Use llvm::make_unique to avoid ambiguity with MSVC.
This patch adds a generic MacroFusion pass, that is used on X86 and
AArch64, which both define target-specific shouldScheduleAdjacent
functions. This generic pass should make it easier for other targets to
implement macro fusion and I intend to add macro fusion for ARM shortly.
Differential Revision: https://reviews.llvm.org/D34144
llvm-svn: 305690
Summary:
This patch adds a generic MacroFusion pass, that is used on X86 and
AArch64, which both define target-specific shouldScheduleAdjacent
functions. This generic pass should make it easier for other targets to
implement macro fusion and I intend to add macro fusion for ARM shortly.
Reviewers: craig.topper, evandro, t.p.northover, atrick, MatzeB
Reviewed By: MatzeB
Subscribers: atrick, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34144
llvm-svn: 305677
Summary:
Scheduling AESE/AESMC and AESD/AESIMC instruction pairs back-to-back
gives a double digit speedup on benchmarks using those instructions on
Cortex-A processors. In GCC, this optimization is part of the generic
processor model as well.
This change should not have a major performance impact on processors
that do not optimize AES instruction pairs, although I only had access
to Cortex-A processors for benchmarking.
Reviewers: rengolin, kristof.beyls, javed.absar, evandro, silviu.baranga, MatzeB, mcrosier, joelkevinjones, joel_k_jones, bmakam, t.p.northover
Reviewed By: evandro
Subscribers: sbaranga, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D33836
llvm-svn: 305457
The "Add/sub (shifted reg)" instructions use the 31 encoding for xzr and wzr
rather than the SP, so we need to use different variants.
Situations where this actually comes up are rare enough (see test-case) that I
think falling back to DAG is fine.
llvm-svn: 305230
Summary: The method TargetTransformInfo::getRegisterBitWidth() is declared const, but the type erasing implementation classes (TargetTransformInfo::Concept & TargetTransformInfo::Model) that were introduced by Chandler in https://reviews.llvm.org/D7293 do not have the method declared const. This is an NFC to tidy up the const consistency between TTI and its implementation.
Reviewers: chandlerc, rnk, reames
Reviewed By: reames
Subscribers: reames, jfb, arsenm, dschuff, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D33903
llvm-svn: 305189
Summary:
- Fix assertion failures on F16 to/from int types in FastISel by falling
back to regular ISel
- Add a testcase of various conversion cases with FastISel (-O0)
Reviewers: kristof.beyls, jmolloy, SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: SjoerdMeijer, llvm-commits, srhines, pirama, aemerson, rengolin, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33734
llvm-svn: 305127
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
- Remove all uses of base sched model entries and set them all to
Unsupported so all the opcodes are described in
AArch64SchedFalkorDetails.td.
- Remove entries for unsupported half-float opcodes.
- Remove entries for unsupported LSE extension opcodes.
- Add entry for MOVbaseTLS (and set Sched in base td file entry to
WriteSys) and a few other pseudo ops.
- Fix a few FP load/store with reg offset entries to use the LSLfast
predicates.
- Add Q size BIF/BIT/BSL entries.
- Fix swapped Q/D sized CLS/CLZ/CNT/RBIT entires.
- Fix pre/post increment address register latency (this operand is
always dest 0).
- Fix swapped FCVTHD/FCVTHS/FCVTDH/FCVTDS entries.
- Fix XYZ resource over usage on LD[1-4] opcodes.
llvm-svn: 304108
- Rewrite livein calculation to use the computeLiveIns() helper
function. This is slightly less efficient but easier to reason about
and doesn't unnecessarily add pristine and reserved registers[1]
- Zero the status register at the beginning of the loop to make sure it
has a defined value.
- Remove kill flags of values that need to stay alive throughout the loop.
[1] An upcoming commit of mine will tighten the MachineVerifier to catch
these.
llvm-svn: 304048
Summary:
This is used in the Linux kernel, and effectively just means "print an
address". This brings back r193593.
Reviewed by: Renato Golin
Reviewers: t.p.northover, rengolin, richard.barton.arm, kristof.beyls
Subscribers: aemerson, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D33558
llvm-svn: 303901
Summary:
This patch makes instruction fusion more aggressive by
* adding artificial edges between the successors of FirstSU and
SecondSU, similar to BaseMemOpClusterMutation::clusterNeighboringMemOps.
* updating PostGenericScheduler::tryCandidate to keep clusters together,
similar to GenericScheduler::tryCandidate.
This change increases the number of AES instruction pairs generated on
Cortex-A57 and Cortex-A72. This doesn't change code at all in
most benchmarks or general code, but we've seen improvement on kernels
using AESE/AESMC and AESD/AESIMC.
Reviewers: evandro, kristof.beyls, t.p.northover, silviu.baranga, atrick, rengolin, MatzeB
Reviewed By: evandro
Subscribers: aemerson, rengolin, MatzeB, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33230
llvm-svn: 303618
This commit fixes a bug introduced in r301019 where optimizeLogicalImm
would replace a logical node's immediate operand that was CSE'd and
was also an operand of another node.
This commit fixes the bug by replacing the logical node instead of its
immediate operand.
rdar://problem/32295276
llvm-svn: 303607
Summary:
This causes them to be re-computed more often than necessary but resolves
objections that were raised post-commit on r301750.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32861
llvm-svn: 303418
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
We don't use section-relative relocations on AArch64, so all symbols must be at
least visible to the linker (i.e. properly global or l_whatever, but not
L_whatever).
llvm-svn: 303118
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
This caused PR33053.
Original commit message:
> The new experimental reduction intrinsics can now be used, so I'm enabling this
> for AArch64. We will need this for SVE anyway, so it makes sense to do this for
> NEON reductions as well.
>
> The existing code to match shufflevector patterns are replaced with a direct
> lowering of the reductions to AArch64-specific nodes. Tests updated with the
> new, simpler, representation.
>
> Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 303115
We were silently ignoring any features we couldn't match up, which led to
errors in an inline asm block missing the conventional "\n\t".
llvm-svn: 303108
This patch enables fusing dependent AESE/AESMC and AESD/AESIMC
instruction pairs on Cortex-A72, as recommended in the Software
Optimization Guide, section 4.10.
llvm-svn: 303073
For stores, check if the stored value is defined by a floating point
instruction and if yes, we return a default mapping with FPR instead
of GPR.
llvm-svn: 302679
The new experimental reduction intrinsics can now be used, so I'm enabling this
for AArch64. We will need this for SVE anyway, so it makes sense to do this for
NEON reductions as well.
The existing code to match shufflevector patterns are replaced with a direct
lowering of the reductions to AArch64-specific nodes. Tests updated with the
new, simpler, representation.
Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 302678
For the ELF case, the default/preferred form is the generic one, not
the short one as used for Apple - fix the comment to say so. Currently
it is a copy-paste typo.
Make the comments on the darwin default a bit more verbose.
Use enum names instead of literal 0/1 to further increase readability
and reduce fragility.
Differential Revision: https://reviews.llvm.org/D32963
llvm-svn: 302634
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
The AArch64 instruction set has a few "widening" instructions (e.g., uaddl,
saddl, uaddw, etc.) that take one or more doubleword operands and produce
quadword results. The operands are automatically sign- or zero-extended as
appropriate. However, in LLVM IR, these extends are explicit. This patch
updates TTI to consider these widening instructions as single operations whose
cost is attached to the arithmetic instruction. It marks extends that are part
of a widening operation "free" and applies a sub-target specified overhead
(zero by default) to the arithmetic instructions.
Differential Revision: https://reviews.llvm.org/D32706
llvm-svn: 302582
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
This fixes PR32550, in a way that does not imply running the greedy
mode at O0.
The fix consists in checking if a load is used by any floating point
instruction and if yes, we return a default mapping with FPR instead
of GPR.
llvm-svn: 302453
In r292478, we changed the order of the enum that is referenced by
PMI_FirstXXX. This had the side effect of changing the cost of the
mapping of all the loads, instead of just the FPRs ones.
Reinstate the higher cost for all but GPR loads.
Note: This did not have any external visible effects:
- For Fast mode, the cost would have been higher, but we don't care
because we don't try to use alternative mappings.
- For Greedy mode, the higher cost of the GPR loads, would have
triggered the use of the supposedly alternative mapping, that
would be in fact the same GPR mapping but with a lower cost.
llvm-svn: 302452
This is a step toward having statically allocated instruciton mapping.
We are going to tablegen them eventually, so let us reflect that in
the API.
NFC.
llvm-svn: 302316
Summary:
Remove the AArch64AddressTypePromotion pass as we migrated all transformations
done in this pass into CGP in r299379.
Reviewers: qcolombet, jmolloy, javed.absar, mcrosier
Reviewed By: qcolombet
Subscribers: aemerson, rengolin, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D31623
llvm-svn: 302245
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301980
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301939
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
llvm-svn: 301666
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Instruction isb takes as an operand either 'sy' or an immediate value. This
improves the diagnostic when the string is not 'sy' and adds a test case for
this which was missing. This also adds tests to check invalid inputs for dsb
and dmb.
Differential Revision: https://reviews.llvm.org/D32227
llvm-svn: 301165
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
The code assumed that when saving an additional CSR register
(ExtraCSSpill==true) we would have a free register throughout the
function. This was not true if this CSR register is also used to pass
values as in the swiftself case.
rdar://31451816
llvm-svn: 301057
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 301019
Factor out the common code used for generating addresses into common
templated functions that call overloaded versions of a new function,
getTargetNode.
Tested with make check-llvm with targets AArch64.
Differential Revision: https://reviews.llvm.org/D32169
llvm-svn: 301005
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
llvm-svn: 300940
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300913, which broke bots because I didn't fix a call to
ShrinkDemandedConstant in SIISelLowering.cpp after changing the APIs of
TargetLoweringOpt and TargetLowering.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300930
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300913
Single-threaded fences aren't required to provide any synchronization with
other processing elements so there's no need for a DMB. They should still be a
barrier for compiler optimizations though.
llvm-svn: 300905
Currently fmov #0 with a vector destination is handle incorrectly and results in
fmov #-1.9375 being emitted but should instead give an error. This is due to the
way we cope with fmov #0 with a scalar destination being an alias of fmov zr, so
fix this by actually doing it through an alias.
