|
||||
__IO uint32_t ProdSN; /*!< Product Serial Number */
|
||||
__IO uint8_t Reserved1; /*!< Reserved1 */
|
||||
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
|
||||
__IO uint8_t CID_CRC; /*!< CID CRC */
|
||||
__IO uint8_t Reserved2; /*!< Always 1 */
|
||||
|
||||
}HAL_MMC_CardCIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
/** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_MMC_TX_CPLT_CB_ID = 0x00U, /*!< MMC Tx Complete Callback ID */
|
||||
HAL_MMC_RX_CPLT_CB_ID = 0x01U, /*!< MMC Rx Complete Callback ID */
|
||||
HAL_MMC_ERROR_CB_ID = 0x02U, /*!< MMC Error Callback ID */
|
||||
HAL_MMC_ABORT_CB_ID = 0x03U, /*!< MMC Abort Callback ID */
|
||||
|
||||
HAL_MMC_MSP_INIT_CB_ID = 0x10U, /*!< MMC MspInit Callback ID */
|
||||
HAL_MMC_MSP_DEINIT_CB_ID = 0x11U /*!< MMC MspDeInit Callback ID */
|
||||
}HAL_MMC_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
typedef void (*pMMC_CallbackTypeDef) (MMC_HandleTypeDef *hmmc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup MMC_Exported_Constants Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define MMC_BLOCKSIZE 512U /*!< Block size is 512 bytes */
|
||||
|
||||
/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
||||
#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
|
||||
#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
||||
#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
|
||||
#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
||||
#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
||||
#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
||||
#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
|
||||
#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
|
||||
number of transferred bytes does not match the block length */
|
||||
#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
|
||||
#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
|
||||
#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
|
||||
#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
|
||||
command or if there was an attempt to access a locked card */
|
||||
#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
|
||||
#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
|
||||
#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
|
||||
#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
|
||||
#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
|
||||
#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
|
||||
#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
|
||||
#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
|
||||
#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
|
||||
#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
|
||||
#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
|
||||
of erase sequence command was received */
|
||||
#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
|
||||
#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
|
||||
#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
|
||||
#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
|
||||
#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
|
||||
#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
|
||||
#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
|
||||
#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
|
||||
#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
||||
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_MMC_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
|
||||
* @{
|
||||
*/
|
||||
#define MMC_CONTEXT_NONE 0x00000000U /*!< None */
|
||||
#define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
|
||||
#define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
|
||||
#define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
|
||||
#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
|
||||
#define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
|
||||
#define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief
|
||||
*/
|
||||
#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */
|
||||
#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */
|
||||
#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */
|
||||
#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */
|
||||
#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
|
||||
* @{
|
||||
*/
|
||||
#define MMC_LOW_CAPACITY_CARD 0x00000000U /*!< MMC Card Capacity <=2Gbytes */
|
||||
#define MMC_HIGH_CAPACITY_CARD 0x00000001U /*!< MMC Card Capacity >2Gbytes and <2Tbytes */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup MMC_Exported_macros MMC Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset MMC handle state.
|
||||
* @param __HANDLE__ : MMC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_MMC_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MMC_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enable the MMC device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the MMC device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the MMC device interrupt.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the MMC device interrupt.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified MMC flag is set or not.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __FLAG__: specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
|
||||
* @arg SDIO_FLAG_TXACT: Data transmit in progress
|
||||
* @arg SDIO_FLAG_RXACT: Data receive in progress
|
||||
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
|
||||
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
|
||||
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
|
||||
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
|
||||
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
|
||||
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
|
||||
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
|
||||
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
|
||||
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
||||
* @retval The new state of MMC FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the MMC's pending flags.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __FLAG__: specifies the flag to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified MMC interrupt has occurred or not.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval The new state of MMC IT (SET or RESET).
|
||||
*/
|
||||
#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the MMC's interrupt pending bits.
|
||||
* @param __HANDLE__: MMC Handle
|
||||
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup MMC_Exported_Functions MMC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
|
||||
HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
|
||||
HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
|
||||
void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
|
||||
void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
|
||||
/* Non-Blocking mode: IT */
|
||||
HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
|
||||
void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
|
||||
|
||||
/* Callback in non blocking modes (DMA) */
|
||||
void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
|
||||
void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
|
||||
void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
|
||||
void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
|
||||
|
||||
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
|
||||
/* MMC callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_MMC_RegisterCallback (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
|
||||
* @{
|
||||
*/
|
||||
HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
|
||||
HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
|
||||
HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
|
||||
HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
|
||||
* @{
|
||||
*/
|
||||
HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
|
||||
uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
|
||||
HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Types MMC Private Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Defines MMC Private Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Variables MMC Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Constants MMC Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Macros MMC Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions prototypes ----------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup MMC_Private_Functions MMC Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* SDIO */
|
||||
|
||||
#endif /* STM32F2xx_HAL_MMC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,381 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_nand.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of NAND HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_NAND_H
|
||||
#define STM32F2xx_HAL_NAND_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_fsmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup NAND
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup NAND_Exported_Types NAND Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL NAND State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */
|
||||
HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */
|
||||
HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */
|
||||
HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */
|
||||
} HAL_NAND_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief NAND Memory electronic signature Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
/*<! NAND memory electronic signature maker and device IDs */
|
||||
|
||||
uint8_t Maker_Id;
|
||||
|
||||
uint8_t Device_Id;
|
||||
|
||||
uint8_t Third_Id;
|
||||
|
||||
uint8_t Fourth_Id;
|
||||
} NAND_IDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief NAND Memory address Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint16_t Page; /*!< NAND memory Page address */
|
||||
|
||||
uint16_t Plane; /*!< NAND memory Zone address */
|
||||
|
||||
uint16_t Block; /*!< NAND memory Block address */
|
||||
|
||||
} NAND_AddressTypeDef;
|
||||
|
||||
/**
|
||||
* @brief NAND Memory info Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes
|
||||
for 8 bits addressing or words for 16 bits addressing */
|
||||
|
||||
uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes
|
||||
for 8 bits addressing or words for 16 bits addressing */
|
||||
|
||||
uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */
|
||||
|
||||
uint32_t BlockNbr; /*!< NAND memory number of total blocks */
|
||||
|
||||
uint32_t PlaneNbr; /*!< NAND memory number of planes */
|
||||
|
||||
uint32_t PlaneSize; /*!< NAND memory zone size measured in number of blocks */
|
||||
|
||||
FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This
|
||||
parameter is mandatory for some NAND parts after the read
|
||||
command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence.
|
||||
Example: Toshiba THTH58BYG3S0HBAI6.
|
||||
This parameter could be ENABLE or DISABLE
|
||||
Please check the Read Mode sequnece in the NAND device datasheet */
|
||||
} NAND_DeviceConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @brief NAND handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __NAND_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
|
||||
{
|
||||
FSMC_NAND_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FSMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< NAND locking object */
|
||||
|
||||
__IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
|
||||
|
||||
NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */
|
||||
|
||||
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp DeInit callback */
|
||||
void (* ItCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND IT callback */
|
||||
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
|
||||
} NAND_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL NAND Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_NAND_MSP_INIT_CB_ID = 0x00U, /*!< NAND MspInit Callback ID */
|
||||
HAL_NAND_MSP_DEINIT_CB_ID = 0x01U, /*!< NAND MspDeInit Callback ID */
|
||||
HAL_NAND_IT_CB_ID = 0x02U /*!< NAND IT Callback ID */
|
||||
} HAL_NAND_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL NAND Callback pointer definition
|
||||
*/
|
||||
typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand);
|
||||
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup NAND_Exported_Macros NAND Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset NAND handle state
|
||||
* @param __HANDLE__ specifies the NAND handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_NAND_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
|
||||
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup NAND_Exported_Functions NAND Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FSMC_NAND_PCC_TimingTypeDef *ComSpace_Timing,
|
||||
FSMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
|
||||
HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
|
||||
|
||||
HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig);
|
||||
|
||||
HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
|
||||
|
||||
void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
|
||||
void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
|
||||
void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
|
||||
void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
|
||||
|
||||
HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
|
||||
uint32_t NumPageToRead);
|
||||
HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
|
||||
uint32_t NumPageToWrite);
|
||||
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
|
||||
uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
|
||||
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
|
||||
uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
|
||||
|
||||
HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
|
||||
uint32_t NumPageToRead);
|
||||
HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
|
||||
uint32_t NumPageToWrite);
|
||||
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
|
||||
uint16_t *pBuffer, uint32_t NumSpareAreaToRead);
|
||||
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
|
||||
uint16_t *pBuffer, uint32_t NumSpareAreaTowrite);
|
||||
|
||||
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
|
||||
|
||||
uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
|
||||
|
||||
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
|
||||
/* NAND callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId,
|
||||
pNAND_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId);
|
||||
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* NAND Control functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
|
||||
HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
|
||||
HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* NAND State functions *******************************************************/
|
||||
HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
|
||||
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup NAND_Private_Constants NAND Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define NAND_DEVICE1 0x70000000UL
|
||||
#define NAND_DEVICE2 0x80000000UL
|
||||
#define NAND_WRITE_TIMEOUT 0x01000000UL
|
||||
|
||||
#define CMD_AREA (1UL<<16U) /* A16 = CLE high */
|
||||
#define ADDR_AREA (1UL<<17U) /* A17 = ALE high */
|
||||
|
||||
#define NAND_CMD_AREA_A ((uint8_t)0x00)
|
||||
#define NAND_CMD_AREA_B ((uint8_t)0x01)
|
||||
#define NAND_CMD_AREA_C ((uint8_t)0x50)
|
||||
#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
|
||||
|
||||
#define NAND_CMD_WRITE0 ((uint8_t)0x80)
|
||||
#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
|
||||
#define NAND_CMD_ERASE0 ((uint8_t)0x60)
|
||||
#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
|
||||
#define NAND_CMD_READID ((uint8_t)0x90)
|
||||
#define NAND_CMD_STATUS ((uint8_t)0x70)
|
||||
#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
|
||||
#define NAND_CMD_RESET ((uint8_t)0xFF)
|
||||
|
||||
/* NAND memory status */
|
||||
#define NAND_VALID_ADDRESS 0x00000100UL
|
||||
#define NAND_INVALID_ADDRESS 0x00000200UL
|
||||
#define NAND_TIMEOUT_ERROR 0x00000400UL
|
||||
#define NAND_BUSY 0x00000000UL
|
||||
#define NAND_ERROR 0x00000001UL
|
||||
#define NAND_READY 0x00000040UL
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup NAND_Private_Macros NAND Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief NAND memory address computation.
|
||||
* @param __ADDRESS__ NAND memory address.
|
||||
* @param __HANDLE__ NAND handle.
|
||||
* @retval NAND Raw address value
|
||||
*/
|
||||
#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
|
||||
(((__ADDRESS__)->Block + \
|
||||
(((__ADDRESS__)->Plane) * \
|
||||
((__HANDLE__)->Config.PlaneSize))) * \
|
||||
((__HANDLE__)->Config.BlockSize)))
|
||||
|
||||
/**
|
||||
* @brief NAND memory Column address computation.
|
||||
* @param __HANDLE__ NAND handle.
|
||||
* @retval NAND Raw address value
|
||||
*/
|
||||
#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize)
|
||||
|
||||
/**
|
||||
* @brief NAND memory address cycling.
|
||||
* @param __ADDRESS__ NAND memory address.
|
||||
* @retval NAND address cycling value.
|
||||
*/
|
||||
#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
|
||||
#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
|
||||
#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
|
||||
#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
|
||||
|
||||
/**
|
||||
* @brief NAND memory Columns cycling.
|
||||
* @param __ADDRESS__ NAND memory address.
|
||||
* @retval NAND Column address cycling value.
|
||||
*/
|
||||
#define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) & 0xFFU) /* 1st Column addressing cycle */
|
||||
#define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_NAND_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,327 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_nor.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of NOR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_NOR_H
|
||||
#define STM32F2xx_HAL_NOR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_fsmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup NOR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
/** @defgroup NOR_Exported_Types NOR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL SRAM State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */
|
||||
HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */
|
||||
HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */
|
||||
HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */
|
||||
HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */
|
||||
} HAL_NOR_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NOR Status typedef
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_NOR_STATUS_SUCCESS = 0U,
|
||||
HAL_NOR_STATUS_ONGOING,
|
||||
HAL_NOR_STATUS_ERROR,
|
||||
HAL_NOR_STATUS_TIMEOUT
|
||||
} HAL_NOR_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NOR ID typedef
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
|
||||
|
||||
uint16_t Device_Code1;
|
||||
|
||||
uint16_t Device_Code2;
|
||||
|
||||
uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory.
|
||||
These codes can be accessed by performing read operations with specific
|
||||
control signals and addresses set.They can also be accessed by issuing
|
||||
an Auto Select command */
|
||||
} NOR_IDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NOR CFI typedef
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
/*!< Defines the information stored in the memory's Common flash interface
|
||||
which contains a description of various electrical and timing parameters,
|
||||
density information and functions supported by the memory */
|
||||
|
||||
uint16_t CFI_1;
|
||||
|
||||
uint16_t CFI_2;
|
||||
|
||||
uint16_t CFI_3;
|
||||
|
||||
uint16_t CFI_4;
|
||||
} NOR_CFITypeDef;
|
||||
|
||||
/**
|
||||
* @brief NOR handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __NOR_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
|
||||
|
||||
{
|
||||
FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
|
||||
|
||||
FSMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< NOR locking object */
|
||||
|
||||
__IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
|
||||
|
||||
uint32_t CommandSet; /*!< NOR algorithm command set and control */
|
||||
|
||||
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */
|
||||
#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
|
||||
} NOR_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL NOR Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_NOR_MSP_INIT_CB_ID = 0x00U, /*!< NOR MspInit Callback ID */
|
||||
HAL_NOR_MSP_DEINIT_CB_ID = 0x01U /*!< NOR MspDeInit Callback ID */
|
||||
} HAL_NOR_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL NOR Callback pointer definition
|
||||
*/
|
||||
typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor);
|
||||
#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup NOR_Exported_Macros NOR Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset NOR handle state
|
||||
* @param __HANDLE__ specifies the NOR handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_NOR_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
|
||||
#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup NOR_Exported_Functions NOR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing,
|
||||
FSMC_NORSRAM_TimingTypeDef *ExtTiming);
|
||||
HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
|
||||
void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
|
||||
void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
|
||||
void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* I/O operation functions ***************************************************/
|
||||
HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
|
||||
HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
|
||||
HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
|
||||
HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
|
||||
|
||||
HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData,
|
||||
uint32_t uwBufferSize);
|
||||
HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData,
|
||||
uint32_t uwBufferSize);
|
||||
|
||||
HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
|
||||
HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
|
||||
HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
|
||||
|
||||
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
|
||||
/* NOR callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId,
|
||||
pNOR_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId);
|
||||
#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* NOR Control functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
|
||||
HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* NOR State functions ********************************************************/
|
||||
HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
|
||||
HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup NOR_Private_Constants NOR Private Constants
|
||||
* @{
|
||||
*/
|
||||
/* NOR device IDs addresses */
|
||||
#define MC_ADDRESS ((uint16_t)0x0000)
|
||||
#define DEVICE_CODE1_ADDR ((uint16_t)0x0001)
|
||||
#define DEVICE_CODE2_ADDR ((uint16_t)0x000E)
|
||||
#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
|
||||
|
||||
/* NOR CFI IDs addresses */
|
||||
#define CFI1_ADDRESS ((uint16_t)0x0061)
|
||||
#define CFI2_ADDRESS ((uint16_t)0x0062)
|
||||
#define CFI3_ADDRESS ((uint16_t)0x0063)
|
||||
#define CFI4_ADDRESS ((uint16_t)0x0064)
|
||||
|
||||
/* NOR operation wait timeout */
|
||||
#define NOR_TMEOUT ((uint16_t)0xFFFF)
|
||||
|
||||
/* NOR memory data width */
|
||||
#define NOR_MEMORY_8B ((uint8_t)0x00)
|
||||
#define NOR_MEMORY_16B ((uint8_t)0x01)
|
||||
|
||||
/* NOR memory device read/write start address */
|
||||
#define NOR_MEMORY_ADRESS1 (0x60000000U)
|
||||
#define NOR_MEMORY_ADRESS2 (0x64000000U)
|
||||
#define NOR_MEMORY_ADRESS3 (0x68000000U)
|
||||
#define NOR_MEMORY_ADRESS4 (0x6C000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup NOR_Private_Macros NOR Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief NOR memory address shifting.
|
||||
* @param __NOR_ADDRESS NOR base address
|
||||
* @param __NOR_MEMORY_WIDTH_ NOR memory width
|
||||
* @param __ADDRESS__ NOR memory address
|
||||
* @retval NOR shifted address value
|
||||
*/
|
||||
#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \
|
||||
((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \
|
||||
((uint32_t)((__NOR_ADDRESS) + (2U * (__ADDRESS__)))): \
|
||||
((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__)))))
|
||||
|
||||
/**
|
||||
* @brief NOR memory write data to specified address.
