MMX extraction often ends up as extract_i32(bitcast_v2i32(extract_i64(bitcast_v1i64(x86mmx v), 0)), 0) which fails to simplify on 32-bit targets as i64 isn't legal
llvm-svn: 296782
This patch reduces the stack frame size by not allocating the parameter area if
it is not required. In the current implementation LowerFormalArguments_64SVR4
already handles the parameter area, but LowerCall_64SVR4 does not
(when calculating the stack frame size). What this patch does is make
LowerCall_64SVR4 consistent with LowerFormalArguments_64SVR4.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29881
llvm-svn: 296771
The CallingConv.td rules allocate 8 bytes for these kinds of arguments
on AAPCS targets, but we were only recording the smaller amount. The
difference is theoretical on AArch64 because we don't actually store
more than the smaller amount, but it's still much better to have these
two components in agreement.
Based on Diana Picus's ARM equivalent patch (where it matters a lot
more).
llvm-svn: 296754
After r296750, we're able to match interleaved accesses having types wider than
128 bits. This patch updates the associated TTI costs.
Differential Revision: https://reviews.llvm.org/D29675
llvm-svn: 296751
This patch teaches (ARM|AArch64)ISelLowering.cpp to match illegal vector types
to interleaved access intrinsics as long as the types are multiples of the
vector register width. A "wide" access will now be mapped to multiple
interleave intrinsics similar to the way in which non-interleaved accesses with
illegal types are legalized into multiple accesses. I'll update the associated
TTI costs (in getInterleavedMemoryOpCost) as a follow-on.
Differential Revision: https://reviews.llvm.org/D29466
llvm-svn: 296750
Original commit message:
[ARM] Fix insert point for store rescheduling.
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
llvm-svn: 296718
Until now, we've had to use -global-isel to enable GISel. But using
that on other targets that don't support it will result in an abort, as we
can't build a full pipeline.
Additionally, we want to experiment with enabling GISel by default for
some targets: we can't just enable GISel by default, even among those
target that do have some support, because the level of support varies.
This first step adds an override for the target to explicitly define its
level of support. For AArch64, do that using
a new command-line option (I know..):
-aarch64-enable-global-isel-at-O=<N>
Where N is the opt-level below which GISel should be used.
Default that to -1, so that we still don't enable GISel anywhere.
We're not there yet!
While there, remove a couple LLVM_UNLIKELYs. Building the pipeline is
such a cold path that in practice that shouldn't matter at all.
llvm-svn: 296710
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296708
This code starts from the high end of the sorted vector of offsets, and
works backwards: it tries to find contiguous offsets, process them, then
pops them from the end of the vector. Most of the code agrees with this
order of processing, but one loop doesn't: it instead processes elements
from the low end of the vector (which are nodes with unrelated offsets).
Fix that loop to process the correct elements.
This has a few implications. One, we don't incorrectly return early when
processing multiple groups of offsets in the same block (which allows
rescheduling prera-ldst-insertpt.mir). Two, we pick the correct insert
point for loads, so they're correctly sorted (which affects the
scheduling of vldm-liveness.ll). I think it might also impact some of
the heuristics slightly.
Differential Revision: https://reviews.llvm.org/D30368
llvm-svn: 296701
Summary:
Avoids tons of prologue boilerplate when arguments are passed in memory
and left in memory. This can happen in a debug build or in a release
build when an argument alloca is escaped. This will dramatically affect
the code size of x86 debug builds, because X86 fast isel doesn't handle
arguments passed in memory at all. It only handles the x86_64 case of up
to 6 basic register parameters.
This is implemented by analyzing the entry block before ISel to identify
copy elision candidates. A copy elision candidate is an argument that is
used to fully initialize an alloca before any other possibly escaping
uses of that alloca. If an argument is a copy elision candidate, we set
a flag on the InputArg. If the the target generates loads from a fixed
stack object that matches the size and alignment requirements of the
alloca, the SelectionDAG builder will delete the stack object created
for the alloca and replace it with the fixed stack object. The load is
left behind to satisfy any remaining uses of the argument value. The
store is now dead and is therefore elided. The fixed stack object is
also marked as mutable, as it may now be modified by the user, and it
would be invalid to rematerialize the initial load from it.
Supersedes D28388
Fixes PR26328
Reviewers: chandlerc, MatzeB, qcolombet, inglorion, hans
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29668
llvm-svn: 296683
On Hexagon, values of type i1 are passed in registers of type i32,
even though i1 is not a legal value for these registers. This is a
special case and needs special handling to maintain consistency of
the lowering information.
This fixes PR32089.
llvm-svn: 296645
Lower i1, i8 and i16 call parameters by extending them before storing them on
the stack. Also make sure we encode the correct, extended size in the
corresponding memory operand, and that we compute the correct stack size in the
end.
The latter is a bit more complicated because we used to compute the stack size
in the getStackAddress method, based on the Size and Offset of the parameters.
However, if the last parameter is sign extended, we'd be using the wrong,
non-extended size, and we'd end up with a smaller stack than we need to hold the
extended value. Instead of hacking this up based on the value of Size in
getStackAddress, we move our stack size handling logic to assignArg, where we
have access to the CCState which knows everything we could possibly want to know
about the stack. This way we don't need to duplicate any knowledge or resort to
any ugly hacks.
On this same occasion, update the IRTranslator test to check the sizes of the
stores everywhere, not just for sign extended paramteres.
llvm-svn: 296631
This parsing code was incorrectly checking for invalid characters, so an
invalid instruction like:
msr spsr_w, r0
would be emitted as:
msr spsr_cxsf, r0
Differential revision: https://reviews.llvm.org/D30462
llvm-svn: 296607
To facilitate this, add a new hidden command-line option to disable
the explicit-locals pass. That causes llc to emit invalid code that doesn't
have all locals converted to get_local/set_local, however it simplifies
testwriting in many cases.
llvm-svn: 296540
This prevents generating stm r1!, {r0, r1} on Thumb1, where value
stored for r1 is UNKONWN.
Patch by Zhaoshi Zheng.
Differential Revision: https://reviews.llvm.org/D27910
llvm-svn: 296538
It's not clear to me if this is always better than
doing ds_write2_b64 This adds the constraint of
a 128-bit register input instead of a pair of
64-bit.
llvm-svn: 296512
If during scheduling we have identified that we cannot keep optimistic
occupancy increase critical register pressure limit and try scheduling
of the whole function again. In this case blocks with smaller pressure
will have a chance for better scheduling.
Differential Revision: https://reviews.llvm.org/D30442
llvm-svn: 296506
This change introduces new method to estimate register pressure in
GCNScheduler. Standard RPTracker gives huge error due to the following
reasons:
1. It does not account for live-ins or live-outs if value is not used
in the region itself. That creates a huge error in a very common case
if there are a lot of live-thu registers.
2. It does not properly count subregs.
3. It assumes a register used as an input operand can be reused as an
output. This is not always possible by itself, this is not what RA
will finally do in many cases for various reasons not limited to RA's
inability to do so, and this is not so if the value is actually a
live-thu.
In addition we can now see clear separation between live-in pressure
which we cannot change with the scheduling and tentative pressure
which we can change.
Differential Revision: https://reviews.llvm.org/D30439
llvm-svn: 296491
If two subregs of the same register are defined and we need to revert
schedule changing def order, we will end up with both instructions
having def,read-undef flags because adjustLaneLiveness() will only set
this flag but will not remove it.
Fix this by removing read-undef flags before calling adjustLaneLiveness.
Differential Revision: https://reviews.llvm.org/D30428
llvm-svn: 296484
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
Lower i32, float and double parameters that need to live on the stack. This
boils down to creating some G_GEPs starting from the stack pointer and storing
the values there. During the process we also keep track of the stack size and
use the final value in the ADJCALLSTACKDOWN/UP instructions.
We currently assert for smaller types, since they usually require extensions.
They will be handled in a separate patch.
llvm-svn: 296473
In Thumb2, instructions which write to the PC are UNPREDICTABLE if they are in
an IT block but not the last instruction in the block.
Previously, we only diagnosed this for LDM instructions, this patch extends the
diagnostic to cover all of the relevant instructions.
Differential Revision: https://reviews.llvm.org/D30398
llvm-svn: 296459
This is a patch for the outliner described in the RFC at:
http://lists.llvm.org/pipermail/llvm-dev/2016-August/104170.html
The outliner is a code-size reduction pass which works by finding
repeated sequences of instructions in a program, and replacing them with
calls to functions. This is useful to people working in low-memory
environments, where sacrificing performance for space is acceptable.
This adds an interprocedural outliner directly before printing assembly.
For reference on how this would work, this patch also includes X86
target hooks and an X86 test.
The outliner is run like so:
clang -mno-red-zone -mllvm -enable-machine-outliner file.c
Patch by Jessica Paquette<jpaquette@apple.com>!
rdar://29166825
Differential Revision: https://reviews.llvm.org/D26872
llvm-svn: 296418
The transform in question claims to be doing:
// fold (add (select cc, 0, c), x) -> (select cc, x, (add, x, c))
...starting in PerformADDCombineWithOperands(), but it wasn't actually checking for a setcc node
for the sext/zext patterns.
This is exactly the opposite of a transform I'd like to add to DAGCombiner's foldSelectOfConstants(),
so I was seeing infinite loops with my draft of a patch applied.
The changes in select_const.ll look positive (less instructions). The change in arm-and-tst-peephole.ll
is unrelated. We're changing the input IR in that test to preserve the intent of the test, but that's
not affected by this code change.
Differential Revision:
https://reviews.llvm.org/D30355
llvm-svn: 296389
DAGCombiner already supports peeking thorough shuffles to improve vector element extraction, but legalization often leaves us in situations where we need to extract vector elements after shuffles have already been lowered.
This patch adds support for VECTOR_EXTRACT_ELEMENT/PEXTRW/PEXTRB instructions to attempt to handle target shuffles as well. I've covered some basic scenarios including handling shuffle mask scaling and the implicit zero-extension of PEXTRW/PEXTRB, there is more that could be done here (that I've mentioned in TODOs) but I haven't found many cases where its worth it.
Differential Revision: https://reviews.llvm.org/D30176
llvm-svn: 296381
Summary:
SmallBitVector uses a malloc for more than 58 bits on a 64-bit target and more than 27 bits on a 32-bit target. Some of the vector types we deal with here use more than those number of elements and therefore cause a malloc.
APInt on the other hand supports up to 64 bits without a malloc. That's the maximum number of bits we need here so we can avoid a malloc for all cases by using APInt.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30392
llvm-svn: 296355
Summary:
SmallBitVector uses a malloc for more than 58 bits on a 64-bit target and more than 27 bits on a 32-bit target. Some of the vector types we deal with here use more than those number of elements and therefore cause a malloc.
APInt on the other hand supports up to 64 bits without a malloc. That's the maximum number of bits we need here so we can avoid a malloc for all cases by using APInt.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30390
llvm-svn: 296354
Some of the vectors are under sized to avoid heap allocation. In one case the vector was oversized.
Differential Revision: https://reviews.llvm.org/D30387
llvm-svn: 296353
Summary:
SmallBitVector uses a malloc for more than 58 bits on a 64-bit target and more than 27 bits on a 32-bit target. Some of the vector types we deal with here use more than those number of elements and therefore cause a malloc.
APInt on the other hand supports up to 64 bits without a malloc. That's the maximum number of bits we need here so we can avoid a malloc for all cases by using APInt. This will incur a minor increase in stack usage due to APInt storing the bit count separately from the data bits unlike SmallBitVector, but that should be ok.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30386
llvm-svn: 296352
This is a cleanup/rewrite of the printSysAlias function. This was not using the
tablegen instruction descriptions, but was "manually" decoding the
instructions. This has been replaced with calls to lookup_XYZ_ByEncoding
tablegen calls.
This revealed several problems. First, instruction IVAU had the wrong encoding.
This was cancelled out by the parser that incorrectly matched the wrong
encoding. Second, instruction CVAP was missing from the SystemOperands tablegen
descriptions, so this has been added. And third, the required target features
were not captured in the tablegen descriptions, so support for this has also
been added.
Differential Revision: https://reviews.llvm.org/D30329
llvm-svn: 296343
Currently we handle this correctly in arm, but in thumb we don't which leads to
an unpredictable instruction being emitted for LSL #0 in an IT block and SP not
being permitted in some cases when it should be.
For the thumb2 LSL we can handle this by making LSL #0 an alias of MOV in the
.td file, but for thumb1 we need to handle it in checkTargetMatchPredicate to
get the IT handling right. We also need to adjust the handling of
MOV rd, rn, LSL #0 to avoid generating the 16-bit encoding in an IT block. We
should also adjust it to allow SP in the same way that it is allowed in
MOV rd, rn, but I haven't done that here because it looks like it would take
quite a lot of work to get right.
Additionally correct the selection of the 16-bit shift instructions in
processInstruction, where it was checking if the two registers were equal when
it should have been checking if they were low. It appears that previously this
code was never executed and the 16-bit encoding was selected by default, but
the other changes I've done here have somehow made it start being used.
Differential Revision: https://reviews.llvm.org/D30294
llvm-svn: 296342
There are no instructions that have "[1]" as part of the assembly string;
FMOVXDhighr is out of date. This removes dead code.
Differential Revision: https://reviews.llvm.org/D30165
llvm-svn: 296327
- Verify that runtime metadata is actually valid runtime metadata when assembling, otherwise we could accept the following when assembling, but ocl runtime will reject it:
.amdgpu_runtime_metadata
{ amd.MDVersion: [ 2, 1 ], amd.RandomUnknownKey, amd.IsaInfo: ...
- Make IsaInfo optional, and always emit it.
Differential Revision: https://reviews.llvm.org/D30349
llvm-svn: 296324
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296272
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
With the "wasm32-unknown-unknown-wasm" triple, this allows writing out
simple wasm object files, and is another step in a larger series toward
migrating from ELF to general wasm object support. Note that this code
and the binary format itself is still experimental.
llvm-svn: 296190
This reverts commit r296009. It broke one out of tree target and also
does not account for all partial lines added or removed when calculating
PressureDiff.
llvm-svn: 296182
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296147
Provide a 64-bit pattern to use SUBFIC for subtracting from a 16-bit immediate.
The corresponding pattern already exists for 32-bit integers.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29387
llvm-svn: 296144
Emit clrrdi (extended mnemonic for rldicr) for AND-ing with masks that
clear bits from the right hand size.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29388
llvm-svn: 296143
The current pattern for extract bits in range is typically:
Mask.lshr(BitOffset).trunc(SubSizeInBits);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation of memory for the temporary variable.
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::extractBits() helper method which avoids the temporary memory allocation.
Differential Revision: https://reviews.llvm.org/D30336
llvm-svn: 296141
This time with the missing files.
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296134
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296132
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
Noticed while profiling PR32037, the target shuffle ops were being stored in SmallVector<*,8> types but the combiner could store as many as 16 ops at maximum depth (2 per depth).
llvm-svn: 296130
Previously LLVM was assuming 32-bit signed immediates which results in and with
a bitmask that has bit 31 set to incorrectly include bits 63-32 in the result.
After applying this patch I can now compile all of the FreeBSD mips assembly
code with clang.
This issue also affects the nor, slt and sltu macros and I will fix those in a
separate review.
Patch By: Alexander Richardson
Commit message reformatted by sdardis.
Reviewers: atanasyan, theraven, sdardis
Differential Revision: https://reviews.llvm.org/D30298
llvm-svn: 296125
Make the MIPS disassembler consistent with the other targets in returning
a Size of zero when the input buffer cannot contain an instruction due
to it's size. Previously it reported the minimum instruction size when
it failed due to the buffer not being big enough for an instruction
causing llvm-objdump to crash when disassembling all sections.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29984
llvm-svn: 296105
The current pattern for setting bits in range is typically:
Mask |= APInt::getBitsSet(MaskSizeInBits, LoPos, HiPos);
Which can be particularly slow for large APInts (MaskSizeInBits > 64) as they require the allocation memory for the temporary variable.
This is one of the key compile time issues identified in PR32037.
This patch adds the APInt::setBits() helper method which avoids the temporary memory allocation completely, this first implementation uses setBit() internally instead but already significantly reduces the regression in PR32037 (~10% drop). Additional optimization may be possible.
I investigated whether there is need for APInt::clearBits() and APInt::flipBits() equivalents but haven't seen these patterns to be particularly common, but reusing the code would be trivial.
Differential Revision: https://reviews.llvm.org/D30265
llvm-svn: 296102
The Fuchsia ABI defines slots from the thread pointer where the
stack-guard value for stack-protector, and the unsafe stack pointer
for safe-stack, are stored. This parallels the Android ABI support.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D30237
llvm-svn: 296081
This patch enables support for .f16x2 operations.
Added new register type Float16x2.
Added support for .f16x2 instructions.
Added handling of vectorized loads/stores of v2f16 values.
Differential Revision: https://reviews.llvm.org/D30057
Differential Revision: https://reviews.llvm.org/D30310
llvm-svn: 296032
FastISel wasn't checking the isFPOnlySP subtarget feature before emitting
double-precision operations, so it got completely invalid CodeGen for doubles
on Cortex-M4F.
The normal ISel testing wasn't spectacular either so I added a second RUN line
to improve that while I was in the area.
llvm-svn: 296031
In the bit tracker, references to other bit values in which the register
is 0 are prohibited. This means that generating self-referential register
cells like { w:32 [0-15]:s[0-15] [16-31]:s[15] } is impossible. In order
to get a self-referential cell, it had to be stored into a map and then
reloaded from it. To avoid this step, add a function that will set the
register to a given value without going through the map.
llvm-svn: 296025
If a subreg is used in an instruction it counts as a whole superreg
for the purpose of register pressure calculation. This patch corrects
improper register pressure calculation by examining operand's lane mask.
Differential Revision: https://reviews.llvm.org/D29835
llvm-svn: 296009
Introduce a common ValueHandler for call returns and formal arguments, and
inherit two different versions for handling the differences (at the moment the
only difference is the way physical registers are marked as used).
llvm-svn: 295973
Add support for lowering calls with parameters than can fit into regs. Use the
same ValueHandler that we used for function returns, but rename it to match its
new, extended purpose.
llvm-svn: 295971
This patch adjusts the most relaxed predicate of immediate operands to accept
immediate forms such as ~(0xf0000000|0x000f00000). Previously these forms
would be accepted by GAS and rejected by IAS.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29218
llvm-svn: 295965
The ARMConstantIslandPass didn't have support for handling accesses to
constant island objects through ARM::t2LDRBpci instructions. This adds
support for that.
This fixes PR31997.
llvm-svn: 295964
AVX versions of the converts work on f32/f64 types, while AVX512 version work on vectors.
Differential Revision: https://reviews.llvm.org/D29988
llvm-svn: 295940
Implement isLegalToVectorizeLoadChain for AMDGPU to avoid
producing private address spaces accesses that will need to be
split up later. This was doing the wrong thing in the case
where the queried chain was an even number of elements.