Differential Revision: https://reviews.llvm.org/D31949
llvm-svn: 300830
When an integer is used as an fp immediate we're failing to check the return
value of getFP64Imm, so invalid values are silently permitted. Fix this by
merging together the integer and real handling.
llvm-svn: 300828
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300664
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
This reverts r300535 and r300537.
The newly added tests in test/CodeGen/AArch64/GlobalISel/arm64-fallback.ll
produces slightly different code between LLVM versions being built with different compilers.
E.g., dependent on the compiler LLVM is built with, either one of the following
can be produced:
remark: <unknown>:0:0: unable to legalize instruction: %vreg0<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg2; (in function: vector_of_pointers_extractelement)
remark: <unknown>:0:0: unable to legalize instruction: %vreg2<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg0; (in function: vector_of_pointers_extractelement)
Non-determinism like this is clearly a bad thing, so reverting this until
I can find and fix the root cause of the non-determinism.
llvm-svn: 300538
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
llvm-svn: 300535
It's basically a terrible idea anyway but objc_msgSend gets emitted like that.
We can decide on a better way to deal with it in the unlikely event that anyone
actually uses it.
llvm-svn: 300474
It's almost certainly not a good idea to actually use it in most cases (there's
a pretty large code size overhead on AArch64), but we can't do those
experiments until it's supported.
llvm-svn: 300462
This further improves Ahmed's change in rL299482. See the new comment for the
rationale.
The patch recovers most of the regression for bzip2 after D31965. We're down
to +2.68% from +6.97%.
Differential Revision: https://reviews.llvm.org/D32028
llvm-svn: 300276
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
This patch assumes that the dependents to be scanned for the ExitSU are its
predecessors; otherwise, the successors of the instr are scanned.
Furthermore, sometimes the ExitSU was being fused twice, since it may be
fused once when scanning the successors from the beginning of the BB and
then again when scanning the predecessors of ExitSU. Thus, when scanning
the successors of an instr, skip the ExitSU.
llvm-svn: 299974
This patch refactors and strengthens the type checks performed for interleaved
accesses. The primary functional change is to ensure that the interleaved
accesses have valid element types. The added test cases previously failed
because the element type is f128.
Differential Revision: https://reviews.llvm.org/D31817
llvm-svn: 299864
This concludes the refinements to Falkor Machine Model.
It includes SchedPredicates for immediate zero and LSL Fast.
Forwarding logic is also modeled for vector multiply and
accumulate only.
llvm-svn: 299810
When using -ffixed-x18, the x18 (or w18) register can safely be used
with the "global register variable" GCC extension, but the backend
fails to recognize it.
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D31793
llvm-svn: 299799
Summary: This resolves the issue of tablegen-erated includes in the headers for non-GlobalISel builds in a simpler way than before.
Reviewers: qcolombet, ab
Reviewed By: ab
Subscribers: igorb, ab, mgorny, dberris, rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30998
llvm-svn: 299637
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
This improves upon r246462: that prevented FMOVs from being emitted
for the cross-class INSERT_SUBREGs by disabling the formation of
INSERT_SUBREGs of LOAD. But the ld1.s that we started selecting
caused us to introduce partial dependencies on the vector register.
Avoid that by using SCALAR_TO_VECTOR: it's a first-class citizen that
is folded away by many patterns, including the scalar LDRS that we
want in this case.
Credit goes to Adam for finding the issue!
llvm-svn: 299482
This mode is just like -mcmodel=small except that it moves the
thread pointer from TPIDR_EL0 to TPIDR_EL1.
Patch by Roland McGrath.
Differential Revision: https://reviews.llvm.org/D31624
llvm-svn: 299462
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
Summary:
Move the aarch64-type-promotion pass within the existing type promotion framework in CGP.
This change also support forking sexts when a new sext is required for promotion.
Note that change is based on D27853 and I am submitting this out early to provide a better idea on D27853.
Reviewers: jmolloy, mcrosier, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, aemerson, rengolin, mcrosier
Differential Revision: https://reviews.llvm.org/D28680
llvm-svn: 299379
Summary:
This feature enables folding of logical shift operations of up to 3 places into addressing mode on Kryo and Falkor that have a fastpath LSL.
Reviewers: mcrosier, rengolin, t.p.northover
Subscribers: junbuml, gberry, llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D31113
llvm-svn: 299240
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
Summary:
Similar to the ARM target in https://reviews.llvm.org/rL298380, this
patch adds identical infrastructure for disabling negative immediate
conversions, and converts the existing aliases to the new infrastucture.
Reviewers: rengolin, javed.absar, olista01, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D31243
llvm-svn: 298908
We're not to the point of supporting the load/store patterns yet
(because they extensively use PatFrags).
But in the meantime, we can implement some of the simplest addressing
modes.
llvm-svn: 298863
CBZ/CBNZ represent a substantial portion of all conditional branches.
Look through G_ICMP to select them.
We can't use tablegen yet because the existing patterns match an
AArch64ISD node.
llvm-svn: 298856
Among other things, this allows Machine LICM to hoist a costly 'mrs'
instruction from within a loop.
Differential Revision: http://reviews.llvm.org/D31151
llvm-svn: 298851
When I tested r298734, I thought that red zones were enabled by default like in
X86. Since red zones are behind a flag on AArch64 the testing wasn't true.
llvm-svn: 298747
AArch64 doesn't require -mno-red-zone; stack fixups are sufficient here. This was
unnecessarily copied over from the X86 target.
(You can now outline with red zones! Yay!)
Removing the requirement passes all Single/MultiSource tests.
llvm-svn: 298734
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Forgot to remove some output before committing last time. (Instruction fixups
don't actually overflow anywhere in the test suite so far, so I missed it).
To prevent the outliner from screaming "Overflow!" in the event that that
does happen, this commit removes that output.
llvm-svn: 298260
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
This commit adds the necessary target hooks for outlining in AArch64. It also
refactors the switch statement used in `getMemOpBaseRegImmOfsWidth` into a
more general function, `getMemOpInfo`. This allows the outliner to share that
code without copying and pasting it.
The AArch64 outliner can be run using -mllvm -enable-machine-outliner, as with
the X86-64 outliner.
The test for this pass verifies that the outliner does, in fact outline
functions, fixes up the stack accesses properly, and can correctly generate a
tail call. In the future, this test should be replaced with a MIR test, so that
we can properly test immediate offset overflows in fixed-up instructions.
llvm-svn: 298162
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
In fact this default implementation should be the only implementation,
keep it virtual for now to accomodate targets that don't model flags
correctly.
Differential Revision: https://reviews.llvm.org/D30747
llvm-svn: 297980
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
llvm-svn: 297968
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
Summary:
A53 scheduler causes an assertion failure on all CRC instructions:
include/llvm/CodeGen/MachineInstr.h:280: const llvm::MachineOperand
&llvm::MachineInstr::getOperand(unsigned int) const: Assertion `i <
getNumOperands() && "getOperand() out of range!"' failed.
The case statements corresponding to CRC instructions are incorrect and should
be removed.
Also adding a testcase while on this.
Reviewers: t.p.northover, javed.absar, apazos, rengolin
Reviewed By: rengolin
Subscribers: evandro, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D30274
llvm-svn: 297582
In order to make it easier to parse information about the performance of
MacroFusion, this patch adds the function and the instruction names to the
debug output of this pass.
llvm-svn: 297504
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Broadcom Vulcan is now Cavium ThunderX2T99.
LLVM Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32113
Minor fixes for the alignments of loops and functions for
ThunderX T81/T83/T88 (better performance).
Patch was tested with SpecCPU2006.
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D30510
llvm-svn: 297190
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
This patch extends the current functionality of the AArch64 redundant copy
elimination pass to handle CMN instructions as well as a shifted
immediates.
Differential Revision: https://reviews.llvm.org/D30576.
llvm-svn: 297078
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
This is a cleanup/rewrite of the parseSysAlias function. It was not using the
tablegen instruction descriptions, but was “manually” matching the mnemonics
and recreating the operands whereas all this information is already in
tablegen; all this code has been replaced with calls to lookupXYZByName
tablegen calls.
Differential Revision: https://reviews.llvm.org/D30491
llvm-svn: 296857
This patch extends the current functionality of the AArch64 redundant copy
elimination pass to handle non-zero cases such as:
BB#0:
cmp x0, #1
b.eq .LBB0_1
.LBB0_1:
orr x0, xzr, #0x1 ; <-- redundant copy; x0 known to hold #1.
Differential Revision: https://reviews.llvm.org/D29344
llvm-svn: 296809
The CallingConv.td rules allocate 8 bytes for these kinds of arguments
on AAPCS targets, but we were only recording the smaller amount. The
difference is theoretical on AArch64 because we don't actually store
more than the smaller amount, but it's still much better to have these
two components in agreement.
Based on Diana Picus's ARM equivalent patch (where it matters a lot
more).
llvm-svn: 296754
After r296750, we're able to match interleaved accesses having types wider than
128 bits. This patch updates the associated TTI costs.
Differential Revision: https://reviews.llvm.org/D29675
llvm-svn: 296751
This patch teaches (ARM|AArch64)ISelLowering.cpp to match illegal vector types
to interleaved access intrinsics as long as the types are multiples of the
vector register width. A "wide" access will now be mapped to multiple
interleave intrinsics similar to the way in which non-interleaved accesses with
illegal types are legalized into multiple accesses. I'll update the associated
TTI costs (in getInterleavedMemoryOpCost) as a follow-on.
Differential Revision: https://reviews.llvm.org/D29466
llvm-svn: 296750
Until now, we've had to use -global-isel to enable GISel. But using
that on other targets that don't support it will result in an abort, as we
can't build a full pipeline.
Additionally, we want to experiment with enabling GISel by default for
some targets: we can't just enable GISel by default, even among those
target that do have some support, because the level of support varies.
This first step adds an override for the target to explicitly define its
level of support. For AArch64, do that using
a new command-line option (I know..):
-aarch64-enable-global-isel-at-O=<N>
Where N is the opt-level below which GISel should be used.
Default that to -1, so that we still don't enable GISel anywhere.
We're not there yet!