|
||||
* @param __ADDRESS__ NOR memory address
|
||||
* @param __DATA__ Data to write
|
||||
* @retval None
|
||||
*/
|
||||
#define NOR_WRITE(__ADDRESS__, __DATA__) do{ \
|
||||
(*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \
|
||||
__DSB(); \
|
||||
} while(0)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_NOR_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,282 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_pccard.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PCCARD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_PCCARD_H
|
||||
#define STM32F2xx_HAL_PCCARD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_fsmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCCARD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL PCCARD State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCCARD_STATE_RESET = 0x00U, /*!< PCCARD peripheral not yet initialized or disabled */
|
||||
HAL_PCCARD_STATE_READY = 0x01U, /*!< PCCARD peripheral ready */
|
||||
HAL_PCCARD_STATE_BUSY = 0x02U, /*!< PCCARD peripheral busy */
|
||||
HAL_PCCARD_STATE_ERROR = 0x04U /*!< PCCARD peripheral error */
|
||||
} HAL_PCCARD_StateTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCCARD_STATUS_SUCCESS = 0U,
|
||||
HAL_PCCARD_STATUS_ONGOING,
|
||||
HAL_PCCARD_STATUS_ERROR,
|
||||
HAL_PCCARD_STATUS_TIMEOUT
|
||||
} HAL_PCCARD_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC_PCCARD handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __PCCARD_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_PCCARD_REGISTER_CALLBACKS */
|
||||
{
|
||||
FSMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
|
||||
|
||||
FSMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
|
||||
|
||||
__IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< PCCARD Lock */
|
||||
|
||||
#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD Msp DeInit callback */
|
||||
void (* ItCallback)(struct __PCCARD_HandleTypeDef *hpccard); /*!< PCCARD IT callback */
|
||||
#endif
|
||||
} PCCARD_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL PCCARD Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCCARD_MSP_INIT_CB_ID = 0x00U, /*!< PCCARD MspInit Callback ID */
|
||||
HAL_PCCARD_MSP_DEINIT_CB_ID = 0x01U, /*!< PCCARD MspDeInit Callback ID */
|
||||
HAL_PCCARD_IT_CB_ID = 0x02U /*!< PCCARD IT Callback ID */
|
||||
} HAL_PCCARD_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL PCCARD Callback pointer definition
|
||||
*/
|
||||
typedef void (*pPCCARD_CallbackTypeDef)(PCCARD_HandleTypeDef *hpccard);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset PCCARD handle state
|
||||
* @param __HANDLE__ specifies the PCCARD handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_PCCARD_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PCCARD_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCCARD_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FSMC_NAND_PCC_TimingTypeDef *ComSpaceTiming,
|
||||
FSMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FSMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
|
||||
HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
|
||||
void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
|
||||
void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PCCARD_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
|
||||
HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress,
|
||||
uint8_t *pStatus);
|
||||
HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress,
|
||||
uint8_t *pStatus);
|
||||
HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
|
||||
HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard);
|
||||
void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
|
||||
void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
|
||||
|
||||
#if (USE_HAL_PCCARD_REGISTER_CALLBACKS == 1)
|
||||
/* PCCARD callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_PCCARD_RegisterCallback(PCCARD_HandleTypeDef *hpccard, HAL_PCCARD_CallbackIDTypeDef CallbackId,
|
||||
pPCCARD_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_PCCARD_UnRegisterCallback(PCCARD_HandleTypeDef *hpccard,
|
||||
HAL_PCCARD_CallbackIDTypeDef CallbackId);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PCCARD_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* PCCARD State functions *******************************************************/
|
||||
HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
|
||||
HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard);
|
||||
HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PCCARD_Private_Constants PCCARD Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define PCCARD_DEVICE_ADDRESS 0x90000000U
|
||||
#define PCCARD_ATTRIBUTE_SPACE_ADDRESS 0x98000000U /* Attribute space size to @0x9BFF FFFF */
|
||||
#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
|
||||
#define PCCARD_IO_SPACE_ADDRESS 0x9C000000U /* IO space size to @0x9FFF FFFF */
|
||||
#define PCCARD_IO_SPACE_PRIMARY_ADDR 0x9C0001F0U /* IO space size to @0x9FFF FFFF */
|
||||
|
||||
/* Flash-ATA registers description */
|
||||
#define ATA_DATA ((uint8_t)0x00) /* Data register */
|
||||
#define ATA_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */
|
||||
#define ATA_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */
|
||||
#define ATA_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */
|
||||
#define ATA_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */
|
||||
#define ATA_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */
|
||||
#define ATA_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */
|
||||
#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
|
||||
#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
|
||||
#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202) /* Card Configuration and Status Register */
|
||||
|
||||
/* Flash-ATA commands */
|
||||
#define ATA_READ_SECTOR_CMD ((uint8_t)0x20)
|
||||
#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30)
|
||||
#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0)
|
||||
#define ATA_IDENTIFY_CMD ((uint8_t)0xEC)
|
||||
|
||||
/* PC Card/Compact Flash status */
|
||||
#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60)
|
||||
#define PCCARD_BUSY ((uint8_t)0x80)
|
||||
#define PCCARD_PROGR ((uint8_t)0x01)
|
||||
#define PCCARD_READY ((uint8_t)0x40)
|
||||
|
||||
#define PCCARD_SECTOR_SIZE 255U /* In half words */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Compact Flash redefinition */
|
||||
#define HAL_CF_Init HAL_PCCARD_Init
|
||||
#define HAL_CF_DeInit HAL_PCCARD_DeInit
|
||||
#define HAL_CF_MspInit HAL_PCCARD_MspInit
|
||||
#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit
|
||||
|
||||
#define HAL_CF_Read_ID HAL_PCCARD_Read_ID
|
||||
#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector
|
||||
#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector
|
||||
#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector
|
||||
#define HAL_CF_Reset HAL_PCCARD_Reset
|
||||
#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler
|
||||
#define HAL_CF_ITCallback HAL_PCCARD_ITCallback
|
||||
|
||||
#define HAL_CF_GetState HAL_PCCARD_GetState
|
||||
#define HAL_CF_GetStatus HAL_PCCARD_GetStatus
|
||||
#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus
|
||||
|
||||
#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS
|
||||
#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING
|
||||
#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR
|
||||
#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
|
||||
#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef
|
||||
|
||||
#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS
|
||||
#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS
|
||||
#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS
|
||||
#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS
|
||||
#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR
|
||||
|
||||
#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR
|
||||
#define CF_BUSY PCCARD_BUSY
|
||||
#define CF_PROGR PCCARD_PROGR
|
||||
#define CF_READY PCCARD_READY
|
||||
|
||||
#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_PCCARD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,453 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_pcd.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PCD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_PCD_H
|
||||
#define STM32F2xx_HAL_PCD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_usb.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Types PCD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PCD State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCD_STATE_RESET = 0x00,
|
||||
HAL_PCD_STATE_READY = 0x01,
|
||||
HAL_PCD_STATE_ERROR = 0x02,
|
||||
HAL_PCD_STATE_BUSY = 0x03,
|
||||
HAL_PCD_STATE_TIMEOUT = 0x04
|
||||
} PCD_StateTypeDef;
|
||||
|
||||
/* Device LPM suspend state */
|
||||
typedef enum
|
||||
{
|
||||
LPM_L0 = 0x00, /* on */
|
||||
LPM_L1 = 0x01, /* LPM L1 sleep */
|
||||
LPM_L2 = 0x02, /* suspend */
|
||||
LPM_L3 = 0x03, /* off */
|
||||
} PCD_LPM_StateTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
PCD_LPM_L0_ACTIVE = 0x00, /* on */
|
||||
PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
|
||||
} PCD_LPM_MsgTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
PCD_BCD_ERROR = 0xFF,
|
||||
PCD_BCD_CONTACT_DETECTION = 0xFE,
|
||||
PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD,
|
||||
PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC,
|
||||
PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB,
|
||||
PCD_BCD_DISCOVERY_COMPLETED = 0x00,
|
||||
|
||||
} PCD_BCD_MsgTypeDef;
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
|
||||
typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
|
||||
typedef USB_OTG_EPTypeDef PCD_EPTypeDef;
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
/**
|
||||
* @brief PCD Handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
typedef struct __PCD_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
{
|
||||
PCD_TypeDef *Instance; /*!< Register base address */
|
||||
PCD_InitTypeDef Init; /*!< PCD required parameters */
|
||||
__IO uint8_t USB_Address; /*!< USB Address */
|
||||
PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */
|
||||
PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */
|
||||
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
|
||||
__IO PCD_StateTypeDef State; /*!< PCD communication state */
|
||||
__IO uint32_t ErrorCode; /*!< PCD Error code */
|
||||
uint32_t Setup[12]; /*!< Setup packet buffer */
|
||||
PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
|
||||
uint32_t BESL;
|
||||
|
||||
void *pData; /*!< Pointer to upper stack Handler */
|
||||
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */
|
||||
void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */
|
||||
void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */
|
||||
void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */
|
||||
void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */
|
||||
void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */
|
||||
void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */
|
||||
|
||||
void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */
|
||||
void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */
|
||||
void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */
|
||||
void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */
|
||||
|
||||
void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
} PCD_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PCD HAL Extended module */
|
||||
#include "stm32f2xx_hal_pcd_ex.h"
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Constants PCD Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_Speed PCD Speed
|
||||
* @{
|
||||
*/
|
||||
#define PCD_SPEED_HIGH USBD_HS_SPEED
|
||||
#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED
|
||||
#define PCD_SPEED_FULL USBD_FS_SPEED
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_PHY_Module PCD PHY Module
|
||||
* @{
|
||||
*/
|
||||
#define PCD_PHY_ULPI 1U
|
||||
#define PCD_PHY_EMBEDDED 2U
|
||||
#define PCD_PHY_UTMI 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PCD_Error_Code_definition PCD Error Code definition
|
||||
* @brief PCD Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup PCD_Exported_Macros PCD Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
|
||||
#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
|
||||
|
||||
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \
|
||||
((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
|
||||
#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
|
||||
|
||||
#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \
|
||||
*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK)
|
||||
|
||||
#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \
|
||||
*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
|
||||
|
||||
#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \
|
||||
((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
|
||||
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
|
||||
|
||||
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
|
||||
do { \
|
||||
EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \
|
||||
EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \
|
||||
} while(0U)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
|
||||
|
||||
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
|
||||
do { \
|
||||
EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
|
||||
EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
|
||||
} while(0U)
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PCD_Exported_Functions PCD Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||
/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
|
||||
* @brief HAL USB OTG PCD Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */
|
||||
HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */
|
||||
HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */
|
||||
HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */
|
||||
HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */
|
||||
HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */
|
||||
HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */
|
||||
|
||||
HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */
|
||||
HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */
|
||||
|
||||
} HAL_PCD_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
|
||||
* @brief HAL USB OTG PCD Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */
|
||||
typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */
|
||||
typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */
|
||||
typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
|
||||
typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd,
|
||||
HAL_PCD_CallbackIDTypeDef CallbackID,
|
||||
pPCD_CallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd,
|
||||
HAL_PCD_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd,
|
||||
pPCD_DataOutStageCallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd,
|
||||
pPCD_DataInStageCallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd,
|
||||
pPCD_IsoOutIncpltCallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd,
|
||||
pPCD_IsoInIncpltCallbackTypeDef pCallback);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* I/O operation functions ***************************************************/
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
|
||||
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
|
||||
uint16_t ep_mps, uint8_t ep_type);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
|
||||
uint8_t *pBuf, uint32_t len);
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
|
||||
uint8_t *pBuf, uint32_t len);
|
||||
|
||||
|
||||
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
|
||||
HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
|
||||
|
||||
uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral State functions ************************************************/
|
||||
/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PCD_Private_Constants PCD Private Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
|
||||
* @{
|
||||
*/
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */
|
||||
#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
#ifndef USB_OTG_DOEPINT_OTEPSPR
|
||||
#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */
|
||||
#endif /* defined USB_OTG_DOEPINT_OTEPSPR */
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_OTEPSPRM
|
||||
#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */
|
||||
#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */
|
||||
|
||||
#ifndef USB_OTG_DOEPINT_NAK
|
||||
#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */
|
||||
#endif /* defined USB_OTG_DOEPINT_NAK */
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_NAKM
|
||||
#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */
|
||||
#endif /* defined USB_OTG_DOEPMSK_NAKM */
|
||||
|
||||
#ifndef USB_OTG_DOEPINT_STPKTRX
|
||||
#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */
|
||||
#endif /* defined USB_OTG_DOEPINT_STPKTRX */
|
||||
|
||||
#ifndef USB_OTG_DOEPMSK_NYETM
|
||||
#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */
|
||||
#endif /* defined USB_OTG_DOEPMSK_NYETM */
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PCD_Private_Macros PCD Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_PCD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,82 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_pcd_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PCD HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_PCD_EX_H
|
||||
#define STM32F2xx_HAL_PCD_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PCDEx
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
|
||||
HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
|
||||
HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
|
||||
void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_PCD_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,425 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_PWR_H
|
||||
#define __STM32F2xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 0x00000100U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON 0x00000000U
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR_BRR
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received from the WKUP pin or from the RTC alarm (Alarm A
|
||||
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0)
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f2xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
||||
#define PWR_CR_OFFSET 0x00U
|
||||
#define PWR_CSR_OFFSET 0x04U
|
||||
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
||||
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of DBP bit */
|
||||
#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
|
||||
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of PVDE bit */
|
||||
#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
|
||||
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of EWUP bit */
|
||||
#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP)
|
||||
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F2xx_HAL_PWR_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,143 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_PWR_EX_H
|
||||
#define __STM32F2xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of FPDS bit */
|
||||
#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS)
|
||||
#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of BRE bit */
|
||||
#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE)
|
||||
#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F2xx_HAL_PWR_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,422 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_rcc_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RCC HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_RCC_EX_H
|
||||
#define __STM32F2xx_HAL_RCC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RCCEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief PLLI2S Clock structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
||||
This parameter must be a number between Min_Data = 192 and Max_Data = 432.
|
||||
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
||||
|
||||
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
||||
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
||||
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
||||
|
||||
}RCC_PLLI2SInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RCC extended clocks structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
||||
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
||||
|
||||
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
||||
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
||||
|
||||
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
|
||||
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
||||
|
||||
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
|
||||
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
||||
|
||||
}RCC_PeriphCLKInitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
|
||||
* @{
|
||||
*/
|
||||
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
|
||||
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000002)
|
||||
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000004)
|
||||
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000008)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection
|
||||
* @{
|
||||
*/
|
||||
#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
|
||||
#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup RCCEx_Exported_Macros RCC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
||||
* @brief Enables or disables the AHB1 peripheral clock.
|
||||
* @note After reset, the peripheral clock (used for registers read/write access)
|
||||
* is disabled and the application software has to enable this clock before
|
||||
* using it.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
|
||||
#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
|
||||
#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
|
||||
#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
|
||||
|
||||
/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
||||
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
||||
* @note After reset, the peripheral clock (used for registers read/write access)
|
||||
* is disabled and the application software has to enable this clock before
|
||||
* using it.
|
||||
* @{
|
||||
*/
|
||||
#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACEN))!= RESET)
|
||||
#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACTXEN))!= RESET)
|
||||
#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACRXEN))!= RESET)
|
||||
#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACPTPEN))!= RESET)
|
||||
#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
|
||||
__HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
|
||||
__HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
|
||||
#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACEN))== RESET)
|
||||
#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACTXEN))== RESET)
|
||||
#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACRXEN))== RESET)
|
||||
#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_ETHMACPTPEN))== RESET)
|
||||
#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
|
||||
__HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
|
||||
__HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ETHERNET clock.
|
||||
*/
|
||||
#define __HAL_RCC_ETH_CLK_ENABLE() do { \
|
||||
__HAL_RCC_ETHMAC_CLK_ENABLE(); \
|
||||
__HAL_RCC_ETHMACTX_CLK_ENABLE(); \
|
||||
__HAL_RCC_ETHMACRX_CLK_ENABLE(); \
|
||||
} while(0)
|
||||
/**
|
||||
* @brief Disable ETHERNET clock.
|
||||
*/
|
||||
#define __HAL_RCC_ETH_CLK_DISABLE() do { \
|
||||
__HAL_RCC_ETHMACTX_CLK_DISABLE(); \
|
||||
__HAL_RCC_ETHMACRX_CLK_DISABLE(); \
|
||||
__HAL_RCC_ETHMAC_CLK_DISABLE(); \
|
||||
} while(0)
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
||||
* @brief Enable or disable the AHB2 peripheral clock.
|
||||
* @note After reset, the peripheral clock (used for registers read/write access)
|
||||
* is disabled and the application software has to enable this clock before
|
||||
* using it.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
#if defined(STM32F215xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
#define __HAL_RCC_HASH_CLK_ENABLE() do { \
|
||||
__IO uint32_t tmpreg = 0x00; \
|
||||
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
|
||||
#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
|
||||
#endif /* STM32F215xx || STM32F217xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
||||
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
||||
* @note After reset, the peripheral clock (used for registers read/write access)
|
||||
* is disabled and the application software has to enable this clock before
|
||||
* using it.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_DCMIEN))!= RESET)
|
||||
#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_DCMIEN))== RESET)
|
||||
#endif /* defined(STM32F207xx) || defined(STM32F217xx) */
|
||||
#if defined(STM32F215xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_CRYPEN))!= RESET)
|
||||
#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_HASHEN))!= RESET)
|
||||
|
||||
#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_CRYPEN))== RESET)
|
||||
#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR &(RCC_AHB2ENR_HASHEN))== RESET)
|
||||
#endif /* defined(STM32F215xx) || defined(STM32F217xx) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
||||
* @brief Force or release AHB1 peripheral reset.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
|
||||
#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
||||
* @brief Force or release AHB2 peripheral reset.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
|
||||
#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
#if defined(STM32F215xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
|
||||
#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
|
||||
|
||||
#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
|
||||
#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
|
||||
#endif /* STM32F215xx || STM32F217xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
||||
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
||||
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
||||
* power consumption.
|
||||
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
||||
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
|
||||
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
|
||||
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
|
||||
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
|
||||
|
||||
#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
|
||||
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
|
||||
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
|
||||
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
||||
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
||||
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
||||
* power consumption.
|
||||
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
||||
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F207xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
|
||||
#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
|
||||
#endif /* STM32F207xx || STM32F217xx */
|
||||
|
||||
#if defined(STM32F215xx) || defined(STM32F217xx)
|
||||
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
|
||||
#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
|
||||
|
||||
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
|
||||
#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
|
||||
#endif /* STM32F215xx || STM32F217xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup RCCEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RCCEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
||||
void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
||||
|
||||
HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit);
|
||||
HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup RCCEx_Private_Constants RCC Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
|
||||
* @brief RCC registers bit address in the alias region
|
||||
* @{
|
||||
*/
|
||||
#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup RCCEx_Private_Macros RCC Private Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000000F))
|
||||
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
|
||||
#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_RCC_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,363 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_rng.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RNG HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_RNG_H
|
||||
#define STM32F2xx_HAL_RNG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (RNG)
|
||||
|
||||
/** @defgroup RNG RNG
|
||||
* @brief RNG HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types RNG Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */
|
||||
HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */
|
||||
HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */
|
||||
HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */
|
||||
HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */
|
||||
|
||||
} HAL_RNG_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __RNG_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
{
|
||||
RNG_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< RNG locking object */
|
||||
|
||||
__IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< RNG Error code */
|
||||
|
||||
uint32_t RandomNumber; /*!< Last Generated RNG Data */
|
||||
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */
|
||||
void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
} RNG_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL RNG Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */
|
||||
|
||||
HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */
|
||||
HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */
|
||||
|
||||
} HAL_RNG_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL RNG Callback pointer definition
|
||||
*/
|
||||
typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */
|
||||
typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */
|
||||
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Constants RNG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */
|
||||
#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */
|
||||
#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */
|
||||
#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */
|
||||
#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Error_Definition RNG Error Definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
|
||||
#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */
|
||||
#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */
|
||||
#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Macros RNG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset RNG handle state
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_RNG_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enables the RNG peripheral.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
|
||||
|
||||
/**
|
||||
* @brief Disables the RNG peripheral.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
|
||||
|
||||
/**
|
||||
* @brief Check the selected RNG flag status.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __FLAG__ RNG flag
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_FLAG_DRDY: Data ready
|
||||
* @arg RNG_FLAG_CECS: Clock error current status
|
||||
* @arg RNG_FLAG_SECS: Seed error current status
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clears the selected RNG flag status.
|
||||
* @param __HANDLE__ RNG handle
|
||||
* @param __FLAG__ RNG flag to clear
|
||||
* @note WARNING: This is a dummy macro for HAL code alignment,
|
||||
* flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */
|
||||
|
||||
/**
|
||||
* @brief Enables the RNG interrupts.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
|
||||
|
||||
/**
|
||||
* @brief Disables the RNG interrupts.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified RNG interrupt has occurred or not.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __INTERRUPT__ specifies the RNG interrupt status flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_IT_DRDY: Data ready interrupt
|
||||
* @arg RNG_IT_CEI: Clock error interrupt
|
||||
* @arg RNG_IT_SEI: Seed error interrupt
|
||||
* @retval The new state of __INTERRUPT__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the RNG interrupt status flags.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __INTERRUPT__ specifies the RNG interrupt status flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_IT_CEI: Clock error interrupt
|
||||
* @arg RNG_IT_SEI: Seed error interrupt
|
||||
* @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Functions RNG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
|
||||
HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
|
||||
pRNG_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng);
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef
|
||||
*hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
|
||||
uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef
|
||||
*hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
|
||||
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
|
||||
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
|
||||
uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
|
||||
|
||||
void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
|
||||
uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup RNG_Private_Macros RNG Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
|
||||
((IT) == RNG_IT_SEI))
|
||||
|
||||
#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
|
||||
((FLAG) == RNG_FLAG_CECS) || \
|
||||
((FLAG) == RNG_FLAG_SECS))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* RNG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_RNG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,801 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_rtc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RTC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_RTC_H
|
||||
#define __STM32F2xx_HAL_RTC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup RTC_Exported_Types RTC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
|
||||
HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
|
||||
HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
|
||||
HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
|
||||
HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
|
||||
|
||||
} HAL_RTCStateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RTC Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
|
||||
This parameter can be a value of @ref RTC_Hour_Formats */
|
||||
|
||||
uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
|
||||
|
||||
uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FFF */
|
||||
|
||||
uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
|
||||
This parameter can be a value of @ref RTC_Output_selection_Definitions */
|
||||
|
||||
uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
|
||||
This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
|
||||
|
||||
uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
|
||||
This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
|
||||
} RTC_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RTC Time structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Hours; /*!< Specifies the RTC Time Hour.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
|
||||
|
||||
uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
|
||||
|
||||
uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
|
||||
|
||||
uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
|
||||
This parameter can be a value of @ref RTC_AM_PM_Definitions */
|
||||
|
||||
uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
|
||||
|
||||
uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
|
||||
|
||||
} RTC_TimeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RTC Date structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
|
||||
This parameter can be a value of @ref RTC_WeekDay_Definitions */
|
||||
|
||||
uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
|
||||
This parameter can be a value of @ref RTC_Month_Date_Definitions */
|
||||
|
||||
uint8_t Date; /*!< Specifies the RTC Date.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
|
||||
|
||||
uint8_t Year; /*!< Specifies the RTC Date Year.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
|
||||
|
||||
} RTC_DateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RTC Alarm structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
|
||||
|
||||
uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
|
||||
This parameter can be a value of @ref RTC_AlarmMask_Definitions */
|
||||
|
||||
uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
|
||||
This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
|
||||
|
||||
uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
|
||||
If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
|
||||
If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
|
||||
|
||||
uint32_t Alarm; /*!< Specifies the alarm .
