We have too many mechanisms for tracking the various offsets
used for kernel arguments, so remove one. There's still a lot of
confusion with these because there are two different "implicit"
argument areas located at the beginning and end of the kernarg
segment.
Additionally, the offset was determined based on the memory
size of the split element types. This would break in a future
commit where v3i32 is decomposed into separate i32 pieces.
llvm-svn: 335830
In principle nothing should stop these from working, but
work is necessary to create an ABI for dealing with the stack
related registers.
llvm-svn: 335829
Just fix the crash for now by not doing the optimization since
figuring out how to properly convert the bits for an arbitrary
struct is a pain.
Also fix a crash when there is only an empty struct argument.
llvm-svn: 335827
These are all benign races and only visible in !NDEBUG. tsan complains
about it, but a simple atomic bool is sufficient to make it happy.
llvm-svn: 335823
SCCP does not change the CFG, so we can mark it as preserved.
Reviewers: dberlin, efriedma, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D47149
llvm-svn: 335820
If a trunc has a user in a block which is not reachable from entry,
we can safely perform trunc elimination as if this user didn't exist.
llvm-svn: 335816
Remove unused ByteStreamer argument from function emitDebugLocValue.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D48590
llvm-svn: 335811
This more efficient for the isel table generator since we can use CheckChildInteger instead of MoveChild, CheckPredicate, MoveParent. This reduced the table size by 1-2K.
I wish there was a way to share the values with X86BaseInfo.h and still use a PatFrag like this. These numbers are fixed by the X86 intrinsic spec going back many years and we should never need to change them. So we shouldn't waste table bytes to support sharing.
llvm-svn: 335806
BMI2 added new shift by register instructions that have the ability to fold a load.
Normally without doing anything special isel would prefer folding a load over folding an immediate because the load folding pattern has higher "complexity". This would require an instruction to move the immediate into a register. We would rather fold the immediate instead and have a separate instruction for the load.
We used to enforce this priority by artificially lowering the complexity of the load pattern.
This patch changes this to instead reject the load fold in isProfitableToFoldLoad if there is an immediate. This is more consistent with other binops and feels less hacky.
llvm-svn: 335804
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335794
The code to emit the pieces of the MSF file were actually in
PDBFileBuilder. Move this to MSFBuilder so that we can
theoretically emit an MSF without having a PDB file.
llvm-svn: 335789
If we turn X86ISD::AND into ISD::AND, we delete N. But we were continuing onto the next block of code even though N no longer existed.
Just happened to notice it. I assume asan didn't notice it because we explicitly unpoison deleted nodes and give them a DELETE_NODE opcode.
llvm-svn: 335787
Summary:
In r333455 we added a peephole to fix the corner cases that result
from separating base + offset lowering of global address.The
peephole didn't handle some of the cases because it only has a basic
block view instead of a function level view.
This patch replaces that logic with a machine function pass. In
addition to handling the original cases it handles uses of the global
address across blocks in function and folding an offset from LW\SW
instruction. This pass won't run for OptNone compilation, so there
will be a negative impact overall vs the old approach at O0.
Reviewers: asb, apazos, mgrang
Reviewed By: asb
Subscribers: MartinMosbeck, brucehoult, the_o, rogfer01, mgorny, rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, llvm-commits, edward-jones
Differential Revision: https://reviews.llvm.org/D47857
llvm-svn: 335786
The %eiz/%riz are dummy registers that force the encoder to emit a SIB byte when it normally wouldn't. By emitting them in the disassembly output we ensure that assembling the disassembler output would also produce a SIB byte.
This should match the behavior of objdump from binutils.
llvm-svn: 335768
Now that we have the ability to legalize based on MMO's. Add support for
legalizing based on AtomicOrdering and use it to correct the legalization
of the atomic instructions.
Also extend all() to be a variadic template as this ruleset now requires
3 and 4 argument versions.
llvm-svn: 335767
As noted in the D44909 review, the transform from (fptosi+sitofp) to ftrunc
can produce -0.0 where the original code does not:
#include <stdio.h>
int main(int argc) {
float x;
x = -0.8 * argc;
printf("%f\n", (float)((int)x));
return 0;
}
$ clang -O0 -mavx fp.c ; ./a.out
0.000000
$ clang -O1 -mavx fp.c ; ./a.out
-0.000000
Ideally, we'd use IR/node flags to predicate the transform, but the IR parser
doesn't currently allow fast-math-flags on the cast instructions. So for now,
just use the function attribute that corresponds to clang's "-fno-signed-zeros"
option.
Differential Revision: https://reviews.llvm.org/D48085
llvm-svn: 335761
Summary:
Rather than just print the GUID, when it is available in the index,
print the global name as well in the function import thin link debug
messages. Names will be available when the combined index is being
built by the same process, e.g. a linker or "llvm-lto2 run".
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48612
llvm-svn: 335760
It isn't safe to outline sequences of instructions where x16/x17/nzcv live
across the sequence.
This teaches the outliner to check whether or not a specific canidate has
x16/x17/nzcv live across it and discard the candidate in the case that that is
true.
https://bugs.llvm.org/show_bug.cgi?id=37573https://reviews.llvm.org/D47655
llvm-svn: 335758
If we are just modifying a single bit at a variable bit position we can use the BT* instructions to make the change instead of shifting a 1(or rotating a -1) and doing a binop. These instruction also ignore the upper bits of their index input so we can also remove an and if one is present on the index.
Fixes PR37938.
llvm-svn: 335754
Summary:
AliasSet::print uses `I->printAsOperand` to print UnknownInstructions. The problem is that not all UnknownInstructions have names (e.g. call instructions). When such instructions are printed, they appear as `<badref>` in AliasSets, which is very confusing, as the values are perfectly valid.
This patch fixes that by printing UnknownInstructions without a name using `print` instead of `printAsOperand`.
Reviewers: asbirlea, chandlerc, sanjoy, grosser
Reviewed By: asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48609
llvm-svn: 335751
I think the intrinsics named 'avx512.mask.' should refer to the previous behavior of taking a mask argument in the intrinsic instead of using a 'select' or 'and' instruction in IR to accomplish the masking. This is more consistent with the goal that eventually we will have no intrinsics that have masking builtin. When we reach that goal, we should have no intrinsics named "avx512.mask".
llvm-svn: 335744
If a source of rcp instruction is a result of any conversion from
an integer convert it into rcp_iflag instruction. No FP exception
can ever happen except division by zero if a single precision rcp
argument is a representation of an integral number.
Differential Revision: https://reviews.llvm.org/D48569
llvm-svn: 335742
This patch adds a custom trunc store lowering for v4i8 vector types.
Since there is not v.4b register, the v4i8 is promoted to v4i16 (v.4h)
and default action for v4i8 is to extract each element and issue 4
byte stores.
A better strategy would be to extended the promoted v4i16 to v8i16
(with undef elements) and extract and store the word lane which
represents the v4i8 subvectores. The construction:
define void @foo(<4 x i16> %x, i8* nocapture %p) {
%0 = trunc <4 x i16> %x to <4 x i8>
%1 = bitcast i8* %p to <4 x i8>*
store <4 x i8> %0, <4 x i8>* %1, align 4, !tbaa !2
ret void
}
Can be optimized from:
umov w8, v0.h[3]
umov w9, v0.h[2]
umov w10, v0.h[1]
umov w11, v0.h[0]
strb w8, [x0, #3]
strb w9, [x0, #2]
strb w10, [x0, #1]
strb w11, [x0]
ret
To:
xtn v0.8b, v0.8h
str s0, [x0]
ret
The patch also adjust the memory cost for autovectorization, so the C
code:
void foo (const int *src, int width, unsigned char *dst)
{
for (int i = 0; i < width; i++)
*dst++ = *src++;
}
can be vectorized to:
.LBB0_4: // %vector.body
// =>This Inner Loop Header: Depth=1
ldr q0, [x0], #16
subs x12, x12, #4 // =4
xtn v0.4h, v0.4s
xtn v0.8b, v0.8h
st1 { v0.s }[0], [x2], #4
b.ne .LBB0_4
Instead of byte operations.
llvm-svn: 335735
This patch adds support for the q versions of the dup
(load-to-all-lanes) NEON intrinsics, such as vld2q_dup_f16() for
example.
Currently, non-q versions of the dup intrinsics are implemented
in clang by generating IR that first loads the elements of the
structure into the first lane with the lane (to-single-lane)
intrinsics, and then propagating it other lanes. There are at
least two problems with this approach. First, there are no
double-spaced to-single-lane byte-element instructions. For
example, there is no such instruction as 'vld2.8 { d0[0], d2[0]
}, [r0]'. That means we cannot rely on the to-single-lane
intrinsics and instructions to implement the q versions of the
dup intrinsics. Note that to-all-lanes instructions do support
all sizes of data items, including bytes.
The second problem with the current approach is that we need a
separate vdup instruction to propagate the structure to each
lane. So for vld4q_dup_f16() we would need four vdup instructions
in addition to the initial vld instruction.
This patch introduces dup LLVM intrinsics and reworks handling of
the currently supported (non-q) NEON dup intrinsics to expand
them into those LLVM intrinsics, thus eliminating the need for
using to-single-lane intrinsics and instructions.
Additionally, this patch adds support for u64 and s64 dup NEON
intrinsics. These are marked as Arch64-only in the ARM NEON
Reference, but it seems there are no reasons to not support them
in AArch32 mode. Please correct, if that is wrong.
That's what we generate with this patch applied:
vld2q_dup_f16:
vld2.16 {d0[], d2[]}, [r0]
vld2.16 {d1[], d3[]}, [r0]
vld3q_dup_f16:
vld3.16 {d0[], d2[], d4[]}, [r0]
vld3.16 {d1[], d3[], d5[]}, [r0]
vld4q_dup_f16:
vld4.16 {d0[], d2[], d4[], d6[]}, [r0]
vld4.16 {d1[], d3[], d5[], d7[]}, [r0]
Differential Revision: https://reviews.llvm.org/D48439
llvm-svn: 335733
This prevents InstCombine from creating mis-sized dbg.values when
replacing a sequence of casts with a simpler cast. For example, in:
(fptrunc (floor (fpext X))) -> (floorf X)
We no longer emit dbg.value(X) (with a 32-bit float operand) to describe
(fpext X) (which is a 64-bit float).
This was diagnosed by the debugify check added in r335682.
llvm-svn: 335696
Nothing was using this relationship. By splitting them we no longer need to worry about register or memory entries being empty in a group.
The memory folding tables in X86InstrInfo.cpp can be used to access this relationship if needed.
llvm-svn: 335694
Summary:
When recording uses we need to rewrite after cloning a loop we need to
check if the use is not dominated by the original def. The initial
assumption was that the cloned basic block will introduce a new path and
thus the original def will only dominate the use if they are in the same
BB, but as the reproducer from PR37745 shows it's not always the case.
This fixes PR37745.
Reviewers: haicheng, Ka-Ka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48111
llvm-svn: 335675
LLJIT is a prefabricated ORC based JIT class that is meant to be the go-to
replacement for MCJIT. Unlike OrcMCJITReplacement (which will continue to be
supported) it is not API or bug-for-bug compatible, but targets the same
use cases: Simple, non-lazy compilation and execution of LLVM IR.
LLLazyJIT extends LLJIT with support for function-at-a-time lazy compilation,
similar to what was provided by LLVM's original (now long deprecated) JIT APIs.
This commit also contains some simple utility classes (CtorDtorRunner2,
LocalCXXRuntimeOverrides2, JITTargetMachineBuilder) to support LLJIT and
LLLazyJIT.
Both of these classes are works in progress. Feedback from JIT clients is very
welcome!
llvm-svn: 335670
This addresses post-commit feedback about the name 'skipDebugInfo' being
misleading. This name could be interpreted as meaning 'a function that
skips instructions with debug locations'.
The new name, 'skipDebugIntrinsics', makes it clear that this function
only skips debug info intrinsics.
Thanks to Adrian Prantl for pointing this out!
llvm-svn: 335667
AsynchronousSymbolQuery::canStillFail checks the value of the callback to
prevent sending it redundant error notifications, so we need to reset it after
running it.
llvm-svn: 335664
Right now, when we use RIP-relative instructions in 32-bit mode, we'll just
assert and crash.
This adds an error message which tells the user that they can't do that in
32-bit mode, so that we don't crash (and also can see the issue outside of
assert builds).
llvm-svn: 335658
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
Not sure why this logic seems to be repeated in 2 different places,
one called by the other.
On AMDGPU addrspace(3) globals start allocating at 0, so these
checks will be incorrect (not that real code actually tries
to compare these addresses)
llvm-svn: 335649
Summary: This is trying to add support for r334428.
Reviewers: sanjoy
Subscribers: jlebar, hiraditya, bixia, llvm-commits
Differential Revision: https://reviews.llvm.org/D48399
llvm-svn: 335646
I'm not sure why the code here is skipping calls since
TTI does try to do something for general calls, but it
at least should allow intrinsics.
Skip intrinsics that should not be omitted as calls, which
is by far the most common case on AMDGPU.
llvm-svn: 335645
salvageDebugInfo() performs a check that allows it to exit early without
doing a DenseMap lookup. It's a bit neater and marginally more useful to
sink this early exit into the findDbg{Addr,Users,Values} helpers.
llvm-svn: 335642
Add the generic processor for Hexagon so that it can be used
with 3rd party programs that create a back-end with the
"generic" CPU. This patch also enables the JIT for Hexagon.
Differential Revision: https://reviews.llvm.org/D48571
llvm-svn: 335641
Similar to other patches in this series:
https://reviews.llvm.org/rL335512https://reviews.llvm.org/rL335527https://reviews.llvm.org/rL335597https://reviews.llvm.org/rL335616
...this is filling a gap in analysis that is exposed by an unrelated select-of-constants transform.
I didn't see a way to unify the sext cases because each div/rem opcode results in a different fold.
Note that in this case, the backend might want to convert the select into math:
Name: sext urem
%e = sext i1 %x to i32
%r = urem i32 %y, %e
=>
%c = icmp eq i32 %y, -1
%z = zext i1 %c to i32
%r = add i32 %z, %y
llvm-svn: 335622
Since D46637 we are better at handling uniform/non-uniform constant Pow2 detection; this patch tweaks the SLP argument handling to support them.
As SLP works with arrays of values I don't think we can easily use the pattern match helpers here.
Differential Revision: https://reviews.llvm.org/D48214
llvm-svn: 335621
It is legal for a PHI node not to have a live value in a predecessor
as long as the end of the predecessor is jointly dominated by an undef
value.
llvm-svn: 335607
Summary:
If a routine with no stack frame makes a sibling call, we need to
preserve the stack space check even if the local stack frame is empty,
since the call target could be a "no-split" function (in which case
the linker needs to be able to fix up the prolog sequence in order to
switch to a larger stack).
This fixes PR37807.
Reviewers: cherry, javed.absar
Subscribers: srhines, llvm-commits
Differential Revision: https://reviews.llvm.org/D48444
llvm-svn: 335604
Summary:
Adds assembly parsing support for the module summary index (follow on
to r333335 which added the assembly writing support).
I added support to llvm-as to invoke the index parsing, so that it can
create either a bitcode file with a Module and a per-module index, or
a combined index without a Module.
I will send follow on patches soon to do the following:
- add support to tools such as llvm-lto2 to parse the per-module indexes
from assembly instead of bitcode when testing the thin link.
- verification support.
Depends on D47844 and D47842.
Reviewers: pcc, dexonsmith, mehdi_amini
Subscribers: inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47905
llvm-svn: 335602
Note: I didn't add a hasOneUse() check because the existing,
related fold doesn't have that check. I suspect that the
improved analysis and codegen make these some of the rare
canonicalization cases where we allow an increase in
instructions.
llvm-svn: 335597
When the condition code for an IT instruction is "AL" we get strange "15"
predicates on subsequent instructions. These are dealt with for most
instructions by treating them as "ARMCC::AL", but VFP takes a different path
which didn't have this code.
llvm-svn: 335594
IT instructions are allowed to have the 'AL' predicate, but it must never
result in an 'NV' predicated instruction. Essentially this means that all
branches must be 't' rather than 'e' if the predicate is 'AL'.
This patch adds a diagnostic for this during assembly (error because parsing
hits an assertion if allowed to continue) and an annotation during disassembly.
llvm-svn: 335593
changeToUnreachable may remove PHI nodes from executable blocks we found values
for and we would fail to replace them. By changing dead blocks to unreachable after
we replaced constants in all executable blocks, we ensure such PHI nodes are replaced
by their known value before.
Fixes PR37780.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D48421
llvm-svn: 335588
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
Turn canonicalized subtraction back into (-1 - B) and combine it with (A + 1) into (A - B).
This is similar to the folding already done for (B ^ -1) + Const into (-1 + Const) - B.
Differential Revision: https://reviews.llvm.org/D48535
llvm-svn: 335579
These opcodes have a fixed type of i8 for their immediate and shouldn't have anything to do with the scalar shift amount used by target independent shift nodes.
llvm-svn: 335578
CallLoweringInfo's NumFixedArgs field gives the number of fixed arguments
before legalization. The ISD::OutputArg "Outs" array holds legalized
arguments, so when indexing into it to find the non-fixed arguemn, we need
to use the number of arguments after legalization.
Fixes PR37934.
llvm-svn: 335576
Summary:
Same idea as D48529, but restricted to X86 and done very late to avoid any surprises where subtract might be better for DAG combining.
This seems like the safest way to do this trick. And we consider doing it as a DAG combine later.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48557
llvm-svn: 335575
Summary:
Adds a string saver to the ModuleSummaryIndex so it can store value
names in the case of adding a ValueInfo for a GUID when we don't
have the name stored in a Module string table. This is motivated
by the upcoming summary parser patch, where we will read value names
from the summary entry and want to store them, even when a Module
is not available.
Currently this allows us to store the name in the legacy bitcode case,
and I have added a test to show that.
Reviewers: pcc, dexonsmith
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47842
llvm-svn: 335570
This recommits r335562 and 335563 as a single commit.
The frontend will surround the intrinsic with the appropriate marshalling to/from a scalar type to match the sigature of the builtin that software expects.
By exposing the vXi1 type directly in the llvm intrinsic we make it available to optimizers much earlier. This can enable the scalar marshalling code to be optimized away.
llvm-svn: 335568
Summary:
Without this change we only add module paths to the combined index when
there is a module hash or at least one global value. Make this more
consistent by adding the module to the index whenever there is a summary
section, and it is a per-module summary (had a MODULE_CODE_SOURCE_FILENAME
record).
Since we will no longer add module paths lazily, add a new interface to get
the module info from the index that asserts it is already added.
Fixes PR37899.
Reviewers: Vlad, pcc
Subscribers: mehdi_amini, inglorion, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48511
llvm-svn: 335567
Summary:
I discovered when writing the summary parsing support that the
per-module index builder and writer are computing the GUID from the
value name alone (ignoring the linkage type). This was ok since those
GUID were not emitted in the bitcode, and there are never multiple
conflicting names in a single module.
However, I don't see a reason for making the GUID computation different
for the per-module case. It also makes things simpler on the parsing
side to have the GUID computation consistent. So this patch changes the
summary analysis phase and the per-module summary writer to compute the
GUID using the facility on the GlobalValue.
Reviewers: pcc, dexonsmith
Subscribers: llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D47844
llvm-svn: 335560
unswitching of switches.
This works much like trivial unswitching of switches in that it reliably
moves the switch out of the loop. Here we potentially clone the entire
loop into each successor of the switch and re-point the cases at these
clones.
Due to the complexity of actually doing nontrivial unswitching, this
patch doesn't create a dedicated routine for handling switches -- it
would duplicate far too much code. Instead, it generalizes the existing
routine to handle both branches and switches as it largely reduces to
looping in a few places instead of doing something once. This actually
improves the results in some cases with branches due to being much more
careful about how dead regions of code are managed. With branches,
because exactly one clone is created and there are exactly two edges
considered, somewhat sloppy handling of the dead regions of code was
sufficient in most cases. But with switches, there are much more
complicated patterns of dead code and so I've had to move to a more
robust model generally. We still do as much pruning of the dead code
early as possible because that allows us to avoid even cloning the code.
This also surfaced another problem with nontrivial unswitching before
which is that we weren't as precise in reconstructing loops as we could
have been. This seems to have been mostly harmless, but resulted in
pointless LCSSA PHI nodes and other unnecessary cruft. With switches, we
have to get this *right*, and everything benefits from it.
While the testing may seem a bit light here because we only have two
real cases with actual switches, they do a surprisingly good job of
exercising numerous edge cases. Also, because we share the logic with
branches, most of the changes in this patch are reasonably well covered
by existing tests.
The new unswitch now has all of the same fundamental power as the old
one with the exception of the single unsound case of *partial* switch
unswitching -- that really is just loop specialization and not
unswitching at all. It doesn't fit into the canonicalization model in
any way. We can add a loop specialization pass that runs late based on
profile data if important test cases ever come up here.
Differential Revision: https://reviews.llvm.org/D47683
llvm-svn: 335553
This removes a "UDivFoldAction" in favor of a simple constant
matcher. In theory, the existing code could do more matching,
but I don't see any evidence or need for it. I've left a TODO
about using ValueTracking in case we see any regressions.
llvm-svn: 335545
std::lower_bound doesn't require the thing to search for to be the same type as the table entries. We just need to define an appropriate comparison function that can take an table entry and an intrinsic number.
llvm-svn: 335518
This avoids creating unnecessary casts if the IP used to be a dbg info
intrinsic. Fixes PR37727.
Reviewers: vsk, aprantl, sanjoy, efriedma
Reviewed By: vsk, efriedma
Differential Revision: https://reviews.llvm.org/D47874
llvm-svn: 335513
Summary:
The NetBSD Operating System installs debuginfo
files into /usr/libdata/debug, rather than other path
like in some other popular distribution.
This change makes llvm-symbolizer functional with
the basesystem executables.
Reviewers: joerg, vitalybuka
Reviewed By: vitalybuka
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48525
llvm-svn: 335511
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
I restricted the MCJIT/eh-lg-pic.ll test to Linux, since the large PIC
code model is not implemented for MachO yet.
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335508
With the static tables sorted we can binary search them directly for reg->mem lookups. This removes 6 DenseMaps that had to be created when X86InstrInfo is constructed.
We still have one Mem->Reg DenseMap for the reverse direction. This is created just as before by walking the reg->mem arrays to populate it.
Differential Revision: https://reviews.llvm.org/D48527
llvm-svn: 335501
This removes debug locations from ConstantSDNode and ConstantSDFPNode.
When this kind of node is materialized we no longer create a line table
entry which jumps back to the constant's first point of use. This makes
single-stepping behavior smoother, and it matches the model used by IR,
where Constants have no locations. See this thread for more context:
http://lists.llvm.org/pipermail/llvm-dev/2018-June/124164.html
I'd like to handle constant BuildVectorSDNodes and to try to eliminate
passing SDLocs to SelectionDAG::getConstant*() in follow-up commits.
Differential Revision: https://reviews.llvm.org/D48468
llvm-svn: 335497
There are quite a few if statements that enumerate all these cases. It gets
even worse in our fork of LLVM where we also have a Triple::cheri (which
is mips64 + CHERI instructions) and we had to update all if statements that
check for Triple::mips64 to also handle Triple::cheri. This patch helps to
reduce our diff to upstream and should also make some checks more readable.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D48548
llvm-svn: 335493
Note a normal select test is not currently possible because this
relies on input registers tracked in SIMachineFunctionInfo which
are not currently serializable in MIR, but this does work end-to-end
from the IR.
llvm-svn: 335490
I thought I fixed this in r308673, but that fix was
very broken. The assumption that any frame index can be used
in place of another was more widespread than I realized.
Even when stack slot sharing was disabled, this was still
replacing frame index uses with a different ID with a different
stack slot.
Really fix this by doing the coloring per-stack ID, so all of
the coloring logically done in a separate namespace. This is a lot
simpler than trying to figure out how to change the color if
the stack ID is different.
llvm-svn: 335488
If a function has sample to use, but cannot use them because of no debug
information, currently a warning will be issued to inform the missing
opportunity.
This warning assumes the binary generating the profile and the binary using
the profile are similar enough. It is not always the case. Sometimes even
if the binaries are not quite similar, we may still get some benefit by
using sampleFDO. In those cases, we may still want to apply sampleFDO but
not want to see a lot of such warnings pop up.
The patch adds an option for the warning.
Differential Revision: https://reviews.llvm.org/D48510
llvm-svn: 335484
We can prove that some delinearized subscripts do not wrap around to become
negative by the fact that they are from inbound geps of load/store locations.
This helps improve the delinearisation in cases where we can't prove that they
are non-negative from SCEV alone.
Differential Revision: https://reviews.llvm.org/D48481
llvm-svn: 335481
This should avoid relying on the pointee type
to get the alignment, particularly since pointee
types are supposed to be removed at some point.
Also fixes not getting the alignment for unsized types.
llvm-svn: 335478
Not only should SafepointIRVerifier ignore unreachable blocks (as suggested in https://reviews.llvm.org/D47011) but it also has to ignore dead blocks.
In @test2 (see the new tests):
br i1 true, label %right, label %left
left:
...
right:
...
merge:
%val = phi i8 addrspace(1)* [ ..., %left ], [ ..., %right ]
use %val
both left and right branches are reachable.
If they collide then SafepointIRVerifier reports an error.
Because of the foldable branch condition GVN finds the left branch dead and removes the phi node entry that merges values from right and left. Then the use comes from the right branch. This results in no collision.
So, SafepointIRVerifier ends up in different results depending on either GVN is run or not.
To solve this issue this patch adds Dead Block detection to SafepointIRVerifier which can ignore dead blocks while validating IR. The Dead Block detection algorithm is taken from GVN but modified to not split critical edges. That is needed to keep CFG unchanged by SafepointIRVerifier.
Patch by Yevgeny Rouban.
Reviewed By: anna, apilipenko, DaniilSuchkov
Differential Revision: https://reviews.llvm.org/D47441
llvm-svn: 335473
We should be blocking the operand while we are in the routine that tries to find commutable operand indices. Doing it later means we might have missed out on another valid set of operands we could have commuted.
The intrinsic case was the only case that could really prevent commuting in getFMA3OpcodeToCommuteOperands. All the other cases in getThreeSrcCommuteCase were not reachable conditions as they were protected by findThreeSrcCommutedOpIndices.
With that abort case pushed earlier, we can remove all the abort checks and replace with asserts.
llvm-svn: 335446
It's easy for domination numbers to get out-of-date, and this is no more
costly than any of the other verifiers we already have, so it seems nice
to have.
A stage3 build with this Works On My Machine, so this hasn't caught any
bugs... yet. :)
llvm-svn: 335444
Summary:
A WebAssemblyException object contains BBs that belong to a 'catch' part
of the try-catch-end structure. Because CFGSort requires all the BBs
within a catch part to be sorted together as it does for loops, this
pass calculates the nesting structure of catch part of exceptions in a
function. Now this assumes the use of Windows EH instructions.
Reviewers: dschuff, majnemer
Subscribers: jfb, mgorny, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44134
llvm-svn: 335439
Summary:
Add WebAssemblyLateEHPrepare pass that does several small jobs for
exception handling. This runs before CFGSort, and is different from
WasmEHPrepare pass that runs before ISel, even though the names are
similar.
Reviewers: dschuff, majnemer
Subscribers: sbc100, jgravelle-google, sunfish, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46803
llvm-svn: 335438
They appear to be untested other than the test case for p37879.ll and I believe we should be using SimplifyDemandedElts here to handle these cases.
llvm-svn: 335436
This patch has the same motivating example as D48466:
define void @foo(i64 %x, i32 %c.0282.in, i32 %d.0280, i32* %ptr0, i32* %ptr1) {
%c.0282 = and i32 %c.0282.in, 268435455
%a16 = lshr i64 32508, %x
%a17 = and i64 %a16, 1
%tobool = icmp eq i64 %a17, 0
%. = select i1 %tobool, i32 1, i32 2
%.286 = select i1 %tobool, i32 27, i32 26
%shr97 = lshr i32 %c.0282, %.
%shl98 = shl i32 %c.0282.in, %.286
%or99 = or i32 %shr97, %shl98
%shr100 = lshr i32 %d.0280, %.
%shl101 = shl i32 %d.0280, %.286
%or102 = or i32 %shr100, %shl101
store i32 %or99, i32* %ptr0
store i32 %or102, i32* %ptr1
ret void
}
...but I'm trying to kill the setcc bool math sooner rather than later.
By matching a larger pattern that includes both the low-bit mask and the trailing add/sub,
we can create a universally good fold because we always eliminate the condition code
intermediate value.
Here are Alive proofs for these (currently instcombine folds the 'add' variants, but
misses the 'sub' patterns):
https://rise4fun.com/Alive/Gsyp
Name: sub of zext cmp mask
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%z = zext i1 %c to i32
%r = sub i32 C1, %z
=>
%optional_cast = zext i8 %a to i32
%r = add i32 %optional_cast, C1-1
Name: add of zext cmp mask
%a = and i32 %x, 1
%c = icmp eq i32 %a, 0
%z = zext i1 %c to i8
%r = add i8 %z, C1
=>
%optional_cast = trunc i32 %a to i8
%r = sub i8 C1+1, %optional_cast
All of the tests look like improvements or neutral to me. But it is possible that x86
test+set+bitop is better than what we now show here. I suspect we could do better by
adding another fold for the 'sub' variants.
We start with select-of-constant in IR in the larger motivating test, so that's why I
included tests with selects. Proofs for those variants:
https://rise4fun.com/Alive/Bx1
Name: true const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C2, i64 C1
=>
%z = zext i8 %a to i64
%r = sub i64 C2, %z
Name: false const is bigger
Pre: C2 == (C1 + 1)
%a = and i8 %x, 1
%c = icmp eq i8 %a, 0
%r = select i1 %c, i64 C1, i64 C2
=>
%z = zext i8 %a to i64
%r = add i64 C1, %z
Differential Revision: https://reviews.llvm.org/D48466
llvm-svn: 335433
For some reason the 64-bit patterns were separated from their 8/16/32-bit friends, but only for add/sub/mul. For and/or/xor they were together.
llvm-svn: 335429
-Ensure EIP isn't used with an index reigster.
-Ensure EIP isn't used as index register.
-Ensure base register isn't a vector register.
-Ensure eiz/riz usage matches the size of their base register.
llvm-svn: 335412
FDiv is replaced with multiplication by reciprocal and invariant
reciprocal is hoisted out of the loop, while multiplication remains
even if invariant.
Switch checks for all invariant operands and only invariant
denominator to fix the issue.
Differential Revision: https://reviews.llvm.org/D48447
llvm-svn: 335411
Implements PR34259
Intrinsics.h is a very popular header. Most LLVM TUs care about things
like dbg_value, but they don't care how they are implemented. After I
split these out, IntrinsicImpl.inc is 1.7 MB, so this saves each LLVM TU
from scanning 1.7 MB of source that gets pre-processed away.
It also means we can modify intrinsic properties without triggering a
full rebuild, but that's probably less of a win.
I think the next best thing to do would be to split out the target
intrinsics into their own header. Very, very few TUs care about
target-specific intrinsics. It's very hard to split up the target
independent intrinsics like llvm.expect, assume, and dbg.value, though.
llvm-svn: 335407
Previously, to support (%dx) we left a wide open hole in our 16-bit memory address checking. This let this address value be used with any instruction without error in the parser. It would later fail in the encoder with an assertion failure on debug builds and who knows what on release builds.
This patch passes the mnemonic down to the memory operand parsing function so we can allow the (%dx) form only on specific instructions.
llvm-svn: 335403
This gets rid of a bunch of weird special cases; instead, just use SCEV
rewriting for everything. In addition to being simpler, this fixes a
bug where we would use the wrong stride in certain edge cases.
The one bit I'm not quite sure about is the trip count handling,
specifically the FIXME about overflow. In general, I think we need to
widen the exit condition, but that's probably not profitable if the new
type isn't legal, so we probably need a check somewhere. That said, I
don't think I'm making the existing problem any worse.
As a followup to this, a bunch of IV-related code in root-finding could
be cleaned up; with SCEV-based rewriting, there isn't any reason to
assume a loop will have exactly one or two PHI nodes.
Differential Revision: https://reviews.llvm.org/D45191
llvm-svn: 335400
This allows us to check these:
-16-bit addressing doesn't support scale so we should error if we find one there.
-Multiplying ESP/RSP by a scale even if the scale is 1 should be an error because ESP/RSP can't be an index.
llvm-svn: 335398
By default, the second register gets assigned to the index register slot. But ESP can't be an index register so we need to swap it with the other register.
There's still a slight bug that we allow [EAX+ESP*1]. The existence of the multiply even though its with 1 should force ESP to the index register and trigger an error, but it doesn't currently.
llvm-svn: 335394
Since we are now producing a summary also for regular LTO builds, we
need to run the NameAnonGlobals pass in those cases as well (the
summary cannot handle anonymous globals).
See https://reviews.llvm.org/D34156 for details on the original change.
This reverts commit 6c9ee4a4a438a8059aacc809b2dd57128fccd6b3.
llvm-svn: 335385
The second register is the index register and should only be %si or %di if used with a base register. And in that case the base register should be %bp or %bx.
This makes us compatible with gas.
We do still need to support both orders with Intel syntax which uses [bp+si] and [si+bp]
llvm-svn: 335384
(%bp) can't be encoded without a displacement. The encoding is instead used for displacement alone. So a 1 byte displacement of 0 must be used. But if there is an index register we can encode without a displacement.
llvm-svn: 335379
Summary:
In LoopUnswitch when replacing a branch Parent -> Succ with a conditional
branch Parent -> True & Parent->False, the DomTree updates should insert an edge for
each of True/False if True/False are different than Succ, and delete Parent->Succ edge
if both are different. The comparison with Succ appears to be incorect,
it's comparing with Parent instead.
There is no test failing either before or after this change, but it seems to me this is
the right way to do the update.
Reviewers: chandlerc, kuhar
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D48457
llvm-svn: 335369
Enable tryToVectorizeList to support InstructionsState alternate opcode patterns at a root (build vector etc.) as well as further down the vectorization tree.
NOTE: This patch reduces some of the debug reporting if there are opcode mismatches - I can try to add it back if it proves a problem. But it could get rather messy trying to provide equivalent verbose debug strings via getSameOpcode etc.
Differential Revision: https://reviews.llvm.org/D48488
llvm-svn: 335364
DWARF v5 explicitly represents file #0 in the line table. Prior
versions did not, so ".loc 0" is still an error in those cases.
Differential Revision: https://reviews.llvm.org/D48452
llvm-svn: 335350
SLP currently only accepts (F)Add/(F)Sub alternate counterpart ops to be merged into an alternate shuffle.
This patch relaxes this to accept any pair of BinaryOperator opcodes instead, assuming the target's cost model accepts the vectorization+shuffle.
Differential Revision: https://reviews.llvm.org/D48477
llvm-svn: 335349
With compilation fix.
Original commit message:
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335336
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335332
AArch64 was only setting costs for SK_Transpose, which meant that many of the simpler shuffles (e.g. SK_Select and SK_PermuteSingleSrc for larger vector elements) was being severely overestimated by the default shuffle expansion.
This patch adds costs to help improve SLP performance and avoid a regression in reductions introduced by D48174.
I'm not very knowledgeable about AArch64 shuffle lowering so I've kept the extra costs to a minimum - someone who knows this code can add extra costs which should improve vectorization a lot more.
Differential Revision: https://reviews.llvm.org/D48172
llvm-svn: 335329
This sets target feature FeatureStrictAlign for Armv6-m and Armv8-m.baseline,
because it has no support for unaligned accesses.
It looks like we always pass target feature "+strict-align" from
Clang, so this is not a user facing problem, but querying the subtarget
(in e.g. llc) for unaligned access support is incorrect.
Differential Revision: https://reviews.llvm.org/D48437
llvm-svn: 335326
Not sure why the 32/64 split is needed in the atomic_load
store hierarchies. The regular PatFrags do this, but we don't
do it for the existing handling for global.
llvm-svn: 335325
Changing the logic of scalar mask folding to check for valid input types rather
than against invalid ones, making it more robust and fixing PR37879.
Differential Revision: https://reviews.llvm.org/D48366
llvm-svn: 335323
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
llvm-svn: 335320
Summary:
We can select all instructions that are marked as legal in a full piglit run,
so now is a good time to make the TableGen'd instruction selector default
for all opcodes. This is NFC for a full piglit run, which is why there are
no tests.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, rovka, kristof.beyls, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48198
llvm-svn: 335319
clear out deleted loops from the current queue beyond just the current
loop.
This is important because SimpleLoopUnswitch will now enqueue the same
loop to be re-processed. When it does this with the legacy PM, we don't
have a way of canceling the rest of the pipeline and so we can end up
deleting the loop before we reprocess it. =/
This change also makes it easy to support deleting other loops in the
queue to process, although I don't have any use cases for that.
Differential Revision: https://reviews.llvm.org/D48470
llvm-svn: 335317
With non-commutative binops, we could be using the same
variable value as operand 0 in 1 binop and operand 1 in
the other, so we have to check for that possibility and
bail out.
llvm-svn: 335312
This patch adds support for generating a call graph profile from Branch Frequency Info.
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335306
Summary:
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
Reviewers: chandlerc, echristo
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335297
Summary:
A reprise of D25849.
This crash was found through fuzzing some time ago and was documented in PR28879.
No check for load size has been added due to the following tests:
- Transforms/GVN/invariant.group.ll
- Transforms/GVN/pr10820.ll
These tests expect load sizes that are not a multiple of eight.
Thanks to @davide for the original patch.
Reviewers: nlopes, davide, RKSimon, reames, efriedma
Reviewed By: efriedma
Subscribers: davide, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D48330
llvm-svn: 335294
Summary:
This initiates a discussion on changing Polly accordingly while re-applying r335197 (D48338).
I have never worked on Polly. The proposed change to param_div_div_div_2.ll is not educated, but just patterns that match the output.
All LLVM files are already reviewed in D48338.
Reviewers: jdoerfert, bollu, efriedma
Subscribers: jlebar, sanjoy, hiraditya, llvm-commits, bixia
Differential Revision: https://reviews.llvm.org/D48453
llvm-svn: 335292
Summary:
GCC and the binutils COFF linker do comdats differently from MSVC.
If we want to be ABI compatible, we have to do what they do, which is to
emit unique section names like ".text$_Z3foov" instead of short section
names like ".text". Otherwise, the binutils linker gets confused and
reports multiple definition errors when two object files from GCC and
Clang containing the same inline function are linked together.
The best description of the issue is probably at
https://github.com/Alexpux/MINGW-packages/issues/1677, we don't seem to
have a good one in our tracker.
I fixed up the .pdata and .xdata sections needed everywhere other than
32-bit x86. GCC doesn't use associative comdats for those, it appears to
rely on the section name.
Reviewers: smeenai, compnerd, mstorsjo, martell, mati865
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48402
llvm-svn: 335286
This is the simplest case from PR37806:
https://bugs.llvm.org/show_bug.cgi?id=37806
If we have a common variable operand used in a pair of binops with vector constants
that are vector selected together, then we can constant shuffle the constant vectors
to eliminate the shuffle instruction.
This has some tricky parts that are hopefully addressed in the tests and their
respective comments:
1. If the shuffle mask contains an undef element, then that lane of the result is
undef:
http://llvm.org/docs/LangRef.html#shufflevector-instruction
Therefore, we can replace the constant in that lane with an undef value except
for div/rem. With div/rem, an undef in the divisor would cause the whole op to
be undef. So I'm using the same hack as in D47686 - replace the undefs with '1'.
2. Intersect the wrapping and FMF of the original binops for the new binop. There
should be no extra poison or fast-math potential in the new binop that wasn't
possible in the original code.
3. Disregard other uses. Given that we're eliminating uses (shortening the
dependency chain), I think that's always the right IR canonicalization. But
I purposely chose the udiv test to demonstrate the scenario where both
intermediate values have other uses because that seems likely worse for
codegen with an expensive math op. This seems like a very rare possibility to
me, so I don't think it requires a backend patch first.
Differential Revision: https://reviews.llvm.org/D48401
llvm-svn: 335283
Update AMDGPU assembler syntax behind the code-object-v3 feature:
* Replace/rename most AMDGPU assembler directives/symbols and document them.
* Provide more diagnostics (e.g. values out of range, missing values, repeated
values).
* Provide path for backwards compatibility, even with underlying descriptor
changes.
Differential Revision: https://reviews.llvm.org/D47736
llvm-svn: 335281
This reverts commit r335206.
As discussed here: https://reviews.llvm.org/rL333740, a fix will come
tomorrow. In the meanwhile, revert this to fix some bots.
llvm-svn: 335272
BlockWaitcntProcessedSet was not being cleared between calls, so it was
producing incorrect counts in cases where MBB addresses happened to coincide
across multiple calls.
Differential Revision: https://reviews.llvm.org/D48391
llvm-svn: 335268
and everything that comes with it from implementation
and v3 header files.
Leave definition in v2 header files for backwards
compatibility.
Differential Revision: https://reviews.llvm.org/D48191
llvm-svn: 335267
Summary:
The logic for handling the sinking of COPY instructions was generating
different code when building with debug flags.
The original code did not take into consideration debug instructions. This
resulted in the registers in the DBG_VALUE instructions being treated as used,
and prevented the COPY from being sunk. This patch avoids analyzing debug
instructions when trying to sink COPY instructions.
This patch also creates a routine from the code in MachineSinking::SinkInstruction to
perform the logic of sinking an instruction along with its debug instructions.
This functionality is used in multiple places, including the code for sinking COPY instrs.
Reviewers: junbuml, javed.absar, MatzeB, bjope
Reviewed By: bjope
Subscribers: aprantl, probinson, thegameg, jonpa, bjope, vsk, kristof.beyls, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45637
llvm-svn: 335264
The previous code worked with vectors, but it failed when the
vector constants contained undef elements.
The matchers handle those cases.
llvm-svn: 335262
This is outwardly NFC from what I can tell, but it should be more efficient
to simplify first (despite the name, SimplifyAssociativeOrCommutative does
not actually simplify as InstSimplify does - it creates/morphs instructions).
This should make it easier to refactor duplicated code that runs for all binops.
llvm-svn: 335258
This reverts commit d8f57105010cc7e78026e511d5def873fc91e0e7.
Original Commit:
Author: Haicheng Wu <haicheng@codeaurora.org>
Date: Sun Feb 18 13:51:33 2018 +0000
[AArch64] Coalesce Copy Zero during instruction selection
Add special case for copy of zero to avoid a double copy.
Differential Revision: https://reviews.llvm.org/D36104
Author's intention is to remove a BB that has one mov instruction. In
order to do that, d8f571050 pessmizes MachineSinking by introducing a
copy, such that mov instruction is NOT moved to the BB. Optimization
downstream gets rid of the BB with only mov instruction. This works well
if we have only one fall through branch as there is only one "extra"
mov instruction.
If we have multiple fall throughs, we will have a lot of redundant movs.
In such a case, it's better to have this BB which has one mov instruction.
This is causing degradation in jpeg, fft and other codebases. I believe
if we want to remove a BB with only one branch instruction, we should not
pessimize Machine Sinking at all, and find some other solution.
llvm-svn: 335251
Allowed folding for "and/or" binops with non-constant operand if
arguments of select are 0/-1 values.
Normally this code with "and" opcode does not get to a DAG combiner
and simplified yet in the InstCombine. However AMDGPU produces it
during lowering and InstCombine has no chance to optimize it out.
In turn the same pattern with "or" opcode can reach DAG.
Differential Revision: https://reviews.llvm.org/D48301
llvm-svn: 335250
This option allows codegen (such as DAGCombine or MI scheduling) to use alias
analysis information, which can help with the codegen on in-order cpu's,
especially machine scheduling. Here I have done things the same way as AArch64,
adding a subtarget feature to enable this for specific cores, and enabled it for
the R52 where we have a schedule to make use of it.
Differential Revision: https://reviews.llvm.org/D48074
llvm-svn: 335249
Summary:
When expanding the PseudoTail in expandFunctionCall() we were using X6
to save the return address. Since this is a tail call the return
address is not needed, this patch replaces it with X0 to be ignored.
This matches the behaviour listed in the ISA V2.2 document page 110.
tail offset -----> jalr x0, x6, offset
GCC exhibits the same behavior.
Reviewers: apazos, asb, mgrang
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01
Differential Revision: https://reviews.llvm.org/D48343
llvm-svn: 335239
This should help in lowering the following four intrinsics:
_mm256_cvtepi32_epi8
_mm256_cvtepi64_epi16
_mm256_cvtepi64_epi8
_mm512_cvtepi64_epi8
Differential Revision: https://reviews.llvm.org/D46957
llvm-svn: 335238
Summary:
For sample and gather ops, we can accurately determine the set of
vaddr-size instruction variants that are required. This reduces
the size of instruction tables by ~5%.
The number of machine instruction opcodes is reduced from 10002
to 9476.
Change-Id: Ie7fc65d3657b762c7816017fe70b2e9bec644a8a
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D48168
llvm-svn: 335232
Summary:
This also removes the need for atomic pseudo instructions, since
we select the correct encoding directly in SITargetLowering::lowerImage
for dimension-aware image intrinsics.
Mesa uses dimension-aware image intrinsics since
commit a9a7993441.
Change-Id: I7473d20009476a4ed6d919cae4e6dca9ff42e77a
Reviewers: arsenm, rampitec, mareko, tpr, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48167
llvm-svn: 335231
Summary:
Use the expanded features of the TableGen generic tables to avoid manually
adding the combinatorially exploded set of intrinsics. The
getAMDGPUImageDimIntrinsic lookup function is early-out,
i.e. non-AMDGPU intrinsics will never look at the underlying table.