A possible <4 x i32> store was being split into
store <2 x i32>
store i32
store i32
rather than
store <2 x i32>
store <2 x i32>
when legal.
llvm-svn: 295933
The manual is unclear on the details of this. It's not
clear to me if denormals are not allowed with clamp,
or if that is only omod. Not allowing denorms for
fp16 or fp64 isn't useful so I also question if that
is really a restriction. Same with whether this is valid
without IEEE mode enabled.
llvm-svn: 295905
This should avoid reporting any stack needs to be allocated in the
case where no stack is truly used. An unused stack slot is still
left around in other cases where there are real stack objects
but no spilling occurs.
llvm-svn: 295891
This allows us to ensure that 0 is never a valid pointer
to a user object, and ensures that the offset is always legal
without needing a register to access it. This comes at the cost
of usable offsets and wasted stack space.
llvm-svn: 295877
Summary:
Extend AArch64RedundantCopyElimination to catch cases where the register
that is known to be zero is COPY'd in the predecessor block. Before
this change, this pass would catch cases like:
CBZW %W0, <BB#1>
BB#1:
%W0 = COPY %WZR // removed
After this change, cases like the one below are also caught:
%W0 = COPY %W1
CBZW %W1, <BB#1>
BB#1:
%W0 = COPY %WZR // removed
This change results in a 4% increase in static copies removed by this
pass when compiling the llvm test-suite. It also fixes regressions
caused by doing post-RA copy propagation (a separate change to be put up
for review shortly).
Reviewers: junbuml, mcrosier, t.p.northover, qcolombet, MatzeB
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D30113
llvm-svn: 295863
LLVM CodeGen emits references to external symbols that are never declared in
LLVM IR level, so they have no declared signature. However, WebAssembly requires
all functions be declared with signatures. This patch adds a table for providing
signatures for known runtime libcalls that will be used in subsequent patches to
emit declarations for such functions.
llvm-svn: 295857
Minor optimization, don't create temporary mask APInts that are just going to be OR'd into the accumulate masks - insert directly instead.
llvm-svn: 295848
The pass tries to fix a spill of LR that turns out to be unnecessary.
So it removes the tPOP but forgets to remove tPUSH.
This causes the stack be misaligned upon returning the function.
Thus, remove the tPUSH as well in this case.
Differential Revision: https://reviews.llvm.org/D30207
llvm-svn: 295816
This patch adds missing sched classes for Thumb2 instructions.
This has been missing so far, and as a consequence, machine
scheduler models for individual sub-targets have tended to
be larger than they needed to be. These patches should help
write schedulers better and faster in the future
for ARM sub-targets.
Reviewer: Diana Picus
Differential Revision: https://reviews.llvm.org/D29953
llvm-svn: 295811
This patch introduces new X86ISD::FMAXS and X86ISD::FMINS opcodes. The legacy intrinsics now lower to this node. As do the AVX-512 masked intrinsics when the rounding mode is CUR_DIRECTION.
I've merged a copy of the tablegen multiclass avx512_fp_scalar into avx512_fp_scalar_sae. avx512_fp_scalar still needs to support CUR_DIRECTION appearing as a rounding mode for X86ISD::FADD_ROUND and others.
Differential revision: https://reviews.llvm.org/D30186
llvm-svn: 295810
This just adds the basic skeleton for supporting a new object file format.
All of the actual encoding will be implemented in followup patches.
Differential Revision: https://reviews.llvm.org/D26722
llvm-svn: 295803
Change implementation to use max instead of add.
min/max/med3 do not flush denormals regardless of the mode,
so it is OK to use it whether or not they are enabled.
Also allow using clamp with f16, and use knowledge
of dx10_clamp.
llvm-svn: 295788
Original code only used vector loads/stores for explicit vector arguments.
It could also do more loads/stores than necessary (e.g v5f32 would
touch 8 f32 values). Aggregate types were loaded one element at a time,
even the vectors contained within.
This change attempts to generalize (and simplify) parameter space
loads/stores so that vector loads/stores can be used more broadly.
Functionality of the patch has been verified by compiling thrust
test suite and manually checking the differences between PTX
generated by llvm with and without the patch.
General algorithm:
* ComputePTXValueVTs() flattens input/output argument into a flat list
of scalars to load/store and returns their types and offsets.
* VectorizePTXValueVTs() uses that data to create vectorization plan
which returns an array of flags marking boundaries of vectorized
load/stores. Scalars are represented as 1-element vectors.
* Code that generates loads/stores implements a simple state machine
that constructs a vector according to the plan.
Differential Revision: https://reviews.llvm.org/D30011
llvm-svn: 295784
Before frame offsets are calculated, try to eliminate the
frame indexes used by SGPR spills. Then we can delete them
after.
I think for now we can be sure that no other instruction
will be re-using the same frame indexes. It should be easy
to notice if this assumption ever breaks since everything
asserts if it tries to use a dead frame index later.
The unused emergency stack slot seems to still be left behind,
so an additional 4 bytes is still wasted.
llvm-svn: 295753
Summary:
Rework the code that was sinking/duplicating (icmp and, 0) sequences
into blocks where they were being used by conditional branches to form
more tbz instructions on AArch64. The new code is more general in that
it just looks for 'and's that have all icmp 0's as users, with a target
hook used to select which subset of 'and' instructions to consider.
This change also enables 'and' sinking for X86, where it is more widely
beneficial than on AArch64.
The 'and' sinking/duplicating code is moved into the optimizeInst phase
of CodeGenPrepare, where it can take advantage of the fact the
OptimizeCmpExpression has already sunk/duplicated any icmps into the
blocks where they are used. One minor complication from this change is
that optimizeLoadExt needed to be updated to always mark 'and's it has
determined should be in the same block as their feeding load in the
InsertedInsts set to avoid an infinite loop of hoisting and sinking the
same 'and'.
This change fixes a regression on X86 in the tsan runtime caused by
moving GVNHoist to a later place in the optimization pipeline (see
PR31382).
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: aemerson, mcrosier, sebpop, llvm-commits
Differential Revision: https://reviews.llvm.org/D28813
llvm-svn: 295746
PC isn't allowed in the source operand of t2MOVr, so change the register class
to one without PC. SP handling is slightly trickier and changes depending on if
we're in ARMv8, so do that in checkTargetMatchPredicate.
Differential Revision: https://reviews.llvm.org/D30199
llvm-svn: 295732
This matches what is already done during shuffle lowering and helps prevent the need for a zero-vector in cases where shuffles match both patterns.
llvm-svn: 295723
Summary:
Sandy Bridge and later CPUs have better throughput using a SHLD to implement rotate versus the normal rotate instructions. Additionally it saves one uop and avoids a partial flag update dependency.
This patch implements this change on any Sandy Bridge or later processor without BMI2 instructions. With BMI2 we will use RORX as we currently do.
Reviewers: zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30181
llvm-svn: 295697
Pull out repeated code for extraction index operand and source vector value type.
Use isNullConstant helper to check for zero extraction index.
llvm-svn: 295670
There used to be a check in the IRTranslator that prevented us from having to
deal with atomic loads/stores. That check has been removed in r294993 and the
AArch64 backend was updated accordingly. This commit does the same thing for the
ARM backend.
In general, in the ARM backend we introduce fences during the atomic expand
pass, so we don't have to worry about atomics, *except* for the 32-bit ARMv8
target, which handles atomics more like AArch64. Since we don't want to worry
about that yet, just bail out of instruction selection if we find any atomic
loads.
llvm-svn: 295662
Its more profitable to go through memory (1 cycles throughput)
than using VMOVD + VPERMV/PSHUFB sequence ( 2/3 cycles throughput) to implement EXTRACT_VECTOR_ELT with variable index.
IACA tool was used to get performace estimation (https://software.intel.com/en-us/articles/intel-architecture-code-analyzer)
For example for var_shuffle_v16i8_v16i8_xxxxxxxxxxxxxxxx_i8 test from vector-shuffle-variable-128.ll I get 26 cycles vs 79 cycles.
Removing the VINSERT node, we don't need it any more.
Differential Revision: https://reviews.llvm.org/D29690
llvm-svn: 295660
Use tablegen to autogenerate isBranchtarget helper functions. This is a cleanup
that removes almost identical functions that differ only in a few constants.
Differential Revision: https://reviews.llvm.org/D30160
llvm-svn: 295649
Add WIG value to all of AVX instructions which ignore the W-bit in their encoding, instead of giving them the default value of 0.
This patch is needed for a follow up work on EVEX2VEX pass (replacing EVEX encoded instructions with their corresponding VEX version when possible).
Differential Revision: https://reviews.llvm.org/D29876
llvm-svn: 295643
Replaces existing approach that could only search BUILD_VECTOR nodes.
Requires getTargetConstantBitsFromNode to discriminate cases with all/partial UNDEF bits in each element - this should also be useful when we get around to supporting getTargetShuffleMaskIndices with UNDEF elements.
llvm-svn: 295613
As discussed on D27692, this permits another domain to be used to combine a shuffle at high depths.
We currently set the required depth at 4 or more combined shuffles, this is probably too high for most targets but is a good starting point and already helps avoid a number of costly variable shuffles.
llvm-svn: 295608
Add the infrastructure to flag whether float and/or int domains are permitable.
A future patch will enable domain crossing based off shuffle depth and the value types of the source vectors.
llvm-svn: 295604
The instructions are marked commutable, but without special handling we don't get the immediate correct.
While here also remove the masked memory forms that aren't commutable.
llvm-svn: 295602
This requires some instructions to be renamed to move the Y earlier in the instruction name. The new names are more consistent with other instructions.
llvm-svn: 295579
It seems we were already upgrading 128-bit VPCMOV, but the intrinsic was still defined and being used in isel patterns. While I was here I also simplified the tablegen multiclasses.
llvm-svn: 295564
When promoting the Load of a Store-Load pair to a COPY all kill flags
between the store and the load need to be cleared.
rdar://30402435
Differential Revision: https://reviews.llvm.org/D30110
llvm-svn: 295512
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
This is resubmit of r292680, which was reverted by r293092. The internal application failures were actually caused by a source code bug.
llvm-svn: 295506
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
Removed the HasT2ExtractPack feature and replaced its references
with HasDSP. This then allows the Thumb2 extend instructions to be
selected for ARMv8M +dsp. These instruction descriptions have also
been refactored and more target tests have been added for their isel.
Differential Revision: https://reviews.llvm.org/D29623
llvm-svn: 295452
Add some asserts to make sure we're using the mappings that we think we're
using. This is to keep us from accidentally breaking functionality while moving
to TableGen'erated mappings.
llvm-svn: 295441
Start using the Subtarget to make decisions about what's legal. In particular,
we only mark floating point operations as legal if we have VFP2, which is
something we should've done from the very start.
llvm-svn: 295439
The original commit was reverted in r283329 due to a miscompile in
Chromium. That turned out to be the same issue as PR31257, which was
fixed in r295262.
llvm-svn: 295357
Defining nodes should not alias with one another, while clobbering
nodes can. When pushing defs on stacks, push clobbers first, link
non-clobbering defs, then push the defs.
The data flow in a statement is now: uses -> clobbers -> defs.
llvm-svn: 295356
The existing code always saves the xmm registers for 64-bit targets even if the
target doesn't support SSE (which is common for kernels). Thus, the compiler
inserts movaps instructions which lead to CPU exceptions when an interrupt
handler is invoked.
This commit fixes this bug by returning a register set without xmm registers
from getCalleeSavedRegs and getCallPreservedMask for such targets.
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D29959
llvm-svn: 295347
Regression test neon-diagnostics.s needed changing because it now
produces a more specific diagnostic about the immediate ranges. One
change in the expected error message is not obvious, but there multiple
candidate and it happens to pick the immediate diagnostic.
Differential Revision: https://reviews.llvm.org/D29939
llvm-svn: 295331
Since they're only used for passing around double precision floating point
values into the general purpose registers, we'll lower them to VMOVDRR and
VMOVRRD.
llvm-svn: 295310
For now we just mark them as legal all the time and let the other passes bail
out if they can't handle it. In the future, we'll want to move more of the
brains into the legalizer.
llvm-svn: 295300
For the hard float calling convention, we just use the D registers.
For the soft-fp calling convention, we use the R registers and move values
to/from the D registers by means of G_SEQUENCE/G_EXTRACT. While doing so, we
make sure to honor the endianness of the target, since the CCAssignFn doesn't do
that for us.
For pure soft float targets, we still bail out because we don't support the
libcalls yet.
llvm-svn: 295295
The new 512-bit unmasked intrinsics will make it easy to handle these with the SSE/AVX intrinsics in InstCombine where we currently have a TODO.
llvm-svn: 295290
This reverts r294348, which removed support for conditional tail calls
due to the PR above. It fixes the PR by marking live registers as
implicitly used and defined by the now predicated tailcall. This is
similar to how IfConversion predicates instructions.
Differential Revision: https://reviews.llvm.org/D29856
llvm-svn: 295262
Uses a Custom implementation because the slot sizes being a multiple of the
pointer size isn't really universal, even for the architectures that do have a
simple "void *" va_list.
llvm-svn: 295255
Minor performance speedup - if any call to getShuffleScalarElt fails to get a result, don't both calling for the remaining elements as EltsFromConsecutiveLoads will fail anyhow.
llvm-svn: 295235
am_ldrlit diverged from am_brcond in r207105, but kept the OtherVT
operand type. It made sense for branch targets, as those are
represented as MVT::Other in SDAG. But loads operate on pointers.
This shouldn't have an observable effect on any in-tree code, but helps
make the patterns consistent for external users.
llvm-svn: 295229
This patch reverts region's scheduling to the original untouched state
in case if we have have decreased occupancy.
In addition it switches to use TargetRegisterInfo occupancy callback
for pressure limits instead of gradually increasing limits which were
just passed by. We are going to stay with the best schedule so we do
not need to tolerate worsened scheduling anymore.
Differential Revision: https://reviews.llvm.org/D29971
llvm-svn: 295206
Summary:
We don't seem to have great rules on what a valid VBROADCAST node looks like. And as a consequence we end up with a lot of patterns to try to catch everything. We have patterns with scalar inputs, 128-bit vector inputs, 256-bit vector inputs, and 512-bit vector inputs.
As you can see from the things improved here we are currently missing patterns for 128-bit loads being extended to 256-bit before the vbroadcast.
I'd like to propose that VBROADCAST should always take a 128-bit vector type as input. As a first step towards that this patch adds an EXTRACT_SUBVECTOR in front of VBROADCAST when the input is 256 or 512-bits. In the future I would like to add scalar_to_vector around all the scalar operations. And maybe we should consider adding a VBROADCAST+load node to avoid separating loads from the broadcasting operation when the load itself isn't foldable.
This requires an additional change in target shuffle combining to look for the extract subvector and look through it to find the original operand. I'm sure this change isn't perfect but was enough to fix a few test failures that were being caused.
Another interesting thing I noticed is that the changes in masked_gather_scatter.ll show cases were we don't remove a useless insert into element 1 before broadcasting element 0.
Reviewers: delena, RKSimon, zvi
Reviewed By: zvi
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D28747
llvm-svn: 295155
This patch corrects the maximum workgroups per CU if we have big
workgroups (more than 128). This calculation contributes to the
occupancy calculation in respect to LDS size.
Differential Revision: https://reviews.llvm.org/D29974
llvm-svn: 295134
This adds MXCSR to the set of recognized registers for X86 targets and updates the instructions that read or write it. I do not intend for all of the various floating point instructions that implicitly use the control bits or update the status bits of this register to ever have that usage modeled by default. However, when constrained floating point modes (such as strict FP exception status modeling or dynamic rounding modes) are enabled, implicit use/def information for MXCSR will be added to those instructions.
Until those additional updates are made this should cause (almost?) no functional changes. Theoretically, this will prevent instructions like LDMXCSR and STMXCSR from being moved past one another, but that should be prevented anyway and I haven't found a case where it is happening now.
Differential Revision: https://reviews.llvm.org/D29903
llvm-svn: 295004
Clean up the implementation of divide macro expansion by getting rid of a
FIXME regarding magic numbers and branch instructions. Match GAS' behaviour
for expansion of ddiv / div in the two and three operand cases. Add the two
operand alias for MIPSR6. Finally, optimize macro expansion cases where the
divisior is the $zero register.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29887
llvm-svn: 294960
Summary:
The attached test case fails with "fatal error: error in backend:
misaligned pc-relative fixup value" as the jump table is misaligned.
The EmitAlignment existed already for ARM and Thumb-1 code, but was
missing for Thumb-2.
The test checks that the fatal error disappears when generating an obj
file, as well as checking the align directive is there when producing an
asm file.
Reviewers: rengolin, grosbach, t.p.northover, jmolloy, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D29650
llvm-svn: 294950
We match a sequence of 3-4 instructions into a tTBB pseudo. One of our checks is that
a particular register in that sequence is killed (so it can be clobbered by the pseudo).
We weren't noticing if an errant MOV or other instruction had infiltrated the
sequence we were walking. If it had, and it defined the register we've already
identified as killed, it makes it live across the tBR_JT and thus unclobberable.
Notice this case and bail out.
llvm-svn: 294949
When generating a floating point comparison we currently unconditionally
generate VCMPE. This has the sideeffect of setting the cumulative Invalid
bit in FPSCR if any of the operands are QNaN.
It is expected that use of a relational predicate on a QNaN value should
raise Invalid. Quoting from the C standard:
The relational and equality operators support the usual mathematical
relationships between numeric values. For any ordered pair of numeric
values exactly one of relationships the less, greater, equal and is true.
Relational operators may raise the floating-point exception when argument
values are NaNs.
The standard doesn't explicitly state the expectation for equality operators,
but the implication and obvious expectation is that equality operators
should not raise Invalid on a QNaN input, as those predicates are wholly
defined on unordered inputs (to return not equal).
Therefore, add a new operand to ARMISD::FPCMP and FPCMPZ indicating if
QNaN should raise Invalid, and pipe that through to TableGen.
llvm-svn: 294945
We now detect that both the extract and insert indices are non-zero and convert to a shuffle. This will be lowered as a blend for 256-bit vectors or as a vshuf operations for 512-bit vectors.
llvm-svn: 294931
This results in the simplifications inside of getNode running while we're legalizing nodes popped off the worklist during the final DAG combine. This basically makes a DAG combine like operation occur during this legalize step, but we don't handle something quite the same way. I think we don't recursively added the removed nodes to the DAG combiner worklist.
llvm-svn: 294929
I can't prove that we can select this instruction or the AVX/SSE version, but I'm adding it for consistency for now so I can continue matching the load folding tables.
llvm-svn: 294907
The target shuffle match function arguments were using the term 'Ops' but the function names referred to them as 'Inputs' - use 'Inputs' consistently.
llvm-svn: 294900
Initial 256-bit vector support - 512-bit support requires extra checks for AVX512BW support (PMOVZXBW) that will be handled in a future patch.
llvm-svn: 294896
Removes duplicate constant extraction code in getTargetShuffleMaskIndices.
getTargetConstantBitsFromNode - adds support for VZEXT_MOVL(SCALAR_TO_VECTOR) and fail if the caller doesn't support undef bits.
llvm-svn: 294856
Seems the execution dependency pass likes to use FP instructions when most of the consuming code is integer if a vextractf128 instruction produced the register. Without AVX2 we don't have the corresponding integer instruction available.
This patch suppresses the domain on these instructions to GenericDomain if AVX2 is not supported so that they are ignored by domain fixing. If AVX2 is supported we'll report the correct domain and allow them to switch between integer and fp.
Overall I think this produces better results in the modified test cases.
llvm-svn: 294824
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Teach the cost model to consider f16 interleaved operations as
expensive. Otherwise, we are all but guaranteed to end up with
a large block of scalarized vector code.
llvm-svn: 294819
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Reject f16 interleaved accesses. If we try to emit the f16 intrinsics,
we'll just end up with a selection failure.
llvm-svn: 294818
Summary:
powerpc64 big-endian is not supported, but I believe that most logic can
be shared, except for xray_powerpc64.cc.
Also add a function InvalidateInstructionCache to xray_util.h, which is
copied from llvm/Support/Memory.cpp. I'm not sure if I need to add a unittest,
and I don't know how.