While there, remove a couple LLVM_UNLIKELYs. Building the pipeline is
such a cold path that in practice that shouldn't matter at all.
llvm-svn: 296710
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
This is a cleanup/rewrite of the printSysAlias function. This was not using the
tablegen instruction descriptions, but was "manually" decoding the
instructions. This has been replaced with calls to lookup_XYZ_ByEncoding
tablegen calls.
This revealed several problems. First, instruction IVAU had the wrong encoding.
This was cancelled out by the parser that incorrectly matched the wrong
encoding. Second, instruction CVAP was missing from the SystemOperands tablegen
descriptions, so this has been added. And third, the required target features
were not captured in the tablegen descriptions, so support for this has also
been added.
Differential Revision: https://reviews.llvm.org/D30329
llvm-svn: 296343
There are no instructions that have "[1]" as part of the assembly string;
FMOVXDhighr is out of date. This removes dead code.
Differential Revision: https://reviews.llvm.org/D30165
llvm-svn: 296327
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The Fuchsia ABI defines slots from the thread pointer where the
stack-guard value for stack-protector, and the unsafe stack pointer
for safe-stack, are stored. This parallels the Android ABI support.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D30237
llvm-svn: 296081
Summary:
Extend AArch64RedundantCopyElimination to catch cases where the register
that is known to be zero is COPY'd in the predecessor block. Before
this change, this pass would catch cases like:
CBZW %W0, <BB#1>
BB#1:
%W0 = COPY %WZR // removed
After this change, cases like the one below are also caught:
%W0 = COPY %W1
CBZW %W1, <BB#1>
BB#1:
%W0 = COPY %WZR // removed
This change results in a 4% increase in static copies removed by this
pass when compiling the llvm test-suite. It also fixes regressions
caused by doing post-RA copy propagation (a separate change to be put up
for review shortly).
Reviewers: junbuml, mcrosier, t.p.northover, qcolombet, MatzeB
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D30113
llvm-svn: 295863
Summary:
Rework the code that was sinking/duplicating (icmp and, 0) sequences
into blocks where they were being used by conditional branches to form
more tbz instructions on AArch64. The new code is more general in that
it just looks for 'and's that have all icmp 0's as users, with a target
hook used to select which subset of 'and' instructions to consider.
This change also enables 'and' sinking for X86, where it is more widely
beneficial than on AArch64.
The 'and' sinking/duplicating code is moved into the optimizeInst phase
of CodeGenPrepare, where it can take advantage of the fact the
OptimizeCmpExpression has already sunk/duplicated any icmps into the
blocks where they are used. One minor complication from this change is
that optimizeLoadExt needed to be updated to always mark 'and's it has
determined should be in the same block as their feeding load in the
InsertedInsts set to avoid an infinite loop of hoisting and sinking the
same 'and'.
This change fixes a regression on X86 in the tsan runtime caused by
moving GVNHoist to a later place in the optimization pipeline (see
PR31382).
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: aemerson, mcrosier, sebpop, llvm-commits
Differential Revision: https://reviews.llvm.org/D28813
llvm-svn: 295746
Use tablegen to autogenerate isBranchtarget helper functions. This is a cleanup
that removes almost identical functions that differ only in a few constants.
Differential Revision: https://reviews.llvm.org/D30160
llvm-svn: 295649
When promoting the Load of a Store-Load pair to a COPY all kill flags
between the store and the load need to be cleared.
rdar://30402435
Differential Revision: https://reviews.llvm.org/D30110
llvm-svn: 295512
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
Regression test neon-diagnostics.s needed changing because it now
produces a more specific diagnostic about the immediate ranges. One
change in the expected error message is not obvious, but there multiple
candidate and it happens to pick the immediate diagnostic.
Differential Revision: https://reviews.llvm.org/D29939
llvm-svn: 295331
Uses a Custom implementation because the slot sizes being a multiple of the
pointer size isn't really universal, even for the architectures that do have a
simple "void *" va_list.
llvm-svn: 295255
am_ldrlit diverged from am_brcond in r207105, but kept the OtherVT
operand type. It made sense for branch targets, as those are
represented as MVT::Other in SDAG. But loads operate on pointers.
This shouldn't have an observable effect on any in-tree code, but helps
make the patterns consistent for external users.
llvm-svn: 295229
Functions that have a dynamic alloca require a base register which is defined to
be X19 on AArch64 and r6 on ARM. We have defined the swifterror register to be
the same register. Use a different callee save register for swifterror instead:
X21 on AArch64
R8 on ARM
rdar://30433803
llvm-svn: 294551
We mark X0 as preserved by a call that passes the returned parameter.
x0 = ...
fun(x0) // no implicit def of x0
This no longer is valid if we pass the parameter in a different register then
the returned value as is the case with a swiftself parameter (passed in x20).
x20 = ...
fun(x20) // there should be an implict def of x8
rdar://30425845
llvm-svn: 294527
AArch64 has specific instructions to multiply two numbers at double the width
and produce the high part of the result. These can be used to implement LLVM's
mul.with.overflow instructions fairly simply. Helps with C++ operator new[].
llvm-svn: 294519
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
llvm-svn: 294493
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
AArch64 was asserting when it was asked to provide a register-bank of a size it
couldn't deal with (in this case an s128 IMPLICIT_DEF). But we want a robust
fallback path so this isn't allowed.
llvm-svn: 294248
We don't handle all cases yet (see arm64-fallback.ll for an example), but this
is enough to cover most common C++ code so it's a good place to start.
llvm-svn: 294247
When splitting up one store into several in splitStoreSplat we have to
make sure we get the MachinePointerInfo right, otherwise alias
analysis thinks they all store to the same location. This can then
cause invalid scheduling later on.
Differential Revision: https://reviews.llvm.org/D29446
llvm-svn: 294203
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
This patch moves some helper functions related to interleaved access
vectorization out of LoopVectorize.cpp and into VectorUtils.cpp. We would like
to use these functions in a follow-on patch that improves interleaved load and
store lowering in (ARM/AArch64)ISelLowering.cpp. One of the functions was
already duplicated there and has been removed.
Differential Revision: https://reviews.llvm.org/D29398
llvm-svn: 293788
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, sections 4.14 and 4.15.
Differential revision: https://reviews.llvm.org/D28698
llvm-svn: 293739
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, section 4.13, and on Exynos
M1.
Differential revision: https://reviews.llvm.org/D28491
llvm-svn: 293738
This patch moves the class for scheduling adjacent instructions,
MacroFusion, to the target.
In AArch64, it also expands the fusion to all instructions pairs in a
scheduling block, beyond just among the predecessors of the branch at the
end.
Differential revision: https://reviews.llvm.org/D28489
llvm-svn: 293737
This is an attempt to fix the win7 bot that does not seem to be very
good at infering the type when it gets used in an initiliazer list.
llvm-svn: 293246
Summary: Refine floating point SQRT and DIV with accurate latency information.
Reviewers: mcrosier
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D29191
llvm-svn: 293204
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
Summary:
This patch prepares more for tail call support in XRay. Until the logging part supports tail calls, this is just staging, so it seems LLVM part is mostly ready with this patch.
Related: https://reviews.llvm.org/D28948 (compiler-rt)
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson
Differential Revision: https://reviews.llvm.org/D28947
llvm-svn: 293080
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
In order to follow the pattern of the existing 'slow-misaligned-128store'
option, rename the option 'no-quad-ldst-pairs' to 'slow-paired-128'.
llvm-svn: 292954
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
Re-Commit r292543 with a fix for the situation when the chain end is
MBB.end().
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292705
Kill flags need to be updated correctly when moving stores up/down to
form store pair instructions.
Those invalid flags have been ignored before but as of r290014 they are
recognized when using -mllvm -verify-machineinstrs.
Also simplifies test/CodeGen/AArch64/ldst-opt-dbg-limit.mir, renames it
to ldst-opt.mir test and adds a new tests for this change.
Differential Revision: https://reviews.llvm.org/D28875
llvm-svn: 292625
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292543
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
ARM seems to prefer that long literals be formed from their little end in
order to promote the fusion of the instrs pairs MOV/MOVK and MOVK/MOVK on
Cortex A57 and others (v. "Cortex A57 Software Optimisation Guide", section
4.14).
Differential revision: https://reviews.llvm.org/D28697
llvm-svn: 292422
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Falkor only partially implements the ARMv8.1a extensions, so this patch
refactors the support for the SQRDML[A|S]H instruction into a separate
feature.
Differential Revision: https://reviews.llvm.org/D28681
llvm-svn: 292142
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
Summary:
This allows the function to handle architectures with more than two register banks.
Depends on D27978
Reviewers: ab, t.p.northover, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, aemerson, rengolin, vkalintiris, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27339
llvm-svn: 291902
Summary:
We did lose a little specificity in the assertion messages for the
PartialMappingIdx enumerators in this change but this was necessary to
avoid unnecessary use of 'public:' and we haven't lost anything that
can't be discovered easily in lldb. Once this is tablegen-erated we could
also safely remove the assertions.
Depends on D27976
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, aemerson, rengolin, vkalintiris, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D27978
llvm-svn: 291900
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
llvm-svn: 291770
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
llvm-svn: 291768
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
The original code considered only v2i64 as slow for this feature. This patch
consider all 128-bit long vector types as slow candidates.
In internal tests, extending this feature to all 128-bit vector types
resulted in an overall improvement of 1% on Exynos M1.
Differential revision: https://reviews.llvm.org/D27998
llvm-svn: 291616
Re-apply r288561: This time with a fix where the ADDs that are part of a
3 instruction LOH would not invalidate the "LastAdrp" state. This fixes
http://llvm.org/PR31361
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
This reverts commit 9e6cedb0a4f14364d6511597a9160305e7d34493.
llvm-svn: 291266
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
According to the Cortex-A57 doc, FDIV/FSQRT instructions should use F0 unit
(W-unit in AArch64SchedA57.td, the same as cryptography instructions),
not F1 unit (X-unit in td, like ASIMD absolute diff accum SABA/UABA).
This patch changes FDIV/FSQRT scheduling declarations to use A57UnitW
instead of A57UnitX. Also, latencies for those instructions are
corrected.
Patch by Andrew Zhogin.
llvm-svn: 290426
The InstructionSelect pass will not look at target specific instructions
since they are already selected. As a result, the operands of target
specific instructions must be properly constrained, because it is not
going to fix them.