Use a generic approach for getting the new intrinsic overload to keep the
code simple, and make the image dmask handling more generic:
- handle non-sampler image loads
- handle the case where the set of demanded elements is not a prefix
There is some overlap between this code and an optimization that happens
in the backend during code generation. They currently complement each other:
- only the codegen optimization can generate vec3 loads
- only the InstCombine optimization can handle D16
The InstCombine optimization also likely covers more cases since the
codegen optimization is fairly ad-hoc. Ideally, we'll remove the optimization
in codegen once the infrastructure for vec3 is in place (which will probably
take a long time).
Modify the test cases to use dimension-aware intrinsics. This makes it
easier to see that the test coverage for the new intrinsics is equivalent,
and the old style intrinsics will be removed in a follow-up commit anyway.
Change-Id: I4b91ea661413d13004956fe4ef7d13d41b8ce3ad
Reviewers: arsenm, rampitec, majnemer
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48165
llvm-svn: 335230
Summary:
Having TableGen patterns for image intrinsics is hitting limitations:
for D16 we already have to manually pre-lower the packing of data
values, and we will have to do the same for A16 eventually.
Since there is already some custom C++ code anyway, it is arguably easier
to just do everything in C++, now that we can use the beefed-up generic
tables backend of TableGen to provide all the required metadata and map
intrinsics to corresponding opcodes. With this approach, all image
intrinsic lowering happens in SITargetLowering::lowerImage. That code is
dense due to all the cases that it handles, but it should still be easier
to follow than what we had before, by virtue of it all being done in a
single location, and by virtue of not relying on the TableGen pattern
magic that very few people really understand.
This means that we will have MachineSDNodes with MIMG instructions
during DAG combining, but that seems alright: previously we had
intrinsic nodes instead, but those are similarly opaque to the generic
CodeGen infrastructure, and the final pattern matching just did a 1:1
translation to machine instructions anyway. If anything, the fact that
we now merge the address words into a vector before DAG combine should
be an advantage.
Change-Id: I417f26bd88f54ce9781c1668acc01f3f99774de6
Reviewers: arsenm, rampitec, rtaylor, tstellar
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48017
llvm-svn: 335228
Summary:
This allows us to access rich information about MIMG opcodes from C++ code.
Simplifying the mapping between equivalent opcodes of different data size
becomes quite natural.
This also flattens the MIMG-related class and multiclass hierarchy a little,
and collapses together some of the scaffolding for sample and gather4 opcodes.
Change-Id: I1a2549fdc1e881ff100e5393d2d87e73729a0ccd
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48016
llvm-svn: 335227
Summary:
This will allows us to provide rich metadata about the instructions
in tables that are accessible by custom C++ code.
Change-Id: Id9305a26304ab6a6cceb6c65c8cd49141cc0101d
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48011
llvm-svn: 335224
Summary:
Kill instructions sometimes do use SCC in unusual circumstances, when
v_cmpx cannot be used due to the operands that are involved.
Additionally, even if SCC was never defined by the expansion, kill pseudos
could previously occur between an s_cmp and an s_cbranch_scc, which breaks
the SCC liveness tracking when the pseudo is expanded to split the basic
block. While it would be possible to explicitly mark the SCC as live-in for
the successor basic block, it's simpler to just mark the pseudo as using SCC,
so that such a sequence is never emitted by instruction selection in the
first place.
A similar issue affects indirect source/dest pseudos in principle, although
I haven't been able to come up with a test case where it actually matters
(this affects instruction selection, so a MIR test can't be used).
Fixes: dEQP-GLES3.functional.shaders.discard.dynamic_loop_always
Change-Id: Ica8d82ecff1a763b892a1112cf1b06c948863a4f
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47761
llvm-svn: 335223
Summary:
This allows us to reduce the number of different machine instruction
opcodes, which reduces the table sizes and helps flatten the TableGen
multiclass hierarchies.
We can do this because for each hardware MIMG opcode, we have a full set
of IMAGE_xxx_Vn_Vm machine instructions for all required sizes of vdata
and vaddr registers. Instead of having separate D16 machine instructions,
a packed D16 instructions loading e.g. 4 components can simply use the
same V2 opcode variant that non-D16 instructions use.
We still require a TSFlag for D16 buffer instructions, because the
D16-ness of buffer instructions is part of the opcode. Renaming the flag
should help avoid future confusion.
The one non-obvious code change is that for gather4 instructions, the
disassembler can no longer automatically decide whether to use a V2 or
a V4 variant. The existing logic which choose the correct variant for
other MIMG instruction is extended to cover gather4 as well.
As a bonus, some of the assembler error messages are now more helpful
(e.g., complaining about a wrong data size instead of a non-existing
instruction).
While we're at it, delete a whole bunch of dead legacy TableGen code.
Change-Id: I89b02c2841c06f95e662541433e597f5d4553978
Reviewers: arsenm, rampitec, kzhuravl, artem.tamazov, dp, rtaylor
Subscribers: wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47434
llvm-svn: 335222
Summary:
This also allows inner foreach loops to have a list that depends on
the iteration variable of an outer foreach loop. The test cases show
some very simple examples of how this can be used.
This was perhaps the last remaining major non-orthogonality in the
TableGen frontend.
Change-Id: I79b92d41a5c0e7c03cc8af4000c5e1bda5ef464d
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47431
llvm-svn: 335221
This enables da-delinearize in Dependence Analysis for delinearizing array
accesses into multiple dimensions. This can help to increase the power of
Dependence analysis on multi-dimensional arrays and prevent having to fall
back to the slower and less accurate MIV tests. It adds static checks on the
bounds of the arrays to ensure that one dimension doesn't overflow into
another, and brings our code in line with our tests.
Differential Revision: https://reviews.llvm.org/D45872
llvm-svn: 335217
These were being over cautious for costs for one/two op general shuffles - VSHUFPD doesn't have to replicate the same shuffle in both lanes like VSHUFPS does.
llvm-svn: 335216
Summary:
In some cases, these operands lacked the IsDebug property, which is meant to signal that
they should not affect codegen. This patch adds a check for this property in the
MachineVerifier and adds it where it was missing.
This includes refactorings to use MachineInstrBuilder construction functions instead of
manually setting up the intrinsic everywhere.
Patch by: JesperAntonsson
Reviewers: aprantl, rnk, echristo, javed.absar
Reviewed By: aprantl
Subscribers: qcolombet, sdardis, nemanjai, JDevlieghere, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D48319
llvm-svn: 335214
The alignment parameter to getExtLoad is treated as a base alignment,
not the alignment of the load (base + offset). When we infer a better
alignment for a Ptr we need to ensure that it applies to the base to
prevent the alignment on the load from being wrong.
This fixes a bug where the alignment could then be used to incorrectly
prove noalias between a load and a store, leading to a miscompile.
Differential Revision: https://reviews.llvm.org/D48029
llvm-svn: 335210
r335150 should resolve the issues with the clang-with-thin-lto-ubuntu
and clang-with-lto-ubuntu builders.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 335206
Summary:
Fixes PR36579.
For cases where we had e.g.
DBG_VALUE 42
[...]
DBG_VALUE undef
LiveDebugVariables would discard all undef DBG_VALUEs and then it would
look like the variable had the value 42 throughout the rest of the
function, which is incorrect.
With this patch we don't remove all undef DBG_VALUEs in LiveDebugVariables
so they will be kept after register allocation just like other DBG_VALUEs
which will yield more correct debug information.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: bjope, Ka-Ka, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48277
llvm-svn: 335205
conditions feeding a chain of `and`s or `or`s for a branch.
Much like with full non-trivial unswitching, we rely on the pass manager
to handle iterating until all of the profitable unswitches have been
done. This is to allow other more profitable unswitches to fire on any
of the cloned, simpler versions of the loop if viable.
Threading the partial unswiching through the non-trivial unswitching
logic motivated some minor refactorings. If those are too disruptive to
make it reasonable to review this patch, I can separate them out, but
it'll be somewhat timeconsuming so I wanted to send it for initial
review as-is. Feel free to tell me whether it warrants pulling apart.
I've tried to re-use (and factor out) logic form the partial trivial
unswitching, but not as much could be shared as I had haped. Still, this
wasn't as bad as I naively expected.
Some basic testing is added, but I probably need more. Suggestions for
things you'd like to see tested more than welcome. One thing I'd like to
do is add some testing that when we schedule this with loop-instsimplify
it effectively cleans up the cruft created.
Last but not least, this uncovered a bug that has been in loop cloning
the entire time for non-trivial unswitching. Specifically, we didn't
correctly add the outer-most cloned loop to the list of cloned loops.
This meant that LCSSA wouldn't be updated for it hypothetically, and
more significantly that we would never visit it in the loop pass
manager. I noticed this while checking loop-instsimplify by hand. I'll
try to separate this bugfix out into its own patch with a more focused
test. But it is just one line, so shouldn't significantly confuse the
review here.
After this patch, the only missing "feature" in this unswitch I'm aware
of us non-trivial unswitching of switches. I'll try implementing *full*
non-trivial unswitching of switches (which is at least a sound thing to
implement), but *partial* non-trivial unswitching of switches is
something I don't see any sound and principled way to implement. I also
have no interesting test cases for the latter, so I'm not really
worried. The rest of the things that need to be ported are bug-fixes and
more narrow / targeted support for specific issues.
Differential Revision: https://reviews.llvm.org/D47522
llvm-svn: 335203
Summary:
Since the value stored in the cache might be deleted or replaced with
something else, we need to use tracking ValueHandlers instead of plain
Value pointers. It was discovered in one of internal builds, and
unfortunately there is no small reproducer for the issue.
The cache was introduced in rL327328.
Reviewers: ahatanak, pete
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48407
llvm-svn: 335201
Summary:
Try to match udiv and urem patterns, and sink zext down to the leaves.
I'm not entirely sure why some unrelated tests change, but the added <nsw>s seem right.
Reviewers: sanjoy
Subscribers: jlebar, hiraditya, bixia, llvm-commits
Differential Revision: https://reviews.llvm.org/D48338
llvm-svn: 335197
Errors found processing the DW_AT_ranges attribute are propagated by lower level
routines and reported by their callers.
Reviewer: JDevlieghere
Differential Revision: https://reviews.llvm.org/D48344
llvm-svn: 335188
These are identical but use microMIPS instructions instead of MIPS instructions.
Also, flatten the 'let AdditionalPredicates = [InMicroMips]' by using the
ISA_MICROMIPS adjective. Add tests for constant materialization.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D48275
llvm-svn: 335185
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
llvm-svn: 335183
Summary: Make the MemorySSA verify also check that all Phi incoming blocks are block predecessors.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D48333
llvm-svn: 335174
I don't believe there is any real reason to have separate X86 specific opcodes for vector compares. Setcc has the same behavior just uses a different encoding for the condition code.
I had to change the CondCodeAction for SETLT and SETLE to prevent some transforms from changing SETGT lowering.
Differential Revision: https://reviews.llvm.org/D43608
llvm-svn: 335173
As described in D48359, this patch pushes InstructionsState down the BoUpSLP call hierarchy instead of the corresponding raw OpValue. This makes it easier to track the alternate opcode etc. and avoids us having to call getAltOpcode which makes it difficult to support more than one alternate opcode.
Differential Revision: https://reviews.llvm.org/D48382
llvm-svn: 335170
Previously this folding was done only if select is a first operand.
However, for non-commutative operations constant may go before
select.
Differential Revision: https://reviews.llvm.org/D48223
llvm-svn: 335167
The idea of partial unswitching is to take a *part* of a branch's
condition that is loop invariant and just unswitching that part. This
primarily makes sense with i1 conditions of branches as opposed to
switches. When dealing with i1 conditions, we can easily extract loop
invariant inputs to a a branch and unswitch them to test them entirely
outside the loop.
As part of this, we now create much more significant cruft in the loop
body, so this relies on adding cleanup passes to the loop pipeline and
revisiting unswitched loops to do that cleanup before continuing to
process them.
This already appears to be more powerful at unswitching than the old
loop unswitch pass, and so I'd appreciate pretty careful review in case
I'm just missing some correctness checks. The `LIV-loop-condition` test
case is not unswitched by the old unswitch pass, but is with this pass.
Thanks to Sanjoy and Fedor for the review!
Differential Revision: https://reviews.llvm.org/D46706
llvm-svn: 335156
These instructions were renamed in version 2.2 of the user-level ISA spec, but
the old name should also be accepted by standard tools.
llvm-svn: 335154
This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
llvm-svn: 335152
Using OrderedInstructions::dominates as comparator for instructions in
BBs without dominance relation can cause a non-deterministic order
between such instructions. That in turn can cause us to materialize
copies in a non-deterministic order. While this does not effect
correctness, it causes some minor non-determinism in the final generated
code, because values have slightly different labels.
Without this patch, running -print-predicateinfo on a reasonably large
module produces slightly different output on each run.
This patch uses the dominator trees DFSInNum to order instruction from
different BBs, which should enforce a deterministic ordering and
guarantee that dominated instructions come after the instructions that
dominate them.
Reviewers: dberlin, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D48230
llvm-svn: 335150
Summary:
Due to uniqueing of DICompositeTypes, it's possible for a type from one
module to be loaded into another earlier module without being renamed.
Then when the defining module is being IRMoved, the type can be used as
a Mapping destination before being loaded, such that when it's requested
using TypeMapTy::get() it will fail with an assertion that the type is a
source type when it's actually a type in both the source and
destination modules. Correctly handle that case by allowing a non-opaque
non-literal struct type be present in both modules.
Fix for PR37684.
Reviewers: pcc, tejohnson
Reviewed By: pcc, tejohnson
Subscribers: tobiasvk, mehdi_amini, steven_wu, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47898
llvm-svn: 335145
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
llvm-svn: 335144
Summary:
Found some regressions (infinite loop in DAGTypeLegalizer::RemapId)
after r334880. This patch makes sure that we do map a TableId to
itself.
Reviewers: niravd
Reviewed By: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48364
llvm-svn: 335141
Summary:
The waterfall no longer builds .s files and no longers uses
the wasm-o when it builds object files.
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48371
llvm-svn: 335135
This is part of a move towards generalizing the alternate opcode mechanism and not just supporting (F)Add/(F)Sub counterparts.
The patch embeds the AltOpcode in the InstructionsState instead of calling getAltOpcode so often.
I'm hoping to eventually remove all uses of getAltOpcode and handle alternate opcode selection entirely within getSameOpcode, that will require us to use InstructionsState throughout the BoUpSLP call hierarchy (similar to some of the changes in D28907), which I will begin in future patches.
Differential Revision: https://reviews.llvm.org/D48359
llvm-svn: 335134
D47985 saw the old SK_Alternate 'alternating' shuffle mask replaced with the SK_Select mask which accepts either input operand for each lane, equivalent to a vector select with a constant condition operand.
This patch updates SLPVectorizer to make full use of this SK_Select shuffle pattern by removing the 'isOdd()' limitation.
The AArch64 regression will be fixed by D48172.
Differential Revision: https://reviews.llvm.org/D48174
llvm-svn: 335130
For both operands are unsigned, the following optimizations are valid, and missing:
1. X > Y && X != 0 --> X > Y
2. X > Y || X != 0 --> X != 0
3. X <= Y || X != 0 --> true
4. X <= Y || X == 0 --> X <= Y
5. X > Y && X == 0 --> false
unsigned foo(unsigned x, unsigned y) { return x > y && x != 0; }
should fold to x > y, but I found we haven't done it right now.
besides, unsigned foo(unsigned x, unsigned y) { return x < y && y != 0; }
Has been folded to x < y, so there may be a bug.
Patch by: Li Jia He!
Differential Revision: https://reviews.llvm.org/D47922
llvm-svn: 335129
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335127
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335120
Thumb has more 16-bit encoding space dedicated to ADD than ORR, allowing both a
3-address encoding and a wider range of immediates. So, particularly when
optimizing for code size (but it doesn't make things worse elsewhere) it's
beneficial to select an OR operation to an ADD if we know overflow won't occur.
This is made even better by LLVM's penchant for putting operations in canonical
form by converting the other way.
llvm-svn: 335119
This patch teaches llvm-mca how to identify register writes that implicitly zero
the upper portion of a super-register.
On X86-64, a general purpose register is implemented in hardware as a 64-bit
register. Quoting the Intel 64 Software Developer's Manual: "an update to the
lower 32 bits of a 64 bit integer register is architecturally defined to zero
extend the upper 32 bits". Also, a write to an XMM register performed by an AVX
instruction implicitly zeroes the upper 128 bits of the aliasing YMM register.
This patch adds a new method named clearsSuperRegisters to the MCInstrAnalysis
interface to help identify instructions that implicitly clear the upper portion
of a super-register. The rest of the patch teaches llvm-mca how to use that new
method to obtain the information, and update the register dependencies
accordingly.
I compared the kernels from tests clear-super-register-1.s and
clear-super-register-2.s against the output from perf on btver2. Previously
there was a large discrepancy between the estimated IPC and the measured IPC.
Now the differences are mostly in the noise.
Differential Revision: https://reviews.llvm.org/D48225
llvm-svn: 335113
Summary:
Related to https://bugs.llvm.org/show_bug.cgi?id=37793, https://reviews.llvm.org/D46760#1127287
We'd like to do this canonicalization https://rise4fun.com/Alive/Gmc
But it is currently restricted by rL155136 / rL155362, which says:
```
// This is a constant shift of a constant shift. Be careful about hiding
// shl instructions behind bit masks. They are used to represent multiplies
// by a constant, and it is important that simple arithmetic expressions
// are still recognizable by scalar evolution.
//
// The transforms applied to shl are very similar to the transforms applied
// to mul by constant. We can be more aggressive about optimizing right
// shifts.
//
// Combinations of right and left shifts will still be optimized in
// DAGCombine where scalar evolution no longer applies.
```
I think these tests show that for *constants*, SCEV has no issues with that canonicalization.
Reviewers: mkazantsev, spatel, efriedma, sanjoy
Reviewed By: mkazantsev
Subscribers: sanjoy, javed.absar, llvm-commits, stoklund, bixia
Differential Revision: https://reviews.llvm.org/D48229
llvm-svn: 335101
Summary:
First off: i do not have any access to that processor,
so this is purely theoretical, no benchmarks.
I have been looking into b**d**ver2 scheduling profile, and while cross-referencing
the existing b**t**ver2, znver1 profiles, and the reference docs
(`Software Optimization Guide for AMD Family {15,16,17}h Processors`),
i have noticed that only b**t**ver2 scheduling profile specifies these.
Also, there is no mca test coverage.
Reviewers: RKSimon, craig.topper, courbet, GGanesh, andreadb
Reviewed By: GGanesh
Subscribers: gbedwell, vprasad, ddibyend, shivaram, Ashutosh, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D47676
llvm-svn: 335099
Summary:
I ran llvm-exegesis on SKX, SKL, BDW, HSW, SNB.
Atom is from Agner and SLM is a guess.
I've left AMD processors alone.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48079
llvm-svn: 335097
Summary:
If we get an error building the SelectionDAG for inline assembly we try to continue and still build the DAG.
But if the return type for the inline assembly is a struct we end up crashing because we try to create an UNDEF node with a struct type which isn't valid.
Instead we need to create an UNDEF for each element of the struct and join them with merge_values.
This patch relies on single operand merge_values being handled gracefully by getMergeValues. If the return type is void there will be no VTs returned by ComputeValueVTs and now we just return instead of calling setValue. Hopefully that's ok, I assumed nothing would need to look up the mapped value for void node.
Fixes PR37359
Reviewers: rengolin, rovka, echristo, efriedma, bogner
Reviewed By: efriedma
Subscribers: craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D46560
llvm-svn: 335093
Summary:
After r335018, the static tables are guaranteed sorted by the EVEX opcode to convert. We can use this to do a binary search and remove the need for any secondary data structures.
Right now one table is 736 entries and the other is 482 entries. It might make sense to merge the two tables as a follow up. The effort it takes to select the table is probably similar to the extra binary search step it would require for a larger table.
I haven't done any measurements to see if this has any effect on compile time, but I don't imagine that EVEX->VEX conversion is a place we spend a lot of time.
Reviewers: RKSimon, spatel, chandlerc
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48312
llvm-svn: 335092
This patch introduces two helpers to make it easier to ignore debug
intrinsics:
- Instruction::getNextNonDebugInstruction()
This is just like Instruction::getNextNode(), except that it skips debug
info.
- skipDebugInfo(BasicBlock::iterator)
A free function which advances a BasicBlock iterator past any debug
info. This is a no-op when the iterator already points to a non-debug
instruction.
Part of: llvm.org/PR37728
Related to: https://reviews.llvm.org/D47874
Differential Revision: https://reviews.llvm.org/D48305
llvm-svn: 335083
This patch covers up a fairly fundemental issue around remat and register allocation which shows up with psuedo instructions with more vreg uses than there are physical registers. This patch essentially just disables remat for STATEPOINTs which are the only case we've seen so far, but long term we need a better fix.
For STATEPOINTs specifically, this is a strict improvement. It unblocks progress towards enabling a currently off-by-default mode which integrates deopt bundle operand lowering with register allocator spilling so that we end up with smaller stack sizes and more optimally placed spills. Assming no other issues turn up during my next round of integration testing - which based on experience so far, is admittedly unlikely - we might finally be able to enable something I've been working towards in small bits and pieces for years now. :)
For psuedo ops in general, there are a couple of ideas for a "proper fix" discussed on the bug, but I'm far enough outside my knowledge area to not be able to see any of them through to a successful conclusion. If anyone wants to help out here, please do.
Differential Revision: https://reviews.llvm.org/D41098
llvm-svn: 335077
insertOutlinerPrologue was not used by any target, and prologue-esque code was
beginning to appear in insertOutlinerEpilogue. Refactor that into one function,
buildOutlinedFrame.
This just removes insertOutlinerPrologue and renames insertOutlinerEpilogue.
llvm-svn: 335076
Summary:
This fixes liveness tracking information after `drop` instruction
insertion in ExplicitLocals pass.
When a drop instruction is inserted to drop a dead register operand, the
original operand should be marked not dead anymore because it is now
used by the new drop instruction. And the operand to the new drop
instruction should be marked killed instead. This bug caused some
programs to fail when `llc` is run with `-verify-machineinstrs` option.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48253
llvm-svn: 335074
The optimizer is getting smarter (eg, D47986) about differentiating shuffles
based on its mask values, so we should make queries on the mask constant
operand generally available to avoid code duplication.
We'll probably use this soon in the vectorizers and instcombine (D48023 and
https://bugs.llvm.org/show_bug.cgi?id=37806).
We might clean up TTI a bit more once all of its current 'SK_*' options are
covered.
Differential Revision: https://reviews.llvm.org/D48236
llvm-svn: 335067
Summary:
Patch r323922 changed the sigil for physical registers to '$', instead of '%'.
An error message was missed during this change, and reports the wrong sigil.
This patch corrects that diagnostic and the tests that check that error string.
Reviewers: zer0, bjope
Reviewed By: bjope
Subscribers: bjope, thegameg, plotfi, llvm-commits
Differential Revision: https://reviews.llvm.org/D48086
llvm-svn: 335066
This value is the first vector instruction type in numerical order. The
previous value was incorrect, leaving TypeCVI_GATHER outside of the range
for vector instructions. This caused vector .new instructions to be
incorrectly encoded in the presence of gather.
llvm-svn: 335065
FMA3Info only exists as a managed static. As far as I know the ManagedStatic construction proccess is thread safe. It doesn't look like we ever access the ManagedStatic object without immediately doing a query on it that would require the map to be populated. So I don't think we're ever deferring the calculation of the tables from the construction of the object.
So I think we should be able to just populate the FMA3Info map directly in the constructor and get rid of all of the initGroupsOnce stuff.
Differential Revision: https://reviews.llvm.org/D48194
llvm-svn: 335064
There are no provided instruction definitions for this architecture.
Reviewers: smaksimovic, atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D48320
llvm-svn: 335057
Previously, some aliases were marked as not being available for microMIPS32R6,
but this was overridden at the top level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D48321
llvm-svn: 335053
The getArithmeticInstrCost calls for shuffle vectors entry costs specify TargetTransformInfo::OperandValueKind arguments, but are just using the method's default values. This seems to be a copy + paste issue and doesn't affect the costs in anyway. The TargetTransformInfo::OperandValueProperties default arguments are already not being used.
Noticed while working on D47985.
Differential Revision: https://reviews.llvm.org/D48008
llvm-svn: 335045
This patch replaces calls to X86-specific intrinsics with floor-ceil semantics
with calls to target-independent @llvm.floor.* and @llvm.ceil.* intrinsics. This
doesn't affect the resulting machine code, as those intrinsics are lowered to
the same instructions, but exposes these specific rounding cases to generic
optimizations.
Differential Revision: https://reviews.llvm.org/D48067
llvm-svn: 335039
This patch handles back-end folding of generic patterns created by lowering the
X86 rounding intrinsics to native IR in cases where the instruction isn't a
straightforward packed values rounding operation, but a masked operation or a
scalar operation.
Differential Revision: https://reviews.llvm.org/D45203
llvm-svn: 335037
LoopSimplifyCFG, being a loop pass, needs to preserve scalar
evolution. This invalidates SE for the loops altered during
block merging.
Differential Revision: https://reviews.llvm.org/D48258
llvm-svn: 335036
This is a fixup for r334830 causing problems in polly-aosp buildbot.
Focus in r334830 was to fix a problem seen with
ConvertDebugDeclareToDebugValue involving store instructions.
It also added some asserts to find out of similar problems
existed for the ConvertDebugDeclareToDebugValue functions
involving load and phi instructions. One of those asserts seems
to blow in the polly-aosp buildbot, so I'll revert the asserts
while debugging.
llvm-svn: 335031
This patch moves the logic to handle reduction PHI nodes to the end of
adjustLoopBranches. Reduction PHI nodes in the outer loop header can be
moved to the inner loop header and reduction PHI nodes from the inner loop
header can be moved to the outer loop header. In the latter situation,
we have to deal with 1 kind of PHI nodes:
PHI nodes that are part of inner loop-only reductions.
We can replace the PHI node with the value coming from outside
the inner loop.
Reviewers: mcrosier, efriedma, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D46198
llvm-svn: 335027
and expand it post RA basing on the register pressure. However, we miss to do the add-imm peephole for these pseudo instruction.
Differential Revision: https://reviews.llvm.org/D47568
Reviewed By: Nemanjai
llvm-svn: 335024
This patch adds logic to deal with the following constructions:
%iv = phi i64 ...
%trunc = trunc i64 %iv to i32
%cmp = icmp <pred> i32 %trunc, %invariant
Replacing it with
%iv = phi i64 ...
%cmp = icmp <pred> i64 %iv, sext/zext(%invariant)
In case if it is legal. Specifically, if `%iv` has signed comparison users, it is
required that `sext(trunc(%iv)) == %iv`, and if it has unsigned comparison
uses then we require `zext(trunc(%iv)) == %iv`. The current implementation
bails if `%trunc` has other uses than `icmp`, but in theory we can handle more
cases here (e.g. if the user of trunc is bitcast).
Differential Revision: https://reviews.llvm.org/D47928
Reviewed By: reames
llvm-svn: 335020
This adds an EVEX2VEXOverride string to the X86 instruction class in X86InstrFormats.td. If this field is set it will add manual entry in the EVEX->VEX tables that doesn't check the encoding information.
Then use this mechanism to map VMOVDU/A8/16, 128-bit VALIGN, and VPSHUFF/I instructions to VEX instructions.
Finally, remove the manual table from the emitter.
This has the bonus of fully sorting the autogenerated EVEX->VEX tables by their EVEX instruction enum value. We may be able to use this to do a binary search for the conversion and get rid of the need to create a DenseMap.
llvm-svn: 335018
EVEX makes heavy use of the VEX.W bit to indicate 64-bit element vs 32-bit elements. Many of the VEX instructions were split into 2 versions with different masking granularity.
The EVEX->VEX table generate can collapse the two versions if the VEX version uses is tagged as VEX_WIG. But if the VEX version is instead marked VEX.W==0 we can't combine them because we don't know if there is also a VEX version with VEX.W==1.
This patch adds a new VEX_W1X tag that indicates the EVEX instruction encodes with VEX.W==1, but is safe to convert to a VEX instruction with VEX.W==0.
This allows us to remove a bunch of manual EVEX->VEX table entries. We may want to look into splitting up the VEX_WPrefix field which would simplify the disassembler.
llvm-svn: 335017
This reverts r334428. It incorrectly marks some multiplications as nuw. Tim
Shen is working on a proper fix.
Original commit message:
[SCEV] Add nuw/nsw to mul ops in StrengthenNoWrapFlags where safe.
Summary:
Previously we would add them for adds, but not multiplies.
llvm-svn: 335016
The code was previously checking the L2 and L flag on 3 separate lines, treating the combination as an encoding. Instead its better to think of the L2 bit as being something that can't be done with VEX and early returning. Then we just need to check the L bit.
llvm-svn: 335015
Summary:
Added more utility functions that will be used in EH-related passes Also
changed `LoopBottom` function to `getBottom` and uses templates to be
able to handle other classes as well, which will be used in CFGSort
later.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48262
llvm-svn: 335006
Summary:
Add WasmEHFuncInfo and routines to calculate and fill in this struct to
keep track of unwind destination information. This will be used in
other EH related passes.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D48263
llvm-svn: 335005
Summary:
This patch changes the rethrow instruction to take a BB argument in LLVM
backend, like `br` and `br_if`s. This BB is a target catch BB the
rethrow instruction unwinds to. This BB argument will be converted to an
relative depth immediate at the end of CFGStackify pass, as in the same
way of branches.
RETHROW_TO_CALLER is a codegen-only instruction that should be used when
a rethrow instruction does not have an unwind destination BB, i.e., it
should rethrow to its caller function.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48260
llvm-svn: 334998
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47909
llvm-svn: 334996
The instructions that use this class don't have another source register. So I think this was just marking one of the address operands as ReadAfterLd?
llvm-svn: 334994
This reverts commit f976cf4cca0794267f28b54e468007fd476d37d9.
I am reverting this because it causes break in a few bots and its going
to take me sometime to look at this.
llvm-svn: 334993
Summary:
Simplify blockaddress usage before giving up in MergeBlockIntoPredecessor
This is a missing small optimization in MergeBlockIntoPredecessor.
This helps with one simplifycfg test which expects this case to be handled.
Reviewers: davide, spatel, brzycki, asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48284
llvm-svn: 334992
Summary:
One for register based, much like the existing definitions,
and one for stack based (suffix _S).
This allows us to use registers in most of LLVM (which works better),
and stack based in MC (which results in a simpler and more readable
assembler / disassembler).
Tried to keep this change as small as possible while passing tests,
follow-up commit will:
- Add reg->stack conversion in MI.
- Fix asm/disasm in MC to be stack based.
- Fix emitter to be stack based.
tests passing:
llvm-lit -v `find test -name WebAssembly`
test/CodeGen/WebAssembly
test/MC/WebAssembly
test/MC/Disassembler/WebAssembly
test/DebugInfo/WebAssembly
test/CodeGen/MIR/WebAssembly
test/tools/llvm-objdump/WebAssembly
Reviewers: dschuff, sbc100, jgravelle-google, sunfish
Subscribers: aheejin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48183
llvm-svn: 334985
Summary: Refactoring for all constant cases which require AllowNewConst and some staging for future fmf usage.
Reviewers: spatel, hfinkel, wristow
Reviewed By: spatel
Subscribers: nhaehnle
Differential Revision: https://reviews.llvm.org/D48289
llvm-svn: 334984
This patch uses the DiagnosticPredicate for SVE predicate patterns
to improve their diagnostics, now giving a 'invalid operand' diagnostic
if the type is not an immediate or one of the expected pattern
labels.
Reviewers: samparker, SjoerdMeijer, javed.absar, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48220
llvm-svn: 334983
The variants added by this patch are:
- SQINC signed increment, e.g. sqinc x0, w0, all, mul #4
- SQDEC signed decrement, e.g. sqdec x0, w0, all, mul #4
- UQINC unsigned increment, e.g. uqinc w0, all, mul #4
- UQDEC unsigned decrement, e.g. uqdec w0, all, mul #4
This patch includes asmparser changes to parse a GPR64 as a GPR32 in
order to satisfy the constraint check:
x0 == GPR64(w0)
in:
sqinc x0, w0, all, mul #4
^___^ (must match)
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47716
llvm-svn: 334980
Rather than having an exclusion list in tablegen sources, add a flag to the X86 instruction records that can be used to suppress checking for convertibility.
llvm-svn: 334971
This patch introduces a VPInstructionToVPRecipe transformation, which
allows us to generate code for a VPInstruction based VPlan re-using the
existing infrastructure.
Reviewers: dcaballe, hsaito, mssimpso, hfinkel, rengolin, mkuper, javed.absar, sguggill
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D46827
llvm-svn: 334969
CompileOnDemandLayer2 is a replacement for CompileOnDemandLayer built on the ORC
Core APIs. Functions in added modules are extracted and compiled lazily.
CompileOnDemandLayer2 supports multithreaded JIT'd code, and compilation on
multiple threads.
llvm-svn: 334967
materializing weak symbols as strong.
This removes some elaborate flag tweaking and plays nicer with RuntimeDyld,
which relies of weak/common flags to determine whether it should emit a given
weak definition. (Switching to strong up-front makes it appear as if there is
already an overriding definition, which would require an extra back-channel to
override).
llvm-svn: 334966
Ensure we keep track of the input vectors in all cases instead of just for SK_Select.
Ideally we'd reuse the shuffle mask pattern matching in TargetTransformInfo::getInstructionThroughput here to easily add support for all TargetTransformInfo::ShuffleKind without mass code duplication, I've added a TODO for now but D48236 should help us here.
Differential Revision: https://reviews.llvm.org/D48023
llvm-svn: 334958
This patch adds instructions for comparing elements from two vectors, e.g.
cmpgt p0.s, p0/z, z0.s, z1.s
and also adds support for comparing to a 64-bit wide element vector, e.g.
cmpgt p0.s, p0/z, z0.s, z1.d
The patch also contains aliases for certain comparisons, e.g.:
cmple p0.s, p0/z, z0.s, z1.s => cmpge p0.s, p0/z, z1.s, z0.s
cmplo p0.s, p0/z, z0.s, z1.s => cmphi p0.s, p0/z, z1.s, z0.s
cmpls p0.s, p0/z, z0.s, z1.s => cmphs p0.s, p0/z, z1.s, z0.s
cmplt p0.s, p0/z, z0.s, z1.s => cmpgt p0.s, p0/z, z1.s, z0.s
llvm-svn: 334931
Previously we heap allocated the X86InstrFMA3Group objects which were created by passing them small register/memory opcode arrays that existed as individual static tables.
Rather than a bunch of small static arrays we now have one large static table of X86InstrFMA3Group objects. Rather than storing a pointer to the opcode arrays in the X86InstrFMA3Group object, we now store have a register and memory array as part of the object. If a group doesn't have memory or register opcodes, the array entries will be 0.
This greatly simplifies the destruction of the X86InstrFMA3Info object. We no longer need to delete the X86InstrFMA3Group objects as we destruct the DenseMap. And we don't need to keep track of which ones we already deleted.
This reduces the llc binary size on my local machine by ~50k. I can only assume that's really due to the fact that we had something like 512 small static arrays that we passed to the init functions either one at a time or in pairs. So there were between 256 and 512 distinct calls to the init functions in the initOnceImpl method.
llvm-svn: 334925
We already have these aliases for EVEX enocded instructions, but not for the GPR, MMX, SSE, and VEX versions.
Also remove the vpextrw.s EVEX alias. That's not something gas implements.
llvm-svn: 334922
The .s assembly strings allow the reversed forms to be targeted from assembly which matches gas behavior. But when printing the instructions we should print them without the .s to match other tooling like objdump. By using InstAliases we can use the normal string in the instruction and just hide it from the assembly parser.
Ideally we'd add the .s versions to the legacy SSE and VEX versions as well for full compatibility with gas. Not sure how we got to state where only EVEX was supported.
llvm-svn: 334920
These increases the size of the static tables, but is closer to what we would get if used the autogenerated table directly. This reduces the remaining large deltas between what's in the manual table and what's in the autogenerated table.
llvm-svn: 334915
symbols in debug mode.
The MaterializationResponsibility class hijacks the Materializing flag to track
symbols that have not yet been resolved in order to guard against redundant
resolution. Since this is an API contract check and only enforced in debug mode
there is no reason to maintain the flag state in release mode.
llvm-svn: 334909
Some of the calls to hasSingleUseFromRoot were passing the load itself. If the load's chain result has a user this would count against that. By getting the true parent of the match and ensuring any intermediate between the match and the load have a single use we can avoid this case. isLegalToFold will take care of checking users of the load's data output.
This fixed at least fma-scalar-memfold.ll to succed without the peephole pass.
llvm-svn: 334908
Support for SVE's predicated select instructions to select elements
from either vector, both in a data-vector and a predicate-vector
variant.
llvm-svn: 334905
We don't want to prevent inlining because of target-cpu and -features
attributes that were added to newer versions of LLVM/Clang: There are
no incompatible functions in PTX, ptxas will throw errors in such cases.
Differential Revision: https://reviews.llvm.org/D47691
llvm-svn: 334904
These all have a short form encoding that the assembler already prefers. Though that preference seems to only be based on order in the .td fie. Hiding the long form saves space in the table and prevents us from breaking the implicit order based priority.
llvm-svn: 334897
VMOVPQIto64Zmr is not a 64-bit mode only instruction. But I don't know how to test this because VMOVPQIto64mr should always have priority over it in 32-bit mode since its only advantage is XMM16-XMM31 which aren't usable in 32-bit mode.
VMOVPQIto64Zrr is a 64-bit mode only instruction, but we don't need to explicitly mark it as such because it uses a GR64 register which won't parse in 32-bit mode.
llvm-svn: 334896
Summary:
We only modify CFG in a couple of places, and we can preserve DT there
with a little effort.
Reviewers: davide, vsk
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48059
llvm-svn: 334895
This is the common case in the BE when we serialize condition and then
rematerialize it. Use either original or inverted condition.
Differential Revision: https://reviews.llvm.org/D48246
llvm-svn: 334882
Relanding after fixing expensive check from modifying tables.
To avoid redundant work, during DAG legalization we keep tables
mapping pre-legalized SDValues to post-legalized SDValues and a
SDValue-to-SDValue map to enable fast node replacements. However, as
the keys are nodes which may be reused it is possible that an entry in
a table refers to a now deleted node N (that should have been renamed
by the value replacement map) while a new node N' exists. If N' is
then replaced that entry would be wrong. Previously we avoided this by
when potentially violating this property, walking every table and
updating all node pointers. This is very expensive but hopefully rare
occurance.
This patch assigns each instance of a SDValue used in legalization a
unique id and uses these ids in the legalization tables. This avoids
any such aliasing issue, avoiding the full table search and allowing
more aggressive incremental table pruning.
In some cases this is a 1000x speedup to compilation.
Reviewers: jyknight, echristo, bogner, tra
Reviewed By: bogner
Subscribers: dberris, grandinj, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47959
llvm-svn: 334880
Summary: This patch originated from D47388 and is a proper subset of the originating changes, containing only the fmf optimization guard extensions.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar, rampitec, nhaehnle, nemanjai
Reviewed By: rampitec, nhaehnle
Subscribers: tpr, nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47918
llvm-svn: 334876
Summary:
Sending for presubmit review out of an abundance of caution; it would be
bad to mess this up.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48238
llvm-svn: 334875
Summary:
Obviates the need for mask/clear/setFlags helpers.
There are some expressions here which can be simplified, but to keep
this easy to review, I have not simplified them in this patch.
No functional change.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48237
llvm-svn: 334874
So far, we've only handled special cases of PatFrag like ImmLeaf. This patch
adds support for the remaining cases using similar mechanisms.
Like most C++ code from SelectionDAG, GISel and DAGISel expect to operate on
different types and representations and as such the code is not compatible
between the two. It's therefore necessary to add an alternative implementation
in the GISelPredicateCode field.
The target test for this feature could easily be done with IntImmLeaf and this
would save on a little boilerplate. The reason I've chosen to implement this
using PatFrag.GISelPredicateCode and not IntImmLeaf is because I was unable to
find a rule that was blocked solely by lack of support for PatFrag predicates. I
found that the ones I investigated as being likely candidates for the test
were further blocked by other things.
llvm-svn: 334871
Not sure any of these matter today because I don't think we ever produce them with IMPLICIT_DEF as an input. But by listing them we don't be suprised in the future.
llvm-svn: 334867
Modify ExpandStrictFPOp(...) to handle nodes that have scalar
operands.
Also, add a Strict FMA test and do some other light cleanup in the
Strict FP code.
Differential Revision: https://reviews.llvm.org/D48149
llvm-svn: 334863
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47954
llvm-svn: 334862
Summary:
Using associated metadata rather than llvm.used allows linkers to
perform dead stripping with -fsanitize-coverage=pc-table. Unfortunately
in my local tests, LLD was the only linker that made use of this metadata.
Partially addresses https://bugs.llvm.org/show_bug.cgi?id=34636 and fixes
https://github.com/google/sanitizers/issues/971.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: Dor1s, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D48203
llvm-svn: 334858
Enables using the high and high-adjusted symbol modifiers on thread local
storage modifers in powerpc assembly. Needed to be able to support 64 bit
thread-pointer and dynamic-thread-pointer access sequences.
Differential Revision: https://reviews.llvm.org/D47754
llvm-svn: 334856
Add support for the "@high" and "@higha" symbol modifiers in powerpc64 assembly.
The modifiers represent accessing the segment consiting of bits 16-31 of a
64-bit address/offset.
Differential Revision: https://reviews.llvm.org/D47729
llvm-svn: 334855
An earlier commit prevented folds from the peephole pass by checking for IMPLICIT_DEF. But later in the pipeline IMPLICIT_DEF just becomes and Undef flag on the input register so we need to check for that case too.
llvm-svn: 334848
When coalescing a small register into a subregister of a larger register,
if the larger register is rematerialized, the function updateRegDefUses
can add an <undef> flag to the rematerialized definition (since it's
treating it as only definining the coalesced subregister). While with that
assumption doing so is not incorrect, make sure to remove the flag later
on after the call to updateRegDefUses.
llvm-svn: 334845
Summary:
When iterating users of a multiply in processUMulZExtIdiom, the
call to setOperand in the truncation case may replace the use
being visited; make sure the iterator has been advanced before
doing that replacement.
Reviewers: majnemer, davide
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48192
llvm-svn: 334844
We were unnecessarily going from SmallString to std::string just to
get a null-terminated C string. So just...don't do that. Crash
slightly faster!
llvm-svn: 334841
This is a minor fix for LV cost model, where the cost for VF=2 was
computed twice when the vectorization of the loop was forced without
specifying a VF.
Reviewers: xusx595, hsaito, fhahn, mkuper
Reviewed By: hsaito, xusx595
Differential Revision: https://reviews.llvm.org/D48048
llvm-svn: 334840
Increment/decrement scalar register by (scaled) element count given by
predicate pattern, e.g. 'incw x0, all, mul #4'.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47713
llvm-svn: 334838
Try to access pieces 4 bytes at a time. This helps
various hasOneUse extract_vector_elt combines, such
as load width reductions.
Avoids test regressions in a future commit.
llvm-svn: 334836
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
Some instructions require of a limited set of FP immediates as operands,
for example '#0.5 or #1.0' for SVE's FADD instruction.
This patch adds support for parsing and printing such FP immediates as
exact values (e.g. #0.499999 is not accepted for #0.5).
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47711
llvm-svn: 334826
Summary:
We already do it for splat constants, but not just values.
Also, undef cases are mostly non-functional.
The original commit was reverted because
it broke tests for amdgpu backend, which i didn't check.
Now, the backed was updated to recognize these new
patterns, so we are good.
https://bugs.llvm.org/show_bug.cgi?id=37603https://rise4fun.com/Alive/cplX
Reviewers: spatel, craig.topper, mareko, bogner, rampitec, nhaehnle, arsenm
Reviewed By: spatel, rampitec, nhaehnle
Subscribers: wdng, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D47980
llvm-svn: 334818
Summary: The same pattern as D48010, but this one is IR-canonical as of D47428.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48012
llvm-svn: 334817
Summary:
As a followup for D48007.
Since we already handle `x << (bitwidth - y) >> (bitwidth - y)` pattern,
which does not have ub for both the edge cases (`y == 0`, `y == bitwidth`),
i think also handling a pattern that is ub for `y == bitwidth` should be fine.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48010
llvm-svn: 334816
Summary:
D47980 will canonicalize the `x << (32 - y) >> (32 - y)`,
which is the pattern the AMDGPU expects to `x & (-1 >> (32 - y))`,
which is not recognized by AMDGPU.
Thus, it needs to be recognized, too.
Reviewers: nhaehnle, bogner, tstellar, arsenm
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #amdgpu
Differential Revision: https://reviews.llvm.org/D48007
llvm-svn: 334815
Instruction bundling is only supported on descendants of the
MCEncodedFragment type. By moving the bundling functionality and
MCSubtargetInfo to this class it makes it easier to set and extract the
MCSubtargetInfo when it is necessary.
This is a refactoring change that will make it easier to pass the
MCSubtargetInfo through to writeNops when nop padding is required.
Differential Revision: https://reviews.llvm.org/D45959
llvm-svn: 334814
I think this covers most of the unmasked vector instructions. We're still missing a lot of the masked instructions.
There are some test changes here because of the new folding support. I don't think these particular cases should be folded because it creates an undef register dependency. I think the changes introduced in r334175 are not handling stack folding. They're only blocking the peephole pass.
llvm-svn: 334800
IEEE 754 defines the expected result on overflow. As far as I know,
hardware implementations (of f16), and compiler-rt (__floatuntisf)
correctly return +-Inf on overflow. And I can't think of any useful
transform that would take advantage of overflow being undefined here.