|
||||
This parameter can be a value of @ref RTC_Alarms_Definitions */
|
||||
} RTC_AlarmTypeDef;
|
||||
|
||||
/**
|
||||
* @brief RTC Handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __RTC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
|
||||
{
|
||||
RTC_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
RTC_InitTypeDef Init; /*!< RTC required parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< RTC locking object */
|
||||
|
||||
__IO HAL_RTCStateTypeDef State; /*!< Time communication state */
|
||||
|
||||
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
|
||||
void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */
|
||||
|
||||
void (* AlarmBEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm B Event callback */
|
||||
|
||||
void (* TimeStampEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC TimeStamp Event callback */
|
||||
|
||||
void (* WakeUpTimerEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC WakeUpTimer Event callback */
|
||||
|
||||
void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */
|
||||
|
||||
void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */
|
||||
|
||||
void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */
|
||||
|
||||
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
|
||||
|
||||
} RTC_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL RTC Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00u, /*!< RTC Alarm A Event Callback ID */
|
||||
HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01u, /*!< RTC Alarm B Event Callback ID */
|
||||
HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02u, /*!< RTC TimeStamp Event Callback ID */
|
||||
HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03u, /*!< RTC Wake-Up Timer Event Callback ID */
|
||||
HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04u, /*!< RTC Tamper 1 Callback ID */
|
||||
HAL_RTC_MSPINIT_CB_ID = 0x0Eu, /*!< RTC Msp Init callback ID */
|
||||
HAL_RTC_MSPDEINIT_CB_ID = 0x0Fu /*!< RTC Msp DeInit callback ID */
|
||||
} HAL_RTC_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL RTC Callback pointer definition
|
||||
*/
|
||||
typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */
|
||||
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RTC_Exported_Constants RTC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Hour_Formats RTC Hour Formats
|
||||
* @{
|
||||
*/
|
||||
#define RTC_HOURFORMAT_24 0x00000000U
|
||||
#define RTC_HOURFORMAT_12 0x00000040U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_OUTPUT_DISABLE 0x00000000U
|
||||
#define RTC_OUTPUT_ALARMA 0x00200000U
|
||||
#define RTC_OUTPUT_ALARMB 0x00400000U
|
||||
#define RTC_OUTPUT_WAKEUP 0x00600000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_OUTPUT_POLARITY_HIGH 0x00000000U
|
||||
#define RTC_OUTPUT_POLARITY_LOW 0x00100000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
|
||||
* @{
|
||||
*/
|
||||
#define RTC_OUTPUT_TYPE_OPENDRAIN 0x00000000U
|
||||
#define RTC_OUTPUT_TYPE_PUSHPULL 0x00040000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
|
||||
#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_DAYLIGHTSAVING_SUB1H 0x00020000U
|
||||
#define RTC_DAYLIGHTSAVING_ADD1H 0x00010000U
|
||||
#define RTC_DAYLIGHTSAVING_NONE 0x00000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_STOREOPERATION_RESET 0x00000000U
|
||||
#define RTC_STOREOPERATION_SET 0x00040000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_FORMAT_BIN 0x00000000U
|
||||
#define RTC_FORMAT_BCD 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
|
||||
* @{
|
||||
*/
|
||||
/* Coded in BCD format */
|
||||
#define RTC_MONTH_JANUARY ((uint8_t)0x01)
|
||||
#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
|
||||
#define RTC_MONTH_MARCH ((uint8_t)0x03)
|
||||
#define RTC_MONTH_APRIL ((uint8_t)0x04)
|
||||
#define RTC_MONTH_MAY ((uint8_t)0x05)
|
||||
#define RTC_MONTH_JUNE ((uint8_t)0x06)
|
||||
#define RTC_MONTH_JULY ((uint8_t)0x07)
|
||||
#define RTC_MONTH_AUGUST ((uint8_t)0x08)
|
||||
#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
|
||||
#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
|
||||
#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
|
||||
#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
|
||||
#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
|
||||
#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
|
||||
#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
|
||||
#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
|
||||
#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
|
||||
#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000U
|
||||
#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY 0x40000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_ALARMMASK_NONE 0x00000000U
|
||||
#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
|
||||
#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
|
||||
#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
|
||||
#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
|
||||
#define RTC_ALARMMASK_ALL 0x80808080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_ALARM_A RTC_CR_ALRAE
|
||||
#define RTC_ALARM_B RTC_CR_ALRBE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_IT_TS 0x00008000U
|
||||
#define RTC_IT_WUT 0x00004000U
|
||||
#define RTC_IT_ALRB 0x00002000U
|
||||
#define RTC_IT_ALRA 0x00001000U
|
||||
#define RTC_IT_TAMP 0x00000004U /* Used only to Enable the Tamper Interrupt */
|
||||
#define RTC_IT_TAMP1 0x00020000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_FLAG_TAMP1F 0x00002000U
|
||||
#define RTC_FLAG_TSOVF 0x00001000U
|
||||
#define RTC_FLAG_TSF 0x00000800U
|
||||
#define RTC_FLAG_WUTF 0x00000400U
|
||||
#define RTC_FLAG_ALRBF 0x00000200U
|
||||
#define RTC_FLAG_ALRAF 0x00000100U
|
||||
#define RTC_FLAG_INITF 0x00000040U
|
||||
#define RTC_FLAG_RSF 0x00000020U
|
||||
#define RTC_FLAG_INITS 0x00000010U
|
||||
#define RTC_FLAG_WUTWF 0x00000004U
|
||||
#define RTC_FLAG_ALRBWF 0x00000002U
|
||||
#define RTC_FLAG_ALRAWF 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup RTC_Exported_Macros RTC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset RTC handle state
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\
|
||||
(__HANDLE__)->State = HAL_RTC_STATE_RESET;\
|
||||
(__HANDLE__)->MspInitCallback = NULL;\
|
||||
(__HANDLE__)->MspDeInitCallback = NULL;\
|
||||
}while(0u)
|
||||
#else
|
||||
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
|
||||
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Disable the write protection for RTC registers.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Instance->WPR = 0xCAU; \
|
||||
(__HANDLE__)->Instance->WPR = 0x53U; \
|
||||
} while(0U)
|
||||
|
||||
/**
|
||||
* @brief Enable the write protection for RTC registers.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Instance->WPR = 0xFFU; \
|
||||
} while(0U)
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC ALARMA peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC ALARMA peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC ALARMB peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC ALARMB peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC Alarm interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg RTC_IT_ALRA: Alarm A interrupt
|
||||
* @arg RTC_IT_ALRB: Alarm B interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC Alarm interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg RTC_IT_ALRA: Alarm A interrupt
|
||||
* @arg RTC_IT_ALRB: Alarm B interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Alarm interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Alarm interrupt to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_ALRA: Alarm A interrupt
|
||||
* @arg RTC_IT_ALRB: Alarm B interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Get the selected RTC Alarm's flag status.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Alarm Flag to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_ALRAF
|
||||
* @arg RTC_FLAG_ALRBF
|
||||
* @arg RTC_FLAG_ALRAWF
|
||||
* @arg RTC_FLAG_ALRBWF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Alarm's pending flags.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_ALRAF
|
||||
* @arg RTC_FLAG_ALRBF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||||
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_ALRA: Alarm A interrupt
|
||||
* @arg RTC_IT_ALRB: Alarm B interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Enable interrupt on the RTC Alarm associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable interrupt on the RTC Alarm associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable event on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable event on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
|
||||
* @retval Line Status.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Alarm associated Exti line flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Generate a Software interrupt on RTC Alarm associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include RTC HAL Extension module */
|
||||
#include "stm32f2xx_hal_rtc_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup RTC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions ****************************/
|
||||
HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* RTC Time and Date functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
|
||||
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
|
||||
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
|
||||
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
|
||||
|
||||
/* RTC Daylight Saving Time functions *****************************************/
|
||||
void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc);
|
||||
uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* RTC Alarm functions ********************************************************/
|
||||
HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
|
||||
HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
|
||||
HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
|
||||
HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
|
||||
void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||||
void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTC_Exported_Functions_Group5
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions *************************************************/
|
||||
HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup RTC_Private_Constants RTC Private Constants
|
||||
* @{
|
||||
*/
|
||||
/* Masks Definition */
|
||||
#define RTC_TR_RESERVED_MASK 0x007F7F7FU
|
||||
#define RTC_DR_RESERVED_MASK 0x00FFFF3FU
|
||||
#define RTC_INIT_MASK 0xFFFFFFFFU
|
||||
#define RTC_RSF_MASK 0xFFFFFF5FU
|
||||
#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
|
||||
RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
|
||||
RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
|
||||
RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F))
|
||||
|
||||
#define RTC_TIMEOUT_VALUE 1000U
|
||||
|
||||
#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup RTC_Private_Macros RTC Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
|
||||
((FORMAT) == RTC_HOURFORMAT_24))
|
||||
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
|
||||
((OUTPUT) == RTC_OUTPUT_ALARMA) || \
|
||||
((OUTPUT) == RTC_OUTPUT_ALARMB) || \
|
||||
((OUTPUT) == RTC_OUTPUT_WAKEUP))
|
||||
#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
|
||||
((POL) == RTC_OUTPUT_POLARITY_LOW))
|
||||
#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
|
||||
((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
|
||||
#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0U) && ((HOUR) <= 12U))
|
||||
#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U)
|
||||
#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FU)
|
||||
#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x1FFFU)
|
||||
#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U)
|
||||
#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U)
|
||||
|
||||
#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
|
||||
#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
|
||||
((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
|
||||
((SAVE) == RTC_DAYLIGHTSAVING_NONE))
|
||||
#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
|
||||
((OPERATION) == RTC_STOREOPERATION_SET))
|
||||
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
|
||||
#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U)
|
||||
#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U))
|
||||
#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U))
|
||||
#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
|
||||
#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U))
|
||||
#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
|
||||
((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
|
||||
#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
|
||||
((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
|
||||
#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7FU) == (uint32_t)RESET)
|
||||
#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup RTC_Private_Functions RTC Private Functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc);
|
||||
uint8_t RTC_ByteToBcd2(uint8_t Value);
|
||||
uint8_t RTC_Bcd2ToByte(uint8_t Value);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_RTC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,790 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_rtc_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RTC HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_RTC_EX_H
|
||||
#define __STM32F2xx_HAL_RTC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RTCEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Exported_Types RTC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief RTC Tamper structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
||||
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
||||
|
||||
uint32_t PinSelection; /*!< Specifies the Tamper Pin.
|
||||
This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
|
||||
|
||||
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
||||
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
||||
} RTC_TamperTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Exported_Constants RTC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_BKP_DR0 0x00000000U
|
||||
#define RTC_BKP_DR1 0x00000001U
|
||||
#define RTC_BKP_DR2 0x00000002U
|
||||
#define RTC_BKP_DR3 0x00000003U
|
||||
#define RTC_BKP_DR4 0x00000004U
|
||||
#define RTC_BKP_DR5 0x00000005U
|
||||
#define RTC_BKP_DR6 0x00000006U
|
||||
#define RTC_BKP_DR7 0x00000007U
|
||||
#define RTC_BKP_DR8 0x00000008U
|
||||
#define RTC_BKP_DR9 0x00000009U
|
||||
#define RTC_BKP_DR10 0x0000000AU
|
||||
#define RTC_BKP_DR11 0x0000000BU
|
||||
#define RTC_BKP_DR12 0x0000000CU
|
||||
#define RTC_BKP_DR13 0x0000000DU
|
||||
#define RTC_BKP_DR14 0x0000000EU
|
||||
#define RTC_BKP_DR15 0x0000000FU
|
||||
#define RTC_BKP_DR16 0x00000010U
|
||||
#define RTC_BKP_DR17 0x00000011U
|
||||
#define RTC_BKP_DR18 0x00000012U
|
||||
#define RTC_BKP_DR19 0x00000013U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_TIMESTAMPEDGE_RISING 0x00000000U
|
||||
#define RTC_TIMESTAMPEDGE_FALLING 0x00000008U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
|
||||
* @{
|
||||
*/
|
||||
#define RTC_TAMPERPIN_DEFAULT 0x00000000U
|
||||
#define RTC_TAMPERPIN_POS1 0x00010000U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
|
||||
* @{
|
||||
*/
|
||||
#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U
|
||||
#define RTC_TIMESTAMPPIN_POS1 0x00020000U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U
|
||||
#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U
|
||||
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U
|
||||
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U
|
||||
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U
|
||||
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U
|
||||
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
|
||||
* @{
|
||||
*/
|
||||
#define RTC_CALIBSIGN_POSITIVE 0x00000000U
|
||||
#define RTC_CALIBSIGN_NEGATIVE 0x00000080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Exported_Macros RTC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* ---------------------------------WAKEUPTIMER---------------------------------*/
|
||||
/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC WakeUp Timer peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC Wake-up Timer peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC WakeUpTimer interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC WakeUpTimer interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Get the selected RTC WakeUpTimer's flag status.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC WakeUpTimer Flag to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_WUTF
|
||||
* @arg RTC_FLAG_WUTWF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Wake Up timer's pending flags.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_WUTF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||||
|
||||
/**
|
||||
* @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable event on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable event on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
|
||||
* @retval Line Status.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Wake-up Timer associated Exti line flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* ---------------------------------TIMESTAMP---------------------------------*/
|
||||
/** @defgroup RTCEx_Timestamp RTC Timestamp
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC TimeStamp peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC TimeStamp peripheral.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC TimeStamp interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TS: TimeStamp interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC TimeStamp interrupt.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TS: TimeStamp interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TS: TimeStamp interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TS: TimeStamp interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Get the selected RTC TimeStamp's flag status.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC TimeStamp flag to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_TSF
|
||||
* @arg RTC_FLAG_TSOVF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Time Stamp's pending flags.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_TSF
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* ---------------------------------TAMPER------------------------------------*/
|
||||
/** @defgroup RTCEx_Tamper RTC Tamper
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC Tamper1 input detection.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
|
||||
|
||||
/**
|
||||
* @brief Disable the RTC Tamper1 input detection.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TAMP1
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
|
||||
* This parameter can be:
|
||||
* @arg RTC_IT_TAMP: Tamper interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Get the selected RTC Tamper's flag status.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_TAMP1F
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Tamper's pending flags.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @param __FLAG__ specifies the RTC Tamper Flag to clear.
|
||||
* This parameter can be:
|
||||
* @arg RTC_FLAG_TAMP1F
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
|
||||
/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
||||
|
||||
/**
|
||||
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do{ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
|
||||
* @retval Line Status.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
|
||||
/**
|
||||
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* ------------------------------Calibration----------------------------------*/
|
||||
/** @defgroup RTCEx_Calibration RTC Calibration
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the Coarse calibration process.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
|
||||
|
||||
/**
|
||||
* @brief Disable the Coarse calibration process.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
|
||||
|
||||
/**
|
||||
* @brief Enable the RTC calibration output.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
||||
|
||||
/**
|
||||
* @brief Disable the calibration output.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
||||
|
||||
/**
|
||||
* @brief Enable the clock reference detection.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
||||
|
||||
/**
|
||||
* @brief Disable the clock reference detection.
|
||||
* @param __HANDLE__ specifies the RTC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Exported_Functions RTC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RTCEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* RTC TimeStamp and Tamper functions *****************************************/
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
||||
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
||||
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
|
||||
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
||||
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
||||
|
||||
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTCEx_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* RTC Wake-up functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
||||
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
||||
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
||||
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTCEx_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Extension Control functions ************************************************/
|
||||
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
||||
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
||||
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
|
||||
HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup RTCEx_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Extension RTC features functions *******************************************/
|
||||
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
||||
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Private_Constants RTC Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup RTCEx_Private_Macros RTC Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
|
||||
((BKP) == RTC_BKP_DR1) || \
|
||||
((BKP) == RTC_BKP_DR2) || \
|
||||
((BKP) == RTC_BKP_DR3) || \
|
||||
((BKP) == RTC_BKP_DR4) || \
|
||||
((BKP) == RTC_BKP_DR5) || \
|
||||
((BKP) == RTC_BKP_DR6) || \
|
||||
((BKP) == RTC_BKP_DR7) || \
|
||||
((BKP) == RTC_BKP_DR8) || \
|
||||
((BKP) == RTC_BKP_DR9) || \
|
||||
((BKP) == RTC_BKP_DR10) || \
|
||||
((BKP) == RTC_BKP_DR11) || \
|
||||
((BKP) == RTC_BKP_DR12) || \
|
||||
((BKP) == RTC_BKP_DR13) || \
|
||||
((BKP) == RTC_BKP_DR14) || \
|
||||
((BKP) == RTC_BKP_DR15) || \
|
||||
((BKP) == RTC_BKP_DR16) || \
|
||||
((BKP) == RTC_BKP_DR17) || \
|
||||
((BKP) == RTC_BKP_DR18) || \
|
||||
((BKP) == RTC_BKP_DR19))
|
||||
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
|
||||
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
|
||||
|
||||
#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
|
||||
((PIN) == RTC_TAMPERPIN_POS1))
|
||||
|
||||
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
|
||||
((PIN) == RTC_TIMESTAMPPIN_POS1))
|
||||
|
||||
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
||||
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE))
|
||||
|
||||
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
||||
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
||||
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
||||
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
||||
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
||||
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
||||
|
||||
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
|
||||
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
|
||||
((SIGN) == RTC_CALIBSIGN_NEGATIVE))
|
||||
|
||||
#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)
|
||||
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)~(RTC_TAFCR_TAMP1E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_RTC_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,761 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_sd.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_SD_H
|
||||
#define STM32F2xx_HAL_SD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(SDIO)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_sdmmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD SD
|
||||
* @brief SD HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Types SD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
|
||||
HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
|
||||
HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
|
||||
HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
|
||||
HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
|
||||
HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receiving State */
|
||||
HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfer State */
|
||||
HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
|
||||
}HAL_SD_StateTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
|
||||
* @{
|
||||
*/
|
||||
typedef uint32_t HAL_SD_CardStateTypeDef;
|
||||
|
||||
#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */
|
||||
#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
|
||||
#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
|
||||
#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
|
||||
#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
|
||||
#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
|
||||
#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
|
||||
#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
|
||||
#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define SD_InitTypeDef SDIO_InitTypeDef
|
||||
#define SD_TypeDef SDIO_TypeDef
|
||||
|
||||
/**
|
||||
* @brief SD Card Information Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t CardType; /*!< Specifies the card Type */
|
||||
|
||||
uint32_t CardVersion; /*!< Specifies the card version */
|
||||
|
||||
uint32_t Class; /*!< Specifies the class of the card class */
|
||||
|
||||
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
|
||||
|
||||
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
|
||||
|
||||
uint32_t BlockSize; /*!< Specifies one block size in bytes */
|
||||
|
||||
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
||||
|
||||
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
||||
|
||||
}HAL_SD_CardInfoTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SD handle Structure definition
|
||||
*/
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
typedef struct __SD_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
{
|
||||
SD_TypeDef *Instance; /*!< SD registers base address */
|
||||
|
||||
SD_InitTypeDef Init; /*!< SD required parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SD locking object */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
|
||||
|
||||
uint32_t TxXferSize; /*!< SD Tx Transfer size */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
|
||||
|
||||
uint32_t RxXferSize; /*!< SD Rx Transfer size */
|
||||
|
||||
__IO uint32_t Context; /*!< SD transfer context */
|
||||
|
||||
__IO HAL_SD_StateTypeDef State; /*!< SD card State */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< SD Card Error codes */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
|
||||
|
||||
HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
|
||||
|
||||
uint32_t CSD[4]; /*!< SD card specific data table */
|
||||
|
||||
uint32_t CID[4]; /*!< SD card identification number table */
|
||||
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
|
||||
void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
}SD_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t CSDStruct; /*!< CSD structure */
|
||||
__IO uint8_t SysSpecVersion; /*!< System specification version */
|
||||
__IO uint8_t Reserved1; /*!< Reserved */
|
||||
__IO uint8_t TAAC; /*!< Data read access time 1 */
|
||||
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
|
||||
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
|
||||
__IO uint16_t CardComdClasses; /*!< Card command classes */
|
||||
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
|
||||
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
|
||||
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
|
||||
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
|
||||
__IO uint8_t DSRImpl; /*!< DSR implemented */
|
||||
__IO uint8_t Reserved2; /*!< Reserved */
|
||||
__IO uint32_t DeviceSize; /*!< Device Size */
|
||||
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
|
||||
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
|
||||
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
|
||||
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
|
||||
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
|
||||
__IO uint8_t EraseGrSize; /*!< Erase group size */
|
||||
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
|
||||
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
|
||||
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
|
||||
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
|
||||
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
|
||||
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
|
||||
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
|
||||
__IO uint8_t Reserved3; /*!< Reserved */
|
||||
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
|
||||
__IO uint8_t FileFormatGroup; /*!< File format group */
|
||||
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
|
||||
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
|
||||
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
|
||||
__IO uint8_t FileFormat; /*!< File format */
|
||||
__IO uint8_t ECC; /*!< ECC code */
|
||||
__IO uint8_t CSD_CRC; /*!< CSD CRC */
|
||||
__IO uint8_t Reserved4; /*!< Always 1 */
|
||||
}HAL_SD_CardCSDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
|
||||
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
|
||||
__IO uint32_t ProdName1; /*!< Product Name part1 */
|
||||
__IO uint8_t ProdName2; /*!< Product Name part2 */
|
||||
__IO uint8_t ProdRev; /*!< Product Revision */
|
||||
__IO uint32_t ProdSN; /*!< Product Serial Number */
|
||||
__IO uint8_t Reserved1; /*!< Reserved1 */
|
||||
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
|
||||
__IO uint8_t CID_CRC; /*!< CID CRC */
|
||||
__IO uint8_t Reserved2; /*!< Always 1 */
|
||||
|
||||
}HAL_SD_CardCIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
|
||||
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
|
||||
__IO uint16_t CardType; /*!< Carries information about card type */
|
||||
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
|
||||
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
|
||||
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
|
||||
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
|
||||
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
|
||||
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
|
||||
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
|
||||
|
||||
}HAL_SD_CardStatusTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
|
||||
HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
|
||||
HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
|
||||
HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
|
||||
|
||||
HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
|
||||
HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
|
||||
}HAL_SD_CallbackIDTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
|
||||
* @{
|
||||
*/
|
||||
typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Constants Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
||||
#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
|
||||
#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
||||
#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
|
||||
#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
||||
#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
||||
#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
||||
#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
|
||||
#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
|
||||
number of transferred bytes does not match the block length */
|
||||
#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
|
||||
#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
|
||||
#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
|
||||
#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
|
||||
command or if there was an attempt to access a locked card */
|
||||
#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
|
||||
#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
|
||||
#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
|
||||
#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
|
||||
#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
|
||||
#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
|
||||
#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
|
||||
#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
|
||||
#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
|
||||
#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
|
||||
#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
|
||||
of erase sequence command was received */
|
||||
#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
|
||||
#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
|
||||
#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
|
||||
#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
|
||||
#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
|
||||
#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
|
||||
#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
|
||||
#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
|
||||
#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
||||
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
|
||||
* @{
|
||||
*/
|
||||
#define SD_CONTEXT_NONE 0x00000000U /*!< None */
|
||||
#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
|
||||
#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
|
||||
#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
|
||||
#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
|
||||
#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
|
||||
#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
|
||||
* @{
|
||||
*/
|
||||
#define CARD_SDSC 0x00000000U /*!< SD Standard Capacity <2Go */
|
||||
#define CARD_SDHC_SDXC 0x00000001U /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
|
||||
#define CARD_SECURED 0x00000003U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
|
||||
* @{
|
||||
*/
|
||||
#define CARD_V1_X 0x00000000U
|
||||
#define CARD_V2_X 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_macros SD Exported Macros
|
||||
* @brief macros to handle interrupts and specific clock configurations
|
||||
* @{
|
||||
*/
|
||||
/** @brief Reset SD handle state.