This fixes invalid register classes on call instruction.
llvm-svn: 290377
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
Re-apply r288561: Liveness tracking should be correct now after r290014.
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 290026
MachineLegalizer used to be the name of both the class and the member,
causing GCC errors. r276522 fixed that by renaming the member to just
'Legalizer'. The 'class' workaround isn't necessary anymore; drop it.
llvm-svn: 289848
This patch checks that the SlowMisaligned128Store subtarget feature is set
when penalizing such stores in getMemoryOpCost.
Differential Revision: https://reviews.llvm.org/D27677
llvm-svn: 289845
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
This is not always behaving as expected as it turns out block live-in
lists are only correct most of the time. Still waiting for reviews on
https://reviews.llvm.org/D27559 to have them correct all of the time.
See also http://llvm.org/PR31361, rdar://25117107
This reverts commit r288567.
This reverts commit r288561.
llvm-svn: 289570
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
llvm-svn: 289566
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
llvm-svn: 288980
There were two problems:
+ AArch64 was reusing random data from its binary op tables, which is
complete nonsense for G_SEQUENCE.
+ Even when AArch64 gave up and said it couldn't handle G_SEQUENCE,
the generic code asserted.
llvm-svn: 288836
Summary:
This is NFC but prevents assertions when PartialMappingIdx is tablegen-erated.
The assumptions were:
1) FirstGPR is 0
2) FirstGPR is the first of the First* enumerators.
GPR32 is changed to 1 to demonstrate that assumption #1 is fixed. #2 will
be covered by a subsequent patch that tablegen-erates information and swaps
the order of GPR and FPR as a side effect.
Depends on D27336
Reviewers: ab, t.p.northover, qcolombet
Subscribers: aemerson, rengolin, vkalintiris, dberris, rovka, llvm-commits
Differential Revision: https://reviews.llvm.org/D27337
llvm-svn: 288812
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
llvm-svn: 288658
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 288561
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Summary:
Make AArch64InstrInfo::foldMemoryOperandImpl more general by folding all
full COPYs between register classes of the same size that are either
spilled or refilled.
Reviewers: MatzeB, qcolombet
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27271
llvm-svn: 288439
This time the issue is fortunately just a simple mistake rather than a horrible
design spectre. I thought SUBS/SBCS provided sufficient NZCV flags for
comparing two 64-bit values, but they don't.
The fix is slightly clunkier in AArch64 because we can't use conditional
execution to emit a pair of CMPs. Traditionally an "icmp ne i128" would map to
an EOR/EOR/ORR/CBNZ, but that uses more registers so it's easier to go with a
CSET/CINC/CBNZ combination. Slightly less efficient, but this is -O0 anyway.
Thanks to Anton Korobeynikov for pointing out the issue.
llvm-svn: 288418
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
Summary:
When computing useful bits for a BFM instruction, we need
to take into consideration the case where both operands
of the BFM are equal and provide data that we need to track.
Not doing this can cause us to miss useful bits.
Fixes PR31138 (https://llvm.org/bugs/show_bug.cgi?id=31138)
Reviewers: t.p.northover, jmolloy
Subscribers: evandro, gberry, srhines, pirama, mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D27130
llvm-svn: 288253
Summary:
In AArch64InstrInfo::foldMemoryOperandImpl, catch more cases where the
COPY being spilled is copying from WZR/XZR, but the source register is
not in the COPY destination register's regclass.
For example, when spilling:
%vreg0 = COPY %XZR ; %vreg0:GPR64common
without this change, the code in TargetInstrInfo::foldMemoryOperand()
and canFoldCopy() that normally handles cases like this would fail to
optimize since %XZR is not in GPR64common. So the spill code generated
would be:
%vreg0 = COPY %XZR
STR %vreg
instead of the new code generated:
STR %XZR
Reviewers: qcolombet, MatzeB
Subscribers: mcrosier, aemerson, t.p.northover, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26976
llvm-svn: 288176
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Summary:
When searching for load/store instructions to pair/merge don't treat
writes to WZR/XZR as clobbers since they don't change the value read
from WZR/XZR (which is always 0).
Reviewers: mcrosier, junbuml, jmolloy, t.p.northover
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26921
llvm-svn: 287592
This patch adds a test for the assembly code emitted with XRay
instrumentation. It also fixes a bug where the operand of a jump
instruction must be not the number of bytes to jump over, but rather the
number of 4-byte instructions.
Author: rSerge
Reviewers: dberris, rengolin
Differential Revision: https://reviews.llvm.org/D26805
llvm-svn: 287516
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
Summary:
Extend replaceZeroVectorStore to handle more vector type stores,
floating point zero vectors and set alignment more accurately on split
stores.
This is a follow-up change to r286875.
This change fixes PR31038.
Reviewers: MatzeB
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26682
llvm-svn: 287142
Doing this before register allocation reduces register pressure as we do
not even have to allocate a register for those dead definitions.
Differential Revision: https://reviews.llvm.org/D26111
llvm-svn: 287076
Lower a = b * C where C = (2^n + 1) * 2^m to
add w0, w0, w0, lsl n
lsl w0, w0, m
Differential Revision: https://reviews.llvm.org/D229245
llvm-svn: 287019
Implement the Newton series for square root, its reciprocal and reciprocal
natively using the specialized instructions in AArch64 to perform each
series iteration.
Differential revision: https://reviews.llvm.org/D26518
llvm-svn: 286907
Summary:
Replace a splat of zeros to a vector store by scalar stores of WZR/XZR.
The load store optimizer pass will merge them to store pair stores.
This should be better than a movi to create the vector zero followed by
a vector store if the zero constant is not re-used, since one
instructions and one register live range will be removed.
For example, the final generated code should be:
stp xzr, xzr, [x0]
instead of:
movi v0.2d, #0
str q0, [x0]
Reviewers: t.p.northover, mcrosier, MatzeB, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26561
llvm-svn: 286875
Summary:
Fix off-by-one indexing error in loop checking that inserted value was a
splat vector.
Add code to check that INSERT_VECTOR_ELT nodes constructing the splat
vector have the expected constant index values.
Reviewers: t.p.northover, jmolloy, mcrosier
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26409
llvm-svn: 286616
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
Under -enable-unsafe-fp-math, SELECT_CC lowering in AArch64
transforms floating point comparisons of the form "a == 0.0 ? 0.0 : x" to
"a == 0.0 ? a : x". But it incorrectly assumes that 'x' and 'a' have
the same type which can lead to a wrong CSEL node that crashes later
due to nonsensical copies.
Differential Revision: https://reviews.llvm.org/D26394
llvm-svn: 286231
Self-referencing PHI nodes need their destination operands to be constrained
because nothing else is likely to do so. For now we just pick a register class
naively.
Patch mostly by Ahmed again.
llvm-svn: 286183
Summary:
Some vector loads and stores generated from AArch64 intrinsics alias each other
unnecessarily, preventing better scheduling. We just need to transfer memory
operands during lowering.
Reviewers: mcrosier, t.p.northover, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26313
llvm-svn: 286168
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
- Fix doxygen file comment
- reduce indentation in loop
- Factor out some common subexpressions
- Move independent helper function out of class
- Fix Changed flag (this is not strictly NFC but a bugfix, but the flag
seems ignored anyway)
llvm-svn: 285488
Since Exynos-M2 improved the FP square root unit a bit over the one in
Exynos-M1, it does not benefit from using the Newton series for such
operations.
llvm-svn: 285246
Add support for estimating the square root or its reciprocal and division or
reciprocal using the combiner generic Newton series.
Differential revision: https://reviews.llvm.org/D25291
llvm-svn: 284986
Summary:
Add relocations for AArch64 ILP32. Includes:
- Addition of definitions for R_AARCH32_*
- Definition of new -target-abi: ilp32
- Definition of data layout string
- Tests for added relocations. Not comprehensive, but matches
existing tests for 64-bit. Renames "CHECK-OBJ" to "CHECK-OBJ-LP64".
- Tests for llvm-readobj
Reviewers: zatrazz, peter.smith, echristo, t.p.northover
Subscribers: aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25159
llvm-svn: 284973
Summary:
The spill size was incorrectly set to 196 bits,
which isn't a multiple of 8. This problem was detected when
experimenting with asserts that the spill size should be a
multiple of the byte size.
New corrected value for the spill size is set to 192 bits.
Note that tablegen (RegisterInfoEmitter) will divide the
size set in the RegisterClass definition by 8. So this
change should not have any impact on the tablegen output
(trunc(192/8) == trunc(196/8) == 24 bytes).
Reviewers: t.p.northover
Subscribers: llvm-commits, aemerson, rengolin
Differential Revision: https://reviews.llvm.org/D25818
llvm-svn: 284814
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
Transform `a == 0.0 ? 0.0 : x` to `a == 0.0 ? a : x` and `a != 0.0 ? x : 0.0`
to `a != 0.0 ? x : a` to avoid materializing 0.0 for FCSEL, since it does not
have to be materialized beforehand for FCMP, as it has a form that has 0.0
as an implicit operand.
Differential Revision: https://reviews.llvm.org/D24808
llvm-svn: 284531
AArch64 actually supports many 8-bit operations under the definition used by
GlobalISel: the designated information-carrying bits of a GPR32 get the right
value if you just use the normal 32-bit instruction.
llvm-svn: 284526
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
This allows RegBankSelect in greedy mode to get rid some of the cross
register bank copies when loads are involved in the chain of
computation.
llvm-svn: 284097
Although Copies are not specific to preISel, we still have to assign them
a proper register class. However, given they are not constrained to
anything we do not have to handle the source register at the copy. It
will be properly mapped when reaching the related definition.
In the process, the handlong of G_ANYEXT is slightly modified as those
end up being selected as copy. The difference is that when register size
do not match on both sides, we need to insert SUBREG_TO_REG operation,
otherwise the post RA copy expansion will not be happy!
llvm-svn: 283972
Allow instructions such as 'cmp w0, #(end - start)' by folding the
expression into a constant. For ELF, we fold only if the symbols are in
the same section. For MachO, we fold if the expression contains only
symbols that are not linker visible.