Differential Revision: https://reviews.llvm.org/D47807
llvm-svn: 334777
Once a symbol has been selected for materialization it can no longer be
overridden. Stripping the weak flag guarantees this (override attempts will
then be treated as duplicate definitions and result in a DuplicateDefinition
error).
llvm-svn: 334771
Summary:
Here we relax the old constraint which utilized unsafe with the TargetOption flag HonorSignDependentRoundingFPMathOption, with the assertion that unsafe is no longer needed or never was required for correctness on FDIV/FMUL.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: efriedma, wdng, tpr
Differential Revision: https://reviews.llvm.org/D48057
llvm-svn: 334769
In particular, when asked to print a MemoryAccess, we'll now print where
defs are optimized to, and we'll print optimized access types.
This patch also introduces an operator<< to make printing AliasResults
easier.
Patch by Juneyoung Lee!
Differential Revision: https://reviews.llvm.org/D47860
llvm-svn: 334760
isVectorClearMaskLegal() is the TLI hook used by the generic
DAGCombiner::XformToShuffleWithZero().
We've grown to accomodate/expect this transform to shuffle
(disabling it more generally results in many regressions).
So I'm narrowly excluding the 256-bit types that clearly
are not worthwhile for AVX1.
I think in most cases we are able to recover by converting
the shuffle back into 'and' ops, but the cases in:
https://bugs.llvm.org/show_bug.cgi?id=37749
...show that there are cracks.
llvm-svn: 334759
This is r334750 (which was reverted in r334754) with a fix for an
uninitialized variable that was caught by msan.
Original commit message:
> If a copy bundle happens to involve overlapping registers, we can end
> up with emitting the copies in an order that ends up clobbering some
> of the subregisters. Since instructions in the copy bundle
> semantically happen at the same time, this is incorrect and we need to
> make sure we order the copies such that this doesn't happen.
llvm-svn: 334756
Summary: A FMF constraint is added to FADD with unsafe still available as the fallback
Reviewers: spatel, wristow, arsenm, hfinkel
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D48180
llvm-svn: 334753
WebAssembly doesn't support more than one function per section
and we rely on function sections being unique. This change ignores
the section provided by the function to avoid two functions being
in the same section.
Without this change the object writer produces the following
error for this test:
LLVM ERROR: section already has a defining function: baz
Differential Revision: https://reviews.llvm.org/D48178
llvm-svn: 334752
If a copy bundle happens to involve overlapping registers, we can end
up with emitting the copies in an order that ends up clobbering some
of the subregisters. Since instructions in the copy bundle
semantically happen at the same time, this is incorrect and we need to
make sure we order the copies such that this doesn't happen.
Differential Revision: https://reviews.llvm.org/D48154
llvm-svn: 334750
Summary:
Specifically, we transform
zext(2^K * (trunc X to iN)) to iM ->
2^K * (zext(trunc X to i{N-K}) to iM)<nuw>
This is helpful because pulling the 2^K out of the zext allows further
optimizations.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits, timshen
Differential Revision: https://reviews.llvm.org/D48158
llvm-svn: 334737
Summary:
Previously we would do this simplification only if it did not introduce
any new truncs (excepting new truncs which replace other cast ops).
This change weakens this condition: If the number of truncs stays the
same, but we're able to transform trunc(X + Y) to X + trunc(Y), that's
still simpler, and it may open up additional transformations.
While we're here, also clean up some duplicated code.
Reviewers: sanjoy
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48160
llvm-svn: 334736
This reverts rL331412. We didn't up using fragment atoms
in the wasm object writer after all.
Differential Revision: https://reviews.llvm.org/D48173
llvm-svn: 334734
To avoid redundant work, during DAG legalization we keep tables
mapping pre-legalized SDValues to post-legalized SDValues and a
SDValue-to-SDValue map to enable fast node replacements. However, as
the keys are nodes which may be reused it is possible that an entry in
a table refers to a now deleted node N (that should have been renamed
by the value replacement map) while a new node N' exists. If N' is
then replaced that entry would be wrong. Previously we avoided this by
when potentially violating this property, walking every table and
updating all node pointers. This is very expensive but hopefully rare
occurance.
This patch assigns each instance of a SDValue used in legalization a
unique id and uses these ids in the legalization tables. This avoids
any such aliasing issue, avoiding the full table search and allowing
more aggressive incremental table pruning.
In some cases this is a 1000x speedup to compilation.
Reviewers: jyknight, echristo, bogner, tra
Reviewed By: bogner
Subscribers: dberris, grandinj, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47959
llvm-svn: 334729
If WaitUntilReady is set to true then blockingLookup will return once all
requested symbols are ready. If WaitUntilReady is set to false then
blockingLookup will return as soon as all requested symbols have been
resolved. In the latter case, if any error occurs in finalizing the symbols it
will be reported to the ExecutionSession, rather than returned by
blockingLookup.
llvm-svn: 334722
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
llvm-svn: 334710
This patches teaches EarlyCSE to figure out that if `and i1 %x, %y` is true then both
`%x` and `%y` are true in the taken branch, and if `or i1 %x, %y` is false then both
`%x` and `%y` are false in non-taken branch. Fix for PR37635.
Differential Revision: https://reviews.llvm.org/D47574
Reviewed By: reames
llvm-svn: 334707
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
This is part of the work to cleanup use of 'alternate' ops so we can use the more general SK_Select shuffle type.
Only getSameOpcode calls getMainOpcode and much of the logic is repeated in both functions. This will require some reworking of D28907 but that patch has hit trouble and is unlikely to be completed anytime soon.
Differential Revision: https://reviews.llvm.org/D48120
llvm-svn: 334701
Summary:
The tests in:
https://bugs.llvm.org/show_bug.cgi?id=37751
...show miscompiles because we wrongly mapped and folded x86-specific intrinsics into generic DAG nodes.
This patch corrects the mappings in X86IntrinsicsInfo.h and adds isel matching corresponding to the new patterns. The complete tests for the failure cases should be in avx-cvttp2si.ll and sse-cvttp2si.ll and avx512-cvttp2i.ll
Reviewers: RKSimon, gbedwell, spatel
Reviewed By: spatel
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D47993
llvm-svn: 334685
This is failing to compile when LLVM_ENABLE_THREADS is false,
and the fix is not immediately obvious, so reverting while I look
into it.
llvm-svn: 334658
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Fixed test instead of adding a new one originally from r334649.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334657
Such globals are very likely to be part of a sorted section array, such
the .CRT sections used for dynamic initialization. The uses its own
sorted sections called ATL$__a, ATL$__m, and ATL$__z. Instead of special
casing them, just look for the dollar sign, which is what invokes linker
section sorting for COFF.
Avoids issues with ASan and the ATL uncovered after we started
instrumenting comdat globals on COFF.
llvm-svn: 334653
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334649
Previously ThreadPool could only queue async "jobs", i.e. work
that was done for its side effects and not for its result. It's
useful occasionally to queue async work that returns a value.
From an API perspective, this is very intuitive. The previous
API just returned a shared_future<void>, so all we need to do is
make it return a shared_future<T>, where T is the type of value
that the operation returns.
Making this work required a little magic, but ultimately it's not
too bad. Instead of keeping a shared queue<packaged_task<void()>>
we just keep a shared queue<unique_ptr<TaskBase>>, where TaskBase
is a class with a pure virtual execute() method, then have a
templated derived class that stores a packaged_task<T()>. Everything
else works out pretty cleanly.
Differential Revision: https://reviews.llvm.org/D48115
llvm-svn: 334643
On Windows we've observed that if you open a file, write to it, map it into
memory and close the file handle, the contents of the memory mapping can
sometimes be incorrect. That was what we did when adding an entry to the
ThinLTO cache using the TempFile and MemoryBuffer classes, and it was causing
intermittent build failures on Chromium's ThinLTO bots on Windows. More
details are in the associated Chromium bug (crbug.com/786127).
We can prevent this from happening by keeping a handle to the file open while
the mapping is active. So this patch changes the mapped_file_region class to
duplicate the file handle when mapping the file and close it upon unmapping it.
One gotcha is that the file handle that we keep open must not have been
created with FILE_FLAG_DELETE_ON_CLOSE, as otherwise the operating system
will prevent other processes from opening the file. We can achieve this
by avoiding the use of FILE_FLAG_DELETE_ON_CLOSE altogether. Instead,
we use SetFileInformationByHandle with FileDispositionInfo to manage the
delete-on-close bit. This lets us remove the hack that we used to use to
clear the delete-on-close bit on a file opened with FILE_FLAG_DELETE_ON_CLOSE.
A downside of using SetFileInformationByHandle/FileDispositionInfo as
opposed to FILE_FLAG_DELETE_ON_CLOSE is that it prevents us from using
CreateFile to open the file while the flag is set, even within the same
process. This doesn't seem to matter for almost every client of TempFile,
except for LockFileManager, which calls sys::fs::create_link to create a
hard link from the lock file, and in the process of doing so tries to open
the file. To prevent this change from breaking LockFileManager I changed it
to stop using TempFile by effectively reverting r318550.
Differential Revision: https://reviews.llvm.org/D48051
llvm-svn: 334630
Currently the handle type is a global pointer which holds 8 bytes.
We need a larger type which hold 16 bytes, therefore change it
to [i64 x 2].
Differential Revision: https://reviews.llvm.org/D48094
llvm-svn: 334625
We're constant folding here, so we shouldn't check uses. This matches
the IR optimizer behavior.
The x86 test shows the expected win. The AArch64 test shows something
else. This only seems to happen if the "generic" AArch64 CPU model is
used by MachineCombiner, so I'll file a bug report to follow-up.
llvm-svn: 334608
Summary:
The code that handles ISD:Register and ISD::CopyFromReg assumes
the target is amdgcn, so this is broken on r600. We don't
need this analysis on r600 anyway so we can safely move
it to SITargetLowering.
Reviewers: alex-t, arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: msearles, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46298
llvm-svn: 334607
Add a helper function to expand constrained FP operations as needed.
Note that the Strict POWI operation is not handled in this patch since
the format is slightly different from the others.
Differential Revision: https://reviews.llvm.org/D47491
llvm-svn: 334603
Even if we support no-canonical-prefix on
clang-cl(https://reviews.llvm.org/D47480), argv0 becomes absolute path
in clang-cl and that embeds absolute path in /showIncludes.
This patch removes such full path normalization from InitLLVM on
windows, and that removes absolute path from clang-cl output
(obj/stdout/stderr) when debug flag is disabled.
Patch by Takuto Ikuta!
Differential Revision https://reviews.llvm.org/D47578
llvm-svn: 334602
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
It introduces reduction of two instructions into one instruction:
Two SW instructions are transformed into one SWP instrucition.
Two LW instructions are transformed into one LWP instrucition.
Differential Revision: https://reviews.llvm.org/D39115
llvm-svn: 334595
This shortcoming was noted in D47330, and the test diffs show we already
had other examples where we failed to fold to a SHRUNKBLEND:
/// Dynamic (non-constant condition) vector blend where only the sign bits
/// of the condition elements are used. This is used to enforce that the
/// condition mask is not valid for generic VSELECT optimizations.
This patch implements an idea from D48043 and would obsolete that patch
because it catches more cases (notable the AVX1 case that was missed there).
All we're doing is allowing the existing transform to fire more often by
removing the post-legalize constraint. All of the relevant feature checks
and other predicates are left as-is.
Differential Revision: https://reviews.llvm.org/D48078
llvm-svn: 334592
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
This patch adds lowering for atomic fences and relies on AtomicExpandPass to
lower atomic loads/stores, atomic rmw, and cmpxchg to __atomic_* libcalls.
test/CodeGen/RISCV/atomic-* are modelled on the exhaustive
test/CodeGen/PPC/atomics-regression.ll, and will prove more useful once RV32A
codegen support is introduced.
Fence mappings are taken from table A.6 in the current draft of version 2.3 of
the RISC-V Instruction Set Manual, which incorporates the memory model changes
and definitions contributed by the RISC-V Memory Consistency Model task group.
Differential Revision: https://reviews.llvm.org/D47587
llvm-svn: 334590
Summary:
For targets I'm not familiar with, I've automatically made the "default to 1 for each resource" behaviour explicit in the td files.
For more obvious cases, I've ventured a fix.
Some notes:
- Exynos is especially fishy.
- AArch64SchedThunderX2T99.td had some truncated entries. If I understand correctly, the person who wrote that interpreted the ResourceCycle as a range. I made the decision to use the upper/lower bound for consistency with the 'Latency' value. I'm sure there is a better choice.
- The change to X86ScheduleBtVer2.td is an NFC, it just makes values more explicit.
Also see PR37310.
Reviewers: RKSimon, craig.topper, javed.absar
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46356
llvm-svn: 334586
This patch fixes a failure in lnt tests with -verify-machineinstrs option.
When VSX Swap Removal pass swaps two register operands, it did not maintain kill flags associated with operands. This patch swaps flags as well as register number to avoid inconsistent kill flags information.
llvm-svn: 334579
Summary:
This method was not correct for entries in DWO files as it assumed it
could just add up the CU and DIE offsets to get the absolute DIE offset.
This is not correct for the DWO files, as here the CU offset will
reference the skeleton unit, whereas the DIE offset will be the offset
in the full unit in the DWO file.
Unfortunately, this means that we are not able to determine the absolute
DIE offset using the information in the .debug_names section alone,
which means we have to offload some of this work to the users of this
class.
To demonstrate how this can be done, I've added/fixed the ability to
lookup entries using accelerator tables in DWO files in llvm-dwarfdump.
To make this happen, I've needed to make two extra changes in other
classes:
- made the DWARFContext method to lookup a CU based on the section
offset public. I've needed this functionality to lookup a CU, and this
seems like a useful thing in general.
- made DWARFUnit::getDWOId call extractDIEsIfNeeded. Before this, the
DWOId was filled in only if the root DIE happened to be parsed
before we called the accessor. Since the lazy parsing is supposed to
happen under the hood, calling extractDIEsIfNeeded seems appropriate.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D48009
llvm-svn: 334578
IndVarSimplify sometimes makes transforms basing on users that are trivially dead. In particular,
if DCE wasn't run before it, there may be a dead `sext/zext` in loop that will trigger widening
transforms, however it makes no sense to do it.
This patch teaches IndVarsSimplify ignore the mist trivial cases of that.
Differential Revision: https://reviews.llvm.org/D47974
Reviewed By: sanjoy
llvm-svn: 334567
Previously we were whitelisting in instructions based on their SchedRW value. With the masked store instructions explicitly removed via NotMemoryFoldable, we don't seem to need this check anymore.
llvm-svn: 334563
If a VSO has a fallback definition generator attached it will be called during
lookup (and lookupFlags) for any unresolved symbols. The definition generator
can add new definitions to the VSO for any unresolved symbol. This allows VSOs
to generate new definitions on demand.
The immediate use case for this code is supporting VSOs that can import
definitions found via dlsym on demand.
llvm-svn: 334538
Resolvers are required to find results for all requested symbols or return an
error, but if a resolver fails to adhere to this contract (by returning results
for only a subset of the requested symbols) then this code will infinite loop.
This assertion catches resolvers that fail to adhere to the contract.
llvm-svn: 334536
This only affects modules with lazy GVMaterializers attached (usually modules
read off disk using the lazy bitcode reader). For such modules, materializing
before compiling prevents crashes due to missing function bodies /
initializers.
llvm-svn: 334535
Register x20 is a callee-saved register which may be used for other
purposes in certain contexts, for example to hold special variables
within the kernel. This change adds support for reserving this register
both to frontend and backend to make this register usable for these
purposes.
Differential Revision: https://reviews.llvm.org/D46552
llvm-svn: 334531
All COFF targets should use @IMGREL32 relocations for symbol differences
against __ImageBase. Do the same for getSectionForConstant, so that
immediates lowered to globals get merged across TUs.
Patch by Chris January
Differential Revision: https://reviews.llvm.org/D47783
llvm-svn: 334523
Apparently, MachineInstr class definition as well as pretty much all of
the machine passes assume that the only kind of MachineInstr's operands
that is variadic for variadic opcodes is explicit non-definitions.
In particular, this assumption is made by MachineInstr::defs(), uses(),
and explicit_uses() methods, as well as by MachineCSE pass.
The assumption is incorrect judging from at least TableGen backend
implementation, that recognizes variable_ops in OutOperandList, and the
very existence of G_UNMERGE_VALUES generic opcode, or ARM load multiple
instructions, all of which have variadic defs.
In particular, MachineCSE pass breaks MIR with CSE'able G_UNMERGE_VALUES
instructions in it.
This commit implements MachineInstr::getNumExplicitDefs() similar to
pre-existing MachineInstr::getNumExplicitOperands(), fixes
MachineInstr::defs(), uses(), and explicit_uses(), and fixes MachineCSE
pass.
As the issue addressed seems to affect only machine passes that could be
ran mid-GlobalISel pipeline at the moment, the other passes aren't fixed
by this commit, like MachineLICM: that could be done on per-pass basis
when (if ever) they get adopted for GlobalISel.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D45640
llvm-svn: 334520
- Do not emit following assembler directives:
- .hsa_code_object_version
- .hsa_code_object_isa
- .amd_amdgpu_isa
- .amd_amdgpu_hsa_metadata
- .amd_amdgpu_pal_metadata
- Do not emit .note entries
- Cleanup and bring in sync kernel descriptor header file
- Emit kernel descriptor into .rodata with appropriate relocations and
alignments
llvm-svn: 334519
This simplifies some code which had StringRefs to begin with, and
makes other code more complicated which had const char* to begin
with.
In the end, I think this makes for a more idiomatic and platform
agnostic API. Not all platforms launch process with null terminated
c-string arrays for the environment pointer and argv, but the api
was designed that way because it allowed easy pass-through for
posix-based platforms. There's a little additional overhead now
since on posix based platforms we'll be takign StringRefs which
were constructed from null terminated strings and then copying
them to null terminate them again, but from a readability and
usability standpoint of the API user, I think this API signature
is strictly better.
llvm-svn: 334518
Summary:
This is similar to D46319 (ARM). x86-64 psABI p40 gives an example:
leaq _GLOBAL_OFFSET_TABLE(%rip), %r15 # GOTPC32 reloc
GNU as creates R_X86_64_GOTPC32. However, MC currently emits R_X86_64_PC32.
Reviewers: javed.absar, echristo
Subscribers: kristof.beyls, llvm-commits, peter.smith, grimar
Differential Revision: https://reviews.llvm.org/D47507
llvm-svn: 334515
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fmul.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: nhaehnle, wdng
Differential Revision: https://reviews.llvm.org/D47911
llvm-svn: 334514
As discussed on PR33744, this patch relaxes ShuffleKind::SK_Alternate which requires shuffle masks to only match an alternating pattern from its 2 sources:
e.g. v4f32: <0,5,2,7> or <4,1,6,3>
This seems far too restrictive as most SIMD hardware which will implement it using a general blend/bit-select instruction, so replaces it with SK_Select, permitting elements from either source as long as they are inline:
e.g. v4f32: <0,5,2,7>, <4,1,6,3>, <0,1,6,7>, <4,1,2,3> etc.
This initial patch just updates the name and cost model shuffle mask analysis, later patch reviews will update SLP to better utilise this - it still limits itself to SK_Alternate style patterns.
Differential Revision: https://reviews.llvm.org/D47985
llvm-svn: 334513
Don't provide the assembler source as the "root file" unless the user
asked to have debug info for the assembler source (with -g).
If the source doesn't provide an explicit ".file 0" then (a) use the
compilation directory as directory #0, and (b) use the file #1 info
for file #0 also.
Differential Revision: https://reviews.llvm.org/D48055
llvm-svn: 334512
As discussed on D47985, identity shuffle masks should probably be free.
I've limited this to the case where the input and output types all match - but we could probably accept all cases.
Differential Revision: https://reviews.llvm.org/D47986
llvm-svn: 334506
Implement default legalization of rotates: either in terms of the rotation
in the opposite direction (if legal), or in terms of shifts and ors.
Implement generating of rotate instructions for Hexagon. Hexagon only
supports rotates by an immediate value, so implement custom lowering of
ROTL/ROTR on Hexagon. If a rotate is not legal, use the default expansion.
Differential Revision: https://reviews.llvm.org/D47725
llvm-svn: 334497
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
llvm-svn: 334492
Extend LONG_BRANCH_LUi and LONG_BRANCH_ADDiu pseudo instructions with
additional flag, so instead of always lowering to lui %hi(...),
addiu %lo(...) or addiu %hi(...), now they can lower to either %lo, %hi,
%higher or %highest depending on the added flag.
Differential Revision: https://reviews.llvm.org/D47941
llvm-svn: 334490
These include PUSH/POP instructions that don't match the manual table. This also includes CMPXCHG which we never emit in non-locked form.
llvm-svn: 334479
Most of these are system instructions or other instructions we don't use in CodeGen. No point wasting space for them in the table. Removing them from the autogenerated table makes it easier to review the manual table.
A few are real opcode collisions where the memory and register forms are completely different instructions.
llvm-svn: 334474
We were missing packed isel folding patterns for all of sse41, avx, and avx512.
For some reason avx512 had scalar load folding patterns under optsize(due to partial/undef reg update), but we didn't have the equivalent sse41 and avx patterns.
Sometimes we would get load folding due to peephole pass anyway, but we're also missing avx512 instructions from the load folding table. I'll try to fix that in another patch.
Some of this was spotted in the review for D47993.
This patch adds all the folds to isel, adds a few spot tests, and disables the peephole pass on a few tests to ensure we're testing some of these patterns.
llvm-svn: 334460
The use iterator, used within findMaskOperands(), can return anything which is
not a def. isUse() requires a register, so check isReg() before calling isUse().
Differential Revision: https://reviews.llvm.org/D48047
llvm-svn: 334459
Name table occupies a big chunk of size in current binary format sample profile.
In order to reduce its size, the patch changes the sample writer/reader to
save/restore MD5Hash of names in the name table. Sample annotation phase will
also use MD5Hash of name to query samples accordingly.
Experiment shows compact binary format can reduce the size of sample profile by
2/3 compared with binary format generally.
Differential Revision: https://reviews.llvm.org/D47955
llvm-svn: 334447
This would fail before because 1x vectors aren't legal,
so instead just use the scalar type.
Avoids regressions in a future AMDGPU commit to add
v4i16/v4f16 as legal types.
Test update is just the one test that this triggers
on in tree now. It wasn't checking anything before.
The result is completely changed since the selects
are eliminated. Not sure if it's considered better
or not.
llvm-svn: 334440
All of the cases are already wrapped in curly braces so declaring a variable there isn't an issue. And the variables aren't assigned or used in the larger scope.
llvm-svn: 334436
Summary:
Previously we would add them for adds, but not multiplies.
Reviewers: sanjoy
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48038
llvm-svn: 334428
Necessary for D46276 as even though btver2 doesn't use these instructions, its now flagged as complete so complains if ANY instruction isn't tagged.....
UnsupportedFeatures wouldn't help here as these instructions don't appear to have a feature predicate (like a lot of AVX512).
llvm-svn: 334423
Rational: if there is indirect access that is usually an issue
because load is not ready by the use. However, if use is inside a
loop and load is outside that is potentially an issue for a first
iteration only.
Differential Revision: https://reviews.llvm.org/D47740
llvm-svn: 334420
When program is compiled for mips3 with n64 abi, wrong register class
is used for creating an emergency spill slot. This patch fixes the
correct register class to be chosen.
This patch resolves PR35859.
Thanks to John Baldwin for reporting the issue!
Differential Revision: https://reviews.llvm.org/D47938
llvm-svn: 334419
This sets trackLivenessAfterRegAlloc on AVRRegisterInfo.
Most existing targets set this flag. Without it, specific IR inputs
cause LLVM to fail with:
Assertion failed: (getParent()->getProperties().hasProperty( MachineFunctionProperties::Property::TracksLiveness) &&
"Liveness information is accurate"), function livein_begin
file MachineBasicBlock.cpp, line 1354.
With this commit, this no longer happens.
Patch by Peter Nimmervoll.
llvm-svn: 334409
Summary:
This fixes most of the scheduling info for SKX vector operations.
I had to split a lot of the YMM/ZMM classes into separate classes for YMM and ZMM.
The before/after llvm-exegesis analysis are in the phabricator diff.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47721
llvm-svn: 334407
It's been reported
<http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20180611/559616.html>
that template argument deduction for RetryAfterSignal fails if open is
not prefixed with "::".
This should help us build correctly on those platforms and explicitly
specifying the namespace is more correct anyway.
llvm-svn: 334403
Summary:
This kind of functionality is useful to other project apart from clang.
LLDB works with version numbers a lot, but it does not have a convenient
abstraction for this. Moving this class to a lower level library allows
it to be freely used within LLDB.
Since this class is used in a lot of places in clang, and it used to be
in the clang namespace, it seemed appropriate to add it to the list of
adopted classes in LLVM.h to avoid prefixing all uses with "llvm::".
Also, I didn't find any tests specific for this class, so I wrote a
couple of quick ones for the more interesting bits of functionality.
Reviewers: zturner, erik.pilkington
Subscribers: mgorny, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D47887
llvm-svn: 334399
Summary: In preparation for D47721. HSW and SNB still define unsupported
classes as they are used by KNL and generic models respectively.
Reviewers: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47763
llvm-svn: 334389
Summary: When compiling with -fpic, in contrast to -fPIC, use only the
immediate field to index into the GOT. This saves space if the GOT is
known to be small. The linker will warn if the GOT is too large for
this method.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: brad, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47136
llvm-svn: 334383
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 334382
This patch started off much more general and ambitious, but it's been a nightmare
seeing all the ways x86 vector codegen can go wrong.
So the code is still structured to allow extending easily, but it's currently
limited in several ways:
1. Only handle cases with an extending load.
2. Only handle cases with a zero constant compare.
3. Ignore setcc with vector bitmask (SetCCWidth != 1) - so AVX512 should be unaffected.
The motivating case from PR37427:
https://bugs.llvm.org/show_bug.cgi?id=37427
...is the 1st test, and that shows the expected win - we eliminated the unnecessary
intermediate cast.
There's a clear regression in the last test (sgt_zero_fp_select) because we longer
recognize a 'SHRUNKBLEND' opportunity. I think that general problem is also present
in sgt_zero, so I'll try to fix that in a follow-up. We need to match a sign-bit
setcc from a sign-extended operand and remove it.
Differential Revision: https://reviews.llvm.org/D47330
llvm-svn: 334378
I took some liberties and quoted fewer characters than before,
based on an article from MSDN which says that only certain characters
cause an arg to require quoting. This seems to be incorrect, though,
and worse it seems to be a difference in Windows version. The bot
that fails is Windows 7, and I can't reproduce the failure on Win
10. But it's definitely related to quoting and special characters,
because both tests that fail have a * in the argument, which is one
of the special characters that would cause an argument to be quoted
before but not any longer after the new patch.
Since I don't have Win 7, all I can do is just guess that I need to
restore the old quoting rules. So this patch does that in hopes that
it fixes the problem on Windows 7.
llvm-svn: 334375
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47447
llvm-svn: 334361
This reverts commit 65243b6d19143cb7a03f68df0169dcb63e8b4632.
Seems like it's not a flake. It might have something to do with
the '*' character being in a command line.
llvm-svn: 334356
There were a few linux compilation failures, but other than that
I think this was just a flake that caused the tests to fail. I'm
going to resubmit and see if the failures go away, if not I'll
revert again.
llvm-svn: 334355
This reverts commit 10d2e88e87150a35dc367ba30716189d2af26774.
This is causing some test failures for some reason, reverting
while I investigate.
llvm-svn: 334354
This function was internal to Program.inc, but I've needed this
on several occasions when I've had to use CreateProcess without
llvm's sys::Execute functions. In doing so, I noticed that the
function was written using unsafe C-string access and was pretty
hard to understand / make sense of, so I've also re-written the
functions to use more modern LLVM constructs.
llvm-svn: 334353
This is a recommit of r333506, which was reverted in r333518.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 334344
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
It looks like this got left in by accident in r289794; I can't think of
any reason this check would be necessary. (Maybe it was meant to be a
check that the AND has one use? But we check that a few lines earlier.)
Differential Revision: https://reviews.llvm.org/D47921
llvm-svn: 334322
An expression like
(zext i2 {(trunc i32 (1 + %B) to i2),+,1}<%while.body> to i32)
will become zero exactly when the nested value becomes zero in its type.
Strip injective operations from the input value in howFarToZero to make
the value simpler.
Differential Revision: https://reviews.llvm.org/D47951
llvm-svn: 334318
Summary:
If we can use comdats, then we can make it so that the global metadata
is thrown away if the prevailing definition of the global was
uninstrumented. I have only tested this on COFF targets, but in theory,
there is no reason that we cannot also do this for ELF.
This will allow us to re-enable string merging with ASan on Windows,
reducing the binary size cost of ASan on Windows.
Reviewers: eugenis, vitalybuka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47841
llvm-svn: 334313
Extension to D46954 (PR37426), this patch adds support for v8i16/v16i16 rotations in a similar manner - the conversion of the shift/rotate amount to a multiplication factor and the use of PMULLW to shift left and PMULHUW (ISD::MULHU) to shift the wrapped bits back around to be ORd together.
Differential Revision: https://reviews.llvm.org/D47822
llvm-svn: 334309
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed for fsub.
Reviewers: spatel, hfinkel, wristow, arsenm
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D47910
llvm-svn: 334306
This patch moves the recipe-creation functions out of
LoopVectorizationPlanner, which should do the high-level
orchestration of the transformations.
Reviewers: dcaballe, rengolin, hsaito, Ayal
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D47595
llvm-svn: 334305
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), these instructions are dependency breaking and fast-path zero the destination register (and appropriate EFLAGS bits).
llvm-svn: 334303
AMDGPU inline assembler support i16, half and i128 typed variables in constraints, but they were reported as error.
Needed to fix https://github.com/RadeonOpenCompute/ROCm/issues/341,
e.g. to be able to load with global_load_dwordx4 to a 128bit integer variable
Differential Revision: https://reviews.llvm.org/D44920
llvm-svn: 334301
Summary:
`%ret = add nuw i8 %x, C`
From [[ https://llvm.org/docs/LangRef.html#add-instruction | langref ]]:
nuw and nsw stand for “No Unsigned Wrap” and “No Signed Wrap”,
respectively. If the nuw and/or nsw keywords are present,
the result value of the add is a poison value if unsigned
and/or signed overflow, respectively, occurs.
So if `C` is `-1`, `%x` can only be `0`, and the result is always `-1`.
I'm not sure we want to use `KnownBits`/`LVI` here, because there is
exactly one possible value (all bits set, `-1`), so some other pass
should take care of replacing the known-all-ones with constant `-1`.
The `test/Transforms/InstCombine/set-lowbits-mask-canonicalize.ll` change *is* confusing.
What happening is, before this: (omitting `nuw` for simplicity)
1. First, InstCombine D47428/rL334127 folds `shl i32 1, %NBits`) to `shl nuw i32 -1, %NBits`
2. Then, InstSimplify D47883/rL334222 folds `shl nuw i32 -1, %NBits` to `-1`,
3. `-1` is inverted to `0`.
But now:
1. *This* InstSimplify fold `%ret = add nuw i32 %setbit, -1` -> `-1` happens first,
before InstCombine D47428/rL334127 fold could happen.
Thus we now end up with the opposite constant,
and it is all good: https://rise4fun.com/Alive/OA9https://rise4fun.com/Alive/sldC
Was mentioned in D47428 review.
Follow-up for D47883.
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47908
llvm-svn: 334298
Summary:
The function `llvm::sys::commandLineFitsWithinSystemLimits` appears to be overestimating the system limits. This issue was discovered while attempting to enable response files in the Swift compiler. When the compiler submits its frontend jobs, those jobs are subjected to the system limits on command line length. `commandLineFitsWithinSystemLimits` is used to determine if the job's arguments need to be wrapped in a response file. There are some cases where the argument size for the job passes `commandLineFitsWithinSystemLimits`, but actually exceeds the real system limit, and the job fails.
`clang` also uses this function to decide whether or not to wrap it's job arguments in response files. See: https://github.com/llvm-mirror/clang/blob/master/lib/Driver/Driver.cpp#L1341. Clang will also fail for response files who's size falls within a certain range. I wrote a script that should find a failure point for `clang++`. All that is needed to run it is Python 2.7, and a simple "hello world" program for `test.cc`. It should run on Linux and on macOS. The script is available here: https://gist.github.com/dabelknap/71bd083cd06b91c5b3cef6a7f4d3d427. When it hits a failure point, you should see a `clang: error: unable to execute command: posix_spawn failed: Argument list too long`.
The proposed solution is to mirror the behavior of `xargs` in `commandLinefitsWithinSystemLimits`. `xargs` defaults to 128k for the command line length size (See: https://fossies.org/dox/findutils-4.6.0/buildcmd_8c_source.html#l00551). It adjusts this depending on the value of `ARG_MAX`.
Reviewers: alexfh
Reviewed By: alexfh
Subscribers: llvm-commits
Tags: #clang
Patch by Austin Belknap!
Differential Revision: https://reviews.llvm.org/D47795
llvm-svn: 334295
NFC here, this just raises some platform specific ifdef hackery
out of a class and creates proper platform-independent typedefs
for the relevant things. This allows these typedefs to be
reused in other places without having to reinvent this preprocessor
logic.
llvm-svn: 334294
O_CLOEXEC is the right default, but occasionally you don't
want this. This is especially true for tools like debuggers
where you might need to spawn the child process with specific
files already open, but it's occasionally useful in other
scenarios as well, like when you want to do some IPC between
parent and child.
llvm-svn: 334293
Simplify combineVectorTruncationWithPACKUS to mask the upper bits followed by calling truncateVectorWithPACK instead of duplicating with similar code.
This results in the codegen using (V)PACKUSDW on SSE41+ targets for vXi64/vXi32 inputs where before it always used PACKUSWB (along with a lot more bitcasting).
I've raised PR37749 as until we avoid unnecessary concats back to 256-bit for bitwise ops, we can't avoid splitting the input value into 128-bit subvectors for masking.
llvm-svn: 334289
Currently the loop branch heuristic is applied before the invoke heuristic which makes us overestimate the probability of the unwind destination of invokes inside loops. This in turn makes us grossly underestimate the frequencies of loops with invokes.
Reviewed By: skatkov, vsk
Differential Revision: https://reviews.llvm.org/D47371
llvm-svn: 334285
This first step separates VPInstruction-based and VPRecipe-based
VPlan creation, which should make it easier to migrate to VPInstruction
based code-gen step by step.
Reviewers: Ayal, rengolin, dcaballe, hsaito, mkuper, mzolotukhin
Reviewed By: dcaballe
Subscribers: bollu, tschuett, rkruppe, llvm-commits
Differential Revision: https://reviews.llvm.org/D47477
llvm-svn: 334284
The instruction makes use of a previously ignored field in the fence
instruction. It is introduced in the version 2.3 draft of the RISC-V
specification after much work by the Memory Model Task Group.
As clarified here <https://github.com/riscv/riscv-isa-manual/issues/186>,
the fence.tso assembler mnemonic does not have operands.
llvm-svn: 334278
We have some combines/lowerings that attempt to use PACKSS-then-PACKUS and others that use PACKUS-then-PACKSS.
PACKUS is much easier to combine with if we know the upper bits are zero as ComputeKnownBits can easily see through BITCASTs etc. especially now that rL333995 and rL334007 have landed. It also effectively works at byte level which further simplifies shuffle combines.
The only (minor) annoyances are that ComputeKnownBits can sometimes take longer as it doesn't fail as quickly as ComputeNumSignBits (but I'm not seeing any actual regressions in tests) and PACKUSDW only became available after SSE41 so we have more codegen diffs between targets.
llvm-svn: 334276
There could be more than one PHIs in exit block using same loop recurrence.
Don't assume there is only one and fix each user.
Differential Revision: https://reviews.llvm.org/D47788
llvm-svn: 334271
While trying to propagate AND masks back to loads, we currently allow
one non-load node to be included as a leaf in chain. This fix now
limits that node to produce only a single data value.
Differential Revision: https://reviews.llvm.org/D47878
llvm-svn: 334268
The NumControlBits variable was definitely sketchy. I think that only worked because the expected value was 1 or 2 and the number of lanes was 2 or 4. Had their been 8 lanes the number of bits should have been 3 not 4 as the previous code would have given.
llvm-svn: 334258
This one allows much more flexibility than the standard
openFileForRead / openFileForWrite functions. Since there is now
just one "real" function that does the work, all other implementations
simply delegate to this one.
llvm-svn: 334246
Summary: This change uses fmf subflags to guard fma optimizations as well as unsafe. These changes originated from D46483 and have been simplified via getNode.
Reviewers: spatel, arsenm, hfinkel, javed.absar
Reviewed By: spatel
Subscribers: nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47388
llvm-svn: 334242
- Make code easier to maintain.
- Avoid generating waitcnts for VMEM if the address sppace does not involve VMEM.
- Add support to generate waitcnts for LDS and GDS memory.
Differential Revision: https://reviews.llvm.org/D47504
llvm-svn: 334241
Summary:
`%r = shl nuw i8 C, %x`
As per langref:
```
If the nuw keyword is present, then the shift produces
a poison value if it shifts out any non-zero bits.
```
Thus, if the sign bit is set on `C`, then `%x` can only be `0`,
which means that `%r` can only be `C`.
Or in other words, set sign bit means that the signed value
is negative, so the constant is `<= 0`.
https://rise4fun.com/Alive/WMkhttps://rise4fun.com/Alive/udv
Was mentioned in D47428 review.
We already handle the `0` constant, https://godbolt.org/g/UZq1sJ, so this only handles negative constants.
Could use computeKnownBits() / LazyValueInfo,
but the cost-benefit analysis (https://reviews.llvm.org/D47891)
suggests it isn't worth it.
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47883
llvm-svn: 334222
This breaks the OpenFlags enumeration into two separate
enumerations: OpenFlags and CreationDisposition. The first
controls the behavior of the API depending on whether or not
the target file already exists, and is not a flags-based
enum. The second controls more flags-like values.
This yields a more easy to understand API, while also allowing
flags to be passed to the openForRead api, where most of the
values didn't make sense before. This also makes the apis more
testable as it becomes easy to enumerate all the configurations
which make sense, so I've added many new tests to exercise all
the different values.
llvm-svn: 334221
This avoids regressions in a future AMDGPU change
to make v4i16/v4f16 legal. For these types, build_vector
is implemented as bitcasted operations on v2i32. This
combine was creating v4i16s out of what would have been
already been a v2i32 build_vector, creating a mess
of nodes that never get cleaned up.
I'm not sure this is the right condition to check.
I initially tried just checking for the legality of the
new build_vector. This works for my case, but breaks dozens
of x86 tests. A Mips test seems to show some improvement
or at least a neutral change. I don't want to think
about how long it would take to analyze the set of
different x86 vector operations impacted.
Test included in future commit.
llvm-svn: 334218
These weren't included in D19544 - probably just an oversight.
D40044 made it more likely that we'll have LLVM math intrinsics rather
than libcalls, so this bug was more easily exposed.
As the tests/code show, we already have the complete mappings for pow/exp/log.
I don't have any experience with SVML, so I don't know if anything else is
missing. It's also not clear to me that we should be doing this transform in
IR rather than DAG/isel, but that's a separate issue.
Differential Revision: https://reviews.llvm.org/D47610
llvm-svn: 334211
The implementation follows the MIPS backend and expands the pseudo instruction
directly during asm parsing. As the result, only real MC instructions are
emitted to the MCStreamer. The actual expansion to real instructions is
similar to the expansion performed by the GNU Assembler.
This patch supersedes D41949.
Differential Revision: https://reviews.llvm.org/D46118
Patch by Mario Werner.
llvm-svn: 334203
BitPermutationSelector sets Repl32 flag for bit groups which can be (potentially) benefit from 32-bit rotate-and-mask instructions with bit replication, i.e. rlwinm/rlwimi copies lower 32 bits into upper 32 bits on 64-bit PowerPC before rotation.
However, enforcing 32-bit instruction sometimes results in redundant generated code.
For example, the following simple code is compiled into rotldi + rlwimi while it can be compiled into only rldimi instruction if Repl32 flag is not set on the bit group for (a & 0xFFFFFFFF).
uint64_t func(uint64_t a, uint64_t b) {
return (a & 0xFFFFFFFF) | (b << 32) ;
}
To avoid such problem, this patch checks the potential benefit of Repl32 flag before setting it. If a bit group does not require rotation (i.e. RLAmt == 0) and won't be merged into another group, we do not benefit from Repl32 flag on this group.
Differential Revision: https://reviews.llvm.org/D47867
llvm-svn: 334195
isORCopyInst and isReadOrWriteToDSPReg functions were producing warning
that some statements my fall through.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47876
llvm-svn: 334194
Simplify combineVectorTruncationWithPACKSS to just a SIGN_EXTEND_INREG followed by using the existing truncateVectorWithPACK instead of duplicating code.
llvm-svn: 334193
We do the same thing in rewriteSingleStoreAlloca.
Fixes PR37632.
Reviewers: chandlerc, davide, efriedma
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D47825
llvm-svn: 334187
This has two main components. First, widen
widen short constant loads in DAG when they have
the correct alignment. This is already done a bit in
AMDGPUCodeGenPrepare, since that has access to
DivergenceAnalysis. This can't help kernarg loads
created in the DAG. Start to use DAG divergence analysis
to help this case.
The second part is to avoid kernel argument lowering
breaking the alignment of short vector elements because
calling convention lowering wants to split everything
into legal register types.
When loading a split type, load the nearest 4-byte aligned
segment and shift to get the desired bits. This extra
load of the earlier argument piece ends up merging,
and the bit extract hopefully folds out.
There are a number of improvements and regressions with
this, but I think as-is this is a better compromise between
several of the worst parts of SelectionDAG.
Particularly when i16 is legal, this produces worse code
for i8 and i16 element vector kernel arguments. This is
partially due to the very weak load merging the DAG does.
It only looks for fairly specific combines between pairs
of loads which no longer appear. In particular this
causes v4i16 loads to be split into 2 components when
previously the two halves were merged.
Worse, because of the newly introduced shifts, there
is a lot more unnecessary vector packing and unpacking code
emitted. At least some of this is due to reporting
false for isTypeDesirableForOp for i16 as a workaround for
the lack of divergence information in the DAG. The cases
where this happens it doesn't actually matter, but the
relevant code in SimplifyDemandedBits doens't have the context
to know to ignore this.
The use of the scalar cache is probably more important
than the mess of mostly scalar instructions doing this packing
and unpacking. Future work can fix this, possibly by making better
use of the new DAG divergence information for controlling promotion
decisions, or adding another version of shift + trunc + shift
combines that doesn't only know about the used types.
llvm-svn: 334180
Summary: Prevent folding of operations with memory loads when one of the sources has undefined register update.
Reviewers: craig.topper
Subscribers: llvm-commits, mike.dvoretsky, ashlykov
Differential Revision: https://reviews.llvm.org/D47621
llvm-svn: 334175
Summary:
When the branch folder hoist code into a predecessor it adjust live-in's
in the blocks it hoist code from. However it fail to handle hoisted code
that contain a defed register that originally is live-in in the block
through a super register.
This is fixed by replacing the live-in handling code with calls to
utility functions in LivePhysRegs.
Reviewers: kparzysz, gberry, MatzeB, uweigand, aprantl
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47529
llvm-svn: 334163
This is needed to get CC operand in right place, as expected by the
SchedModel.
Review: Ulrich Weigand
https://reviews.llvm.org/D47820
llvm-svn: 334161
When denormals are supported we are producing a full division for
1.0f / x. That still can be replaced by the faster version:
bool c = fabs(x) > 0x1.0p+96f;
float s = c ? 0x1.0p-32f : 1.0f;
x *= s;
return s * v_rcp_f32(x)
in case if requested accuracy is 2.5ulp or less. The same version
is used if denormals are not supported for non 1.0 numerators, where
just v_rcp_f32 is then used for 1.0 numerator.
The optimization of 1/x is extended to the case -1/x, which is the
same except for the resulting sign bit.
OpenCL conformance passed with both enabled and disabled denorms.
Differential Revision: https://reviews.llvm.org/D47805
llvm-svn: 334142
With the upcoming patch to add summary parsing support, IsAnalysis would
be true in contexts where we are not performing module summary analysis.
Rename to the more specific and approprate HaveGVs, which is essentially
what this flag is indicating.
llvm-svn: 334140
The bug report:
https://bugs.llvm.org/show_bug.cgi?id=36036
...requests a DAG change for this, but an IR canonicalization
probably handles most cases. If we still want to match this
pattern in the backend, there's a proposal for that too:
D47831
Alive proofs including nsw/nuw cases that were first noted in:
D46988
https://rise4fun.com/Alive/Kmp
This patch is largely copied from the existing code that was
initially added with:
D40984
...but I didn't see much gain from trying to share code.
llvm-svn: 334137
Fixes terrible code on targets without f16 support. The
legalization creates a mess that is difficult to recover
from. Also should avoid randomly breaking these tests
multiple times in sequence in future commits.
Some regressions in cases where it happens to be better
to pull the source modifier after the conversion.
llvm-svn: 334132
Summary:
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37603 | PR37603 ]].
https://godbolt.org/g/VCMNpShttps://rise4fun.com/Alive/idM
When doing bit manipulations, it is quite common to calculate some bit mask,
and apply it to some value via `and`.
The typical C code looks like:
```
int mask_signed_add(int nbits) {
return (1 << nbits) - 1;
}
```
which is translated into (with `-O3`)
```
define dso_local i32 @mask_signed_add(int)(i32) local_unnamed_addr #0 {
%2 = shl i32 1, %0
%3 = add nsw i32 %2, -1
ret i32 %3
}
```
But there is a second, less readable variant:
```
int mask_signed_xor(int nbits) {
return ~(-(1 << nbits));
}
```
which is translated into (with `-O3`)
```
define dso_local i32 @mask_signed_xor(int)(i32) local_unnamed_addr #0 {
%2 = shl i32 -1, %0
%3 = xor i32 %2, -1
ret i32 %3
}
```
Since we created such a mask, it is quite likely that we will use it in `and` next.
And then we may get rid of `not` op by folding into `andn`.