Reviewers: dberris, echristo, iteratee, kbarton, hfinkel
Subscribers: mehdi_amini, nemanjai, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29742
llvm-svn: 294781
Since r274013, we've been looking through bitcasts on broadcast inputs.
In the scalar-folding case (from a load, build_vector, or sc2vec),
the input type didn't matter, as we'd simply bitcast the resulting
scalar back.
However, when broadcasting a 128-bit-lane-aligned element, we create an
EXTRACT_SUBVECTOR. Use proper types, by creating an extract_subvector
of the original input type.
llvm-svn: 294774
In the encoding of system registers in the M-class MSR instruction the mask bits
should be 2 for registers that don't take a _<bits> qualifier (the instruction
is unpredictable otherwise), and should also be 2 if the register takes a
_<bits> qualifier but it's not present as no _<bits> is an alias for _nzcvq.
Differential Revision: https://reviews.llvm.org/D29828
llvm-svn: 294762
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
In some cases we call getTargetConstantBitsFromNode for nodes that haven't been lowered from BUILD_VECTOR yet
Note: We're getting very close to being able to move most of the constant extraction code from getTargetShuffleMaskIndices into getTargetConstantBitsFromNode
llvm-svn: 294746
until we can get better TargetMachine::isCompatibleDataLayout to compare - otherwise
we can't code generate existing bitcode without a string equality data layout.
This reverts commit r294702.
llvm-svn: 294709
For other platforms we should find out what they need and likely
make the same change, however, a smaller additional change is easier
for platforms we know have it specified in the ABI. As part of this
rewrite some of the handling in the backends for data layout and update
a bunch of testcases.
Based on a patch by Simonas Kazlauskas!
llvm-svn: 294702
This change returns empty PSet list for M0 register. Otherwise its
PSet as defined by tablegen is SReg_32. This results in incorrect
register pressure calculation every time an instruction uses M0.
Such uses count as SReg_32 PSet and inadequately increase pressure
on SGPRs.
Differential Revision: https://reviews.llvm.org/D29798
llvm-svn: 294691
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
This requires that we communicate to X86InstrInfo::optimizeCompareInstr
that the second operand is neither a register nor an immediate. The way we
do that is by setting CmpMask to zero.
Note that there were already instructions where the second operand was not a
register nor an immediate, namely X86::SUB*rm, so also set CmpMask to zero
for those instructions. This seems like a latent bug, but I was unable to
trigger it.
Differential Revision: https://reviews.llvm.org/D28621
llvm-svn: 294634
Summary:
Convert all obvious node_begin/node_end and child_begin/child_end
pairs to range based for.
Sending for review in case someone has a good idea how to make
graph_children able to be inferred. It looks like it would require
changing GraphTraits to be two argument or something. I presume
inference does not happen because it would have to check every
GraphTraits in the world to see if the noderef types matched.
Note: This change was 3-staged with clang as well, which uses
Dominators/etc from LLVM.
Reviewers: chandlerc, tstellarAMD, dblaikie, rsmith
Subscribers: arsenm, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D29767
llvm-svn: 294620
In combineOrCmpEqZeroToCtlzSrl, replace "getConstantOperand == 0" by "isNullConstant" to account for floating point constants.
Differential Revision: https://reviews.llvm.org/D29756
llvm-svn: 294588
LowerBuildVectorv16i8/LowerBuildVectorv8i16 insert values into a UNDEF vector if the build vector doesn't contain any zero elements, resulting in register dependencies with a previous use of the register.
This patch attempts to break the register dependency by either always zeroing the vector before hand or (if we're inserting to the 0'th element) by using VZEXT_MOVL(SCALAR_TO_VECTOR(i32 AEXT(Elt))) which lowers to (V)MOVD and performs a similar function. Additionally (V)MOVD is a shorter instruction than PINSRB/PINSRW. We already do something similar for SSE41 PINSRD.
On pre-SSE41 LowerBuildVectorv16i8 we go a little further and use VZEXT_MOVL(SCALAR_TO_VECTOR(i32 ZEXT(Elt))) if the build vector contains zeros to avoid the vector zeroing at the cost of a scalar zero extension, which can probably be brought over to the other cases in a future patch in some cases (load folding etc.)
Differential Revision: https://reviews.llvm.org/D29720
llvm-svn: 294581
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Functions that have a dynamic alloca require a base register which is defined to
be X19 on AArch64 and r6 on ARM. We have defined the swifterror register to be
the same register. Use a different callee save register for swifterror instead:
X21 on AArch64
R8 on ARM
rdar://30433803
llvm-svn: 294551
We mark X0 as preserved by a call that passes the returned parameter.
x0 = ...
fun(x0) // no implicit def of x0
This no longer is valid if we pass the parameter in a different register then
the returned value as is the case with a swiftself parameter (passed in x20).
x20 = ...
fun(x20) // there should be an implict def of x8
rdar://30425845
llvm-svn: 294527
AArch64 has specific instructions to multiply two numbers at double the width
and produce the high part of the result. These can be used to implement LLVM's
mul.with.overflow instructions fairly simply. Helps with C++ operator new[].
llvm-svn: 294519
Implement getRegPressureLimit and getRegPressureSetLimit callbacks in
SIRegisterInfo.
This makes standard converge scheduler to behave almost the same as
GCNScheduler, sometime slightly better sometimes a bit worse.
In gerenal that is also possible to switch GCNScheduler to use these
callbacks instead of getMaxWaves(), which also makes GCNScheduler
slightly better on some tests and slightly worse on another. A big
win is behavior with converge scheduler.
Note, these are used not only by scheduling, but in places like
MachineLICM.
Differential Revision: https://reviews.llvm.org/D29700
llvm-svn: 294518
Summary: This patch is required by D28855, and enables us to rely on CMake's ability to handle out of order target dependencies.
Reviewers: mgorny, chapuni, bryant
Subscribers: llvm-commits, jgosnell
Differential Revision: https://reviews.llvm.org/D28869
llvm-svn: 294514
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
llvm-svn: 294493
Add a register bank for floating point values and select simple instructions
using them (add, copies from GPR).
This assumes that the hardware can cope with a single precision add (VADDS)
instruction, so the legalizer will treat G_FADD as legal and the instruction
selector will refuse to select if the hardware doesn't support it. In the future
we'll want to be more careful about this, and legalize to libcalls if we have to
use soft float.
llvm-svn: 294442
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
They are currently modelled incorrectly (as calls, which clobber
registers, confusing e.g. Machine Copy Propagation).
Reverting until we figure out the proper solution.
llvm-svn: 294348
Summary:
This change allows usage of store instruction for implicit null check.
Memory Aliasing Analisys is not used and change conservatively supposes
that any store and load may access the same memory. As a result
re-ordering of store-store, store-load and load-store is prohibited.
Patch by Serguei Katkov!
Reviewers: reames, sanjoy
Reviewed By: sanjoy
Subscribers: atrick, llvm-commits
Differential Revision: https://reviews.llvm.org/D29400
llvm-svn: 294338
Adds the vnot extended mnemonic for the vnor instruction.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29225
llvm-svn: 294330
vXi8/vXi64 vector shifts are often shifted as vYi16/vYi32 types but we weren't always remembering to bitcast the input.
Tested with a new assert as we don't currently manipulate these shifts enough for test cases to catch them.
llvm-svn: 294308
When constructing global address literals while targeting the RWPI
relocation model. LLVM currently only uses literal pools. If MOVW/MOVT
instructions are available we can use these instead. Beside being more
efficient it allows -arm-execute-only to work with
-relocation-model=RWPI as well.
When we generate MOVW/MOVT for global addresses when targeting the RWPI
relocation model, we need to use base relative relocations. This patch
does the needed plumbing in MC to generate these for MOVW/MOVT.
Differential Revision: https://reviews.llvm.org/D29487
Change-Id: I446786e43a6f5aa9b6a5bb2cd216d60d41c7755d
llvm-svn: 294298
This includes unmasked forms of variable shift and shifting by the lower element of a register.
Still need to do shift by immediate which was not foldable prior to avx512 and all the masked forms.
llvm-svn: 294285
For amdgcn target Clang generates addrspacecast to represent null pointers in private and local address spaces.
In LLVM codegen, the static variable initializer is lowered by virtual function AsmPrinter::lowerConstant which is target generic. Since addrspacecast is target specific, AsmPrinter::lowerConst
This patch overrides AsmPrinter::lowerConstant with AMDGPUAsmPrinter::lowerConstant, which is able to lower the target-specific addrspacecast in the null pointer representation so that -1 is co
Differential Revision: https://reviews.llvm.org/D29284
llvm-svn: 294265
AArch64 was asserting when it was asked to provide a register-bank of a size it
couldn't deal with (in this case an s128 IMPLICIT_DEF). But we want a robust
fallback path so this isn't allowed.
llvm-svn: 294248
We don't handle all cases yet (see arm64-fallback.ll for an example), but this
is enough to cover most common C++ code so it's a good place to start.
llvm-svn: 294247
Changes include:
- Updates to the instruction descriptor flags.
- Improvements to the packet shuffler and checker.
- Updates to the handling of certain relocations.
- Better handling of duplex instructions.
llvm-svn: 294226
When splitting up one store into several in splitStoreSplat we have to
make sure we get the MachinePointerInfo right, otherwise alias
analysis thinks they all store to the same location. This can then
cause invalid scheduling later on.
Differential Revision: https://reviews.llvm.org/D29446
llvm-svn: 294203
Currently we only combine shuffle nodes if they have a single user to prevent us from causing code bloat by splitting the shuffles into several different combines.
We don't take into account that in some cases we will already have combined all the users during recursively calling up the shuffle tree.
This patch keeps a list of all the shuffle nodes that have been combined so far and permits combining of further shuffle nodes if all its users are in that list.
Differential Revision: https://reviews.llvm.org/D29399
llvm-svn: 294183
Previously only the superscalar scheduled expansion of the dla macro for
MIPS64 was implemented. If assembler temporary register is not available
and the optional source register is not the destination register, synthesize
the address using the naive solution of adds and shifts.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29328
llvm-svn: 294182
Similar to what we already do for zero elt insertion, we can quickly rematerialize 'allbits' vectors so to avoid a unnecessary gpr value and insertion into a vector
llvm-svn: 294162
Summary:
Make this interface reusable similarly to std::call_once and std::once_flag interface.
This makes porting LLDB to NetBSD easier as there was in the original approach a portable way to specify a non-static once_flag. With this change translating std::once_flag to llvm::once_flag is mechanical.
Sponsored by <The NetBSD Foundation>
Reviewers: mehdi_amini, labath, joerg
Reviewed By: mehdi_amini
Subscribers: emaste, clayborg
Differential Revision: https://reviews.llvm.org/D29566
llvm-svn: 294143
Similar was already done for several other shuffles in this function.
The test changes are because the old code used explicity zeroing for elements that could have been undef.
While I was here I also changed other shuffle vectors in the same function to use the same input twice instead of creating UNDEF nodes. getVectorShuffle can create the UNDEF for us.
llvm-svn: 294130
Summary:
This patch tablegen-erates the ARM register bank information so that the
static tables added in D27807 no longer need to be maintained.
Depends on D27338
Reviewers: t.p.northover, rovka, ab, qcolombet, aditya_nandakumar
Reviewed By: rovka
Subscribers: aemerson, rengolin, mgorny, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D28567
llvm-svn: 294124
It is sufficient to skip emission of these arguments as we have nothing
to actually pass through the function call.
The AVR-GCC reference has nothing to say about zero-sized arguments,
presumably because C/C++ doesn't support them. This means we don't have
to worry about ABI differences.
llvm-svn: 294119
This has quite positive performance impact according to measurements.
Before previous fixes to limit the optimization that was too high
and blowed compile time and scratch usage, but now this is gone and
we can bump the threshold.
Differential Revision: https://reviews.llvm.org/D29505
llvm-svn: 294032
The .end <symbol> directive for MIPS marks the end of a symbol and sets the
symbol's size. Previously, the corresponding emitDirective handler asserted
that a function's size could be evaluated to an absolute value at that point
in time.
This cannot be done with when directives like .align have been encountered,
instead set the function's size to the corresponding symbolic expression and
let ELFObjectWriter resolve the expression to an absolute value. This avoids
a redundant call to evaluateAsAbsolute.
llvm-svn: 294012
Summary:
The tail call optimisation is performed before register allocation, so
at that point we don't know if LR is being spilt or not. If LR was spilt
to the stack, then we cannot do a tail call optimisation. That would
involve popping back into LR which is not possible in Thumb1 code.
Reviewers: rengolin, jmolloy, rovka, olista01
Reviewed By: olista01
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D29020
llvm-svn: 294000
Exit loop analysis early if suitable private access found.
Do not account for GEPs which are invariant to loop induction variable.
Do not account for Allocas which are too big to fit into register file anyway.
Add option for tuning: -amdgpu-unroll-threshold-private.
Differential Revision: https://reviews.llvm.org/D29473
llvm-svn: 293991
On one test this seems to have given more chance for DAG combine to do other INSERT_SUBVECTOR/EXTRACT_SUBVECTOR combines before the BLENDI was created. Looks like we can still improve more by teaching DAG combine to optimize INSERT_SUBVECTOR/EXTRACT_SUBVECTOR with BLENDI.
llvm-svn: 293944
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
This is the second in the series of patches to enable adding
of machine sched-models for ARM processors easier and compact.
This patch focuses on integer instructions and adds missing
sched definitions.
Reviewers: rovka, rengolin
Differential Revision: https://reviews.llvm.org/D29127
llvm-svn: 293935
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
Merging Load-add-store pattern into a increment op previously dropped
the load's chain from the instructions dependence if the store is
chained to a TokenFactor.
llvm-svn: 293892
It is important to change the ArgInfo's type from pointer to integer, otherwise
the CC assign function won't know what to do. Instead of hacking it up, we use
ComputeValueVTs and introduce some of the helpers that we will need later on for
lowering more complex types.
llvm-svn: 293889
Allow unknown types in TLI.getValueType, otherwise we get asserts for certain
types that we do not support yet (instead of returning that we don't support
them and falling through the normal error path).
llvm-svn: 293888
This is a first attempt at using the MOVMSK instructions to replace all_of/any_of reduction patterns (i.e. an and/or + shuffle chain).
So far this only matches patterns where we are reducing an all/none bits source vector (i.e. a comparison result) but we should be able to expand on this in conjunction with improvements to 'bool vector' handling both in the x86 backend as well as the vectorizers etc.
Differential Revision: https://reviews.llvm.org/D28810
llvm-svn: 293880
This moves creation of SUBV_BROADCAST and merging of adjacent loads that are being inserted together.
This is a step towards removing legalizing of INSERT_SUBVECTOR except for vXi1 cases.
llvm-svn: 293872
The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
Functions matching LDS use to occupancy return results for a workgroup
of 64 workitems. The numbers has to be adjusted for bigger workgroups.
For example a workgroup of size 256 already occupies 4 waves just by
itself. Given that all numbers of LDS use in the compiler are per
workgroup, occupancy shall be multiplied by 4 in this case. Each 64
workitems still limited by the same number, but 4 subrgoups 64 workitems
each can afford 4 times more LDS to get the same occupancy.
In addition change initializes LDS size in the subtarget to a real value
for SI+ targets. This is required since LDS size is a variable in these
calculations.
Differential Revision: https://reviews.llvm.org/D29423
llvm-svn: 293837
The GAS assembler supports the ".set bopt" directive but according
to the sources it doesn't do anything. It's supposed to optimize
branches by filling the delay slot of a branch with it's target.
This patch teaches the MIPS asm parser to accept both and warn in
the case of 'bopt' that the bopt directive is unsupported.
This resolves PR/31841.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 293798
This patch moves some helper functions related to interleaved access
vectorization out of LoopVectorize.cpp and into VectorUtils.cpp. We would like
to use these functions in a follow-on patch that improves interleaved load and
store lowering in (ARM/AArch64)ISelLowering.cpp. One of the functions was
already duplicated there and has been removed.
Differential Revision: https://reviews.llvm.org/D29398
llvm-svn: 293788
These were simply preserving the flags of the original operation,
which was too conservative in most cases and incorrect for mul.
nsw/nuw may be needed for some combines to cleanup messes when
intermediate sext_inregs are introduced later.
Tested valid combinations with alive.
llvm-svn: 293776
DebugInfoDWARFTests is the only user so far which initializes the
MCObjectStreamer without initializing the ASMParser. The MIPS backend
relies on the ASMParser to initialize the MipsABIInfo object and to
update the target streamer with it. This should turn the mips buildbots
green.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D28025
llvm-svn: 293772
The the following instructions:
- LD/LWZ (expanded from sjLj pseudo-instructions)
- LXVL/LXVLL vector loads
- STXVL/STXVLL vector stores
all require G8RC_NO0X class registers for RA.
Differential Revision: https://reviews.llvm.org/D29289
Committed for Lei Huang
llvm-svn: 293769
Add both cores to the target parser and TableGen. Test that eabi
attributes are set correctly for both cores. Additionally, test the
absence and presence of MOVT in Cortex-M23 and Cortex-M33, respectively.
Committed on behalf of Sanne Wouda.
Reviewers : rengolin, olista01.
Differential Revision: https://reviews.llvm.org/D29073
llvm-svn: 293761
For SSE we use fp because of the smaller encoding, but that doesn't apply to AVX. So just do the natural thing so we don't have to explain why we aren't. We can't do this for 256-bit loads/stores since integer loads and stores aren't available in AVX1 so we need fallback patterns since the integer types are legal.
This doesn't affect any tests because execution domain fixing freely converts the instructions anyway. Honestly, we could probably rely on it for the SSE size optimization too.
llvm-svn: 293743
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, sections 4.14 and 4.15.
Differential revision: https://reviews.llvm.org/D28698
llvm-svn: 293739
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, section 4.13, and on Exynos
M1.
Differential revision: https://reviews.llvm.org/D28491
llvm-svn: 293738
This patch moves the class for scheduling adjacent instructions,
MacroFusion, to the target.
In AArch64, it also expands the fusion to all instructions pairs in a
scheduling block, beyond just among the predecessors of the branch at the
end.
Differential revision: https://reviews.llvm.org/D28489
llvm-svn: 293737
x*rsqrt(x) returns NaN for x == 0, whereas 1/rsqrt(x) returns 0, as
desired.
Verified that the particular nvptx approximate instructions here do in
fact return 0 for x = 0.
llvm-svn: 293713
Technically, this is actually changes the expression and the original
assert was "wrong", but since the conjunction is with true, it doesn't
matter in this case.
llvm-svn: 293709
@ABS8 can be applied to symbols which appear as immediate operands to
instructions that have a 8-bit immediate form for that operand. It causes
the assembler to use the 8-bit form and an 8-bit relocation (e.g. R_386_8
or R_X86_64_8) for the symbol.
Differential Revision: https://reviews.llvm.org/D28688
llvm-svn: 293667
Summary:
For some reason instructions are being inserted in the wrong order with some
builds. I'm not sure why this is happening.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D29325
llvm-svn: 293639
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
llvm-svn: 293634
Also add the ability to recognise PINSR(Vex, 0, Idx).
Targets shuffle combines won't replace multiple insertions with a bit mask until a depth of 3 or more, so we avoid codesize bloat.
The unnecessary vpblendw in clearupper8xi16a will be fixed in an upcoming patch.
llvm-svn: 293627
Just adds the vmr (Vector Move Register) mnemonic for the VOR instruction in
the PPC back end.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29133
llvm-svn: 293626
Summary:
This lets us lower to sqrt.approx and rsqrt.approx under more
circumstances.