Fixes https://llvm.org/bugs/show_bug.cgi?id=18920
Differential Revision: https://reviews.llvm.org/D23834
llvm-svn: 283862
This only adds the support for 64-bit vector OR. Adding more sizes is
not difficult, but it requires a bigger refactoring because ORs work on
any size, not necessarly the ones that match the width of the register
width. Right now, this is not expressed in the legalization, so don't
bother pushing the refactoring yet.
llvm-svn: 283831
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
Avoid generating indexed vector instructions for Exynos. This is needed for
fmla/fmls/fmul/fmulx. For example, the instruction
fmla v0.4s, v1.4s, v2.s[1]
is less efficient than the instructions
dup v2.4s, v2.s[1]
fmla v0.4s, v1.4s, v2.4s
Patch written by Abderrazek Zaafrani.
Differential Revision: https://reviews.llvm.org/D21571
llvm-svn: 283663
AArch64InstrInfo::shouldScheduleAdjacent() determines whether two
instruction can benefit from macroop fusion on apple CPUs. The list
turned out to be incomplete:
- the "rr" variants of the instructions were missing
- even the "rs" variants can have shift value == 0 and behave like the
"rr" variants
This also splits the MacropFusion target feature into
ArithmeticBccFusion and ArithmeticCbzFusion.
Differential Revision: https://reviews.llvm.org/D25142
llvm-svn: 283243
Refactor the code so that the same function can be used for all
instructions with all the same operands for up to 3 operands.
This is going to be useful for cast instructions.
NFC.
llvm-svn: 283144
We don't need to have singleton ValueMapping on their own, we can just
reuse one of the elements of the 3-ops mapping.
This allows even more code sharing.
NFC.
llvm-svn: 282959
This uses a TableGen'ed like structure for all 3-operands instrs.
The output of the RegBankSelect pass should be identical but the
RegisterBankInfo will do less dynamic allocations.
llvm-svn: 282817
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282661
This is a step toward statically allocate InstructionMapping. Like the
previous few commits, the goal is to move toward a TableGen'ed like
structure with no dynamic allocation at all.
This should already improve compile time by getting rid of a bunch of
memmove of SmallVectors.
llvm-svn: 282643
Another step toward TableGen'ed like structure for the RegisterBankInfo
of AArch64. By doing this, we also save a bit of compile time for the
exact same output.
llvm-svn: 282550
Summary:
The current implementation of isConstantPhysReg() checks for defs of
physical registers to determine if they are constant. Some
architectures (e.g. AArch64 XZR/WZR) have registers that are constant
and may be used as destinations to indicate the generated value is
discarded, preventing isConstantPhysReg() from returning true. This
change adds a TargetRegisterInfo hook that overrides the no defs check
for cases such as this.
Reviewers: MatzeB, qcolombet, t.p.northover, jmolloy
Subscribers: junbuml, aemerson, mcrosier, rengolin
Differential Revision: https://reviews.llvm.org/D24570
llvm-svn: 282543
Don't match the UXTW extended reg forms of ADD/ADDS/SUB/SUBS if the
32-bit to 64-bit zero-extend can be done for free by taking advantage
of the 32-bit defining instruction zeroing the upper 32-bits of the X
register destination. This enables better instruction selection in a
few cases, such as:
sub x0, xzr, x8
instead of:
mov x8, xzr
sub x0, x8, w9, uxtw
madd x0, x1, x1, x8
instead of:
mul x9, x1, x1
add x0, x9, w8, uxtw
cmp x2, x8
instead of:
sub x8, x2, w8, uxtw
cmp x8, #0
add x0, x8, x1, lsl #3
instead of:
lsl x9, x1, #3
add x0, x9, w8, uxtw
Reviewers: t.p.northover, jmolloy
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24747
llvm-svn: 282413
Many high-performance processors have a dedicated branch predictor for
indirect branches, commonly used with jump tables. As sophisticated as such
branch predictors are, they tend to have well defined limits beyond which
their effectiveness is hampered or even nullified. One such limit is the
number of possible destinations for a given indirect branches that such
branch predictors can handle.
This patch considers a limit that a target may set to the number of
destination addresses in a jump table.
Patch by: Evandro Menezes <e.menezes@samsung.com>, Aditya Kumar
<aditya.k7@samsung.com>, Sebastian Pop <s.pop@samsung.com>.
Differential revision: https://reviews.llvm.org/D21940
llvm-svn: 282412
This is a step toward statically allocate ValueMapping. Like the
previous few commits, the goal is to move toward a TableGen'ed like
structure with no dynamic allocation at all.
llvm-svn: 282324
Statically instanciate the most common PartialMappings. This should
be closer to what the code would look like when TableGen support is
added for GlobalISel. As a side effect, this should improve compile
time.
llvm-svn: 282215
This is another step toward TableGen'ed like structures. The BreakDown of
the mapping of the value will be statically computed by TableGen, thus
we only have to point to the right entry in the table instead of
dynamically allocate the mapping for each instruction.
We still support the dynamic allocation through a factory of
PartialMapping to ease the bring-up of the targets while the TableGen
backend is not available.
llvm-svn: 282213
This commit is basically the first step toward what will
RegisterBankInfo look when it gets TableGen'ed.
It introduces a XXXGenRegisterBankInfo.def file that is what TableGen
will issue at some point. Moreover, the RegBanks field in
RegisterBankInfo changed to reflect the static (compile time) aspect of
the information.
llvm-svn: 282131
We still don't really have an equivalent of "AssertXExt" in DAG, so we don't
exploit the guarantees on the receiving side yet, but this should produce
conservatively correct code on iOS ABIs.
llvm-svn: 282069
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
llvm-svn: 282068
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282057
This reverts part of commit 119e358d9635c8d1f3e7aee67e3ea3b8a62f8db6 by
removing FeatureUseRSqrt et al per request by Eric Christopher
<echristo@gmail.com> (v. http://bit.ly/2cmz6kW).
llvm-svn: 282001
This reverts commit b7d42b0048f65346e9fa37fb65defeea7ce8c337 per request by
Eric Christopher <echristo@gmail.com> (v. http://bit.ly/2cmz6kW).
llvm-svn: 282000
This reverts commit ad8ca1528242e2a4cb363e3779309e70eb7a430e per request by
Eric Christopher <echristo@gmail.com> (v. http://bit.ly/2cmz6kW).
llvm-svn: 281999
This should match the existing behaviour for passing complicated struct and
array types, in particular HFAs come through like that from Clang.
For C & C++ we still need to somehow support all the weird ABI flags, or at
least those that are present in the IR (signext, byval, ...), and stack-based
parameter passing.
llvm-svn: 281977
Whenever an add/sub immediate needs a fixup, we set that immediate field to zero,
which is correct, but we also set the shift bits to zero, which is not true for
instructions that use lsl #12. This patch makes sure that if lsl #12 was used,
it will appear in the encoding of the instruction.
Differential Revision: https://reviews.llvm.org/D23930
llvm-svn: 281898
Recommitting after fixing AsmParser initialization and X86 inline asm
error cleanup.
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281762
We used to only support instructions with same-type operands.
Instead, use the per-register type information to map each
operand more accurately.
llvm-svn: 281734
Currently, the machine combiner can proceed matching when -ffast-math is on.
It should also match when only -ffp-contract=fast is specified as was the
case before when DAGCombiner was doing the job.
Patch by: Abderrazek Zaafrani <a.zaafrani@samsung.com>.
Differential Revision: https://reviews.llvm.org/D24366
llvm-svn: 281649
It was only really there as a sentinel when instructions had to have precisely
one type. Now that registers are typed, each register really has to have a type
that is sized.
llvm-svn: 281599
Otherwise everything that needs to work out what size they are has to keep a
DataLayout handy, which is a bit silly and very annoying.
llvm-svn: 281597
Cleanup/change the code that checks for possible tailcall conventions to
look the same as the one in the X86 target. This makes the distinction
between calling conventions that can guarnatee tailcalls and the ones
that may tailcall more obvious.
- Add Swift to the mayTailCall list
- PreserveMost seemed to be incorrectly part of the guarnteed tail call
list, move it to the mayTailCall list.
llvm-svn: 281376
Recommitting after fixing AsmParser Initialization.
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281336
We currently return 4 for stackmaps and patchpoints, which is very optimistic
and can in rare cases cause the branch relaxation pass to fail to relax certain
branches.
This patch causes getInstSizeInBytes to return a pessimistic estimate of the
size as the number of bytes requested in the stackmap/patchpoint. In the future,
we could provide a more accurate estimate by sharing some of the logic in
AArch64::LowerSTACKMAP/PATCHPOINT.
Fixes part of https://llvm.org/bugs/show_bug.cgi?id=28750
Differential Revision: https://reviews.llvm.org/D24073
llvm-svn: 281301
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281249
Now that MachineBasicBlock::reverse_instr_iterator knows when it's at
the end (since r281168 and r281170), implement
MachineBasicBlock::reverse_iterator directly on top of an
ilist::reverse_iterator by adding an IsReverse template parameter to
MachineInstrBundleIterator. This replaces another hard-to-reason-about
use of std::reverse_iterator on list iterators, matching the changes for
ilist::reverse_iterator from r280032 (see the "out of scope" section at
the end of that commit message). MachineBasicBlock::reverse_iterator
now has a handle to the current node and has obvious invalidation
semantics.
r280032 has a more detailed explanation of how list-style reverse
iterators (invalidated when the pointed-at node is deleted) are
different from vector-style reverse iterators like std::reverse_iterator
(invalidated on every operation). A great motivating example is this
commit's changes to lib/CodeGen/DeadMachineInstructionElim.cpp.
Note: If your out-of-tree backend deletes instructions while iterating
on a MachineBasicBlock::reverse_iterator or converts between
MachineBasicBlock::iterator and MachineBasicBlock::reverse_iterator,
you'll need to update your code in similar ways to r280032. The
following table might help:
[Old] ==> [New]
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
reverse_iterator(I) std::prev(I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(std::next(I)) I.getReverse()
RI.base() std::prev(RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
std::next(RI).base() RI.getReverse()
(For more details, have a look at r280032.)
llvm-svn: 281172
Summary:
An IR load can be invariant, dereferenceable, neither, or both. But
currently, MI's notion of invariance is IR-invariant &&
IR-dereferenceable.