But now that i have actually looked:
https://godbolt.org/g/VTUDmU
_some_ backend changes will be needed too.
We clearly loose `bzhi` recognition.
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47428
llvm-svn: 334127
Summary:
In D47428, i propose to choose the `~(-(1 << nbits))` as the canonical form of low-bit-mask formation.
As it is seen from these tests, there is a reason for that.
AArch64 currently better handles `~(-(1 << nbits))`, but not the more traditional `(1 << nbits) - 1` (sic!).
The other way around for X86.
It would be much better to canonicalize.
This patch is completely monkey-typing.
I don't really understand how this works :)
I have based it on `// x & (-1 >> (32 - y))` pattern.
Also, when we only have `BMI`, i wonder if we could use `BEXTR` with `start=0` ?
Related links:
https://bugs.llvm.org/show_bug.cgi?id=36419https://bugs.llvm.org/show_bug.cgi?id=37603https://bugs.llvm.org/show_bug.cgi?id=37610https://rise4fun.com/Alive/idM
Reviewers: craig.topper, spatel, RKSimon, javed.absar
Reviewed By: craig.topper
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D47453
llvm-svn: 334125
These encodings correspond to the cases in the normal encoding scheme where there is no index and our modrm reading code initially decodes it as such. The VSIB handling code tried to compensate for this, but failed to add the base needed to make later code do the right thing.
Fixes PR37712.
llvm-svn: 334121
The index size is represented by the letter after the 'v'. The number represents the memory size. If an 'x' appears after the number its means the index register can be from VR128X/VR256X instead of VR128/VR256.
As vy512mem uses a VR256X index it should have an x.
And vz256mem uses a VR512 index so it shouldn't have an x.
I admit these names kind of suck and are confusing.
llvm-svn: 334120
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), all these instructions are dependency breaking and zero the destination register.
llvm-svn: 334119
Summary:
This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
It contains only context for fsqrt.
Reviewers: spatel, hfinkel, arsenm
Reviewed By: spatel
Subscribers: hfinkel, wdng, andrew.w.kaylor, wristow, efriedma, nemanjai
Differential Revision: https://reviews.llvm.org/D47749
llvm-svn: 334113
Make TII isCopyInstr() return MachineOperands through pointer to pointer
instead via reference.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47364
llvm-svn: 334105
If no alignment is set, the abi/preferred alignment of structs will be
used which may be higher than required. This can lead to extra padding
and in the end an increase in data size.
Differential Revision: https://reviews.llvm.org/D47633
llvm-svn: 334099
We should never get different CodeGen based on whether the code is being
compiled in debug mode so we must skip over @llvm.dbg.value (and similar)
calls.
Should fix at least the worst part of PR37690.
llvm-svn: 334090
Only the bottom 16-bits of BEXTR's control op are required (0:8 INDEX, 15:8 LENGTH).
Differential Revision: https://reviews.llvm.org/D47690
llvm-svn: 334083
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Add minimal support to lower function calls.
Support only functions with arguments/return that go through registers
and have type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D45627
llvm-svn: 334071
Fuchsia doesn't use __clear_cache, instead it provide zx_cache_flush
system call. Use it to flush instruction cache.
Differential Revision: https://reviews.llvm.org/D47753
llvm-svn: 334068
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
Summary: As it turns out, the lowering for the Mips16* family of target is the exact same thing as what the ops expands to, so the code handling them can be removed and the ops only enabled for the MipsSE* family of targets.
Reviewers: smaksimovic, atanasyan, abeserminji
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D47703
llvm-svn: 334052
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
This is re-commit of r331783, which was reverted by r333305. The performance regression was caused by some unlucky alignment, not a code generation problem.
llvm-svn: 334049
There was only one place in the entire codebase where a non
default value was being passed, and that place was already hidden
in an implementation file. So we can delete the extra parameter
and all existing clients continue to work as they always have,
while making the interface a bit simpler.
Differential Revision: https://reviews.llvm.org/D47789
llvm-svn: 334046
Preserves the low bound of the !range. I don't think
it's legal to do anything with the top half since it's
theoretically reading garbage.
llvm-svn: 334045
Summary: This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
Reviewers: spatel, hfinkel
Reviewed By: spatel
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D47389
llvm-svn: 334037
Similar to v4i32 SHL, convert v8i16 shift amounts to scale factors instead to improve performance and reduce instruction count. We were already doing this for constant shifts, this adds variable shift support.
Reduces the serial nature of the codegen, which relies on chains of plendvb/pand+pandn+por shifts.
This is a step towards adding support for vXi16 vector rotates.
Differential Revision: https://reviews.llvm.org/D47546
llvm-svn: 334023
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
When legalizing illegal FP load results, this was
for some reason dropping the invariant and dereferencable
memory flags. There doesn't seem to be any reason for this,
and the equivalent isn't done for integer loads.
Fixes an issue in a future AMDGPU commit where some identical
loads fail to merge because one of the loads ends up
dropping the flags.
llvm-svn: 334020
When adjusting a cmp in order to canonicalize an abs/nabs select pattern we need
to use the type of the existing operand when creating a new operand not the
type of a select operand, as the two may be different.
This fixes PR37686.
llvm-svn: 334019
BitPermutationSelector builds the output value by repeating rotate-and-mask instructions with input registers.
Here, we may avoid one rotate instruction if we start building from an input register that does not require rotation.
For example of the test case bitfieldinsert.ll, it first rotates left r4 by 8 bits and then inserts some bits from r5 without rotation.
This can be executed by one rlwimi instruction, which rotates r4 by 8 bits and inserts its bits into r5.
This patch adds a check for rotation amounts in the comparator used in sorting to process the input without rotation first.
Differential Revision: https://reviews.llvm.org/D47765
llvm-svn: 334011
Ideally we'd use resolveTargetShuffleInputs to handle faux shuffles as well but:
(a) that code path doesn't handle general/pre-legalized ops/types very well.
(b) I'm concerned about the compute time as they recurse to calls to computeKnownBits/ComputeNumSignBits which would need depth limiting somehow.
llvm-svn: 334007
Summary:
Bringing some come duplicated in the AT&T and the Intel printers
into a common parent class.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47682
llvm-svn: 334005
When the branch target of a Thumb2 unconditional or conditonal branch is
resolved at assembly time, no range checking is performed on the result
leading to incorrect immediates. This change adds a range check:
+- 16 Megabytes for unconditional branches, +- 1 Megabyte for the
conditional branch.
Differential Revision: https://reviews.llvm.org/D46306
llvm-svn: 333997
The Thumb BL range is + or - either 16 Megabytes or 4 Megabytes depending
on whether the CPU supports Thumb2 or the v8-m baseline ops. The existing
check for BL range is incorrectly set at +- 32 Megabytes. This change
corrects the higher range and uses the lower range if the featurebits
don't have the necessary support for it.
Differential Revision: https://reviews.llvm.org/D46305
llvm-svn: 333991
This is the new version of D46181, allowing setjmp/longjmp
to work correctly with the Intel CET shadow stack by storing
SSP on setjmp and fixing it on longjmp. The patch has been
updated to use the cf-protection-return module flag instead
of HasSHSTK, and the bug that caused D46181 to be reverted
has been fixed with the test expanded to track that fix.
patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D47311
llvm-svn: 333990
Passing -mattr=-mmx needs to disable these instructions since the MMX register class won't have been set up. But we don't want -mattr=-mmx to disable SSE so we have to do it separately.
llvm-svn: 333984
RegAlloc keeps a insertion-time ordered map of evictee information,
but we only use membership. Replace MapVector with contextually
equivalent DenseMap which is smaller and faster.
llvm-svn: 333981
Start by emitting remarks for very basic unsupported cases such as
irreducible CFGs and EHFunclets. The end goal is to be able to cover all
the cases where we give up with an explanation.
llvm-svn: 333972
We already output true and false in the printer, but the parser isn't able to
read it.
Differential Revision: https://reviews.llvm.org/D47424
llvm-svn: 333970
Code review feedback from r328123 prefers copying the few feature test
macros used by Demangle into there, rather than sinking the header into
an odd corner like Demangle.
llvm-svn: 333965
The ELF version was broken (does not deal with wasm specific fixups),
and now is slightly less broken. It will be removed in its entirety
in the future which this change makes slightly easier (just remove
the IsELF bool).
Differential Revision: https://reviews.llvm.org/D47745
Patch by Wouter van Oortmerssen
llvm-svn: 333964
As noted in rL333782, we can be both better for optimization and
safer with this transform:
BinOp (shuffle V1, Mask), C --> shuffle (BinOp V1, NewC), Mask
The only potentially unsafe-to-speculate binops are integer div/rem.
All other binops are always safe (although I don't see a way to
assert that in code here).
For opcodes like shifts that can produce poison, it can't matter
here because we know the lanes with undef are dropped by the
subsequent shuffle.
Differential Revision: https://reviews.llvm.org/D47686
llvm-svn: 333962
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
This is setting up to fix bug 37573 cleanly.
This moves data structures that are technically both used in some way by the
target and the general-purpose outlining algorithm into MachineOutliner.h. In
particular, the `Candidate` class is of importance.
Before, the outliner passed the locations of `Candidates` to the target, which
would then make some decisions about the prospective outlined function. This
change allows us to just pass `Candidates` along to the target. This will allow
the target to discard `Candidates` that would be considered unsafe before cost
calculation. Thus, we will be able to remove the unsafe candidates described in
the bug without resorting to torching the entire prospective function.
Also, as a side-effect, it makes the outliner a bit cleaner.
https://bugs.llvm.org/show_bug.cgi?id=37573
llvm-svn: 333952
Windows' CRT has a limit of 512 open file descriptors, and fds which are
generated by converting a HANDLE via _get_osfhandle count towards this
limit as well.
Regardless, often you find yourself marshalling back and forth between
native HANDLE objects and fds anyway. If we know from the getgo that
we're going to need to work directly with the handle, we can cut out the
marshalling layer while also not contributing to filling up the CRT's
very limited handle table.
On Unix these functions just delegate directly to the existing set of
functions since an fd *is* the native file type. It would be nice, very
long term, if we could convert most uses of fds to file_t.
Differential Revision: https://reviews.llvm.org/D47688
llvm-svn: 333945
Summary: This include variant for add, uaddo and addcarry. usubo and subcarry require the carry to be flipped to preserve semantic, but we chose to do the transform anyway in that case as to push the transform down the carry chain.
Reviewers: efriedma, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46505
llvm-svn: 333943
Summary: It has been deprecated in favor of SETCCCARRY for a year now and isn't used by any in tree backend.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47685
llvm-svn: 333939
entries to reach the target. Since these calls don't require type checks,
we can short-circuit them to their real targets, except in cases when they
can be pre-empted.
Differential Revision: https://reviews.llvm.org/D46326
llvm-svn: 333937
When checking a select to see if it matches an abs, allow the true/false values
to be a sign-extension of the comparison value instead of requiring that they're
directly the comparison value, as all the comparison cares about is the sign of
the value.
This fixes a regression due to r333702, where we were no longer generating ctlz
due to isKnownNonNegative failing to match such a pattern.
Differential Revision: https://reviews.llvm.org/D47631
llvm-svn: 333927
On GFX9 and earlier, flat memory ops may decrement VMCNT out-of-order as well as LGKMCNT out-of-order.
Differential Revision: https://reviews.llvm.org/D46616
llvm-svn: 333926
This patch is the last of a sequence of three patches related to LLVM-dev RFC
"MC support for variant scheduling classes".
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123181.html
This fixes PR36672.
The main goal of this patch is to teach llvm-mca how to solve variant scheduling
classes. This patch does that, plus it adds new variant scheduling classes to
the BtVer2 scheduling model to identify so-called zero-idioms (i.e. so-called
dependency breaking instructions that are known to generate zero, and that are
optimized out in hardware at register renaming stage).
Without the BtVer2 change, this patch would not have had any meaningful tests.
This patch is effectively the union of two changes:
1) a change that teaches llvm-mca how to resolve variant scheduling classes.
2) a change to the BtVer2 scheduling model that allows us to special-case
packed XOR zero-idioms (this partially fixes PR36671).
Differential Revision: https://reviews.llvm.org/D47374
llvm-svn: 333909
Summary:
The new rules are straightforward. The main rules to keep in mind
are:
1. NAME is an implicit template argument of class and multiclass,
and will be substituted by the name of the instantiating def/defm.
2. The name of a def/defm in a multiclass must contain a reference
to NAME. If such a reference is not present, it is automatically
prepended.
And for some additional subtleties, consider these:
3. defm with no name generates a unique name but has no special
behavior otherwise.
4. def with no name generates an anonymous record, whose name is
unique but undefined. In particular, the name won't contain a
reference to NAME.
Keeping rules 1&2 in mind should allow a predictable behavior of
name resolution that is simple to follow.
The old "rules" were rather surprising: sometimes (but not always),
NAME would correspond to the name of the toplevel defm. They were
also plain bonkers when you pushed them to their limits, as the old
version of the TableGen test case shows.
Having NAME correspond to the name of the toplevel defm introduces
"spooky action at a distance" and breaks composability:
refactoring the upper layers of a hierarchy of nested multiclass
instantiations can cause unexpected breakage by changing the value
of NAME at a lower level of the hierarchy. The new rules don't
suffer from this problem.
Some existing .td files have to be adjusted because they ended up
depending on the details of the old implementation.
Change-Id: I694095231565b30f563e6fd0417b41ee01a12589
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm, javed.absar
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47430
llvm-svn: 333900
For immediates used in DUP instructions that have the range
-128 to 127, or a multiple of 256 in the range -32768 to 32512,
one could argue that when the result element size is 16bits (.h),
the value can be considered both signed and unsigned.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47619
llvm-svn: 333873
Print the first indexed element as a FP register, for example:
mov z0.d, z1.d[0]
Is now printed as:
mov z0.d, d1
Next to printing, this patch also adds aliases to parse 'mov z0.d, d1'.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47571
llvm-svn: 333872
Unpredicated copy of indexed SVE element to SVE vector,
along with MOV-aliases.
For example:
dup z0.h, z1.h[0]
duplicates the first 16-bit element from z1 to all elements in
the result vector z0.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47570
llvm-svn: 333871
Predicated copy of floating-point immediate value to SVE vector,
along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: javed.absar
Differential Revision: https://reviews.llvm.org/D47518
llvm-svn: 333869
Predicated copy of possibly shifted immediate value into SVE
vector, along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47517
llvm-svn: 333868
When we optimize select basing on fact that div by 0 is undef
we should not traverse the instruction which are not guaranteed to
transfer execution to next instruction. Guard intrinsic is an example.
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47576
llvm-svn: 333864
Applying synthetic debug info before the bitcode writer pass has no
testing-related purpose. This commit prevents that from happening.
It also adds tests which check that IR produced with/without
-debugify-each enabled is identical after stripping. This makes it
possible to check that individual passes (or full pipelines) are
invariant to debug info.
llvm-svn: 333861
pre-existing SymbolFlags and SymbolToDefinition maps.
This constructor is useful when delegating work from an existing
IRMaterialiaztionUnit to a new one, as it avoids the cost of re-computing these
maps.
llvm-svn: 333852
There's a patchwork of existing transforms trying to handle
these cases, but as seen in the changed test, we weren't
catching them all.
llvm-svn: 333845
Summary: This creates a small perf regression, but after talking with Jacques Pienaar, he was good with it to get things moving toward removng SETCCE.
Reviewers: jpienaar, bryant
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47626
llvm-svn: 333838
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47120
llvm-svn: 333825
Object FIle Representation
At codegen time this is emitted into the ELF file a pair of symbol indices and a weight. In assembly it looks like:
.cg_profile a, b, 32
.cg_profile freq, a, 11
.cg_profile freq, b, 20
When writing an ELF file these are put into a SHT_LLVM_CALL_GRAPH_PROFILE (0x6fff4c02) section as (uint32_t, uint32_t, uint64_t) tuples as (from symbol index, to symbol index, weight).
Differential Revision: https://reviews.llvm.org/D44965
llvm-svn: 333823
As noted in the review thread for rL333782, we could have
made a bug harder to hit if we were simplifying instructions
before trying other folds.
The shuffle transform in question isn't ever a simplification;
it's just a canonicalization. So I've renamed that to make that
clearer.
This is NFCI at this point, but I've regenerated the test file
to show the cosmetic value naming difference of using
instcombine's RAUW vs. the builder.
Possible follow-ups:
1. Move reassociation folds after simplifies too.
2. Refactor common code; we shouldn't have so much repetition.
llvm-svn: 333820
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47121
llvm-svn: 333819
These instructions are unusual in that they operate on 4 consecutive registers so supporting them in codegen will be more difficult than normal.
Includes an assembler check to warn if the source register is not the first register of a 4 register group.
llvm-svn: 333812
Summary:
I noticed this issue because we didn't put the primary cloned loop into
the `NonChildClonedLoops` vector and so never iterated on it. Once
I fixed that, it made it clear why I had to do a really complicated and
unnecesasry dance when updating the loops to remain in canonical form --
I was unwittingly working around the fact that the primary cloned loop
wasn't in the expected list of cloned loops. Doh!
Now that we include it in this vector, we don't need to return it and we
can consolidate the update logic as we correctly have a single place
where it can be handled.
I've just added a test for the iteration order aspect as every time
I changed the update logic partially or incorrectly here, an existing
test failed and caught it so that seems well covered (which is also
evidenced by the extensive working around of this missing update).
Reviewers: asbirlea, sanjoy
Subscribers: mcrosier, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47647
llvm-svn: 333811
and using the latter in DIBuilder::createArtificialType and
DIBuilder::createObjectPointerType methods as well as introducing
mirroring DISubprogram::cloneWithFlags and
DIBuilder::createArtificialSubprogram methods.
The primary goal here is to add createArtificialSubprogram to support
a pass downstream while keeping the method consistent with the
existing ones and making sure we don't encourage changing already
created DI-nodes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D47615
llvm-svn: 333806
Previously we just returned undef, but really we should be returning the pass thru input. We also need to make sure we preserve the chain output that the original intrinsic node had to maintain connectivity in the DAG. So we should just return the incoming chain as the output chain.
llvm-svn: 333804
The idea behind WindowsSupport.h is that it's in the source directory so
that windows.h'isms don't leak out into the larger LLVM project. To that
end, any symbol that references a symbol from windows.h must be in this
private header, and not in a public header.
However, we had some useful utility functions in WindowsSupport.h which
have no dependency on the Windows API, but still only make sense on
Windows. Those functions should be usable outside of Support since there
is no risk of causing a windows.h leak. Although this introduces some
preprocessor logic in some header files, It's not too egregious and it's
better than the alternative of duplicating a ton of code.
Differential Revision: https://reviews.llvm.org/D47662
llvm-svn: 333798
Summary:
Getelementptr returns a vector of pointers, instead of a single address,
when one or more of its arguments is a vector. In such case it is not
possible to simplify the expression by inserting a bitcast of operand(0)
into the destination type, as it will create a bitcast between different
sizes.
Reviewers: majnemer, mkuper, mssimpso, spatel
Reviewed By: spatel
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D46379
llvm-svn: 333783
This bug:
https://bugs.llvm.org/show_bug.cgi?id=37648
...was created with the enhancement to this transform with rL332479.
The urem test shows the disaster potential: any undef divisor lane makes
the whole op undef.
The test diffs show that vector demanded elements turns some of the potential,
but not all, unused binop operands back into undef already.
llvm-svn: 333782
The `MipsAsmParser::loadImmediate` can load immediates of various sizes
into a register. Idea of this change is to use `loadImmediate` in the
`MipsAsmParser::expandMemInst` method to load offset into a register and
then call required load/store instruction.
The patch removes separate `expandLoadInst` and `expandStoreInst`
methods and does everything in the `expandMemInst` method to escape code
duplication.
Differential Revision: https://reviews.llvm.org/D47316
llvm-svn: 333774
Supporting GOT and TLS related relocations by the `.reloc` directive is
useful for purpose of testing various tools like a linker, for example.
llvm-svn: 333773
Summary:
Emit summaries for bitcode modules that are only destined for the
regular LTO portion of the build so they can participate in
summary-based dead stripping.
This change reduces the size of a nacl_helper build with cfi-icall
enabled by 7%, removing the majority of the overhead due to enabling
cfi-icall. The cfi-icall size increase was caused by compiling in lots
of unused code and cfi-icall generating jumptable references to unused
symbols that could no longer be removed by -Wl,-gc-sections. Increasing
the visibility of summary-based dead stripping prevented jumptable
entries being created for unused symbols from the regular LTO portion
of the build.
Reviewers: pcc
Reviewed By: pcc
Subscribers: dschuff, mehdi_amini, inglorion, eraman, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47594
llvm-svn: 333768
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Before we were relying on the any extend of the s1 to s32, but
for AAPCS we need to zero-extend it to at least s8.
Fixes PR36719
Differential Revision: https://reviews.llvm.org/D47425
llvm-svn: 333747
Unpredicated copy of floating-point immediate value into SVE vector,
along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47482
llvm-svn: 333744
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333740
Summary:
Back when we were introducing the DWARF v5 name index, there was a
short discussion whether we shouldn't have a nicer api for iterating
over the index. At that time, I did not find it necessary since the
iteration over names was done only from within the index itself (and I
figured the internal implementation can deal with a slightly rough
interface).
However, now I ran into a use for this kind of API in LLDB (for finding
all names matching a regular expression), so it looked like a nice
opportunity to introduce one. To make the API more useful, I've made the
NameTableEntry class a bit smarter: it now stores the string section
reference (so it can return its name) and its position in the name index
(mainly useful for dumping/logging).
I also convert the internal users to use the new API, which also gives
test coverage for the added code.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47590
llvm-svn: 333738
A 5-bit value can occur when EVEX.X is 0 due to it being used to extend modrm.rm to encode XMM16-31. But if modrm.rm instead encodes a GPR, the Intel documentation says EVEX.X should be ignored so just mask it to 4 bits once we know its a GPR.
llvm-svn: 333725
This was an accidental side effect of EVEX.X being used to encode XMM16-XMM31 using modrm.rm with modrm.mod==0x3.
I think there are still more bugs related to this.
llvm-svn: 333722
Summary:
`getEHScopeMembership()` function is used not only for funclet-based
EHs; they apply to all EH schemes that use the scoped IR
(catchpad/cleanuppad/...). D47005 (rL333045) changed some of the uses of
the term 'funclet' to 'EH scopes' in case they apply to all scoped EH,
and this fixes more of them. For `FuncletLayout` pass, I left it as is
because the pass is only used for funclet-based EH.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47611
llvm-svn: 333711
The WebAssembly committee has decided on the names `memory.size` and
`memory.grow` for the memory intrinsics, so update the LLVM intrinsics to
follow those names, keeping both sets of old names in place for
compatibility.
llvm-svn: 333708
Summary:
This lowers exception catching-related instructions:
1. Lowers `wasm.catch` intrinsic to `catch` instruction
2. Removes `catchpad` and `cleanuppad` instructions; they are not
necessary after isel phase. (`MachineBasicBlock::isEHFuncletEntry()` or
`MachineBasicBlock::isEHPad()` can be used instead.)
3. Lowers `catchret` and `cleanupret` instructions to pseudo `catchret`
and `cleanupret` instructions in isel, which will be replaced with other
instructions in `WebAssemblyExceptionPrepare` pass.
4. Adds 'WebAssemblyExceptionPrepare` pass, which is for running various
transformation for EH. Currently this pass only replaces `catchret` and
`cleanupret` instructions into appropriate wasm instructions to make
this patch successfully run until the end.
Currently this does not handle lowering of intrinsics related to LSDA
info generation (`wasm.landingpad.index` and `wasm.lsda`), because they
cannot be tested without implementing `EHStreamer`'s wasm-specific
handlers. They are marked as TODO, which is needed to make isel pass.
Also this does not generate `try` and `end_try` markers yet, which will
be handled in later patches.
This patch is based on the first wasm EH proposal.
(https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md)
Reviewers: dschuff, majnemer
Subscribers: jfb, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44090
llvm-svn: 333705
Summary:
Loop idiom recognize tries to convert loops like
```
int foo(int x) {
int cnt = 0;
while (x) {
x >>= 1;
++cnt;
}
return cnt;
}
```
into calls to ctlz, but if x is initially negative this loop should be infinite.
It happens that the cases that motivated this change have an absolute value of x before the loop. So this patch restricts the transform to cases where we know x is positive. Note: We are relying on the absolute value of INT_MIN to be undefined so we can assume that the result is always positive.
Fixes PR37479
Reviewers: spatel, hfinkel, efriedma, javed.absar
Reviewed By: efriedma
Subscribers: dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D47348
llvm-svn: 333702
Memory clauses are formed into bundles in presence of xnack.
Their source operands are marked as early-clobber.
This allows to allocate distinct source and destination registers
within a clause and prevent breaking the clause with s_nop in the
hazard recognizer.
Clauses are undone before post-RA scheduler to allow some rescheduling,
which will not break the clause since artificial edges are created in
the dag to keep memory operations together. Yet this allows a better
ILP in some cases.
Differential Revision: https://reviews.llvm.org/D47511
llvm-svn: 333691
This is the planned enhancement to D47163 / rL333611.
We want to match cmp/select sizes because that will be recognized
as min/max more easily and lead to better codegen (especially for
vector types).
As mentioned in D47163, this improves some of the tests that would
also be folded by D46380, so we may want to adjust that patch to
match the new patterns where the extend op occurs after the select.
llvm-svn: 333689
This method returns the set of symbols in the target VSO that have queries
waiting on them. This can be used to make decisions about which symbols to
delegate to another MaterializationUnit (typically this will involve
delegating all symbols that have *not* been requested to another
MaterializationUnit so that materialization of those symbols can be
deferred until they are requested).
llvm-svn: 333684
and make it protected rather than private.
The new name reflects the actual information in the map, and this information
can be useful to derived classes (for example, to quickly look up the IR
definition of a requested symbol).
llvm-svn: 333683
As noted by Adrian on llvm-commits, PrintHTMLEscaped and PrintEscaped in
StringExtras did not conform to the LLVM coding guidelines. This commit
rectifies that.
llvm-svn: 333669
Instead of asserting when using the def_cfa directive with a register
different from fp, fallback on DWARF.
Easily triggered with:
.cfi_def_cfa x1, 32;
rdar://40249694
Differential Revision: https://reviews.llvm.org/D47593
llvm-svn: 333667
Noticed while fixing PR37426, for splat rotations (rotation by an uniform value) its better to just expand back to shift ops than performing as a general non-uniform rotation.
llvm-svn: 333661
Both weakZeroSrcSIV and weakZeroDstSIV are currently giving the same
direction vectors. Fix weakZeroSrcSIVtest by flipping the directions
it gives.
Differential Revision: https://reviews.llvm.org/D46678
llvm-svn: 333658
Summary:
{FLDL2E, FLDL2T, FLDLG2, FLDLN2, FLDPI} were using WriteMicrocoded.
- I've measured the values for Broadwell, Haswell, SandyBridge, Skylake.
- For ZnVer1 and Atom, values were transferred form InstRWs.
- For SLM and BtVer2, I've guessed some values :(
Reviewers: RKSimon, craig.topper, andreadb
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47585
llvm-svn: 333656
This patch extends the MCSchedModel API with new methods that can be used to
obtain the latency and reciprocal througput information for an MCInst.
Scheduling models have recently gained the ability to resolve variant scheduling
classes associated with MCInst objects. Before, models were only able to resolve
a variant scheduling class from a MachineInstr object.
This patch is mainly required by D47374 to avoid regressing a pair of x86
specific -print-schedule tests for btver2. Patch D47374 introduces a new variant
class to teach the btver scheduling model (x86 target) how to correctly compute
the latency profile for some zero-idioms using the new scheduling predicates.
The new methods added by this patch would be mainly used by llc when flag
-print-schedule is specified. In particular, tests that contain inline assembly
require that code is parsed at code emission stage into a sequence of MCInst.
That forces the print-schedule functionality to query the latency/rthroughput
information for MCInst instructions too. If we don't expose this new API, then
we lose "-print-schedule" test coverage as soon as variant scheduling classes
are added to the x86 models.
The tablegen SubtargetEmitter changes teaches how to query latency profile
information using a object that derives from TargetSubtargetInfo. Note that this
should really have been part of r333286. To avoid code duplication, the logic
that "resolves" variant scheduling classes for MCInst, has been moved to a
common place in MC. That logic is used by the "resolveVariantSchedClass" methods
redefined in override by the tablegen'd GenSubtargetInfo classes.
Differential Revision: https://reviews.llvm.org/D47536
llvm-svn: 333650
- Make eraseMetadata return whether it changed something
- Wire getMetadata for a single MDNode efficiently into the attachment
map
- Add hasMetadata, which is less weird than checking getMetadata ==
nullptr on a multimap.
Use it to simplify code.
llvm-svn: 333649
Convert a vector load intrinsic into an llvm load instruction.
This is beneficial when the underlying object being addressed
comes from a constant, since we get constant-folding for free.
Differential Revision: https://reviews.llvm.org/D46273
llvm-svn: 333643
Summary:
- I've measured the values for Broadwell, Haswell, SandyBridge, Skylake.
- For ZnVer1 and Atom, values were transferred form `InstRW`s.
- For SLM and BtVer2, values are from Agner.
This is split off from https://reviews.llvm.org/D47377
Reviewers: RKSimon, andreadb
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47523
llvm-svn: 333642
This improves splat rotations (rotation by an uniform value), to avoid having to use the generic non-uniform shift code (extension to PR37426).
llvm-svn: 333641
Summary:
Both (Apple and DWARF5) implementations of the iterators had bugs which
resulted in crashes if one attempted to iterate through the accelerator
tables all the way.
For the Apple tables, the issue was that we did not clear the DataOffset
field when we reached the end, which made our iterator compare unequal
to the "end" iterator. For the Dwarf5 tables, the problem was that we
incremented the CurrentIndex pointer and then used the incremented
(possibly invalid) pointer to check whether we have reached the end of
the index list.
The reason these bugs went undetected is because their only user
(dwarfdump) only ever searched for the first match. Besides allowing us
to test this fix, changing llvm-dwarfdump --find to display all matches
seems like a good improvement (it makes the behavior consistent with the
--name option), so I change llvm-dwarfdump to do that.
The existing tests would be sufficient to test this fix with the new
llvm-dwarfdump behavior, but I add a special test that demonstrates that
the tool indeed displays multiple results. The find.test test needed to
be tweaked a bit as the tool now does not print the ".debug_info
contents" header (also consistent with how --name works).
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D47543
llvm-svn: 333635
In post-commit review, Eric Christopher notes that many
new MSan warnings are being observed with this patch.
The probable reason is: if 'y' is undef here and we could
evaluate it twice and get different results.
We can't increase the number of uses of a value.
llvm-svn: 333631
Keep track of achieved occupancy in SIMachineFunctionInfo.
At the moment we have a lot of duplicated or even missed code to
query and maintain occupancy info. Record it in the MFI and
query in a single call. Interfaces:
- getOccupancy() - returns current recorded achieved occupancy.
- getMinAllowedOccupancy() - returns lesser of the achieved occupancy
and the lowest occupancy we are ready to tolerate. For example if
a kernel is memory bound we are ready to tolerate 4 waves.
- limitOccupancy() - record occupancy level if we have to lower it.
- increaseOccupancy() - record occupancy if scheduler managed to
increase the occupancy.
MFI takes care of integrating different checks affecting occupancy,
including LDS use and waves-per-eu attribute. Note that scheduler
starts with not yet known register pressure, so has to record either
limit or increase in occupancy after it is done. Later passes can
just query a resulting value.
New interface is used in the active scheduler and NFC wrt its work.
Changes are also made to experimental schedulers to use it and record
an occupancy after they are done. Before the change waves-per-eu was
ignored by experimental schedulers and tolerance window for memory
bound kernels was not used.
Differential Revision: https://reviews.llvm.org/D47509
llvm-svn: 333629
v2: use "ensureAlignment"
make functions cache line aligned
Fixes GPU hangs since r333219:
"AMDGPU: Split R600 AsmPrinter code into its own class"
Differential Revision: https://reviews.llvm.org/D47516
llvm-svn: 333622
Don't always:
cast (select (cmp x, y), z, C) --> select (cmp x, y), (cast z), C'
This is something that came up as far back as D26556, and I lost track of it.
I suspect that this transform is part of the underlying problem that is
inspiring some of the recent proposals that seek to match larger patterns
that include a cast op. Even if that's not true, this transform causes
problems for codegen (particularly with vector types).
A transform to actively match the size of cmp and select operand sizes should
follow. This patch just removes the harmful canonicalization in the other
direction.
Differential Revision: https://reviews.llvm.org/D47163
llvm-svn: 333611
Summary:
Fix PR37625. It's possible for an extern_weak declaration to be emitted
to the merged module when a definition exists in the ThinLTO portion of
the build; discard the linkage on the declaration in that case.
(otherwise we copy the linkage to the alias to the jumptable and fail)
Reviewers: pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47494
llvm-svn: 333604
Looks like we intended to compare this->Members with Other->Members
here, but ended up comparing this->Members with this->Members. Oops. :)
Since CongruenceClass::Members is a SmallPtrSet anyway, we can probably
skip building std::sets if we're willing to write a bit more code.
This appears to be no functional change (for sufficiently lax values of
"no"): this equality check was only being called inside of an assert.
So, worst case, we'll catch more bugs in the form of assertion failures.
Thanks to d0k for noting this!
llvm-svn: 333601
This is to make it clear what kind of bugs the LegalizerInfo::verifier
is able to catch and test its output
Reviewers: aemerson, qcolombet
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D46338
llvm-svn: 333597
Summary:
Creating the IRBuilder methods:
CreateElementUnorderedAtomicMemSet
CreateElementUnorderedAtomicMemMove
These mirror the methods that create calls to the regular (non-atomic) memmove and
memset intrinsics.
llvm-svn: 333588
The set properties are never used, so a vector is enough. No
functionality change intended.
While there add some std::moves to SparseSolver.
llvm-svn: 333582
Created the IsSplatValue helper from the splat detection code in LowerScalarVariableShift as a first NFC step towards improving support for splat rotations, which is an extension of PR37426.
llvm-svn: 333580
This commit adds a simple verifier that tracks type indices being
touched by legalization rules' builders.
Every target will now have an opportunity to call
LegalizerInfo::verify(...) at the end of its derived LegalizerInfo's
constructor and check there are no obvious mistakes like checking only
first type for an opcode that has more than one type index and therefore
implicitly declaring any type for the second (and higher) type index
legal.
The check is only ran in assert builds and should have very minor
performance impact in assert builds and none in release builds.
This commit does not add LegalizerInfo::verify(...) calls to
target-specific legalizers, look for separate commits for that.
This commit also doesn't make the verification errors fatal, only
produces an error message, look for a later commit that does.
Reviewers: aemerson, qcolombet
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D46338
llvm-svn: 333576
When printing string in the Plist, we weren't escaping the characters
which lead to invalid XML. This patch adds the escape logic to
StringExtras.
rdar://39785334
llvm-svn: 333565
This was just emitting loads with the ABI alignment
for the raw type. The true alignment is often better,
especially when an illegal vector type was scalarized.
The better alignment allows using a scalar load
more often.
llvm-svn: 333558
Summary:
The isKnownNonZero() function have checks that abort the recursion when
it reaches the specified max depth. However one of the recursive calls
was placed before the max depth check was done, resulting in a endless
recursion that eventually triggered a segmentation fault.
Fixed the problem by moving the max depth check above the first
recursive call.
Reviewers: Prazek, nlopes, spatel, craig.topper, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D47531
llvm-svn: 333557
In terms of waitcnt insertion/if necessary, the waitcnt pass forces convergence
for a loop. Previously, that kicked if greater than 2 passes over a loop, which
doesn't account for loop with many bottom blocks. So, increase the threshold to
(n+1), where n is the number of bottom blocks. This gives the pass an
opportunity to consider the contribution of each bottom block, to the overall
loop, before the forced convergence potentially kicks in.
Differential Revision: https://reviews.llvm.org/D47488
llvm-svn: 333556
Support for Clang lowering of fused intrinsics. This patch:
1. Removes bindings to clang fma intrinsics.
2. Introduces new LLVM unmasked intrinsics with rounding mode:
int_x86_avx512_vfmadd_pd_512
int_x86_avx512_vfmadd_ps_512
int_x86_avx512_vfmaddsub_pd_512
int_x86_avx512_vfmaddsub_ps_512
supported with a new intrinsic type (INTR_TYPE_3OP_RM).
3. Introduces new x86 fmaddsub/fmsubadd folding.
4. Introduces new tests for code emitted by sequentions introduced in Clang part.
Patch by tkrupa
Reviewers: craig.topper, sroland, spatel, RKSimon
Reviewed By: craig.topper, RKSimon
Differential Revision: https://reviews.llvm.org/D47443
llvm-svn: 333554
Summary:
The atomic variants of the memcpy/memmove/memset intrinsics can be treated
the same was as the regular forms, with respect to aliasing. Update the
AliasSetTracker to treat the atomic forms the same was as the regular forms.
llvm-svn: 333551
Turning a table lookup intrinsic into a shuffle vector instruction
can be beneficial. If the mask used for the lookup is the constant
vector {7,6,5,4,3,2,1,0}, then the back-end generates byte reverse
instructions instead.
Differential Revision: https://reviews.llvm.org/D46133
llvm-svn: 333550
Summary: This code is now dead as the ARM backend uses ADDCARRY/SUBCARRY/SETCCCARRY .
Reviewers: rogfer01, efriedma, rengolin, javed.absar
Subscribers: kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D47413
llvm-svn: 333544
Previously PredicateControl in some cases was a member of <X>Inst classes
for some X (DSP, EVA) or was in more irregular place in the hierarchry
for any given instruction.
This patch moves PredicateControl down to the root so that it is consistently
available. Then correct the base class of microMIPS instructions as using
EncodingPredicates instead of the general Predicates field of Instruction.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D47526
llvm-svn: 333536
As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
Floating point immediate combining a negative sign and
a hexadecimal number, e.g. #-0x0 caused the compiler to crash.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: javed.absar
Differential Revision: https://reviews.llvm.org/D47483
llvm-svn: 333524
They get type Other when used in the clobber list in inline assembly.
This fixes tests fp128.ll and float.ll that failed after r333512.
llvm-svn: 333523
Summary: The fX version of floating-point registers only supports
single precision. We need to map the name to dX for doubles and qX
for long doubles if we want getRegForInlineAsmConstraint() to be
able to pick the correct register class.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47258
llvm-svn: 333512
This is a recommit of r333390, which was reverted in r333395, because it
caused cyclic dependency when building shared library `LLVMDemangle.so`.
In this commit `ItaniumDemangler.cpp` was not changed.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333506
The relocation for branch instructions in the dynamic loader of ExecutionEngine assumes branch instructions with R_PPC64_REL24 relocation type are only bl. However, with the tail call optimization, b instructions can be also used to jump into another function.
This patch makes the relocation to keep bits in the branch instruction other than the jump offset to avoid relocation rewrites a b instruction into bl.
Differential Revision: https://reviews.llvm.org/D47456
llvm-svn: 333502
loop-cleanup passes at the beginning of the loop pass pipeline, and
re-enqueue loops after even trivial unswitching.
This will allow us to much more consistently avoid simplifying code
while doing trivial unswitching. I've also added a test case that
specifically shows effective iteration using this technique.
I've unconditionally updated the new PM as that is always using the
SimpleLoopUnswitch pass, and I've made the pipeline changes for the old
PM conditional on using this new unswitch pass. I added a bunch of
comments to the loop pass pipeline in the old PM to make it more clear
what is going on when reviewing.
Hopefully this will unblock doing *partial* unswitching instead of just
full unswitching.
Differential Revision: https://reviews.llvm.org/D47408
llvm-svn: 333493
Previously JITCompileCallbackManager only supported single threaded code. This
patch embeds a VSO (see include/llvm/ExecutionEngine/Orc/Core.h) in the callback
manager. The VSO ensures that the compile callback is only executed once and that
the resulting address cached for use by subsequent re-entries.
llvm-svn: 333490
Resolving fixup_riscv_call by assembler when the linker relaxation diabled
and the function and callsite within the same compile unit.
And also adding static_assert after Infos array declaration
to avoid missing any new fixup in MCFixupKindInfo in the future.
Differential Revision: https://reviews.llvm.org/D47126
llvm-svn: 333487
Minor replacement. LLVM_ATTRIBUTE_USED was introduced to silence
a warning but using #ifndef NDEBUG makes more sense in this case.
Reviewers: dblaikie, fhahn, hsaito
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47498
llvm-svn: 333476
We only need the extractelt that corresponds to the register we're trying to insert back into. We can't guarantee the others haven't been optimized out depending on how those operands were produced.
So instead just look for an FR32/FR64 input and emit a COPY_TO_REGCLASS to VR128 in the output pattern. This matches what we do for ADD/SUB/MUL/DIV.
llvm-svn: 333473
be both simpler and substantially more efficient.
Rather than use a hand-rolled iteration technique that isn't quite the
same as RPO, use the pre-built RPO loop body traversal utility.
Once visiting the loop body in RPO, we can assert that we visit defs
before uses reliably. When this is the case, the only need to iterate is
when simplifying a def that is used by a PHI node along a back-edge.
With this patch, the first pass over the loop body is just a complete
simplification of every instruction across the loop body. When we
encounter a use of a simplified instruction that stems from a PHI node
in the loop body that has already been visited (due to some cyclic CFG,
potentially the loop itself, or a nested loop, or unstructured control
flow), we recall that specific PHI node for the second iteration.
Nothing else needs to be preserved from iteration to iteration.
On the second and later iterations, only instructions known to have
simplified inputs are considered, each time starting from a set of PHIs
that had simplified inputs along the backedges.
Dead instructions are collected along the way, but deleted in a batch at
the end of each iteration making the iterations themselves substantially
simpler. This uses a new batch API for recursively deleting dead
instructions.
This alsa changes the routine to visit subloops. Because simplification
is fundamentally transitive, we may need to visit the entire loop body,
including subloops, to handle knock-on simplification.
I've added a basic test file that helps demonstrate that all of these
changes work. It includes both straight-forward loops with
simplifications as well as interesting PHI-structures, CFG-structures,
and a nested loop case.
Differential Revision: https://reviews.llvm.org/D47407
llvm-svn: 333461
AFAIK the driver's allocation will actually have to round this
up anyway. It is useful to track the rounded up size, so that
the end of the kernel segment is known to be dereferencable so
a wider s_load_dword can be used for a short argument at the end
of the segment.
llvm-svn: 333456
Summary:
Base and offset are always separated when a GlobalAddress node is lowered
(rL332641) as an optimization to reduce instruction count. However, this
optimization is not profitable if the Global Address ends up being used in only
instruction.
This patch adds peephole optimizations that merge an offset of
an address calculation into the LUI %%hi and ADD %lo of the lowering sequence.
The peephole handles three patterns:
1) ADDI (ADDI (LUI %hi(global)) %lo(global)), offset
--->
ADDI (LUI %hi(global + offset)) %lo(global + offset).
This generates:
lui a0, hi (global + offset)
add a0, a0, lo (global + offset)
Instead of
lui a0, hi (global)
addi a0, hi (global)
addi a0, offset
This pattern is for cases when the offset is small enough to fit in the
immediate filed of ADDI (less than 12 bits).
2) ADD ((ADDI (LUI %hi(global)) %lo(global)), (LUI hi_offset))
--->
offset = hi_offset << 12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a0, hi(global + offset)
addi a0, lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offset)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI but the lower 12 bits are all zeros.
3) ADD ((ADDI (LUI %hi(global)) %lo(global)), (ADDI lo_offset, (LUI hi_offset)))
--->
offset = global + offhi20<<12 + offlo12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a1, %hi(global + offset)
addi a1, %lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offhi20)
addi a1, (offlo12)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI and both the lower 1 bits and high 20 bits are non zero.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos,
niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
llvm-svn: 333455
Summary:
A simple change to derive mod/ref info from the atomic memcpy
intrinsic in the same way as from the regular memcpy intrinsic.
llvm-svn: 333454
We've had Thumb1 support for ARMISD::SUBE for a while now, so this just
works. Reduces codesize a bit for 64-bit integer comparisons.
Differential Revision: https://reviews.llvm.org/D47387
llvm-svn: 333445
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
llvm-svn: 333440
As suggested in https://bugs.llvm.org/show_bug.cgi?id=32384#c1, this change
makes the inlining of `memset()` and `memcpy()` more aggressive when
compiling for speed. The tuning remains the same when optimizing for size.
Patch by: Sebastian Pop <s.pop@samsung.com>
Evandro Menezes <e.menezes@samsung.com>
Differential revision: https://reviews.llvm.org/D45098
llvm-svn: 333429
Now LLVM assembler cannot process the following code and generates an
error. GNU tools support .set assignment directive with numeric register
name.
```
.set r4, 4
test.s:1:11: error: invalid token in expression
.set r4, $4
^
```
This patch teach assembler to handle such directives correctly.
Unfortunately a numeric register name cannot be represented as an
expression. That's why we have to maintain a separate `StringMap`
in the `MipsAsmParser` to keep mapping between aliases names and
register numbers.
Differential revision: https://reviews.llvm.org/D47464
llvm-svn: 333428
1. Introduction of mask scalar TableGen patterns.
2. Introduction of new scalar move TableGen patterns
and refactoring of existing ones.
3. Folding of pattern created by introducing scalar
masking in Clang header files.
Patch by tkrupa
Differential Revision: https://reviews.llvm.org/D47012
llvm-svn: 333419
Summary:
Avoid assert/crash during liveness calculation in situations
where the incoming machine function has statically unreachable BBs.
Second attempt at submitting; this version of the change includes
a revised testcase.
Fixes PR37130.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47372
llvm-svn: 333416
Instruction selection can insert nodes into the underlying list after the root
node so iterating will thereby miss it. We should NOT assume that, the root node
is the last element in the DAG nodelist.