* Now we emit sqrt.approx and rsqrt.approx for calls to @llvm.sqrt.f32,
when fast-math is enabled. Previously, we only would emit it for
calls to @llvm.nvvm.sqrt.f. (With this patch we no longer emit
sqrt.approx for calls to @llvm.nvvm.sqrt.f; we rely on intcombine to
simplify llvm.nvvm.sqrt.f into llvm.sqrt.f32.)
* Now we emit the ftz version of rsqrt.approx when ftz is enabled.
Previously, we only emitted rsqrt.approx when ftz was disabled.
Reviewers: hfinkel
Subscribers: llvm-commits, tra, jholewinski
Differential Revision: https://reviews.llvm.org/D28508
llvm-svn: 293605
I think this is safe as long as no inputs are known to ever
be nans.
Also add an intrinsic for fmed3 to be able to handle all safe
math cases.
llvm-svn: 293598
For now just port some of the existing NVPTX tests
and from an old HSAIL optimization pass which
approximately did the same thing.
Don't enable the pass yet until more testing is done.
llvm-svn: 293580
- Move DEBUG_TYPE below includes
- Change unknown address space constant to be consistent with other
passes
- Grammar fixes in debug output
llvm-svn: 293567
combineX86ShufflesRecursively can still only handle a maximum of 2 shuffle inputs but everything before it now supports any number of shuffle inputs.
This will be necessary for combining OR(SHUFFLE, SHUFFLE) patterns.
llvm-svn: 293560
Since we have no call support and late linking we can produce code
only for used symbols. This saves compilation time, size of the final
executable, and size of any intermediate dumps.
Run Internalize pass early in the opt pipeline followed by global
DCE pass. To enable it RT can pass -amdgpu-internalize-symbols option.
Differential Revision: https://reviews.llvm.org/D29214
llvm-svn: 293549
This is worse if the original constant is an inline immediate.
This should also be done for 64-bit adds, but requires fixing
operand folding bugs first.
llvm-svn: 293540
Different architectures can have different meaning for flags in the
SHF_MASKPROC mask, so we should always check what the architecture use
before checking the flag.
NFC for now, but will allow fixing the value of an xmos flag.
llvm-svn: 293484
Previously this test case fired an assertion in getNode because we tried to create an insert_subvector with both input types the same size and the index pointing to half the vector width.
llvm-svn: 293446
Replaces an xor+movd/movq with an xorps which will be shorter in codesize, avoid an int-fpu transfer, allow modern cores to fast path the result during decode and helps other combines recognise an all-zero vector.
The only reason I can think of that we'd want to keep scalar_to_vector in this case is to help recognise the upper elts are undef but this doesn't seem to be a problem.
Differential Revision: https://reviews.llvm.org/D29097
llvm-svn: 293438
Support lowering AEABI TLS access (__aeabi_read_tp) with long calls.
This requires adjusting the call sequence to use an indirect call to get
full addressability.
Resolves PR31769!
llvm-svn: 293433
PACKUSWB converts Signed word to Unsigned byte, (the same about DW) and it can't be used for umin+truncate pattern.
AVX-512 VPMOVUS* instructions fit the pattern since they convert Unsigned to Unsigned.
See https://llvm.org/bugs/show_bug.cgi?id=31773
Differential Revision: https://reviews.llvm.org/D29196
llvm-svn: 293431
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
llvm-svn: 293417
Support for barrier synchronization between a subset of threads
in a CTA through one of sixteen explicitly specified barriers.
These intrinsics are not directly exposed in CUDA but are
critical for forthcoming support of OpenMP on NVPTX GPUs.
The intrinsics allow the synchronization of an arbitrary
(multiple of 32) number of threads in a CTA at one of 16
distinct barriers. The two intrinsics added are as follows:
call void @llvm.nvvm.barrier.n(i32 10)
waits for all threads in a CTA to arrive at named barrier #10.
call void @llvm.nvvm.barrier(i32 15, i32 992)
waits for 992 threads in a CTA to arrive at barrier #15.
Detailed description of these intrinsics are available in the PTX manual.
http://docs.nvidia.com/cuda/parallel-thread-execution/#parallel-synchronization-and-communication-instructions
Reviewers: hfinkel, jlebar
Differential Revision: https://reviews.llvm.org/D17657
llvm-svn: 293384
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Coverage/smoke Gfx7/8 tests were committed r292922 but then reverted
by r292974 due to AddressSanitizer failure, which is fixed by this patch.
Tests to be re-committed soon.
llvm-svn: 293338
Summary: Small change to get the FREEP instruction to decode properly.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29193
llvm-svn: 293314
Accomplishes what r292982 was supposed to, which ended up
only really making the necessary test changes.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 293310
With the adjustPassManager interface that is now possible to use
custom early module passes.
Differential Revision: https://reviews.llvm.org/D29189
llvm-svn: 293300
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
The Windows on ARM target uses custom division for normal division as
the backend needs to insert division-by-zero checks. However, it is
designed to only handle non-vectorized division. ARM has custom
lowering for vectorized division as that can avoid loading registers
with the values and invoke a division routine for each one, preferring
to lower using NEON instructions. Fall back to the custom lowering for
the NEON instructions if we encounter a vectorized division.
Resolves PR31778!
llvm-svn: 293259
This is an attempt to fix the win7 bot that does not seem to be very
good at infering the type when it gets used in an initiliazer list.
llvm-svn: 293246
Summary: Refine floating point SQRT and DIV with accurate latency information.
Reviewers: mcrosier
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D29191
llvm-svn: 293204
1) Explicitly sets mayLoad/mayStore property in the tablegen files on load/store
instructions.
2) Updated the flags on a number of intrinsics indicating that they write
memory.
3) Added SDNPMemOperand flags for some target dependent SDNodes so that they
propagate their memory operand
Review: https://reviews.llvm.org/D28818
llvm-svn: 293200
This change introduces adjustPassManager target callback giving a
target an opportunity to tweak PassManagerBuilder before pass
managers are populated.
This generalizes and replaces addEarlyAsPossiblePasses target
callback. In particular that can be used to add custom passes to
extension points other than EP_EarlyAsPossible.
Differential Revision: https://reviews.llvm.org/D28336
llvm-svn: 293189
Summary:
This patch provides more staging for tail calls in XRay Arm32 . When the logging part of XRay is ready for tail calls, its support in the core part of XRay Arm32 may be as easy as changing the number passed to the handler from 1 to 2.
Coupled patch:
- https://reviews.llvm.org/D28674
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson, rengolin, dberris
Differential Revision: https://reviews.llvm.org/D28673
llvm-svn: 293185
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
And teach shouldAssumeDSOLocal that ppc has no copy relocations.
The resulting code handle a few more case than before. For example, it
knows that a weak symbol can be resolved to another .o file, but it
will still be in the main executable.
llvm-svn: 293180
Pulled out code that removed unused inputs from a target shuffle mask into a helper function to allow it to be reused in a future commit.
llvm-svn: 293175
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
Add support for loading i1, i8 and i16 arguments from the stack, with or without
the ABI extension flags.
When the ABI extension flags are present, we load a 4-byte value, otherwise we
preserve the size of the load and let the instruction selector replace it with a
LDRB/LDRH. This generates the same thing as DAGISel.
Differential Revision: https://reviews.llvm.org/D27803
llvm-svn: 293163
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
This reverts commit r292680. It is causing significantly worse
performance and test timeouts in our internal builds. I have already
routed reproduction instructions your way.
llvm-svn: 293092
Summary:
This patch prepares more for tail call support in XRay. Until the logging part supports tail calls, this is just staging, so it seems LLVM part is mostly ready with this patch.
Related: https://reviews.llvm.org/D28948 (compiler-rt)
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson
Differential Revision: https://reviews.llvm.org/D28947
llvm-svn: 293080
Change getReservedRegs() to not mark a register as reserved and then
revert that decision in some cases. Motivated by the discussion in
https://reviews.llvm.org/D29056
llvm-svn: 293073
Summary:
Lifetime extension wasn't triggered on the result of BuildMI because the
reference was non-const. However, instead of adding a const, I've
removed the reference entirely as RVO should kick in anyway.
Reviewers: rovka, bkramer
Reviewed By: bkramer
Subscribers: aemerson, rengolin, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29124
llvm-svn: 293059
Add support for:
* i1 add
* i1 function arguments, if passed through registers
* i1 returns, with ABI signext/zeroext
Differential Revision: https://reviews.llvm.org/D27706
llvm-svn: 293035
At the moment, this means supporting the signext/zeroext attribute on the return
type of the function. For function arguments, signext/zeroext should be handled
by the caller, so there's nothing for us to do until we start lowering calls.
Note that this does not include support for other extensions (i8 to i16), those
will be added later.
Differential Revision: https://reviews.llvm.org/D27705
llvm-svn: 293034
Enable the next form (intel style):
"mov <reg64>, <largeImm>"
which is should be available,
where <largeImm> stands for immediates which exceed the range of a singed 32bit integer
Differential Revision: https://reviews.llvm.org/D28988
llvm-svn: 293030
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Leave early ifcvt disabled for now since there are some
shader-db regressions.
This causes some immediate improvements, but could be better.
The cost checking that the pass does is based on critical path
length for out of order CPUs which we do not want so it skips out
on many cases we want.
llvm-svn: 293016
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
Summary:
This lets you select which sort of spilling you want, either s[0:1] or 64-bit loads from s[0:1].
Patch By: Dave Airlie
Reviewers: nhaehnle, arsenm, tstellarAMD
Reviewed By: arsenm
Subscribers: mareko, llvm-commits, kzhuravl, wdng, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D25428
llvm-svn: 293000
The sequence like this:
v_cmpx_le_f32_e32 vcc, 0, v0
s_branch BB0_30
s_cbranch_execnz BB0_30
; BB#29:
exp null off, off, off, off done vm
s_endpgm
BB0_30:
; %endif110
is likely wrong. The s_branch instruction will unconditionally jump
to BB0_30 and the skip block (exp done + endpgm) inserted for
performing the kill instruction will never be executed. This results
in a GPU hang with Star Ruler 2.
The s_branch instruction is added during the "Control Flow Optimizer"
pass which seems to re-organize the basic blocks, and we assume
that SI_KILL_TERMINATOR is always the last instruction inside a
basic block. Thus, after inserting a skip block we just go to the
next BB without looking at the subsequent instructions after the
kill, and the s_branch op is never removed.
Instead, we should remove the unconditional out branches and let
skip the two instructions if the exec mask is non-zero.
This patch fixes the GPU hang and doesn't introduce any regressions
with "make check".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99019
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 292985
This switches to the workaround that HSA defaults to
for the mesa path.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 292982
Regalloc creates COPY instructions which do not formally use VALU.
That results in v_mov instructions displaced after exec mask modification.
One pass which do it is SIOptimizeExecMasking, but potentially it can be
done by other passes too.
This patch adds a pass immediately after regalloc to add implicit exec
use operand to all VGPR copy instructions.
Differential Revision: https://reviews.llvm.org/D28874
llvm-svn: 292956
In order to follow the pattern of the existing 'slow-misaligned-128store'
option, rename the option 'no-quad-ldst-pairs' to 'slow-paired-128'.
llvm-svn: 292954
Summary:
This is in keeping with LLVM convention. The classes are InstPrinters, but the library is ${target}AsmPrinter.
This patch is in response to bryant pointing out to me that Lanai was the only backend deviating from convention here. Thanks!
Reviewers: jpienaar, bryant
Subscribers: mgorny, jgosnell, llvm-commits
Differential Revision: https://reviews.llvm.org/D29043
llvm-svn: 292953
The GeneralShuffle::add() method used to have an assert that made sure that
source elements were at least as big as the destination elements. This was
wrong, since it is actually expected that an EXTRACT_VECTOR_ELT node with a
smaller source element type than the return type gets extended.
Therefore, instead of asserting this, it is just checked and if this is the
case 'false' is returned from the GeneralShuffle::add() method. This case
should be very rare and is not handled further by the backend.
Review: Ulrich Weigand.
llvm-svn: 292888
When a register like R1 is reserved, X1 should be reserved as well. This
was already done "manually" when 64bit code was enabled, however using
the markSuperRegs() function on the base register is more convenient and
allows to use the checksAllSuperRegsMarked() function even in 32bit mode
to avoid accidental breakage in the future.
This is also necessary to allow https://reviews.llvm.org/D28881
Differential Revision: https://reviews.llvm.org/D29056
llvm-svn: 292870
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
When calculating kills, a register may be considered live because a part
of it is live, but if there is a use of that (whole) register, the whole
register (and its subregisters) need to be added to the live set.
llvm-svn: 292845
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
This is a series of patches to enable adding of machine sched
models for ARM processors easier and compact. They define new
sched-readwrites for groups of ARM instructions. This has been
missing so far, and as a consequence, machine scheduler models
for individual sub-targets have tended to be larger than they
needed to be.
The current patch focuses on floating-point instructions.
Reviewers: Diana Picus (rovka), Renato Golin (rengolin)
Differential Revision: https://reviews.llvm.org/D28194
llvm-svn: 292825
Vector immediate load instructions should have the isAsCheapAsAMove, isMoveImm
and isReMaterializable flags set. With them, these instruction will get
hoisted out of loops.
Review: Ulrich Weigand
llvm-svn: 292790
Re-Commit r292543 with a fix for the situation when the chain end is
MBB.end().
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292705
Summary:
Specifically, we upgrade llvm.nvvm.:
* brev{32,64}
* clz.{i,ll}
* popc.{i,ll}
* abs.{i,ll}
* {min,max}.{i,ll,u,ull}
* h2f
These either map directly to an existing LLVM target-generic
intrinsic or map to a simple LLVM target-generic idiom.
In all cases, we check that the code we generate is lowered to PTX as we
expect.
These builtins don't need to be backfilled in clang: They're not
accessible to user code from nvcc.
Reviewers: tra
Subscribers: majnemer, cfe-commits, llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D28793
llvm-svn: 292694
Summary:
DADToDAG has access to TargetLowering, but not vice versa, so this is
the more general location for these functions.
NFC
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28795
llvm-svn: 292693
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
llvm-svn: 292680
WebAssembly varargs functions use a significantly different ABI than
non-varargs functions, and the current code in
WebAssemblyFixFunctionBitcasts doesn't handle that difference. For now,
just avoid creating wrapper functions in the presence of varargs.
llvm-svn: 292645
Kill flags need to be updated correctly when moving stores up/down to
form store pair instructions.
Those invalid flags have been ignored before but as of r290014 they are
recognized when using -mllvm -verify-machineinstrs.
Also simplifies test/CodeGen/AArch64/ldst-opt-dbg-limit.mir, renames it
to ldst-opt.mir test and adds a new tests for this change.
Differential Revision: https://reviews.llvm.org/D28875
llvm-svn: 292625
This patch fixes debug information for __thread variable on Mips
using .dtprelword and .dtpreldword directives.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D28770
llvm-svn: 292624
We also want to optimise tests like this: return a*b == 0. The MULS
instruction is flag setting, so we don't need the CMP instruction but can
instead branch on the result of the MULS. The generated instructions sequence
for this example was: MULS, MOVS, MOVS, CMP. The MOVS instruction load the
boolean values resulting from the select instruction, but these MOVS
instructions are flag setting and were thus preventing this optimisation. Now
we first reorder and move the MULS to before the CMP and generate sequence
MOVS, MOVS, MULS, CMP so that the optimisation could trigger. Reordering of the
MULS and MOVS is safe to do because the subsequent MOVS instructions just set
the CPSR register and don't use it, i.e. the CPSR is dead.
Differential Revision: https://reviews.llvm.org/D27990
llvm-svn: 292608
Hunt down some of the places where we use bare addReg(0) or addImm(AL).addReg(0)
and replace with add(condCodeOp()) and add(predOps()). This should make it
easier to understand what those operands represent (without having to look at
the definition of the instruction that we're adding to).
Differential Revision: https://reviews.llvm.org/D27984
llvm-svn: 292587
Inline spiller can decide to move a spill as early as possible in the basic block.
It will skip phis and label, but we also need to make sure it skips instructions
in the basic block prologue which restore exec mask.
Added isPositionLike callback in TargetInstrInfo to detect instructions which
shall be skipped in addition to common phis, labels etc.
Differential Revision: https://reviews.llvm.org/D27997
llvm-svn: 292554
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292543
This instruction is missing from LiveIntervals.
I'm not aware of any problems because of this though.
Differential Revision: https://reviews.llvm.org/D28879
llvm-svn: 292521
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292516
As discussed on D28219 - it is profitable to combine trunc(binop (s/zext(x), s/zext(y)) to binop(trunc(s/zext(x)), trunc(s/zext(y))) assuming the trunc(ext()) will simplify further
llvm-svn: 292493
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
Summary:
Currently we expand and scalarize these operations, but I think we should be able to implement ADD/SUB with KXOR and MUL with KAND.
We already do this for scalar i1 operations so I just extended it to vectors of i1.
Reviewers: zvi, delena
Reviewed By: delena
Subscribers: guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D28888
llvm-svn: 292474
For -(x + y) -> (-x) + (-y), if x == -y, this would
change the result from -0.0 to 0.0. Since the fma/fmad
combine is an extension of this problem it also
applies there.
fmul should be fine, and I don't think any of the unary
operators or conversions should be a problem either.
llvm-svn: 292473
There's no neg.f16 instruction, so negation has to
be done via subtraction from zero.
Differential Revision: https://reviews.llvm.org/D28876
llvm-svn: 292452
r291670 doesn't crash on the original testcase from PR31589,
but it crashes on a slightly more complex one.
PR31589 has the new reproducer.
llvm-svn: 292444
ARM seems to prefer that long literals be formed from their little end in
order to promote the fusion of the instrs pairs MOV/MOVK and MOVK/MOVK on
Cortex A57 and others (v. "Cortex A57 Software Optimisation Guide", section
4.14).
Differential revision: https://reviews.llvm.org/D28697
llvm-svn: 292422
Limit register coalescer by not allowing it to artificially increase
size of registers beyond dword. Such super-registers are in fact
register sequences and not distinct HW registers.
With more super-regs we would need to allocate adjacent registers
and constraint regalloc more than needed. Moreover, our super
registers are overlapping. For instance we have VGPR0_VGPR1_VGPR2,
VGPR1_VGPR2_VGPR3, VGPR2_VGPR3_VGPR4 etc, which complicates registers
allocation even more, resulting in excessive spilling.
Differential Revision: https://reviews.llvm.org/D28782
llvm-svn: 292413
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
Summary:
In this function, virtual registers can be introduced (for example
through calls to emitThumbRegPlusImmInReg). doScavengeFrameVirtualRegs
will replace those virtual registers with concrete registers later on
in PrologEpilogInserter, which sets NoVRegs again.
This patch fixes the Codegen/Thumb/segmented-stacks.ll test case which
failed with expensive checks.
https://llvm.org/bugs/show_bug.cgi?id=27484
Reviewers: rnk, bkramer, olista01
Reviewed By: olista01
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D28829
llvm-svn: 292372
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
This patch improves the mul instruction combine function (combineMul)
by adding new layer of logic.
In this patch, we are adding the ability to fold (mul x, -((1 << c) -1))
or (mul x, -((1 << c) +1)) into (neg(X << c) -x) or (neg((x << c) + x) respective.
Differential Revision: https://reviews.llvm.org/D28232
llvm-svn: 292358
This reverts commit r292210, as it broke the Thumb buldbot with:
clang-5.0: error: the clang compiler does not support '-fxray-instrument
on thumbv7-unknown-linux-gnueabihf'.
llvm-svn: 292357
During post-RA pseudo expansion, an 'undef' flag of the source operand should
be propagated by emitGRX32Move().