This patch splits up the notions of invariance and dereferenceability at
the MI level. It's NFC, so adds some probably-unnecessary
"is-dereferenceable" checks, which we can remove later if desired.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D23371
llvm-svn: 281151
These instructions were only necessary when type information was stored in the
MachineInstr (because only generic MachineInstrs possessed a type). Now that
it's in MachineRegisterInfo, COPY and PHI work fine.
llvm-svn: 281037
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
llvm-svn: 281035
Fix the .arch asm parser to use the full set of features for the architecture
and any extensions on the command line. Add and update testcases accordingly
as well as add an extension that was used but not supported.
llvm-svn: 280971
They're another source of generic vregs, which are going to need a type on the
definition when we remove the register width from MachineRegisterInfo.
llvm-svn: 280412
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
llvm-svn: 280292
The former is simply wrong -- the code will either never be used or will
always be used, rather than being dependent upon whether it's built with
debug assertions enabled.
The macro DEBUG isn't ever set by the llvm build system. But, the macro
DEBUG(X) is defined (unconditionally) if you happen to include
llvm/Support/Debug.h.
The code in Value.h which was erroneously protected by the #ifdef DEBUG
didn't even compile -- you can't cast<> from an LLVMOpaqueValue
directly. Fortunately, it was never invoked, as Core.cpp included
Value.h before Debug.h.
The conditionalized code in AArch64CollectLOH.cpp was previously always
used, as it includes Debug.h.
llvm-svn: 280056
There should be no functional change here, I'm just making the implementation
of "frem" (to libcall) legalization easier for a followup.
llvm-svn: 279987
In the code to detect fixed-point conversions and make use of AArch64's special
instructions, we weren't prepared for weird types. The fptosi direction got
fixed recently, but not the similar sitofp code.
llvm-svn: 279852
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
It's unclear how the old
%res(32) = G_ICMP { s32, s32 } intpred(eq), %0, %1
is actually different from an s1 verison
%res(1) = G_ICMP { s1, s32 } intpred(eq), %0, %1
so we'll remove it for now.
llvm-svn: 279843
The 32-bit variants of these operations don't depend on the bits not being
operated on, so they also naturally model operations narrower than the actual
register width.
llvm-svn: 279760
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
llvm-svn: 279698
This patch changes LLVM_CONSTEXPR variable declarations to const
variable declarations, since LLVM_CONSTEXPR expands to nothing if the
current compiler doesn't support constexpr. In all of the changed
cases, it looks like the code intended the variable to be const instead
of sometimes-constexpr sometimes-not.
llvm-svn: 279696
Instructions like G_ICMP have multiple types that may need to be legalized (the
boolean output and nearly arbitrary inputs in this case). So the legalizer must
be capable of deciding what to do for each of them separately.
llvm-svn: 279554
branches
Looping over all terminators exposed AArch64 tests hitting
an assert from analyzeBranch failing. I believe these cases
were miscompiled before.
e.g.
fcmp s0, s1
b.ne LBB0_1
b.vc LBB0_2
b LBB0_2
LBB0_1:
; Large block
LBB0_2:
; ...
Both of the individual conditional branches need to
be expanded, since neither can reach the final block.
Split the original block into ones which analyzeBranch
will be able to understand.
llvm-svn: 279499
The structs BarrierOp, PrefetchOp, PSBHintOp are in AArch64AsmParser.cpp
(inside anonymous namespace). This diff changes the order of fields and
removes the excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279173
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
Remove an unnecessary round-trip:
iterator => operator->() => getIterator()
In some cases, the iterator is end(), so the dereference of operator->
is invalid (UB).
The testcase only crashes with r278974 (currently reverted to
investigate this), which adds an assertion for invalid dereferences of
ilist nodes.
Fixes PR29035.
llvm-svn: 279104
There is no REM instruction; that will require an expansion.
It's not obvious that should be done in select, rather than as a
(custom?) legalization.
llvm-svn: 279074
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Trunk would try to create something like "stp x9, x8, [x0], #512", which isn't actually a valid instruction.
Differential revision: https://reviews.llvm.org/D23368
llvm-svn: 278559
This re-factoring could cause the following slight changes in generated
code, though none were observed during testing:
- MachineScheduler could decide not to cluster some loads/stores if
there are other load/stores with non-pairable opcodes that have the
same base register and offset as a pairable set of load/stores. One
case of different MachineScheduler pairing did show up in my testing,
but it wasn't due to this issue, but due
BaseMemOpClusterMutation::clusterNeighboringMemOps() being unstable
w.r.t. the order it considers memory operations. See PR28942.
- The ImplicitNullChecks optimization could be done for more load/store
opcodes. This optimization isn't done for C/C++ code, so it didn't
show up in my testing.
Reviewers: mcrosier, t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D23365
llvm-svn: 278515
Summary:
The DAG combine transformation that was generating the
aarch64_neon_vcvtfp2fxs node was assuming that all
inputs where legal and wasn't accounting that the input
could be a v4f64 if we're trying to do the transformation
before legalization. We now bail out in this case.
All illegal types besides v4f64 were already rejected.
Fixes https://llvm.org/bugs/show_bug.cgi?id=28877.
Reviewers: jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23261
llvm-svn: 278002
These are the operations that are trivially identical. Division is omitted for
now because you need to use the correct sign/zero extension.
llvm-svn: 277775
We were relying on the misleadingly-names $status result to actually be the
status. Actually it's just a scratch register that may or may not be valid (and
is the inverse of the real ststus anyway). Success can be determined by
comparing the value loaded against the one we wanted to see for "cmpxchg
strong" loops like this.
Should fix PR28819.
llvm-svn: 277513
We currently use and test these, and select most of them. Mark them
as legal even though we don't go through the full ir->asm flow yet.
This doesn't currently have standalone tests, but the verifier will
soon learn to check that the regbankselect/select tests are legal.
llvm-svn: 277471
The branch relaxation pass is computing the wrong offsets because it assumes
TLSDESC_CALLSEQ eats up 4 bytes, when in fact it is lowered to an instruction
sequence taking up 16 bytes. This can become a problem in huge files with lots
of TLS accesses, as it may slowly move branch targets out of the range computed
by the branch relaxation pass.
Fixes PR24234 https://llvm.org/bugs/show_bug.cgi?id=24234
Differential Revision: https://reviews.llvm.org/D22870
llvm-svn: 277331
Initialize all AArch64-specific passes in the TargetMachine so they can be run
by llc. This can lead to conflicts in opt with some command line options that
share the same name as the pass, so I took this opportunity to do some cleanups:
* rename all relevant command line options from "aarch64-blah" to
"aarch64-enable-blah" and update the tests accordingly
* run clang-format on their declarations
* move all these declarations to a common place (the TargetMachine) as opposed
to having them scattered around (AArch64BranchRelaxation and
AArch64AddressTypePromotion were the only offenders)
llvm-svn: 277322
For MachineInstrBuilder, having to manually use RegState::Define is ugly and
makes register definitions clunkier than they need to be, so this adds two
convenience functions: addDef and addUse.
For MachineIRBuilder, we want to avoid BuildMI's first-reg-is-def rule because
it's hidden away and causes bugs. So this patch switches buildInstr to
returning a MachineInstrBuilder and adding *all* operands via addDef/addUse.
NFC.
llvm-svn: 277176
Mostly straightforward as we ignore addressing modes and just
use the base + unsigned immediate offset (always 0) variants.
This currently fails to select extloads because we have yet to
agree on a representation.
llvm-svn: 277171
This adds a target hook getInstSizeInBytes to TargetInstrInfo that a lot of
subclasses already implement.
Differential Revision: https://reviews.llvm.org/D22885
llvm-svn: 277126
LLT() has a particular meaning: it's one invalid type. But we really
want selected instructions to have no type whatsoever.
Also verify that types don't linger after ISel, and enable the verifier
on the AArch64 select test.
llvm-svn: 277001
Add unittest to {ARM | AArch64}TargetParser,and by the way correct problems as below:
1.Correct a incorrect indexing problem in AArch64TargetParser. The architecture enumeration
is shared across ARM and AArch64 in original implementation.But In the code,I just used the
index which was offset by the ARM, and this would index into the array incorrectly. To make
AArch64 has its own arch enum,or we will do a lot of slowly iterating.
2.Correct a spelling error. The parameter of llvm::AArch64::getArchExtName.
3.Correct a writing mistake, in llvm::ARM::parseArchISA.
Differential Revision: https://reviews.llvm.org/D21785
llvm-svn: 276957
They're basically i64 for AArch64, but we'll leave them intact for stranger
targets. Also add some tests for the (very few) other cases we can handle right
now.
llvm-svn: 276689
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
This adds the actual MachineLegalizeHelper to do the work and a trivial pass
wrapper that legalizes all instructions in a MachineFunction. Currently the
only transformation supported is splitting up a vector G_ADD into one acting on
smaller vectors.
llvm-svn: 276461
when constraint "w" is used on a 32-bit operand.
This enables compiling the following code, which used to error out in
the backend:
void foo1(int a) {
asm volatile ("sqxtn h0, %s0\n" : : "w"(a):);
}
Fixes PR28633.
llvm-svn: 276344
Summary:
This change also changes findMatchingInsn and
findMatchingUpdateInsnForward to take DBG_VALUE opcodes into account
when tracking register defs and uses, which could potentially inhibit
these optimizations in the presence of debug information.
Reviewers: mcrosier
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22582
llvm-svn: 276293
At -O0, cmpxchg survives AtomicExpand: it's mostly straightforward
to select it in fast-isel, and let the pseudo be expanded later.
extractvalues on the result are the tricky part: the generic logic
only works for legal types (and it would be painful to make it
support illegal types), so we can only support i32/i64 cmpxchg.
llvm-svn: 276183
This should be all the low-level instruction selection needs to determine how
to implement an operation, with the remaining context taken from the opcode
(e.g. G_ADD vs G_FADD) or other flags not based on type (e.g. fast-math).
llvm-svn: 276158
Inference of the 'returned' attribute was fixed in r276008, lets try
turning the backend support back on.
This reverts commit r275677.
llvm-svn: 276081
r275042 reverted function-attribute inference for the 'returned' attribute
because the feature triggered self-hosting failures on ARM and AArch64. James
Molloy determined that the this-return argument forwarding feature, which
directly ties the returned input argument to the returned value, was the cause.