Patch by: steven.zhang (Qing Shan Zhang)
Differential Revision: https://reviews.llvm.org/D47437
llvm-svn: 333415
This patch addresses the following variants:
- bitmask immediate, e.g. 'and z0.d, z0.d, #0x6'.
- unpredicated data vectors, e.g. 'and z0.d, z1.d, z2.d'.
- predicated data vectors, e.g. 'and z0.d, p0/m, z0.d, z1.d'.
And also several aliases, such as:
- ORN, alias of ORR.
- EON, alias of EOR.
- BIC, alias of AND (immediate variant)
- MOV, alias of ORR (if unpredicated and source register operands are the same)
Reviewers: rengolin, huntergr, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47363
llvm-svn: 333414
Emit R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_LO16 and
R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_HI16 chains of
relocations for %lo(%neg(%gp_rel())) and %hi(%neg(%gp_rel()))
expressions in case of microMIPS.
Differential Revision: http://reviews.llvm.org/D47220
llvm-svn: 333409
This patch adds addsub_imm8_opt_lsl_(i8|i16|i32|i64) operands
that are unsigned values in the range 0 to 255. For element widths of
16 bits or higher it may also be a signed multiple of 256 in the
range 0 to 65280.
Note: This also does some refactoring to reuse convenience function
getShiftedVal<shift>(), and now allows AArch64 scalar 'ADD #-4096' to be
accepted to be mapped to SUB #4096.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47310
llvm-svn: 333408
Emit R_MICROMIPS_HIGHER / R_MICROMIPS_HIGHEST relocations for %higher()
and %highest() expressions in case of microMIPS. These relocations do
exactly the same things as R_MIPS_HIGHER / R_MIPS_HIGHEST, but for
consistency it's better to write microMIPS variants.
Differential Revision: http://reviews.llvm.org/D47219
llvm-svn: 333407
Previously, their listed predicates were overridden at the scope level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46947
llvm-svn: 333405
Before this fix the following code triggers two error messages. The
second one is at least useless:
test.s:1:9: error: expected identifier after .set
.set 123, $a0
^
test-set.s:1:9: error: unexpected token, expected comma
.set 123, $a0
^
llvm-svn: 333402
Summary: We already get this right if the i64 didn't come from a load.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47439
llvm-svn: 333393
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333390
We have unmasked intrinsics now and wrap them with a select. This is a net reduction of 36 intrinsics from before the unmasked intrinsics were added.
llvm-svn: 333388
This will allow us to remove the 3 different flavors of masked intrinsics. I'm leaving the actual intrinsic removal for another patch.
llvm-svn: 333386
These do the same thing with the first and second sources swapped. They previously came from separate intrinsics that specified different masking behavior. But we can cover that with isel patterns and a single node.
This is a step towards reducing the number of intrinsics needed.
A bunch of tests change because we are now biased to choosing VPERMT over VPERMI when there is nothing to signal that commuting is beneficial.
llvm-svn: 333383
Summary: It was fully replaced back in 2014, and the implementation was removed 11 months ago by r306797.
Reviewers: hfinkel, chandlerc, whitequark, deadalnix
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47436
llvm-svn: 333378
Implemente patterns to extract HWord and Byte vector elements and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46774
llvm-svn: 333377
The X-form TLS load/store instructions added for optimizing the initial-exec
sequence in https://reviews.llvm.org/rL327635 fail to assemble. llvm-mc fails
with the error: invalid operand for instruction. This patch adds these
instructions into a block with isAsmParserOnly, similar to how ADD8TLS_ is
currently handled.
Differential Revision: https://reviews.llvm.org/D47382
llvm-svn: 333374
Summary:
Adding these makes it easier to assemble the output from GCC which
generates a lot of .uahalf and .uaword directives.
GAS treats .uahalf and .half the same unless the --enforce-aligned-data
flag is used. I could not find a similar flag for LLVM so it seems that
.half does not have any alignment requirement and is treated the same as
.uahalf should be. If that would change later on then the tests in
sparc-directives.s would fail due to bad alignment.
Reviewers: jyknight, asb
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47319
llvm-svn: 333372
This basically reverts r280696 in favor of using extra patterns as mentioned as an alternative in that commit message. For now I've only added the cases we have test cases for, but it should be easy to add more in the future.
This will help to convert VPERMI2PS/VPERMT2PS intrinsics to use a single ISD node opcode. And hopefully allow some intrinsics to be removed.
llvm-svn: 333365
Summary:
For a block with WQM on entry and exit and containing no exact mode
code, but containing some WWM code, the WQM pass forgot to process the
block at all and so did not insert code to enter and leave WWM.
This commit fixes that.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47027
Change-Id: I044792eead1293bed4203fb26ce75f47878afeb6
llvm-svn: 333362
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 333358
The argument was used as an additional negative condition and can be
expressed in the if conditional without needing to pass it down.
Update bss commentary around main use.
llvm-svn: 333357
When requesting to dump both the parent chain and children, we used to
print the DIE more than once because we propagated the dump options to
the parent without clearing the respective flags. This commit fixes this
oversight and adds a test.
rdar://39415292
Differential revision: https://reviews.llvm.org/D47263
llvm-svn: 333350
Summary:
Implements AsmWriter support for printing the module summary index to
assembly with the format discussed in the RFC "LLVM Assembly format for
ThinLTO Summary".
Implements just enough of the parsing support to recognize and ignore
the summary entries. As agreed in the RFC thread, this will be the
behavior when assembling the IR. A follow on change will implement
parsing/assembling of the summary entries for use by tools that
currently build the summary index from bitcode.
Reviewers: dexonsmith, pcc
Subscribers: inglorion, eraman, steven_wu, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D46699
llvm-svn: 333335
Style guide says `else`s after returns are iffy, and I agree. I also
don't know what broke the comments here and in CFLAA, but *shrug*.
llvm-svn: 333332
Reverting this to see if this is causing the failures of the
clang-with-thin-lto-ubuntu bot.
[IPSCCP] Use PredicateInfo to propagate facts from cmp instructions.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333323
The uint64_ts that we pass around AA to represent MemoryLocation sizes
are logically an Optional<uint64_t>. In D44748, we want to add an extra
'imprecise' bit to this Optional<uint64_t> to represent whether a given
MemoryLocation size is an upper-bound or an exact size. For more context
on why, please see D44748.
That patch is quite large, but reviewers seem to be OK with the
approach. In D45581 (my first attempt to split 'noise' out of D44748),
reames asked that I land a precursor that is solely replacing uint64_t
with LocationSize, which starts out as `using LocationSize = uint64_t;`.
He also gave me the OK to submit this rename without further review.
llvm-svn: 333314
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D47153
llvm-svn: 333307
With the removal of the old waitcnt pass, the '-enable-si-insert-waitcnts' option is obsolete. Remove it.
Differential Revision: https://reviews.llvm.org/D47378
llvm-svn: 333303
Libfuzzer tests have been fixed to prevent being optimized.
Original commit message:
If the nsw flag is used in the absolute value then it is undefined for INT_MIN. For all other value it will produce a positive number. So we can assume the result is positive.
This breaks some InstCombine abs/nabs combining tests because we simplify the second compare from known bits rather than as the whole pattern. Looks like we can probably fix it by adding a neg+abs/nabs combine to just swap the select operands. N
Differential Revision: https://reviews.llvm.org/D47041
llvm-svn: 333300
This is adoption of HSAIL perfhint pass. Two types of hints are produced:
1. Function is memory bound.
2. Kernel can use wave limiter.
Currently these hints are used in the scheduler. If a function is suspected
to be memory bound we allow occupancy to decrease to 4 waves in the course
of scheduling.
Differential Revision: https://reviews.llvm.org/D46992
llvm-svn: 333289
Rather than using a regpair operand of these instructions, use two seperate
operands and a custom converter to handle the implicit second register operand.
Additionally, remove the microMIPS32R6 definition as its redundant.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47255
llvm-svn: 333288
This restructuring was suggested in the review for D46699, which
prepares the linkage type printer for use in printing the ThinLTO
summary index (where we want to print "external" and also don't
want a space after the linkage type as it is printed by the caller).
llvm-svn: 333281
When the shuffle mask selected a subvector of the second input vector,
and aligning of the source was performed, the shuffle mask was updated
incorrectly, resulting in an ICE further in the selection process.
llvm-svn: 333279
Summary:
Look past debug intrinsics when querying whether an instruction is the
first instruction in the header block. The commit includes a reproducer
for a case where LICM would not hoist an instruction, due to the presence
of the intrinsic.
A caveat with this commit is that the check will not work properly if
the instruction at hand is a debug intrinsic. I assume that no one
depends on isGuaranteedToExecute() to return true for debug intrinsics
for these cases (and that this might be an indication of another debug
invariant issue), so I thought that it was not worth adding that extra
bit of complexity.
Reviewers: reames, anna
Reviewed By: anna
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47197
llvm-svn: 333274
As confirmed by llvm-exegesis, there is no scheduler difference between MOVDQA/MOVDQU and VMOVDQA/VMOVDQU xmm reg-reg moves
Another chapter in the never ending crusade to remove useless InstRW overrides from the x86 scheduler models......
llvm-svn: 333271
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333268
Unpredicated copy of optionally-shifted immediate to SVE vector,
along with MOV-aliases.
This patch contains parsing and printing support for
cpy_imm8_opt_lsl_(i8|i16|i32|i64). This operand allows a signed value in
the range -128 to +127. For element widths of 16 bits or higher it may
also be a signed multiple of 256 in the range -32768 to +32512.
For element-width of 8 bits a range of -128 to 255 is accepted, since a copy
of a byte can be considered either signed/unsigned.
Note: This patch renames tryParseAddSubImm() -> tryParseImmWithOptionalShift()
and moves the behaviour of trying to shift a plain immediate by an allowed
shift-value to its addImmWithOptionalShiftOperands() method, so that the
parsing itself is generic and allows immediates from multiple shifted operands.
This is done because an immediate can be divisible by both shifted operands.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47309
llvm-svn: 333263
Previously, this pass would look at the (static) set returned by
getCallPreservedMask() and add those back as preserved in the case when
isSafeForNoCSROpt() returns false.
A problem is that a target may have to save some registers even when NoCSROpt
takes place. For instance, on SystemZ, the return register is needed upon
return from a function.
Furthermore, getCallPreservedMask() only includes the registers that the
target actually wishes to emit save/restore instructions for. This means that
subregs and (fully saved) superregs are missing.
This patch instead takes the (dynamic) set returned by target for the
function from determineCalleeSaves() and then adds sub/super regs to build
the set to be used when building the RegMask for the function.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D46315
llvm-svn: 333261
Summary:
Lower control flow did not correctly handle the case that a loop break
in if/else was on a condition that was not guaranteed to be masked by
exec. The first test kernel shows an example of this going wrong; after
exiting the loop, exec is all ones, even if it was not before the loop.
The fix is for lowering of if-break and else-break to insert an
S_AND_B64 to mask the break condition with exec. This commit also
includes the optimization of not inserting that S_AND_B64 if it is
obviously not needed because the break condition is the result of a
V_CMP in the same basic block.
V2: Addressed some review comments.
V3: Test fixes.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44046
Change-Id: I0fc56a01209a9e99d1d5c9b0ffd16f111caf200c
llvm-svn: 333258
Re-add the feature flag for invpcid, which was removed in r294561.
Add an intrinsic, which always uses a 32 bit integer as first argument,
while the instruction actually uses a 64 bit register in 64 bit mode
for the INVPCID_TYPE argument.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47141
llvm-svn: 333255
Summary:
The AMDGPUMCInstLower class is not used outside AMDGPUMCInstLower.cpp,
so we don't need a header file.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47264
llvm-svn: 333254
The plan had always been to move towards using this rather than so much
in-pass simplification within the loop pipeline, but we never got around
to it.... until only a couple months after it was removed due to disuse.
=/
This commit is just a pure revert of the removal. I will add tests and
do some basic cleanup in follow-up commits. Then I'll wire it into the
loop pass pipeline.
Differential Revision: https://reviews.llvm.org/D47353
llvm-svn: 333250
When a GEP with all zero indices is converted to bitcast, its DI wasn't
copied over to the newly created instruction. This patch fixes that bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47347
llvm-svn: 333235
Currently the iteration order of OnTheFlyManagers is not deterministic
between executions, which means some of test/Other/opt-*-pipeline.ll
tests fail non-deterministically if an additional on-the-fly manager is
added, as in D45330.
By using MapVector, we always iterate in the insertion order. As we are
not removing elements, there shouldn't be a performance hit, except that
we store an additional vector with the keys.
Reviewers: efriedma, chandlerc, pcc, jhenderson
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47317
llvm-svn: 333231
Currently RTDyldObjectLinkingLayer makes it hard to support
JITEventListeners. Which in turn means debugging and profiling JIT
generated code hard.
Supporting JITEventListeners at minimum requries a freed
callback (added).
As listeners expect the ObjectFile to be passed as well, an adaptor
between RTDyldObjectLinkingLayer and JITEventListeners would currently
need to also maintain ObjectFiles for all loaded modules. To make that
less awkward, extend the callbacks to pass the ObjectFile to both
Finalized and Freed callbacks. That requires extending the lifetime
of the object file when callbacks are present.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D44890
llvm-svn: 333227
If the nsw flag is used in the absolute value then it is undefined for INT_MIN. For all other value it will produce a positive number. So we can assume the result is positive.
This breaks some InstCombine abs/nabs combining tests because we simplify the second compare from known bits rather than as the whole pattern. Looks like we can probably fix it by adding a neg+abs/nabs combine to just swap the select operands. Need to check alive to make sure there are no corner cases.
Differential Revision: https://reviews.llvm.org/D47041
llvm-svn: 333226
Reassociation of math ops in some contexts (especially vector contexts)
has generally only been happening when the 'fast' FMF was set. This
enables reassoication when only the finer grained controls 'reassoc' and
'nsz' are set.
Differential Revision: https://reviews.llvm.org/D47335
llvm-svn: 333221
The existing code has three different ways to try to lower a 64-bit
immediate to the sequence ORR+MOVK. The result is messy: it misses
some possible sequences, and the order of the checks means we sometimes
emit two MOVKs when we only need one.
Instead, just use a simple loop to try all possible two-instruction
ORR+MOVK sequences.
Differential Revision: https://reviews.llvm.org/D47176
llvm-svn: 333218
Re-appply r333147, reverted in r333152 due to a pre-existing bug. As
D47308 has been merged in r333206, the OSX issue should now be
resolved.
In many cases JIT users will know in which module a symbol
resides. Avoiding to search other modules can be more efficient. It
also allows to handle duplicate symbol names between modules.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D44889
llvm-svn: 333215
The lack of name mangling caused a unittest failure after r333147 (in
TestEagerIRCompilation), as OSX prefixes symbol names with '_'. The
lack of name mangling therefore leads to a NULL pointer being returned
and then called, hence the failure.
While it may look like it, this isn't an actual behavioral change, as
findSymbolIn() previously was not exposed externally, and essentially
dead code. Which explains why nobody noticed the issue previously.
Reviewers: lhames
Reviewed By: lhames
Subscribers: chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D47308
llvm-svn: 333206
Summary:
In LICM, CFG could be changed in splitPredecessorsOfLoopExit(), which update
only DT and LoopInfo. Therefore, we should preserve only DT and LoopInfo specifically,
instead of all analyses that depend on the CFG (setPreservesCFG()).
This change should fix PR37323.
Reviewers: uabelho, davide, dberlin, Ka-Ka
Reviewed By: dberlin
Subscribers: mzolotukhin, bjope, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46775
llvm-svn: 333198
The ARM/ARM64 AESE and AESD instructions have a builtin XOR as the first step in
the instruction. Therefore, if the AES key is zero and the AES data was
previously XORed, it can be combined into a single instruction.
Differential Revision: https://reviews.llvm.org/D47239
Patch by Michael Brase!
llvm-svn: 333193
Ideally we'd be able to test a CPU by using __builtin_readcyclecounter()/RDTSC instead (PR37193) if a model/cycle-counter is not specified.
NOTE: Jaguar PMCs don't give good coverage of resource pipes specified in the model (at the macro-vs-micro-op levels) but we should be able to cover at least a few resources.
llvm-svn: 333190
Summary:
It's internal to the VPlanHCFGBuilder and should not be visible outside of its
translation unit.
Reviewers: dcaballe, fhahn
Reviewed By: fhahn
Subscribers: rengolin, bollu, tschuett, llvm-commits, rkruppe
Differential Revision: https://reviews.llvm.org/D47312
llvm-svn: 333187
Forgot to move the CommandLine.h include form the implementation to the
header and didn't notice the failure with my local modules build.
llvm-svn: 333177
This commit adds a color category so tools can document this option and
enables it for dwarfdump and dsymuttil.
rdar://problem/40498996
llvm-svn: 333176
In addPhysRegDeps, subregister entries of the defined register were previously
not removed from Uses or Defs, which resulted in extra redundant edges for
subregs around the register definition.
This is principally NFC (in very rare cases some node got a different height).
This makes the DAG more readable and efficient in some cases.
Review: Andy Trick
https://reviews.llvm.org/D46838
llvm-svn: 333165
To do this:
1. Add fixup_riscv_relax fixup types which eventually will
transfer to R_RISCV_RELAX relocation types.
2. Insert R_RISCV_RELAX relocation types to auipc function call
expression when linker relaxation enabled.
Differential Revision: https://reviews.llvm.org/D44886
llvm-svn: 333158
Summary:
If NaryReassociate succeed it will, when replacing the old instruction
with the new instruction, also recursively delete trivially
dead instructions from the old instruction. However, if the input to the
NaryReassociate pass contain dead code it is not save to recursively
delete trivially deadinstructions as it might lead to deleting the newly
created instruction.
This patch will fix the problem by using WeakVH to detect this
rare case, when the newly created instruction is dead, and it will then
restart the basic block iteration from the beginning.
This fixes pr37539
Reviewers: tra, meheff, grosser, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47139
llvm-svn: 333155
This reverts r333147 until https://reviews.llvm.org/D47308 is ready to
be reviewed. r333147 exposed a behavioural difference between
OrcCBindingsStack::findSymbolIn() and OrcCBindingsStack::findSymbol(),
where only the latter does name mangling. After r333147 that causes a
test failure on OSX, because the new test looks for main using
findSymbolIn() but the mangled name is _main.
llvm-svn: 333152
The match pattern in the definition of LXSDX is xoaddr, so the Pseudo
instruction XFLOADf64 never gets selected. XFLOADf64 expands to LXSDX/LFDX post
RA based on the register pressure. To avoid ambiguity, we need to remove the
select pattern for LXSDX, same as what was done for LXSD. STXSDX also have
the same issue.
Patch by Qing Shan Zhang (steven.zhang).
Differential Revision: https://reviews.llvm.org/D47178
llvm-svn: 333150
In many cases JIT users will know in which module a symbol
resides. Avoiding to search other modules can be more efficient. It
also allows to handle duplicate symbol names between modules.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D44889
llvm-svn: 333147
When a bitcast is being sunk in -codegenprepare pass, its DI wasn't
copied over to the newly created instruction. This patch fixes that
bug.
Patch by Kareem Ergawy!
Differential Revision: https://reviews.llvm.org/D47282
llvm-svn: 333133
Summary:
Set CostPerUse higher for registers that are not used in the compressed
instruction set. This will influence the greedy register allocator to reduce
the use of registers that can't be encoded in 16 bit instructions. This
affects register allocation even when compressed instruction isn't targeted,
we see no major negative codegen impact.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
Differential Revision: https://reviews.llvm.org/D47039
llvm-svn: 333132
by replacing DenseMap with IndexedMap for LLTs within MRI, as
benchmarked by cross-compiling sqlite3 amalgamation for AArch64
on x86 machine.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D46809
llvm-svn: 333125
Implemente patterns to extract [Un]signed Word vector element and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46536
llvm-svn: 333115
Implemente patterns to extract [Un]signed DWord vector element and convert to
quad-precision.
Differential Revision: https://reviews.llvm.org/D46333
llvm-svn: 333112
Summary:
StructurizeCFG::orderNodes basically uses a reverse post-order (RPO) traversal of the region list to get the order.
The only problem with it is that sometimes backedges for outer loops will be visited before backedges for inner loops.
To solve this problem, a loop depth based approach has been used to make sure all blocks in this loop has been visited
before moving on to outer loop.
However, we found a problem for a SubRegion which is a loop itself:
--> BB1 --> BB2 --> BB3 -->
In this case, BB2 is a SubRegion (loop), and thus its loopdepth is different than that of BB1 and BB3. This fact will lead
BB2 to be placed in the wrong order.
In this work, we treat the SubRegion as a special case and use its exit block to determine the loop and its depth
to guard the sorting.
Reviewers:
arsenm, jlebar
Differential Revision:
https://reviews.llvm.org/D46912
llvm-svn: 333111
Summary:
Finally fixes [[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]].
Now that the backend is all done, we can finally fold it!
The canonical unfolded masked merge pattern is
```(x & m) | (y & ~m)```
There is a second, equivalent variant:
```(x | ~m) & (y | m)```
Only one of them (the or-of-and's i think) is canonical.
And if the mask is not a constant, we should fold it to:
```((x ^ y) & M) ^ y```
https://rise4fun.com/Alive/ndQw
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: nicholas, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D46814
llvm-svn: 333106
Summary: This patch adds a PDT constructor from Function and lets codes previously using a local class to do this use PostDominatorTree class directly.
Reviewers: davide, kuhar, grosser, dberlin
Reviewed By: kuhar
Author: NutshellySima
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46709
llvm-svn: 333102
r333093 introduced several warnings (-Wlogical-not-parentheses,
-Wbool-compare).
Adding parentheses in MipsSEInstrInfo::isCopyInstr() to silence it.
llvm-svn: 333097
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
Now that the LLVM_DEBUG() macro landed on the various sub-projects
the DEBUG macro can be removed.
Also change the new uses of DEBUG to LLVM_DEBUG.
Differential Revision: https://reviews.llvm.org/D46952
llvm-svn: 333091
For RISC-V it is desirable to have relaxation happen in the linker once
addresses are known, and as such the size between two instructions/byte
sequences in a section could change.
For most assembler expressions, this is fine, as the absolute address results
in the expression being converted to a fixup, and finally relocations.
However, for expressions such as .quad .L2-.L1, the assembler folds this down
to a constant once fragments are laid out, under the assumption that the
difference can no longer change, although in the case of linker relaxation the
differences can change at link time, so the constant is incorrect. One place
where this commonly appears is in debug information, where the size of a
function expression is in a form similar to the above.
This patch extends the assembler to allow an AsmBackend to declare that it
does not want the assembler to fold down this expression, and instead generate
a pair of relocations that allow the linker to carry out the calculation. In
this case, the expression is not folded, but when it comes to emitting a
fixup, the generic FK_Data_* fixups are converted into a pair, one for the
addition half, one for the subtraction, and this is passed to the relocation
generating methods as usual. I have named these FK_Data_Add_* and
FK_Data_Sub_* to indicate which half these are for.
For RISC-V, which supports this via e.g. the R_RISCV_ADD64, R_RISCV_SUB64 pair
of relocations, these are also set to always emit relocations relative to
local symbols rather than section offsets. This is to deal with the fact that
if relocations were calculated on e.g. .text+8 and .text+4, the result 12
would be stored rather than 4 as both addends are added in the linker.
Differential Revision: https://reviews.llvm.org/D45181
Patch by Simon Cook.
llvm-svn: 333079
The Sparc asm parser currently has custom parsing logic for .half, .word,
.nword and .xword. Rather than use this custom logic, we can just use
addAliasForDirective to enable the reuse of AsmParser::parseDirectiveValue.
https://reviews.llvm.org/D47003
llvm-svn: 333078
The AArch64 asm parser currently has custom parsing logic for .hword, .word,
and .xword. Rather than use this custom logic, we can just use
addAliasForDirective to enable the reuse of AsmParser::parseDirectiveValue.
Differential Revision: https://reviews.llvm.org/D47000
llvm-svn: 333077
This is a different approach to fixing the problem described in D46746.
RISCVAsmBackend currently depends on the getSize helper function returning the
number of bytes a fixup may change (note: some other backends have a similar
helper named getFixupNumKindBytes). As noted in that review, this doesn't
return the correct size for FK_Data_1, FK_Data_2, or FK_Data_8 meaning that
too few bytes will be written in the case of FK_Data_8, and there's the
potential of writing outside the Data array for the smaller fixups.
D46746 extends getSize to recognise some of the builtin fixup types. Rather
than having a function that needs to be kept up to date as new builtin or
target-specific fixups are added, We can calculate an appropriate bound on the
number of bytes that might be touched using Info.TargetSize and
Info.TargetOffset.
Differential Revision: https://reviews.llvm.org/D46965
llvm-svn: 333076
Loop unswitching makes substantial changes to a loop that can also affect cached
SCEV info in its outer loops as well, but it only cares to invalidate SCEV cache for the
innermost loop in case of full unswitching and does not invalidate anything at all in
case of trivial unswitching. As result, we may end up with incorrect data in cache.
Differential Revision: https://reviews.llvm.org/D46045
Reviewed By: mzolotukhin
llvm-svn: 333072
Summary:
Patch for capture tracking broke
bootstrap of clang with -fstict-vtable-pointers
which resulted in debbugging nightmare. It was fixed
https://reviews.llvm.org/D46900 but as it turned
out, there were other parts like inliner (computing of
noalias metadata) that I found after bootstraping with enabled
assertions.
Reviewers: hfinkel, rsmith, chandlerc, amharc, kuhar
Subscribers: JDevlieghere, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47088
llvm-svn: 333070
SafepointIRVerifier crashed while traversing blocks without a DomTreeNode.
This could happen with a custom pipeline or when some optional passes were skipped by OptBisect.
SafepointIRVerifier is fixed to traverse basic blocks that are reachable from entry. Test are added.
Patch Author: Yevgeny Rouban!
Reviewers: anna, reames, dneilson, DaniilSuchkov, skatkov
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47011
llvm-svn: 333063
Also bringing ARMRegisterBankInfo::getRegBankFromRegClass
implementation up to speed with the *.td-definition.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D43982
llvm-svn: 333056
Summary:
There are functions using the term 'funclet' to refer to both
1. an EH scopes, the structure of BBs that starts with
catchpad/cleanuppad and ends with catchret/cleanupret, and
2. a small function that gets outlined in AsmPrinter, which is the
original meaning of 'funclet'.
So far the two have been the same thing; EH scopes are always outlined
in AsmPrinter as funclets at the end of the compilation pipeline. But
now wasm also uses scope-based EH but does not outline those, so we now
need to correctly distinguish those two use cases in functions.
This patch splits `MachineBasicBlock::isFuncletEntry` into
`isFuncletEntry` and `isEHScopeEntry`, and
`MachineFunction::hasFunclets` into `hasFunclets` and `hasEHScopes`, in
order to distinguish the two different use cases. And this also changes
some uses of the term 'funclet' to 'scope' in `getFuncletMembership` and
change the function name to `getEHScopeMembership` because this function
is not about outlined funclets but about EH scope memberships.
This change is in the same vein as D45559.
Reviewers: majnemer, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D47005
llvm-svn: 333045
Also, produce the canonical IR abs (s<0) to be more efficient.
This is the libcall equivalent of the clang builtin change from:
rL333038
Pasting from that commit message:
The stdlib functions are defined in section 7.20.6.1 of the C standard with:
"If the result cannot be represented, the behavior is undefined."
That lets us mark the negation with 'nsw' because "sub i32 0, INT_MIN" would
be UB/poison.
llvm-svn: 333042
Summary: Previous patch does not care if a value is changed between calloc and strlen. This needs to be removed from InstCombine and maybe moved to DSE later after some rework.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47218
llvm-svn: 333022
The integer operation convertion for some reason only happens
if the source is a bitcast from an integer, which happens to
always be the situation when the result is loaded. Add
an additional pattern for when the source operation is really
an FP operation.
llvm-svn: 333019
When we're outlining a sequence that ends in a call, we can save up to
three instructions in the outlined function by turning the call into
a tail-call. I refer to this as thunk outlining because the resulting
outlined function looks like a thunk; suggestions welcome for a better
name.
In addition to making the outlined function shorter, thunk outlining
allows outlining calls which would otherwise be illegal to outline:
we don't need to save/restore LR, so we don't need to prove anything
about the stack access patterns of the callee.
To make this work effectively, I also added
MachineOutlinerInstrType::LegalTerminator to the generic MachineOutliner
code; this allows treating an arbitrary instruction as a terminator in
the suffix tree.
Differential Revision: https://reviews.llvm.org/D47173
llvm-svn: 333015
This patch fixes two bugs:
* test1: Previously assume(a >= 5) concluded that a == 5. That's only
valid for assume(a == 5)...
* test2: If operands were swapped, additional users were added to the
wrong cmp operand. This resulted in an "unsettled iteration"
assertion failure.
Patch by Nikita Popov
Differential Revision: https://reviews.llvm.org/D46974
llvm-svn: 333007
When printing an error for an invalid address range in a DIE, we used to
print the child above the parent, which is counter intuitive. This patch
reverses the order and indents the child to mimic the way we print the
debug info section.
llvm-svn: 333006
In DWARF v5, the DWO ID is in the (split/skeleton) CU header, not an
attribute on the CU DIE.
This changes the size of those headers, so use the parsed size whenever
we have one, for simplicitly.
Differential Revision: https://reviews.llvm.org/D47158
llvm-svn: 333004
to a base class (IRMaterializationUnit).
The new class, IRMaterializationUnit, provides a convenient base for any client
that wants to write a materializer for LLVM IR.
llvm-svn: 332993
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332977
This enables us to detect more fast path sdiv cases under cost analysis.
This patch also enables us to handle non-uniform-constant pow2 cases for X86 SDIV costs.
Found while working on D46276
Future patches can then extend the vectorizers to more fully support non-uniform pow2 cases.
Differential Revision: https://reviews.llvm.org/D46637
llvm-svn: 332969
Summary:
When lowerswitch merge several cases into a new default block it's not
updating the PHI nodes accordingly. The code that update the PHI nodes
for the default edge only update the first entry and do not remove the
remaining ones, to make sure the number of entries match the number of
predecessors.
This is easily fixed by replacing the code that update the PHI node with
the already existing utility function for updating PHI nodes.
Reviewers: hans, reames, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47055
llvm-svn: 332960
Summary:
In LoopVersioning::addPHINodes we need to iterate over all
users for a value "Inst", and if the user is outside of the
VersionedLoop we should replace the use of "Inst" by using
the value "PN" instead.
Replacing the use of "Inst" for a user of "Inst" also means
that Inst->users() is modified. So it is not safe to do the
replace while iterating over Inst->users() as we used to do.
This patch splits the task into two steps. First we iterate
over Inst->users() to find all users that should be updated.
Those users are saved into a local data structure on the stack.
And then, in the second step, we do the actual updates. This
time iterating over the local data structure.
Reviewers: mzolotukhin, anemet
Reviewed By: mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47134
llvm-svn: 332958
We can eliminate old value if bound_ctrl = 1 and row_mask = bank_mask = 0xf.
This is alternative implementation working with the intrinsic in InstCombine.
Original review for past-ISel optimization: D46570.
Differential Revision: https://reviews.llvm.org/D46596
llvm-svn: 332956
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
For both argument and return types, promote illegal types like i24 to i32,
and if a type can't be easily promoted, clear out the signature before
bailing out, so avoid leaving it in a partially complete state.
Fixes PR37546.
llvm-svn: 332947
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
This code appears to have been copied from the mach-o streamer. It has
no effect in ELF because indirect symbols are specific to mach-o.
llvm-svn: 332926
This is the FP sibling of D43141 with the corresponding IR change in rL327212.
We can't propagate undef here because if a variable operand is a NaN, these
binops must propagate NaN. Neither global nor node-level fast-math makes a
difference. If we have 'nnan', I think later folds can turn the NaN into undef.
The tests in X86/fp-undef.ll are meant to be the definitive verification for
these folds - everything reduces identically now.
The other test changes are collateral damage. They may need to be altered to
preserve their intent.
Differential Revision: https://reviews.llvm.org/D47026
llvm-svn: 332920
r332654 tried to fix an unused function warning with
a void cast. This approach worked for clang and gcc
but not for MSVC. This commit replaces the void cast
with the LLVM_ATTRIBUTE_USED approach.
llvm-svn: 332910
Summary:
As pointed out in D46528, we errneously transform cases like `xor X, -1`,
even though we use said function.
It's because the `-1` is actually a bitcast there.
So i think we can just look through it in the function.
Differential Revision: https://reviews.llvm.org/D47156
llvm-svn: 332905
Summary:
This **appears** to be the last missing piece for the masked merge pattern handling in the backend.
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andps`+`andnps` / `bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`), and we need to make sure that they are generated.
Differential Revision: https://reviews.llvm.org/D46528
llvm-svn: 332904
Also tightens the behavior of ExecutionSession::failQuery. Queries can usually
only be failed by marking a symbol as failed-to-materialize, but
ExecutionSession::failQuery provides a second route, and both routes may be
executed from different threads. In the case that a query has already been
failed due to a materialization error, ExecutionSession::failQuery will
direct the error to ExecutionSession::reportError instead.
llvm-svn: 332898
The lookup function provides blocking symbol resolution for JIT clients (not
layers themselves) so it does not need to track symbol dependencies via a
MaterializationResponsibility.
llvm-svn: 332897
SimplifyDemandedBits can remove bits from the masks for the shift amounts we need to see to detect rotates.
This patch uses zeroes from computeKnownBits to fill in some of these mask bits to make the match work.
As currently written this calls computeKnownBits even when the mask hasn't been simplified because it made the code simpler. If we're worried about compile time performance we can improve this.
I know we're talking about making a rotate intrinsic, but hopefully we can go ahead and do this change and just make sure the rotate intrinsic also handles it.
Differential Revision: https://reviews.llvm.org/D47116
llvm-svn: 332895
This code should really do exactly the same thing for 32-bit x86 and
64-bit small code models, with the exception that RIP-relative
addressing can't use base and index registers.
llvm-svn: 332893
This removes 6 intrinsics since we no longer need separate mask and maskz intrinsics.
Differential Revision: https://reviews.llvm.org/D47124
llvm-svn: 332890
Rather than relying on the user to do the address calculating in
DW_AT_location we should just dump the absolute address.
rdar://problem/38513870
Differential revision: https://reviews.llvm.org/D47152
llvm-svn: 332873
This class will be used to create regular, non-split ELF files.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47049
llvm-svn: 332870
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
Change matchSelectPattern to return X and -X for ABS/NABS in a well defined order. Adjust EarlyCSE to account for this. Ensure the SPF result is some kind of min/max and not abs/nabs in one place in InstCombine that made me nervous.
Prevously we returned the two operands of the compare part of the abs pattern. The RHS is always going to be a 0i, 1 or -1 constant. This isn't a very meaningful thing to return for any one. There's also some freedom in the abs pattern as to what happens when the value is equal to 0. This freedom led to early cse failing to match when different constants were used in otherwise equivalent operations. By returning the input and its negation in a defined order we can ensure an exact match. This also makes sure both patterns use the exact same subtract instruction for the negation. I believe CSE should evebntually make this happen and properly merge the nsw/nuw flags. But I'm not familiar with CSE and what order it does things in so it seemed like it might be good to really enforce that they were the same.
Differential Revision: https://reviews.llvm.org/D47037
llvm-svn: 332865
AMDGPUDAGToDAGISel adds DivergenceAnalysis in getAnalysisUsage
but does not list it in pass dependencies which may lead to
crash.
Differential Revision: https://reviews.llvm.org/D47151
llvm-svn: 332862
r332654 was reverted due to an unused function warning in
release build. This commit includes the same code with the
warning silenced.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332860
Also clean up a couple of hacks where we were writing the section
contents to another stream by setting the object writer's stream,
writing and setting it back.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47038
llvm-svn: 332858
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Summary:
This patch fixes PR37526 by simplifying the newly generated LoadInst
instructions. If the pointer address is a bitcast from the pointer to
the NewType, we can just remove this extra bitcast instead of creating
the new one. This fixes the PR37526 + may speed up the whole compilation
process.
Reviewers: spatel, RKSimon, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47144
llvm-svn: 332855
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Change the "recoverable" error callback to take an Error instaed of a
string.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D46831
llvm-svn: 332845
Chances are we'll be asked again after type legalization, but before that point
it's better to claim misaligned accesses aren't allowed than to assert.
llvm-svn: 332840
We were previously using a DT in CVP through SimplifyQuery, but not requiring it in
the new pass manager. Hence it would crash if DT was not already available. This now
gets DT directly and plumbs it through to where it is used (instead of using it
through SQ).
llvm-svn: 332836
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332834
As suggested by Fabian on PR37426, we can use PMULUDQ to perform v4i32 vector rotations as the upper 32bits of the multiply will contain the 'wrapped' bits of the rotation.
v8i16/v16i8 rotations would be straightforward to add to lowerRotate in the future - ideally we'd mostly share code with the vector shifts lowering.
Differential Revision: https://reviews.llvm.org/D46954
llvm-svn: 332832
Summary: Add wrappers for a module's alias iterators and a getter and setter for the aliasee value.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46808
llvm-svn: 332826
Previously the compiler was using the microMIPSR3 variants, incorrectly.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46948
llvm-svn: 332820
We already do this for min/max (see the blob above the diff),
so we should do the same for abs/nabs.
A sign-bit check (<s 0) is used as a predicate for other IR
transforms and it's likely the best for codegen.
This might solve the motivating cases for D47037 and D47041,
but I think those patches still make sense. We can't guarantee
this canonicalization if the icmp has more than one use.
Differential Revision: https://reviews.llvm.org/D47076
llvm-svn: 332819
Summary:
- Provide LLVMGetValueName2 and LLVMSetValueName2 that return and take the length of the provided C string respectively
- Deprecate LLVMGetValueName and LLVMSetValueName
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46890
llvm-svn: 332810
In the patch rL329547, we have lifted the over-restrictive limitation on collected range
checks, allowing to work with range checks with the end of their range not being
provably non-negative. However it appeared that the non-negativity of this value was
assumed in the utility function `ClampedSubtract`. In particular, its reasoning is based
on the fact that `0 <= SINT_MAX - X`, which is not true if `X` is negative.
The function `ClampedSubtract` is only called twice, once with `X = 0` (which is OK)
and the second time with `X = IRC.getEnd()`, where we may now see the problem if
the end is actually a negative value. In this case, we may sometimes miscompile.
This patch is the conservative fix of the miscompile problem. Rather than rejecting
non-provably non-negative `getEnd()` values, we will check it for non-negativity in
runtime. For this, we use function `smax(smin(X, 0), -1) + 1` that is equal to `1` if `X`
is non-negative and is equal to 0 if `X` is negative. If we multiply `Begin, End` of safe
iteration space by this function calculated for `X = IRC.getEnd()`, we will get the original
`[Begin, End)` if `IRC.getEnd()` was non-negative (and, thus, `ClampedSubtract` worked
correctly) and the empty range `[0, 0)` in case if ` IRC.getEnd()` was negative.
So we in fact prohibit execution of the main loop if at least one of range checks was
made against a negative value (and we figured it out in runtime). It is still better than
what we have before (non-negativity had to be proved in compile time) and prevents
us from miscompile, however it is sometiles too restrictive for unsigned range checks
against a negative value (which in fact can be eliminated).
Once we re-implement `ClampedSubtract` in a way that it handles negative `X` correctly,
this limitation can be lifted, too.
Differential Revision: https://reviews.llvm.org/D46860
Reviewed By: samparker
llvm-svn: 332809
Summary:
In https://reviews.llvm.org/rL332804 I loosed the assertion in
the Clang driver test that forced me to revert
https://reviews.llvm.org/rL332299. Once this lands I should be
able to narrow down what caused PS4 buildbots to fail, and
reinstate the check in that test.
Test Plan: check-llvm & check-clang
llvm-svn: 332805
The evaluator goes through BB and creates global vars as temporary values to evaluate
results of LLVM instructions. It creates undef for alloca, however it assumes alloca
in addr space 0. If the next instruction is addrspace cast to 0, then we get an invalid
cast instruction.
This patch let the temp global var have an address space matching alloca addr space,
so that the valuation can be done.
Differential Revision: https://reviews.llvm.org/D47081
llvm-svn: 332794
Summary:
invariant.group.launder should not stop propagation
of nonnull and dereferenceable, because e.g. we would not be
able to hoist loads speculatively.
Reviewers: rsmith, amharc, kuhar, xbolva00, hfinkel
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46972
llvm-svn: 332788
Summary:
This feature is not needed, but it might be usefull in the future
to use metadata to mark what which function should support it
(and strip it when not).
Reviewers: rsmith, sanjoy, amharc, kuhar
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45419
llvm-svn: 332787
Summary:
Memdep had funny bug related to invariant.groups - because it did not
invalidated cache, in some very rare cases it was possible to show memory
dependence of the instruction that was deleted, but because other
instruction took it's place it resulted in call to vtable!
Thanks @amharc for repro!.
Reviewers: dberlin, kuhar, amharc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45320
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 332781
Eliminate loads from the dispatch packet when they will have
a known value.
Also pattern match the code used by the library to handle partial
workgroup dispatches, which isn't necessary if reqd_work_group_size
is used.
llvm-svn: 332771
Summary:
Floating point division by zero or even undef does not have undefined
behavior and may occur due to optimizations.
Fixes https://bugs.llvm.org/show_bug.cgi?id=37523.
Reviewers: kcc
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47085
llvm-svn: 332761
The casts in the delta computation for size remarks should have
been static casts. This fixes that.
Thanks to Dávid Bolvanský for pointing that out.
llvm-svn: 332758
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D46910
llvm-svn: 332750
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
The code that generates post-increments for Hexagon considered
integer values only. This patch adds support to generate them for
floating point values, f32 and f64.
Differential Revision: https://reviews.llvm.org/D47036
llvm-svn: 332748
The introduced problem is:
llvm.src/lib/Transforms/Vectorize/VPlanVerifier.cpp:29:13: error: unused function 'hasDuplicates' [-Werror,-Wunused-function]
static bool hasDuplicates(const SmallVectorImpl<VPBlockBase *> &VPBlockVec) {
^
llvm-svn: 332747
BtVer2 - fix NumMicroOp and account for the Lat+6cy GPR->XMM and Lat+1cy XMm->GPR delays (see rL332737)
The high number of MOVD/MOVQ equivalent instructions meant that there were a number of missed patterns in SNB/Znver1:
SNB - add missing GPR<->MMX costs (taken from Agner / Intel AOM)
Znver1 - add missing GPR<->XMM MOVQ costs (taken from Agner)
llvm-svn: 332745
The intrinsic legalization for masked truncate uses ISD::TRUNCATE which can be constant folded by getNode. This prevents getVectorMaskingNode from seeing the ISD::TRUNCATE special case where it should emit X86ISD::SELECT instead of ISD::VSELECT. This causes a vselect with a v16i1 or v8i1 condition to be emitted during vector legalization. but vector legalization doesn't revisit nodes it creates. DAG combine will then promote this condition to match the result type. Then op legalization will try to legalize it, but the custom lowering hook returned SDValue(). But op legalization doesn't have an Expand for VSELECT because it expects vector legalization to have taken care of it. So the operation sticks around and fails in isel.
This patch adds a custom legalization hook to morph it to a vXi8 vselect instead.
This also simplifies the normal vXi16 vselect handling because vector legalization was normally expanding to AND/ANDN/OR and DAG combine was turning that into VBLENDVB. So we can skip a step by doing it directly.
Fixes PR37499
Differential Revision: https://reviews.llvm.org/D47025
llvm-svn: 332743
This is a revert of the changes from https://reviews.llvm.org/D46265;
the new test introduced (test/CodeGen/X86/PR37310.mir) causes buildbot
failures.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47061
llvm-svn: 332742
Avoid requirement that number of values must be known at assembler
time.
Fixes PR33586.
Reviewers: rnk, peter.smith, echristo, jyknight
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46703
llvm-svn: 332741
This patch adds a remark which tells the user when a pass changes the number of
IR instructions in a module.
It can be enabled by using -Rpass-analysis=size-info.
The point of this is to make it easier to collect statistics on how passes
modify programs in terms of code size. This is similar in concept to timing
reports, but using a remark-based interface makes it easy to diff changes over
multiple compilations of the same program.
By adding functionality like this, we can see
* Which passes impact code size the most
* How passes impact code size at different optimization levels
* Which pass might have contributed the most to an overall code size
regression
The patch lives in the legacy pass manager, but since it's simply emitting
remarks, it shouldn't be too difficult to adapt the functionality to the new
pass manager as well. This can also be adapted to handle MachineInstr counts in
code gen passes.
https://reviews.llvm.org/D38768
llvm-svn: 332739
Retag some instructions that were missed when we split off vector load/store/moves - MOVQ/MOVD etc.
Fixes BtVer2/SLM which have different behaviours for GPR stores.
llvm-svn: 332718
Retag some instructions that were missed when we split off vector load/store/moves - MOVSS/MOVSD/MOVHPD/MOVHPD/MOVLPD/MOVLPS etc.
Fixes BtVer2/SLM which have different behaviours for GPR stores.
llvm-svn: 332714
Summary:
Avoid assert/crash during liveness calculation in situations where the
incoming machine function has statically unreachable BBs.
Fixes PR37130.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46265
llvm-svn: 332707
Sorry, the commit comment for r332703 is completely broken.
My mind slipped - the right description would be:
In SystemZDAGToDAGISel::Select(), in the handling for SELECT_CCMASK:
Check if UpdateNodeOperands() returns a different SDNode and in that
case call ReplaceNode.
Review: Ulrich Weigand.
llvm-svn: 332706
This patch aims to match the changes introduced in gcc by
https://gcc.gnu.org/ml/gcc-cvs/2018-04/msg00534.html. The
IBT feature definition is removed, with the IBT instructions
being freely available on all X86 targets. The shadow stack
instructions are also being made freely available, and the
use of all these CET instructions is controlled by the module
flags derived from the -fcf-protection clang option. The hasSHSTK
option remains since clang uses it to determine availability of
shadow stack instruction intrinsics, but it is no longer directly used.