Review: Ulrich Weigand
llvm-svn: 292353
This patch fixes bugzilla 31576 (https://llvm.org/bugs/show_bug.cgi?id=31576).
"data32" instruction prefix was not defined in the llvm.
An exception had to be added to the X86 tablegen and AsmPrinter because both "data16" and "data32" are encoded to 0x66 (but in different modes).
Differential Revision: https://reviews.llvm.org/D28468
llvm-svn: 292352
Summary:
This change also lets us use max.{s,u}16. There's a vague warning in a
test about this maybe being less efficient, but I could not come up with
a case where the resulting SASS (sm_35 or sm_60) was different with or
without max.{s,u}16. It's true that nvcc seems to emit only
max.{s,u}32, but even ptxas 7.0 seems to have no problem generating
efficient SASS from max.{s,u}16 (the casts up to i32 and back down to
i16 seem to be implicit and nops, happening via register aliasing).
In the absence of evidence, better to have fewer special cases, emit
more straightforward code, etc. In particular, if a new GPU has 16-bit
min/max instructions, we want to be able to use them.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28732
llvm-svn: 292304
Summary: Previously we lowered it literally, to shifts and xors.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28722
llvm-svn: 292303
Summary:
Avoid an unnecessary conversion operation when using the result of
ctpop.i32 or ctpop.i16 as an i32, as in both cases the ptx instruction
we run returns an i32.
(Previously if we used the value as an i32, we'd do an unnecessary
zext+trunc.)
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28721
llvm-svn: 292302
Summary:
* Disable "ctlz speculation", which inserts a branch on every ctlz(x) which
has defined behavior on x == 0 to check whether x is, in fact zero.
* Add DAG patterns that avoid re-truncating or re-expanding the result
of the 16- and 64-bit ctz instructions.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D28719
llvm-svn: 292299
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Even with the fix from r291630, this still causes problems. I get
widespread assertion failures in the Swift runtime's WeakRefCount::increment()
function. I sent a reduced testcase in reply to the commit.
llvm-svn: 292242
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292210
Emit error when BPF backend sees a call to a global function or to an external symbol.
The kernel verifier only allows calls to predefined helpers from bpf.h
which are defined in 'enum bpf_func_id'. Such calls in assembler must
look like 'call [1-9]+' where number matches bpf_func_id.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 292204
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292154
Falkor only partially implements the ARMv8.1a extensions, so this patch
refactors the support for the SQRDML[A|S]H instruction into a separate
feature.
Differential Revision: https://reviews.llvm.org/D28681
llvm-svn: 292142
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292128
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
We were frequently checking for a list of types and the different types
conveyed no real information. So lump them together explicitly.
llvm-svn: 292095
Summary:
Previously there were three ways to inform the NVVMReflect pass whether
you wanted to flush denormals to zero:
* An LLVM command-line option
* Parameters to the NVVMReflect constructor
* Metadata on the module itself.
This change removes the first two, leaving only the third.
The motivation for this change, aside from simplifying things, is that
we want LLVM to be aware of whether it's operating in FTZ mode, so other
passes can use this information. Ideally we'd have a target-generic
piece of metadata on the module. This change moves us in that
direction.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28700
llvm-svn: 292068
These all involve bitcasts around the memory operands. This isn't
something we normally do for isel patterns. I suspect DAG combine should
convert the load type making this unnecessary.
llvm-svn: 292050
VPMACSDQH/VPMACSDQL act as VPADDQ( VPMULDQ( x, y ), z ) - multiply+extending either the odd/even 4i32 input elements and adding to v2i64 accumulator
llvm-svn: 292020
Isel now selects masked move instructions for vselect instead of blendm. But sometimes it beneficial to register allocation to remove the tied register constraint by using blendm instructions.
This also picks up cases where the masked move was created due to a masked load intrinsic.
Differential Revision: https://reviews.llvm.org/D28454
llvm-svn: 292005
We'll now expand AVX512_128_SET0 to an EVEX VXORD if VLX available. Or if its not, but register allocation has selected a non-extended register we will use VEX VXORPS. And if its an extended register without VLX we'll use a 512-bit XOR. Do the same for AVX512_FsFLD0SS/SD.
This makes it possible for the register allocator to have all 32 registers available to work with.
llvm-svn: 292004
Only scalar half-precision operations are supported at the moment.
- Adds general support for 'half' type in NVPTX.
- fp16 math operations are supported on sm_53+ GPUs only
(can be disabled with --nvptx-no-f16-math).
- Type conversions to/from fp16 are supported on all GPU variants.
- On GPU variants that do not have full fp16 support (or if it's disabled),
fp16 operations are promoted to fp32 and results are converted back
to fp16 for storage.
Differential Revision: https://reviews.llvm.org/D28540
llvm-svn: 291956
Previously we'd always lower @llvm.{sin,cos}.f32 to {sin.cos}.approx.f32
instruction even when unsafe FP math was not allowed.
Clang-generated IR is not affected by this as it uses precise sin/cos
from CUDA's libdevice when unsafe math is disabled.
Differential Revision: https://reviews.llvm.org/D28619
llvm-svn: 291936
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
GCC changes the CC between the user-code and the builtins based on the
value of `-target` rather than `-mfloat-abi`. When a HF target is used,
the VFP variant of the AAPCS CC is used. Otherwise, the AAPCS variant
is used. In all cases, the AEABI functions use the AAPCS CC. Adjust
the calling convention based on the target.
Resolves PR30543!
llvm-svn: 291909
Summary:
This allows the function to handle architectures with more than two register banks.
Depends on D27978
Reviewers: ab, t.p.northover, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, aemerson, rengolin, vkalintiris, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27339
llvm-svn: 291902
Use v8i64 variable ASHR instructions if we don't have VLX.
This is a reduced version of D28537 that just adds support for variable shifts - I'll continue with that patch (for just constant/uniform shifts) once I've fixed the type legalization issue in avx512-cvt.ll.
Differential Revision: https://reviews.llvm.org/D28604
llvm-svn: 291901
Summary:
We did lose a little specificity in the assertion messages for the
PartialMappingIdx enumerators in this change but this was necessary to
avoid unnecessary use of 'public:' and we haven't lost anything that
can't be discovered easily in lldb. Once this is tablegen-erated we could
also safely remove the assertions.
Depends on D27976
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, aemerson, rengolin, vkalintiris, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D27978
llvm-svn: 291900
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
For AddDefaultT1CC, we add a new helper t1CondCodeOp, which creates the
appropriate register operand. For AddNoT1CC, we use the existing condCodeOp
helper - we only had two uses of AddNoT1CC, so at this point it's probably not
worth having yet another helper just for them.
Differential Revision: https://reviews.llvm.org/D28603
llvm-svn: 291894
Replace all uses of AddDefaultCC with add(condCodeOp()).
The transformation has been done automatically with a custom tool based on Clang
AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28557
llvm-svn: 291893
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Some shuffles can be lowered to blend mask instruction (VPBLENDMB/VPBLENDMW/VPBLENDMD/VPBLENDMQ) .
In this patch, I added new pattern match for this case.
Reviewers:
1. craig.topper
2. guyblank
3. RKSimon
4. igorb
Differential Revision: https://reviews.llvm.org/D28483
llvm-svn: 291888
These aren't the most interesting set of blendm instructions as the unmasked version isn't useful. We were also missing the B and W forms. I'll add the masked versions of all sizes in a future patch.
llvm-svn: 291885
Emit SHRQ/SHLQ instead of ANDQ with a 64 bit constant mask if the result
is unused and the mask has only higher/lower bits set. For example, with
this patch LLVM emits
shrq $41, %rdi
je
instead of
movabsq $0xFFFFFE0000000000, %rcx
testq %rcx, %rdi
je
This reduces number of instructions, code size and register pressure.
The transformation is applied only for cases where the mask cannot be
encoded as an immediate value within TESTQ instruction.
Differential Revision: https://reviews.llvm.org/D28198
llvm-svn: 291806
64-bit integer division in Intel CPUs is extremely slow, much slower
than 32-bit division. On the other hand, 8-bit and 16-bit divisions
aren't any faster. The only important exception is Atom where DIV8
is fastest. Because of that, the patch
1) Enables bypassing of 64-bit division for Atom, Silvermont and
all big cores.
2) Modifies 64-bit bypassing to use 32-bit division instead of
16-bit one. This doesn't make the shorter division slower but
increases chances of taking it. Moreover, it's much more likely
to prove at compile-time that a value fits 32 bits and doesn't
require a run-time check (e.g. zext i32 to i64).
Differential Revision: https://reviews.llvm.org/D28196
llvm-svn: 291800
Switch some additional library call setup to be table driven. This
makes it more immediately obvious what the library call looks like.
This is important for ARM since the calling conventions for the builtins
change based on the target/libcall name. NFC
llvm-svn: 291789
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
llvm-svn: 291770
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
llvm-svn: 291768
r289653 added a case where `vselect <cond> <vector1> <all-zeros>`
is transformed to:
`vselect xor(cond, DAG.getConstant(1, DL, CondVT) <all-zeros> <vector1>`
This was not aimed to catch cases where Cond is not a vXi1
mask but it does. Moreover, when Cond type is VxiN (N > 1)
then xor(cond, DAG.getConstant(1, DL, CondVT) != NOT(cond).
This patch changes the above to xor with allones, and avoids
entering the case for non-mask Conds.
llvm-svn: 291745
This produces worse code when i16 is legal, mostly
due to combines getting confused by conversions inserted
for uniform 16-bit operations.
llvm-svn: 291717
The new matchers work after legalization to make them simpler, and to avoid
blocking other optimizations.
Differential Revision: https://reviews.llvm.org/D27779
llvm-svn: 291693
A store of an extracted element or a load which gets inserted into a vector,
will be combined into a vector load/store element instruction.
Therefore, isFoldableMemAccessOffset(), which is called by LSR, should
return false in these cases.
Reviewer: Ulrich Weigand
llvm-svn: 291673
DAG patterns optimization: truncate + unsigned saturation supported by VPMOVUS* instructions in AVX-512.
And VPACKUS* instructions on SEE* targets.
Differential Revision: https://reviews.llvm.org/D28216
llvm-svn: 291670
The code emiited by Clang's intrinsics for (v)cvtsi2ss, (v)cvtsi2sd,
(v)cvtsd2ss and (v)cvtss2sd is lowered to a code sequence that includes
redundant (v)movss/(v)movsd instructions. This patch adds patterns for
optimizing these sequences.
Differential revision: https://reviews.llvm.org/D28455
llvm-svn: 291660
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
This was reverted because it would miscompile code where the cmp had
multiple uses. That was due to a deficiency in the existing code, which
was fixed in r291630 (see the PR for details).
This re-commit includes an extra test for the kind of code that got
miscompiled: @test_sub_1_setcc_jcc.
llvm-svn: 291640
We would miscompile the following:
void g(int);
int f(volatile long long *p) {
bool b = __atomic_fetch_add(p, 1, __ATOMIC_SEQ_CST) < 0;
g(b ? 12 : 34);
return b ? 56 : 78;
}
into
pushq %rax
lock incq (%rdi)
movl $12, %eax
movl $34, %edi
cmovlel %eax, %edi
callq g(int)
testq %rax, %rax <---- Bad.
movl $56, %ecx
movl $78, %eax
cmovsl %ecx, %eax
popq %rcx
retq
because the code failed to take into account that the cmp has multiple
uses, replaced one of them, and left the other one comparing garbage.
llvm-svn: 291630
Summary:
Previously if you had
* a function with the fast-math-enabled attr, followed by
* a function without the fast-math attr,
the second function would inherit the first function's fast-math-ness.
This means that mixing fast-math and non-fast-math functions in a module
was completely broken unless you explicitly annotated every
non-fast-math function with "unsafe-fp-math"="false". This appears to
have been broken since r176986 (March 2013), when the resetTargetOptions
function was introduced.
This patch tests the correct behavior as best we can. I don't think I
can test FPDenormalMode and NoTrappingFPMath, because they aren't used
in any backends during function lowering. Surprisingly, I also can't
find any uses at all of LessPreciseFPMAD affecting generated code.
The NVPTX/fast-math.ll test changes are an expected result of fixing
this bug. When FMA is disabled, we emit add as "add.rn.f32", which
prevents fma combining. Before this patch, fast-math was enabled in all
functions following the one which explicitly enabled it on itself, so we
were emitting plain "add.f32" where we should have generated
"add.rn.f32".
Reviewers: mkuper
Subscribers: hfinkel, majnemer, jholewinski, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28507
llvm-svn: 291618
The original code considered only v2i64 as slow for this feature. This patch
consider all 128-bit long vector types as slow candidates.
In internal tests, extending this feature to all 128-bit vector types
resulted in an overall improvement of 1% on Exynos M1.
Differential revision: https://reviews.llvm.org/D27998
llvm-svn: 291616
When we collect 2 uses of a function in FindUses and then RAUW when we
visit the first, we end up visiting the wrapper (because the second was
RAUW'd). We still want to use RAUW instead of just Use->set() because
it has special handling for Constants, so this patch just ensures that
only one use of each constant is added to the work list.
Differential Revision: https://reviews.llvm.org/D28504
llvm-svn: 291603
This patch fix PR31351: https://llvm.org/bugs/show_bug.cgi?id=31351
1. This patch adds new type of shuffle lowering
2. We can use the expand instruction, When the shuffle pattern is as following:
{ 0*a[0]0*a[1]...0*a[n] , n >=0 where a[] elements in a ascending order}.
Reviewers: 1. igorb
2. guyblank
3. craig.topper
4. RKSimon
Differential Revision: https://reviews.llvm.org/D28352
llvm-svn: 291584
The usage of some MIPS MSA instrinsics that took immediates could crash LLVM
during lowering. This patch addresses that behaviour. Crucially this patch
also makes the use of intrinsics with out of range immediates as producing an
internal error.
The ld,st instrinsics would trigger an assertion failure for MIPS64 as their
lowering would attempt to add an i32 offset to a i64 pointer.
Reviewers: vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D25438
llvm-svn: 291571
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
A previous commit was missing the test case and had another differential
in it.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291566
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291556
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
For i16 zeroext arguments when i16 was a legal type, the
known bits information from the truncate was lost. Insert
a zeroext so the known bits optimizations work with the 32-bit
loads.
Fixes code quality regressions vs. SI in min.ll test.
llvm-svn: 291461
Use the existing AVX2 v8i16 vector shift lowering for v16i8 (extending to v16i32) on AVX512 targets and v32i8 (extending to v32i16) on AVX512BW targets.
Cost model updates to follow.
llvm-svn: 291451
Use the existing AVX2 v8i16 vector shift lowering for v16i16 on AVX512 targets (AVX512BW will have already have lowered with vpsravw).
Cost model updates to follow.
llvm-svn: 291445
I noticed this problem as part of the ongoing attempt to canonicalize min/max ops in IR.
The debug output shows nodes like this:
t4: i32 = xor t2, Constant:i32<-1>
t21: i8 = setcc t4, Constant:i32<0>, setlt:ch
t14: i32 = select t21, t4, Constant:i32<-1>
And because the select is holding onto the t4 (xor) node while EmitTest creates a new
x86-specific xor node, the lowering results in:
t4: i32 = xor t2, Constant:i32<-1>
t25: i32,i32 = X86ISD::XOR t2, Constant:i32<-1>
t28: i32,glue = X86ISD::CMOV Constant:i32<-1>, t4, Constant:i8<15>, t25:1
Differential Revision: https://reviews.llvm.org/D28374
llvm-svn: 291392
The 'fast' costs should only work for shifts by uniform constants (uniform non-constant are lowered using the slow default implementation).
Logical shifts were not taking into account that we must mask the psrlw result, so the costs needed to be doubled.
Added missing AVX2/AVX512BW costs as well.
llvm-svn: 291391
We should probably teach the two address instruction pass to turn masked moves into BLENDM when its beneficial to the register allocator.
llvm-svn: 291371
All but (v2f64 broadcast f64) are handled with VBROADCAST instructions. The v2f64 version can be handled with VMOVDDUP.
We may want to consider converting to BLENDM instructions in the two address instruction pass if its beneficial to register allocation.
llvm-svn: 291369
Gracefully leave code that performs function-pointer bitcasts implying
non-trivial pointer conversions alone, rather than aborting, since it's
just undefined behavior.
llvm-svn: 291326
WebAssembly requires caller and callee signatures to match exactly. In LLVM,
there are a variety of circumstances where signatures may be mismatched in
practice, and one can bitcast a function address to another type to call it
as that type. This patch adds a pass which replaces bitcasted function
addresses with wrappers to replace the bitcasts.
This doesn't catch everything, but it does match many common cases.
llvm-svn: 291315
Re-apply r288561: This time with a fix where the ADDs that are part of a
3 instruction LOH would not invalidate the "LastAdrp" state. This fixes
http://llvm.org/PR31361
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
This reverts commit 9e6cedb0a4f14364d6511597a9160305e7d34493.
llvm-svn: 291266
Summary:
For instructions such as PSLLW/PSLLD/PSLLQ a variable shift amount may be passed in an XMM register.
The lower 64-bits of the register are evaluated to determine the shift amount.
This patch improves the construction of the vector containing the shift amount.
Reviewers: craig.topper, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28353
llvm-svn: 291120
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. Unfortunately, because of the way
that the ABI works, we need to generate code as if we supported interposition
whenever the linker might insert stubs for the purpose of supporting it.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 291003
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: aprantl, MatzeB, mkuper
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290955
Replacing the memory operand in the intrinsic versions of the comis/ucomis instrucions from f128mem to ssmem/sdmem accordingly.
Differential Revision: https://reviews.llvm.org/D28138
llvm-svn: 290948
In some cases its more efficient to combine TRUNC( BINOP( X, Y ) ) --> BINOP( TRUNC( X ), TRUNC( Y ) ) if the binop is legal for the truncated types.
This is true for vector integer multiplication (especially vXi64), as well as ADD/AND/XOR/OR in cases where we only need to truncate one of the inputs at runtime (e.g. a duplicated input or an one use constant we can fold).
Further work could be done here - scalar cases (especially i64) could often benefit (if we avoid partial registers etc.), other opcodes, and better analysis of when truncating the inputs reduces costs.
I have considered implementing this for all targets within the DAGCombiner but wasn't sure we could devise a suitable cost model system that would give us the range we need.
Differential Revision: https://reviews.llvm.org/D28219
llvm-svn: 290947
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
X86 target does not provide any target specific cost calculation for interleave patterns.It uses the common target-independent calculation, which gives very high numbers. As a result, the scalar version is chosen in many cases. The situation on AVX-512 is even worse, since we have 3-src shuffles that significantly reduce the cost.
In this patch I calculate the cost on AVX-512. It will allow to compare interleave pattern with gather/scatter and choose a better solution (PR31426).
* Shiffle-broadcast cost will be changed in Simon's upcoming patch.
Differential Revision: https://reviews.llvm.org/D28118
llvm-svn: 290810
This reverts commit r290694. It broke sanitizer tests on Win64. I'll
probably bring this back, but the jump tables will just live in .text
like they do for MSVC.
llvm-svn: 290714
Among other stuff, this allows to use predefined .option.machine_version_major
/minor/stepping symbols in the directive.
Relevant test expanded at once (also file renamed for clarity).
Differential Revision: https://reviews.llvm.org/D28140
llvm-svn: 290710
Summary:
We were already using 32-bit jump table entries, but this was a
consequence of the default PIC model on Win64, and not an intentional
design decision. This patch ensures that we always use 32-bit label
difference jump table entries on Win64 regardless of the PIC model. This
is a good idea because it saves executable size and object file size.
Moving the jump tables to .rdata cleans up the disassembled object code
and reduces the available ROP targets, but it requires adding one more
RIP-relative lea to the code. COFF doesn't have relocations to express
the difference between two arbitrary symbols, so we can't use the jump
table label in the label difference like we do elsewhere.
Fixes PR31488
Reviewers: majnemer, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28141
llvm-svn: 290694
There are cases of AVX-512 instructions that have two possible encodings. This is the case with instructions that use vector registers with low indexes of 0 - 15 and do not use the zmm registers or the mask k registers.
The EVEX encoding prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, using the VEX encoding for these instructions results in a code size reduction of ~2 bytes even though it is compiled with the AVX-512 features enabled.
Reviewers: Craig Topper, Zvi Rackoover, Elena Demikhovsky
Differential Revision: https://reviews.llvm.org/D27901
llvm-svn: 290663
The feature allows for conditional assembly, filling the entries
of .amd_kernel_code_t etc.
Symbols are defined with value 0 at the beginning of each kernel scope.
After each register usage, the respective symbol is set to:
value = max( value, ( register index + 1 ) )
Thus, at the end of scope the value represents a count of used registers.
Kernel scopes begin at .amdgpu_hsa_kernel directive, end at the
next .amdgpu_hsa_kernel (or EOF, whichever comes first). There is also
dummy scope that lies from the beginning of source file til the
first .amdgpu_hsa_kernel.
Test added.
Differential Revision: https://reviews.llvm.org/D27859
llvm-svn: 290608
The 128 and 256 bit masked intrinsics are currently unused by clang. The sse and avx2 unmasked intrinsics are used instead. The new 512-bit intrinsic will be used to do the same. Then all masked versions will removed and autoupgraded.
llvm-svn: 290573
According to the Cortex-A57 doc, FDIV/FSQRT instructions should use F0 unit
(W-unit in AArch64SchedA57.td, the same as cryptography instructions),
not F1 unit (X-unit in td, like ASIMD absolute diff accum SABA/UABA).
This patch changes FDIV/FSQRT scheduling declarations to use A57UnitW
instead of A57UnitX. Also, latencies for those instructions are
corrected.
Patch by Andrew Zhogin.
llvm-svn: 290426
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: mkuper, MatzeB, aprantl
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290423
The InstructionSelect pass will not look at target specific instructions
since they are already selected. As a result, the operands of target
specific instructions must be properly constrained, because it is not
going to fix them.
This fixes invalid register classes on call instruction.
llvm-svn: 290377
Canonicalize a select with a constant to the false side. This
enables more instruction shrinking opportunities since an
inline immediate can be used for the false side of v_cndmask_b32_e32.
This seems to usually be better but causes some code size regressions
in some tests.
llvm-svn: 290372
This is for splitMergedValStore in DAG Combine to share the target query interface
with similar logic in CodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D24707
llvm-svn: 290363
Follow up to D27209 fix, this patch now properly handles single transient
instruction in basic block.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D27856
llvm-svn: 290361
Summary: This is needed for later SDWA support in CodeGen.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27412
llvm-svn: 290338
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
llvm-svn: 290336
Replacing the memory operand in the ymm version of VPMADDWD from i128mem to i256mem.
Differential Revision: https://reviews.llvm.org/D28024
llvm-svn: 290333
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
I added API for creation a target specific memory node in DAG. Today, all memory nodes are common for all targets and their constructors are located in SelectionDAG.cpp.
There are some cases in X86 where we need to create a special node - truncation-with-saturation store, float-to-half-store.
In the current patch I added truncation-with-saturation nodes and I'm using them for intrinsics. In the future I plan to implement DAG lowering for truncation-with-saturation pattern.
Differential Revision: https://reviews.llvm.org/D27899
llvm-svn: 290250
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
When the instruction is processed the first time, it may be
deleted resulting in crashes. While the new test adds the same
user to the worklist twice, this particular case doesn't crash
but I'm not sure why.
llvm-svn: 290191
I haven't managed to get this to fail yet but its technically possible for the AND -> shuffle decomposition to result in illegal types.
llvm-svn: 290183
Summary:
Without a MachineMemOperand, the scheduler was assuming MIMG instructions
were ordered memory references, so no loads or stores could be reordered
across them.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27536
llvm-svn: 290179
Include of llvm/IR/Verifier.h was removed from HexagonCommonGEP.cpp in r289604
as unused. In fact it is required when expensive checks are enabled, because
it declared function `verifyFunction`, which is called in conditionally compiled
part of the file.
llvm-svn: 290170
Summary:
The expression for computing the return value of getMemOpBaseRegImmOfs has only
one possible value. The other value would result in a return earlier in the
function. This patch replaces the expression with its only possible value.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27437
llvm-svn: 290133
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
llvm-svn: 290106
Teach the instruction selector and legalizer that it's ok to have adds with 8 or
16-bit integers.
This is the second part of https://reviews.llvm.org/D27704
llvm-svn: 290105
Teach the instruction selector that it's ok to copy small values from physical
registers.
First part of https://reviews.llvm.org/D27704
llvm-svn: 290104
PWR9 processor model for instruction scheduling. A subsequent patch will migrate
PWR9 to Post RA MIScheduler.
https://reviews.llvm.org/D24525
llvm-svn: 290102
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
llvm-svn: 290098
Summary:
Added pair of directives .hsa_code_object_metadata/.end_hsa_code_object_metadata.
Between them user can put YAML string that would be directly put to the generated note. E.g.:
'''
.hsa_code_object_metadata
{
amd.MDVersion: [ 2, 0 ]
}
.end_hsa_code_object_metadata
'''
Based on D25046
Reviewers: vpykhtin, nhaustov, yaxunl, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, mgorny, tony-tye
Differential Revision: https://reviews.llvm.org/D27619
llvm-svn: 290097
Add support for selecting simple G_LOAD and G_FRAME_INDEX instructions (32-bit
scalars only). This will be useful for functions that need to pass arguments on
the stack.
First part of https://reviews.llvm.org/D27195.
llvm-svn: 290096
Not sure whether it causes and ASAN false positive or whether it
actually leads to incorrect code or whether it even exposes bad code.
Hans, I'll get you instructions to reproduce this.
llvm-svn: 290066
Commit on behalf of Gadi Haber
Removed EVEX_V512 prefix from scalar EVEX instructions since HW ignores L'L bits anyway (LIG). 4 instructions are modified.
The changed encodings are validated with XED.
Rviewers: delena, igorb
Differential revision: https://reviews.llvm.org/D27802
llvm-svn: 290065
These nodes are only emitted for lowering FABS/FNEG/FNABS/FCOPYSIGN. Ideally we just wouldn't create these nodes if SSE2 or higher is available, but it was simple to just convert them in DAG combine.
For SSE2, AVX, and AVX512 with DQI this is no functional change as the execution domain fixing pass ensures the right domain is selected regardless of the ISD opcode.
For AVX-512 without DQI we end up using integer instructions since the floating point versions aren't available. But we were already doing that for any logical operations in code that didn't come from FABS/FNEG/FNABS/FCOPYSIGN so this seems no worse. And we get the benefit of being able to fold broadcasts now.
llvm-svn: 290060
Re-apply r288561: Liveness tracking should be correct now after r290014.
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 290026
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
atomic_load_add returns the value before addition, but sets EFLAGS based on the
result of the addition. That means it's setting the flags based on effectively
subtracting C from the value at x, which is also what the outer cmp does.
This targets a pattern that occurs frequently with reference counting pointers:
void decrement(long volatile *ptr) {
if (_InterlockedDecrement(ptr) == 0)
release();
}
Clang would previously compile it (for 32-bit at -Os) as:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: 31 c9 xor %ecx,%ecx
6: 49 dec %ecx
7: f0 0f c1 08 lock xadd %ecx,(%eax)
b: 83 f9 01 cmp $0x1,%ecx
e: 0f 84 00 00 00 00 je 14 <?decrement@@YAXPCJ@Z+0x14>
14: c3 ret
and with this patch it becomes:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: f0 ff 08 lock decl (%eax)
7: 0f 84 00 00 00 00 je d <?decrement@@YAXPCJ@Z+0xd>
d: c3 ret
(Equivalent variants with _InterlockedExchangeAdd, std::atomic<>'s fetch_add
or pre-decrement operator generate the same code.)
Differential Revision: https://reviews.llvm.org/D27781
llvm-svn: 289955
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
This patch appears to result in trampolines in vtables being miscompiled
when they in turn tail call a method.
I've posted some preliminary details about the failure on the thread for
this commit and talked to Hal. He was comfortable going ahead and
reverting until we sort out what is wrong.
llvm-svn: 289928
MachineLegalizer used to be the name of both the class and the member,
causing GCC errors. r276522 fixed that by renaming the member to just
'Legalizer'. The 'class' workaround isn't necessary anymore; drop it.
llvm-svn: 289848
This patch checks that the SlowMisaligned128Store subtarget feature is set
when penalizing such stores in getMemoryOpCost.
Differential Revision: https://reviews.llvm.org/D27677
llvm-svn: 289845
This is a tiny patch with a big pile of test changes.
This partially fixes PR27885:
https://llvm.org/bugs/show_bug.cgi?id=27885
My motivating case looks like this:
- vpshufd {{.*#+}} xmm1 = xmm1[0,1,0,2]
- vpshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
- vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5,6,7]
+ vshufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[0,2]
And this happens several times in the diffs. For chips with domain-crossing penalties,
the instruction count and size reduction should usually overcome any potential
domain-crossing penalty due to using an FP op in a sequence of int ops. For chips such
as recent Intel big cores and Atom, there is no domain-crossing penalty for shufps, so
using shufps is a pure win.
So the test case diffs all appear to be improvements except one test in
vector-shuffle-combining.ll where we miss an opportunity to use a shift to generate
zero elements and one test in combine-sra.ll where multiple uses prevent the expected
shuffle combining.
Differential Revision: https://reviews.llvm.org/D27692
llvm-svn: 289837
Move the check for the code model into isGlobalInSmallSectionImpl and return false (not in small section) for variables placed in sections prefixed with .ldata (workaround for a tool limitation).
llvm-svn: 289832
Add the missing domain equivalences for movss, movsd, movd and movq zero extending loading instructions.
Differential Revision: https://reviews.llvm.org/D27684
llvm-svn: 289825
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
In some situations, the BUILD_VECTOR node that builds a v18i8 vector by
a splat of an i8 constant will end up with signed 8-bit values and other
situations, it'll end up with unsigned ones. Handle both situations.
Fixes PR31340.
llvm-svn: 289804
This is essentially a recommit of r285893, but with a correctness fix. The
problem of the original commit was that this:
bic r5, r7, #31
cbz r5, .LBB2_10
got rewritten into:
lsrs r5, r7, #5
beq .LBB2_10
The result in destination register r5 is not the same and this is incorrect
when r5 is not dead. So this fix includes checking the uses of the AND
destination register. And also, compared to the original commit, some regression
tests didn't need changing anymore because of this extra check.
For completeness, this was the original commit message:
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more
efficient instruction selection if the bitmask is one consecutive sequence of
set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and
set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and
set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit
into the sign bit with one LSLS and change the condition query from NE/EQ to
MI/PL (we could also implement this by shifting into the carry bit and
branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower
zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two
16-bit instructions but can elide the CMP and doesn't require materializing a
complex immediate, so is also a win.
Differential Revision: https://reviews.llvm.org/D27761
llvm-svn: 289794
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Most of the PowerPC64 code generation for the ELF ABI is already PIC.
There are four main exceptions:
(1) Constant pointer arrays etc. should in writeable sections.
(2) The TOC restoration NOP after a call is needed for all global
symbols. While GNU ld has a workaround for questionable GCC self-calls,
we trigger the checks for calls from COMDAT sections as they cross input
sections and are therefore not considered self-calls. The current
decision is questionable and suboptimal, but outside the scope of the
change.
(3) TLS access can not use the initial-exec model.
(4) Jump tables should use relative addresses. Note that the current
encoding doesn't work for the large code model, but it is more compact
than the default for any non-trivial jump table. Improving this is again
beyond the scope of this change.
At least (1) and (3) are assumptions made in target-independent code and
introducing additional hooks is a bit messy. Testing with clang shows
that a -fPIC binary is 600KB smaller than the corresponding -fno-pic
build. Separate testing from improved jump table encodings would explain
only about 100KB or so. The rest is expected to be a result of more
aggressive immediate forming for -fno-pic, where the -fPIC binary just
uses TOC entries.
This change brings the LLVM output in line with the GCC output, other
PPC64 compilers like XLC on AIX are known to produce PIC by default
as well. The relocation model can still be provided explicitly, i.e.
when using MCJIT.
One test case for case (1) is included, other test cases with relocation
mode sensitive behavior are wired to static for now. They will be
reviewed and adjusted separately.
Differential Revision: https://reviews.llvm.org/D26566
llvm-svn: 289743
I've chosen to remove NVPTXInstrInfo::CanTailMerge but not
NVPTXInstrInfo::isLoadInstr and isStoreInstr (which are also dead)
because while the latter two are reasonably useful utilities, the former
cannot be used safely: It relies on successful address space inference
to identify writes to shared memory, but addrspace inference is a
best-effort thing.
llvm-svn: 289740
Summary:
Previously they were defined as a 2D char array in a header file. This
is kind of overkill -- we can let the linker lay out these strings
however it pleases. While we're at it, we might as well just inline
these constants where they're used, as each of them is used only once.
Also move NVPTXUtilities.{h,cpp} into namespace llvm.
Reviewers: tra
Subscribers: jholewinski, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27636
llvm-svn: 289728
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
llvm-svn: 289706
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
Since SGPRs should spill to VGPRs, they should be allocated first.
I don't think this is sufficient for SGPRs to always spill to
VGPRs though.
llvm-svn: 289671
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
adding new optimization opportunity by adding new X86ISelLowering pattern. The test case was shown in https://llvm.org/bugs/show_bug.cgi?id=30945.
Test explanation:
Select gets three arguments mask, op and op2. In this case, the Mask is a result of ICMP. The ICMP instruction compares (with equal operand) the zero initializer vector and the result of the first ICMP.
In general, The result of "cmp eq, op1, zero initializers" is "not(op1)" where op1 is a mask. By rearranging of the two arguments inside the Select instruction, we can get the same result. Without the necessary of the middle phase ("cmp eq, op1, zero initializers").
Missed optimization opportunity:
vpcmpled %zmm0, %zmm1, %k0
knotw %k0, %k1
can be combine to
vpcmpgtd %zmm0, %zmm2, %k1
Reviewers:
1. delena
2. igorb
Commited after check all
Differential Revision: https://reviews.llvm.org/D27160
llvm-svn: 289653
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. This will yield subtle bugs if
interposition is attempted. As a result, regardless of whether we're in PIC
mode, we don't assume that we need to add the nop to support the possibility of
ELF interposition. However, the necessary check is in place (i.e. calling
GV->isInterposable and TM.shouldAssumeDSOLocal) so when we have functions for
which interposition is allowed at the IR level, we'll add the nop as necessary.
In the mean time, we'll generate more tail calls and fewer nops when compiling
position-independent code.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 289638
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
This is not always behaving as expected as it turns out block live-in
lists are only correct most of the time. Still waiting for reviews on
https://reviews.llvm.org/D27559 to have them correct all of the time.
See also http://llvm.org/PR31361, rdar://25117107
This reverts commit r288567.
This reverts commit r288561.
llvm-svn: 289570
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
llvm-svn: 289566
In certain cases it is possible that transient instructions such as
%reg = IMPLICIT_DEF as a single instruction in a basic block to reach
the MipsHazardSchedule pass. This patch teaches MipsHazardSchedule to
properly look through such cases.
Reviewers: vkalintiris, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D27209
llvm-svn: 289529
Summary:
This pass will be used to relax instructions which use out of bounds
memory accesses to equivalent operations that can work with the
addresses.
The pass currently implements relaxation for the STDWPtrQRr instruction.
Without this pass, an assertion error would be hit in the pseudo expansion pass.
In the future, we will need to add more instructions to this pass. We can do
that on a case-by-case basic.
Reviewers: arsenm, kparzysz
Subscribers: wdng, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27650
llvm-svn: 289517
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
llvm-svn: 289510
Power8 has MTVSRWZ but no LXSIBZX/LXSIHZX, so move 1 or 2 bytes to VSR through MTVSRWZ is much faster than store the extended value into stack and load it with LXSIWZX.
This patch fixes pr31144.
Differential Revision: https://reviews.llvm.org/D27287
llvm-svn: 289473
Summary:
While the result is constant across a single primitive, each pixel
shader wave can have pixels from multiple primitives.
Reviewers: tstellarAMD, arsenm
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D27572
llvm-svn: 289447
PMULDQ returns the 64-bit result of the signed multiplication of the lower 32-bits of vXi64 vector inputs, we can lower with this if the sign bits stretch that far.
Differential Revision: https://reviews.llvm.org/D27657
llvm-svn: 289426
These intrinsics only load a single element. We should use sse_loadf32/f64 to give more options of what loads it can match.
Currently these instructions are often only getting their load folded thanks to the load folding in the peephole pass. I plan to add more types of loads to sse_load_f32/64 so we can match without the peephole.
llvm-svn: 289423
Summary:
These intrinsic instructions are all selected from intrinsics that have well defined behavior for where the upper bits come from. It's not the same place as the lower bits.
As you can see we were suppressing load folding for these instructions in some cases. In none of the cases was the separate load helping avoid a partial dependency on the destination register. So we should just go ahead and allow the load to be folded.
Only foldMemoryOperand was suppressing folding for these. They all have patterns for folding sse_load_f32/f64 that aren't gated with OptForSize, but sse_load_f32/f64 doesn't allow 128-bit vector loads. It only allows scalar_to_vector and vzmovl of scalar loads to match. There's no reason we can't allow a 128-bit vector load to be narrowed so I would like to fix sse_load_f32/f64 to allow that. And if I do that it changes some of these same test cases to fold the load too.
Reviewers: spatel, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27611
llvm-svn: 289419
When the load node which the broadcast instruction broadcasts has multiple uses, it cannot be folded.
A fallback pattern is added to catch these cases and provide another solution.
Differential Revision: https://reviews.llvm.org/D27661
llvm-svn: 289404
Regcall calling convention passes mask types arguments in x86 GPR registers.
The review includes the changes required in order to support v32i1, v16i1 and v8i1.
Differential Revision: https://reviews.llvm.org/D27148
llvm-svn: 289383
There was a bug where we would hit an assertion if 'Q' was used as a
constraint.
I also removed hardcoded register names to prefer regexes so the tests
don't break when the register allocator changes.
llvm-svn: 289325
Summary: This gets rid of the hardcoded 'r0' that was used previously.
Reviewers: asl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27567
llvm-svn: 289322
Ideally ISD::FP_TO_SINT and ISD::FP_TO_UINT would only be used for cases with the same number of input and output elements.
Similar things have already been done for other convert intrinsics.
llvm-svn: 289316
These should've been checking whether the immediate is a 6-bit unsigned
integer.
If the immediate was '63', this would cause an assertion error which
shouldn't have occurred.
llvm-svn: 289315
Since 32-bit instructions with 32-bit input immediate behavior
are used to materialize 16-bit constants in 32-bit registers
for 16-bit instructions, determining the legality based
on the size is incorrect. Change operands to have the size
specified in the type.
Also adds a workaround for a disassembler bug that
produces an immediate MCOperand for an operand that
is supposed to be OPERAND_REGISTER.