|
||||
* @param __HANDLE__ : SD handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SD_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enable the SD device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the SD device.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Disable the SDMMC DMA transfer.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
|
||||
|
||||
/**
|
||||
* @brief Enable the SD device interrupt.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the SD device interrupt.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified SD flag is set or not.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __FLAG__: specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
|
||||
* @arg SDIO_FLAG_TXACT: Data transmit in progress
|
||||
* @arg SDIO_FLAG_RXACT: Data receive in progress
|
||||
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
|
||||
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
|
||||
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
|
||||
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
|
||||
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
|
||||
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
|
||||
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
|
||||
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
|
||||
* @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
|
||||
* @retval The new state of SD FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the SD's pending flags.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __FLAG__: specifies the flag to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
||||
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
||||
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
||||
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
||||
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
||||
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
||||
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
||||
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
||||
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
|
||||
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
||||
* @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified SD interrupt has occurred or not.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
||||
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
||||
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
||||
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
||||
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
||||
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
||||
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
||||
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
||||
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
||||
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
|
||||
* @retval The new state of SD IT (SET or RESET).
|
||||
*/
|
||||
#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the SD's interrupt pending bits.
|
||||
* @param __HANDLE__: SD Handle
|
||||
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
|
||||
* This parameter can be one or a combination of the following values:
|
||||
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
||||
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
||||
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
||||
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
||||
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
||||
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
||||
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
||||
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
|
||||
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup SD_Exported_Functions SD Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
|
||||
/* Non-Blocking mode: IT */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
||||
|
||||
void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
|
||||
|
||||
/* Callback in non blocking modes (DMA) */
|
||||
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
|
||||
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
|
||||
|
||||
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
|
||||
/* SD callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId);
|
||||
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group4 SD card related functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
|
||||
HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
|
||||
HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
|
||||
* @{
|
||||
*/
|
||||
HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
|
||||
uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
|
||||
HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Types SD Private Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Defines SD Private Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Variables SD Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Constants SD Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Macros SD Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions prototypes ----------------------------------------------*/
|
||||
/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup SD_Private_Functions SD Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* SDIO */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_SD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,757 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_smartcard.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SMARTCARD HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_SMARTCARD_H
|
||||
#define __STM32F2xx_HAL_SMARTCARD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SMARTCARD
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief SMARTCARD Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
|
||||
The baud rate is computed using the following formula:
|
||||
- IntegerDivider = ((PCLKx) / (16 * (hsc->Init.BaudRate)))
|
||||
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
|
||||
|
||||
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
||||
This parameter can be a value of @ref SMARTCARD_Word_Length */
|
||||
|
||||
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
||||
This parameter can be a value of @ref SMARTCARD_Stop_Bits */
|
||||
|
||||
uint32_t Parity; /*!< Specifies the parity mode.
|
||||
This parameter can be a value of @ref SMARTCARD_Parity
|
||||
@note When parity is enabled, the computed parity is inserted
|
||||
at the MSB position of the transmitted data (9th bit when
|
||||
the word length is set to 9 data bits; 8th bit when the
|
||||
word length is set to 8 data bits).*/
|
||||
|
||||
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
||||
This parameter can be a value of @ref SMARTCARD_Mode */
|
||||
|
||||
uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
|
||||
This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
|
||||
|
||||
uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
|
||||
This parameter can be a value of @ref SMARTCARD_Clock_Phase */
|
||||
|
||||
uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
|
||||
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
|
||||
This parameter can be a value of @ref SMARTCARD_Last_Bit */
|
||||
|
||||
uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
|
||||
to provide the smartcard clock. The value given in the register (5 significant bits)
|
||||
is multiplied by 2 to give the division factor of the source clock frequency.
|
||||
This parameter can be a value of @ref SMARTCARD_Prescaler */
|
||||
|
||||
uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */
|
||||
|
||||
uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
|
||||
This parameter can be a value of @ref SMARTCARD_NACK_State */
|
||||
}SMARTCARD_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SMARTCARD State structures definition
|
||||
* @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
|
||||
* - gState contains SMARTCARD state information related to global Handle management
|
||||
* and also information related to Tx operations.
|
||||
* gState value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : (Not Used)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 IP initialization status
|
||||
* 0 : Reset (IP not initialized)
|
||||
* 1 : Init done (IP initialized. HAL SMARTCARD Init function already called)
|
||||
* b4-b3 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (IP busy with some configuration or internal operations)
|
||||
* b1 (not used)
|
||||
* x : Should be set to 0
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* - RxState contains information related to Rx operations.
|
||||
* RxState value coding follow below described bitmap :
|
||||
* b7-b6 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b5 IP initialization status
|
||||
* 0 : Reset (IP not initialized)
|
||||
* 1 : Init done (IP initialized)
|
||||
* b4-b2 (not used)
|
||||
* xxx : Should be set to 000
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 (not used)
|
||||
* x : Should be set to 0.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
|
||||
Value is allowed for RxState only */
|
||||
HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
|
||||
Not to be used for neither gState nor RxState.
|
||||
Value is result of combination (Or) between gState and RxState values */
|
||||
HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
|
||||
Value is allowed for gState only */
|
||||
HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
|
||||
Value is allowed for gState only */
|
||||
}HAL_SMARTCARD_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SMARTCARD handle Structure definition
|
||||
*/
|
||||
typedef struct __SMARTCARD_HandleTypeDef
|
||||
{
|
||||
USART_TypeDef *Instance; /*!< USART registers base address */
|
||||
|
||||
SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
|
||||
and also related to Tx operations.
|
||||
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
|
||||
|
||||
__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
|
||||
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< SmartCard Error code */
|
||||
|
||||
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
||||
void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Tx Complete Callback */
|
||||
|
||||
void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Rx Complete Callback */
|
||||
|
||||
void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Error Callback */
|
||||
|
||||
void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Complete Callback */
|
||||
|
||||
void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Transmit Complete Callback */
|
||||
|
||||
void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Receive Complete Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp Init callback */
|
||||
|
||||
void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp DeInit callback */
|
||||
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
||||
|
||||
} SMARTCARD_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL SMARTCARD Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */
|
||||
HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */
|
||||
HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */
|
||||
HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */
|
||||
HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */
|
||||
HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */
|
||||
|
||||
HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */
|
||||
HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */
|
||||
|
||||
} HAL_SMARTCARD_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SMARTCARD Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< pointer to an SMARTCARD callback function */
|
||||
|
||||
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_SMARTCARD_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_SMARTCARD_ERROR_PE 0x00000001U /*!< Parity error */
|
||||
#define HAL_SMARTCARD_ERROR_NE 0x00000002U /*!< Noise error */
|
||||
#define HAL_SMARTCARD_ERROR_FE 0x00000004U /*!< Frame error */
|
||||
#define HAL_SMARTCARD_ERROR_ORE 0x00000008U /*!< Overrun error */
|
||||
#define HAL_SMARTCARD_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
|
||||
#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Parity SMARTCARD Parity
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
||||
#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Mode SMARTCARD Mode
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
|
||||
#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
|
||||
#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_POLARITY_LOW 0x00000000U
|
||||
#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_PHASE_1EDGE 0x00000000U
|
||||
#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_LASTBIT_DISABLE 0x00000000U
|
||||
#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
|
||||
#define SMARTCARD_NACK_DISABLE 0x00000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
|
||||
#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV2 0x00000001U /*!< SYSCLK divided by 2 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV4 0x00000002U /*!< SYSCLK divided by 4 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV6 0x00000003U /*!< SYSCLK divided by 6 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV8 0x00000004U /*!< SYSCLK divided by 8 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV10 0x00000005U /*!< SYSCLK divided by 10 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV12 0x00000006U /*!< SYSCLK divided by 12 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV14 0x00000007U /*!< SYSCLK divided by 14 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV16 0x00000008U /*!< SYSCLK divided by 16 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV18 0x00000009U /*!< SYSCLK divided by 18 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV20 0x0000000AU /*!< SYSCLK divided by 20 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV22 0x0000000BU /*!< SYSCLK divided by 22 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV24 0x0000000CU /*!< SYSCLK divided by 24 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV26 0x0000000DU /*!< SYSCLK divided by 26 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV28 0x0000000EU /*!< SYSCLK divided by 28 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV30 0x0000000FU /*!< SYSCLK divided by 30 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV32 0x00000010U /*!< SYSCLK divided by 32 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV34 0x00000011U /*!< SYSCLK divided by 34 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV36 0x00000012U /*!< SYSCLK divided by 36 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV38 0x00000013U /*!< SYSCLK divided by 38 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV40 0x00000014U /*!< SYSCLK divided by 40 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV42 0x00000015U /*!< SYSCLK divided by 42 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV44 0x00000016U /*!< SYSCLK divided by 44 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV46 0x00000017U /*!< SYSCLK divided by 46 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV48 0x00000018U /*!< SYSCLK divided by 48 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV50 0x00000019U /*!< SYSCLK divided by 50 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV52 0x0000001AU /*!< SYSCLK divided by 52 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV54 0x0000001BU /*!< SYSCLK divided by 54 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV56 0x0000001CU /*!< SYSCLK divided by 56 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV58 0x0000001DU /*!< SYSCLK divided by 58 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV60 0x0000001EU /*!< SYSCLK divided by 60 */
|
||||
#define SMARTCARD_PRESCALER_SYSCLK_DIV62 0x0000001FU /*!< SYSCLK divided by 62 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SmartCard_Flags SMARTCARD Flags
|
||||
* Elements values convention: 0xXXXX
|
||||
* - 0xXXXX : Flag mask in the SR register
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
||||
#define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC)
|
||||
#define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
||||
#define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
||||
#define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
||||
#define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE)
|
||||
#define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE)
|
||||
#define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition
|
||||
* Elements values convention: 0xY000XXXX
|
||||
* - XXXX : Interrupt mask in the Y register
|
||||
* - Y : Interrupt source register (2bits)
|
||||
* - 01: CR1 register
|
||||
* - 11: CR3 register
|
||||
* @{
|
||||
*/
|
||||
#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
|
||||
#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
|
||||
#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
|
||||
#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
|
||||
#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
|
||||
#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SMARTCARD handle gstate & RxState
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
|
||||
#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
|
||||
} while(0U)
|
||||
#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Flush the Smartcard DR register
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
||||
|
||||
/** @brief Check whether the specified Smartcard flag is set or not.
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
|
||||
* @arg SMARTCARD_FLAG_TC: Transmission Complete flag
|
||||
* @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
|
||||
* @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
|
||||
* @arg SMARTCARD_FLAG_ORE: Overrun Error flag
|
||||
* @arg SMARTCARD_FLAG_NE: Noise Error flag
|
||||
* @arg SMARTCARD_FLAG_FE: Framing Error flag
|
||||
* @arg SMARTCARD_FLAG_PE: Parity Error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the specified Smartcard pending flags.
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
|
||||
* @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
|
||||
*
|
||||
* @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun
|
||||
* error) flags are cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a read operation to USART_DR register.
|
||||
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
||||
* @note TC flag can be also cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a write operation to USART_DR register.
|
||||
* @note TXE flag is cleared only by a write to the USART_DR register.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Clear the SMARTCARD PE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR; \
|
||||
tmpreg = (__HANDLE__)->Instance->DR; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the SMARTCARD FE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the SMARTCARD NE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the SMARTCARD ORE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the SMARTCARD IDLE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Enable the specified SmartCard interrupt.
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg SMARTCARD_IT_TC: Transmission complete interrupt
|
||||
* @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
|
||||
* @arg SMARTCARD_IT_PE: Parity Error interrupt
|
||||
* @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
|
||||
|
||||
/** @brief Disable the specified SmartCard interrupt.
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg SMARTCARD_IT_TC: Transmission complete interrupt
|
||||
* @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
|
||||
* @arg SMARTCARD_IT_PE: Parity Error interrupt
|
||||
* @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
|
||||
|
||||
/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the SmartCard Handle.
|
||||
* @param __IT__ specifies the SMARTCARD interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg SMARTCARD_IT_TC: Transmission complete interrupt
|
||||
* @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
|
||||
* @arg SMARTCARD_IT_ERR: Error interrupt
|
||||
* @arg SMARTCARD_IT_PE: Parity Error interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
|
||||
|
||||
/** @brief Macro to enable the SMARTCARD's one bit sample method
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
|
||||
|
||||
/** @brief Macro to disable the SMARTCARD's one bit sample method
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
||||
|
||||
/** @brief Enable the USART associated to the SMARTCARD Handle
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
||||
|
||||
/** @brief Disable the USART associated to the SMARTCARD Handle
|
||||
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
||||
* SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
||||
|
||||
/** @brief Macros to enable the SmartCard DMA request.
|
||||
* @param __HANDLE__ specifies the SmartCard Handle.
|
||||
* @param __REQUEST__ specifies the SmartCard DMA request.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
|
||||
* @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
|
||||
|
||||
/** @brief Macros to disable the SmartCard DMA request.
|
||||
* @param __HANDLE__ specifies the SmartCard Handle.
|
||||
* @param __REQUEST__ specifies the SmartCard DMA request.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
|
||||
* @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SMARTCARD_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SMARTCARD_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
|
||||
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SMARTCARD_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsc);
|
||||
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsc);
|
||||
|
||||
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SMARTCARD_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions **************************************************/
|
||||
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
|
||||
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief SMARTCARD interruptions flag mask
|
||||
*
|
||||
*/
|
||||
#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
|
||||
USART_CR1_IDLEIE | USART_CR3_EIE )
|
||||
|
||||
#define SMARTCARD_CR1_REG_INDEX 1U
|
||||
#define SMARTCARD_CR3_REG_INDEX 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
|
||||
#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
|
||||
((STOPBITS) == SMARTCARD_STOPBITS_1_5))
|
||||
#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
|
||||
((PARITY) == SMARTCARD_PARITY_ODD))
|
||||
#define IS_SMARTCARD_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x000000U))
|
||||
#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
|
||||
#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
|
||||
#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
|
||||
((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
|
||||
#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
|
||||
((NACK) == SMARTCARD_NACK_DISABLE))
|
||||
#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U)
|
||||
|
||||
#define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__)))
|
||||
#define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U)
|
||||
#define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) ((((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U) + 50U) / 100U)
|
||||
/* SMARTCARD BRR = mantissa + overflow + fraction
|
||||
= (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */
|
||||
#define SMARTCARD_BRR(__PCLK__, __BAUD__) (((SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) << 4U) + \
|
||||
(SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0xF0U)) + \
|
||||
(SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0FU))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_SMARTCARD_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,730 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_spi.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SPI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_SPI_H
|
||||
#define STM32F2xx_HAL_SPI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Types SPI Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief SPI Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Specifies the SPI operating mode.
|
||||
This parameter can be a value of @ref SPI_Mode */
|
||||
|
||||
uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
|
||||
This parameter can be a value of @ref SPI_Direction */
|
||||
|
||||
uint32_t DataSize; /*!< Specifies the SPI data size.
|
||||
This parameter can be a value of @ref SPI_Data_Size */
|
||||
|
||||
uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
|
||||
This parameter can be a value of @ref SPI_Clock_Polarity */
|
||||
|
||||
uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
|
||||
This parameter can be a value of @ref SPI_Clock_Phase */
|
||||
|
||||
uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
|
||||
hardware (NSS pin) or by software using the SSI bit.
|
||||
This parameter can be a value of @ref SPI_Slave_Select_management */
|
||||
|
||||
uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
|
||||
used to configure the transmit and receive SCK clock.
|
||||
This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
||||
@note The communication clock is derived from the master
|
||||
clock. The slave clock does not need to be set. */
|
||||
|
||||
uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
|
||||
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
|
||||
|
||||
uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
|
||||
This parameter can be a value of @ref SPI_TI_mode */
|
||||
|
||||
uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
|
||||
This parameter can be a value of @ref SPI_CRC_Calculation */
|
||||
|
||||
uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
|
||||
This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
|
||||
} SPI_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SPI State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
|
||||
HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
|
||||
HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */
|
||||
HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */
|
||||
} HAL_SPI_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SPI handle Structure definition
|
||||
*/
|
||||
typedef struct __SPI_HandleTypeDef
|
||||
{
|
||||
SPI_TypeDef *Instance; /*!< SPI registers base address */
|
||||
|
||||
SPI_InitTypeDef Init; /*!< SPI communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< SPI Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< SPI Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
|
||||
|
||||
void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */
|
||||
|
||||
void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< SPI Error code */
|
||||
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */
|
||||
void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */
|
||||
void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */
|
||||
void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */
|
||||
void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */
|
||||
void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */
|
||||
void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */
|
||||
void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */
|
||||
void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
} SPI_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
/**
|
||||
* @brief HAL SPI Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */
|
||||
HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */
|
||||
HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */
|
||||
HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */
|
||||
HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */
|
||||
HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */
|
||||
HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */
|
||||
HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */
|
||||
HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */
|
||||
HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */
|
||||
|
||||
} HAL_SPI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SPI Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
|
||||
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Constants SPI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Error_Code SPI Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */
|
||||
#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */
|
||||
#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */
|
||||
#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */
|
||||
#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
||||
#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY Flag */
|
||||
#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Mode SPI Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_MODE_SLAVE (0x00000000U)
|
||||
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Direction SPI Direction Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_DIRECTION_2LINES (0x00000000U)
|
||||
#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
|
||||
#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Data_Size SPI Data Size
|
||||
* @{
|
||||
*/
|
||||
#define SPI_DATASIZE_8BIT (0x00000000U)
|
||||
#define SPI_DATASIZE_16BIT SPI_CR1_DFF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
|
||||
* @{
|
||||
*/
|
||||
#define SPI_POLARITY_LOW (0x00000000U)
|
||||
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Clock_Phase SPI Clock Phase
|
||||
* @{
|
||||
*/
|
||||
#define SPI_PHASE_1EDGE (0x00000000U)
|
||||
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
|
||||
* @{
|
||||
*/
|
||||
#define SPI_NSS_SOFT SPI_CR1_SSM
|
||||
#define SPI_NSS_HARD_INPUT (0x00000000U)
|
||||
#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define SPI_BAUDRATEPRESCALER_2 (0x00000000U)
|
||||
#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1)
|
||||
#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2)
|
||||
#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1)
|
||||
#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
|
||||
* @{
|
||||
*/
|
||||
#define SPI_FIRSTBIT_MSB (0x00000000U)
|
||||
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_TI_mode SPI TI Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_TIMODE_DISABLE (0x00000000U)
|
||||
#define SPI_TIMODE_ENABLE SPI_CR2_FRF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
|
||||
* @{
|
||||
*/
|
||||
#define SPI_CRCCALCULATION_DISABLE (0x00000000U)
|
||||
#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
|
||||
* @{
|
||||
*/
|
||||
#define SPI_IT_TXE SPI_CR2_TXEIE
|
||||
#define SPI_IT_RXNE SPI_CR2_RXNEIE
|
||||
#define SPI_IT_ERR SPI_CR2_ERRIE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Flags_definition SPI Flags Definition
|
||||
* @{
|
||||
*/
|
||||
#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
|
||||
#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
|
||||
#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
|
||||
#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
|
||||
#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
|
||||
#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
|
||||
#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
|
||||
#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\
|
||||
| SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Macros SPI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SPI handle state.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_SPI_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the specified SPI interrupts.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the specified SPI interrupts.
|
||||
* @param __HANDLE__ specifies the SPI handle.
|
||||
* This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Check whether the specified SPI interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the SPI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified SPI flag is set or not.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg SPI_FLAG_CRCERR: CRC error flag
|
||||
* @arg SPI_FLAG_MODF: Mode fault flag
|
||||
* @arg SPI_FLAG_OVR: Overrun flag
|
||||
* @arg SPI_FLAG_BSY: Busy flag
|
||||
* @arg SPI_FLAG_FRE: Frame format error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the SPI CRCERR pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
|
||||
|
||||
/** @brief Clear the SPI MODF pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_modf = 0x00U; \
|
||||
tmpreg_modf = (__HANDLE__)->Instance->SR; \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
|
||||
UNUSED(tmpreg_modf); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the SPI OVR pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_ovr = 0x00U; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->DR; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->SR; \
|
||||
UNUSED(tmpreg_ovr); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the SPI FRE pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_fre = 0x00U; \
|
||||
tmpreg_fre = (__HANDLE__)->Instance->SR; \
|
||||
UNUSED(tmpreg_fre); \
|
||||
}while(0U)
|
||||
|
||||
/** @brief Enable the SPI peripheral.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
||||
|
||||
/** @brief Disable the SPI peripheral.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup SPI_Private_Macros SPI Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Set the SPI transmit-only mode.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
||||
|
||||
/** @brief Set the SPI receive-only mode.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
||||
|
||||
/** @brief Reset the CRC calculation of the SPI.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
|
||||
SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
|
||||
|
||||
/** @brief Check whether the specified SPI flag is set or not.