Comes with a clang patch (D46881).
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46882
llvm-svn: 332705
Summary:
Fix a case where FoldBranchToCommonDest() would bail out from doing CSE
when encountering a debug intrinsic. Handle that by skipping past the
debug intrinsics.
Also, as a minor refactoring, rename checkCSEInPredecessor() to
tryCSEWithPredecessor() to make it a bit more clear that the function
may remove instructions.
Reviewers: fhahn, craig.topper, dblaikie, xbolva00
Reviewed By: fhahn, xbolva00
Subscribers: vsk, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D46635
llvm-svn: 332698
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
CanProveNotTakenFirstIteration utility does not handle the case when
condition of the branch is a constant. Add its handling.
Reviewers: reames, anna, mkazantsev
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46996
llvm-svn: 332695
1. Define Myriad-specific ASan constants.
2. Add code to generate an outer loop that checks that the address is
in DRAM range, and strip the cache bit from the address. The
former is required because Myriad has no memory protection, and it
is up to the instrumentation to range-check before using it to
index into the shadow memory.
3. Do not add an unreachable instruction after the error reporting
function; on Myriad such function may return if the run-time has
not been initialized.
4. Add a test.
Differential Revision: https://reviews.llvm.org/D46451
llvm-svn: 332692
This reapplies commits: r330271, r330592, r330779.
[DEBUG] Initial adaptation of NVPTX target for debug info emission.
Summary:
Patch adds initial emission of the debug info for NVPTX target.
Currently, only .file and .loc directives are emitted, everything else is
commented out to not break the compilation of Cuda.
llvm-svn: 332689
Counting the number of instructions is both unintuitive and inaccurate.
On AArch64, this only affects the generated remarks and certain rare
pseudo-instructions, but it will have a bigger impact on other targets.
Differential Revision: https://reviews.llvm.org/D46921
llvm-svn: 332685
Summary:
The Closure allocated in the main loop is allocated on the stack. However,
later in the code its address is taken (and used for comparisons). This
obviously doesn't work. In fact, the Closure will get the same stack address
during every loop iteration, rendering the check that intended to identify
Closure conflicts entirely ineffective. Fix this bug by giving every Closure
a unique ID and using that for comparison. Alternatively, we could heap
allocate the closure object.
Fixes PR37396
FixesJuliaLang/julia#27032
Reviewers: craig.topper, guyblank
Reviewed By: craig.topper
Subscribers: vchuravy, llvm-commits
Differential Revision: https://reviews.llvm.org/D46800
llvm-svn: 332682
Summary:
We cannot simply delete IMPLICIT_DEF nodes. They may be used
later (e.g. by a PHI) and deleting them will cause later passes (e.g.
LiveVariables) to crash. However, it seems fine to ignore them for
purposes of the domain reassignment (as we do with PHI).
Fixes PR37430
FixesJuliaLang/julia#27080
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D46797
llvm-svn: 332680
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
Summary:
- Add wasm personality function
- Re-categorize the existing `isFuncletEHPersonality()` function into
two different functions: `isFuncletEHPersonality()` and
`isScopedEHPersonality(). This becomes necessary as wasm EH uses scoped
EH instructions (catchswitch, catchpad/ret, and cleanuppad/ret) but not
outlined funclets.
- Changed some callsites of `isFuncletEHPersonality()` to
`isScopedEHPersonality()` if they are related to scoped EH IR-level
stuff.
Reviewers: majnemer, dschuff, rnk
Subscribers: jfb, sbc100, jgravelle-google, eraman, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45559
llvm-svn: 332667
notifyFailed method rather than passing in an error generator.
VSO::notifyFailed is responsible for notifying queries that they will not
succeed due to error. In practice the queries don't care about the details
of the failure, just the fact that a failure occurred for some symbols.
Having VSO::notifyFailed take care of this simplifies the interface.
llvm-svn: 332666
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
llvm-svn: 332664
Summary:
There was some unfinished work started for offset tracking in CFLGraph by the author of implementation of Andersen algorithm. This work was completed and support for field sensitivity was added to the core of Andersen algorithm.
The performance results seem promising.
SPEC2006 int_base score was increased by 1.1 % (I compared clang 6.0 with clang 6.0 with this patch). The avergae compile time was increased by +- 1 % according my measures with small and medium C/C++ projects (I did not tested it on the large projects with milions of lines of code)
Reviewers: chandlerc, george.burgess.iv, rja
Reviewed By: rja
Subscribers: rja, llvm-commits
Differential Revision: https://reviews.llvm.org/D46282
llvm-svn: 332657
Patch #3 from VPlan Outer Loop Vectorization Patch Series #1
(RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
Expected to be NFC for the current inner loop vectorization path. It
introduces the basic algorithm to build the VPlan plain CFG (single-level
CFG, no hierarchical CFG (H-CFG), yet) in the VPlan-native vectorization
path using VPInstructions. It includes:
- VPlanHCFGBuilder: Main class to build the VPlan H-CFG (plain CFG without nested regions, for now).
- VPlanVerifier: Main class with utilities to check the consistency of a H-CFG.
- VPlanBlockUtils: Main class with utilities to manipulate VPBlockBases in VPlan.
Reviewers: rengolin, fhahn, mkuper, mssimpso, a.elovikov, hfinkel, aprantl.
Differential Revision: https://reviews.llvm.org/D44338
llvm-svn: 332654
Summary:
When lowering global address, lower the base as a TargetGlobal first then
create an SDNode for the offset separately and chain it to the address calculation
This optimization will create a DAG where the base address of a global access will
be reused between different access. The offset can later be folded into the immediate
part of the memory access instruction.
With this optimization we generate:
lui a0, %hi(s)
addi a0, a0, %lo(s) ; shared base address.
addi a1, zero, 20 ; 2 instructions per access.
sw a1, 44(a0)
addi a1, zero, 10
sw a1, 8(a0)
addi a1, zero, 30
sw a1, 80(a0)
Instead of:
lui a0, %hi(s+44) ; 3 instructions per access.
addi a1, zero, 20
sw a1, %lo(s+44)(a0)
lui a0, %hi(s+8)
addi a1, zero, 10
sw a1, %lo(s+8)(a0)
lui a0, %hi(s+80)
addi a1, zero, 30
sw a1, %lo(s+80)(a0)
Which will save one instruction per access.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, apazos, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46989
llvm-svn: 332641
Summary:
This patch implements MC support for tail psuedo instruction.
A follow-up patch implements the codegen support as well as handling of the indirect tail pseudo instruction.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, llvm-commits
Differential Revision: https://reviews.llvm.org/D46221
llvm-svn: 332634
Summary:
The current StructurizeCFG pass only works for CFG with one exit. AMDGPUUnifyDivergentExitNodes combines multiple "return" blocks and/or "unreachable" blocks
to one exit block for the Structurizer to work. However, infinite loop is another kind of special "exit", and if we don't handle it, the case of multiple exits will prevent the structurizer from working.
In this work, for each infinite loop, we add a dummy edge to the "return" block, and thus the AMDGPUUnifyDivergentExitNodes pass will work with infinite loops.
This will make CFG with infinite loops be structurized.
Reviewer:
nhaehnle
Differential Revision:
https://reviews.llvm.org/D46340
llvm-svn: 332625
According to alive this is valid. I'm hoping to use this to make an assumption that the sign bit is zero after this sequence. The only way it wouldn't be is if the input was INT__MIN, but by preserving the flags we can make doing this to INT_MIN UB.
The nuw flags is weird because it creates such a contradiction that the original number would have to be positive meaning we could remove the select entirely, but we don't get that far.
Differential Revision: https://reviews.llvm.org/D46988
llvm-svn: 332623
The isReMaterlizable flag is somewhat confusing, unlike most other instruction
flags it is currently interpreted as a hint (mightBeRematerializable would be
a better name). While LUI is always rematerialisable, for an instruction like
ADDI it depends on its operands. TargetInstrInfo::isTriviallyReMaterializable
will call TargetInstrInfo::isReallyTriviallyReMaterializable, which in turn
calls TargetInstrInfo::isReallyTriviallyReMaterializableGeneric. We rely on
the logic in the latter to pick out instances of ADDI that really are
rematerializable.
The isReMaterializable flag does make a difference on a variety of test
programs. The recently committed remat.ll test case demonstrates how stack
usage is reduce and a unnecessary lw/sw can be removed. Stack usage in the
Proc0 function in dhrystone reduces from 192 bytes to 112 bytes.
For the sake of completeness, this patch also implements
RISCVRegisterInfo::isConstantPhysReg. Although this is called from a number of
places, it doesn't seem to result in different codegen for any programs I've
thrown at it. However, it is called in the rematerialisation codepath and it
seems sensible to implement something correct here.
Differential Revision: https://reviews.llvm.org/D46182
llvm-svn: 332617
entries to reach the target. Since these calls don't require type checks,
we can short-circuit them to their real targets.
Differential Revision: https://reviews.llvm.org/D46326
llvm-svn: 332610
Data directives such as .word, .half, .hword are currently parsed using
HexagonAsmParser::ParseDirectiveValue which effectively duplicates logic from
AsmParser::parseDirectiveValue. This patch deletes that duplicated logic in
favour of using addAliasForDirective.
Differential Revision: https://reviews.llvm.org/D46999
llvm-svn: 332607
Summary:
Require DominatorTree when requiring/preserving LoopInfo in the old pass manager
BreakCriticalEdges tries to keep LoopInfo and DominatorTree updated if they
exist. However, since commit r321653 and r321805, to update LoopInfo we
must have a DominatorTree, or we will hit an assert.
To fix this we now make a couple of passes that only required/preserved
LoopInfo also require DominatorTree.
This solves PR37334.
Reviewers: eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D46829
llvm-svn: 332583
The existing comment said that the functions were available only
on GNU/Linux (and on certain Android versions), but only checked
T.isGNUEnvironment() which also is true on MinGW (for arch-windows-gnu
triplets), which doesn't have such functions.
Existing checks in the initialize function in TargetLibraryInfo.cpp
also use only T.isOSLinux() to check for glibc features.
This fixes use of stdio on MinGW.
Differential Revision: https://reviews.llvm.org/D47002
llvm-svn: 332581
Summary:
The verifier accepts PHI nodes with multiple entries for the
same basic block, as long as the value is the same.
As seen in PR37203, SROA did not handle such PHI nodes properly
when speculating loads over the PHI, since it inserted multiple
loads in the predecessor block and changed the PHI into having
multiple entries for the same basic block, but with different
values.
This patch teaches SROA to reuse the same speculated load for
each PHI duplicate entry in such situations.
Resolves: https://bugs.llvm.org/show_bug.cgi?id=37203
Reviewers: uabelho, chandlerc, hfinkel, bkramer, efriedma
Reviewed By: efriedma
Subscribers: dberlin, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D46426
llvm-svn: 332577
The current integer widening does not support rewriting partial split slices in rewriteIntegerStore (and rewriteIntegerLoad).
This patch adds explicit checks for this case in isIntegerWideningViableForSlice.
Before r322533, splitting is allowed only for the whole-alloca slice and hence the above case is implicitly rejected by another check `if (DL.getTypeStoreSize(ValueTy) > Size)` because whole-alloca slice is larger than the partition.
Differential Revision: https://reviews.llvm.org/D46750
llvm-svn: 332575
These directives are recognised by gas. Support is added through the use of
addAliasForDirective.
Also match RISC-V gcc in preferring .half and .word for 16-bit and 32-bit data
directives.
llvm-svn: 332574
The FIXME comments were about preventing load folding to avoid a partial xmm update. But these instructions use GPR as input when the load isn't folded. This won't help prevent a partial xmm update.
llvm-svn: 332573
r332057 introduced distance() for ranges. Based on post-commit feedback,
this renames distance() to size(). The new size() is also only enabled
when the operation is O(1).
Differential Revision: https://reviews.llvm.org/D46976
llvm-svn: 332551
Summary:
Same as r332530, move WasmSymbol::dump to an implementation file to avoid linker
issues when the dump function is seen in the header, doesn't get eliminated, and
then linking fails because of the missing dependency.
<rdar://problem/40258137>
Reviewers: sbc100, ncw, paquette, vsk, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D46985
llvm-svn: 332542
VSOs now track dependencies for materializing symbols. Each symbol must have its
dependencies registered with the VSO prior to finalization. Usually this will
involve registering the dependencies returned in
AsynchronousSymbolQuery::ResolutionResults for queries made while linking the
symbols being materialized.
Queries against symbols are notified that a symbol is ready once it and all of
its transitive dependencies are finalized, allowing compilation work to be
broken up and moved between threads without queries returning until their
symbols fully safe to access / execute.
Related utilities (VSO, MaterializationUnit, MaterializationResponsibility) are
updated to support dependence tracking and more explicitly track responsibility
for symbols from the point of definition until they are finalized.
llvm-svn: 332541
Summary:
r332305 added a use of llvm::wasm::toString in llvm::object::WasmSymbol::print,
which is in a header file. It also moves toString to BinaryFormat. This has the
unintended side-effect that any inclusion of Object/Wasm.h now relies on
toString, and needs to required_libraries = BinaryFormat. Thankfully most builds
don't fail with this because print just isn't used and gets eliminated, dropping
the required dependency in the process. Not all builds are so lucky.
Fix this issue by moving print to the corresponding .cpp file.
<rdar://problem/40258137>
Reviewers: sbc100, ncw, paquette
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D46977
llvm-svn: 332530
This breaks the code which saves and restores LR, so we can't outline
without doing something more complicated for stack adjustment.
Found by inspection; we get lucky in most cases because getMemOpInfo
only handles STRWpost, not any other pre/post-increment forms. But it
hits a couple of artificial testcases in the tree.
Differential Revision: https://reviews.llvm.org/D46920
llvm-svn: 332529
As suggested by Fabian on PR37441, use PSHUFLW to extend shift amount types for use with PSRAD/PSRLD to reduce register pressure.
Some of this ideally would be done by combineTargetShuffle but its tricky to do as most of the shuffles are sharing inputs.
Differential Revision: https://reviews.llvm.org/D46959
llvm-svn: 332524
The getAtom() method wasn't doing what we needed in all cases. We want
the symbols for the function which defines that section. We can compute
this easily enough and we know that we have at most one function in each
section.
Once this lands I will revert rL331412 which is no longer needed.
Fixes PR37409
Differential Revision: https://reviews.llvm.org/D46970
llvm-svn: 332517
The cost computation assumes we do this correctly, but the actual
lowering was wrong.
Differential Revision: https://reviews.llvm.org/D46923
llvm-svn: 332514
Summary:
This is needed for the continuation of D46504,
to be able to store the timings.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46939
llvm-svn: 332506
Summary:
This is needed for the continuation of D46504,
to be able to store the timings.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46938
llvm-svn: 332505
Summary:
Although this is not stricly required, i would very much prefer
not to have known random precision losses along the way.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: george.karpenkov
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46937
llvm-svn: 332504
Summary: We have just used `.sys` suffix for the previous timer, this is clearly a typo
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46936
llvm-svn: 332503
As i64 types are not legal on 32-bit targets, insert these into a suitable zero vector and use the packed vXi64<->FP conversion instructions instead.
Fixes PR3163.
Differential Revision: https://reviews.llvm.org/D43441
llvm-svn: 332498
Summary:
Before this patch, signal handling wasn't signal safe. This leads to real-world
crashes. It used ManagedStatic inside of signals, this can allocate and can lead
to unexpected state when a signal occurs during llvm_shutdown (because
llvm_shutdown destroys the ManagedStatic). It also used cl::opt without custom
backing storage. Some de-allocation was performed as well. Acquiring a lock in a
signal handler is also a great way to deadlock.
We can't just disable signals on llvm_shutdown because the signals might do
useful work during that shutdown. We also can't just disable llvm_shutdown for
programs (instead of library uses of clang) because we'd have to then mark the
pointers as not leaked and make sure all the ManagedStatic uses are OK to leak
and remain so.
Move all of the code to lock-free datastructures instead, and avoid having any
of them in an inconsistent state. I'm not trying to be fancy, I'm not using any
explicit memory order because this code isn't hot. The only purpose of the
atomics is to guarantee that a signal firing on the same or a different thread
doesn't see an inconsistent state and crash. In some cases we might miss some
state (for example, we might fail to delete a temporary file), but that's fine.
Note that I haven't touched any of the backtrace support despite it not
technically being totally signal-safe. When that code is called we know
something bad is up and we don't expect to continue execution, so calling
something that e.g. sets errno is the least of our problems.
A similar patch should be applied to lib/Support/Windows/Signals.inc, but that
can be done separately.
Fix r332428 which I reverted in r332429. I originally used double-wide CAS
because I was lazy, but some platforms use a runtime function for that which
thankfully failed to link (it would have been bad for signal handlers
otherwise). I use a separate flag to guard the data instead.
<rdar://problem/28010281>
Reviewers: dexonsmith
Subscribers: steven_wu, llvm-commits
llvm-svn: 332496
As part of merging stores we check that fusing the nodes does not
cause a cycle due to one candidate store being indirectly dependent on
another store (this may happen via chained memory copies). This is
done by searching if a store is a predecessor to another store's
value.
Prune the search at the candidate search's root node which is a
predecessor to all candidate stores. This reduces the
size of the subgraph searched in large basic blocks.
Reviewers: jyknight
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46955
llvm-svn: 332490
For regular SVE vector operands, this patch introduces a more
sensible diagnostic when the vector has a wrong suffix (e.g. z0.s vs z0.b).
For example:
add z0.s, z1.s, z2.b -> invalid element width
^_____^
mismatch
For the vector-with-shift/extend (e.g. z0.s, uxtw #2) this patch takes
a slightly different approach and instead returns a 'invalid operand'
if the element size is not as expected. This is because the diagnostics
are more specificied to suggest using the right shift/extend suffix. This
is a trade-off not to introduce more operand classes and still provide
useful diagnostics for LD1 and PRF instructions.
For example:
ld1w z1.s, p0/z, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw)'
ld1w z1.d, p0/z, [x0, z0.s] -> invalid operand
^________________^
mismatch
For gather prefetches, both 'z0.s' and 'z0.d' would be allowed:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw) #2'
prfw #0, p0, [x0, z0.d] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Without this change, the diagnostic would unnecessarily suggest a
different element size:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Reviewers: SjoerdMeijer, aemerson, fhahn, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D46688
llvm-svn: 332483
Keep loads and stores together (target defines how many loads
and stores to gang up), such that it will help in pairing
and vectorization.
Differential Revision https://reviews.llvm.org/D46477
llvm-svn: 332482
The canonicalization was restricted to shuffle masks with
a 1-to-1 mapping to the constant vector, but that disqualifies
the common splat pattern. This is part of solving PR37463:
https://bugs.llvm.org/show_bug.cgi?id=37463
llvm-svn: 332479
Summary:
A recent patch ([[ https://reviews.llvm.org/rL331587 | rL331587 ]]) to Capture Tracking taught it that the `launder_invariant_group` intrinsic captures its argument only by returning it. Unfortunately, BasicAA still considered every call instruction as a possible escape source and hence concluded that the result of a `launder_invariant_group` call cannot alias any local non-escaping value. This led to [[ https://bugs.llvm.org/show_bug.cgi?id=37458 | bug 37458 ]].
This patch updates the relevant check for escape sources in BasicAA.
Reviewers: Prazek, kuhar, rsmith, hfinkel, sanjoy, xbolva00
Reviewed By: hfinkel, xbolva00
Subscribers: JDevlieghere, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46900
llvm-svn: 332466
Summary: If file stream arg is not captured and source is fopen, we could replace IO calls by unlocked IO ("_unlocked" function variants) to gain better speed,
Reviewers: efriedma, RKSimon, spatel, sanjoy, hfinkel, majnemer, lebedev.ri, rja
Reviewed By: rja
Subscribers: rja, srhines, efriedma, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D45736
llvm-svn: 332452
A lot of the models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332451
So that it can be shared with other passes that may end up doing the same
thing.
Differential Revision: https://reviews.llvm.org/D45874
llvm-svn: 332450
We currently handle all aggregates by creating one large LLT, and letting the
legalizer deal with splitting them up. However using this approach means that
we can't support big endian code correctly.
This patch changes the way that the IRTranslator deals with aggregate values,
by splitting them up into their constituent element values. To do this, parts
of the translator need to be modified to deal with multiple VRegs for a single
Value.
A new Value to VReg mapper is introduced to help keep compile time under
control, currently there is no measurable impact on CTMark despite the extra
code being generated in some cases.
Patch is based on the original work of Tim Northover.
Differential Revision: https://reviews.llvm.org/D46018
llvm-svn: 332449
Add support for this target hook, covering MIPS, microMIPS and MIPSR6, along
with some tests. Also add missing getOppositeBranchOpc() cases exposed by the
tests.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46794
llvm-svn: 332446
This patch re-introduces the "S" inline assembler constraint. This matches
an absolute symbolic address or a label reference. The primary use case is
asm("adrp %0, %1\n\t"
"add %0, %0, :lo12:%1" : "=r"(addr) : "S"(&var));
I say re-introduces as it seems like "S" was implemented in the original
AArch64 backend, but it looks like it wasn't carried forward to the merged
backend. The original implementation had A and L modifiers that could be
used to print ":lo12:" to the string. It looks like gcc doesn't use these
and :lo12: is expected to be written in the inline assembly string so I've
not implemented A and L. Clang already supports the S modifier.
Fixes PR37180
Differential Revision: https://reviews.llvm.org/D46745
llvm-svn: 332444
Summary:
SelectionDAGLegalize::ExpandNode() inserts an ISD::MUL when lowering a
BR_JT opcode. While many backends optimize this multiply into a shift, e.g.
the MIPS backend currently always lowers this into a sequence of
load-immediate+multiply+mflo in MipsSETargetLowering::lowerMulDiv().
I initially changed the multiply to a shift in the MIPS backend but it
turns out that would not have handled the MIPSR6 case and was a lot more
code than doing it in LegalizeDAG.
I believe performing this simple optimization in LegalizeDAG instead of
each individual backend is the better solution since this also fixes other
backeds such as MSP430 which calls the multiply runtime function
__mspabi_mpyi without this patch.
Reviewers: sdardis, atanasyan, pftbest, asl
Reviewed By: sdardis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45760
llvm-svn: 332439
A catchswitch must be the only non-phi instruction in its basic block;
attempting to move a retain or release into a catchswitch basic block
will result in invalid IR. Explicitly mark a CFG hazard in this case to
prevent the code motion.
Differential Revision: https://reviews.llvm.org/D46482
llvm-svn: 332430
Summary:
Before this patch, signal handling wasn't signal safe. This leads to real-world
crashes. It used ManagedStatic inside of signals, this can allocate and can lead
to unexpected state when a signal occurs during llvm_shutdown (because
llvm_shutdown destroys the ManagedStatic). It also used cl::opt without custom
backing storage. Some de-allocation was performed as well. Acquiring a lock in a
signal handler is also a great way to deadlock.
We can't just disable signals on llvm_shutdown because the signals might do
useful work during that shutdown. We also can't just disable llvm_shutdown for
programs (instead of library uses of clang) because we'd have to then mark the
pointers as not leaked and make sure all the ManagedStatic uses are OK to leak
and remain so.
Move all of the code to lock-free datastructures instead, and avoid having any
of them in an inconsistent state. I'm not trying to be fancy, I'm not using any
explicit memory order because this code isn't hot. The only purpose of the
atomics is to guarantee that a signal firing on the same or a different thread
doesn't see an inconsistent state and crash. In some cases we might miss some
state (for example, we might fail to delete a temporary file), but that's fine.
Note that I haven't touched any of the backtrace support despite it not
technically being totally signal-safe. When that code is called we know
something bad is up and we don't expect to continue execution, so calling
something that e.g. sets errno is the least of our problems.
A similar patch should be applied to lib/Support/Windows/Signals.inc, but that
can be done separately.
<rdar://problem/28010281>
Reviewers: dexonsmith
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46858
llvm-svn: 332428
The instructions using registers should be DBG_VALUE and normal
instructions. Use isDebugValue() to filter out DBG_VALUE and add
an assert to ensure there is no other kind of debug instructions
using the registers.
Differential Revision: https://reviews.llvm.org/D46739
Patch by Hsiangkai Wang.
llvm-svn: 332427
It doesn't matter much this late in the pipeline, but one place that
does check for it is the function alignment code.
Differential Revision: https://reviews.llvm.org/D46373
llvm-svn: 332415
It is legal for the type passed to isLegalAddressingMode to be
unsized or, more specifically, VoidTy. In this case, we must
check the legality of load / stores for all legal types. Directly
trying to call getTypeStoreSize is incorrect, and leads to breakage
in e.g. Loop Strength Reduction. This change guards against that
behaviour.
Differential Revision: https://reviews.llvm.org/D40405
llvm-svn: 332409
WasmObjectWriter mostly operates with function segments offsets that do
not include their size fields. WasmObjectFile needs to have and provide
this information to the lld to maintain proper
R_WEBASSEMBLY_FUNCTION_OFFSET_I32 relocations entries.
Patch by Yury Delendik
Differential Revision: https://reviews.llvm.org/D46763
llvm-svn: 332406
Author: Samuel Pitoiset
Without this patch, it appears to me that we are selecting
the wrong operand when inverting conditions. In the attached
test, it will select %tmp3 instead of %tmp4. To fix it, just
use 'A' as everywhere.
This fixes a regression introduced by
"[PatternMatch] define m_Not using m_Xor and cst_pred_ty"
https://reviews.llvm.org/D46351
llvm-svn: 332403
When storing the 0th lane of a vector, use a simpler and usually more
efficient scalar store instead. In this case, also using the unscaled
offset.
Differential revision: https://reviews.llvm.org/D46762
llvm-svn: 332394
search. NFCI.
Migrate single-use and non-volatility, non-indexed requirements on
stores of immediate store values to candidate collection pass from
later stage.
llvm-svn: 332392
specially handle SETB_C* pseudo instructions.
Summary:
While the logic here is somewhat similar to the arithmetic lowering, it
is different enough that it made sense to have its own function.
I actually tried a bunch of different optimizations here and none worked
well so I gave up and just always do the arithmetic based lowering.
Looking at code from the PR test case, we actually pessimize a bunch of
code when generating these. Because SETB_C* pseudo instructions clobber
EFLAGS, we end up creating a bunch of copies of EFLAGS to feed multiple
SETB_C* pseudos from a single set of EFLAGS. This in turn causes the
lowering code to ruin all the clever code generation that SETB_C* was
hoping to achieve. None of this is needed. Whenever we're generating
multiple SETB_C* instructions from a single set of EFLAGS we should
instead generate a single maximally wide one and extract subregs for all
the different desired widths. That would result in substantially better
code generation. But this patch doesn't attempt to address that.
The test case from the PR is included as well as more directed testing
of the specific lowering pattern used for these pseudos.
Reviewers: craig.topper
Subscribers: sanjoy, mcrosier, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46799
llvm-svn: 332389
Summary:
After r332167 we started to sort the IDF blocks inside IDF calculation, so
there is no need to re-sort them on the user site. The test changes are due to
a slightly different order we're using now (originally we used DFSInNumber and
now the blocks are sorted by a pair (LevelFromRoot, DFSInNumber)).
Reviewers: dberlin, mgrang
Subscribers: Prazek, hiraditya, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D46899
llvm-svn: 332385
BtVer2 - Fixes schedules for (V)CVTPS2PD instructions
A lot of the Intel models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332376
This is a simple hack based on what's proposed in D37686, but we can extend it if needed in follow-ups.
It gets us most of the FMF functionality that we want without adding any state bits to the flags. It
also intentionally leaves out non-FMF flags (nsw, etc) to minimize the patch.
It should provide a superset of the functionality from D46563 - the extra tests show propagation and
codegen diffs for fcmp, vecreduce, and FP libcalls.
The PPC log2() test shows the limits of this most basic approach - we only applied 'afn' to the last
node created for the call. AFAIK, there aren't any libcall optimizations based on the flags currently,
so that shouldn't make any difference.
Differential Revision: https://reviews.llvm.org/D46854
llvm-svn: 332358
Btver2 - VCVTPH2PSYrm needs to double pump the AGU
Broadwell - missing VCVTPS2PH*mr stores extra latency
Allows us to remove the WriteCvtF2FSt conversion store class
llvm-svn: 332357
This is a resubmit of r331868 (D46583), which was reverted due to
failures on the PS4 bot.
These have been resolved with r332246/D46748.
llvm-svn: 332349
When two interposable functions are merged, we cannot replace
uses and have to emit calls to a common internal function. However,
writeThunk() will not actually emit a thunk if the function is too
small. This leaves us in a broken state where mergeTwoFunctions
already rewired the functions, but writeThunk doesn't do anything.
This patch changes the implementation so that:
* writeThunk() does just that.
* The direct replacement of calls is moved into mergeTwoFunctions()
into the non-interposable case only.
* isThunkProfitable() is extracted and will be called for
the non-iterposable case always, and in the interposable case
only if uses are still left after replacement.
This issue has been introduced in https://reviews.llvm.org/D34806,
where the code for checking thunk profitability has been moved.
Differential Revision: https://reviews.llvm.org/D46804
Reviewed By: whitequark
llvm-svn: 332342
Summary:
New unsigned saturation downconvert patterns detection was implemented in
X86 Codegen:
(truncate (smin (smax (x, C1), C2)) to dest_type),
where C1 >= 0 and C2 is unsigned max of destination type.
(truncate (smax (smin (x, C2), C1)) to dest_type)
where C1 >= 0, C2 is unsigned max of destination type and C1 <= C2.
These two patterns are equivalent to:
(truncate (umin (smax(x, C1), unsigned_max_of_dest_type)) to dest_type)
Reviewers: RKSimon
Subscribers: llvm-commits, a.elovikov
Differential Revision: https://reviews.llvm.org/D45315
llvm-svn: 332336
As requested in D46858, pulling this function into its own lambda makes it
easier to read that part of the code and reason as to what's going on because
the scope it can be called from is extremely limited. We want to keep it as a
function because it's called from the two subsequent lines.
llvm-svn: 332325
1. Deine FeatureRelax to enable/disable linker relaxation.
2. Define shouldForceRelocation to preserve relocation types even if the fixup
can be resolved when linker relaxation enabled. This is necessary for
correctness as offsets may change during relaxation.
Differential Revision: https://reviews.llvm.org/D46674
llvm-svn: 332318
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
Summary:
bugpoint has several options specified as `PositionalEatArgs` to pass
options through to the underlying tool, e.g. `-tool-args`. The `-help`
message suggests the usage is: `-tool-args=<string>`. However, this is
misleading, because that's not how these arguments work. Rather than taking
a value, the option consumes all positional arguments until the next
recognized option (or all arguments if `--` is specified at some point).
To make this slightly clearer, instead print the help as:
```
-tool-args <string>... - <tool arguments>...
```
Additionally, add an error if the user attempts to use a `PositionalEatArgs`
argument with a value, instead of silently ignoring it. Example:
```
./bin/bugpoint -tool-args=-mpcu=skylake-avx512
bugpoint: for the -tool-args option: This argument does not take a value.
Instead, it consumes any positional arguments until the next recognized option.
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D46787
llvm-svn: 332311
Summary:
Part of the InstCombine code for simplifying GEPs looks through
addrspacecasts. However, this was done by updating a variable
also used by the next transformation, for marking GEPs as
inbounds. This led to replacing a GEP with a similar instruction
in a different addrspace, which caused an assertion failure in RAUW.
This caused julia issue https://github.com/JuliaLang/julia/issues/27055
Patch by Jeff Bezanson <jeff@juliacomputing.com>
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D46722
llvm-svn: 332302
Summary:
In https://bugs.llvm.org/show_bug.cgi?id=37006 Nico Weber points out a
flaw in `OptTable::findNearest`: if an option "foo"'s prefixes are "--"
and "-", then the nearest option for "--fob" will be "-foo". This is
incorrect, however, since the function is expected to return "--foo".
The bug is due to a naive loop that attempts to predetermines which
prefix is best. Instead, compute the edit distance for each prefix/name
pair.
Test Plan: `check-llvm`
Reviewers: thakis
Reviewed By: thakis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46776
llvm-svn: 332299
Extract information related to a "unit header" from DWARFUnit into a
new DWARFUnitHeader class, and add a DWARFUnit member for the header.
This is one step in the direction of allowing type units in the
.debug_info section for DWARF v5.
Differential Revision: https://reviews.llvm.org/D46707
llvm-svn: 332289
Summary:
The BranchFolding pass is currently missing opportunities to hoist
common code if the hoisted-to block contains a single conditional branch
that has register uses. This occurs somewhat frequently on AArch64 with
CBZ/TBZ opcodes.
This change also eliminates some code differences when debug info is
present since the presence of e.g. DBG_VALUE instructions in the
hoisted-to block can enable hoisting that wouldn't have occurred without
them.
Reviewers: MatzeB, rnk, kparzysz, twoh, aprantl, javed.absar
Subscribers: kristof.beyls, JDevlieghere, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46324
llvm-svn: 332265
xsrqpi is currently using Z23Form_1.
The instruction format is xsrqpi R,VRT,VRB,RMC.
Rathar than bits 11-15 being used for FRA, it should have
bits 11-14 reserved and bit 15 for R. This patch adds a new
class Z23Form_4 to fix the instruction format.
Differential Revision: https://reviews.llvm.org/D46761
llvm-svn: 332253
When storing the 0th lane of a vector, use a simpler and usually more efficient scalar store instead.
Differential revision: https://reviews.llvm.org/D46655
llvm-svn: 332251
Summary:
If we are not emitting a linkage name in the .debug_info sections, we
should not add it into the index either. This makes sure our index is
consistent with the actual debug info.
I am also explicitly setting the --dwarf-linkage-names=All in the
name-collsions test as that one would now fail on targets where this
defaults to "Abstract" (in fact, it would have failed already if there
wasn't a bug in the DWARF verifier, which I fix as well).
Reviewers: probinson, aprantl, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46748
llvm-svn: 332246
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
The first foray into merging debug info into the echo tests.
- Add bindings to Module::getModuleFlagsMetadata() in the form of LLVMCopyModuleFlagsMetadata
- Add the opaque type LLVMModuleFlagEntry to represent Module::ModuleFlagEntry
- Add accessors for LLVMModuleFlagEntry's behavior, key, and metadata node.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46792
llvm-svn: 332219
This pass is
a) broken.
b) r600 specific.
Fixing (a) is a bit more non-trivial, but fixing (b)
is easy. Move this pass to being R600 only for now.
This pass does pass all the unit tests, however clang
no longer generates code that looks like the unit test
input, so fixing the pass requires fixing the tests and
the pass as one, and checking it works with clang still.
Patch by Dave Airlie
llvm-svn: 332196
Summary:
As reported in PR37264, in some cases the X86 Domain Reassignment
`runOnMachineFunction()` is called twice. Because it only deletes the
`.second` members of its `InstrConverterBaseMap`, and does not clean up
the map itself, this can lead to double frees and crashes.
Use `DeleteContainerSeconds()` instead, so the `Converters` map can
safely be reinitialized and its members re-deleted for each X86 Domain
Reassignment pass.
Reviewers: guyblank, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46425
llvm-svn: 332176
Summary:
r271558 moved getManagedStaticMutex's mutex from a function-local
static to using call_once, but left a comment added in r211424. That comment is
now erroneous, remove it.
Reviewers: zturner, chandlerc
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46784
llvm-svn: 332175
Summary:
Currently the order of blocks returned by `IDF::calculate` can be
non-deterministic. This was discovered in several attempts to enable
SSAUpdaterBulk for JumpThreading (which led to miscompare in bootstrap between
stage 3 and stage4). Originally, the blocks were put into a priority queue with
a depth level as their key, and this patch adds a DFSIn number as a second key
to specify a deterministic order across blocks from one level.
The solution was suggested by Daniel Berlin.
Reviewers: dberlin, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46646
llvm-svn: 332167
We cannot query this attribute from a subtarget given a machine function.
At this point attribute itself is already unavailable and can only be
obtained through MFI.
Differential Revision: https://reviews.llvm.org/D46781
llvm-svn: 332166
There's only one use of this currently, but that could
change with D46563. Either way, we shouldn't have to
update code outside of the flags struct when those
flag definitions change.
llvm-svn: 332155
This is a CodeExtractor improvement which adds support for extracting blocks
which have exception handling constructs if that is legal to do. CodeExtractor
performs validation checks to ensure that extraction is legal when it finds
invoke instructions or EH pads (landingpad, catchswitch, or cleanuppad) in
blocks to be extracted.
I have also added an option to allow extraction of blocks with alloca
instructions, but no validation is done for allocas. CodeExtractor caller has
to validate it himself before allowing alloca instructions to be extracted.
By default allocas are still not allowed in extraction blocks.
Differential Revision: https://reviews.llvm.org/D45904
llvm-svn: 332151
Summary:
We have no logic to promote alloca to vector for an AddrSpaceCast instruction.
Reviewer:
arsenm
Differential Revision:
https://reviews.llvm.org/D45993
llvm-svn: 332147
Let separate-const-offset-from-gep pass handle trunc() when it calculates
constant offset relative to base. The pass itself may insert trunc()
instructions when it canonicalises array indices to pointer-size integers
and needs to handle trunc() in order to evaluate the offset.
Differential Revision: https://reviews.llvm.org/D46732
llvm-svn: 332142
Remove a useless SwitchSection which also causes compilation failure
when IR contains comdat.
The SwitchSection is useless because the current section is already
correct text section for the function therefore no need to switch.
It causes compilation failure for comdat because functions with comdat
has specific text section, not the default .text section.
Since HIP uses comdat, this bug caused failures for HIP.
Differential Revision: https://reviews.llvm.org/D46770
llvm-svn: 332137
Summary:
This change adds handling of the atomic memset intrinsic to the
code path that simplifies the regular memset. In practice this means
that we will now also expand a small constant-length atomic memset
into a single unordered atomic store.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46660
llvm-svn: 332132
ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).
Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.
ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.
This was suggested by Adrian in https://reviews.llvm.org/D45995.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46216
llvm-svn: 332119
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
Part of the logic for combining (zext (load ...)) and (sext (load ...))
is duplicated. This creates problems because bugs in one version have to
be fixed again in the other version.
To address this, as a first step, I've extracted the duplicate logic
into a helper. I'll fix the debug location bug in the helper and
eliminate the copy of its logic in a followup.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46157
llvm-svn: 332117
These directives allow the 'C' (compressed) extension to be enabled/disabled
within a single file.
Differential Revision: https://reviews.llvm.org/D45864
Patch by Kito Cheng
llvm-svn: 332107
If the sprintf function is static (as on mingw-w64, where many stdio
functions are static inline wrappers), earlier optimization passes
could optimize out the return value altogether, and make it void,
which could break optimizations of this libcall that touch the
return value.
This fixes the issue discussed in PR37408 for the sprintf function.
Differential Revision: https://reviews.llvm.org/D46752
llvm-svn: 332106
Summary:
performPostLD1Combine in AArch64ISelLowering looks for vector
insert_vector_elt of a loaded value which it can optimize into a single
LD1LANE instruction. The code checking for the pattern was not checking
if the lane index was a constant which could cause two problems:
- an assert when lowering the LD1LANE ISD node since it assumes an
constant operand
- an assert in isel if the lane index value depends on the
post-incremented base register
Both of these issues are avoided by simply checking that the lane index
is a constant.
Fixes bug 35822.
Reviewers: t.p.northover, javed.absar
Subscribers: rengolin, kristof.beyls, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46591
llvm-svn: 332103
Phi nodes can reside in live blocks but one of their incoming
arguments can come from a dead block. Dead blocks and reassociate
don't play nice together. In fact, reassociate performs an RPO
as a first step to avoid processing dead blocks.
The reason why Reassociate might not fixpoint when examining
dead blocks is that the following:
%xor0 = xor i16 %xor1, undef
%xor1 = xor i16 %xor0, undef
is perfectly valid LLVM IR (if it appears in a dead block),
so the worklist algorithm keeps pushing the two instructions for
reexamination. Note that this is not Reassociate fault, at least
not entirely. It's llvm that has a weird definition of dominance.
Fixes PR37390.
llvm-svn: 332100
Confirmed by both Agner and Intel's AOM - the IEC/FPC are not required for pure load/stores (even if its a partial update).
Can't fix WriteStore until all RMW instructions are cleaned up though....
llvm-svn: 332096
Summary:
This change reworks the handling of atomic memcpy within the instcombine pass.
Previously, a constant length atomic memcpy would be lowered into loads & stores
as long as no more than 16 load/store pairs are created. This is quite different
from the lowering done for a non-atomic memcpy; which only ever lowers into a single
load/store pair of no more than 8 bytes. Larger constant-sized memcpy calls are
expanded to load/stores in later passes, such as SelectionDAG lowering.
In this change the behaviour for atomic memcpy is unified with non-atomic memcpy;
atomic memcpy is now treated in the same was as non-atomic memcpy has always been.
We leave it to later passes to lower longer-length atomic memcpy calls.
Due to the structure of the pass's handling of memtransfer intrinsics, this change
also gives us handling of atomic memmove that we did not previously have.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46658
llvm-svn: 332093
losesInfo would be left unset when no conversion needs to be done. A
caller such as InstCombine's fitsInFPType would then branch on an
uninitialized value.
Caught using valgrind on an out-of-tree target.
Differential Revision: https://reviews.llvm.org/D46645
llvm-svn: 332087
Summary:
https://bugs.llvm.org/show_bug.cgi?id=34897 demonstrates an incorrect
coroutine frame allocation elision in the coro-elide pass. The elision
is performed on the basis that the SSA variables from all llvm.coro.begin
are directly referenced in subsequent llvm.coro.destroy instructions.
However, this ignores the fact that the function may exit through paths
that do not run these destroy instructions. In the sample program from
PR34897, for example, the llvm.coro.destroy instruction is only
executed in exception handling code. When the coroutine function exits
normally, llvm.coro.destroy is not called. Eliding the allocation in
this case causes a subsequent reference to the coroutine handle from
outside of the function to access freed memory.
To fix the issue, when finding an llvm.coro.destroy for each llvm.coro.begin,
only consider llvm.coro.destroy that are executed along non-exceptional paths.
Test Plan:
1. Download the sample program from
https://bugs.llvm.org/show_bug.cgi?id=34897, compile it with
`clang++ -fcoroutines-ts -stdlib=libc++ -std=c++1z -O2`, and run it.
It should print `"run1\ncheck1\nrun2\ncheck2"` and then exit
successfully.
2. Compile https://godbolt.org/g/mCKfnr and confirm it is still
optimized to a single instruction, 'return 1190'.
3. `check-llvm`
Reviewers: rsmith, GorNishanov, eric_niebler
Reviewed By: GorNishanov
Subscribers: andrewrk, lewissbaker, EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D43242
llvm-svn: 332077
Summary:
Add documentation for the LLVM Support functions `openFileForWrite` and
`openFileForRead`. The `openFileForRead` parameter `RealPath`, in
particular, I think warranted some explanation.
In addition, make the behavior of the functions more consistent across
platforms. Prior to this patch, Windows would set or not set the result
file descriptor based on the nature of the error, whereas Unix would
consistently set it to `-1` if the open failed. Make Windows
consistently set it to `-1` as well.
Test Plan:
1. `ninja check-llvm`
2. `ninja docs-llvm-html`
Reviewers: zturner, rnk, danielmartin, scanon
Reviewed By: danielmartin, scanon
Subscribers: scanon, danielmartin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46499
llvm-svn: 332075
Summary:
Ship kNetBSD_ShadowOffset32 set to 1ULL << 30.
This is prepared for the amd64 kernel runtime.
Sponsored by <The NetBSD Foundation>
Reviewers: vitalybuka, joerg, kcc
Reviewed By: vitalybuka
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46724
llvm-svn: 332069
We found current sampleFDO had a performance issue when triaging a regression.
For a callsite with inline instance in the profile, even if hot callsite inliner
cannot inline it, it may still execute enough times and should not be treated as
cold in regular inliner later. However, currently if such callsite is not inlined
by hot callsite inliner, and the BB where the callsite locates doesn't get
samples from other instructions inside of it, the callsite will have no profile
metadata annotated. In regular inliner cost analysis, if the callsite has no
profile annotated and its caller has profile information, it will be treated as
cold.
The fix changes the isCallsiteHot check and chooses to compare
CallsiteTotalSamples with hot cutoff value computed by ProfileSummaryInfo.
Differential Revision: https://reviews.llvm.org/D45377
llvm-svn: 332058
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
The bitwidth of the operation should always be wider than the result width of the truncate since we don't recurse through any width changing operations.
llvm-svn: 332055
This implements a new table-gen emitter to create tables for
a wasm disassembler, and a dissassembler to use them.
Comes with 2 tests, that tests a few instructions manually. Is also able to
disassemble large .wasm files with objdump reasonably.
Not working so well, to be addressed in followups:
- objdump appears to be passing an incorrect starting point.
- since the disassembler works an instruction at a time, and it is
disassembling stack instruction, it has no idea of pseudo register assignments.
These registers are required for the instruction printing code that follows.
For now, all such registers appear in the output as $0.
Patch by Wouter van Oortmerssen
Differential Revision: https://reviews.llvm.org/D45848
llvm-svn: 332052
Clang's codegen now uses 128-bit masked load/store intrinsics in IR. The backend will widen to 512-bits on AVX512F targets.
So this patch adds patterns to detect codegen's widening and patterns for AVX512VL that don't get widened.
We may be able to drop some of the old patterns, but I leave that for a future patch.
llvm-svn: 332049
This reverts commit SVN r331889, which could trigger failed
assertions for cases where the snprintf function is declared
with a vaguely differing signature (e.g. being defined as
static inline), see PR37408.
llvm-svn: 332043
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
length excluding the table header. Instead it must encode the contribution length minus the length
field itself.