The assembler appears to accept out of bounds immediates and
truncates them, but this seems to be an issue for 32-bit
already.
llvm-svn: 289306
Summary:
There is no point in setting SGPRS=104, because VI allocates SGPRs
in multiples of 16, so 104 -> 112. That enables us to use all 102 SGPRs
for general purposes.
Reviewers: tstellarAMD
Subscribers: qcolombet, arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27149
llvm-svn: 289260
Reapplied with fix for PR31323 - X86 SSE2 vXi16 multiplies for illegal types were creating CONCAT_VECTORS nodes with vector inputs that might not total the number of elements in the result type.
llvm-svn: 289232
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
sse_load_f32/f64 can also match loads that are zero extended to vectors. We shouldn't match that because we wouldn't be able to get the instruction to zero the upper bits like the intrinsic semantics would require for such a case.
There is a test case that does depend on this behavior.
llvm-svn: 289193
We could previously select an integer which would hit an assertion error
in pseudo expansion.
The new type will also generate the appropriate fixups if needed, which
wasn't done beforehand.
llvm-svn: 289192
Summary:
Scalar intrinsics have specific semantics about the which input's upper bits are passed through to the output. The same input is also supposed to be the input we use for the lower element when the mask bit is 0 in a masked operation. We aren't currently keeping these semantics with instruction selection.
This patch corrects this by introducing new scalar FMA ISD nodes that indicate whether operand 1(one of the multiply inputs) or operand 3(the additon/subtraction input) should pass thru its upper bits.
We use this information to select 213/132 form for the operand 1 version and the 231 form for the operand 3 version.
We also use this information to suppress combining FNEG operations on the passthru input since semantically the passthru bits aren't negated. This is stronger than the earlier check added for a user being SELECTS so we can remove that.
This fixes PR30913.
Reviewers: delena, zvi, v_klochkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27144
llvm-svn: 289190
These were selecting directly to the VOP2 form instead
of VOP3 like the i32 instructions. Fixes regressions in
future commits where an immediate isn't folded because it was
initially used for the second operand.
Because uniform 16-bit operations are promoted to i32, it's
difficult to get a simple testcase where this matters. Fold
failures in SIFoldOperands here tend to be hidden by commute
and fold in SIShrinkInstructions.
llvm-svn: 289189
This was exposed by some code that used more than one level of sub-
registers. There is no testcase, because there is no such code in the
Hexagon backend.
llvm-svn: 289099
Not having this legal led to combine failures, resulting
in dumb things like bitcasts of constants not being folded
away.
The only reason I'm leaving the v_mov_b32 hack that f32
already uses is to avoid madak formation test regressions.
PeepholeOptimizer has an ordering issue where the immediate
fold attempt is into the sgpr->vgpr copy instead of the actual
use. Running it twice avoids that problem.
llvm-svn: 289096
The correct commutable opcode was set to itself, so this
was simply swapping the operands to commute instead of also
changing the opcode to v_subrev_u16.
llvm-svn: 289093
Multiple metadata values for records such as opencl.ocl.version, llvm.ident
and similar are created after linking several modules. For some of them, notably
opencl.ocl.version, this creates semantic problem because we cannot tell which
version of OpenCL the composite module conforms.
Moreover, such repetitions of identical values often create a huge list of
unneeded metadata, which grows bitcode size both in memory and stored on disk.
It can go up to several Mb when linked against our OpenCL library. Lastly, such
long lists obscure reading of dumped IR.
The pass unifies metadata after linking.
Differential Revision: https://reviews.llvm.org/D25381
llvm-svn: 289092
Summary:
Attaching !absolute_symbol to a global variable does two things:
1) Marks it as an absolute symbol reference.
2) Specifies the value range of that symbol's address.
Teach the X86 backend to allow absolute symbols to appear in place of
immediates by extending the relocImm and mov64imm32 matchers. Start using
relocImm in more places where it is legal.
As previously proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105800.html
Differential Revision: https://reviews.llvm.org/D25878
llvm-svn: 289087
Summary:
LC can currently select scalar load for uniform memory access
basing on readonly memory address space only. This restriction
originated from the fact that in HW prior to VI vector and scalar caches
are not coherent. With MemoryDependenceAnalysis we can check that the
memory location corresponding to the memory operand of the LOAD is not
clobbered along the all paths from the function entry.
Reviewers: rampitec, tstellarAMD, arsenm
Subscribers: wdng, arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D26917
llvm-svn: 289076
Summary:
Without the fix to isFrameOffsetLegal to consider the instruction's
immediate offset, the new test case hits the corresponding assertion in
resolveFrameIndex, because the LocalStackSlotAllocation pass re-uses a
different base register.
With only the fix to isFrameOffsetLegal, code quality reduces in a bunch of
places because frame base registers are added where they're not needed.
This is addressed by properly implementing needsFrameBaseReg, which also
helps to avoid unnecessary zero frame indices in a bunch of other places.
Fixes piglit glsl-1.50/execution/variable-indexing/gs-output-array-vec4-index-wr.shader_test
Reviewers: arsenm, tstellarAMD
Subscribers: qcolombet, kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D27344
llvm-svn: 289048
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
llvm-svn: 288980
If we don't skip over DEBUG_VALUEs, we get differences between -g and non-g
code.
This fixes PR31242.
Differential Revision: https://reviews.llvm.org/D27485
llvm-svn: 288965
The second operand of an "ri" instruction may be an immediate, but it may
also be a globalvariable, so we should make any assumptions.
This fixes PR31271.
Differential Revision: https://reviews.llvm.org/D27481
llvm-svn: 288964
This is now performed more generally by the target shuffle combine code.
Already covered by tests that were originally added in D7666/rL229480 to support combineVectorZext (or VectorZextCombine as it was known then....).
Differential Revision: https://reviews.llvm.org/D27510
llvm-svn: 288918
We are being inconsistent with these instructions (and all their variants.....) with a random mix of them using the default float domain.
Differential Revision: https://reviews.llvm.org/D27419
llvm-svn: 288902
The non-constant pool version of DecodeVPERMIL2PMask was not offsetting correctly for the second input. I've updated the code to match the implementation in the constant-pool version.
Annoyingly this bug was hidden for so long as it's tricky to combine to useful variable shuffle masks that don't become constant-pool entries.
llvm-svn: 288898
Summary:
If we write an immediate to a VGPR and then copy the VGPR to an
SGPR, we can replace the copy with a S_MOV_B32 sgpr, imm, rather than
moving the copy to the SALU.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D27272
llvm-svn: 288849
Summary:
Prefer expansions such as: pmullw,pmulhw,unpacklwd,unpackhwd over pmulld.
On Silvermont [source: Optimization Reference Manual]:
PMULLD has a throughput of 1/11 [instruction/cycles].
PMULHUW/PMULHW/PMULLW have a throughput of 1/2 [instruction/cycles].
Fixes pr31202.
Analysis of this issue was done by Fahana Aleen.
Reviewers: wmi, delena, mkuper
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D27203
llvm-svn: 288844
There were two problems:
+ AArch64 was reusing random data from its binary op tables, which is
complete nonsense for G_SEQUENCE.
+ Even when AArch64 gave up and said it couldn't handle G_SEQUENCE,
the generic code asserted.
llvm-svn: 288836
Summary:
This is NFC but prevents assertions when PartialMappingIdx is tablegen-erated.
The assumptions were:
1) FirstGPR is 0
2) FirstGPR is the first of the First* enumerators.
GPR32 is changed to 1 to demonstrate that assumption #1 is fixed. #2 will
be covered by a subsequent patch that tablegen-erates information and swaps
the order of GPR and FPR as a side effect.
Depends on D27336
Reviewers: ab, t.p.northover, qcolombet
Subscribers: aemerson, rengolin, vkalintiris, dberris, rovka, llvm-commits
Differential Revision: https://reviews.llvm.org/D27337
llvm-svn: 288812
When we see a non flag-setting instruction for which only the flag-setting
version is available in Thumb1, we should give a better error message than
"invalid instruction".
Differential Revision: https://reviews.llvm.org/D27414
llvm-svn: 288805
Check if a build_vector node includes a repeated constant pattern and replace it with a broadcast of that pattern.
For example:
"build_vector <0, 1, 2, 3, 0, 1, 2, 3>" would be replaced by "broadcast <0, 1, 2, 3>"
Differential Revision: https://reviews.llvm.org/D26802
llvm-svn: 288804
This is the final patch in the series of patches that improves
BUILD_VECTOR handling on PowerPC. This adds a few peephole optimizations
to remove redundant instructions. It also adds a large test case which
encompasses a large set of code patterns that build vectors - this test
case was the motivator for this series of patches.
Differential Revision: https://reviews.llvm.org/D26066
llvm-svn: 288800
Summary: This patch makes sure FirstCSPop and MBBI never point to DBG_VALUE instructions, which affected the code generated.
Reviewers: mkuper, aprantl, MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27343
llvm-svn: 288794
This pattern turned a vector sqrt/rcp/rsqrt operation of sse_load_f32/f64 into the the scalar instruction for the operation and put undef into the upper bits. For correctness, the resulting code should still perform the sqrt/rcp/rsqrt on the upper bits after the load is extended since that's what the operation asked for. Particularly in the case where the upper bits are 0, in that case we need calculate the sqrt/rcp/rsqrt of the zeroes and keep the result in the upper-bits. This implies we should be using the packed instruction still.
The only test case for this pattern is one I just added so there was no coverage of this.
llvm-svn: 288784
The intrinsics are supposed to pass the upper bits straight through to their output register. This means we need to make sure we still perform the 128-bit load to get those upper bits to pass to give to the instruction since the memory form of the instruction only reads 32 or 64 bits.
llvm-svn: 288781
The intrinsic takes one argument, the lower bits are affected by the operation and the upper bits should be passed through. The instruction itself takes two operands, the high bits of the first operand are passed through and the low bits of the second operand are modified by the operation. To match this to the intrinsic we should pass the single intrinsic input to both operands.
I had to remove the stack folding test for these instructions since they depended on the incorrect behavior. The same register is now used for both inputs so the load can't be folded.
llvm-svn: 288779
Summary:
This patch removes the scalar logical operation alias instructions. We can just use reg class copies and use the normal packed instructions instead. This removes the need for putting these instructions in the execution domain fixing tables as was done recently.
I removed the loadf64_128 and loadf32_128 patterns as DAG combine creates a narrower load for (extractelt (loadv4f32)) before we ever get to isel.
I plan to add similar patterns for AVX512DQ in a future commit to allow use of the larger register class when available.
Reviewers: spatel, delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27401
llvm-svn: 288771
It is kinda crazy to have llvm/include and llvm/lib/Target in the include path for every tablegen invocation for every tablegen-like tool.
This patch removes those flags from the tablgen function that is called everywhere by instead creating a variable LLVM_TABLEGEN_FLAGS which is setup in the LLVM source directories.
This removes TableGen.cmake's dependency on LLVM_MAIN_SRC_DIR, and LLVM_MAIN_INCLUDE_DIR.
llvm-svn: 288770
The structured CFG is just an aid to inserting exec
mask modification instructions, once that is done
we don't really need it anymore. We also
do not analyze blocks with terminators that
modify exec, so this should only be impacting
true branches.
llvm-svn: 288744
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
This changes the scalar non-intrinsic non-avx roundss/sd instruction
definitions not to read their destination register - allowing partial dependency
breaking.
This fixes PR31143.
Differential Revision: https://reviews.llvm.org/D27323
llvm-svn: 288703
Structure the definitions a bit more like the other classes.
The main change here is to split EXP with the done bit set
to a separate opcode, so we can set mayLoad = 1 so that it won't
be reordered before the other exp stores, since this has the special
constraint that if the done bit is set then this should be the last
exp in she shader.
Previously all exp instructions were inferred to have unmodeled
side effects.
llvm-svn: 288695
Doing so changes the evaluation order for relocation composition.
Patch By: Daniel Sanders
Reviewers: vkalintiris, atanasyan
Differential Revision: https://reviews.llvm.org/D26401
llvm-svn: 288666
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
llvm-svn: 288658
lib/Target/AMDGPU/SIRegisterInfo.cpp: In member function 'void llvm::SIRegisterInfo::spillSGPR(llvm::MachineBasicBlock::iterator, int, llvm::RegScavenger*) const':
lib/Target/AMDGPU/SIRegisterInfo.cpp:572:30: warning: variable 'SubRC' set but not used [-Wunused-but-set-variable]
const TargetRegisterClass *SubRC = nullptr;
^
lib/Target/AMDGPU/SIRegisterInfo.cpp: In member function 'void llvm::SIRegisterInfo::restoreSGPR(llvm::MachineBasicBlock::iterator, int, llvm::RegScavenger*) const':
lib/Target/AMDGPU/SIRegisterInfo.cpp:723:30: warning: variable 'SubRC' set but not used [-Wunused-but-set-variable]
const TargetRegisterClass *SubRC = nullptr;
^
The variable was assigned to, but never used. The functions called did not
mutate state. Simplify the logic and remove the variable. Identified by gcc
5.4.0.
llvm-svn: 288601
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 288561
VSX has instructions lxsiwax/lxsdx that can load 32/64 bit value into VSX register cheaply. That patch makes it known to memory cost model, so the vectorization of the test case in pr30990 is beneficial.
Differential Revision: https://reviews.llvm.org/D26713
llvm-svn: 288560
Summary: Implement custom lowering of SHL_PARTS to enable lowering of left shift with larger than 32-bit shifts.
Reviewers: eliben, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27232
llvm-svn: 288541
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
Move setting of hasSideEffects out of SystemZInstrFormats.td,
to allow use of the format classes for instructions where this
flag shouldn't be set. NFC.
llvm-svn: 288524
Summary: They are currently being parsed as %f14, %f16, and %f18.
Reviewers: venkatra, jyknight
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27342
llvm-svn: 288503
getTargetConstantBitsFromNode currently only extracts constant pool vector data, but it will need to be generalized to support broadcast and scalar constant pool data as well.
Converted Constant bit extraction and Bitset splitting to helper lambda functions.
llvm-svn: 288496
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106640.html
This is for a couple of reasons:
- Values of type PointerType are unlike the other SequentialTypes (arrays
and vectors) in that they do not hold values of the element type. By moving
PointerType we can unify certain aspects of how the other SequentialTypes
are handled.
- PointerType will have no place in the SequentialType hierarchy once
pointee types are removed, so this is a necessary step towards removing
pointee types.
Differential Revision: https://reviews.llvm.org/D26595
llvm-svn: 288462
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Since the spill is for the whole wave, these
don't have the swizzling problems that vector stores do
and a single 4-byte allocation is enough to spill a 64 element
register. This should reduce the number of spill instructions and
put all the spills for a register in the same cacheline.
This should save allocated private size, but for now it doesn't.
The extra slots are allocated for each component, but never used
because the frame layout is essentially finalized before frame
indices are replaced. For always using the scalar store path,
this should probably be moved into processFunctionBeforeFrameFinalized.
llvm-svn: 288445
Summary:
Make AArch64InstrInfo::foldMemoryOperandImpl more general by folding all
full COPYs between register classes of the same size that are either
spilled or refilled.
Reviewers: MatzeB, qcolombet
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27271
llvm-svn: 288439
Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
llvm-svn: 288437
Summary:
This patch fixes comparison of 64-bit atomic with its expected value in CMP_SWAP_64 expansion.
Currently, the low words are compared with CMP, while the high words are compared with SBC. SBC expects the carry flag to be set if CMP detects a difference. CMP might leave the carry unset for unequal arguments though if the first one is >= than the second. This might cause the comparison logic to detect false equality.
Example of the broken C++ code:
```
std::atomic<long long> at(2);
long long ll = 1;
std::atomic_compare_exchange_strong(&at, &ll, 3);
```
Even though the atomic `at` and the expected value `ll` are not equal and `atomic_compare_exchange_strong` returns `false`, `at` is changed to 3.
The patch replaces SBC with CMPEQ.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D27315
llvm-svn: 288433
This time the issue is fortunately just a simple mistake rather than a horrible
design spectre. I thought SUBS/SBCS provided sufficient NZCV flags for
comparing two 64-bit values, but they don't.
The fix is slightly clunkier in AArch64 because we can't use conditional
execution to emit a pair of CMPs. Traditionally an "icmp ne i128" would map to
an EOR/EOR/ORR/CBNZ, but that uses more registers so it's easier to go with a
CSET/CINC/CBNZ combination. Slightly less efficient, but this is -O0 anyway.
Thanks to Anton Korobeynikov for pointing out the issue.
llvm-svn: 288418
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Now that we have fixups that only fill parts of a byte, it turns
out we have to mask off the bits outside the fixup area when
applying them. Failing to do so caused invalid object code to
be emitted for bprp with a negative 12-bit displacement.
llvm-svn: 288374
not all lakemont MCU support long nop.
we can't assume we can generate long nop by default for MCU.
Differential Revision: https://reviews.llvm.org/D26895
llvm-svn: 288363
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
llvm-svn: 288296
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
Summary:
When computing useful bits for a BFM instruction, we need
to take into consideration the case where both operands
of the BFM are equal and provide data that we need to track.
Not doing this can cause us to miss useful bits.
Fixes PR31138 (https://llvm.org/bugs/show_bug.cgi?id=31138)
Reviewers: t.p.northover, jmolloy
Subscribers: evandro, gberry, srhines, pirama, mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D27130
llvm-svn: 288253
Initial support for target shuffle constant folding in cases where all shuffle inputs are constant. We may be able to relax this and merge shuffles with only some constant inputs in the future.
I've added the helper function getTargetConstantBitsFromNode (based off a similar function in X86ShuffleDecodeConstantPool.cpp) that could be reused for other cases requiring constant vector extraction.
Differential Revision: https://reviews.llvm.org/D27220
llvm-svn: 288250
This patch corresponds to review:
https://reviews.llvm.org/D26023
This patch adds support for converting a vector of loads into a single load if
the loads are consecutive (in either direction).
llvm-svn: 288219
This patch corresponds to review:
https://reviews.llvm.org/D25980
This is the 2nd patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC. This particular patch combines a build vector
of fp-to-int conversions into an fp-to-int conversion of a build vector of fp
values. For example:
Converts (build_vector (fp_to_[su]i $A), (fp_to_[su]i $B), ...)
Into (fp_to_[su]i (build_vector $A, $B, ...))).
Which is a natural match for much cleaner code.
llvm-svn: 288218
Summary: Previously 0 and -1 was matched via tablegen rules. But this could cause problems where a physical register was being used where a virtual register was expected (seen in optimizeSelect and TwoAddressInstructionPass). Instead follow AArch64 and match in DAGToDAGISel.
Reviewers: eliben, majnemer
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27171
llvm-svn: 288215
This commit caused some miscompiles that did not show up on any of the bots.
Reverting until we can investigate the cause of those failures.
llvm-svn: 288214
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
Use vaddr/vdst for the same purposes.
This also fixes a beg in SIInsertWaits for the
operand check. The stored value operand is currently called
data0 in the single offset case, not data.
llvm-svn: 288188
It isn't generally safe to fold the frame index
directly into the operand since it will possibly
not be an inline immediate after it is expanded.
This surprisingly seems to produce better code, since
the FI doesn't prevent folding other immediate operands.
llvm-svn: 288185
Change the logic for when to fold immediates to
consider the destination operand rather than the
source of the materializing mov instruction.
No change yet, but this will allow for correctly handling
i16/f16 operands. Since 32-bit moves are used to materialize
constants for these, the same bitvalue will not be in the
register.
llvm-svn: 288184
Summary:
In AArch64InstrInfo::foldMemoryOperandImpl, catch more cases where the
COPY being spilled is copying from WZR/XZR, but the source register is
not in the COPY destination register's regclass.
For example, when spilling:
%vreg0 = COPY %XZR ; %vreg0:GPR64common
without this change, the code in TargetInstrInfo::foldMemoryOperand()
and canFoldCopy() that normally handles cases like this would fail to
optimize since %XZR is not in GPR64common. So the spill code generated
would be:
%vreg0 = COPY %XZR
STR %vreg
instead of the new code generated:
STR %XZR
Reviewers: qcolombet, MatzeB
Subscribers: mcrosier, aemerson, t.p.northover, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26976
llvm-svn: 288176
This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask_b32
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a propagation of source SGPR pair in place of v_cmp
is implemented. Additional side effect of this is that we may consume less VGPRs
at a cost of more SGPRs in case if holding of multiple conditions is needed, and
that is a clear win in most cases.
Differential Revision: https://reviews.llvm.org/D26114
llvm-svn: 288053
Bit-shifts by a whole number of bytes can be represented as a shuffle mask suitable for combining.
Added a 'getFauxShuffleMask' function to allow us to create shuffle masks from other suitable operations.
llvm-svn: 288040
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
I don't think isel selects these today, favoring adding the register to itself instead. But the load folding tables shouldn't be so concerned with what isel will use and just represent the relationships.
llvm-svn: 288007
If we were to unfold these, the load size would be increased to the register size. This is not safe to do since the enlarged load can do things like cross a page boundary into a page that doesn't exist.
I probably missed some instructions, but this should be a large portion of them.
llvm-svn: 288001
Most of these are the SSE4.1 PMOVZX/PMOVSX instructions which all read less than 128-bits. The only other was PMOVUPD which by definition is an unaligned load.
llvm-svn: 287991
Summary: When selectScalarSSELoad is looking for a scalar_to_vector of a scalar load, it makes sure the load is only used by the scalar_to_vector. But it doesn't make sure the scalar_to_vector is only used once. This can cause the same load to be folded multiple times. This can be bad for performance. This also causes the chain output to be duplicated, but not connected to anything so chain dependencies will not be satisfied.
Reviewers: RKSimon, zvi, delena, spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D26790
llvm-svn: 287983
The W bit distinquishes which operand is the memory operand. But if the mod bits are 3 then the memory operand is a register and there are two possible encodings. We already did this correctly for several other XOP instructions.
llvm-svn: 287961
Not sure this is truly needed but we had the floating point equivalents, the aligned equivalents, and the EVEX equivalents. So this just makes it complete.
llvm-svn: 287960
Summary:
Shuffle lowering may have widened the element size of a i32 shuffle to i64 before selecting X86ISD::SHUF128. If this shuffle was used by a vselect this can prevent us from selecting masked operations.
This patch detects this and changes the element size to match the vselect.
I don't handle changing integer to floating point or vice versa as its not clear if its better to push such a bitcast to the inputs of the shuffle or to the user of the vselect. So I'm ignoring that case for now.
Reviewers: delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27087
llvm-svn: 287939
This patch corrects the behaviour of code such as:
.local foo
jal foo
foo:
to use the correct jal expansion when writing ELF files.
Patch by: Daniel Sanders
Reviewers: zoran.jovanovic, seanbruno, vkalintiris
Differential Revision: https://reviews.llvm.org/D24722
llvm-svn: 287918
Vectorize UINT_TO_FP v2i32 -> v2f64 instead of scalarization (albeit still on the SIMD unit).
The codegen matches that generated by legalization (and is in fact used by AVX for UINT_TO_FP v4i32 -> v4f64), but has to be done in the x86 backend to account for legalization via 4i32.
Differential Revision: https://reviews.llvm.org/D26938
llvm-svn: 287886
The bug arises during register allocation on i686 for
CMPXCHG8B instruction when base pointer is needed. CMPXCHG8B
needs 4 implicit registers (EAX, EBX, ECX, EDX) and a memory address,
plus ESI is reserved as the base pointer. With such constraints the only
way register allocator would do its job successfully is when the addressing
mode of the instruction requires only one register. If that is not the case
- we are emitting additional LEA instruction to compute the address.
It fixes PR28755.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25088
llvm-svn: 287875
Move the definitions of three variables out of the switch.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25192
llvm-svn: 287874
- It does not modify the input instruction
- Second operand of any address is always an Index Register,
make sure we actually check for that, instead of a check for
an immediate value
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D24938
llvm-svn: 287873
Replace the CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes with general versions.
This is an initial step towards similar FP_TO_SINT/FP_TO_UINT and SINT_TO_FP/UINT_TO_FP lowering to AVX512 CVTTPS2QQ/CVTTPS2UQQ and CVTQQ2PS/CVTUQQ2PS with illegal types.
Differential Revision: https://reviews.llvm.org/D27072
llvm-svn: 287870
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
llvm-svn: 287843
m0 may need to be written for spill code, so
we don't want general code uses relying on the
value stored in it.
This introduces a few code quality regressions where copies
from m0 are not coalesced into copies of a copy of m0.
llvm-svn: 287841
The size and offset were wrong. The size of the object was
being used for the size of the access, when here it is really
being split into 4-byte accesses. The underlying object size
is set in the MachinePointerInfo, which also didn't have the
offset set.
llvm-svn: 287806
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
In rL283190, I added some InstAlias definitions to generate extended mnemonics
for some uses of the XXPERMDI instruction. However, when the assembler matches
these extended mnemonics, it matches the new instruction in situations where it
should match the old one.
This patch removes these definitions and accomplishes that by defining these
mnemonics with additional instructions that are isCodeGenOnly.
Fixes PR31127.
llvm-svn: 287765
Summary: This function is only called with integer VT arguments, so remove code that handles FP vectors.
Reviewers: RKSimon, craig.topper, delena, andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26985
llvm-svn: 287743
TargetSubtargetInfo is filled with CodeGen specific interfaces nowadays
(getInstrInfo(), getFrameLowering(), getSelectionDAGInfo()) most of the
tuning flags like enablePostRAScheduler(), getAntiDepBreakMode(),
enableRALocalReassignment(), ... also do not seem to be universal enough
to make sense outside of CodeGen.
Differential Revision: https://reviews.llvm.org/D26948
llvm-svn: 287708
This occurs during UINT_TO_FP v2f64 lowering.
We can easily generalize this to other horizontal ops (FHSUB, PACKSS, PACKUS) as required - we are doing something similar with PACKUS in lowerV2I64VectorShuffle
llvm-svn: 287676
Add missing unaligned store macros (ush/usw) and fix the exisiting
implementation of the unaligned load macros in order to generate
identical expansions with the GNU assembler.
llvm-svn: 287646
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Summary: Splat vectors are canonicalized to BUILD_VECTOR's so the code can be simplified. NFC-ish.
Reviewers: craig.topper, delena, RKSimon, andreadb
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D26678
llvm-svn: 287643
This commit handles cases where the size qualifier of an indirect memory reference operand in Intel syntax is missing (e.g. "vaddps xmm1, xmm2, [a]").
GCC will deduce the size qualifier for AVX512 vector and broadcast memory operands based on the possible matches:
"vaddps xmm1, xmm2, [a]" matches only “XMMWORD PTR” qualifier.
"vaddps xmm1, xmm2, [a]{1to4}" matches only “DWORD PTR” qualifier.
This is different from the current behavior of LLVM, which deduces the size qualifier based on the size of the memory operand.
For "vaddps xmm1, xmm2, [a]"
"char a;" will imply "BYTE PTR" qualifier
"short a;" will imply "WORD PTR" qualifier.
This commit aligns LLVM to GCC’s behavior.
This is the LLVM part of the review.
The Clang part of the review: https://reviews.llvm.org/D26587
Differential Revision: https://reviews.llvm.org/D26586
llvm-svn: 287630
I'm sure this caused the load size to misprint in Intel syntax output. We were also inconsistent about which patterns used which instruction between VEX and EVEX.
There are two different reg/reg versions of movq, one from a GPR and one from the lower 64-bits of an XMM register. This changes the loading folding table to use the single i64mem memory form for folding both cases. But we need to use TB_NO_REVERSE to prevent a duplicate entry in the unfolding table.
llvm-svn: 287622
Summary:
The index and one of the table operands can be swapped by changing the opcode to the other version. Neither of these operands are the one that can load from memory so this can't be used to increase memory folding opportunities.
We need to handle the unmasked forms and the kz forms. Since the load operand isn't being commuted we can commute the load and broadcast instructions too.
Reviewers: igorb, delena, Ayal, Farhana, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25652
llvm-svn: 287621
Summary:
Shuffle lowering widens the element size of a shuffle if elements are contiguous. This is sometimes help because wider element types have more shuffle options. If the shuffle is one of the arguments to a vselect this shuffle widening can introduce a bitcast between the vselect and the shuffle. This will prevent isel from selecting a masked operation. If the shuffle can be written equally efficiently with a different element size to match the vselect type we should change the shuffle type to allow masking.
This patch does this conversion for all VALIGND/VALIGNQ sizes. It also supports turning 128-bit PALIGNR into VALIGND/VALIGNQ. This fixes the case shown in PR31018.
I plan to add support for more operations in future patches.
Reviewers: RKSimon, zvi, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26902
llvm-svn: 287612
Summary:
When searching for load/store instructions to pair/merge don't treat
writes to WZR/XZR as clobbers since they don't change the value read
from WZR/XZR (which is always 0).
Reviewers: mcrosier, junbuml, jmolloy, t.p.northover
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26921
llvm-svn: 287592
This patch adds the seq macro.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris, seanbruno
Differential Revision: https://reviews.llvm.org/D24607
llvm-svn: 287573
At the moment we only use truncateVectorCompareWithPACKSS with direct vector comparison results (just one example of a known all/none signbits input).
This change relaxes the direct matching of a SETCC opcode by moving the logic up into SelectionDAG::ComputeNumSignBits and accepting any input with a known splatted signbit.
llvm-svn: 287535
- teach RelocVisitor to recognize bpf relocations
- fix AsmInfo->PointerSize to make sure dwarf is emitted correctly
- add a test for the above
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287521
This patch adds a test for the assembly code emitted with XRay
instrumentation. It also fixes a bug where the operand of a jump
instruction must be not the number of bytes to jump over, but rather the
number of 4-byte instructions.
Author: rSerge
Reviewers: dberris, rengolin
Differential Revision: https://reviews.llvm.org/D26805
llvm-svn: 287516
The tail call optimization was being used without proper consideration of
ABI requirements for saving and restoring the GP. This patch restricts tail
call optimization to functions within the same translation unit.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D24763
llvm-svn: 287505
The change is part of RegCall calling convention support for LLVM.
Long double (f80) requires special treatment as the first f80 parameter is saved in FP0 (floating point stack).
This review present the change and the corresponding tests.
Differential Revision: https://reviews.llvm.org/D26151
llvm-svn: 287485
add BPF disassembler, so tools like llvm-objdump can be used:
$ llvm-objdump -d -no-show-raw-insn ./sockex1_kern.o
./sockex1_kern.o: file format ELF64-BPF
Disassembly of section socket1:
bpf_prog1:
0: r6 = r1
8: r0 = *(u8 *)skb[23]
10: *(u32 *)(r10 - 4) = r0
18: r1 = *(u32 *)(r6 + 4)
20: if r1 != 4 goto 8
28: r2 = r10
30: r2 += -4
ld_imm64 (the only 16-byte insn) and special ld_abs/ld_ind instructions
had to be treated in a special way. The decoders for the rest of the insns
are automatically generated.
Add tests to cover new functionality.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287477
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
The MIPS MSA ASE provides instructions to convert to and from half precision
floating point. This patch teaches the MIPS backend to treat f16 as a legal
type and how to promote such values to f32 for the usual set of operations.
As a result of this, the fexup[lr].w intrinsics no longer crash LLVM during
type legalization.
Reviewers: zoran.jovanvoic, vkalintiris
Differential Revision: https://reviews.llvm.org/D26398
llvm-svn: 287349
Summary:
The 32-bit instructions don't zero the high 16-bits like the 16-bit
instructions do.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D26828
llvm-svn: 287342
Summary:
The addr64-based legalization is incorrect for MUBUF instructions with idxen
set as well as for BUFFER_LOAD/STORE_FORMAT_* instructions. This affects
e.g. shaders that access buffer textures.
Since we never actually need the addr64-legalization in shaders, this patch
takes the easy route and keys off the calling convention. If this ever
affects (non-OpenGL) compute, the type of legalization needs to be chosen
based on some TSFlag.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98664
Reviewers: arsenm, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D26747
llvm-svn: 287339
When we see a SETCC whose only users are zero extend operations, we can replace
it with a subtraction. This results in doing all calculations in GPRs and
avoids CR use.
Currently we do this only for ULT, ULE, UGT and UGE condition codes. There are
ways that this can be extended. For example for signed condition codes. In that
case we will be introducing additional sign extend instructions, so more careful
profitability analysis may be required.
Another direction to extend this is for equal, not equal conditions. Also when
users of SETCC are any_ext or sign_ext, we might be able to do something
similar.
llvm-svn: 287329
The same thing was done to 32-bit and 64-bit element sizes previously.
This will allow us to support these shuffls in InstCombineCalls along with the other variable shift intrinsics.
llvm-svn: 287312
since bpf instruction set was introduced people learned to
read and understand kernel verifier output whereas llvm asm
output stayed obscure and unknown. Convert llvm to emit
assembler text similar to kernel to avoid this discrepancy
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287300
Summary:
This extends FCOPYSIGN support to 512-bit vectors.
I've also added tests to show what the 128-bit and 256-bit cases look like with broadcast loads.
Reviewers: delena, zvi, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26791
llvm-svn: 287298
vXi64 multiplication is lowered into 3 calls of vpmuludq with the upper/lower 32-bit halves.
If any of these halves are zero then we can remove individual calls. Although there was isBuildVectorAllZeros code to do this I don't think it ever worked (maybe just for constant folded cases that don't seem to be tested for any longer).
This requires additional X86ISD support for computeKnownBitsForTargetNode, so far I've just added support for X86ISD::VZEXT (VPMOVZX* - helping the AVX2+ cases).
Partial fix for PR30845
Differential Revision: https://reviews.llvm.org/D26590
llvm-svn: 287223
Summary:
Variadic functions can be treated in the same way as normal functions
with respect to the number and types of parameters.
Reviewers: grosbach, olista01, t.p.northover, rengolin
Subscribers: javed.absar, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26748
llvm-svn: 287219
Register Calling Convention defines a new behavior for v64i1 types.
This type should be saved in GPR.
However for 32 bit machine we need to split the value into 2 GPRs (because each is 32 bit).
Differential Revision: https://reviews.llvm.org/D26181
llvm-svn: 287217
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
We save an inter-register file move this way. If there's any CPU where
the FP logic is slower, we could transform this back to int-logic in
MachineCombiner.
This helps, but doesn't solve, PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
The 'andn' test shows that we're missing a pattern match to
recognize the xor with -1 constant as a 'not' op.
llvm-svn: 287171
Summary:
A lot of the pseudo instructions are required because LLVM assumes that
all integers of the same size as the pointer size are legal. This means
that it will not currently expand 16-bit instructions to their 8-bit
variants because it thinks 16-bit types are legal for the operations.
This also adds all of the CodeGen tests that required the pass to run.
Reviewers: arsenm, kparzysz
Subscribers: wdng, mgorny, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26577
llvm-svn: 287162
We only ever create TargetConstantPool, TargetJumpTable, TargetExternalSymbol,
TargetGlobalAddress, TargetGlobalTLSAddress, MCSymbol and TargetBlockAddress
nodes as operands of X86ISD::Wrapper nodes, so we can remove one check and
invert the other.
Also update the documentation comment for X86ISD::Wrapper.
Differential Revision: https://reviews.llvm.org/D26731
llvm-svn: 287160
One half of the shifts obviously needed conditional selection based on whether
the shift amount is more than 32-bits, but leaving the other half as the
natural shift isn't acceptable either: it's undefined behaviour to shift a
32-bit value by more than 31.
llvm-svn: 287149
Summary:
Extend replaceZeroVectorStore to handle more vector type stores,
floating point zero vectors and set alignment more accurately on split
stores.
This is a follow-up change to r286875.
This change fixes PR31038.
Reviewers: MatzeB
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26682
llvm-svn: 287142
Summary:
1. Don't try to copy values to and from the same register class.
2. Replace copies with of registers with immediate values with v_mov/s_mov
instructions.
The main purpose of this change is to make MachineSink do a better job of
determining when it is beneficial to split a critical edge, since the pass
assumes that copies will become move instructions.
This prevents a regression in uniform-cfg.ll if we enable critical edge
splitting for AMDGPU.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D23408
llvm-svn: 287131
We can replace "scalar" FP-bitwise-logic with other forms of bitwise-logic instructions.
Scalar SSE/AVX FP-logic instructions only exist in your imagination and/or the bowels of
compilers, but logically equivalent int, float, and double variants of bitwise-logic
instructions are reality in x86, and the float variant may be a shorter instruction
depending on which flavor (SSE or AVX) of vector ISA you have...so just prefer float all
the time.
This is a preliminary step towards solving PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
Differential Revision:
https://reviews.llvm.org/D26712
llvm-svn: 287122
Both the (V)CVTDQ2PD (i32 to f64) and (V)CVTUDQ2PD (u32 to f64) conversion instructions are lossless and can be safely represented as generic SINT_TO_FP/UINT_TO_FP calls instead of x86 intrinsics without affecting final codegen.
LLVM counterpart to D26686
Differential Revision: https://reviews.llvm.org/D26736
llvm-svn: 287108
MipsFastISel uses a a class to represent addresses with a signed member
to represent the offset. MipsFastISel::emitStore, emitLoad and computeAddress
all treated the offset as being positive. In cases where the offset was
actually negative and a frame pointer was used, this would cause the constant
synthesis routine to crash as it would generate an unexpected instruction
sequence when frame indexes are replaced.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D26192
llvm-svn: 287099
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
Summary: These intrinsics have been unused for clang for a while. This patch removes them. We auto upgrade them to extractelements, a scalar operation and then an insertelement. This matches the sequence used by clangs intrinsic file.
Reviewers: zvi, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26660
llvm-svn: 287083
Doing this before register allocation reduces register pressure as we do
not even have to allocate a register for those dead definitions.
Differential Revision: https://reviews.llvm.org/D26111
llvm-svn: 287076
For the default, small and medium code model, use the existing
difference from the jump table towards the label. For all other code
models, setup the picbase and use the difference between the picbase and
the block address.
Overall, this results in smaller data tables at the expensive of one or
two more arithmetic operation at the jump site. Given that we only create
jump tables with a lot more than two entries, it is a net win in size.
For larger code models the assumption remains that individual functions
are no larger than 2GB.
Differential Revision: https://reviews.llvm.org/D26336
llvm-svn: 287059
wbinvl.* are vector instruction that do not sue vector registers.
v2: check only M?BUF instructions
Differential Revision: https://reviews.llvm.org/D26633
llvm-svn: 287056
Lower a = b * C where C = (2^n + 1) * 2^m to
add w0, w0, w0, lsl n
lsl w0, w0, m
Differential Revision: https://reviews.llvm.org/D229245
llvm-svn: 287019
The wave barrier represents the discardable barrier. Its main purpose is to
carry convergent attribute, thus preventing illegal CFG optimizations. All lanes
in a wave come to convergence point simultaneously with SIMT, thus no special
instruction is needed in the ISA. The barrier is discarded during code generation.
Differential Revision: https://reviews.llvm.org/D26585
llvm-svn: 287007
Artem Belevich