|
||||
* @param __SR__ copy of SPI SR register.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg SPI_FLAG_CRCERR: CRC error flag
|
||||
* @arg SPI_FLAG_MODF: Mode fault flag
|
||||
* @arg SPI_FLAG_OVR: Overrun flag
|
||||
* @arg SPI_FLAG_BSY: Busy flag
|
||||
* @arg SPI_FLAG_FRE: Frame format error flag
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \
|
||||
((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified SPI Interrupt is set or not.
|
||||
* @param __CR2__ copy of SPI CR2 register.
|
||||
* @param __INTERRUPT__ specifies the SPI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \
|
||||
(__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks if SPI Mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI Mode.
|
||||
* This parameter can be a value of @ref SPI_Mode
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
|
||||
((__MODE__) == SPI_MODE_MASTER))
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* This parameter can be a value of @ref SPI_Direction
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
||||
((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
|
||||
((__MODE__) == SPI_DIRECTION_1LINE))
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is 2 lines.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
||||
((__MODE__) == SPI_DIRECTION_1LINE))
|
||||
|
||||
/** @brief Checks if SPI Data Size parameter is in allowed range.
|
||||
* @param __DATASIZE__ specifies the SPI Data Size.
|
||||
* This parameter can be a value of @ref SPI_Data_Size
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
|
||||
((__DATASIZE__) == SPI_DATASIZE_8BIT))
|
||||
|
||||
/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
|
||||
* @param __CPOL__ specifies the SPI serial clock steady state.
|
||||
* This parameter can be a value of @ref SPI_Clock_Polarity
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
|
||||
((__CPOL__) == SPI_POLARITY_HIGH))
|
||||
|
||||
/** @brief Checks if SPI Clock Phase parameter is in allowed range.
|
||||
* @param __CPHA__ specifies the SPI Clock Phase.
|
||||
* This parameter can be a value of @ref SPI_Clock_Phase
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
|
||||
((__CPHA__) == SPI_PHASE_2EDGE))
|
||||
|
||||
/** @brief Checks if SPI Slave Select parameter is in allowed range.
|
||||
* @param __NSS__ specifies the SPI Slave Select management parameter.
|
||||
* This parameter can be a value of @ref SPI_Slave_Select_management
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
|
||||
((__NSS__) == SPI_NSS_HARD_INPUT) || \
|
||||
((__NSS__) == SPI_NSS_HARD_OUTPUT))
|
||||
|
||||
/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
|
||||
* @param __PRESCALER__ specifies the SPI Baudrate prescaler.
|
||||
* This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
|
||||
|
||||
/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
|
||||
* @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
|
||||
* This parameter can be a value of @ref SPI_MSB_LSB_transmission
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
|
||||
((__BIT__) == SPI_FIRSTBIT_LSB))
|
||||
|
||||
/** @brief Checks if SPI TI mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI TI mode.
|
||||
* This parameter can be a value of @ref SPI_TI_mode
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
|
||||
((__MODE__) == SPI_TIMODE_ENABLE))
|
||||
|
||||
/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
|
||||
* @param __CALCULATION__ specifies the SPI CRC calculation enable state.
|
||||
* This parameter can be a value of @ref SPI_CRC_Calculation
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
|
||||
((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
|
||||
|
||||
/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
|
||||
* @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
|
||||
* This parameter must be a number between Min_Data = 0 and Max_Data = 65535
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \
|
||||
((__POLYNOMIAL__) <= 0xFFFFU) && \
|
||||
(((__POLYNOMIAL__)&0x1U) != 0U))
|
||||
|
||||
/** @brief Checks if DMA handle is valid.
|
||||
* @param __HANDLE__ specifies a DMA Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SPI_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ***************************************************/
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
|
||||
|
||||
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
|
||||
uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_SPI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,233 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_sram.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SRAM HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_SRAM_H
|
||||
#define STM32F2xx_HAL_SRAM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_ll_fsmc.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup SRAM
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SRAM_Exported_Types SRAM Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief HAL SRAM State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */
|
||||
HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */
|
||||
HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */
|
||||
HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */
|
||||
HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */
|
||||
|
||||
} HAL_SRAM_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SRAM handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __SRAM_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
{
|
||||
FSMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FSMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
|
||||
|
||||
FSMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SRAM locking object */
|
||||
|
||||
__IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
|
||||
|
||||
DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
|
||||
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */
|
||||
void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Complete callback */
|
||||
void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Error callback */
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
} SRAM_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL SRAM Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */
|
||||
HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */
|
||||
HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */
|
||||
HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */
|
||||
} HAL_SRAM_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SRAM Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram);
|
||||
typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SRAM handle state
|
||||
* @param __HANDLE__ SRAM handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SRAM_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing,
|
||||
FSMC_NORSRAM_TimingTypeDef *ExtTiming);
|
||||
HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
|
||||
void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
|
||||
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* I/O operation functions ***************************************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
|
||||
void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
|
||||
void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
|
||||
|
||||
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
|
||||
/* SRAM callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId,
|
||||
pSRAM_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId);
|
||||
HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId,
|
||||
pSRAM_DmaCallbackTypeDef pCallback);
|
||||
#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group3 Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* SRAM Control functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
|
||||
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* SRAM State functions ******************************************************/
|
||||
HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_SRAM_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,284 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_tim_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of TIM HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_TIM_EX_H
|
||||
#define STM32F2xx_HAL_TIM_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief TIM Hall sensor Configuration Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
||||
|
||||
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
||||
|
||||
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
||||
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
||||
|
||||
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
||||
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
} TIM_HallSensor_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported types -----------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
||||
* @{
|
||||
*/
|
||||
#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */
|
||||
#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */
|
||||
#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */
|
||||
#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */
|
||||
|
||||
#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */
|
||||
#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */
|
||||
#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */
|
||||
#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */
|
||||
|
||||
#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */
|
||||
#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported constants -------------------------------------------------*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported macro -----------------------------------------------------*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macro ------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
||||
* @brief Timer Hall Sensor functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Hall Sensor functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
||||
* @brief Timer Complementary Output Compare functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary Output Compare functions *****************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
||||
* @brief Timer Complementary PWM functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary PWM functions ****************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
||||
* @brief Timer Complementary One Pulse functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary One Pulse functions **********************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
||||
* @brief Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
||||
TIM_MasterConfigTypeDef *sMasterConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
|
||||
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
||||
* @brief Extended Callbacks functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Callback **********************************************************/
|
||||
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
||||
* @brief Extended Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Peripheral State functions ***************************************/
|
||||
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
||||
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported functions -------------------------------------------------*/
|
||||
|
||||
/* Private functions----------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
|
||||
* @{
|
||||
*/
|
||||
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
||||
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private functions --------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F2xx_HAL_TIM_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,881 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_uart.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UART HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_UART_H
|
||||
#define __STM32F2xx_HAL_UART_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UART
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Types UART Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief UART Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
|
||||
The baud rate is computed using the following formula:
|
||||
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
|
||||
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
|
||||
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
|
||||
|
||||
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
||||
This parameter can be a value of @ref UART_Word_Length */
|
||||
|
||||
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
||||
This parameter can be a value of @ref UART_Stop_Bits */
|
||||
|
||||
uint32_t Parity; /*!< Specifies the parity mode.
|
||||
This parameter can be a value of @ref UART_Parity
|
||||
@note When parity is enabled, the computed parity is inserted
|
||||
at the MSB position of the transmitted data (9th bit when
|
||||
the word length is set to 9 data bits; 8th bit when the
|
||||
word length is set to 8 data bits). */
|
||||
|
||||
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
||||
This parameter can be a value of @ref UART_Mode */
|
||||
|
||||
uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
|
||||
This parameter can be a value of @ref UART_Hardware_Flow_Control */
|
||||
|
||||
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
|
||||
This parameter can be a value of @ref UART_Over_Sampling */
|
||||
} UART_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL UART State structures definition
|
||||
* @note HAL UART State value is a combination of 2 different substates: gState and RxState.
|
||||
* - gState contains UART state information related to global Handle management
|
||||
* and also information related to Tx operations.
|
||||
* gState value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : (Not Used)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 Peripheral initialization status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral initialized. HAL UART Init function already called)
|
||||
* b4-b3 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (Peripheral busy with some configuration or internal operations)
|
||||
* b1 (not used)
|
||||
* x : Should be set to 0
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* - RxState contains information related to Rx operations.
|
||||
* RxState value coding follow below described bitmap :
|
||||
* b7-b6 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b5 Peripheral initialization status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral initialized)
|
||||
* b4-b2 (not used)
|
||||
* xxx : Should be set to 000
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 (not used)
|
||||
* x : Should be set to 0.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
|
||||
Value is allowed for RxState only */
|
||||
HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
|
||||
Not to be used for neither gState nor RxState.
|
||||
Value is result of combination (Or) between gState and RxState values */
|
||||
HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_ERROR = 0xE0U /*!< Error
|
||||
Value is allowed for gState only */
|
||||
} HAL_UART_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL UART Reception type definition
|
||||
* @note HAL UART Reception type value aims to identify which type of Reception is ongoing.
|
||||
* It is expected to admit following values :
|
||||
* HAL_UART_RECEPTION_STANDARD = 0x00U,
|
||||
* HAL_UART_RECEPTION_TOIDLE = 0x01U,
|
||||
*/
|
||||
typedef uint32_t HAL_UART_RxTypeTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UART handle Structure definition
|
||||
*/
|
||||
typedef struct __UART_HandleTypeDef
|
||||
{
|
||||
USART_TypeDef *Instance; /*!< UART registers base address */
|
||||
|
||||
UART_InitTypeDef Init; /*!< UART communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< UART Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< UART Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
|
||||
|
||||
__IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
|
||||
and also related to Tx operations.
|
||||
This parameter can be a value of @ref HAL_UART_StateTypeDef */
|
||||
|
||||
__IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
|
||||
This parameter can be a value of @ref HAL_UART_StateTypeDef */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< UART Error code */
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */
|
||||
void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */
|
||||
void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */
|
||||
void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */
|
||||
void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */
|
||||
void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */
|
||||
void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
|
||||
void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
|
||||
void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
|
||||
void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
} UART_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL UART Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */
|
||||
HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */
|
||||
HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */
|
||||
HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */
|
||||
HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */
|
||||
HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */
|
||||
HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */
|
||||
HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */
|
||||
HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */
|
||||
|
||||
HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */
|
||||
HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */
|
||||
|
||||
} HAL_UART_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL UART Callback pointer definition
|
||||
*/
|
||||
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
|
||||
typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
|
||||
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Constants UART Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Error_Code UART Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */
|
||||
#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */
|
||||
#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */
|
||||
#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */
|
||||
#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Word_Length UART Word Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_WORDLENGTH_8B 0x00000000U
|
||||
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
|
||||
* @{
|
||||
*/
|
||||
#define UART_STOPBITS_1 0x00000000U
|
||||
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Parity UART Parity
|
||||
* @{
|
||||
*/
|
||||
#define UART_PARITY_NONE 0x00000000U
|
||||
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
||||
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
|
||||
* @{
|
||||
*/
|
||||
#define UART_HWCONTROL_NONE 0x00000000U
|
||||
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
|
||||
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
|
||||
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Mode UART Transfer Mode
|
||||
* @{
|
||||
*/
|
||||
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
|
||||
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
|
||||
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_State UART State
|
||||
* @{
|
||||
*/
|
||||
#define UART_STATE_DISABLE 0x00000000U
|
||||
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Over_Sampling UART Over Sampling
|
||||
* @{
|
||||
*/
|
||||
#define UART_OVERSAMPLING_16 0x00000000U
|
||||
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
|
||||
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
|
||||
* @{
|
||||
*/
|
||||
#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
|
||||
#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Flags UART FLags
|
||||
* Elements values convention: 0xXXXX
|
||||
* - 0xXXXX : Flag mask in the SR register
|
||||
* @{
|
||||
*/
|
||||
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
|
||||
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
|
||||
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
||||
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
|
||||
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
||||
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
||||
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
||||
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
|
||||
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
|
||||
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
|
||||
* Elements values convention: 0xY000XXXX
|
||||
* - XXXX : Interrupt mask (16 bits) in the Y register
|
||||
* - Y : Interrupt source register (2bits)
|
||||
* - 0001: CR1 register
|
||||
* - 0010: CR2 register
|
||||
* - 0011: CR3 register
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
|
||||
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
|
||||
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
|
||||
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
|
||||
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
|
||||
|
||||
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
|
||||
|
||||
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
|
||||
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values
|
||||
* @{
|
||||
*/
|
||||
#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */
|
||||
#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Macros UART Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset UART handle gstate & RxState
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
|
||||
} while(0U)
|
||||
#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Flushes the UART DR register
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
*/
|
||||
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
||||
|
||||
/** @brief Checks whether the specified UART flag is set or not.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
|
||||
* @arg UART_FLAG_LBD: LIN Break detection flag
|
||||
* @arg UART_FLAG_TXE: Transmit data register empty flag
|
||||
* @arg UART_FLAG_TC: Transmission Complete flag
|
||||
* @arg UART_FLAG_RXNE: Receive data register not empty flag
|
||||
* @arg UART_FLAG_IDLE: Idle Line detection flag
|
||||
* @arg UART_FLAG_ORE: Overrun Error flag
|
||||
* @arg UART_FLAG_NE: Noise Error flag
|
||||
* @arg UART_FLAG_FE: Framing Error flag
|
||||
* @arg UART_FLAG_PE: Parity Error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clears the specified UART pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
|
||||
* @arg UART_FLAG_LBD: LIN Break detection flag.
|
||||
* @arg UART_FLAG_TC: Transmission Complete flag.
|
||||
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
|
||||
*
|
||||
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
|
||||
* error) and IDLE (Idle line detected) flags are cleared by software
|
||||
* sequence: a read operation to USART_SR register followed by a read
|
||||
* operation to USART_DR register.
|
||||
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
||||
* @note TC flag can be also cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a write operation to USART_DR register.
|
||||
* @note TXE flag is cleared only by a write to the USART_DR register.
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Clears the UART PE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR; \
|
||||
tmpreg = (__HANDLE__)->Instance->DR; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clears the UART FE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART NE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART ORE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART IDLE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Enable the specified UART interrupt.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the UART interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_PE: Parity Error interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
|
||||
|
||||
/** @brief Disable the specified UART interrupt.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the UART interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_PE: Parity Error interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
|
||||
|
||||
/** @brief Checks whether the specified UART interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __IT__ specifies the UART interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
|
||||
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
|
||||
|
||||
/** @brief Enable CTS flow control
|
||||
* @note This macro allows to enable CTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
|
||||
do{ \
|
||||
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Disable CTS flow control
|
||||
* @note This macro allows to disable CTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
|
||||
do{ \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Enable RTS flow control
|
||||
* This macro allows to enable RTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
|
||||
do{ \
|
||||
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Disable RTS flow control
|
||||
* This macro allows to disable RTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
|
||||
do{ \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
|
||||
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Macro to enable the UART's one bit sample method
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
|
||||
|
||||
/** @brief Macro to disable the UART's one bit sample method
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
||||
|
||||
/** @brief Enable UART
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
||||
|
||||
/** @brief Disable UART
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup UART_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
|
||||
HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
|
||||
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
|
||||
|
||||
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
|
||||
|
||||
void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions **************************************************/
|
||||
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
|
||||
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Constants UART Private Constants
|
||||
* @{
|
||||
*/
|
||||
/** @brief UART interruptions flag mask
|
||||
*
|
||||
*/
|
||||
#define UART_IT_MASK 0x0000FFFFU
|
||||
|
||||
#define UART_CR1_REG_INDEX 1U
|
||||
#define UART_CR2_REG_INDEX 2U
|
||||
#define UART_CR3_REG_INDEX 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Macros UART Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
|
||||
((LENGTH) == UART_WORDLENGTH_9B))
|
||||
#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
|
||||
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
|
||||
((STOPBITS) == UART_STOPBITS_2))
|
||||
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
|
||||
((PARITY) == UART_PARITY_EVEN) || \
|
||||
((PARITY) == UART_PARITY_ODD))
|
||||
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
|
||||
(((CONTROL) == UART_HWCONTROL_NONE) || \
|
||||
((CONTROL) == UART_HWCONTROL_RTS) || \
|
||||
((CONTROL) == UART_HWCONTROL_CTS) || \
|
||||
((CONTROL) == UART_HWCONTROL_RTS_CTS))
|
||||
#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
|
||||
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
|
||||
((STATE) == UART_STATE_ENABLE))
|
||||
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
|
||||
((SAMPLING) == UART_OVERSAMPLING_8))
|
||||
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
|
||||
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
|
||||
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
|
||||
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
|
||||
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
|
||||
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 10500000U)
|
||||
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
|
||||
|
||||
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
|
||||
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
|
||||
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
|
||||
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
|
||||
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
|
||||
|
||||
#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
|
||||
#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
|
||||
#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U)
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
|
||||
#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
|
||||
(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Functions UART Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_UART_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,645 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_usart.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of USART HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_USART_H
|
||||
#define __STM32F2xx_HAL_USART_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup USART
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup USART_Exported_Types USART Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief USART Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
|
||||
The baud rate is computed using the following formula:
|
||||
- IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
|
||||
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
|
||||
|
||||
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
||||
This parameter can be a value of @ref USART_Word_Length */
|
||||
|
||||
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
||||
This parameter can be a value of @ref USART_Stop_Bits */
|
||||
|
||||
uint32_t Parity; /*!< Specifies the parity mode.
|
||||
This parameter can be a value of @ref USART_Parity
|
||||
@note When parity is enabled, the computed parity is inserted
|
||||
at the MSB position of the transmitted data (9th bit when
|
||||
the word length is set to 9 data bits; 8th bit when the
|
||||
word length is set to 8 data bits). */
|
||||
|
||||
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
||||
This parameter can be a value of @ref USART_Mode */
|
||||
|
||||
uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
|
||||
This parameter can be a value of @ref USART_Clock_Polarity */
|
||||
|
||||
uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
|
||||
This parameter can be a value of @ref USART_Clock_Phase */
|
||||
|
||||
uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
|
||||
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
|
||||
This parameter can be a value of @ref USART_Last_Bit */
|
||||
} USART_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
||||
HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
|
||||
HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
|
||||
HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
||||
HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */
|
||||
HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
|
||||
HAL_USART_STATE_ERROR = 0x04U /*!< Error */
|
||||
} HAL_USART_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief USART handle Structure definition
|
||||
*/
|
||||
typedef struct __USART_HandleTypeDef
|
||||
{
|
||||
USART_TypeDef *Instance; /*!< USART registers base address */
|
||||
|
||||
USART_InitTypeDef Init; /*!< Usart communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to Usart Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< Usart Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< Usart Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to Usart Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< Usart Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< Usart Rx Transfer Counter */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< Usart Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< Usart Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_USART_StateTypeDef State; /*!< Usart communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< USART Error code */
|
||||
|
||||
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
|
||||
void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */
|
||||
void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */
|
||||
void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */
|
||||
void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */
|
||||
void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */
|
||||
void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */
|
||||
void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */
|
||||
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
|
||||
|
||||
} USART_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL USART Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */
|
||||
HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */
|
||||
HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */
|
||||
HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */
|
||||
HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */
|
||||
HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */
|
||||
HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */
|
||||
|
||||
HAL_USART_MSPINIT_CB_ID = 0x07U, /*!< USART MspInit callback ID */
|
||||
HAL_USART_MSPDEINIT_CB_ID = 0x08U /*!< USART MspDeInit callback ID */
|
||||
|
||||
} HAL_USART_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL USART Callback pointer definition
|
||||
*/
|
||||
typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */
|
||||
|
||||
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup USART_Exported_Constants USART Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Error_Code USART Error Code
|
||||
* @brief USART Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_USART_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_USART_ERROR_PE 0x00000001U /*!< Parity error */
|
||||
#define HAL_USART_ERROR_NE 0x00000002U /*!< Noise error */
|
||||
#define HAL_USART_ERROR_FE 0x00000004U /*!< Frame error */
|
||||
#define HAL_USART_ERROR_ORE 0x00000008U /*!< Overrun error */
|
||||
#define HAL_USART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_USART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Word_Length USART Word Length
|
||||
* @{
|
||||
*/
|
||||
#define USART_WORDLENGTH_8B 0x00000000U
|
||||
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Stop_Bits USART Number of Stop Bits
|
||||
* @{
|
||||
*/
|
||||
#define USART_STOPBITS_1 0x00000000U
|
||||
#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
|
||||
#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
||||
#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Parity USART Parity
|
||||
* @{
|
||||
*/
|
||||
#define USART_PARITY_NONE 0x00000000U
|
||||
#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
||||
#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Mode USART Mode
|
||||
* @{
|
||||
*/
|
||||
#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
|
||||
#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
|
||||
#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Clock USART Clock
|
||||
* @{
|
||||
*/
|
||||
#define USART_CLOCK_DISABLE 0x00000000U
|
||||
#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Clock_Polarity USART Clock Polarity
|
||||
* @{
|
||||
*/
|
||||
#define USART_POLARITY_LOW 0x00000000U
|
||||
#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Clock_Phase USART Clock Phase
|
||||
* @{
|
||||
*/
|
||||
#define USART_PHASE_1EDGE 0x00000000U
|
||||
#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Last_Bit USART Last Bit
|
||||
* @{
|
||||
*/
|
||||
#define USART_LASTBIT_DISABLE 0x00000000U
|
||||
#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_NACK_State USART NACK State
|
||||
* @{
|
||||
*/
|
||||
#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
|
||||
#define USART_NACK_DISABLE 0x00000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Flags USART Flags
|
||||
* Elements values convention: 0xXXXX
|
||||
* - 0xXXXX : Flag mask in the SR register
|
||||
* @{
|
||||
*/
|
||||
#define USART_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
||||
#define USART_FLAG_TC ((uint32_t)USART_SR_TC)
|
||||
#define USART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
||||
#define USART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
||||
#define USART_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
||||
#define USART_FLAG_NE ((uint32_t)USART_SR_NE)
|
||||
#define USART_FLAG_FE ((uint32_t)USART_SR_FE)
|
||||
#define USART_FLAG_PE ((uint32_t)USART_SR_PE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USART_Interrupt_definition USART Interrupts Definition
|
||||
* Elements values convention: 0xY000XXXX
|
||||
* - XXXX : Interrupt mask in the XX register
|
||||
* - Y : Interrupt source register (2bits)
|
||||
* - 01: CR1 register
|
||||
* - 10: CR2 register
|
||||
* - 11: CR3 register
|
||||
* @{
|
||||
*/
|
||||
#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
|
||||
#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
|
||||
#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
|
||||
#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
|
||||
#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
|
||||
#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup USART_Exported_Macros USART Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset USART handle state
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_USART_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
|
||||
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Check whether the specified USART flag is set or not.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg USART_FLAG_TXE: Transmit data register empty flag
|
||||
* @arg USART_FLAG_TC: Transmission Complete flag
|
||||
* @arg USART_FLAG_RXNE: Receive data register not empty flag
|
||||
* @arg USART_FLAG_IDLE: Idle Line detection flag
|
||||
* @arg USART_FLAG_ORE: Overrun Error flag
|
||||
* @arg USART_FLAG_NE: Noise Error flag
|
||||
* @arg USART_FLAG_FE: Framing Error flag
|
||||
* @arg USART_FLAG_PE: Parity Error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the specified USART pending flags.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg USART_FLAG_TC: Transmission Complete flag.
|
||||
* @arg USART_FLAG_RXNE: Receive data register not empty flag.
|
||||
*
|
||||
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
|
||||
* error) and IDLE (Idle line detected) flags are cleared by software
|
||||
* sequence: a read operation to USART_SR register followed by a read
|
||||
* operation to USART_DR register.
|
||||
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
||||
* @note TC flag can be also cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a write operation to USART_DR register.
|
||||
* @note TXE flag is cleared only by a write to the USART_DR register.