Reviewer: JDevliegehere
Differential Revision: https://reviews.llvm.org/D45922
llvm-svn: 332030
Accessing the members of a large data structures needs a lot of GEPs which
usually have large offsets due to the size of the underlying data structure. If
the offsets are too large to fit into the r+i addressing mode, these GEPs cannot
be sunk to their users' blocks and many extra registers are needed then to carry
the values of these GEPs.
This patch tries to split a large data struct starting from %base like the
following.
Before:
BB0:
%base =
BB1:
%gep0 = gep %base, off0
%gep1 = gep %base, off1
%gep2 = gep %base, off2
BB2:
%load1 = load %gep0
%load2 = load %gep1
%load3 = load %gep2
After:
BB0:
%base =
%new_base = gep %base, off0
BB1:
%new_gep0 = %new_base
%new_gep1 = gep %new_base, off1 - off0
%new_gep2 = gep %new_base, off2 - off0
BB2:
%load1 = load i32, i32* %new_gep0
%load2 = load i32, i32* %new_gep1
%load3 = load i32, i32* %new_gep2
In the above example, the struct is split into two parts. The first part still
starts from %base and the second part starts from %new_base. After the
splitting, %new_gep1 and %new_gep2 have smaller offsets and then can be sunk to
BB2 and folded into their users.
The algorithm to split data structure is simple and very similar to the work of
merging SExts. First, it collects GEPs that have large offsets when iterating
the blocks. Second, it splits the underlying data structures and updates the
collected GEPs to use smaller offsets.
Differential Revision: https://reviews.llvm.org/D42759
llvm-svn: 332015
Summary:
- Adds getters for the line, column, and scope of a DILocation
- Adds getters for the name, size in bits, offset in bits, alignment in bits, line, and flags of a DIType
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46627
llvm-svn: 332014
These symbols only get included in the output symbols table if
they are used in a relocation.
This behaviour matches more closely the ELF object writer.
Differential Revision: https://reviews.llvm.org/D46561
llvm-svn: 332005
This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
With nnan, there's no need for the masked merge / blend
sequence (that probably costs much more than the min/max
instruction).
Somewhere between clang 5.0 and 6.0, we started producing
these intrinsics for fmax()/fmin() in C source instead of
libcalls or fcmp/select. The backend wasn't prepared for
that, so we regressed perf in those cases.
Note: it's possible that other targets have similar problems
as seen here.
Noticed while investigating PR37403 and related bugs:
https://bugs.llvm.org/show_bug.cgi?id=37403
The IR FMF propagation cases still don't work. There's
a proposal that might fix those cases in D46563.
llvm-svn: 331992
Summary:
This change teaches DSE that the atomic memory intrinsics can be overwriten
partially in the same way as the non-atomic forms. Specifically, that the
atomic memcpy & memset can be shortened at the end and that the atomic memset
can be shortened at the beginning, if they partially overwritten
by later stores.
Reviewers: mkazantsev, skatkov, apilipenko, efriedma, rsmith, spatel, filcab, sanjoy
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45584
llvm-svn: 331991
Fixes bug https://bugs.llvm.org/show_bug.cgi?id=37339.
InlineAsm is only uniqued if the FunctionTypes are exactly the
same, while cmpTypes() for example considers all pointer types
in the default address space to be the same. For this reason
the end of cmpInlineAsm() can be reached.
This patch replaces the unreachable assertion with a check that
the function types are not identical.
Differential Revision: https://reviews.llvm.org/D46495
Reviewers: jfb
llvm-svn: 331990
Summary:
The combine in rebuildSetCC may be combined to another
node leaving our references stale. Keep a handle on
it to avoid stale references.
Fixes PR36602.
Reviewers: dbabokin, RKSimon, eli.friedman, davide
Subscribers: hiraditya, uabelho, JesperAntonsson, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D46404
llvm-svn: 331985
The print format was causing at least 2 unit-test failures from r331971.
The signed/unsigned comparison warnings only appeared to affect two lines but
it was unclear whether it might just pop up on other lines, so I have been
explicit in all the literals in the tests.
There were other bot unit-test failures that I am still investigating.
llvm-svn: 331978
Summary:
Operand 0 is the condition, not the true value.
Use op 1 and op 2 as the correct values.
Reviewers: george.burgess.iv, nlopes, efriedma
Reviewed By: george.burgess.iv
Subscribers: craig.topper, rjmccall, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D46343
llvm-svn: 331976
Put in a conservatively correct estimate for now. Avoids miscompiling
clang in FDO mode. This is really tricky to trigger in reality as
basically all interesting cases will be folded away by computeKnownBits
earlier, I was unable to find a reasonably small test case.
llvm-svn: 331975
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
During simplification umax we trigger isKnownPredicate twice. As a first attempt it
tries the induction. To do that it tries to get post increment of SCEV.
Re-writing the SCEV may result in simplification of umax. If the SCEV contains a lot
of umax operations this recursion becomes very slow.
The added test demonstrates the slow behavior.
To resolve this we use only simple ways to check whether the predicate is known.
Reviewers: sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: lebedev.ri, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46046
llvm-svn: 331949
Const/local/shared address spaces are all < 4GB and we can always use
32-bit pointers to access them. This has substantial performance impact
on kernels that uses shared memory for intermediary results.
The feature is disabled by default.
Differential Revision: https://reviews.llvm.org/D46147
llvm-svn: 331941
This is a follow-up to D45986. As suggested there, we should match the "all-bits-set"
pattern in addition to "any-bits-set".
This was a little more complicated than I thought it would be initially because the
"and 1" instruction can be anywhere in the chain. Hopefully, the code comments make
that logic understandable, but if you see a way to simplify or improve that, it's
most appreciated.
This transforms patterns that emerge from bitfield tests as seen in PR37098:
https://bugs.llvm.org/show_bug.cgi?id=37098
I think it would also help reduce the large test from:
D46336
D46595
but we need something to reassociate that case to the forms we're expecting here first.
Differential Revision: https://reviews.llvm.org/D46649
llvm-svn: 331937
The previous handling for guard widening in InstCombine was extremely restrictive. In particular, it didn't handle the common case where we had two guards separated by a single icmp. Handle this by scanning through a small fixed window of instructions to find the next guard if needed.
Differential Revision: https://reviews.llvm.org/D46203
llvm-svn: 331935
This is safe as long as the udiv is not exact. The pattern is not common in
C++ code, but comes up all the time in code generated by XLA's GPU backend.
Differential Revision: https://reviews.llvm.org/D46647
llvm-svn: 331933
Summary: As per title. SETCCE is deprecated and will eventually be removed.
Reviewers: rogfer01, efriedma, rengolin, javed.absar
Subscribers: kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D46512
llvm-svn: 331929
The second source operand of G_SHL, G_ASHR, and G_LSHR must preserve its
value as a (small) unsigned integer, therefore its incorrect to widen it
in any way but by zero extending it.
G_SHL was using G_ANYEXT and G_ASHR - G_SEXT (which is correct for their
destination and first source operands, but not the "number of bits to
shift" operand).
Generally, shifts aren't as similar to regular binary operations as it
might seem, for instance, they aren't commutative nor associative and
the second source operand usually requires a special treatment.
Reviewers: bogner, javed.absar, aivchenk, rovka
Reviewed By: bogner
Subscribers: igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46413
llvm-svn: 331926
If a multiply is truncated, SimplifyDemandedBits
sometimes turns a zero_extend of the inputs into an
any_extend, which makes the known bits computation unhelpful.
Ignore these and compute known bits for the underlying value,
since we insert the correct extend type after.
llvm-svn: 331919
This is an extension of an existing combine to reduce wider
shls if the result fits in the final result type. This
introduces the same combine, but reduces the shift to a middle
sized type to avoid the slow 64-bit shift.
llvm-svn: 331916
If the truncate is only accessing the first element of the vector,
we can use the original source value.
This helps with some combine ordering issues after operations are
lowered to integer operations between bitcasts of build_vector.
In particular it stops unnecessarily materializing the unused
top half of a vector in some cases.
llvm-svn: 331909
Previously if !LegalOperations we would blindly call getBitcast and hope that getNode would constant fold it. But if the conversion is between a vector and a scalar, getNode has no simplification.
This means we would just get back the original N. We would then return that N which would make the caller of visitBITCAST think that we used CombineTo and did our own worklist management. This prevents target specific optimizations from being called for vector/scalar bitcasts until after legal operations.
llvm-svn: 331896
The previous value of 8192 resulted in severe compile time hits in
some pathological cases.
rdar://39781410
Differential Revision: https://reviews.llvm.org/D46581
llvm-svn: 331888
Summary:
Unnormal values are a feature of some very old x87 processors. We handle
them correctly for the most part -- the only exception was an unnormal
value whose significand happened to be zero. In this case the APFloat
was still initialized as normal number (category = fcNormal), but a
subsequent toString operation would assert because the math would
produce nonsensical values for the zero significand.
During review, it was decided that the correct way to fix this is to
treat all unnormal values as NaNs (as that is what any >=386 processor
will do).
The issue was discovered because LLDB would crash when trying to print
some "long double" values.
Reviewers: skatkov, scanon, gottesmm
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41868
llvm-svn: 331884
Summary:
Various path functions were not treating paths consisting of slashes
alone consistently. For example, the iterator-based accessors decomposed the
path "///" into two elements: "/" and ".". This is not too bad, but it
is different from the behavior specified by posix:
```
A pathname that contains ***at least one non-slash character*** and that
ends with one or more trailing slashes shall be resolved as if a single
dot character ( '.' ) were appended to the pathname.
```
More importantly, this was different from how we treated the same path
in the filename+parent_path functions, which decomposed this path into
"." and "". This was completely wrong as it lost the information that
this was an absolute path which referred to the root directory.
This patch fixes this behavior by making sure all functions treat paths
consisting of (back)slashes alone the same way as "/". I.e., the
iterator-based functions will just report one component ("/"), and the
filename+parent_path will decompose them into "/" and "".
A slightly controversial topic here may be the treatment of "//". Posix
says that paths beginning with "//" may have special meaning and indeed
we have code which parses paths like "//net/foo/bar" specially. However,
as we were already not being consistent in parsing the "//" string
alone, and any special parsing for it would complicate the code further,
I chose to treat it the same way as longer sequences of slashes (which
are guaranteed to be the same as "/").
Another slight change of behavior is in the parsing of paths like
"//net//". Previously the last component of this path was ".". However,
as in our parsing the "//net" part in this path was the same as the
"drive" part in "c:\" and the next slash was the "root directory", it
made sense to treat "//net//" the same way as "//net/" (i.e., not to add
the extra "." component at the end).
Reviewers: zturner, rnk, dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45942
llvm-svn: 331876
With custom lowering for vector MULLH{S,U}, it is now profitable to
vectorize a divide by constant loop for the custom types (v16i8, v8i16,
and v4i32). The cost if based on TargetLowering::Build{S,U}DIV which
uses a multiply by constant plus adjustment to express a divide by
constant.
Both {u,s}mull{2} are expressed as Instruction::Mul and shifts by
Instruction::AShr.
llvm-svn: 331873
The new verifier check has found an error in the
debug-names-name-collisions.ll test on the PS4 bot:
error: Name Index @ 0x0: Entry @ 0xdc: mismatched Name of DIE @ 0x23: index - _ZN3foo3fooE; debug_info - foo.
Reverting while I investigate whether this is a bug in the verifier or
the generator.
This reverts commit r331868.
llvm-svn: 331869
Summary:
This patch implements a check which makes sure all entries required by
the DWARF v5 specification are present in the Name Index. The algorithm
tries to follow the wording of Section 6.1.1.1 of the spec as closely as
possible.
The main deviation from it is that instead of a whitelist-based approach
in the spec "The name index must contain an entry for each debugging
information entry that defines a named subprogram, label, variable,
type, or namespace" I chose a blacklist-based one, where I consider
everything to be "in" and then remove the entries that don't make sense.
I did this because it has more potential for catching interesting cases
and the above is a bit vague (it uses plain words like "variable" and
"subprogram", but the rest of the section speaks about specific TAGs).
This approach has raised some interesting questions, the main one being
whether enumerator values should be indexed. The consensus seems to be
that they should, although it does not follow from section 6.1.1.1.
For the time being I made the verifier ignore these, as LLVM does not do
this yet, and I wanted to get a clean run when verifying generated debug
info.
Another interesting case was the DW_TAG_imported_declaration. It was not
immediately clear to me whether this should go in or not, but currently
it is not indexed, and (unlike the enumerators) in does not seem to cause
problems for LLDB, so I've also ignored it.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46583
llvm-svn: 331868
MOVNTPD/MOVNTPS should be WriteFStore
Standardized BDW/HSW/SKL/SKX WriteFStore/WriteVecStore - fixes some missed instregex patterns. (V)MASKMOVDQU was already using the default, its costs gets increased but is still nowhere near the real cost of that nasty instruction....
llvm-svn: 331864
The operator == used for exporting a function with a different
name in the DLL compared to the name in the import library
(which is useful for adding linker level aliases for function
in the import library) is a feature distinct and different from
the operator = used for exporting a function with a different
name (both in import library and DLL) than in the implementation
producing the DLL.
When creating an import library using dlltool, from a def file that
contains forwards (Func = OtherDll.Func), this shouldn't affect the
produced import library, which should still behave just as if it
was a normal exported function.
This clears a lot of confusion and subtle misunderstandings, and
avoids a parameter that was used to avoid creating weak aliases
when invoked from lld. (This parameter was added previously due to
the existing conflation of the two features.)
Differential Revision: https://reviews.llvm.org/D46245
llvm-svn: 331859
Summary:
MergedLoadStoreMotion::mergeStores is using some heuristics
to limit the amount of stores that it tries to sink (see
MagicCompileTimeControl in MergedLoadStoreMotion.cpp). The
heuristic involves counting the number of instructions in
one of the basic blocks that is part of the transformation.
We now ignore dbg intrinsics when counting instruction for
the MagicCompileTimeControl heuristic. This to make sure that
the amount of stores that are sunk doesn't depend on the amount
of debug information (if -g is used or not).
Reviewers: Gerolf, davide, majnemer
Reviewed By: davide
Subscribers: dberlin, bjope, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46600
llvm-svn: 331852
Reverting this to see if the clang-cmake-aarch64-global-isel and
clang-cmake-aarch64-quick bots are failing because of this commit.
We know it wasn't r331819.
llvm-svn: 331846
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
In order to convert LLVM IR to MachineInstr, we need a new TargetOpcode,
DBG_LABEL, to ‘lower’ intrinsic llvm.dbg.label. The patch
creates this new TargetOpcode and convert intrinsic llvm.dbg.label to
MachineInstr through SelectionDAG.
In SelectionDAG, debug information is stored in SDDbgInfo. We create a
new data member of SDDbgInfo for labels and use the new data member,
SDDbgLabel, to create DBG_LABEL MachineInstr.
The new DBG_LABEL MachineInstr uses label metadata from LLVM IR as its
parameter. So, the backend could get metadata information of labels from
DBG_LABEL MachineInstr.
Differential Revision: https://reviews.llvm.org/D45341
Patch by Hsiangkai Wang.
llvm-svn: 331842
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Previously thumb bits were only checked for external relocations (thumb to arm
code and vice-versa). This patch adds detection for thumb callees in the same
section asthe (also thumb) caller.
The MachO/Thumb test case is updated to cover this, and redundant checks
(handled by the MachO/ARM test) are removed.
llvm-svn: 331838
Summary:
The current LowerInvoke pass cannot handle invoke instructions with a
funclet bundle operand. The order of operands for an invoke instruction
is {call arguments, callee, funclet operand (if any), normal dest,
unwind dest}. The current code assumes there is no funclet operand and
incorrectly includes a funclet operand into call arguments.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46242
llvm-svn: 331832
We enter MergeBlockIntoPredecessor with a block looking like this:
for.inc.us-lcssa: ; preds = %cond.end
%k.1.lcssa.ph = phi i32 [ %conv15, %cond.end ]
%t.3.lcssa.ph = phi i32 [ %k.1.lcssa.ph, %cond.end ]
br label %for.inc, !dbg !66
[note the first arg of the PHI being a PHI].
FoldSingleEntryPHINodes gets rid of both PHIs (calling, eraseFromParent).
But right before we call the function, we push into IncomingValues the
only argument of the PHIs, and shortly after we try to iterate over
something which has been invalidated before :(
The fix its not trying to remove PHIs which have an incoming value
coming from the same BB we're looking at.
Fixes PR37300 and rdar://problem/39910460
Differential Revision: https://reviews.llvm.org/D46568
llvm-svn: 331824
Fix a silly mistake in my pre-commit changes for r331816. It should check what
opcode the insn is before extracting the operands.
NFC at the moment since the caller already checked the opcode.
llvm-svn: 331820
Refactoring LegalizerHelper::widenScalar member function reducing its
size by approximately a factor of 2 and (hopefuly) making it more
straightforward and regular by introducing widenScalarSrc and
widenScalarDst helper methods.
The new widenScalar* methods mutate the instructions in place instead
of recreating them from scratch and removing the originals. The
compile time implications of this were measured on sqlite3
amalgamation, targeting AArch64 in -O0:
LegalizerHelper::widenScalar: > 25% faster
Legalizer::runOnMachineFunction: ~ 4.0 - 4.5% faster
Also adding MachineOperand::setCImm and refactoring out
MachineIRBuilder::recordInsertion methods to make the change possible.
Reviewers: aditya_nandakumar, bogner, javed.absar, t.p.northover, ab, dsanders, arsenm
Reviewed By: aditya_nandakumar
Subscribers: wdng, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46414
llvm-svn: 331819
Before SVN r244158, codeview debug info was emitted always
emitted for msvc if debug info was enabled, but that commit
added a module flag.
Since it's still restricted by the flag, we can allow it
for any target if the user requests it, not only msvc (and
windows-itanium, added in SVN r287567).
Add a test for emitting it for a mingw target.
Differential Revision: https://reviews.llvm.org/D46303
llvm-svn: 331809
Summary:
Don't skip functions with the same name but from different files.
That change makes it possible to generate code coverage reports from
different binaries compiled from different sources even if there are functions
with non-unique names. Without that change, code coverage for such functions is
missing except of the first function processed.
Reviewers: vsk, morehouse
Reviewed By: vsk
Subscribers: llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D46478
llvm-svn: 331801
Summary:
Broadcast code generation emitted instructions in pre-header, while the instruction they are dependent on in the vector loop body.
This resulted in an IL verification error ---- value used before defined.
Reviewers: rengolin, fhahn, hfinkel
Reviewed By: rengolin, fhahn
Subscribers: dcaballe, Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D46302
llvm-svn: 331799
Summary:
AMDGPU stores a numerical code for the particular GPU variant in EFlags
in the ELF file. This commit provides a mapping from that number into
the machine name for use by objdump-type tools.
Change-Id: Id37fc0bebad443bd89c0080985ce298c4e7e9319
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46587
llvm-svn: 331798
Legalize and emit code for truncate and convert float128 to (un)signed short
and (un)signed char.
Differential Revision: https://reviews.llvm.org/D46194
llvm-svn: 331797
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
llvm-svn: 331783
Existing DAG combine only handles conversions for FP_TO_SINT:
"{f32, f64} x { i32, i16 }"
This patch simplifies the code to handle:
"{ FP_TO_SINT, FP_TO_UINT } x { f64, f32 } x { i64, i32, i16, i8 }"
Differential Revision: https://reviews.llvm.org/D46102
llvm-svn: 331778
- Report error for invalid dpp_ctrl values.
- Changed the way it is reported, now the error will be emitted into
asm and will work with release build as well.
- Added dpp_ctrl value verifier for codegen.
- Added symbolic constants for dpp_ctrl.
Differential Revision: https://reviews.llvm.org/D46565
llvm-svn: 331775
Introduced a new pattern for matching splat.d explicitly.
Both splat.d and splati.d can now be generated from the @llvm.mips.splat.d
intrinsic depending on whether an immediate value has been passed.
Differential Revision: https://reviews.llvm.org/D45683
llvm-svn: 331771
This fixes a couple of BtVer2 missing instructions that weren't been handled in the override.
NOTE: There are still a lot of overrides that still need cleaning up!
llvm-svn: 331770
I've created the necessary classes but there are still a lot of overrides that need cleaning up.
NOTE: The Znver1 model was missing some div/idiv variants in the instregex patterns and wasn't setting the resource cycles at all in the overrides.
llvm-svn: 331767
Patch https://reviews.llvm.org/D41445 changed the behaviour of 'isReg()'
to also return 'true' if the parsed register operand is a vector
register. Code in the AsmMatcher checks if a register is a subclass of the
expected register class. However, even though both parsed registers map
to the same physical register, the 'v' register is of kind 'NeonVector',
where 'q' is of type Scalar, where isSubclass() does not distinguish
between the two cases.
The solution is to use an AsmOperand instead of the register directly,
and use the PredicateMethod to distinguish the two operands.
This fixes for example:
ldr v0, [x0] // 'v0' is an invalid operand for this instruction
ldr q0, [x0] // valid
Reviewers: aemerson, Gerolf, SjoerdMeijer, javed.absar
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D46310
llvm-svn: 331755
This is a fix for PR30290: by marking all byval stack slots as being aliased,
the instruction scheduler is more conservative about rescheduling memory
accesses to such stack slots as an LLVM Value* might alias it. This fixes
errors such as in the patched test case, where reads and writes to a data
structure are illegally mixed.
This could be fixed better in the future with better analysis for the
instruction scheduler to know what Values alias what stack slots.
Differential Revision: https://reviews.llvm.org/D45022
llvm-svn: 331749
This patch adds a shadow stack fix when compiling
setjmp/longjmp with the shadow stack enabled. This
allows setjmp/longjmp to work correctly with CET.
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46181
llvm-svn: 331748
The code was previously relying on there being a null terminator
somewhere in (or after) the string table, something made less likely by
r330786.
Differential Revision: https://reviews.llvm.org/D46527
llvm-svn: 331746
Summary:
and use the -msgx flag as a requirement
for the SGX instructions.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D46436
llvm-svn: 331742
Summary:
In formLCSSAForInstructions we speculatively add new PHI
nodes, that sometimes ends up without having any uses. It
has been discovered that sometimes an added PHI node can
appear as being unused in one iteration of the Worklist,
although it can end up being used by a PHI node added in
a later iteration. We now check, a second time, that the
PHI node still is unused before we remove it. This avoids
an assert about "Trying to remove a phi with uses." for the
added test case.
Reviewers: davide, mzolotukhin, mattd, dberlin
Reviewed By: mzolotukhin, dberlin
Subscribers: dberlin, mzolotukhin, davide, bjope, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D46422
llvm-svn: 331741
Making sure we don't truncate / extend pointers, don't try to change
vector topology or bitcast vectors to scalars or back, and most
importantly, don't extend to a smaller type or truncate to a large
one.
Reviewers: qcolombet t.p.northover aditya_nandakumar
Reviewed By: qcolombet
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46490
llvm-svn: 331718
Summary: Makes this consistent with the old PM.
Reviewers: eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D46526
llvm-svn: 331709
MCSymbol has getIndex/setIndex which are implementation defined
and on other platforms are used to store the symbol table
index. It makes sense to use this rather than invent a new
mapping.
Differential Revision: https://reviews.llvm.org/D46555
llvm-svn: 331705
This change causes us to re-run tablegen for every single target on
every single build. This is much, much worse than the problem being
fixed AFAICT.
On my system, it makes a clean rebuild of `llc` with nothing changed go
from .5s to over 8s. On systems with less parallelism, slower file
systems, or high process startup overhead this will be even more
extreme.
The only way I see this could be a win is in clean builds where we churn
the filesystem. But I think incremental rebuild is more important, and
so if we want to re-instate this, it needs to be done in a way that
doesn't trigger constant re-runs of tablegen.
llvm-svn: 331702
Every generic machine instruction must have generic virtual registers
only, that is, have a low-level type attached to each operand.
Previously MachineVerifier would catch a type missing on an operand
only if the previous operand for the the same type index exists and
have a type attached to it and it will report it as a type mismatch.
This is incosistent behaviour and a misleading error message.
This commit makes sure MachineVerifier explicitly checks that the
types are there for every operand and if not provides a
straightforward error message.
Reviewers: qcolombet t.p.northover bogner ab
Reviewed By: qcolombet
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D46455
llvm-svn: 331694
This is an NFC pre-commit for the following "Checking that generic
instrs have LLTs on all vregs" commit.
This overloads MachineOperand::print to make it possible to print LLTs
with standalone machine operands.
This also overloads MachineVerifier::print(...MachineOperand...) with
an optional LLT using the newly introduced MachineOperand::print
variant; no actual calls added.
This also refactors MachineVerifier::visitMachineInstrBefore in the
parts dealing with all generic instructions (checking Selected
property, LLTs, and phys regs).
llvm-svn: 331693
Summary:
Split off from D46031.
The previous patch, D46493, completely disabled unfolding in case of immediates.
But we can do better:
{F6120274} {F6120277}
https://rise4fun.com/Alive/xJS
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46494
llvm-svn: 331685
Summary:
Split off from D46031.
In masked merge case, this degrades IPC by decreasing instruction count.
{F6108777}
The next patch should be able to recover and improve this.
This also affects the transform @spatel have added in D27489 / rL289738,
and the test coverage for X86 was missing.
But after i have added it, and looked at the changes in MCA, i'm somewhat confused.
{F6093591} {F6093592} {F6093593}
I'd say this regression is an improvement, since `IPC` increased in that case?
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: andreadb, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D46493
llvm-svn: 331684
to be needed: jump table sections are created with .cfi.jumptable suffix. With
this change each jump table is placed in a separate section, which allows the
linker to re-order them.
Differential Revision: https://reviews.llvm.org/D46537
llvm-svn: 331680
Split to support single/double for scalar, XMM and YMM/ZMM instructions - removing InstrRW overrides for these instructions.
Fixes Atom ADDSUBPD instruction and reclassifies VFPCLASS as WriteFCmp which is closer in behaviour.
llvm-svn: 331672
Summary:
getNode optimizes (ext (trunc x)) to x and the dbgvalue node on trunc is lost. The fix calls transferDbgValues to add the dbgvalue to x.
Add DebugInfo/AArch64/dbg-value-i16.ll
Patch by Sejong Oh!
Reviewers: aprantl, javed.absar, llvm-commits, vsk
Reviewed By: aprantl, vsk
Subscribers: kristof.beyls, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46348
llvm-svn: 331665
Updated wasm section symbols names to match section name, and ensure all
referenced sections will have a symbol (per DWARF spec v3, Figure 43)
Patch by Yury Delendik!
Differential Revision: https://reviews.llvm.org/D46543
llvm-svn: 331664
These are more like cross-lane shuffles than regular shuffles - we already do this for AVX512 equivalents.
Differential Revision: https://reviews.llvm.org/D46229
llvm-svn: 331659
Remove the old waitcnt pass ( si-insert-waits ), which is no longer maintained
and getting crufty
Differential Revision: https://reviews.llvm.org/D46448
llvm-svn: 331641
Instead of enabling it for non NDEBUG builds, use -verify-cfiinstrs to
run verifier in CFIInstrInserter. It defaults to false.
Differential Revision: https://reviews.llvm.org/D46444
llvm-svn: 331635
Summary:
Previously, all DS ops forced WQM in a pixel shader. That was a hack to
allow for graphics frontends using ds_swizzle to implement explicit
derivatives, on SI/CI at least where DPP is not available. But it forced
WQM for _any_ DS op.
With this commit, DS ops no longer force WQM. Both graphics frontends
(Mesa and LLPC) need to change to issue an explicit llvm.amdgcn.wqm
intrinsic call when calculating explicit derivatives.
The required Mesa change is: "amd/common: use llvm.amdgcn.wqm for
explicit derivatives".
Subscribers: qcolombet, arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D46051
Change-Id: I9b745b626fa91bbd66456e6cf41ee07eeea42f81
llvm-svn: 331633
WriteFRcp/WriteFRsqrt are split to support scalar, XMM and YMM/ZMM instructions.
WriteFSqrt is split into single/double/long-double sizes and scalar, XMM, YMM and ZMM instructions.
This removes all InstrRW overrides for these instructions.
NOTE: There were a couple of typos in the Znver1 model - notably a 1cy throughput for SQRT that is highly unlikely and doesn't tally with Agner.
NOTE: I had to add Agner's numbers for several targets for WriteFSqrt80.
llvm-svn: 331629
Summary:
The legacy VRCPPS/VRSQRTPS instructions aren't available in 512-bit versions. The new increased precision versions are. So we can use those to implement v16f32 reciprocal estimates.
For KNL CPUs we can probably use VRCP28PS/VRSQRT28PS and avoid the NR step altogether, but I leave that for a future patch.
Reviewers: spatel
Reviewed By: spatel
Subscribers: RKSimon, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D46498
llvm-svn: 331606
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch changes the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
Each extending load can be lowered by the legalizer into separate extends
and loads, however a target that supports s1 will need the any-extending
load to extend to at least s8 since LLVM does not represent memory accesses
smaller than 8 bit. The legalizer can widenScalar G_LOAD into an
any-extending load but sign/zero-extending loads need help from something
else like a combiner pass. A follow-up patch that adds combiner helpers for
for this will follow.
The new representation requires that the MMO correctly reflect the memory
access so this has been corrected in a couple tests. I've also moved the
extending loads to their own tests since they are (mostly) separate opcodes
now. Additionally, the re-write appears to have invalidated two tests from
select-with-no-legality-check.mir since the matcher table no longer contains
loads that result in s1's and they aren't legal in AArch64 anymore.
Depends on D45540
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar
Reviewed By: rtereshin
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45541
llvm-svn: 331601
Summary:
Split off form D46031.
It seems we don't want to transform the pattern if the `xor`'s are actually `not`'s.
In vector case, this breaks `andnpd` / `vandnps` patterns.
That being said, we may want to re-visit this `not` handling, maybe in D46073.
Reviewers: spatel, craig.topper, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46492
llvm-svn: 331595
Summary:
This change is necessary for D46464, which will pass -1 as the Task
ID for distributed backends, so that the save temps files don't end
up with "4294967295" in their path. For distributed back ends, when -1
is passed, don't append any Task ID.
An existing test (tools/clang/test/CodeGen/thinlto_backend.ll) will
fail without this change after D46464.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D46488
llvm-svn: 331591
Summary:
launder.invariant.group has the same rules of capturing as
bitcast, gep, etc - the original value is not captured
if the returned pointer is not captured.
With this patch, we mark 40% more functions as noalias when compiling with -fstrict-vtable-pointers;
1078 vs 1778 (39.37%)
Reviewers: sanjoy, davide, nlewycky, majnemer, mehdi_amini
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D32673
llvm-svn: 331587
Summary:
The current code cannot handle register class names like 'i32', which is
a valid register class name in WebAssembly. This patch removes special
handling for integer/scalar/pointer type parsing and treats them as
normal identifiers.
Reviewers: thegameg
Subscribers: jfb, dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45948
llvm-svn: 331586
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
This was exposed by enabling expensive checks, which causes llvm::sort
to sort randomly.
Differential Revision: https://reviews.llvm.org/D45901
llvm-svn: 331573
Summary:
Set setDiagnosticsHotnessRequested before the early exit check for a
diagnostic output file, so that pass remarks with hotness works when
emitting pass remarks to stderr (e.g. via -pass-remarks=.).
Also fix the llvm-lto2 diagnistic handler so that it only calls exit(1)
when the diagnistic is an error type. Otherwise the new test invocation
of llvm-lto2 with -pass-remarks causes it to fail. The new code is
consistent with the diagnostic handler elsewhere (e.g. on the
LLVMContext).
Reviewers: pcc, davide
Subscribers: fhahn, mehdi_amini, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D46387
llvm-svn: 331569
Summary: Providing the glue to map SDNode fast math sub flags to MachineInstr fast math sub flags.
Reviewers: spatel, arsenm, wristow
Reviewed By: spatel
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D46447
llvm-svn: 331567
Computing this property within the existing walk ensures that the cost is linear with the size of the block. If we did this from within isGuaranteedToExecute, it would be quadratic without some very fancy caching.
This allows us to reliably catch a hoistable instruction within a header which may throw at some point *after* our hoistable instruction. It doesn't do anything for non-header cases, but given how common single block loops are, this seems very worthwhile.
llvm-svn: 331557
- Predicate D16 patterns on this new feature
- Added this new feature to gfx900/2/4
Differential Revision: https://reviews.llvm.org/D46366
llvm-svn: 331551
Summary:
When checking if an instruction stores to a given frame index, check
that the instruction can write to memory before looking at the memory
operands list to avoid e.g. DBG_VALUE instructions that reference a
frame index preventing a load from that index from being hoisted.
Reviewers: dblaikie, MatzeB, qcolombet, reames, javed.absar
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46284
llvm-svn: 331549
A catchswitch is both a pad and a terminator, meaning it must be the
only non-phi instruction in its basic block. When we're inserting a
bitcast in the incoming basic block for a phi, if that incoming block is
a catchswitch, we should go up the dominator tree to find a valid
insertion point rather than attempting to insert before the catchswitch
(which would result in invalid IR).
Differential Revision: https://reviews.llvm.org/D46412
llvm-svn: 331548
Summary: Adding support for Fast flags in the SDNode to leverage fast math sub flag usage.
Reviewers: spatel, arsenm, jbhateja, hfinkel, escha, qcolombet, echristo, wristow, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits, rampitec, nhaehnle, tstellar, FarhanaAleen, nemanjai, javed.absar, jbhateja, hfinkel, wdng
Differential Revision: https://reviews.llvm.org/D45710
llvm-svn: 331547
Summary: They are not consistent with other microarchitectures.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D46434
llvm-svn: 331532
And eliminatw the duplication of those instructions for microMIPS32r6.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D46117
llvm-svn: 331526
This patch adds a custom lowering for ISD::MULH{S,U} used on divide by
constant optimization (DAGCombiner::BuildSDIV and DAGCombiner::BuildUDIV).
New patterns for smull and umull are added, so AArch64ISD::{S,U}MULL
can be correctly lowered to smull2 and umull2.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D46009
llvm-svn: 331522
Split off from SchedWriteFAdd for fp rounding/bit-manipulation instructions.
Fixes an issue on btver2 which only had the ymm version using the JSTC pipe instead of JFPA.
llvm-svn: 331515
Summary:
Added a helper method in RegsForValue to get a list with
all the <RegNumber, RegSize> pairs that we want to iterate
over in SelectionDAGBuilder::EmitFuncArgumentDbgValue and
in SelectionDAGBuilder::visitIntrinsicCall.
Reviewers: vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46360
llvm-svn: 331510
Don't assume the alias of a defined reg is always already in the set.
As the test case in https://bugs.llvm.org/show_bug.cgi?id=36587 discovered,
it is wrong to assume that all the aliases of the defined register in the
*current function* is already present in the UsedPhysRegsMask.
This patch changes this so that any definition in the current function of a
phys-reg always results in all its aliases inserted into the set of defined
registers.
Review: Quentin Colombet
https://reviews.llvm.org/D45157
llvm-svn: 331509
Summary:
Using a set is unnecessary here an in some cases (see e.g. PR37277)
takes significant amount of time to just insert values into it. In this
particular case all we need is just to check if we find the block we are
looking for or not.
Reviewers: davide
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46411
llvm-svn: 331502
Two of these are immediately dereferenced on the next line. The other two are passed immediately to the IRBuilder constructor which can't handle a nullptr.
llvm-svn: 331500
These are casts on users of a PHINode to Instruction. I think since PHINode is an Instruction any users would also be Instructions. At least a cast will give us an assertion if its wrong.
llvm-svn: 331498
Summary:
This makes is possible to have R600RegisterInfo and SIRegisterInfo
not inherit from AMDGPURegisterInfo.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D46280
llvm-svn: 331490
The RWMutex implementation depends on config.h macros (specifically
HAVE_PTHREAD_H and HAVE_PTHREAD_RWLOCK_INIT), so we need to be
including it and not just llvm-config.h here or we fall back to a much
slower implementation.
llvm-svn: 331487
Add logic for the special case when a cmp+select can clearly be
reduced to just a bitwise logic instruction, and remove an
over-reaching chunk of general purpose bit magic. The primary goal
is to remove cases where we are not improving the IR instruction
count when doing these select transforms, and in all cases here that
is true.
In the motivating 3-way compare tests, there are further improvements
because we can combine/propagate select values (not sure if that
belongs in instcombine, but it's there for now).
DAGCombiner has folds to turn some of these selects into bit magic,
so there should be no difference in the end result in those cases.
Not all constant combinations are handled there yet, however, so it
is possible that some targets will see more cmov/csel codegen with
this change in IR canonicalization.
Ideally, we'll go further to *not* turn selects into multiple
logic/math ops in instcombine, and we'll canonicalize to selects.
But we should make sure that this step does not result in regressions
first (and if it does, we should fix those in the backend).
The general direction for this change was discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105373.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2017-July/114885.html
Alive proofs for the new bit magic:
https://rise4fun.com/Alive/XG7
Differential Revision: https://reviews.llvm.org/D46086
llvm-svn: 331486
Summary:
constrainOperandRegClass() currently fails if it tries to constrain the
register class of an operand that is defeined with an unallocatable register
class. This patch resolves this by adding a target callback to compute
register constriants in this case.
This is required by the AMDGPU because many of its instructions have source opreands
defined with the unallocatable register classe VS_32 which is a union of two allocatable
register classes VGPR_32 and SReg_32.
Reviewers: dsanders, aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D45991
llvm-svn: 331485
Summary:
Support was added to the regular LTO backend, but not thinBackend.
This patch adds that support.
Reviewers: pcc, davide
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D46376
llvm-svn: 331481
This took a bit of extra work as on Intel targets the old (V)PSLLDrr/(V)PSLLDrm style instructions act differently - I ended up creating WriteVecShiftImm classes for XMM/YMM/ZMM vector shift by immediate and retaining WriteVecShift as the default (used only by MMX) plus WriteVecShiftX/WriteVecShiftY. X86SchedWriteWidths hides most of this thank goodness.
llvm-svn: 331472
Summary:
When we create a fragment expression, and there already is an
old fragment expression, we assert that the new fragment is
within the range for the old fragment.
If for example the old fragment expression says that we
describe bit 10-16 of a variable (Offset=10, Size=6),
and we now want to create a new fragment expression only
describing bit 3-6 of the original value, then the resulting
fragment expression should have Offset=13, Size=3.
The assert is supposed to catch if the resulting fragment
expression is outside the range for the old fragment. However,
it used to verify that the Offset+Size of the new fragment was
smaller or equal than Offset+Size for the old fragment. What
we really want to check is that Offset+Size of the new fragment
is smaller than the Size of the old fragment.
Reviewers: aprantl, vsk
Reviewed By: aprantl
Subscribers: davide, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46391
llvm-svn: 331465
Summary:
This reverts SVN r331441 (reapplies r331337), together with a fix
in to handle an already existing fragment expression in the
dbg.value that must be fragmented due to a split PHI node.
This should solve the problem seen in PR37321, which was the
reason for the revert of r331337.
The situation in PR37321 is that we have a PHI node like this
%u.sroa = phi i80 [ %u.sroa.x, %if.x ],
[ %u.sroa.y, %if.y ],
[ %u.sroa.z, %if.z ]
and a dbg.value like this
call void @llvm.dbg.value(metadata i80 %u.sroa,
metadata !13,
metadata !DIExpression(DW_OP_LLVM_fragment, 0, 80))
The phi node is split into three 32-bit PHI nodes
%30:gr32 = PHI %11:gr32, %bb.4, %14:gr32, %bb.5, %27:gr32, %bb.8
%31:gr32 = PHI %12:gr32, %bb.4, %15:gr32, %bb.5, %28:gr32, %bb.8
%32:gr32 = PHI %13:gr32, %bb.4, %16:gr32, %bb.5, %29:gr32, %bb.8
but since the original value only is 80 bits we need to adjust the size
of the last fragment expression, and with this patch we get
DBG_VALUE debug-use %30:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 0, 32)
DBG_VALUE debug-use %31:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 32, 32)
DBG_VALUE debug-use %32:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 64, 16)
Reviewers: vsk, aprantl, mstorsjo
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46384
llvm-svn: 331464
By default LLVM thinks very large vectors get aligned to their size when
passed across functions. Unfortunately no-one told the ARM backend so it
doesn't trigger stack realignment and so accesses can cause the usual
misalignment issues (e.g. a data abort).
This changes the ABI alignment to the stack alignment, which in practice
(and as a bonus) also coincides with the alignment "natural" vectors get.
llvm-svn: 331451
Also retagged VDBPSADBW instructions as SchedWritePSADBW instead of SchedWriteVecIMul which matches the behaviour on SkylakeServer (the only thing that supports it...)
llvm-svn: 331445
This patch was temporarily reverted because it has exposed bug 37229 on
PowerPC platform. The bug is unrelated to the patch and was just a general
bug in the optimization done for PowerPC platform only. The bug was fixed
by the patch rL331410.
This patch returns the disabled commit since the bug was fixed.
llvm-svn: 331427
These are necessary changes to support building LLVM for Fuchsia.
While these are not sufficient to run on Fuchsia, they are still
useful when cross-compiling LLVM libraries and runtimes for Fuchsia.
Differential Revision: https://reviews.llvm.org/D46345
llvm-svn: 331423
Summary:
Machine Instruction flags for fast math support and MIR print support
Reviewers: spatel, arsenm
Reviewed By: arsenm
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D45781
llvm-svn: 331417
Sinking the and closer to a compare against zero is beneficial on PPC as it
allows us to emit record-form instructions. In the future, we may expand this
to a larger set of operations that feed compares against zero since PPC has
lots of record-form instructions.
Differential revision: https://reviews.llvm.org/D46060
llvm-svn: 331416
This code previously existed only in MCMachOStreamer but is
useful for WebAssembly too. See: D46335
Differential Revision: https://reviews.llvm.org/D46297
llvm-svn: 331412
The CTR loops pass will insert the decrementing branch instruction in an exiting
block for the loop being transformed. However if that block is part of another
loop as well (whether a nested loop or with irreducible CFG), it is not valid
to use that exiting block. In fact, if the loop hass irreducible CFG, we don't
bother analyzing it and we just bail on the transformation. In practice, this
doesn't lead to a noticeable reduction in the number of loops transformed by
this pass.
Fixes https://bugs.llvm.org/show_bug.cgi?id=37229
Differential Revision: https://reviews.llvm.org/D46162
llvm-svn: 331410
Summary:
Prior to this change, LLVM would in some cases emit *massive* writeout
functions with many 10s of 1000s of function calls in straight-line
code. This is a very wasteful way to represent what are fundamentally
loops and creates a number of scalability issues. Among other things,
register allocating these calls is extremely expensive. While D46127 makes this
less severe, we'll still run into scaling issues with this eventually. If not
in the compile time, just from the code size.
Now the pass builds up global data structures modeling the inputs to
these functions, and simply loops over the data structures calling the
relevant functions with those values. This ensures that the code size is
a fixed and only data size grows with larger amounts of coverage data.
A trivial change to IRBuilder is included to make it easier to build
the constants that make up the global data.
Reviewers: wmi, echristo
Subscribers: sanjoy, mcrosier, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D46357
llvm-svn: 331407
Summary:
Some of our internal testing detected a major compile time regression which I've
tracked down to:
r278938 - Revert "Reassociate: Reprocess RedoInsts after each inst".
It appears that processing long chains of reassociatable instructions causes
non-linear (potentially exponential) growth in the number of times an
instruction is revisited. For example, the included test revisits instructions
220 times in a 20-instruction test.
It appears that r278938 reversed the order instructions were visited and that
this is preventing scheduled revisits from being cancelled as a result of
visiting the instructions naturally during normal processing. However, simply
reversing the order also harmed the generated code. Upon closer inspection, it
was discovered that revisits occurred in the opposite order to the first pass
(Thanks to escha for spotting that).
This patch makes the revisit order consistent with the first pass which allows
more revisits to be cancelled. This does appear to have a small impact on the
generated code in few cases but it significantly reduces compile-time.
After this patch, our internal test that was most affected by the regression
dropped from ~2 million revisits to ~4k resulting in Reassociate having 0.46%
of the runtime it had before (99.54% improvement).
Here's the summaries reported by lnt for the LLVM test-suite with --benchmarking-only:
| metric | geomean before patch | geomean after patch | delta |
| ----- | ----- | ----- | ----- |
| compile time | 0.1956 | 0.1261 | -35.54% |
| execution time | 0.3240 | 0.3237 | - |
| code size | 7365.4459 | 7365.6079 | - |
The results have a few wins and losses on compile-time, mostly in the +/- 2.5% range. There was one outlier though:
| Performance Regressions - compile_time | Δ | Previous | Current |
| MultiSource/Benchmarks/ASC_Sequoia/CrystalMk/CrystalMk | 9.82% | 2.0473 | 2.2483 |
Reviewers: javed.absar, dberlin
Reviewed By: dberlin
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45734
llvm-svn: 331381
The size of an object cannot be less than the emitted size of all the
contained elements. This would cause an overflow in padding size
calculation. Add an assert to catch this.
Patch by Suyog Sarda.
llvm-svn: 331376
Summary: performAddCombine should run after DAG is legalized; Otherwise generic optimization
in the DAGCombiner can optimize an addcarry+trunc into an addcarry instruction with
illegal types.
Author: FarhanaAleen
Reviewed By: rampitec
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D46337
llvm-svn: 331368
An input !foreach expression such as !foreach(a, lst, !add(a, 1))
would be re-emitted by llvm-tblgen -print-records with the first
argument in quotes, giving !foreach("a", lst, !add(a, 1)), which isn't
valid TableGen input syntax.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46352
llvm-svn: 331351
Summary:
This is a follow up to rL331182. A PHI node can be split up into
several MIR PHI nodes when being selected. When there is a
dbg.value intrinsic that uses the result of such a PHI node we
need to select several DBG_VALUE instructions, with fragment
expressions, in order to do a correct selection.