It seems likely that this forwarding code contains, or triggers, a subtle bug.
Disabling for now until we can track that down.
llvm-svn: 275677
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Summary:
Previously we took an unsigned.
Hooray for type-safety.
Reviewers: chandlerc
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D22282
llvm-svn: 275591
If a subtarget has both ZCZeroing and CustomCheapAsMoveHandling features (now
only Kryo has both), set COPY (W|X)ZR isAsCheapAsAMove.
Differential Revision: http://reviews.llvm.org/D22360
llvm-svn: 275503
Summary:
Make the target-specific flags in MachineMemOperand::Flags real, bona
fide enum values. This simplifies users, prevents various constants
from going out of sync, and avoids the false sense of security provided
by declaring static members in classes and then forgetting to define
them inside of cpp files.
Reviewers: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22372
llvm-svn: 275451
Summary:
- Give it a shorter name (because we're going to refer to it often from
SelectionDAG and friends).
- Split the flags and alignment into separate variables.
- Specialize FlagsEnumTraits for it, so we can do bitwise ops on it
without losing type information.
- Make some enum values constants in MachineMemOperand instead.
MOMaxBits should not be a valid Flag.
- Simplify some of the bitwise ops for dealing with Flags.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22281
llvm-svn: 275438
If a subtarget has both ZCZeroing and CustomCheapAsMoveHandling features (now
only Kryo has both), set FMOVS0 and FMOVD0 isAsCheapAsAMove.
Differential Revision: http://reviews.llvm.org/D22256
llvm-svn: 275178
Avoid implicit conversions from MachineInstrBundleInstr to MachineInstr*
in the AArch64 backend, mainly by preferring MachineInstr& over
MachineInstr* when a pointer isn't nullable.
llvm-svn: 274924
Stop using an implicit conversion from the return of
MachineBasicBlock::getFirstTerminator to MachineInstr*. In two cases,
directly dereference to a MachineInstr& since later code assumes it's
valid. In a third case, change to an iterator since later code checks
against MachineBasicBlock::end.
Although the fix for the third case avoids undefined behaviour, I expect
this doesn't cause a functionality change in practice (since the basic
block already has a terminator).
llvm-svn: 274898
Support for the macro fusion of simple ALU ops with branches for the Vulcan sub-target.
Patch by Meador Inge <meadori@gmail.com>
Differential Revision: http://reviews.llvm.org/D22042
llvm-svn: 274837
The commit reinstates r273279, which was informally approved.
Original Review: http://reviews.llvm.org/D21414
This reverts commit ca632c91aaa7cafc50942f890c49f727a046ace1.
llvm-svn: 274790
On CPUs with the zero cycle zeroing feature enabled "movi v.2d" should
be used to zero a vector register. This was previously done at
instruction selection time, however the register coalescer sometimes
widened multiple vregs to the Q width because of that leading to extra
spills. This patch leaves the decision on how to zero a register to the
AsmPrinter phase where it doesn't affect register allocation anymore.
This patch also sets isAsCheapAsAMove=1 on FMOVS0, FMOVD0.
This fixes http://llvm.org/PR27454, rdar://25866262
Differential Revision: http://reviews.llvm.org/D21826
llvm-svn: 274686
findScratchNonCalleeSaveRegister() just needs a simple liveness
analysis, use LivePhysRegs for that as it is simpler and does not depend
on the kill flags.
This commit adds a convenience function available() to LivePhysRegs:
This function returns true if the given register is not reserved and
neither the register nor any of its aliases are alive.
Differential Revision: http://reviews.llvm.org/D21865
llvm-svn: 274685
I think the Ops filled out by Regex::match contain pointers into the temporary
std::string returned by StringRef::upper. Its lifetime is extended by the call
to match, but only until the end of that call (not to the uses of Ops later
on).
llvm-svn: 274586
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
This reverts commit r259387 because it inserts illegal code after legalization
in some backends where i64 OR type is illegal for example.
llvm-svn: 274573
The other use really does only care about the SDNode (it checks the
opcode against a whitelist), but bitFieldPlacement can be misled if
the node produces multiple results.
Patch by Ismail Badawi.
llvm-svn: 274567
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
TargetSubtargetInfo::overrideSchedPolicy takes two MachineInstr*
arguments (begin and end) that invite implicit conversions from
MachineInstrBundleIterator. One option would be to change their type to
an iterator, but since they don't seem to have been used since the API
was added in 2010, I'm deleting the dead code.
llvm-svn: 274304
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
Summary:
Code generation for Cortex-A72/Cortex-A73 was accidentally changed
by r271555, which was a NFCI. The isCortexA57() predicate was not true
for Cortex-A72/Cortex-A73 before r271555 (since it was checking the CPU
string). Because Cortex-A72/Cortex-A73 inherit all features from Cortex-A57,
all decisions previously guarded by isCortexA57() are now taken.
This change restores the behaviour before r271555 by adding separate
ProcA72/ProcA73, which have the required features to preserve code
generation.
Reviewers: kristof.beyls, aadg, mcrosier, rengolin
Subscribers: mcrosier, llvm-commits, aemerson, t.p.northover, MatzeB, rengolin
Differential Revision: http://reviews.llvm.org/D21182
llvm-svn: 273277
The backend has been around for years, it's pretty ridiculous that we can't
even use the preferred form for printing "MOV" aliases. Unfortunately, TableGen
can't handle the complex predicates when printing so it's a bunch of nasty C++.
Oh well.
llvm-svn: 272865
Of course the assembly was right but because the opcode was MOVZWi it was
encoded as "movz w16, #65535, lsl #32" which is an unallocated encoding and
would go horribly wrong on a CPU.
No idea how this bug survived this long. It seems nobody is using that aspect
of patchpoints.
llvm-svn: 272831
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Add support to the AArch64 IAS for the `.arch` directive. This allows the
assembly input to use architectural functionality in part of a file. This is
used in existing code like BoringSSL.
Resolves PR26016!
llvm-svn: 272241
Teach AArch64RegisterBankInfo that G_OR can be mapped on either GPR or
FPR for 64-bit or 32-bit values.
Add test cases demonstrating how this information is used to coalesce a
computation on a single register bank.
llvm-svn: 272170
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
The cost of a copy may be different based on how many bits we have to
copy around. E.g., a 8-bit copy may be different than a 32-bit copy.
llvm-svn: 272084
We were assuming all SBFX-like operations would have the shl/asr form, but often
when the field being extracted is an i8 or i16, we end up with a
SIGN_EXTEND_INREG acting on a shift instead.
This is a port of r213754 from ARM to AArch64.
llvm-svn: 271677
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
Testing for specific CPUs has a number of problems, better use subtarget
features:
- When some tweak is added for a specific CPU it is often desirable for
the next version of that CPU as well, yet we often forget to add it.
- It is hard to keep track of checks scattered around the target code;
Declaring all target specifics together with the CPU in the tablegen
file is a clear representation.
- Subtarget features can be tweaked from the command line.
To discourage people from using CPU checks in the future I removed the
isCortexXX(), isCyclone(), ... functions. I added an getProcFamily()
function for exceptional circumstances but made it clear in the comment
that usage is discouraged.
Reformat feature list in AArch64.td to have 1 feature per line in
alphabetical order to simplify merging and sorting for out of tree
tweaks.
No functional change intended.
Differential Revision: http://reviews.llvm.org/D20762
llvm-svn: 271555
Summary:
If the target requests it, use emptry spaces in the fixed and
callee-save stack area to allocate local stack objects.
AArch64: Change last callee-save reg stack object alignment instead of
size to leave a gap to take advantage of above change.
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: rengolin, mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D20220
llvm-svn: 271527
A constant pool holding the address of a variable in equivalent to
a got entry. It produces exactly the same instruction sequence as a
got use and unlike a got use this is not uniqued by the linker.
llvm-svn: 271311
Canonicalize (srl (bswap i32 x), 16) to (rotr (bswap i32 x), 16), if the high
16-bits of x are zero. Similarly, canonicalize (srl (bswap i64 x), 32) to
(rotr (bswap i64 x), 32), if the high 32-bits of x are zero.
test_rev_w_srl16: test_rev_w_srl16:
and w8, w0, #0xffff and w8, w0, #0xffff
rev w8, w8 ---> rev16 w0, w8
lsr w0, w8, #16
test_rev_x_srl32: test_rev_x_srl32:
rev x8, x8 ---> rev32 x0, x8
lsr x0, x8, #32
llvm-svn: 270896
If and only if the value being inserted sets only known zero bits.
This combine transforms things like
and w8, w0, #0xfffffff0
movz w9, #5
orr w0, w8, w9
into
movz w8, #5
bfxil w0, w8, #0, #4
The combine is tuned to make sure we always reduce the number of instructions.
We avoid churning code for what is expected to be performance neutral changes
(e.g., converted AND+OR to OR+BFI).
Differential Revision: http://reviews.llvm.org/D20387
llvm-svn: 270846
Summary:
As this optimization converts two loads into one load with two shift instructions,
it could potentially hurt performance if a loop is arithmetic operation intensive.
Reviewers: t.p.northover, mcrosier, jmolloy
Subscribers: evandro, jmolloy, aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20172
llvm-svn: 270251
Mask0Imm and ~Mask1Imm must be equivalent and one of the MaskImms is a shifted
mask (e.g., 0x000ffff0). Both 'and's must have a single use.
This changes code like:
and w8, w0, #0xffff000f
and w9, w1, #0x0000fff0
orr w0, w9, w8
into
lsr w8, w1, #4
bfi w0, w8, #4, #12
llvm-svn: 270063
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
Summary:
Fix bug in MachO path where a frame index offset would not be reserved
for handling large frames when an extra non-used callee-save register
was saved. In the case where the extra register is reserved or not a
GPR (e.g. %FP in the MachO case), this would lead to the register
scavenger later failing when called from PrologEpilogInserter.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20185
llvm-svn: 269697
Most immediates are printed in Aarch64InstPrinter using 'formatImm' macro,
but not all of them.
Implementation contains following rules:
- floating point immediates are always printed as decimal
- signed integer immediates are printed depends on flag settings
(for negative values 'formatImm' macro prints the value as i.e -0x01
which may be convenient when imm is an address or offset)
- logical immediates are always printed as hex
- the 64-bit immediate for advSIMD, encoded in "a🅱️c:d:e:f:g:h" is always printed as hex
- the 64-bit immedaite in exception generation instructions like:
brk, dcps1, dcps2, dcps3, hlt, hvc, smc, svc is always printed as hex
- the rest of immediates is printed depends on availability
of -print-imm-hex
Signed-off-by: Maciej Gabka <maciej.gabka@arm.com>
Signed-off-by: Paul Osmialowski <pawel.osmialowski@arm.com>
Differential Revision: http://reviews.llvm.org/D16929
llvm-svn: 269446
This one has a lot of code churn, but it's all mechanical and
straightforward.
- Where we were returning a node before, call ReplaceNode instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
- Where we were calling SelectNodeTo, just return afterwards.
Part of llvm.org/pr26808.
llvm-svn: 269379
For narrow stores (e.g., strb, srth) we know the upper bits of the register are
unused/not useful. In some cases we can use this information to eliminate
unnecessary instructions.
For example, without this patch we generate (from the 2nd test case):
ldr w8, [x0]
and w8, w8, #0xfff0
bfxil w8, w2, #16, #4
strh w8, [x1]
and after the patch the 'and' is removed:
ldr w8, [x0]
bfxil w8, w2, #16, #4
strh w8, [x1]
ret
During the lowering of the bitfield insert instruction the 'and' is eliminated
because we know the upper 16-bits that are masked off are unused and the lower
4-bits that are masked off are overwritten by the insert itself. Therefore, the
'and' is unnecessary.
Differential Revision: http://reviews.llvm.org/D20175
llvm-svn: 269226
Summary: When emitting comparison for fp16, in addition to promote the LHS and RHS to fp32, we need to change the VT as well.
Reviewers: t.p.northover
Subscribers: t.p.northover, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D19922
llvm-svn: 269151
Unlike xN/wN, the size of vN is genuinely ambiguous in the assembly, so we
should try to infer what was intended from the type. But only down to 64-bits
(vN can never represent sN, hN or bN).
llvm-svn: 269132
SystemZ (and probably other targets as well) can fold a memory operand
by changing the opcode into a new instruction that as a side-effect
also clobbers the CC-reg.
In order to do this, liveness of that reg must first be checked. When
LIS is passed, getRegUnit() can be called on it and the right
LiveRange is computed on demand.
Reviewed by Matthias Braun.
http://reviews.llvm.org/D19861
llvm-svn: 269026
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
Summary:
This implements the lowering of the X constraint on
AArch64.
The default behaviour of the X constraint lowering is to
restrict it to "f". This is a problem because the "f"
constraint is not implemented on AArch64 and would be too
restrictive anyway. Therefore, the AArch64 hook will
lower this to "w" (if the operand is a floating point or
vector) or "r" otherwise.
The implementation is similar with the one added for
ARM (r267411).
This is the AArch64 side of the fix for http://llvm.org/PR26493
Reviewers: rengolin
Subscribers: aemerson, rengolin, llvm-commits, t.p.northover
Differential Revision: http://reviews.llvm.org/D19967
llvm-svn: 268907
Summary:
If a function needs to allocate both callee-save stack memory and local
stack memory, we currently decrement/increment the SP in two steps:
first for the callee-save area, and then for the local stack area. This
changes the code to allocate them both at once at the very beginning/end
of the function. This has two benefits:
1) there is one fewer sub/add micro-op in the prologue/epilogue
2) the stack adjustment instructions act as a scheduling barrier, so
moving them to the very beginning/end of the function increases post-RA
scheduler's ability to move instructions (that only depend on argument
registers) before any of the callee-save stores
This change can cause an increase in instructions if the original local
stack SP decrement could be folded into the first store to the stack.
This occurs when the first local stack store is to stack offset 0. In
this case we are trading off one more sub instruction for one fewer sub
micro-op (along with benefits (2) and (3) above).
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18619
llvm-svn: 268746
Summary: This change refactors to decouple the zero store promotion from the narrow ld merge and add a flag (enable-narrow-ld-merge=true) to control the narrow ld merge optimization.
Reviewers: jmolloy, t.p.northover, mcrosier
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19885
llvm-svn: 268744
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
This patch adds support for estimating the square root, its reciprocal and
division or reciprocal using the combiner generic reciprocal machinery.
llvm-svn: 268539
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
llvm-svn: 268336
transferSuccessors() would LoadCmpBB a successor of DoneBB,
whereas it should be a successor of the original MBB.
Follow-up to r266339.
Unfortunately, it's tricky to catch this in the verifier.
llvm-svn: 267779
This change adds a new hook for estimating the cost of vector extracts followed
by zero- and sign-extensions. The motivating example for this change is the
SMOV and UMOV instructions on AArch64. These instructions move data from vector
to general purpose registers while performing the corresponding extension
(sign-extend for SMOV and zero-extend for UMOV) at the same time. For these
operations, TargetTransformInfo can assume the extensions are free and only
report the cost of the vector extract. The SLP vectorizer has been updated to
make use of the new hook.
Differential Revision: http://reviews.llvm.org/D18523
llvm-svn: 267725
Summary:
We don't use MinLatency any more since r184032.
Reviewers: atrick, hfinkel, mcrosier
Differential Revision: http://reviews.llvm.org/D19474
llvm-svn: 267502
log2(Mask) is smaller than 32, we must use the 32-bit variant because the 64-bit
variant cannot encode it. Therefore, set the subreg part accordingly.
[AArch64] Fix optimizeCondBranch logic.
The opcode for the optimized branch does not depend on the size
of the activate bits in the AND masks, but the AND opcode itself.
Indeed, we need to use a X or W variant based on the AND variant
not based on whether the mask fits into the related variant.
Otherwise, we may end up using the W variant of the optimized branch
for 64-bit register inputs!
This fixes the last make check verifier issues for AArch64: PR27479.
llvm-svn: 267465
The original patch caused crashes because it could derefence a null pointer
for SelectionDAGTargetInfo for targets that do not define it.
Evaluates fmul+fadd -> fmadd combines and similar code sequences in the
machine combiner. It adds support for float and double similar to the existing
integer implementation. The key features are:
- DAGCombiner checks whether it should combine greedily or let the machine
combiner do the evaluation. This is only supported on ARM64.
- It gives preference to throughput over latency: the heuristic used is
to combine always in loops. The targets decides whether the machine
combiner should optimize for throughput or latency.
- Supports for fmadd, f(n)msub, fmla, fmls patterns
- On by default at O3 ffast-math
llvm-svn: 267328
The opcode for the optimized branch does not depend on the size
of the activate bits in the AND masks, but the AND opcode itself.
Indeed, we need to use a X or W variant based on the AND variant
not based on whether the mask fits into the related variant.
Otherwise, we may end up using the W variant of the optimized branch
for 64-bit register inputs!
This fixes the last make check verifier issues for AArch64: PR27479.
llvm-svn: 267206
We used to simply set the kill flags to true when transforming a scalar
instruction to a vector one.
SrcScalar1 = copy SrcVector1
... = opScalar SrcScalar1
=>
SrcScalar1 = copy SrcVector1
... = opVector SrcVector1<kill>
This is obviously wrong. The proper update consists in:
1. Propagate the kill status from the copy to the new opVector
2. Reset the kill status on the copy, since the live-range of
SrcVector1 got extended.
This fixes some of the machine verifier errors for AArch64 with make check.
llvm-svn: 267180
Evaluates fmul+fadd -> fmadd combines and similar code sequences in the
machine combiner. It adds support for float and double similar to the existing
integer implementation. The key features are:
- DAGCombiner checks whether it should combine greedily or let the machine
combiner do the evaluation. This is only supported on ARM64.
- It gives preference to throughput over latency: the heuristic used is
to combine always in loops. The targets decides whether the machine
combiner should optimize for throughput or latency.
- Supports for fmadd, f(n)msub, fmla, fmls patterns
- On by default at O3 ffast-math
llvm-svn: 267098
AArch64InstrInfo::optimizeCompareInstr has bug PR27158 which causes generation of incorrect code.
A compare instruction is substituted with another instruction which does not
produce the same flags as the original compare instruction.
This patch contains:
1. Fix of the bug.
2. A regression test in MIR.
3. A new test to check that SUBS is replaced by SUB.
Differential Revision: http://reviews.llvm.org/D18838
llvm-svn: 266969
Both AArch64 and ARM support llvm.<arch>.thread.pointer intrinsics that
just return the thread pointer. I have a pending patch that does the same
for SystemZ (D19054), and there are many more targets that could benefit
from one.
This patch merges the ARM and AArch64 intrinsics into a single target
independent one that will also be used by subsequent targets.
Differential Revision: http://reviews.llvm.org/D19098
llvm-svn: 266818
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
This improves AA in the MI schduler when reason about paired instructions.
Phabricator Revision: http://reviews.llvm.org/D17098
PR26358
llvm-svn: 266462
Summary:
Without MMOs, the callee-save load/store instructions were treated as
volatile by the MI post-RA scheduler and AArch64LoadStoreOptimizer.
Reviewers: t.p.northover, mcrosier
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17661
llvm-svn: 266439
Perform store clustering just like load clustering. This change add
StoreClusterMutation in machine-scheduler. To control StoreClusterMutation,
added enableClusterStores() in TargetInstrInfo.h. This is enabled only on
AArch64 for now.
This change also add support for unscaled stores which were not handled in
getMemOpBaseRegImmOfs().
llvm-svn: 266437
FastRegAlloc works only at the basic-block level and spills all live-out
registers. Unfortunately for a stack-based cmpxchg near the spill slots, this
can perpetually clear the exclusive monitor, which means the cmpxchg will never
succeed.
I believe the only way to handle this within LLVM is by expanding the loop
post-regalloc. We don't want this in general because it severely limits the
optimisations that can be done, so we limit this to -O0 compilations.
It's an ugly hack, and about the one good point in the whole mess is that we
can treat all cmpxchg operations in the most naive way possible (seq_cst, no
clrex faff) without affecting correctness.
Should fix PR25526.
llvm-svn: 266339
Rafael Espindola