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Clear the USART PE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR; \
|
||||
tmpreg = (__HANDLE__)->Instance->DR; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the USART FE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the USART NE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the USART ORE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clear the USART IDLE pending flag.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Enables or disables the specified USART interrupts.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __INTERRUPT__ specifies the USART interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg USART_IT_TC: Transmission complete interrupt
|
||||
* @arg USART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg USART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg USART_IT_PE: Parity Error interrupt
|
||||
* @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
|
||||
#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == USART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == USART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
|
||||
|
||||
/** @brief Checks whether the specified USART interrupt has occurred or not.
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @param __IT__ specifies the USART interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg USART_IT_TC: Transmission complete interrupt
|
||||
* @arg USART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg USART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg USART_IT_ERR: Error interrupt
|
||||
* @arg USART_IT_PE: Parity Error interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == USART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == USART_CR2_REG_INDEX)? \
|
||||
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
|
||||
|
||||
/** @brief Macro to enable the USART's one bit sample method
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 |= USART_CR3_ONEBIT)
|
||||
|
||||
/** @brief Macro to disable the USART's one bit sample method
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
||||
|
||||
/** @brief Enable USART
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
||||
|
||||
/** @brief Disable USART
|
||||
* @param __HANDLE__ specifies the USART Handle.
|
||||
* USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup USART_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup USART_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
|
||||
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, pUSART_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup USART_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
|
||||
HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
|
||||
HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart);
|
||||
HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart);
|
||||
|
||||
void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
|
||||
void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup USART_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
|
||||
uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup USART_Private_Constants USART Private Constants
|
||||
* @{
|
||||
*/
|
||||
/** @brief USART interruptions flag mask
|
||||
*
|
||||
*/
|
||||
#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
|
||||
USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
|
||||
|
||||
#define USART_CR1_REG_INDEX 1U
|
||||
#define USART_CR2_REG_INDEX 2U
|
||||
#define USART_CR3_REG_INDEX 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup USART_Private_Macros USART Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \
|
||||
((NACK) == USART_NACK_DISABLE))
|
||||
|
||||
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
|
||||
((LASTBIT) == USART_LASTBIT_ENABLE))
|
||||
|
||||
#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || \
|
||||
((CPHA) == USART_PHASE_2EDGE))
|
||||
|
||||
#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || \
|
||||
((CPOL) == USART_POLARITY_HIGH))
|
||||
|
||||
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
|
||||
((CLOCK) == USART_CLOCK_ENABLE))
|
||||
|
||||
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
|
||||
((LENGTH) == USART_WORDLENGTH_9B))
|
||||
|
||||
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
|
||||
((STOPBITS) == USART_STOPBITS_0_5) || \
|
||||
((STOPBITS) == USART_STOPBITS_1_5) || \
|
||||
((STOPBITS) == USART_STOPBITS_2))
|
||||
|
||||
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
|
||||
((PARITY) == USART_PARITY_EVEN) || \
|
||||
((PARITY) == USART_PARITY_ODD))
|
||||
|
||||
#define IS_USART_MODE(MODE) ((((MODE) & (~((uint32_t)USART_MODE_TX_RX))) == 0x00U) && ((MODE) != 0x00U))
|
||||
|
||||
#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 7500000U)
|
||||
|
||||
#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
|
||||
|
||||
#define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100U)
|
||||
|
||||
#define USART_DIVFRAQ(_PCLK_, _BAUD_) ((((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U)
|
||||
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
|
||||
|
||||
#define USART_BRR(_PCLK_, _BAUD_) (((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
((USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
|
||||
(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x07U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup USART_Private_Functions USART Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_USART_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,301 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_wwdg.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of WWDG HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_HAL_WWDG_H
|
||||
#define STM32F2xx_HAL_WWDG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup WWDG
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Types WWDG Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief WWDG Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
|
||||
This parameter can be a value of @ref WWDG_Prescaler */
|
||||
|
||||
uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
|
||||
This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */
|
||||
|
||||
uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
|
||||
This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
|
||||
|
||||
uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not.
|
||||
This parameter can be a value of @ref WWDG_EWI_Mode */
|
||||
|
||||
} WWDG_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief WWDG handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __WWDG_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
|
||||
{
|
||||
WWDG_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
WWDG_InitTypeDef Init; /*!< WWDG required parameters */
|
||||
|
||||
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
|
||||
void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */
|
||||
|
||||
void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */
|
||||
#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
|
||||
} WWDG_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL WWDG common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */
|
||||
HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */
|
||||
} HAL_WWDG_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL WWDG Callback pointer definition
|
||||
*/
|
||||
typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */
|
||||
|
||||
#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Flag_definition WWDG Flag definition
|
||||
* @brief WWDG Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Prescaler WWDG Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */
|
||||
#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
|
||||
#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
|
||||
#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode
|
||||
* @{
|
||||
*/
|
||||
#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */
|
||||
#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup WWDG_Private_Macros WWDG Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
|
||||
((__PRESCALER__) == WWDG_PRESCALER_2) || \
|
||||
((__PRESCALER__) == WWDG_PRESCALER_4) || \
|
||||
((__PRESCALER__) == WWDG_PRESCALER_8))
|
||||
|
||||
#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W))
|
||||
|
||||
#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T))
|
||||
|
||||
#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \
|
||||
((__MODE__) == WWDG_EWI_DISABLE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported macros ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the WWDG peripheral.
|
||||
* @param __HANDLE__ WWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
|
||||
|
||||
/**
|
||||
* @brief Enable the WWDG early wakeup interrupt.
|
||||
* @param __HANDLE__: WWDG handle
|
||||
* @param __INTERRUPT__ specifies the interrupt to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_IT_EWI: Early wakeup interrupt
|
||||
* @note Once enabled this interrupt cannot be disabled except by a system reset.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the selected WWDG interrupt has occurred or not.
|
||||
* @param __HANDLE__ WWDG handle
|
||||
* @param __INTERRUPT__ specifies the it to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
|
||||
* @retval The new state of WWDG_FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
|
||||
|
||||
/** @brief Clear the WWDG interrupt pending bits.
|
||||
* bits to clear the selected interrupt pending bits.
|
||||
* @param __HANDLE__ WWDG handle
|
||||
* @param __INTERRUPT__ specifies the interrupt pending bit to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
|
||||
*/
|
||||
#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified WWDG flag is set or not.
|
||||
* @param __HANDLE__ WWDG handle
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
|
||||
* @retval The new state of WWDG_FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the WWDG's pending flags.
|
||||
* @param __HANDLE__ WWDG handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Check whether the specified WWDG interrupt source is enabled or not.
|
||||
* @param __HANDLE__ WWDG Handle.
|
||||
* @param __INTERRUPT__ specifies the WWDG interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg WWDG_IT_EWI: Early Wakeup Interrupt
|
||||
* @retval state of __INTERRUPT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup WWDG_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup WWDG_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
|
||||
void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID,
|
||||
pWWDG_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup WWDG_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ******************************************************/
|
||||
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
|
||||
void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
|
||||
void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_HAL_WWDG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -1,640 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL CORTEX driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
|
||||
functions
|
||||
(+) Low power mode configuration (SCB register of Cortex-MCU)
|
||||
(+) MPU API to configure and enable regions
|
||||
(MPU services provided only on some devices)
|
||||
(+) API to access to MCU info (CPUID register)
|
||||
(+) API to enable fault handler (SHCSR accesses)
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_LL_CORTEX_H
|
||||
#define __STM32F2xx_LL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL CORTEX
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
|
||||
* @{
|
||||
*/
|
||||
#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
|
||||
#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
|
||||
#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
|
||||
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
|
||||
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
|
||||
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
|
||||
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
|
||||
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
|
||||
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
|
||||
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
|
||||
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
|
||||
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
|
||||
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
|
||||
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
|
||||
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
|
||||
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
|
||||
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function checks if the Systick counter flag is active or not.
|
||||
* @note It can be used in timeout function on application side.
|
||||
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
|
||||
{
|
||||
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
|
||||
* @param Source This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
|
||||
{
|
||||
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
|
||||
{
|
||||
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
|
||||
{
|
||||
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Processor uses sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleep(void)
|
||||
{
|
||||
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Processor uses deep sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
|
||||
{
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
|
||||
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
|
||||
* empty main application.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
|
||||
{
|
||||
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Do not sleep when returning to Thread mode.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
|
||||
{
|
||||
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
|
||||
* processor.
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
|
||||
{
|
||||
/* Set SEVEONPEND bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
|
||||
* excluded
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
|
||||
{
|
||||
/* Clear SEVEONPEND bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable a fault in System handler control register (SHCSR)
|
||||
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
|
||||
* @param Fault This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_HANDLER_FAULT_USG
|
||||
* @arg @ref LL_HANDLER_FAULT_BUS
|
||||
* @arg @ref LL_HANDLER_FAULT_MEM
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
|
||||
{
|
||||
/* Enable the system handler fault */
|
||||
SET_BIT(SCB->SHCSR, Fault);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable a fault in System handler control register (SHCSR)
|
||||
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
|
||||
* @param Fault This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_HANDLER_FAULT_USG
|
||||
* @arg @ref LL_HANDLER_FAULT_BUS
|
||||
* @arg @ref LL_HANDLER_FAULT_MEM
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
|
||||
{
|
||||
/* Disable the system handler fault */
|
||||
CLEAR_BIT(SCB->SHCSR, Fault);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Implementer code
|
||||
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
|
||||
* @retval Value should be equal to 0x41 for ARM
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Variant number (The r value in the rnpn product revision identifier)
|
||||
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
|
||||
* @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Constant number
|
||||
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
|
||||
* @retval Value should be equal to 0xF for Cortex-M3 devices
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Part number
|
||||
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
|
||||
* @retval Value should be equal to 0xC23 for Cortex-M3
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
|
||||
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
|
||||
* @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
/** @defgroup CORTEX_LL_EF_MPU MPU
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable MPU with input options
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
|
||||
* @param Options This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
|
||||
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
|
||||
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
|
||||
{
|
||||
/* Enable the MPU*/
|
||||
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
|
||||
/* Ensure MPU settings take effects */
|
||||
__DSB();
|
||||
/* Sequence instruction fetches using update settings */
|
||||
__ISB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable MPU
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Disable(void)
|
||||
{
|
||||
/* Make sure outstanding transfers are done */
|
||||
__DMB();
|
||||
/* Disable MPU*/
|
||||
WRITE_REG(MPU->CTRL, 0U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if MPU is enabled or not
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
|
||||
{
|
||||
return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable a MPU region
|
||||
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Enable the MPU region */
|
||||
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure and enable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR XN LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR AP LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR S LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR C LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR B LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR SIZE LL_MPU_ConfigRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @param Address Value of region base address
|
||||
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
|
||||
* @param Attributes This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
|
||||
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
|
||||
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
|
||||
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
|
||||
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
|
||||
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
|
||||
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
|
||||
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
|
||||
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
|
||||
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
|
||||
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
|
||||
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
|
||||
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Set base address */
|
||||
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
|
||||
/* Configure MPU */
|
||||
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
|
||||
* MPU_RASR ENABLE LL_MPU_DisableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Disable the MPU region */
|
||||
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_CORTEX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,204 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_crc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRC LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_LL_CRC_H
|
||||
#define STM32F2xx_LL_CRC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(CRC)
|
||||
|
||||
/** @defgroup CRC_LL CRC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__)
|
||||
|
||||
/**
|
||||
* @brief Read a value in CRC register
|
||||
* @param __INSTANCE__ CRC Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Reset the CRC calculation unit.
|
||||
* @note If Programmable Initial CRC value feature
|
||||
* is available, also set the Data Register to the value stored in the
|
||||
* CRC_INIT register, otherwise, reset Data Register to its default value.
|
||||
* @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit
|
||||
* @param CRCx CRC Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx)
|
||||
{
|
||||
SET_BIT(CRCx->CR, CRC_CR_RESET);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CRC_LL_EF_Data_Management Data_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write given 32-bit data to the CRC calculator
|
||||
* @rmtoll DR DR LL_CRC_FeedData32
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
WRITE_REG(CRCx->DR, InData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return current CRC calculation result. 32 bits value is returned.
|
||||
* @rmtoll DR DR LL_CRC_ReadData32
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->DR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return data stored in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Read_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @retval Value stored in CRC_IDR register (General-purpose 8-bit data register).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(CRCx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Store data in the Independent Data(IDR) register.
|
||||
* @note This register can be used as a temporary storage location for one byte.
|
||||
* @rmtoll IDR IDR LL_CRC_Write_IDR
|
||||
* @param CRCx CRC Instance
|
||||
* @param InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData)
|
||||
{
|
||||
*((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData;
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined(CRC) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_LL_CRC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -1,934 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_LL_EXTI_H
|
||||
#define __STM32F2xx_LL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (EXTI)
|
||||
|
||||
/** @defgroup EXTI_LL EXTI
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private Macros ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
|
||||
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
|
||||
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
|
||||
|
||||
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
|
||||
This parameter can be set either to ENABLE or DISABLE */
|
||||
|
||||
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
|
||||
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
|
||||
|
||||
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
|
||||
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
|
||||
} LL_EXTI_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EC_LINE LINE
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
|
||||
#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
|
||||
#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
|
||||
#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
|
||||
#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
|
||||
#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
|
||||
#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
|
||||
#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
|
||||
#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
|
||||
#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
|
||||
#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
|
||||
#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
|
||||
#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
|
||||
#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
|
||||
#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
|
||||
#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
|
||||
#if defined(EXTI_IMR_IM16)
|
||||
#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
|
||||
#if defined(EXTI_IMR_IM18)
|
||||
#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
|
||||
#if defined(EXTI_IMR_IM20)
|
||||
#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM21)
|
||||
#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM22)
|
||||
#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM25)
|
||||
#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM26)
|
||||
#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM27)
|
||||
#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM28)
|
||||
#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM29)
|
||||
#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM30)
|
||||
#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM31)
|
||||
#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
|
||||
|
||||
|
||||
#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
|
||||
/** @defgroup EXTI_LL_EC_MODE Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
|
||||
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
|
||||
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
|
||||
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
|
||||
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
|
||||
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in EXTI register
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in EXTI register
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->IMR, ExtiLine);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->IMR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->EMR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->EMR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a rising edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_RTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->RTSR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a rising edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_RTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->RTSR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
|
||||
* @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a falling edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_FTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->FTSR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a Falling edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_FTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for the same interrupt line.
|
||||
* In this case, both generate a trigger condition.
|
||||
* @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->FTSR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
|
||||
* @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
|
||||
* @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
|
||||
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
|
||||
* resulting in an interrupt request generation.
|
||||
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
|
||||
* register (by writing a 1 into the bit)
|
||||
* @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->SWIER, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval @note This bit is set when the selected edge event arrives on the interrupt
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Clear ExtLine Flags for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
WRITE_REG(EXTI->PR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||||
uint32_t LL_EXTI_DeInit(void);
|
||||
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* EXTI */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_EXTI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,893 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_fsmc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FSMC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_LL_FSMC_H
|
||||
#define STM32F2xx_LL_FSMC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FSMC_LL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FSMC_LL_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
|
||||
((__BANK__) == FSMC_NORSRAM_BANK2) || \
|
||||
((__BANK__) == FSMC_NORSRAM_BANK3) || \
|
||||
((__BANK__) == FSMC_NORSRAM_BANK4))
|
||||
#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
|
||||
((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
|
||||
#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
|
||||
((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
|
||||
((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
|
||||
#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
|
||||
((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
|
||||
((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
|
||||
#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
|
||||
((__MODE__) == FSMC_ACCESS_MODE_B) || \
|
||||
((__MODE__) == FSMC_ACCESS_MODE_C) || \
|
||||
((__MODE__) == FSMC_ACCESS_MODE_D))
|
||||
#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
|
||||
((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
|
||||
#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
|
||||
((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
|
||||
#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
|
||||
((__MODE__) == FSMC_WRAP_MODE_ENABLE))
|
||||
#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
|
||||
((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
|
||||
#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
|
||||
((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
|
||||
#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
|
||||
((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
|
||||
#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
|
||||
((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
|
||||
#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
|
||||
((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
|
||||
#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
|
||||
#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
|
||||
((__BURST__) == FSMC_WRITE_BURST_ENABLE))
|
||||
#define IS_FSMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
|
||||
((__CCLOCK__) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
|
||||
#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
|
||||
#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
|
||||
#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
|
||||
#define IS_FSMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U)
|
||||
#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
|
||||
#define IS_FSMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U))
|
||||
#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
|
||||
#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
|
||||
|
||||
|
||||
#define IS_FSMC_NAND_BANK(__BANK__) ((__BANK__) == FSMC_NAND_BANK3)
|
||||
#define IS_FSMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
|
||||
((__FEATURE__) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
|
||||
#define IS_FSMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
|
||||
((__WIDTH__) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
|
||||
#define IS_FSMC_ECC_STATE(__STATE__) (((__STATE__) == FSMC_NAND_ECC_DISABLE) || \
|
||||
((__STATE__) == FSMC_NAND_ECC_ENABLE))
|
||||
|
||||
#define IS_FSMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
|
||||
((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
|
||||
((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
|
||||
((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
|
||||
((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
|
||||
((__SIZE__) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
|
||||
#define IS_FSMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U)
|
||||
#define IS_FSMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U)
|
||||
#define IS_FSMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U)
|
||||
#define IS_FSMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U)
|
||||
#define IS_FSMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U)
|
||||
#define IS_FSMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U)
|
||||
#define IS_FSMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NAND_DEVICE)
|
||||
|
||||
#define IS_FSMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_PCCARD_DEVICE)
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup FSMC_LL_Exported_typedef FSMC Low Layer Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
|
||||
#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
|
||||
#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
|
||||
#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
|
||||
|
||||
#define FSMC_NORSRAM_DEVICE FSMC_Bank1
|
||||
#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
|
||||
#define FSMC_NAND_DEVICE FSMC_Bank2_3
|
||||
#define FSMC_PCCARD_DEVICE FSMC_Bank4
|
||||
|
||||
/**
|
||||
* @brief FSMC NORSRAM Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
|
||||
This parameter can be a value of @ref FSMC_NORSRAM_Bank */
|
||||
|
||||
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
|
||||
multiplexed on the data bus or not.
|
||||
This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
|
||||
|
||||
uint32_t MemoryType; /*!< Specifies the type of external memory attached to
|
||||
the corresponding memory device.
|
||||
This parameter can be a value of @ref FSMC_Memory_Type */
|
||||
|
||||
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
|
||||
This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
|
||||
|
||||
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
|
||||
valid only with synchronous burst Flash memories.
|
||||
This parameter can be a value of @ref FSMC_Burst_Access_Mode */
|
||||
|
||||
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
|
||||
the Flash memory in burst mode.