Reviewers: rnk, aprantl, vsk
Reviewed By: vsk
Subscribers: mattd, llvm-commits, JDevlieghere, aprantl, gbedwell, rnk
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D46329
llvm-svn: 331337
and (or (lshr X, C), ...), 1 --> (X & C') != 0
I initially thought about implementing the minimal pattern in instcombine as mentioned here:
https://bugs.llvm.org/show_bug.cgi?id=37098#c6
...but we need to do better to catch the more general sequence from the motivating test
(more than 2 bits in the compare). And a test-suite run with statistics showed that this
pattern only happened 2 times currently. It would potentially happen more often if
reassociation worked better (D45842), but it's probably still not too frequent?
This is small enough that I didn't see a need to create a whole new class/file within
AggressiveInstCombine. There are likely other relatively small matchers like what was
discussed in D44266 that would slide under foldUnusualPatterns() (name suggestions welcome).
We could potentially also consolidate matchers for ctpop, bswap, etc under here.
Differential Revision: https://reviews.llvm.org/D45986
llvm-svn: 331311
While running the lit tests for the most recent version of D45916
(https://reviews.llvm.org/D45916), I found that a couple tests for this pass
suddenly started segfaulting. Since the outliner wasn't actually doing anything
to the code in either of these tests I got curious.
I found that the pass doesn’t completely create the machine-level constructs
necessary to actually add a MachineFunction and MachineBasicBlock to the
module. This patch adds in those missing bits. After this, adding the
outliner before this pass won’t cause it to segfault.
You can recreate this behaviour by adding the MachineOutliner directly before
the pass and having it return false immediately.
https://reviews.llvm.org/D46330
llvm-svn: 331307
The logic for this combine is almost identical to the logic for a
(sext (sextload x)) combine.
This commit factors out the logic so it can be shared by both combines,
and corrects the SDLoc assigned in the zext version of the combine.
Prior to this patch, for the given test case, we would apply the
location associated with the udiv instruction to instructions which
perform the load.
Part of: llvm.org/PR37262
llvm-svn: 331303
Prior to this patch, for the given test case, we would apply the
location associated with the sdiv instruction to instructions which
perform the load.
Part of: llvm.org/PR37262.
Differential Revision: https://reviews.llvm.org/D46222
llvm-svn: 331302
In DAGCombiner, we try to simplify this pattern:
([s|z]ext (load ...))
Conceptually, a new extload which is created while splitting the load
should have the same debug location as the load.
Making this change affects the IROrder of the new load, causing some
test case churn.
In practice, the new location is never different from the location of
the [s|z]ext, at least not during check-llvm or a stage2 build.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46156
llvm-svn: 331301
Setting the right SDLoc on a newly-created zextload fixes a line table
bug which resulted in non-linear stepping behavior.
Several backend tests contained CHECK lines which relied on the IROrder
inherited from the wrong SDLoc. This patch breaks that dependence where
feasbile and regenerates test cases where not.
In some cases, changing a node's IROrder may alter register allocation
and spill behavior. This can affect performance. I have chosen not to
prevent this by applying a "known good" IROrder to SDLocs, as this may
hide a more general bug in the scheduler, or cause regressions on other
test inputs.
rdar://33755881, Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D45995
llvm-svn: 331300
LLVM always puts function definition DIEs at the top level, but under
some circumstances GCC does not (at least in this case with member
functions of a function-local type).
To ensure that doesn't appear as though the local type's member function
is unduly inlined within the outer function - ensure the inline
discovery DIE parent walk stops at the first DW_TAG_subprogram.
llvm-svn: 331291
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
This is a fix for PR23997.
The loop vectorizer is not preserving the inbounds property of GEPs that it creates.
This is inhibiting some optimizations. This patch preserves the inbounds property in
the case where a load/store is being fed by an inbounds GEP.
Reviewers: mkuper, javed.absar, hsaito
Reviewed By: hsaito
Subscribers: dcaballe, hsaito, llvm-commits
Differential Revision: https://reviews.llvm.org/D46191
llvm-svn: 331269
phi is on lhs of a comparison op.
For the following testcase,
L1:
%t0 = add i32 %m, 7
%t3 = icmp eq i32* %t2, null
br i1 %t3, label %L3, label %L2
L2:
%t4 = load i32, i32* %t2, align 4
br label %L3
L3:
%t5 = phi i32 [ %t0, %L1 ], [ %t4, %L2 ]
%t6 = icmp eq i32 %t0, %t5
br i1 %t6, label %L4, label %L5
We know if we go through the path L1 --> L3, %t6 should always be true. However
currently, if the rhs of the eq comparison is phi, JumpThreading fails to
evaluate %t6 to true. And we know that Instcombine cannot guarantee always
canonicalizing phi to the left hand side of the comparison operation according
to the operand priority comparison mechanism in instcombine. The patch handles
the case when rhs of the comparison op is a phi.
Differential Revision: https://reviews.llvm.org/D46275
llvm-svn: 331266
The previous version of this patch restricted the 'jal' instruction to MIPS and
microMIPSr3. microMIPS32r6 does not have this instruction and instead uses jal
as an alias for balc.
Original commit message:
> Reviewers: smaksimovic, atanasyan, abeserminji
>
> Differential Revision: https://reviews.llvm.org/D46114
>
llvm-svn: 331259
Without this change, GCC 7 raises the warning below:
control reaches end of non-void function
Reviewers: sbc100, andreadb
Reviewed By: andreadb
Differential Revision: https://reviews.llvm.org/D46304
llvm-svn: 331255
This patch fixes a bug introduced by revision 330778 (originally reviewed at:
https://reviews.llvm.org/D44782), where function isFrameLoadOpcode returned
the wrong number of bytes read for opcodes VMOVSSrm and VMOVSDrm.
This corrects that mistake, and extends the regression test to catch cases where
the dead stores should be removed.
Patch by Jeremy Morse.
Differential Revision: https://reviews.llvm.org/D46256
llvm-svn: 331252
The warning was (introduced in r331220):
lib/MC/WasmObjectWriter.cpp:51:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
llvm-svn: 331251
unswitch and replace it with the amazingly simple update API code.
This addresses piles of FIXMEs around the update logic here and makes
everything substantially simpler.
llvm-svn: 331247
code review.
It turns out this *is* necessary, and I read the comment on the API
correctly the first time. ;]
The `applyUpdates` routine requires that updates are "balanced". This is
in order to cleanly handle cycles like inserting, removing, nad then
re-inserting the same edge. This precludes inserting the same edge
multiple times in a row as handling that would cause the insertion logic
to become *ordered* instead of *unordered* (which is what the API
provides).
It happens that in this specific case nothing (other than an assert and
contract violation) goes wrong because we're never inserting and
removing the same edge. The implementation *happens* to do the right
thing to eliminate redundant insertions in that case.
But the requirement is there and there is an assert to catch it.
Somehow, after the code review I never did another asserts-clang build
testing loop-unswich for a long time. As a consequence, I didn't notice
this despite a bunch of testing going on, but it shows up immediately
with an asserts build of clang itself.
llvm-svn: 331246
Previously for instructions like fxsave we would print "opaque ptr" as part of the memory operand. Now we print nothing.
We also no longer accept "opaque ptr" in the parser. We still accept any size to be specified for these instructions, but we may want to consider only parsing when no explicit size is specified. This what gas does.
llvm-svn: 331243
This appears to have some issues associated with the file directive output
causing multiple global symbols with the name "file" to be emitted into a
startup section. I'm investigating more specific causes and working with the
original author.
This reverts commit r330271.
Also Revert "[DEBUGINFO, NVPTX] Add the test for the debug info of the local"
This reverts commit r330592 and the follow up of 330779 as the testcase is dependent upon r330271.
llvm-svn: 331237
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things slightly
simpler and more direct.
Reviewers: aprantl, vsk, hans, danielcdh
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D46252
llvm-svn: 331221
Dead defs were being removed from the live set (in stepForward), but
registers clobbered by regmasks weren't (more specifically, they were
actually removed by removeRegsInMask, but then they were added back in).
llvm-svn: 331219
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things slightly
simpler and more direct.
Reviewers: aprantl, vsk, chandlerc
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D46253
llvm-svn: 331217
No need to waste space nor number MBBs differently if MF gets recreated.
Reviewers: qcolombet, stoklund, t.p.northover, bogner, javed.absar
Reviewed By: qcolombet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46078
llvm-svn: 331213
We need to split most of the scheduler classes by vector width to remove more of the InstRW overrides, this patch should make this easier/tidier by allowing us to pass the X86SchedWriteWidths wrapper to multi-width multiclasses and then split as required.
I've included fields for Scl (scalar float/double), MMX (MMX integer), XMM, YMM and ZMM widths. These fields mostly share the same classes but it should give us the flexibility that we may need in the future.
This patch has replaced a set of example SSE/AVX512 instruction cases but isn't exhaustive as it gets very noisy before we really need the functionality.
Differential Revision: https://reviews.llvm.org/D46266
llvm-svn: 331208
Summary:
As discussed in D45733, we want to do this in InstCombine.
https://rise4fun.com/Alive/LGk
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: chandlerc, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D45867
llvm-svn: 331205
This provides an optimized implementation of SADDO/SSUBO/UADDO/USUBO
as well as ADDCARRY/SUBCARRY on top of the new CC implementation.
In particular, multi-word arithmetic now uses UADDO/ADDCARRY instead
of the old ADDC/ADDE logic, which means we no longer need to use
"glue" links for those instructions. This also allows making full
use of the memory-based instructions like ALSI, which couldn't be
recognized due to limitations in the DAG matcher previously.
Also, the llvm.sadd.with.overflow et.al. intrinsincs now expand to
directly using the ADD instructions and checking for a CC 3 result.
llvm-svn: 331203
Currently, an instruction setting the condition code is linked to
the instruction using the condition code via a "glue" link in the
SelectionDAG. This has a number of drawbacks; in particular, it
means the same CC cannot be used by multiple users. It also makes
it more difficult to efficiently implement SADDO et. al.
This patch changes the back-end to represent CC dependencies as
normal values during SelectionDAG matching, along the lines of
how this is handled in the X86 back-end already.
In addition to the core mechanics of updating all relevant patterns,
this requires a number of additional changes:
- We now need to be able to spill/restore a CC value into a GPR
if necessary. This means providing a copyPhysReg implementation
for moves involving CC, and defining getCrossCopyRegClass.
- Since we still prefer to avoid such spills, we provide an override
for IsProfitableToFold to avoid creating a merged LOAD / ICMP if
this would result in multiple users of the CC.
- combineCCMask no longer requires a single CC user, and no longer
need to be careful about preventing invalid glue/chain cycles.
- emitSelect needs to be more careful in marking CC live-in to
the basic block it generates. Also, we can now optimize the
case of multiple subsequent selects with the same condition
just like X86 does.
llvm-svn: 331202
There are two separate fixes here:
* The lowering code for non-extending loads should report UnableToLegalize instead of emitting the same instruction.
* The target should not be requesting lowering of non-extending loads.
llvm-svn: 331201
This prevents infinite recursion in DWARFDie::findRecursively for
malformed DWARF where a DIE references itself.
This fixes PR36257.
Differential revision: https://reviews.llvm.org/D43092
llvm-svn: 331200
In patterns where we need to specify a result VT, prefer
[(set (tr.vt tr.op:$V1), (operator ...))]
over
[(set tr.op:$V1, (tr.vt (operator ...)))]
This is NFC now, but simplifies some future changes.
llvm-svn: 331192
If we have LOCR instructions, select them directly from SelectionDAG
instead of first going through a pseudo instruction and then using
the custom inserter to emit the LOCR.
Provide Select pseudo-instructions for VR32/VR64 if we have vector
instructions, to avoid having to go through the first 16 FPRs
unnecessarily.
If we do not have LOCFHR, prefer using LOCR followed by a move
over a conditional branch.
llvm-svn: 331191
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
This patch will introduce copying of DBG_VALUE instructions
from an otherwise empty basic block to predecessor/successor
blocks in case the empty block is eliminated/bypassed. It
is currently only done in one identified situation in the
BranchFolding pass, before optimizing on empty block.
It can be seen as a light variant of the propagation done
by the LiveDebugValues pass, which unfortunately is executed
after the BranchFolding pass.
We only propagate (copy) DBG_VALUE instructions in a limited
number of situations:
a) If the empty BB is the only predecessor of a successor
we can copy the DBG_VALUE instruction to the beginning of
the successor (because the DBG_VALUE instruction is always
part of the flow between the blocks).
b) If the empty BB is the only successor of a predecessor
we can copy the DBG_VALUE instruction to the end of the
predecessor (because the DBG_VALUE instruction is always
part of the flow between the blocks). In this case we add
the DBG_VALUE just before the first terminator (assuming
that the terminators do not impact the DBG_VALUE).
A future solution, to handle more situations, could perhaps
be to run the LiveDebugValues pass before branch folding?
This fix is related to PR37234. It is expected to resolve
the problem seen, when applied together with the fix in
SelectionDAG from here: https://reviews.llvm.org/D46129
Reviewers: #debug-info, aprantl, rnk
Reviewed By: #debug-info, aprantl
Subscribers: ormris, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46184
llvm-svn: 331183
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things
slightly simpler and more direct.
Reviewers: mkuper, rengolin, dcaballe, aprantl, vsk
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D46254
llvm-svn: 331174
The PMAXSD/PMINSD instregexs had been written as PMAX(C?)SD - looks like this was a search+replace error when matching float MAXSD/MINSD commutative instructions.
llvm-svn: 331167
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
This patch extends the 'isSVEVectorRegWithShiftExtend' function to
improve diagnostics for SVE's gather load (scalar + vector) addressing
modes. Instead of always suggesting the 'unscaled' addressing mode,
the use of DiagnosticPredicate enables a more specific error message
in the context where the scaling is incorrect. For example:
ld1h z0.d, p0/z, [x0, z0.d, lsl #2]
^
shift amount should be '1'
Instead of suggesting the packed, unscaled addressing mode:
expected 'z[0..31].d, (uxtw|sxtw)'
the assembler now suggests using the proper scaling:
expected 'z[0..31].d, (lsl|uxtw|sxtw) #1'
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D46124
llvm-svn: 331162
The instructions have predicates of Not64BitMode, but there are identical strings in InstAliases that have Mode32Bit and Mode16Bit. But the ordering is uncontrolled and the less specific Not64BitMode was ordered first.
This patch hides the Not64BitMode from the table so there is no conflict anymore.
llvm-svn: 331158
These aliases are used to default the memory forms of call and jmp to the size of the operating mode. This doesn't work for Intel syntax. We have a different hack in the AsmParser code itself to force a size on unsized memory operands.
llvm-svn: 331153
Most of the add<operandname>Operands() functions are the same
and can be replaced by using a single 'RenderMethod' in
the AArch64InstrFormats.td file. Since many of the scaled
immediates (with different scaling/bits) are the same, most of
these can reuse the same AsmOperandClass.
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D46122
llvm-svn: 331146
Summary:
This is a follow up to D45420 (included here since it is still under review and this change is dependent on that) and D45072 (committed).
Actual change for this patch is LoopVectorize* and cmakefile. All others are all from D45420.
LoopVectorizationLegality is an analysis and thus really belongs to Analysis tree. It is modular enough and it is reusable enough ---- we can further improve those aspects once uses outside of LV picks up.
Hopefully, this will make it easier for people familiar with vectorization theory, but not necessarily LV itself to contribute, by lowering the volume of code they should deal with. We probably should start adding some code in LV to check its own capability (i.e., vectorization is legal but LV is not ready to handle it) and then bail out.
Reviewers: rengolin, fhahn, hfinkel, mkuper, aemerson, mssimpso, dcaballe, sguggill
Reviewed By: rengolin, dcaballe
Subscribers: egarcia, rogfer01, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D45552
llvm-svn: 331139
This allows the instruction selection to follow mode in Intel syntax. And allows a suffix to be used to change size.
This matches gas behavior from what I could tell.
llvm-svn: 331138
It doesn't really exist. The instruction always writes 16-bits of memory. Putting a REX.w on it won't change anything.
While I was touching the encoding tests to remove it, I added some other missing register form test cases.
llvm-svn: 331135
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Many of these aliases exist to give one syntax or the other a slightly different mnemonic and the other variant gets a duplicate of its normal mnemonic
This patch restricts a lot of these to only one variant so we don't get the duplication.
This removes a lot of duplicate entries from the matcher table. It also reduces the number of warnings printed when you enable the ambiguous match warning in tablegen.
llvm-svn: 331117
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch begins changing the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
This patch introduces the new generic instructions and new variation on
G_LOAD and adds lowering for them to convert back to the existing
representations.
Depends on D45466
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, aemerson, javed.absar
Reviewed By: aemerson
Subscribers: aemerson, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45540
llvm-svn: 331115
Summary:
* rL328953 does not include bindings for LLVMDIBuilderCreateClassType and LLVMDIBuilderCreateBitFieldMemberType despite declaring their prototypes. Provide these bindings now.
* Switch to more precise types with specific numeric limits matching the DIBuilder's C++ API.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46168
llvm-svn: 331114
Summary:
Masked merge has a pattern of: `((x ^ y) & M) ^ y`.
But, there is no difference between `((x ^ y) & M) ^ y` and `((x ^ y) & ~M) ^ x`,
We should canonicalize the pattern to non-inverted mask.
https://rise4fun.com/Alive/Yol
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45664
llvm-svn: 331112
These instruction don't use their memory operands as normal memory operands. They're just used as addresses. They don't have a size because they aren't directly representing a load or store.
llvm-svn: 331104
Favor the 0x1a encoding for register/register move to match gas.
The instructions used RM and MR in their name along with rr/rm/mr at the end. To make more consistent with other instructions remove the RM/MR and use rr/rm/mr/rr_REV.
Hide the _REV encoding from the assembler but leave it for the disassembler.
llvm-svn: 331101
The invocation of getExact in ScalarEvolution::getBackedgeTakenInfo is used
only for getting statistic and for assert.
Even if statistics is disabled, the code related to it will be eliminated
the invocation to getExact itself will not be eliminated
because it may have side-effects like creation of new SCEVs.
So do invocation only when we collect statistics or executes asserts.
Reviewers: mkazantsev, sanjoy, javed.absar
Reviewed By: javed.absar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46178
llvm-svn: 331099
This commit makes it so that if you outline a def of some register, then the
call instruction created by the outliner actually reflects that the register
is defined by the call. It also makes it so that outlined functions don't
have the TracksLiveness property.
Outlined calls shouldn't break liveness assumptions that someone might make.
This also un-XFAILs the noredzone test, and updates the calls test.
llvm-svn: 331095
The effect of doing so is not disrupting the LoopPassManager when mixing this pass with other loop passes. This should help locality of access substaintially and avoids the cost of computing PostDom.
The assumption here is that the full GuardWidening (which does use PostDom) is run as a canonicalization before loop opts and that this version is just catching cases exposed by other loop passes. (i.e. LoopPredication, IndVarSimplify, LoopUnswitch, etc..)
llvm-svn: 331094
Summary:
D42479 (rL329525) enabled SDIV combine for pow2 non-splat vector
dividers. But when there is a 1 in a vector, the instruction sequence to
be generated involves shifting a value by the number of its bit widths,
which is undefined
(c64f4dbfe3/lib/CodeGen/SelectionDAG/DAGCombiner.cpp (L6000-L6006)).
Especially, in architectures that do not support vector instructions,
each of element in a vector will be computed separately using scalar
operations, and then the resulting value will be undef for '1' values
in a vector.
(All 1's vector is fine; only vectors mixed with 1 and others will be
affected.)
Reviewers: RKSimon, jgravelle-google
Subscribers: jfb, dschuff, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D46161
llvm-svn: 331092
Summary:
Previously the flag intrinsics always used the index instructions even if a mask instruction also exists.
To fix fix this I've created a single ISD node type that returns index, mask, and flags. The SelectionDAG CSE process will merge all flavors of intrinsics with the same inputs to a s ingle node. Then during isel we just have to look at which results are used to know what instruction to generate. If both mask and index are used we'll need to emit two instructions. But for all other cases we can emit a single instruction.
Since I had to do manual isel anyway, I've removed the pseudo instructions and custom inserter code that was working around tablegen limitations with multiple implicit defs.
I've also renamed the recently added sse42.ll test case to sttni.ll since it focuses on that subset of the sse4.2 instructions.
Reviewers: chandlerc, RKSimon, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46202
llvm-svn: 331091
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
This reapplies r330970 after fixing an uncovered bug in r331086 and
working around the situation caused by it.
llvm-svn: 331090
Now local value sinking only scans and numbers instructions added
between the current flush point and the last flush point. This ensures
that ISel is overall linear in the size of the BB.
Fixes PR37010 and re-enables local value sinking by default.
llvm-svn: 331087
This patch adds support for fragment expressions
TryToShrinkGlobalToBoolean() which were previously just dropped.
Thanks to Reid Kleckner for providing me a reproducer!
llvm-svn: 331086
Summary:
Currently, we
1. match `LHS` matcher to the `first` operand of binary operator,
2. and then match `RHS` matcher to the `second` operand of binary operator.
If that does not match, we swap the `LHS` and `RHS` matchers:
1. match `RHS` matcher to the `first` operand of binary operator,
2. and then match `LHS` matcher to the `second` operand of binary operator.
This works ok.
But it complicates writing of commutative matchers, where one would like to match
(`m_Value()`) the value on one side, and use (`m_Specific()`) it on the other side.
This is additionally complicated by the fact that `m_Specific()` stores the `Value *`,
not `Value **`, so it won't work at all out of the box.
The last problem is trivially solved by adding a new `m_c_Specific()` that stores the
`Value **`, not `Value *`. I'm choosing to add a new matcher, not change the existing
one because i guess all the current users are ok with existing behavior,
and this additional pointer indirection may have performance drawbacks.
Also, i'm storing pointer, not reference, because for some mysterious-to-me reason
it did not work with the reference.
The first one appears trivial, too.
Currently, we
1. match `LHS` matcher to the `first` operand of binary operator,
2. and then match `RHS` matcher to the `second` operand of binary operator.
If that does not match, we swap the ~~`LHS` and `RHS` matchers~~ **operands**:
1. match ~~`RHS`~~ **`LHS`** matcher to the ~~`first`~~ **`second`** operand of binary operator,
2. and then match ~~`LHS`~~ **`RHS`** matcher to the ~~`second`~ **`first`** operand of binary operator.
Surprisingly, `$ ninja check-llvm` still passes with this.
But i expect the bots will disagree..
The motivational unittest is included.
I'd like to use this in D45664.
Reviewers: spatel, craig.topper, arsenm, RKSimon
Reviewed By: craig.topper
Subscribers: xbolva00, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45828
llvm-svn: 331085
Some of the bots were failing in a different way to the others. These were
unable to compare tuples. Fix this by changing to a struct, thereby avoiding
the quirks of tuples.
llvm-svn: 331081
We currently have a hard to solve analysis problem around the order of instructions within a potentially throwing block. We can't cheaply determine whether a given instruction is before the first potential throw in the block. While we're working on that in the background, special case the first instruction within the header.
why this particular special case? Well, headers are guaranteed to execute if the loop does, and it turns out we tend to produce this form in practice.
In a follow on patch, I tend to extend LICM with an alternate approach which works for any instruction in the header before the first throw, but this is the best I can come up with other users of the analysis (such as store promotion.)
Note: I can't show the difference in the analysis result since we're ORing in the expensive instruction walk used by SCEV. Using the full walk is not suitable for a general solution.
llvm-svn: 331079
Summary:
Only allow a single unique .symver alias per symbol. This matches the
behavior of gas. I noticed that we ignored multiple mismatched symver
directives looking at https://reviews.llvm.org/D45798
Reviewers: pcc, tejohnson, espindola
Reviewed By: pcc
Subscribers: emaste, arichardson, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D45845
llvm-svn: 331078
Extend the live-in check for all aliased registers so that we can
allow sinking Copy instructions when only implicit def is in successor's
live-in.
llvm-svn: 331072
Summary:
Currently only the memory size is supported but others can be added as
needed.
narrowScalar for G_LOAD and G_STORE now correctly update the
MachineMemOperand and will refuse to legalize atomics since those need more
careful expansions to maintain atomicity.
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, aemerson, javed.absar
Reviewed By: aemerson
Subscribers: aemerson, rovka, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45466
llvm-svn: 331071
The idea is to have a pass which performs the same transformation as GuardWidening, but can be run within a loop pass manager without disrupting the pass manager structure. As demonstrated by the test case, this doesn't quite get there because of issues with post dom, but it gives a good step in the right direction. the motivation is purely to reduce compile time since we can now preserve locality during the loop walk.
This patch only includes a legacy pass. A follow up will add a new style pass as well.
llvm-svn: 331060
These branches were previously unanalyzable and unselectable. Add them and
recognize how to generate their inverses.
Reviewers: smaksimovic, atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D46113
llvm-svn: 331050
Put the first ldp at the end, so that the load-store optimizer can run
and merge the ldp and the add into a post-index ldp.
This didn't work in case no frame was needed and resulted in code size
regressions.
llvm-svn: 331044
If the MachineInstr uses a custom inserter and is then erased after
instruction selection, there is no use for mapping it to a sched class.
Review: Ulrich Weigand
llvm-svn: 331040
We currently support LCSSA PHI nodes in the outer loop exit, if their
incoming values do not come from the outer loop latch or if the
outer loop latch has a single predecessor. In that case, the outer loop latch
will be executed only if the inner loop gets executed. If we have multiple
predecessors for the outer loop latch, it may be executed even if the inner
loop does not get executed.
This is a first step to support the case described in
https://bugs.llvm.org/show_bug.cgi?id=30472
Reviewers: efriedma, karthikthecool, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43237
llvm-svn: 331037
This adds IR intrinsics for the AArch64 dot-product instructions introduced in
v8.2-A.
Differential revisioon: https://reviews.llvm.org/D46107
llvm-svn: 331036
Since PTX has grown a <2 x half> datatype vectorization has become more
important. The late LoadStoreVectorizer intentionally only does loads
and stores, but now arithmetic has to be vectorized for optimal
throughput too.
This is still very limited, SLP vectorization happily creates <2 x half>
if it's a legal type but there's still a lot of register moving
happening to get that fed into a vectorized store. Overall it's a small
performance win by reducing the amount of arithmetic instructions.
I haven't really checked what the loop vectorizer does to PTX code, the
cost model there might need some more tweaks. I didn't see it causing
harm though.
Differential Revision: https://reviews.llvm.org/D46130
llvm-svn: 331035
This patch makes compiler does not fuse fmul and fadd/fsub into
fmadd/fmsub by default. Instead, -fp-contract=fast option can
be used when such behavior is desired.
Differential Revision: https://reviews.llvm.org/D46057
llvm-svn: 331033
This adds IR intrinsics for the ARM dot-product instructions introduced in
v8.2-A.
Differential revision: https://reviews.llvm.org/D46106
llvm-svn: 331032
Back when the R52 schedule was added in rL286949, there was no way
to enable machine schedules in ARM for specific cores. Since then a
target feature has been added. This enables the feature for R52,
removing the need to manually specify compiler flags.
llvm-svn: 331027
Summary:
The value tracking analysis uses function alignment to infer that the
least significant bits of function pointers are known to be zero.
Unfortunately, this is not correct for ARM targets: the least
significant bit of a function pointer stores the ARM/Thumb state
information (i.e., the LSB is set for Thumb functions and cleared for
ARM functions).
The original approach (https://reviews.llvm.org/D44781) introduced a
new field for function pointer alignment in the DataLayout structure
to address this. But it seems unlikely that optimizations based on
function pointer alignment would bring much benefit in practice to
justify the additional maintenance burden, so this patch simply
assumes that function pointer alignment is always unknown.
Reviewers: javed.absar, efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, llvm-commits, hfinkel, rogfer01
Differential Revision: https://reviews.llvm.org/D46110
llvm-svn: 331025
Add new umin creation method which accepts a list of operands.
SCEV does not represents umin which is required in getExact, so
it transforms umin to umax with not. As a result the transformation of
tree of max to max with several operands does not work.
We just use the new introduced method for creation umin from several operands.
Reviewers: sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46047
llvm-svn: 331015
It doesn't unwind, and the wrong marking leads to the creation of an
.eh_frame section when it isn't necessary.
Differential Revision: https://reviews.llvm.org/D46082
llvm-svn: 331008
The program might have unusual expectations for functions; for example,
the Linux kernel's build system warns if it finds references from .text
to .init.data.
I'm not sure this is something we actually want to make any guarantees
about (there isn't any explicit rule that would disallow outlining
in this case), but we might want to be conservative anyway.
Differential Revision: https://reviews.llvm.org/D46091
llvm-svn: 331007
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
Summary: If file stream arg is not captured and source is fopen, we could replace IO calls by unlocked IO ("_unlocked" function variants) to gain better speed,
Reviewers: efriedma, RKSimon, spatel, sanjoy, hfinkel, majnemer
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D45736
llvm-svn: 331002
Summary:
Simplify integer add expression X % C0 + (( X / C0 ) % C1) * C0 to
X % (C0 * C1). This is a common pattern seen in code generated by the XLA
GPU backend.
Add test cases for this new optimization.
Patch by Bixia Zheng!
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: efriedma, craig.topper, lebedev.ri, llvm-commits, jlebar
Differential Revision: https://reviews.llvm.org/D45976
llvm-svn: 330992
The main goal of this change is to make it much easier to track which
rules are actually covered by Testgen'erated regression tests.
Reviewers: aemerson, dsanders
Differential Revision: https://reviews.llvm.org/D46095
llvm-svn: 330988
`lb` and `lbu` commands accepts 16-bit signed offsets. But GAS accepts
larger offsets for these commands. If an offset does not fit in 16-bit
range, `lb` command is translated into lui/lb or lui/addu/lb series.
It's interesting that initially LLVM assembler supported this feature,
but later it was broken.
This patch restores support for 32-bit offsets. It replaces `mem_simm16`
operand for `LB` and `LBu` definitions by the new `mem_simmptr` operand.
This operand is intended to check that offset fits to the same size as
using for pointers. Later we will be able to extend this rule and
accepts 64-bit offsets when it is possible.
Some issues remain:
- The regression also affects LD, SD, LH, LHU commands. I'm going
to fix them by a separate patch.
- GAS accepts any 32-bit values as an offset. Now LLVM accepts signed
16-bit values and this patch extends the range to signed 32-bit offsets.
In other words, the following code accepted by GAS and still triggers
an error by LLVM:
```
lb $4, 0x80000004
# gas
lui a0, 0x8000
lb a0, 4(a0)
```
- In case of 64-bit pointers GAS accepts a 64-bit offset and translates
it to the li/dsll/lb series of commands. LLVM still rejects it.
Probably this feature has never been implemented in LLVM. This issue
is for a separate patch.
```
lb $4, 0x800000001
# gas
li a0, 0x8000
dsll a0, a0, 0x14
lb a0, 4(a0)
```
Differential Revision: https://reviews.llvm.org/D45020
llvm-svn: 330983
Summary:
Use the FP for scavenged spill slot accesses to prevent corruption of
the callee-save region when the SP is re-aligned.
Based on problem and patch reported by @paulwalker-arm
This is an alternative to solution proposed in D45770
Reviewers: t.p.northover, paulwalker-arm, thegameg, javed.absar
Subscribers: qcolombet, mcrosier, paulwalker-arm, kristof.beyls, rengolin, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46063
llvm-svn: 330976
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
llvm-svn: 330970
Summary:
The old comment referred to llvm/IR/Writer.h which doesn't longer exist.
This patch replaces it with an up-to-date description of AsmWriter library.
Patch by Alex Yursha.
Reviewers: gribozavr, vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45895
llvm-svn: 330962
Summary:
Follow-up to D43690, the EliminateAvailableExternally pass currently
runs under -O0 and -O2 and up. Under -O1 we would still want to drop
available_externally symbols to reduce space without inlining having
run.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D46093
llvm-svn: 330961
Correct the definitions of ei, di, eret, deret, wait, syscall and break.
Also provide microMIPS specific aliases to match the MIPS aliases.
Additionally correct the definition of the wait instruction so that
it is present in the instruction mapping tables.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45939
llvm-svn: 330952
As noted, the attribute name is subject to change once we have
the clang side implemented, but it's clear that we need some
kind of attribute-based predication here based on the discussion
for:
rL330437
llvm-svn: 330951
This causes some slight shuffling but no meaningful codegen differences on the
corpus I used for testing, but it has a larger impact when combined with e.g.
rematerialisation. Regardless, it makes sense to report as accurate
target-specific information as possible.
llvm-svn: 330949
There's no direct instruction for this, but it's trivially implemented
with two movs. Without this the code generator just dies when
encountering a shufflevector.
Differential Revision: https://reviews.llvm.org/D46116
llvm-svn: 330948
As discussed in the post-review comments for rL330437,
we need to guard this fold to allow existing code to
keep working with the undefined behavior that they've
come to rely on.
That would mean duplicating more code than we already
have, so let's fix that first.
llvm-svn: 330947
This patch adds a new shuffle kind useful for transposing a 2xn matrix. These
transpose shuffle masks read corresponding even- or odd-numbered vector
elements from two n-dimensional source vectors and write each result into
consecutive elements of an n-dimensional destination vector. The transpose
shuffle kind is meant to model the TRN1 and TRN2 AArch64 instructions. As such,
this patch also considers transpose shuffles in the AArch64 implementation of
getShuffleCost.
Differential Revision: https://reviews.llvm.org/D45982
llvm-svn: 330941
I'm unable to construct a representative test case that demonstrates the
advantage, but it seems sensible to report accurate target-specific
information regardless.
llvm-svn: 330938
This patch extends the PredicateMethod of AsmOperands used in SVE's
LD1 instructions with a DiagnosticPredicate. This makes them 'context
sensitive' to the operand that has been parsed and tells the user to
use the right register (with expected shift/extend), rather than telling
the immediate is out of range when it actually parsed a register.
Patch [2/2] in a series to improve assembler diagnostics for SVE:
- Patch [1/2]: https://reviews.llvm.org/D45879
- Patch [2/2]: https://reviews.llvm.org/D45880
Reviewers: olista01, stoklund, craig.topper, mcrosier, rengolin, echristo, fhahn, SjoerdMeijer, evandro, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D45880
llvm-svn: 330934
This has no impact on codegen for the current RISC-V unit tests or my small
benchmark set and very minor changes in a few programs in the GCC torture
suite. Based on this, I haven't been able to produce a representative test
program that demonstrates a benefit from isLegalAddressingMode. I'm committing
the patch anyway, on the basis that presenting accurate information to the
target-independent code is preferable to relying on incorrect generic
assumptions.
llvm-svn: 330932
instructions.
These have special permission according to the x86 manual to read
unaligned memory, and this folding is done by ICC and GCC as well.
This corrects one of the issues identified in PR37246.
llvm-svn: 330896
This reverts commit 023c8be90980e0180766196cba86f81608b35d38.
This patch triggers miscompile of zlib on PowerPC platform. Most likely it is
caused by some pre-backend PPC-specific pass, but we don't clearly know the
reason yet. So we temporally revert this patch with intention to return it
once the problem is resolved. See bug 37229 for details.
llvm-svn: 330893
If no data or instructions are emitted after a location directive, we
should clear the cv_loc when we change sections, or it will be emitted
at the beginning of the next section. This violates our invariant that
all .cv_loc directives belong to the same section. Add clearer
assertions for this.
llvm-svn: 330884
Algorithmically compute the 'x20' SDIV/UDIV vector costs - this is necessary for PR36550 when DIV costs will be driven from the scheduler models.
llvm-svn: 330870
- Add "amdgpu-waitcnt-forcezero" to force all waitcnt instrs to be emitted as s_waitcnt vmcnt(0) expcnt(0) lgkmcnt(0)
- Add debug counters to control force emit of s_waitcnt instrs; debug counters:
si-insert-waitcnts-forceexp: force emit s_waitcnt expcnt(0) instrs
si-insert-waitcnts-forcevm: force emit s_waitcnt lgkmcnt(0) instrs
si-insert-waitcnts-forcelgkm: force emit s_waitcnt vmcnt(0) instrs
- Add some debug statements
Note that a variant of this patch was previously committed/reverted.
Differential Revision: https://reviews.llvm.org/D45888
llvm-svn: 330862
Debug var, expr and loc were only supported for non-fixed stack objects.
This patch adds the following fields to the "fixedStack:" entries, and
renames the ones from "stack:" to:
* debug-info-variable
* debug-info-expression
* debug-info-location
Differential Revision: https://reviews.llvm.org/D46032
llvm-svn: 330859
Imports in a wasm module can have custom module name. This change
adds the module name to the WasmSymbol structure so that the linker
can preserve this module name.
This is needed to fix: https://bugs.llvm.org/show_bug.cgi?id=37168
Differential Revision: https://reviews.llvm.org/D45797
llvm-svn: 330854
Previously we only formed MUL_IMM when we split a constant. This blocked load folding on those cases. We should also form MUL_IMM for 3/5/9 to favor LEA over load folding.
Differential Revision: https://reviews.llvm.org/D46040
llvm-svn: 330850
Previously `call zero`, `call f0` etc would fail. This leads to compilation
failures if building programs that define functions with those names and using
-save-temps.
llvm-svn: 330846
Summary:
When performing indirect call promotion, current implementation inspects "all" parameters of the callsite and attemps to match with the formal argument type of the callee function. However, it is not possible to find the type for variable length arguments, and the compiler crashes when it attemps to match the type for variable lenght argument.
It seems that the bug is introduced with D40658. Prior to that, the type matching is performed only for the parameters whose ID is less than callee->getFunctionNumParams(). The attached test case will crash without the patch.
Reviewers: mssimpso, davidxl, davide
Reviewed By: mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46026
llvm-svn: 330844
Virtually all other tablegen outputs are called .inc, not .gen, so rename these two too for consistency.
No behavior change.
https://reviews.llvm.org/D46058
llvm-svn: 330843
As discussed in D45862, we want to delete parts of
this code because it can create more instructions
than it removes. But we also want to preserve some
folds that are winners, so tidy up what's here to
make splitting the good from bad a bit easier.
llvm-svn: 330841
To do this:
1. Change GlobalAddress SDNode to TargetGlobalAddress to avoid legalizer
split the symbol.
2. Change ExternalSymbol SDNode to TargetExternalSymbol to avoid legalizer
split the symbol.
3. Let PseudoCALL match direct call with target operand TargetGlobalAddress
and TargetExternalSymbol.
Differential Revision: https://reviews.llvm.org/D44885
llvm-svn: 330827
To do this:
1. Add PseudoCALLIndirct to match indirect function call.
2. Add PseudoCALL to support parsing and print pseudo `call` in assembly
3. Expand PseudoCALL to the following form with R_RISCV_CALL relocation type
while encoding:
auipc ra, func
jalr ra, ra, 0
If we expand PseudoCALL before emitting assembly, we will see auipc and jalr
pair when compile with -S. It's hard for assembly parser to parsing this
pair and identify it's semantic is function call and then insert R_RISCV_CALL
relocation type. Although we could insert R_RISCV_PCREL_HI20 and
R_RISCV_PCREL_LO12_I relocation types instead of R_RISCV_CALL.
Due to RISCV relocation design, auipc and jalr pair only can relax to jal with
R_RISCV_CALL + R_RISCV_RELAX relocation types.
We expand PseudoCALL as late as encoding(RISCVMCCodeEmitter) instead of before
emitting assembly(RISCVAsmPrinter) because we want to preserve call
pseudoinstruction in assembly code. It's more readable and assembly parser
could identify call assembly and insert R_RISCV_CALL relocation type.
Differential Revision: https://reviews.llvm.org/D45859
llvm-svn: 330826
ISel is currently picking 'JAL' over 'JAL_MM' for calling a function when
targeting microMIPS. A later patch will correct this behaviour.
This patch extends the mechanism for transforming instructions into their short
delay to recognise 'JAL_MM' for transforming into 'JALS_MM'.
llvm-svn: 330825
This also means we have to check if the latch is the exiting block now,
as `transform` expects the latches to be the exiting blocks too.
https://bugs.llvm.org/show_bug.cgi?id=36586
Reviewers: efriedma, davide, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45279
llvm-svn: 330806
Summary:
When Reassociate is rewriting an expression tree it may
reuse old binary expression nodes, for new expressions.
Whenever an expression node is reused, but with a non-trivial
change in the result, we need to invalidate any debug info
that is associated with the node.
If for example rewriting
x = mul a, b
y = mul c, x
into
x = mul c, b
y = mul a, x
we still get the same result for 'y', but 'x' is a new expression.
All debug info referring to 'x' must be invalidated (marked as
optimized out) since we no longer calculate the expected value.
As a side-effect this patch avoid (at least some) problems where
reassociate could end up creating IR with debug-use before def.
Earlier the dbg.value nodes where left untouched in the IR, while
the reused binary nodes where sinked to just before the root node
of the rewritten expression tree. See PR27273 for more info about
such problems.
Reviewers: dblaikie, aprantl, dexonsmith
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45975
llvm-svn: 330804
Summary:
Use a MapVector instead of a DenseMap for RemMap since it is iteratated
over and the order of iteration can effect the order that new
instructions are created. This can in turn effect the use list order of
div/rem input values if multiple new instructions are created that share
any input values.
Reviewers: spatel
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D45858
llvm-svn: 330792
update API for dominators rather than doing manual, hacky updates.
This is just the first step, but in some ways the most important as it
moves the non-trivial unswitching to update the domtree rather than
fully recalculating it each time.
Subsequent patches should remove the custom update logic used by the
trivial unswitch and replace it with uses of the update API.
This also fixes a number of bugs I was seeing when testing non-trivial
unswitch due to it querying the quasi-correct dominator tree. Now the
tree is 100% correct and safe to query. That said, there are still more
bugs I can see with non-trivial unswitch just running over the test
suite, so more bugfix patches are needed as well.
Thanks to both Sanjoy and Fedor for reviews and testing!
Differential Revision: https://reviews.llvm.org/D45943
llvm-svn: 330787
Before, the outliner would grab ADRPs that used LR/W30. This patch fixes
that by checking for explicit uses of those registers before the special-casing
for ADRPs.
This also adds a test that ensures that those sorts of ADRPs won't be outlined.
llvm-svn: 330783
We were previously prefering ZEXTLOAD over EXTLOAD if it is legal. This triggers during X86's promotion of i16->i32. Not sure about other targets.
Using ZEXTLOAD can prevent folding it to SEXTLOAD later if we were to promote a sign extended operand like we would need for SRA. However, X86 doesn't currently promote i16 SRA. I was looking into doing that which is how I found this issue.
This is also blocking our ability to fold 4 byte aligned EXTLOADs with "loadi32". This is what caused most of the test changes here.
Differential Revision: https://reviews.llvm.org/D45585#inline-402825
llvm-svn: 330781
Previously, _any_ store or load instruction was considered to be
operating on a spill if it had a frameindex as an operand, and thus
was fair game for optimisations such as "StackSlotColoring". This
usually works, except on architectures where spills can be partially
restored, for example on X86 where a spilt vector can have a single
component loaded (zeroing the rest of the target register). This can be
mis-interpreted and the zero extension unsoundly eliminated, see
pr30821.
To avoid this, this commit optionally provides the caller to
isLoadFromStackSlot and isStoreToStackSlot with the number of bytes
spilt/loaded by the given instruction. Optimisations can then determine
that a full spill followed by a partial load (or vice versa), for
example, cannot necessarily be commuted.
Patch by Jeremy Morse!
Differential Revision: https://reviews.llvm.org/D44782
llvm-svn: 330778
Summary: This is no longer used by mesa since its 18.0.0 release.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D45988
llvm-svn: 330775
Summary:
The PointerMayBeCapturedBefore function's DomTree arg should be
const instead of non-const. There are no non-const uses of it
in the function.
llvm-svn: 330769
If a packed inline constant is sign extended it must be truncated
after the shift. I.e. a constant (0xH0000, 0xHBC00), will be represented
as 0xFFFFFFFFBC000000 in the IR because the immediate is sign extended
to 64 bit. After the value shifted right by 16 to use it in a low part
with op_sel_hi it becomes 0xFFFFFFFFBC00 and does not qualify as inline
constant any longer.
Fixed the error and added verification code. Without the fix and with
the verification bug is causing pk_max_f16_literal.ll to fail.
Differential Revision: https://reviews.llvm.org/D45987
llvm-svn: 330752
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
https://reviews.llvm.org/D45899
llvm-svn: 330742
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Patch #2 from VPlan Outer Loop Vectorization Patch Series #1
(RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
This patch introduces the basic infrastructure to detect, legality check
and process outer loops annotated with hints for explicit vectorization.
All these changes are protected under the feature flag
-enable-vplan-native-path. This should make this patch NFC for the existing
inner loop vectorizer.
Reviewers: hfinkel, mkuper, rengolin, fhahn, aemerson, mssimpso.
Differential Revision: https://reviews.llvm.org/D42447
llvm-svn: 330739
After D43236, we started interchanging loops with empty dependence
matrices. In isProfitableForVectorization, we try to determine if
interchanging makes the loop dependences more friendly to the
vectorizer. If there are no dependences, we should not interchange,
based on that heuristic.
Reviewers: efriedma, mcrosier, karthikthecool, blitz.opensource
Reviewed By: mcrosier
Differential Revision: https://reviews.llvm.org/D45208
llvm-svn: 330738
Current code does not check that a register number is in the 0-31 range.
Sometimes the parser checks that later for some kinds of instructions,
but that leads to unclear / incorrect error messages like that:
% cat test.s
.text
lb $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
test.s:2:10: error: expected memory with 16-bit signed offset
lb $4, 8($32)
^
Sometimes the parser just crashes:
% cat test.s
.text
lw $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
This patch resolves the problem by checking that register number after
'$' sign is in the 0-31 range. If the number is out of the range the
parser shows the `invalid register number` error, but treats invalid
register number as a normal one to continue parsing and catch other
possible errors.
Differential Revision: https://reviews.llvm.org/D45919
llvm-svn: 330732
Matt Arsenault