|
||||
This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
|
||||
|
||||
uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
|
||||
memory, valid only when accessing Flash memories in burst mode.
|
||||
This parameter can be a value of @ref FSMC_Wrap_Mode */
|
||||
|
||||
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
|
||||
clock cycle before the wait state or during the wait state,
|
||||
valid only when accessing memories in burst mode.
|
||||
This parameter can be a value of @ref FSMC_Wait_Timing */
|
||||
|
||||
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
|
||||
This parameter can be a value of @ref FSMC_Write_Operation */
|
||||
|
||||
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
|
||||
signal, valid for Flash memory access in burst mode.
|
||||
This parameter can be a value of @ref FSMC_Wait_Signal */
|
||||
|
||||
uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
|
||||
This parameter can be a value of @ref FSMC_Extended_Mode */
|
||||
|
||||
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
|
||||
valid only with asynchronous Flash memories.
|
||||
This parameter can be a value of @ref FSMC_AsynchronousWait */
|
||||
|
||||
uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
|
||||
This parameter can be a value of @ref FSMC_Write_Burst */
|
||||
|
||||
} FSMC_NORSRAM_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NORSRAM Timing parameters structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
|
||||
the duration of the address setup time.
|
||||
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
|
||||
@note This parameter is not used with synchronous NOR Flash memories. */
|
||||
|
||||
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
|
||||
the duration of the address hold time.
|
||||
This parameter can be a value between Min_Data = 1 and Max_Data = 15.
|
||||
@note This parameter is not used with synchronous NOR Flash memories. */
|
||||
|
||||
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
|
||||
the duration of the data setup time.
|
||||
This parameter can be a value between Min_Data = 1 and Max_Data = 255.
|
||||
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
|
||||
NOR Flash memories. */
|
||||
|
||||
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
|
||||
the duration of the bus turnaround.
|
||||
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
|
||||
@note This parameter is only used for multiplexed NOR Flash memories. */
|
||||
|
||||
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
|
||||
HCLK cycles. This parameter can be a value between Min_Data = 2 and
|
||||
Max_Data = 16.
|
||||
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
|
||||
accesses. */
|
||||
|
||||
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
|
||||
to the memory before getting the first data.
|
||||
The parameter value depends on the memory type as shown below:
|
||||
- It must be set to 0 in case of a CRAM
|
||||
- It is don't care in asynchronous NOR, SRAM or ROM accesses
|
||||
- It may assume a value between Min_Data = 2 and Max_Data = 17
|
||||
in NOR Flash memories with synchronous burst mode enable */
|
||||
|
||||
uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
|
||||
This parameter can be a value of @ref FSMC_Access_Mode */
|
||||
} FSMC_NORSRAM_TimingTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NAND Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
|
||||
This parameter can be a value of @ref FSMC_NAND_Bank */
|
||||
|
||||
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
|
||||
This parameter can be any value of @ref FSMC_Wait_feature */
|
||||
|
||||
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
|
||||
This parameter can be any value of @ref FSMC_NAND_Data_Width */
|
||||
|
||||
uint32_t EccComputation; /*!< Enables or disables the ECC computation.
|
||||
This parameter can be any value of @ref FSMC_ECC */
|
||||
|
||||
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
|
||||
This parameter can be any value of @ref FSMC_ECC_Page_Size */
|
||||
|
||||
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
||||
delay between CLE low and RE low.
|
||||
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
|
||||
|
||||
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
||||
delay between ALE low and RE low.
|
||||
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
||||
} FSMC_NAND_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC NAND Timing parameters structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
|
||||
the command assertion for NAND-Flash read or write access
|
||||
to common/Attribute or I/O memory space (depending on
|
||||
the memory space timing to be configured).
|
||||
This parameter can be a value between Min_Data = 0 and Max_Data = 254 */
|
||||
|
||||
uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
|
||||
command for NAND-Flash read or write access to
|
||||
common/Attribute or I/O memory space (depending on the
|
||||
memory space timing to be configured).
|
||||
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
|
||||
|
||||
uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
|
||||
(and data for write access) after the command de-assertion
|
||||
for NAND-Flash read or write access to common/Attribute
|
||||
or I/O memory space (depending on the memory space timing
|
||||
to be configured).
|
||||
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
|
||||
|
||||
uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
|
||||
data bus is kept in HiZ after the start of a NAND-Flash
|
||||
write access to common/Attribute or I/O memory space (depending
|
||||
on the memory space timing to be configured).
|
||||
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
|
||||
} FSMC_NAND_PCC_TimingTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FSMC PCCARD Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
|
||||
This parameter can be any value of @ref FSMC_Wait_feature */
|
||||
|
||||
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
||||
delay between CLE low and RE low.
|
||||
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
|
||||
|
||||
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
|
||||
delay between ALE low and RE low.
|
||||
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
|
||||
}FSMC_PCCARD_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @addtogroup FSMC_LL_Exported_Constants FSMC Low Layer Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NORSRAM_BANK1 (0x00000000U)
|
||||
#define FSMC_NORSRAM_BANK2 (0x00000002U)
|
||||
#define FSMC_NORSRAM_BANK3 (0x00000004U)
|
||||
#define FSMC_NORSRAM_BANK4 (0x00000006U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U)
|
||||
#define FSMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Memory_Type FSMC Memory Type
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_MEMORY_TYPE_SRAM (0x00000000U)
|
||||
#define FSMC_MEMORY_TYPE_PSRAM (0x00000004U)
|
||||
#define FSMC_MEMORY_TYPE_NOR (0x00000008U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_NORSRAM_Data_Width FSMC NORSRAM Data Width
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U)
|
||||
#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U)
|
||||
#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U)
|
||||
#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_BURST_ACCESS_MODE_DISABLE (0x00000000U)
|
||||
#define FSMC_BURST_ACCESS_MODE_ENABLE (0x00000100U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U)
|
||||
#define FSMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WRAP_MODE_DISABLE (0x00000000U)
|
||||
#define FSMC_WRAP_MODE_ENABLE (0x00000400U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WAIT_TIMING_BEFORE_WS (0x00000000U)
|
||||
#define FSMC_WAIT_TIMING_DURING_WS (0x00000800U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Write_Operation FSMC Write Operation
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WRITE_OPERATION_DISABLE (0x00000000U)
|
||||
#define FSMC_WRITE_OPERATION_ENABLE (0x00001000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WAIT_SIGNAL_DISABLE (0x00000000U)
|
||||
#define FSMC_WAIT_SIGNAL_ENABLE (0x00002000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_EXTENDED_MODE_DISABLE (0x00000000U)
|
||||
#define FSMC_EXTENDED_MODE_ENABLE (0x00004000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U)
|
||||
#define FSMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Write_Burst FSMC Write Burst
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_WRITE_BURST_DISABLE (0x00000000U)
|
||||
#define FSMC_WRITE_BURST_ENABLE (0x00080000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Continous_Clock FSMC Continuous Clock
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U)
|
||||
#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Access_Mode FSMC Access Mode
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_ACCESS_MODE_A (0x00000000U)
|
||||
#define FSMC_ACCESS_MODE_B (0x10000000U)
|
||||
#define FSMC_ACCESS_MODE_C (0x20000000U)
|
||||
#define FSMC_ACCESS_MODE_D (0x30000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FSMC_LL_NAND_Controller FSMC NAND Controller
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NAND_BANK2 (0x00000010U)
|
||||
#define FSMC_NAND_BANK3 (0x00000100U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_Wait_feature FSMC Wait feature
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE (0x00000000U)
|
||||
#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_PCR_MEMORY_TYPE_PCCARD (0x00000000U)
|
||||
#define FSMC_PCR_MEMORY_TYPE_NAND (0x00000008U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 (0x00000000U)
|
||||
#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 (0x00000010U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_ECC FSMC ECC
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NAND_ECC_DISABLE (0x00000000U)
|
||||
#define FSMC_NAND_ECC_ENABLE (0x00000040U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U)
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U)
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U)
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U)
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U)
|
||||
#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FSMC_LL_Interrupt_definition FSMC Low Layer Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_IT_RISING_EDGE (0x00000008U)
|
||||
#define FSMC_IT_LEVEL (0x00000010U)
|
||||
#define FSMC_IT_FALLING_EDGE (0x00000020U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_Flag_definition FSMC Low Layer Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FSMC_FLAG_RISING_EDGE (0x00000001U)
|
||||
#define FSMC_FLAG_LEVEL (0x00000002U)
|
||||
#define FSMC_FLAG_FALLING_EDGE (0x00000004U)
|
||||
#define FSMC_FLAG_FEMPT (0x00000040U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup FSMC_LL_Private_Macros FSMC_LL Private Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Macros
|
||||
* @brief macros to handle NOR device enable/disable and read/write operations
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the NORSRAM device access.
|
||||
* @param __INSTANCE__ FSMC_NORSRAM Instance
|
||||
* @param __BANK__ FSMC_NORSRAM Bank
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\
|
||||
|= FSMC_BCR1_MBKEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the NORSRAM device access.
|
||||
* @param __INSTANCE__ FSMC_NORSRAM Instance
|
||||
* @param __BANK__ FSMC_NORSRAM Bank
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\
|
||||
&= ~FSMC_BCR1_MBKEN)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
|
||||
* @brief macros to handle NAND device enable/disable
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the NAND device access.
|
||||
* @param __INSTANCE__ FSMC_NAND Instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
|
||||
((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
|
||||
|
||||
/**
|
||||
* @brief Disable the NAND device access.
|
||||
* @param __INSTANCE__ FSMC_NAND Instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? CLEAR_BIT((__INSTANCE__)->PCR2, FSMC_PCR2_PBKEN): \
|
||||
CLEAR_BIT((__INSTANCE__)->PCR3, FSMC_PCR3_PBKEN))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_PCCARD_Macros FMC PCCARD Macros
|
||||
* @brief macros to handle PCCARD read/write operations
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Enable the PCCARD device access.
|
||||
* @param __INSTANCE__ FSMC_PCCARD Instance
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the PCCARD device access.
|
||||
* @param __INSTANCE__ FSMC_PCCARD Instance
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NAND_Interrupt FSMC NAND Interrupt
|
||||
* @brief macros to handle NAND interrupts
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the NAND device interrupt.
|
||||
* @param __INSTANCE__ FSMC_NAND instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @param __INTERRUPT__ FSMC_NAND interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
|
||||
* @arg FSMC_IT_LEVEL: Interrupt level.
|
||||
* @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
|
||||
((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Disable the NAND device interrupt.
|
||||
* @param __INSTANCE__ FSMC_NAND Instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @param __INTERRUPT__ FSMC_NAND interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
|
||||
* @arg FSMC_IT_LEVEL: Interrupt level.
|
||||
* @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
|
||||
((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Get flag status of the NAND device.
|
||||
* @param __INSTANCE__ FSMC_NAND Instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @param __FLAG__ FSMC_NAND flag
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
|
||||
* @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
|
||||
* @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
|
||||
* @arg FSMC_FLAG_FEMPT: FIFO empty flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
|
||||
(((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear flag status of the NAND device.
|
||||
* @param __INSTANCE__ FSMC_NAND Instance
|
||||
* @param __BANK__ FSMC_NAND Bank
|
||||
* @param __FLAG__ FSMC_NAND flag
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
|
||||
* @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
|
||||
* @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
|
||||
* @arg FSMC_FLAG_FEMPT: FIFO empty flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
|
||||
((__INSTANCE__)->SR3 &= ~(__FLAG__)))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_PCCARD_Interrupt FSMC PCCARD Interrupt
|
||||
* @brief macros to handle PCCARD interrupts
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the PCCARD device interrupt.
|
||||
* @param __INSTANCE__ FSMC_PCCARD instance
|
||||
* @param __INTERRUPT__ FSMC_PCCARD interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
|
||||
* @arg FSMC_IT_LEVEL: Interrupt level.
|
||||
* @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the PCCARD device interrupt.
|
||||
* @param __INSTANCE__ FSMC_PCCARD instance
|
||||
* @param __INTERRUPT__ FSMC_PCCARD interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
|
||||
* @arg FSMC_IT_LEVEL: Interrupt level.
|
||||
* @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get flag status of the PCCARD device.
|
||||
* @param __INSTANCE__ FSMC_PCCARD instance
|
||||
* @param __FLAG__ FSMC_PCCARD flag
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
|
||||
* @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
|
||||
* @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
|
||||
* @arg FSMC_FLAG_FEMPT: FIFO empty flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear flag status of the PCCARD device.
|
||||
* @param __INSTANCE__ FSMC_PCCARD instance
|
||||
* @param __FLAG__ FSMC_PCCARD flag
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
|
||||
* @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
|
||||
* @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
|
||||
* @arg FSMC_FLAG_FEMPT: FIFO empty flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NORSRAM NOR SRAM
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device,
|
||||
FSMC_NORSRAM_InitTypeDef *Init);
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device,
|
||||
FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device,
|
||||
FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
|
||||
uint32_t ExtendedMode);
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device,
|
||||
FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NAND NAND
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
|
||||
HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device,
|
||||
FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device,
|
||||
FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
|
||||
HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank,
|
||||
uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FSMC_LL_PCCARD PCCARD
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
|
||||
HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device,
|
||||
FSMC_NAND_PCC_TimingTypeDef *Timing);
|
||||
HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device,
|
||||
FSMC_NAND_PCC_TimingTypeDef *Timing);
|
||||
HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device,
|
||||
FSMC_NAND_PCC_TimingTypeDef *Timing);
|
||||
HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_LL_FSMC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,983 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_LL_GPIO_H
|
||||
#define __STM32F2xx_LL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI)
|
||||
|
||||
/** @defgroup GPIO_LL GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief LL GPIO Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_LL_EC_PIN */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_MODE.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_SPEED.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
|
||||
|
||||
uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
|
||||
|
||||
uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_PULL.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
|
||||
|
||||
uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_AF.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
|
||||
} LL_GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PIN PIN
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
|
||||
#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
|
||||
#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
|
||||
#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
|
||||
#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
|
||||
#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
|
||||
#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
|
||||
#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
|
||||
#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
|
||||
#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
|
||||
#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
|
||||
#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
|
||||
#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
|
||||
#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
|
||||
#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
|
||||
#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
|
||||
#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
|
||||
GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
|
||||
GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
|
||||
GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
|
||||
GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
|
||||
GPIO_BSRR_BS_15) /*!< Select all pins */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_MODE Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
|
||||
#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
|
||||
#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
|
||||
#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_OUTPUT Output Type
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
|
||||
#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_SPEED Output Speed
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
|
||||
#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
|
||||
#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_AF Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
|
||||
#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
|
||||
#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
|
||||
#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
|
||||
#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
|
||||
#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
|
||||
#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
|
||||
#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
|
||||
#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
|
||||
#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
|
||||
#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
|
||||
#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */
|
||||
#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */
|
||||
#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */
|
||||
#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */
|
||||
#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configure gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_SetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Mode This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
|
||||
{
|
||||
MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_GetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->MODER,
|
||||
(GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @param OutputType This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Speed This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)),
|
||||
(Speed << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
|
||||
(GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Pull This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
|
||||
{
|
||||
MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->PUPDR,
|
||||
(GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)),
|
||||
(Alternate << (POSITION_VAL(Pin) * 4U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[0],
|
||||
(GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)),
|
||||
(Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[1],
|
||||
(GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Lock configuration of several pins for a dedicated port.
|
||||
* @note When the lock sequence has been applied on a port bit, the
|
||||
* value of this port bit can no longer be modified until the
|
||||
* next reset.
|
||||
* @note Each lock bit freezes a specific configuration register
|
||||
* (control and alternate function registers).
|
||||
* @rmtoll LCKR LCKK LL_GPIO_LockPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
__IO uint32_t temp;
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
temp = READ_REG(GPIOx->LCKR);
|
||||
(void) temp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
|
||||
* @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
|
||||
* @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Data_Access Data Access
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return full input data register value for a dedicated port.
|
||||
* @rmtoll IDR IDy LL_GPIO_ReadInputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Input data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll IDR IDy LL_GPIO_IsInputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Write output data register for the port.
|
||||
* @rmtoll ODR ODy LL_GPIO_WriteOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PortValue Level value for each pin of the port
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
|
||||
{
|
||||
WRITE_REG(GPIOx->ODR, PortValue);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return full output data register value for a dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_ReadOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Output data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->ODR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to high level on dedicated gpio port.
|
||||
* @rmtoll BSRR BSy LL_GPIO_SetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BSRR, PinMask);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to low level on dedicated gpio port.
|
||||
* @rmtoll BSRR BRy LL_GPIO_ResetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BSRR, (PinMask << 16));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Toggle data value for several pin of dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_TogglePin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
uint32_t odr = READ_REG(GPIOx->ODR);
|
||||
WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
|
||||
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_GPIO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,305 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_iwdg.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of IWDG LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_LL_IWDG_H
|
||||
#define STM32F2xx_LL_IWDG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(IWDG)
|
||||
|
||||
/** @defgroup IWDG_LL IWDG
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
|
||||
#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
|
||||
#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
|
||||
#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines
|
||||
* @brief Flags defines which can be used with LL_IWDG_ReadReg function
|
||||
* @{
|
||||
*/
|
||||
#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */
|
||||
#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider
|
||||
* @{
|
||||
*/
|
||||
#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */
|
||||
#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */
|
||||
#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */
|
||||
#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */
|
||||
#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */
|
||||
#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */
|
||||
#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in IWDG register
|
||||
* @param __INSTANCE__ IWDG Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in IWDG register
|
||||
* @param __INSTANCE__ IWDG Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup IWDG_LL_EF_Configuration Configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Start the Independent Watchdog
|
||||
* @note Except if the hardware watchdog option is selected
|
||||
* @rmtoll KR KEY LL_IWDG_Enable
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reloads IWDG counter with value defined in the reload register
|
||||
* @rmtoll KR KEY LL_IWDG_ReloadCounter
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
|
||||
* @rmtoll KR KEY LL_IWDG_EnableWriteAccess
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
|
||||
* @rmtoll KR KEY LL_IWDG_DisableWriteAccess
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Select the prescaler of the IWDG
|
||||
* @rmtoll PR PR LL_IWDG_SetPrescaler
|
||||
* @param IWDGx IWDG Instance
|
||||
* @param Prescaler This parameter can be one of the following values:
|
||||
* @arg @ref LL_IWDG_PRESCALER_4
|
||||
* @arg @ref LL_IWDG_PRESCALER_8
|
||||
* @arg @ref LL_IWDG_PRESCALER_16
|
||||
* @arg @ref LL_IWDG_PRESCALER_32
|
||||
* @arg @ref LL_IWDG_PRESCALER_64
|
||||
* @arg @ref LL_IWDG_PRESCALER_128
|
||||
* @arg @ref LL_IWDG_PRESCALER_256
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler)
|
||||
{
|
||||
WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the selected prescaler of the IWDG
|
||||
* @rmtoll PR PR LL_IWDG_GetPrescaler
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_IWDG_PRESCALER_4
|
||||
* @arg @ref LL_IWDG_PRESCALER_8
|
||||
* @arg @ref LL_IWDG_PRESCALER_16
|
||||
* @arg @ref LL_IWDG_PRESCALER_32
|
||||
* @arg @ref LL_IWDG_PRESCALER_64
|
||||
* @arg @ref LL_IWDG_PRESCALER_128
|
||||
* @arg @ref LL_IWDG_PRESCALER_256
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
return (READ_REG(IWDGx->PR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Specify the IWDG down-counter reload value
|
||||
* @rmtoll RLR RL LL_IWDG_SetReloadCounter
|
||||
* @param IWDGx IWDG Instance
|
||||
* @param Counter Value between Min_Data=0 and Max_Data=0x0FFF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter)
|
||||
{
|
||||
WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the specified IWDG down-counter reload value
|
||||
* @rmtoll RLR RL LL_IWDG_GetReloadCounter
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval Value between Min_Data=0 and Max_Data=0x0FFF
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
return (READ_REG(IWDGx->RLR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Check if flag Prescaler Value Update is set or not
|
||||
* @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if flag Reload Value Update is set or not
|
||||
* @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if flags Prescaler & Reload Value Update are reset or not
|
||||
* @rmtoll SR PVU LL_IWDG_IsReady\n
|
||||
* SR RVU LL_IWDG_IsReady
|
||||
* @param IWDGx IWDG Instance
|
||||
* @retval State of bits (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx)
|
||||
{
|
||||
return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU) == 0U) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* IWDG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F2xx_LL_IWDG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -1,510 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_LL_PWR_H
|
||||
#define __STM32F2xx_LL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(PWR)
|
||||
|
||||
/** @defgroup PWR_LL PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
|
||||
* @brief Flags defines which can be used with LL_PWR_WriteReg function
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
|
||||
#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
|
||||
* @brief Flags defines which can be used with LL_PWR_ReadReg function
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
|
||||
#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
|
||||
#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
|
||||
#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin 1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
|
||||
#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power regulator ON) when the CPU enters deepsleep */
|
||||
#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage regulator in main mode during deepsleep mode */
|
||||
#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage regulator in low-power mode during deepsleep mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */
|
||||
#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */
|
||||
#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */
|
||||
#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */
|
||||
#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */
|
||||
#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */
|
||||
#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */
|
||||
#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
|
||||
* @{
|
||||
*/
|
||||
#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin 1 : PA0 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in PWR register
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in PWR register
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EF_Configuration Configuration
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Enable the Flash Power Down in Stop Mode
|
||||
* @rmtoll CR FPDS LL_PWR_EnableFlashPowerDown
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void)
|
||||
{
|
||||
SET_BIT(PWR->CR, PWR_CR_FPDS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Flash Power Down in Stop Mode
|
||||
* @rmtoll CR FPDS LL_PWR_DisableFlashPowerDown
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void)
|
||||
{
|
||||
CLEAR_BIT(PWR->CR, PWR_CR_FPDS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if the Flash Power Down in Stop Mode is enabled
|
||||
* @rmtoll CR FPDS LL_PWR_IsEnabledFlashPowerDown
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable access to the backup domain
|
||||
* @rmtoll CR DBP LL_PWR_EnableBkUpAccess
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
|
||||
{
|
||||
SET_BIT(PWR->CR, PWR_CR_DBP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable access to the backup domain
|
||||
* @rmtoll CR DBP LL_PWR_DisableBkUpAccess
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
|
||||
{
|
||||
CLEAR_BIT(PWR->CR, PWR_CR_DBP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if the backup domain is enabled
|
||||
* @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
|
||||
}
|
||||
/**
|
||||
* @brief Enable the backup regulator
|
||||
* @rmtoll CSR BRE LL_PWR_EnableBkUpRegulator
|
||||
* @note The BRE bit of the PWR_CSR register is protected against parasitic write access.
|
||||
* The LL_PWR_EnableBkUpAccess() must be called before using this API.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void)
|
||||
{
|
||||
SET_BIT(PWR->CSR, PWR_CSR_BRE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the backup Regulator
|
||||
* @rmtoll CSR BRE LL_PWR_DisableBkUpRegulator
|
||||
* @note The BRE bit of the PWR_CSR register is protected against parasitic write access.
|
||||
* The LL_PWR_EnableBkUpAccess() must be called before using this API.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void)
|
||||
{
|
||||
CLEAR_BIT(PWR->CSR, PWR_CSR_BRE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if the backup Regulator is enabled
|
||||
* @rmtoll CSR BRE LL_PWR_IsEnabledBkUpRegulator
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set voltage regulator mode during deep sleep mode
|
||||
* @rmtoll CR LPDS LL_PWR_SetRegulModeDS
|
||||
* @param RegulMode This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
|
||||
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
|
||||
{
|
||||
MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get voltage regulator mode during deep sleep mode
|
||||
* @rmtoll CR LPDS LL_PWR_GetRegulModeDS
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
|
||||
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set power down mode when CPU enters deepsleep
|
||||
* @rmtoll CR PDDS LL_PWR_SetPowerMode\n
|
||||
* @rmtoll CR LPDS LL_PWR_SetPowerMode
|
||||
* @param PDMode This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
|
||||
* @arg @ref LL_PWR_MODE_STOP_LPREGU
|
||||
* @arg @ref LL_PWR_MODE_STANDBY
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
|
||||
{
|
||||
MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get power down mode when CPU enters deepsleep
|
||||
* @rmtoll CR PDDS LL_PWR_GetPowerMode\n
|
||||
* @rmtoll CR LPDS LL_PWR_GetPowerMode
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
|
||||
* @arg @ref LL_PWR_MODE_STOP_LPREGU
|
||||
* @arg @ref LL_PWR_MODE_STANDBY
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure the voltage threshold detected by the Power Voltage Detector
|
||||
* @rmtoll CR PLS LL_PWR_SetPVDLevel
|
||||
* @param PVDLevel This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_PVDLEVEL_0
|
||||
* @arg @ref LL_PWR_PVDLEVEL_1
|
||||
* @arg @ref LL_PWR_PVDLEVEL_2
|
||||
* @arg @ref LL_PWR_PVDLEVEL_3
|
||||
* @arg @ref LL_PWR_PVDLEVEL_4
|
||||
* @arg @ref LL_PWR_PVDLEVEL_5
|
||||
* @arg @ref LL_PWR_PVDLEVEL_6
|
||||
* @arg @ref LL_PWR_PVDLEVEL_7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
|
||||
{
|
||||
MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the voltage threshold detection
|
||||
* @rmtoll CR PLS LL_PWR_GetPVDLevel
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_PWR_PVDLEVEL_0
|
||||
* @arg @ref LL_PWR_PVDLEVEL_1
|
||||
* @arg @ref LL_PWR_PVDLEVEL_2
|
||||
* @arg @ref LL_PWR_PVDLEVEL_3
|
||||
* @arg @ref LL_PWR_PVDLEVEL_4
|
||||
* @arg @ref LL_PWR_PVDLEVEL_5
|
||||
* @arg @ref LL_PWR_PVDLEVEL_6
|
||||
* @arg @ref LL_PWR_PVDLEVEL_7
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Power Voltage Detector
|
||||
* @rmtoll CR PVDE LL_PWR_EnablePVD
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_EnablePVD(void)
|
||||
{
|
||||
SET_BIT(PWR->CR, PWR_CR_PVDE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Power Voltage Detector
|
||||
* @rmtoll CR PVDE LL_PWR_DisablePVD
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_DisablePVD(void)
|
||||
{
|
||||
CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if Power Voltage Detector is enabled
|
||||
* @rmtoll CR PVDE LL_PWR_IsEnabledPVD
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the WakeUp PINx functionality
|
||||
* @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin
|
||||
* @param WakeUpPin This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_WAKEUP_PIN1
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
|
||||
{
|
||||
SET_BIT(PWR->CSR, WakeUpPin);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the WakeUp PINx functionality
|
||||
* @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin
|
||||
* @param WakeUpPin This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_WAKEUP_PIN1
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
|
||||
{
|
||||
CLEAR_BIT(PWR->CSR, WakeUpPin);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if the WakeUp PINx functionality is enabled
|
||||
* @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin
|
||||
* @param WakeUpPin This parameter can be one of the following values:
|
||||
* @arg @ref LL_PWR_WAKEUP_PIN1
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Wake-up Flag
|
||||
* @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Standby Flag
|
||||
* @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Backup regulator ready Flag
|
||||
* @rmtoll CSR BRR LL_PWR_IsActiveFlag_BRR
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR));
|
||||
}
|
||||
/**
|
||||
* @brief Indicate whether VDD voltage is below the selected PVD threshold
|
||||
* @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
|
||||
{
|
||||
return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear Standby Flag
|
||||
* @rmtoll CR CSBF LL_PWR_ClearFlag_SB
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
|
||||
{
|
||||
SET_BIT(PWR->CR, PWR_CR_CSBF);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear Wake-up Flags
|
||||
* @rmtoll CR CWUF LL_PWR_ClearFlag_WU
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
|
||||
{
|
||||
SET_BIT(PWR->CR, PWR_CR_CWUF);
|
||||
}
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup PWR_LL_EF_Init De-initialization function
|
||||
* @{
|
||||
*/
|
||||
ErrorStatus LL_PWR_DeInit(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined(PWR) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_PWR_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,337 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_rng.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RNG LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F2xx_LL_RNG_H
|
||||
#define STM32F2xx_LL_RNG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (RNG)
|
||||
|
||||
/** @defgroup RNG_LL RNG
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines
|
||||
* @brief Flags defines which can be used with LL_RNG_ReadReg function
|
||||
* @{
|
||||
*/
|
||||
#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */
|
||||
#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */
|
||||
#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */
|
||||
#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */
|
||||
#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_LL_EC_IT IT Defines
|
||||
* @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros
|
||||
* @{
|
||||
*/
|
||||
#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in RNG register
|
||||
* @param __INSTANCE__ RNG Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in RNG register
|
||||
* @param __INSTANCE__ RNG Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable Random Number Generation
|
||||
* @rmtoll CR RNGEN LL_RNG_Enable
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx)
|
||||
{
|
||||
SET_BIT(RNGx->CR, RNG_CR_RNGEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Random Number Generation
|
||||
* @rmtoll CR RNGEN LL_RNG_Disable
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx)
|
||||
{
|
||||
CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if Random Number Generator is enabled
|
||||
* @rmtoll CR RNGEN LL_RNG_IsEnabled
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Indicate if the RNG Data ready Flag is set or not
|
||||
* @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Indicate if the Clock Error Current Status Flag is set or not
|
||||
* @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Indicate if the Seed Error Current Status Flag is set or not
|
||||
* @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Indicate if the Clock Error Interrupt Status Flag is set or not
|
||||
* @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Indicate if the Seed Error Interrupt Status Flag is set or not
|
||||
* @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear Clock Error interrupt Status (CEIS) Flag
|
||||
* @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
WRITE_REG(RNGx->SR, ~RNG_SR_CEIS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear Seed Error interrupt Status (SEIS) Flag
|
||||
* @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx)
|
||||
{
|
||||
WRITE_REG(RNGx->SR, ~RNG_SR_SEIS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_LL_EF_IT_Management IT Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable Random Number Generator Interrupt
|
||||
* (applies for either Seed error, Clock Error or Data ready interrupts)
|
||||
* @rmtoll CR IE LL_RNG_EnableIT
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx)
|
||||
{
|
||||
SET_BIT(RNGx->CR, RNG_CR_IE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Random Number Generator Interrupt
|
||||
* (applies for either Seed error, Clock Error or Data ready interrupts)
|
||||
* @rmtoll CR IE LL_RNG_DisableIT
|
||||
* @param RNGx RNG Instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx)
|
||||
{
|
||||
CLEAR_BIT(RNGx->CR, RNG_CR_IE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if Random Number Generator Interrupt is enabled
|
||||
* (applies for either Seed error, Clock Error or Data ready interrupts)
|
||||
* @rmtoll CR IE LL_RNG_IsEnabledIT
|
||||
* @param RNGx RNG Instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_LL_EF_Data_Management Data Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return32-bit Random Number value
|
||||
* @rmtoll DR RNDATA LL_RNG_ReadRandData32
|
||||
* @param RNGx RNG Instance
|
||||
* @retval Generated 32-bit random value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(RNGx->DR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* RNG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_RNG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -1,846 +0,0 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_ll_system.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SYSTEM LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL SYSTEM driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) Some of the FLASH features need to be handled in the SYSTEM file.
|
||||
(+) Access to DBGCMU registers
|
||||
(+) Access to SYSCFG registers
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_LL_SYSTEM_H
|
||||
#define __STM32F2xx_LL_SYSTEM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f2xx.h"
|
||||
|
||||
/** @addtogroup STM32F2xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
|
||||
|
||||
/** @defgroup SYSTEM_LL SYSTEM
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /*!< Main Flash memory mapped at 0x00000000 */
|
||||
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
|
||||
#define LL_SYSCFG_REMAP_FSMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */
|
||||
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(SYSCFG_PMC_MII_RMII_SEL)
|
||||
/** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSCFG_PMC_ETHMII (uint32_t)0x00000000 /*!< ETH Media MII interface */
|
||||
#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* SYSCFG_PMC_MII_RMII_SEL */
|
||||
|
||||
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSCFG_EXTI_PORTA (uint32_t)0 /*!< EXTI PORT A */
|
||||
#define LL_SYSCFG_EXTI_PORTB (uint32_t)1 /*!< EXTI PORT B */
|
||||
#define LL_SYSCFG_EXTI_PORTC (uint32_t)2 /*!< EXTI PORT C */
|
||||
#define LL_SYSCFG_EXTI_PORTD (uint32_t)3 /*!< EXTI PORT D */
|
||||
#define LL_SYSCFG_EXTI_PORTE (uint32_t)4 /*!< EXTI PORT E */
|
||||
#if defined(GPIOF)
|
||||
#define LL_SYSCFG_EXTI_PORTF (uint32_t)5 /*!< EXTI PORT F */
|
||||
#endif /* GPIOF */
|
||||
#if defined(GPIOG)
|
||||
#define LL_SYSCFG_EXTI_PORTG (uint32_t)6 /*!< EXTI PORT G */
|
||||
#endif /* GPIOG */
|
||||
#define LL_SYSCFG_EXTI_PORTH (uint32_t)7 /*!< EXTI PORT H */
|
||||
#if defined(GPIOI)
|
||||
#define LL_SYSCFG_EXTI_PORTI (uint32_t)8 /*!< EXTI PORT I */
|
||||
#endif /* GPIOI */
|
||||
#if defined(GPIOJ)
|
||||
#define LL_SYSCFG_EXTI_PORTJ (uint32_t)9 /*!< EXTI PORT J */
|
||||
#endif /* GPIOJ */
|
||||
#if defined(GPIOK)
|
||||
#define LL_SYSCFG_EXTI_PORTK (uint32_t)10 /*!< EXTI PORT k */
|
||||
#endif /* GPIOK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16 | 0) /*!< EXTI_POSITION_0 | EXTICR[0] */
|
||||
#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16 | 0) /*!< EXTI_POSITION_4 | EXTICR[0] */
|
||||
#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16 | 0) /*!< EXTI_POSITION_8 | EXTICR[0] */
|
||||
#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16 | 0) /*!< EXTI_POSITION_12 | EXTICR[0] */
|
||||
#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16 | 1) /*!< EXTI_POSITION_0 | EXTICR[1] */
|
||||
#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16 | 1) /*!< EXTI_POSITION_4 | EXTICR[1] */
|
||||
#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16 | 1) /*!< EXTI_POSITION_8 | EXTICR[1] */
|
||||
#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16 | 1) /*!< EXTI_POSITION_12 | EXTICR[1] */
|
||||
#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16 | 2) /*!< EXTI_POSITION_0 | EXTICR[2] */
|
||||
#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16 | 2) /*!< EXTI_POSITION_4 | EXTICR[2] */
|
||||
#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16 | 2) /*!< EXTI_POSITION_8 | EXTICR[2] */
|
||||
#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16 | 2) /*!< EXTI_POSITION_12 | EXTICR[2] */
|
||||
#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16 | 3) /*!< EXTI_POSITION_0 | EXTICR[3] */
|
||||
#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16 | 3) /*!< EXTI_POSITION_4 | EXTICR[3] */
|
||||
#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16 | 3) /*!< EXTI_POSITION_8 | EXTICR[3] */
|
||||
#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16 | 3) /*!< EXTI_POSITION_12 | EXTICR[3] */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
|
||||
* @{
|
||||
*/
|
||||
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
|
||||
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
|
||||
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
|
||||
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
|
||||
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
|
||||
* @{
|
||||
*/
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */
|
||||
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
|
||||
* @{
|
||||
*/
|
||||
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */
|
||||
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
|
||||
* @{
|
||||
*/
|
||||
#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
|
||||
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
|
||||
#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
|
||||
#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
|
||||
#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
|
||||
#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */
|
||||
#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */
|
||||
#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set memory mapping at address 0x00000000
|
||||
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory
|
||||
* @param Memory This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
||||
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
||||
* @arg @ref LL_SYSCFG_REMAP_FSMC
|
||||
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
|
||||
{
|
||||
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get memory mapping at address 0x00000000
|
||||
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
||||
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
||||
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
||||
* @arg @ref LL_SYSCFG_REMAP_FSMC
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the Compensation cell Power Down
|
||||
* @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell
|
||||
* @note The I/O compensation cell can be used only when the device supply
|
||||
* voltage ranges from 2.4 to 3.6 V
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void)
|
||||
{
|
||||
SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the Compensation cell Power Down
|
||||
* @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell
|
||||
* @note The I/O compensation cell can be used only when the device supply
|
||||
* voltage ranges from 2.4 to 3.6 V
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void)
|
||||
{
|
||||
CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Compensation Cell ready Flag
|
||||
* @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void)
|
||||
{
|
||||
return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY));
|
||||
}
|
||||
#if defined(SYSCFG_PMC_MII_RMII_SEL)
|
||||
/**
|
||||
* @brief Select Ethernet PHY interface
|
||||
* @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface
|
||||
* @param Interface This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_PMC_ETHMII
|
||||
* @arg @ref LL_SYSCFG_PMC_ETHRMII
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface)
|
||||
{
|
||||
MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Ethernet PHY interface
|
||||
* @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_PMC_ETHMII
|
||||
* @arg @ref LL_SYSCFG_PMC_ETHRMII
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL));
|
||||
}
|
||||
#endif /* SYSCFG_PMC_MII_RMII_SEL */
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @brief Configure source input for the EXTI external interrupt.
|
||||
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n
|
||||
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n
|
||||
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n
|
||||
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource
|
||||
* @param Port This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTA
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTB
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTC
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTD
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTE
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTH
|
||||
*
|
||||
* (*) value not defined in all devices
|
||||
* @param Line This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE0
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE1
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE2
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE3
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE4
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE5
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE6
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE7
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE8
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE9
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE10
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE11
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE12
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE13
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE14
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE15
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
|
||||
{
|
||||
MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the configured defined for specific EXTI Line
|
||||
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n
|
||||
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n
|
||||
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n
|
||||
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource
|
||||
* @param Line This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE0
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE1
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE2
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE3
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE4
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE5
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE6
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE7
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE8
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE9
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE10
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE11
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE12
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE13
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE14
|
||||
* @arg @ref LL_SYSCFG_EXTI_LINE15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTA
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTB
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTC
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTD
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTE
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
|
||||
* @arg @ref LL_SYSCFG_EXTI_PORTH
|
||||
* (*) value not defined in all devices
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return the device identifier
|
||||
* @note For STM32F2xxxx ,the device ID is 0x411
|
||||
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
|
||||
* @retval Values between Min_Data=0x00 and Max_Data=0xFFF
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the device revision identifier
|
||||
* @note This field indicates the revision of the device.
|
||||
For example, it is read as revA -> 0x1000,revZ -> 0x1001, revB -> 0x2000, revY -> 0x2001, revX -> 0x2003, rev1 -> 0x2007, revV -> 0x200F, rev2 -> 0x201F
|
||||
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
|
||||
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during SLEEP mode
|
||||
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during SLEEP mode
|
||||
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during STOP mode
|
||||
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during STOP mode
|
||||
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during STANDBY mode
|
||||
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during STANDBY mode
|
||||
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set Trace pin assignment control
|
||||
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
|
||||
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
|
||||
* @param PinAssignment This parameter can be one of the following values:
|
||||
* @arg @ref LL_DBGMCU_TRACE_NONE
|
||||
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
|
||||
{
|
||||
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Trace pin assignment control
|
||||
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
|
||||
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_DBGMCU_TRACE_NONE
|
||||
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
|
||||
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Freeze APB1 peripherals (group1 peripherals)
|
||||
* @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
|
||||
* @param Periphs This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
|
||||
{
|
||||
SET_BIT(DBGMCU->APB1FZ, Periphs);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Unfreeze APB1 peripherals (group1 peripherals)
|
||||
* @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
|
||||
* @param Periphs This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Freeze APB2 peripherals
|
||||
* @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
|
||||
* @param Periphs This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
|
||||
{
|
||||
SET_BIT(DBGMCU->APB2FZ, Periphs);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Unfreeze APB2 peripherals
|
||||
* @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
|
||||
* DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
|
||||
* @param Periphs This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
|
||||
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set FLASH Latency
|
||||
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
|
||||
* @param Latency This parameter can be one of the following values:
|
||||
* @arg @ref LL_FLASH_LATENCY_0
|
||||
* @arg @ref LL_FLASH_LATENCY_1
|
||||
* @arg @ref LL_FLASH_LATENCY_2
|
||||
* @arg @ref LL_FLASH_LATENCY_3
|
||||
* @arg @ref LL_FLASH_LATENCY_4
|
||||
* @arg @ref LL_FLASH_LATENCY_5
|
||||
* @arg @ref LL_FLASH_LATENCY_6
|
||||
* @arg @ref LL_FLASH_LATENCY_7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
|
||||
{
|
||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get FLASH Latency
|
||||
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_FLASH_LATENCY_0
|
||||
* @arg @ref LL_FLASH_LATENCY_1
|
||||
* @arg @ref LL_FLASH_LATENCY_2
|
||||
* @arg @ref LL_FLASH_LATENCY_3
|
||||
* @arg @ref LL_FLASH_LATENCY_4
|
||||
* @arg @ref LL_FLASH_LATENCY_5
|
||||
* @arg @ref LL_FLASH_LATENCY_6
|
||||
* @arg @ref LL_FLASH_LATENCY_7
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Prefetch
|
||||
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
|
||||
{
|
||||
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Prefetch
|
||||
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
|
||||
{
|
||||
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if Prefetch buffer is enabled
|
||||
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
|
||||
{
|
||||
return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Instruction cache
|
||||
* @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_EnableInstCache(void)
|
||||
{
|
||||
SET_BIT(FLASH->ACR, FLASH_ACR_ICEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Instruction cache
|
||||
* @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_DisableInstCache(void)
|
||||
{
|
||||
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Data cache
|
||||
* @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_EnableDataCache(void)
|
||||
{
|
||||
SET_BIT(FLASH->ACR, FLASH_ACR_DCEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Data cache
|
||||
* @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_DisableDataCache(void)
|
||||
{
|
||||
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Instruction cache reset
|
||||
* @note bit can be written only when the instruction cache is disabled
|
||||
* @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void)
|
||||
{
|
||||
SET_BIT(FLASH->ACR, FLASH_ACR_ICRST);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Instruction cache reset
|
||||
* @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void)
|
||||
{
|
||||
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable Data cache reset
|
||||
* @note bit can be written only when the data cache is disabled
|
||||
* @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void)
|
||||
{
|
||||
SET_BIT(FLASH->ACR, FLASH_ACR_DCRST);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable Data cache reset
|
||||
* @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void)
|
||||
{
|
||||
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_LL_SYSTEM_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue