This code was repeated in two callers of CommitTargetLoweringOpt.
But CommitTargetLoweringOpt is also called from TargetLowering.
We should print a message for those calls to. So sink the
repeated code into CommitTargetLoweringOpt to catch those calls.
We are calling getValidShiftAmountConstant first followed by getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant if that failed. But both are used in the same way in ComputeNumSignBits and the Min/Max variants call getValidShiftAmountConstant internally anyhow.
This patch adds support for emission of following DWARFv5 macro
forms in .debug_macro.dwo section:
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D78866
Summary:
This caused incorrect debug information for parameters:
Previously, after a COPY of a parameter that changes the width,
we would emit a DBG_VALUE that continues to be associated to that
parameter, even though it now used a different width.
This made the LiveDebugValues pass assume the parameter value
got clobbered and it stopped tracking the parameter entry
value, leading to incorrect debug information.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39715
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80819
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
DW_MACRO_define_strx forms are supported now in llvm-dwarfdump and these
forms can be used in both debug_macro[.dwo] sections. An added advantage
for using strx forms over strp forms is that it uses indices
approach instead of a relocation to debug_str section.
This patch unify the emission for debug_macro section.
Reviewed by: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D78865
Since on AIX, our strategy is to not use -u to suppress any undefined
symbols, we need to emit .extern for the symbols with AvailableExternally
linkage.
Differential Revision: https://reviews.llvm.org/D80642
optimizations
As discussed in the thread http://lists.llvm.org/pipermail/llvm-dev/2020-May/141838.html,
some bit field access width can be reduced by ReduceLoadOpStoreWidth, some
can't. If two accesses are very close, and the first access width is reduced,
the second is not. Then the wide load of second access will be stalled for long
time.
This patch add command line options to guard ReduceLoadOpStoreWidth and
ShrinkLoadReplaceStoreWithStore, so users can use them to disable these
store width reduction optimizations.
Differential Revision: https://reviews.llvm.org/D80745
Currently combineInsertEltToShuffle turns insert_vector_elt into a
vector_shuffle, even if the inserted element is a vector with a single
element. In this case, it should be unlikely that the additional shuffle
would be more efficient than a insert_vector_elt.
Additionally, this fixes a infinite cycle in DAGCombine, where
combineInsertEltToShuffle turns a insert_vector_elt into a shuffle,
which gets turned back into a insert_vector_elt/extract_vector_elt by
a custom AArch64 lowering (in visitVECTOR_SHUFFLE).
Such insert_vector_elt and extract_vector_elt combinations can be
lowered efficiently using mov on AArch64.
There are 2 test changes in arm64-neon-copy.ll: we now use one or two
mov instructions instead of a single zip1. The reason that we need a
second mov in ins1f2 is that we have to move the result to the result
register and is not really related to the DAGCombine fold I think.
But in any case, on most uarchs, mov should be cheaper than zip1. On a
Cortex-A75 for example, zip1 is twice as expensive as mov
(https://developer.arm.com/docs/101398/latest/arm-cortex-a75-software-optimization-guide-v20)
Reviewers: spatel, efriedma, dmgreen, RKSimon
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D80710
AddressingModeMatcher::matchScaledValue was calling getSExtValue for a constant before ensuring that we can actually represent the value as int64_t
Fixes OSSFuzz#22723 which is a followup to rGc479052a74b2 (PR46004 / OSSFuzz#22357)
Summary:
The description of EXTACT_SUBVECTOR and INSERT_SUBVECTOR has been
changed to accommodate scalable vectors (see ISDOpcodes.h). This
patch updates the asserts used to verify these requirements when
using SelectionDAG's getNode interface.
This patch introduces the MVT function getVectorMinNumElements
that can be used against fixed-length and scalable vectors when
only the known minimum vector length is required.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80709
We should be using getVectorElementCount() to assert that two types
have the same numbers of elements. I encountered the warnings while
compiling this test:
CodeGen/AArch64/sve-intrinsics-ld1.ll
Differential Revision: https://reviews.llvm.org/D80616
I have tried to ensure that SelectionDAG and DAGCombiner do
sensible things for scalable vectors, and added support for a
limited number of simple folds. Codegen support for the vector
extract patterns have also been added to the AArch64 backend.
New vector extract tests have been added here:
CodeGen/AArch64/sve-extract-element.ll
and I have also added new folds using inserts and extracts here:
CodeGen/AArch64/sve-insert-element.ll
Differential Revision: https://reviews.llvm.org/D80208
During legalization we can end up with extends of loads, which in the case of
zexts causes us to not hit tablegen imported patterns.
The caveat here is that we don't want anyext load forming, since some variants
are illegal. This change also prevents the combine from creating any illegal
loads.
Differential Revision: https://reviews.llvm.org/D80458
I get confused by a lot of the predicate names here, since I would
assume they apply to vectors as well. Rename to reflect they only
apply to scalars.
Also add a few predicates AMDGPU uses that should be generally useful.
Also add any() to complement all. I've wanted to use this a few times
but then worked around it not being there.
Summary:
We received a report of LiveDebugValues consuming 25GB+ of RAM when
compiling code generated by Unity's IL2CPP scripting backend.
There's an initial 5GB spike due to repeatedly copying cached lists of
MachineBasicBlocks within the UserValueScopes members of VarLocs.
But the larger scaling issue arises due to the fact that prior to range
extension, there are 81K basic blocks and 156K DBG_VALUEs: given enough
memory, LiveDebugValues would insert 101 million MIs (I counted this by
incrementing a counter inside of VarLoc::BuildDbgValue).
It seems like LiveDebugValues would have to be rearchitected to support
this kind of input (we'd need some new represntation for DBG_VALUEs that
get inserted into ~every block via flushPendingLocs). OTOH, large globs
of auto-generated code are typically not debugged interactively.
So: add cutoffs to disable range extension when the input is too big. I
chose the cutoffs experimentally, erring on the conservative side. When
compiling a large collection of Apple software, range extension never
got disabled.
rdar://63418929
Reviewers: aprantl, friss, jmorse, Orlando
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80662
Summary:
Verify that each DBG_VALUE has a debug location. This is required by
LiveDebugValues, and perhaps by other late passes.
There's an exception for tests: lots of tests use a two-operand form of
DBG_VALUE for convenience. There's no reason to prevent that.
This is an extension of D80665, but there's no dependency.
Reviewers: aprantl, jmorse, davide, chrisjackson
Subscribers: hiraditya, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80670
Summary:
Assert that MachineLICM does not move a debug instruction and then drop
its debug location. Later passes require each debug instruction to have
a location.
Testing: check-llvm, clang stage2 RelWithDebInfo build (x86_64)
Reviewers: aprantl, davide, chrisjackson, jmorse
Subscribers: hiraditya, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80665
These are the two operand sets which are expected to survive more than another week or so. Instead of bothering to update the deopt and gc-transition operands, we'll just wait until those are removed and delete the code.
For those following along, this is likely to be the last (major) change in this sequence for about a week. I want to wait until all of this has been merged downstream to ensure I haven't introduced any bugs (and migrate some downstream code to the new interfaces). Once that's done, we should be able to delete Statepoint/ImmutableStatepoint without too much work.
I'd apparently only grepped in the lib directories and missed a few used in the Statepoint header itself. Beyond simple mechanical cleanup, changed the type of one routine to reflect the fact it also returns a statepoint.
Sinking logic around actual callee from Statepoint to GCStatepointInst. While doing so, adjust naming to be consistent about refering to "actual" callee and follow precedent on naming from CallBase otherwise.
Use the result to simplify one consumer. This is mostly just to ensure the new code is exercised, but is also a helpful cleanup on it's own.
While LazyBlockFrequencyInfo itself is lazy, the dominator tree
and loop info analyses it requires are not. Drop the dependency
on this pass in SelectionDAGIsel at O0.
This makes for a ~0.6% O0 compile-time improvement.
Differential Revision: https://reviews.llvm.org/D80387
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
Now that all of the statepoint related routines have classes with isa support, let's cleanup.
I'm leaving the (dead) utitilities in tree for a few days so that I can do the same cleanup downstream without breakage.
Can't test this since I can't directly use the default expansion for
AMDGPU. It needs to scale the amount by the wave size, rather than use
the raw byte size value.
If we have a memory instruction (e.g. a load), we shouldn't combine it away in
some trivial combine.
It's possible that, say, a call lives between the instructions. This could
modify the value loaded, making the load instructions not safe to fold.
Differential Revision: https://reviews.llvm.org/D80053
Use getFunctionEntryPointSymbol whenever possible to enclose the
implementation detail and reduce duplicate logic.
Differential Revision: https://reviews.llvm.org/D80402
In the current statepoint design, we have four distinct groups of operands to the call: call args, gc transition args, deopt args, and gc args. This format prexisted the support in IR for operand bundles and was in fact one of the inspirations for the extension. However, we never went back and rearchitected statepoints to fully leverage bundles.
This change is the first in a small sequence to do so. All this does is extend the SelectionDAG lowering code to allow deopt and gc transition operands to be specified in either inline argument bundles or operand bundles.
Differential Revision: https://reviews.llvm.org/D8059
Summary:
Previously, we only added early-clobber flags to the 'group' immediate flag operand
of an inline asm operand.
However, we also have to add the EarlyClobber flag to the MachineOperand itself.
This fixes PR46028
Reviewers: arsenm, leonardchan
Reviewed By: arsenm, leonardchan
Subscribers: phosek, wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80467
Summary:
A struct argument can be passed-by-value to a callee via a pointer to a
temporary stack copy. Add support for emitting an entry value DBG_VALUE
when an indirect parameter DBG_VALUE becomes unavailable. This is done
by omitting DW_OP_stack_value from the entry value expression, to make
the expression describe the location of an object.
rdar://63373691
Reviewers: djtodoro, aprantl, dstenb
Subscribers: hiraditya, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D80345
Confusingly, these were unrelated and had different semantics. The
G_PTR_MASK instruction predates the llvm.ptrmask intrinsic, but has a
different format. G_PTR_MASK only allows clearing the low bits of a
pointer, and only a constant number of bits. The ptrmask intrinsic
allows an arbitrary mask. Replace G_PTR_MASK to match the intrinsic.
Only selects the cases that look like the old instruction. More work
is needed to select the general case. Also new legalization code is
still needed to deal with the case where the incoming mask size does
not match the pointer size, which has a specified behavior in the
langref.
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
binop (splat X), (splat C) --> splat (binop X, C)
binop (splat C), (splat X) --> splat (binop C, X)
We do this in IR, and there's a similar fold for the case with 2
non-constant operands just above the code diff in this patch.
This was discussed in D79718, and the extra shuffle in the test
(llvm/test/CodeGen/X86/vector-fshl-128.ll::sink_splatvar) where it
was noticed disappears because demanded elements analysis is no
longer blocked. The large majority of the test diffs seem to be
benign code scheduling changes, but I do see another type of win:
moving the splat later allows binop narrowing in some cases.
Regressions were avoided on x86 and ARM with the INSERT_VECTOR_ELT
restriction.
Differential Revision: https://reviews.llvm.org/D79886
Summary:
Clean-up code around mem ops clustering logic. This patch cleans up code within
the function clusterNeighboringMemOps(). It is WIP, and this patch is a first cut.
Reviewers: foad, rampitec, arsenm, vpykhtin, javedabsar
Reviewed By: foad
Subscribers: MatzeB, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, javed.absar, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80119
-fno-PIC and -fPIE code generally cannot be linked in -shared mode and there is no benefit accessing via local aliases.
Actually, a .Lfoo$local reference will be converted to a STT_SECTION (if no section relaxation) reference which will cause the section symbol (sizeof(Elf64_Sym)=24) to be generated.
-fno-semantic-interposition is currently the CC1 default. (The opposite
disables some interprocedural optimizations.) However, it does not infer
dso_local: on most targets accesses to ExternalLinkage functions/variables
defined in the current module still need PLT/GOT.
This patch makes explicit -fno-semantic-interposition infer dso_local,
so that PLT/GOT can be eliminated if targets implement local aliases
for AsmPrinter::getSymbolPreferLocal (currently only x86).
Currently we check whether the module flag "SemanticInterposition" is 0.
If yes, infer dso_local. In the future, we can infer dso_local unless
"SemanticInterposition" is 1: frontends other than clang will also
benefit from the optimization if they don't bother setting the flag.
(There will be risks if they do want ELF interposition: they need to set
"SemanticInterposition" to 1.)
For the supported binops (basic arithmetic, logicals + shifts), if we fail to simplify the demanded vector elts, then call SimplifyMultipleUseDemandedBits and try to peek through ops to remove unnecessary dependencies.
This helps with PR40502.
Differential Revision: https://reviews.llvm.org/D79003
Fixes a build issue with libc++ configured with _LIBCPP_RAW_ITERATORS (ADL not effective)
```
llvm/lib/CodeGen/TargetLoweringObjectFileImpl.cpp:1602:3: error: no matching function for call to 'transform'
transform(HexString.begin(), HexString.end(), HexString.begin(), tolower);
^~~~~~~~~
```
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D80475
For the 'inverse shift', we currently always perform a subtraction of the original (masked) shift amount.
But for the case where we are handling power-of-2 type widths, we can replace:
(sub bw-1, (and amt, bw-1) ) -> (and (xor amt, bw-1), bw-1) -> (and ~amt, bw-1)
This allows x86 shifts to fold away the and-mask.
Followup to D77301 + D80466.
http://volta.cs.utah.edu:8080/z/Nod0Gr
Differential Revision: https://reviews.llvm.org/D80489
This patch introduces a TargetLowering query, isMulhCheaperThanMulShift.
Currently in DAG Combine, it will transform mulhs/mulhu into a
wider multiply and a shift if the wide multiply is legal.
This TLI function is implemented on 64-bit PowerPC, as it is more desirable to
have multiply-high over multiply + shift for words and doublewords. Having
multiply-high can also aid in further transformations that can be done.
Differential Revision: https://reviews.llvm.org/D78271
Disable pruning of unreachable resumes in the DwarfEHPrepare pass
at optnone. While I expect the pruning itself to be essentially free,
this does require a dominator tree calculation, that is not used for
anything else. Saving this DT construction makes for a 0.4% O0
compile-time improvement.
Differential Revision: https://reviews.llvm.org/D80400
Replace with forward declaration and move dependency down to source files that actually need it.
Both TargetLowering.h and TargetMachine.h are 2 of the most expensive headers (top 10) in the ClangBuildAnalyzer report when building llc.
When performing codegen at optnone, don't add alias analysis to
the pipeline. We don't need it, but it causes an unnecessary
dominator tree calculation.
I've also moved the module verifier call to the top so that a bunch
of disabled-at-optnone passes group more nicely.
Differential Revision: https://reviews.llvm.org/D80378
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
This temporarily reverts commit 7019cea26d.
It seems that, for some targets, there are instructions with a lot of memory operands (probably more than would be expected). This causes a lot of buildbots to timeout and notify failed builds. While investigations are ongoing to find out why this happens, revert the changes.
AddressingModeMatcher::matchAddr was calling getSExtValue for a constant before ensuring that we can actually represent the value as int64_t
Fixes PR46004 / OSSFuzz#22357
(This patch is by Jessica, I'm just committing it on her behalf because I need
a post-legalizer combiner for something else).
This supersedes D77250, which did equivalent work in the selector. This can be
done pre-legalization or post-legalization. Post-legalization is more likely to
hit, since G_IMPLICIT_DEFs tend to appear during legalization. There's no reason
to not do it pre-legalization though-- if it can be caught earlier, great.
(I also think that it might be worth reimplementing D78769 using a
target-specific post-legalization combine too after thinking about it for a
while.)
Differential Revision: https://reviews.llvm.org/D78852
Summary:
To support all targets, the mayAlias member function needs to support instructions with multiple operands.
This revision also changes the order of the emitted instructions in some test cases.
Reviewers: efriedma, hfinkel, craig.topper, dmgreen
Reviewed By: efriedma
Subscribers: MatzeB, dmgreen, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80161
Summary:
For some targets generic combines don't really do much and they
consume a disproportionate amount of time.
There's not really a mechanism in SDISel to tactically disable
combines, but we can have a switch to disable all of them and
let the targets just implement what they specifically need.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79112
When moving an instruction into a block where it was referenced by a phi when peeling,
refer to the phi's register number and assert that the instruction has it in its destinations.
This way, it also covers instructions with more than one destination.
Patch by Hendrik Greving!
Differential Revision: https://reviews.llvm.org/D80027
This is split off from D80316, slightly tightening the definition of overloaded
hardwareloop intrinsic llvm.loop.decrement.reg specifying that both operands
its result have the same type.
We do not have any special handling for constant FP deopt arguments.
They are just spilled to stack or generated in register by MOVS
instruction. This is inefficient and, when we have too many such
constant arguments, may result in register allocation failure.
Instead, we can bitcast such constant FP operands to appropriately
sized integer and record as constant into statepoint and later, into
StackMap.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D80318
Will make it easier to pass the pointer info and alignment
correctly to the loads/stores.
While there also make the i32 stores independent and use a token
factor to join before the load.
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
Previously this code just used a default constructed
MachinePointerInfo. But we know the accesses are to a fixed stack
object or at least somewhere on the stack.
While there fix the alignment passed to the full vector load/stores.
I don't think this function is currently exercised in tree so I
don't know how to test it. I just noticed it when I removed
non-constant index support in this function.
Differential Revision: https://reviews.llvm.org/D80058
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
This patch was originally committed as b8a3c34eee, but broke the
modules build, as LoopAccessAnalysis was using the Expander.
The code-gen part of LAA was moved to lib/Transforms recently, so this
patch can be landed again.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Replace with forward declarations and move necessary includes down to source files.
Exposes an implicit dependency on TargetMachine.h in llvm-opt-fuzzer.cpp
We have the getNegatibleCost/getNegatedExpression to evaluate the cost and negate the expression.
However, during negating the expression, the cost might change as we are changing the DAG,
and then, hit the assertion if we negated the wrong expression as the cost is not trustful anymore.
This patch is target to remove the getNegatibleCost to avoid the out of sync with getNegatedExpression,
and check the cost during negating the expression. It also reduce the duplicated code between
getNegatibleCost and getNegatedExpression. And fix the crash for the test in D76638
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D77319
This was looking for a compare condition, and copying the compare
flags. I don't think this was ever correct outside of certain min/max
patterns which aren't checked, but this probably predates select
instructions having fast math flags.
Replace with forward declarations and move includes down to source files where required.
I also needed to move the TargetLoweringObjectFile::SectionForGlobal wrapper implementation down into TargetLoweringObjectFile.cpp
This reverts commit 525a591f0f.
Fixed an issue with pointers to members based on typedefs. In this case,
LLVM would emit a second UDT. I fixed it by not passing the class type
to getTypeIndex when the base type is not a function type. lowerType
only uses the class type for direct function types. This suggests if we
have a PMF with a function typedef, there may be an issue, but that can
be solved separately.
verifyFunction/verifyModule don't assert or error internally. They
also don't print anything if you don't pass a raw_ostream to them.
So the caller needs to check the result and ideally pass a stream
to get the messages. Otherwise they're just really expensive no-ops.
I've filed PR45965 for another instance in SLPVectorizer
that causes a lit test failure.
Differential Revision: https://reviews.llvm.org/D80106
I have changed the pass so that we ignore shuffle vectors with
scalable vector types, and replaced VectorType with FixedVectorType
in the rest of the pass. I couldn't think of an easy way to test
this change, since for scalable vectors we shouldn't be using
shufflevectors for interleaving. This change fixes up some
type size assert warnings I found in the following test:
CodeGen/AArch64/sve-intrinsics-int-arith-imm.ll
Differential Revision: https://reviews.llvm.org/D79700
> Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
>
> Differential Revision: https://reviews.llvm.org/D79447
This causes asserts in Chromium builds:
CodeViewDebug.cpp:2997: void llvm::CodeViewDebug::emitDebugInfoForUDTs(const std::vector<std::pair<std::string, const DIType *>> &):
Assertion `OriginalSize == UDTs.size()' failed.
I will follow up on the Phabricator issue.
for variables in nested scopes (including inlined functions) if there is a
single location which covers the entire scope and the scope is contained in a
single block.
Based on work by @jmorse.
Reviewed By: vsk, aprantl
Differential Revision: https://reviews.llvm.org/D79571
Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
This is a no-op/NFC at the moment & generally makes the code /somewhat/
cleaner/less reliant on assumptions about what will produce a debug_addr
section.
It's still a bit "spooky action at a distance" - the add ranges code
pre-emptively inserts addresses into the address pool it knows will
eventually be used by the range emission code (or low/high pc).
The 'ideal' would be either to actually compute the addresses needed for
range (& loc) emission earlier - which would mean decanonicalizing the
range/loc representation earlier to account for whether it was going to
use addrx encodings or not (which would be unfortunate, but could be
refactored to be relatively unobtrusive).
Alternatively, emitting the range/loc sections earlier would cause them
to request the needed addresses sooner - but then you endup having to
split finalizeModuleInfo because some things need to be handled there
before the ranges/locs are emitted, I think...
We know the pointer somewhere on the stack, we just don't know
exactly where since the index may be variable.
Differential Revision: https://reviews.llvm.org/D80060
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This is basically the same patch as D63233, but converted to
funnel shifts rather than regular shifts. I did not see a
way to effectively share code for these 2 cases though.
This follows D79718 and D79827 to re-fix PR37426 because
that gets canonicalized to funnel shift intrinsics in IR.
I did draft an alternative patch as an enhancement to
"shouldSinkOperands()", but that was awkward because
we have to key the transform from the select, but then
look at both its users and its operands.
The code was calculating an offset from a stack pointer SDValue.
This is exactly what getMemBasePlusOffset does. I also replaced
sizeof(int) with a hardcoded 4. We know the type we're operating
on is 4 bytes. But the size of int that the source code is being
compiled with isn't guaranteed to be 4 bytes.
While here replace another use of getMemBasePlusOffset that was
proceeded with a call to getConstant with the other signature
that call getConstant internally.
This bug is exposed by Test7 of ehthrow.cxx in MSVC EH suite where
a rethrow occurs in a try-catch inside a catch (i.e., a nested Catch
handlers). See the test code in
https://github.com/microsoft/compiler-tests/blob/master/eh/ehthrow.cxx#L346
When an object is rethrown in a Catch handler, the copy-ctor of this
object must be executed after the destructions of live objects, but
BEFORE the dtors of live objects in parent handlers.
Today Windows 64-bit runtime (__CxxFrameHandler3 & 4) expects nested Catch
handers
are stored in pre-order (outer first, inner next) in $tryMap$ table, so
that given a State, its Catch's beginning State can be properly
retrieved. The Catch beginning state (which is also the ending State) is
the State where rethrown object's copy-ctor must take place.
LLVM currently stores nested catch handlers in post-ordering because
it's the natural way to compute the highest State in Catch.
The fix is to simply store TryCatch handler in pre-order, but update
Catch's highest State after child Catches are all processed.
Differential Revision: https://reviews.llvm.org/D79474?id=263919
Summary:
In the the given example, a stack slot pointer is merged
between a setjmp and longjmp. This pointer is spilled,
so it does not get correctly restored, addinga undefined
behaviour where it shouldn't.
Change-Id: I60ec010844f2a24ce01ceccf12eb5eba5ab94abb
Reviewers: eli.friedman, thanm, efriedma
Reviewed By: efriedma
Subscribers: MatzeB, qcolombet, tpr, rnk, efriedma, hiraditya, llvm-commits, chill
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77767
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
Before this patch, S_[L|G][THREAD32|DATA32] records were emitted with a simple name, not the fully qualified name (namespace + class scope).
Differential Revision: https://reviews.llvm.org/D79447
For now I have changed FoldConstantVectorArithmetic to return early
if we encounter a scalable vector, since the subsequent code assumes
you can perform lane-wise constant folds. However, in future work we
should be able to extend this to look at splats of a constant value
and fold those if possible. I have also added the same code to
FoldConstantArithmetic, since that deals with vectors too.
The warnings I fixed in this patch were being generated by this
existing test:
CodeGen/AArch64/sve-int-arith.ll
Differential Revision: https://reviews.llvm.org/D79421
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
Summary:
D78319 introduced basic support for inline asm input operands in GlobalISel.
However, that patch did not handle the case where a memory input operand still needs to
be indirectified. Later code asserts that the memory operand is already indirect.
This patch adds an early return false to trigger the SelectionDAG fallback for now.
Reviewers: arsenm, paquette
Reviewed By: arsenm
Subscribers: thakis, wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79955
I've created a new variant of CreateStackTemporary that takes
TypeSize and Align arguments, and made the older instances of
CreateStackTemporary call this new function. This refactoring is
in preparation for more patches in this area related to scalable
vectors and improving the alignment calculations.
Differential Revision: https://reviews.llvm.org/D79933
This patch adds support for DWARF attribute DW_AT_data_location.
Summary:
Dynamic arrays in fortran are described by array descriptor and
data allocation address. Former is mapped to DW_AT_location and
later is mapped to DW_AT_data_location.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79592
llvm rejects DWARF operator DW_OP_push_object_address.This DWARF
operator is needed for Flang to support allocatable array.
Summary:
Currently llvm rejects DWARF operator DW_OP_push_object_address.
below error is produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151)
warning: ignoring invalid debug info in pushobj.ll
[..]
There are some parts missing in support of this operator, need to
be completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79306
Summary:
In the patch D78849, it uses llvm::any_of to instead of for loop to
simplify the function addRequired().
It's obvious that above code is not a NFC conversion. Because any_of
will return if any addRequired(Reg) is true immediately, but we want
every element to call addRequired(Reg).
This patch uses for_range loop to fix above any_of bug.
Reviewed By: MaskRay, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D79872
Summary:
D78319 introduced basic support for inline asm input operands in GlobalISel.
However, that patch did not handle the case where a memory input operand still needs to
be indirectified. Later code asserts that the memory operand is already indirect.
This patch adds an early return false to trigger the SelectionDAG fallback for now.
Reviewers: arsenm, paquette
Reviewed By: arsenm
Subscribers: wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79955
We need to use it to handle <16 x double> indirect indexes
in the AMDGPU BE.
The only visible change from adding it is in ARM cost model.
To me it looks reasonable. With doubling a vector size it
quadruples the cost up to the size 8 and then it did only
double it. Now it also quadruples, which seems a logical
progression to me.
Actual AMDGPU code is to follow, this is a common part, plus
load/store legalization in the AMDGPU BE not to break what
works now.
Differential Revision: https://reviews.llvm.org/D79952
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Use an extra shift-by-1 instead of a compare and select to handle the
shift-by-zero case. This sometimes saves one instruction (if the compare
couldn't be combined with a previous instruction). It also works better
on targets that don't have good select instructions.
Note that currently this change doesn't affect most targets because
expandFunnelShift is not used because funnel shift intrinsics are
lowered early in SelectionDAGBuilder. But there is work afoot to change
that; see D77152.
Differential Revision: https://reviews.llvm.org/D77301
Expands on the enablement of the shouldSinkOperands() TLI hook in:
D79718
The last codegen/IR test diff shows what I suspected could happen - we were
sinking all splat shift operands into a loop. But that's not what we want in
general; we only want to sink the *shift amount* operand if it is a splat.
Differential Revision: https://reviews.llvm.org/D79827
It sounds like an interesting idea in theory, but nothing is actually
taking advantage of it, and specifying/implementing the edge cases is
painful. So just forbid it.
Differential Revision: https://reviews.llvm.org/D79814
Under MVE a vdup will always take a gpr register, not a floating point
value. During DAG combine we convert the types to a bitcast to an
integer in an attempt to fold the bitcast into other instructions. This
is OK, but only works inside the same basic block. To do the same trick
across a basic block boundary we need to convert the type in
codegenprepare, before the splat is sunk into the loop.
This adds a convertSplatType function to codegenprepare to do that,
putting bitcasts around the splat to force the type to an integer. There
is then some adjustment to the code in shouldSinkOperands to handle the
extra bitcasts.
Differential Revision: https://reviews.llvm.org/D78728
This patch extends DIModule Debug metadata in LLVM to support
Fortran modules. DIModule is extended to contain File and Line
fields, these fields will be used by Flang FE to create debug
information necessary for representing Fortran modules at IR level.
Furthermore DW_TAG_module is also extended to contain these fields.
If these fields are missing, debuggers like GDB won't be able to
show Fortran modules information correctly.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79484
GNU ld's internal linker script uses (https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=add44f8d5c5c05e08b11e033127a744d61c26aee)
.text :
{
*(.text.unlikely .text.*_unlikely .text.unlikely.*)
*(.text.exit .text.exit.*)
*(.text.startup .text.startup.*)
*(.text.hot .text.hot.*)
*(SORT(.text.sorted.*))
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf.em. */
*(.gnu.warning)
}
Because `*(.text.exit .text.exit.*)` is ordered before `*(.text .text.*)`, in a -ffunction-sections build, the C library function `exit` will be placed before other functions.
gold's `-z keep-text-section-prefix` has the same problem.
In lld, `-z keep-text-section-prefix` recognizes `.text.{exit,hot,startup,unlikely,unknown}.*`, but not `.text.{exit,hot,startup,unlikely,unknown}`, to avoid the strange placement problem.
In -fno-function-sections or -fno-unique-section-names mode, a function whose `function_section_prefix` is set to `.exit"`
will go to the output section `.text` instead of `.text.exit` when linked by lld.
To address the problem, append a dot to become `.text.exit.`
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D79600
Summary:
ConstantExprs involving operations on <1 x Ty> could translate into MIR
that failed to verify with:
*** Bad machine code: Reading virtual register without a def ***
The problem was that translate(const Constant &C, Register Reg) had
recursive calls that passed the same Reg in for the translation of a
subexpression, but without updating VMap for the subexpression first as
translate(const Constant &C, Register Reg) expects.
Fix this by using the same translateCopy helper function that we use for
translating Instructions. In some cases this causes extra G_COPY
MIR instructions to be generated.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45576
Reviewers: arsenm, volkan, t.p.northover, aditya_nandakumar
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78378
I have fixed up some places in SelectionDAG::getNode() where we
used to assert that the number of vector elements for two types
are the same. I have changed such cases to assert that the
element counts are the same instead. I've added new tests that
exercise the code paths for all the truncations. All the extend
operations are covered by this existing test:
CodeGen/AArch64/sve-sext-zext.ll
For the ISD::SETCC case I fixed this code path is exercised by
these existing tests:
CodeGen/AArch64/sve-fcmp.ll
CodeGen/AArch64/sve-intrinsics-int-compares-with-imm.ll
Differential Revision: https://reviews.llvm.org/D79399
allocas in LLVM IR have a specified alignment. When that alignment is
specified, the alloca has at least that alignment at runtime.
If the specified type of the alloca has a higher preferred alignment,
SelectionDAG currently ignores that specified alignment, and increases
the alignment. It does this even if it would trigger stack realignment.
I don't think this makes sense, so this patch changes that.
I was looking into this for SVE in particular: for SVE, overaligning
vscale'ed types is extra expensive because it requires realigning the
stack multiple times, or using dynamic allocation. (This currently isn't
implemented.)
I updated the expected assembly for a couple tests; in particular, for
arg-copy-elide.ll, the optimization in question does not increase the
alignment the way SelectionDAG normally would. For the rest, I just
increased the specified alignment on the allocas to match what
SelectionDAG was inferring.
Differential Revision: https://reviews.llvm.org/D79532
It is bad practice to capture by default (via [&] in this case) when
using lambdas, so we should avoid that as much as possible.
This patch fixes that in the getForwardingRegsDefinedByMI
from DwarfDebug module.
Differential Revision: https://reviews.llvm.org/D79616
We should use explicit type instead of auto type deduction when
the type is so obvious. In addition, we remove ambiguity, since auto
type deduction sometimes is not that intuitive, so that could lead
us to some unwanted behavior.
This patch fixes that in the collectCallSiteParameters() from
DwarfDebug module.
Differential Revision: https://reviews.llvm.org/D79624
We have the getNegatibleCost/getNegatedExpression to evaluate the cost and negate the expression.
However, during negating the expression, the cost might change as we are changing the DAG,
and then, hit the assertion if we negated the wrong expression as the cost is not trustful anymore.
This patch is target to remove the getNegatibleCost to avoid the out of sync with getNegatedExpression,
and check the cost during negating the expression. It also reduce the duplicated code between
getNegatibleCost and getNegatedExpression. And fix the crash for the test in D76638
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D77319
I don't have any test cases since X86 doesn't return any tied
operands from getUndefRegClearance today. But conceivably we could
want BreakFalseDeps to insert a dependency breaking XOR for
a tied operand in the future.
Currently this code exists in widenScalar for G_MERGE_VALUE
sources. I'm not sure if the existing expansion in widenScalar should
be removed or not. The widenScalar variant tries to extend to the
requested size, but this just uses the original bitwidth.
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
This fixes a verifier failure on a bot:
http://green.lab.llvm.org/green/job/test-suite-verify-machineinstrs-aarch64-O0-g/
```
*** Bad machine code: MBB has duplicate entries in its successor list. ***
- function: foo
- basic block: %bb.5 indirectgoto (0x7fe3d687ca08)
```
One of the GCC torture suite tests (pr70460.c) has an indirectbr instruction
which has duplicate blocks in its destination list.
According to the langref this is allowed:
> Blocks are allowed to occur multiple times in the destination list, though
> this isn’t particularly useful.
(https://www.llvm.org/docs/LangRef.html#indirectbr-instruction)
We don't allow this in MIR. So, when we translate such an instruction, the
verifier screams.
This patch makes `translateIndirectBr` check if a successor has already been
added to a block. If the successor is present, it is skipped rather than added
twice.
Differential Revision: https://reviews.llvm.org/D79609
them in a special text section.
For sampleFDO, because the optimized build uses profile generated from
previous release, previously we couldn't tell a function without profile
was truely cold or just newly created so we had to treat them conservatively
and put them in .text section instead of .text.unlikely. The result was when
we persuing the best performance by locking .text.hot and .text in memory,
we wasted a lot of memory to keep cold functions inside.
In https://reviews.llvm.org/D66374, we introduced profile symbol list to
discriminate functions being cold versus functions being newly added.
This mechanism works quite well for regular use cases in AutoFDO. However,
in some case, we can only have a partial profile when optimizing a target.
The partial profile may be an aggregated profile collected from many targets.
The profile symbol list method used for regular sampleFDO profile is not
applicable to partial profile use case because it may be too large and
introduce many false positives.
To solve the problem for partial profile use case, we provide an option called
--profile-unknown-in-special-section. For functions without profile, we will
still treat them conservatively in compiler optimizations -- for example,
treat them as warm instead of cold in inliner. When we use profile info to
add section prefix for functions, we will discriminate functions known to be
not cold versus functions without profile (being unknown), and we will put
functions being unknown in a special text section called .text.unknown.
Runtime system will have the flexibility to decide where to put the special
section in order to achieve a balance between performance and memory saving.
Differential Revision: https://reviews.llvm.org/D62540
If the SimplifyMultipleUseDemandedBits calls BITCASTs that peek through back to the original type then we can remove the BITCASTs entirely.
Differential Revision: https://reviews.llvm.org/D79572
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
CorrectExtraCFGEdges function.
The latter was a workaround for "Various pieces of code" leaving bogus
extra CFG edges in place. Where by "various" it meant only
IfConverter::MergeBlocks, which failed to clear all of the successors
of dead blocks it emptied out. This wouldn't matter a whole lot,
except that the dead blocks remained listed as predecessors of
still-useful blocks, inhibiting optimizations.
This fix slightly changed two thumb tests, because the correct CFG
successors allowed for the "diamond" if-conversion pattern to be
detected, when it could only use "simple" before.
Additionally, the removal of a now-redundant call to analyzeBranch
(with AllowModify=true) in BranchFolder::OptimizeFunction caused a
later check for an empty block in BranchFolder::OptimizeBlock to
fail. Correct this by moving the call to analyzeBranch in
OptimizeBlock higher.
Differential Revision: https://reviews.llvm.org/D79527
Summary:
This helps detect some missed BFI updates during CodeGenPrepare.
This is debug build only and disabled behind a flag.
Fix a missed update in CodeGenPrepare::dupRetToEnableTailCallOpts().
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77417
When peeling out the epilogue we need to ignore illegal phis coming from stages
greater than the producer stage. Otherwise we end up with circular phi
dependencies.
Differential Revision: https://reviews.llvm.org/D79581
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
Calling getShiftAmountTy with LegalTypes set may return a type that's too narrow to hold the shift amount for integer type it's applied to.
Fixes the regression introduced by D79096
Differential Revision: https://reviews.llvm.org/D79405
Try to combine N short vector cast ops into 1 wide vector cast op:
concat (cast X), (cast Y)... -> cast (concat X, Y...)
This is part of solving PR45794:
https://bugs.llvm.org/show_bug.cgi?id=45794
As noted in the code comment, this is uglier than I was hoping because
the opcode determines whether we pass the source or destination type
to isOperationLegalOrCustom(). Also IIUC, there's no way to validate
what the other (dest or src) type is. Without the extra legality check
on that, there's an ARM regression test in:
test/CodeGen/ARM/isel-v8i32-crash.ll
...that will crash trying to lower an unsupported v8f32 to v8i16.
Differential Revision: https://reviews.llvm.org/D79360
This patch adds ORE for MachinePipeliner, so that people can anaylyze
their code using opt-viewer or other tools, then optimize the code to
catch more piplining opportunities.
Reviewed By: bcahoon
Differential Revision: https://reviews.llvm.org/D79368
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
Summary:
I have fixed several places in getSplatSourceVector and isSplatValue
to work correctly with scalable vectors. I added new support for
the ISD::SPLAT_VECTOR DAG node as one of the obvious cases we can
support with scalable vectors. In other places I have tried to do
the sensible thing, such as bail out for vector types we don't yet
support or don't intend to support.
It's not possible to add IR test cases to cover these changes, since
they are currently only ever exercised on certain targets, e.g.
only X86 targets use the result of getSplatSourceVector. I've
assumed that X86 tests already exist to test these code paths for
fixed vectors. However, I have added some AArch64 unit tests that
test the specific functions I have changed.
Differential revision: https://reviews.llvm.org/D79083
Register live ranges may have had gaps that after coalescing should be
removed. This is done by adding a new segment to the range, and merging
it with neighboring segments. When doing so, do not assume that each
subrange of the register ended at the same index. If a subrange ended
earlier, adding this segment could make the live range invalid.
Instead, if the subrange is not live at the start of the segment,
extend it first.
Today symbol names generated for machine basic block sections use a
unary encoding to reduce bloat. This is essential when every basic block
in the binary is assigned a symbol however with basic block clusters
(rG05192e585ce175b55f2a26b83b4ed7882785c8e6) when we only need to
generate a few non-temporary symbols we can assign more descriptive
names making them more user friendly. With this change -
Cold cluster section for function foo is named "foo.cold"
Exception cluster section for function foo is named "foo.eh"
Other cluster sections identified by their ids are named "foo.ID"
Using this format works well with existing tools. It will demangle as
expected and works with existing symbolizers, profilers and debuggers
out of the box.
$ c++filt _Z3foov.cold
foo() [clone .cold]
$ c++filt _Z3foov.eh
foo() [clone .eh]
$c++filt _Z3foov.1234
foo() [clone 1234]
Tests for basicblock-sections are updated with some cleanup where
appropriate.
Differential Revision: https://reviews.llvm.org/D79221
Before this patch, global variables didn't have their namespace prepended in the Codeview debug symbol stream. This prevented Visual Studio from displaying them in the debugger (they appeared as 'unspecified error')
Differential Revision: https://reviews.llvm.org/D79028
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
The two code paths have the same goal, legalizing a load of a non-byte-sized vector by loading the "flattened" representation in memory, slicing off each single element and then building a vector out of those pieces.
The technique employed by `ExpandLoad` is slightly more convoluted and produces slightly better codegen on ARM, AMDGPU and x86 but suffers from some bugs (D78480) and is wrong for BE machines.
Differential Revision: https://reviews.llvm.org/D79096
rL368553 added SimplifyMultipleUseDemandedBits handling for ISD::TRUNCATE to SimplifyDemandedBits so we don't need to duplicate this (and it gets rid of another GetDemandedBits call which is slowly being replaced with SimplifyMultipleUseDemandedBits anyhow).
Also fix some cost tables for vXi1 types to match the costs entries for the types they will be promoted to.
Differential Revision: https://reviews.llvm.org/D79045
X86 matches several 'shift+xor' funnel shift patterns:
fold (or (srl (srl x1, 1), (xor y, 31)), (shl x0, y)) -> (fshl x0, x1, y)
fold (or (shl (shl x0, 1), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
fold (or (shl (add x0, x0), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
These patterns are also what we end up with the proposed expansion changes in D77301.
This patch moves these to DAGCombine's generic MatchFunnelPosNeg.
All existing X86 test cases still pass, and we just have a small codegen change in pr32282.ll.
Reviewed By: @spatel
Differential Revision: https://reviews.llvm.org/D78935
Summary:
This patch tries to ensure that we do something sensible when
generating code for the ISD::INSERT_VECTOR_ELT DAG node when operating
on scalable vectors. Previously we always returned 'undef' when
inserting an element into an out-of-bounds lane index, whereas now
we only do this for fixed length vectors. For scalable vectors it
is assumed that the backend will do the right thing in the same way
that we have to deal with variable lane indices.
In this patch I have permitted a few basic combinations for scalable
vector types where it makes sense, but in general avoided most cases
for now as they currently require the use of BUILD_VECTOR nodes.
This patch includes tests for all scalable vector types when inserting
into lane 0, but I've only included one or two vector types for other
cases such as variable lane inserts.
Differential Revision: https://reviews.llvm.org/D78992
Prior to D69446 I had done some NFC cleanup to make landing an iterative
outliner a cleaner more straight-forward patch. Since then, it seems that has
landed but I noticed some ways it could be cleaned up. Specifically:
1) doOutline was meant to be the re-runable function, but instead
runOnceOnModule was created that just calls doOutline.
2) In D69446 we discussed that the flag allowing the re-run of the
outliner should be a flag to tell how many additional times to run
the outliner again, not the total number of times. I don't think it
makes sense to introduce a flag, but print an error if the flag is
set to 0.
This is an NFCi, the i being that I get rid of the way that the
machine-outline-runs flag could be used to tell the outliner to not run
at all, and because I renamed the flag to '-machine-outliner-reruns'.
Differential Revision: https://reviews.llvm.org/D79070
Call getNegatedExpression(Cost) and check the Cost to make the code more clear.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D78347
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
The code assumed that zero-extending the integer constant to the
designated alloc size would be fine even for BE targets, but that's not
the case as that pulls in zeros from the MSB side while we actually
expect the padding zeros to go after the LSB.
I've changed the codepath handling the constant integers to use the
store size for both small(er than u64) and big constants and then add
zero padding right after that.
Differential Revision: https://reviews.llvm.org/D78011
like .cfi_restore"
Insert .cfi_offset/.cfi_register when IncomingCSRSaved of current block
is larger than OutgoingCSRSaved of its previous block.
Original commit message:
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
Summary:
Reviewing failures identified in D78586, I was finding the identifiers
for these iterators hard to read.
Reviewers: efriedma, MaskRay, jyknight
Reviewed By: MaskRay
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78849
The tl;dr story is that this causes jumps in the emitted line
tables, even at `-O0`. We could at some point consider more fancy
solutions to preserve locations, but it doesn't seem to be worth
the effort for now.
<rdar://problem/62460788>
Differential Revision: https://reviews.llvm.org/D78947
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
This is a NFC patch for D77319. The idea is to hide the getNegatibleCost inside the getNegatedExpression()
to have it return null if the cost is expensive, and add some helper function for easy to use. And
rename the old getNegatedExpression to negateExpression to avoid the semantic conflict.
Reviewed By: RKSimon
Differential revision: https://reviews.llvm.org/D78291
Summary:
Instead of adding a ".unlikely" or ".eh" suffix for machine basic blocks,
this change updates the behaviour to use an appropriate prefix
instead. This allows lld to group basic block sections together
when -z,keep-text-section-prefix is specified and matches the behaviour
observed in gcc.
Reviewers: tmsriram, mtrofin, efriedma
Reviewed By: tmsriram, efriedma
Subscribers: eli.friedman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78742
Follow-up of D78082 and D78590.
Otherwise, because xray_instr_map is now read-only, the absolute
relocation used for Sled.Function will cause a text relocation.
A previous bug fix for varargs introduced a regression where we would
incorrectly widen some stores to memory when passing i8/i16 parameters on the
stack. This didn't show up seemingly because it only happens when there is
no signext/zeroext parameter attribute, which I think for Darwin clang adds.
Swift however seems to be a different story, and a plain anyext on the parameter
triggered the bug.
To fix this, I've added a new ValueHandler::assignValueToAddress type override
which lets us distiguish between varargs and fixed args (we still need this
widening behaviour for varargs to fix the original bug in 2018).
rdar://61353552
Summary:
Add a check to make sure that MachineInstr::mayAlias returns prematurely if at least one of its instruction parameters does not access memory. This prevents calls to TargetInstrInfo::areMemAccessesTriviallyDisjoint with incompatible instructions.
A side effect of this change is to render the mayAlias helper in the AArch64 load/store optimizer obsolete. We can now directly call the MachineInstr::mayAlias member function.
Reviewers: hfinkel, t.p.northover, mcrosier, eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78823
Follow-up of D78082 (x86-64).
This change avoids dynamic relocations in `xray_instr_map` for ARM/AArch64/powerpc64le.
MIPS64 cannot use 64-bit PC-relative addresses because R_MIPS_PC64 is not defined.
Because MIPS32 shares the same code, for simplicity, we don't use PC-relative addresses for MIPS32 as well.
Tested on AArch64 Linux and ppc64le Linux.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D78590
Summary:
Given a VL=14 that is enveloped by a proper VL=16, splitting the
masked load using the enveloping halving VL=8/8 should yields
should eventually yield V=8/5. This fixes various assert failures
in getHalfNumVectorElementsVT() and IncrementMemoryAddress().
Note, I suspect similar fixes will be needed for other masked
operations, but for now I send out a fix for masked load only.
Bugzilla issue 45563
https://bugs.llvm.org/show_bug.cgi?id=45563
Reviewers: craig.topper, mehdi_amini, nicolasvasilache
Reviewed By: craig.topper
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78608
Using getValueType() is not correct for architectures extended with CHERI since
we need a pointer type and not the value that is loaded. While stack
protector is useless when you have CHERI (since CHERI provides much
stronger security guarantees), we still have a test to check that we can
generate correct code for checks. Merging b281138a1b
into our tree broke this test. Fix by using TLI.getFrameIndexTy().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D77785
Loosen the restriction on what kinds of opcodes can be CSEd as
targets may want to CSE some generic target specific pseudos.
NFC as far as this change is concerned as CSEConfig still pretty much is
a subset of this check.
Differential Revision: https://reviews.llvm.org/D78684
Summary:
Fix an issue where the presence of debug info could disable a peephole
optimization due to areCFlagsAccessedBetweenInstrs returning the wrong
result.
In test/CodeGen/AArch64/arm64-csel.ll, the issue was found in the
function @foo5, in which the first compare could successfully be
optimized but not the second.
Reviewers: t.p.northover, eastig, paquette
Subscribers: kristof.beyls, hiraditya, danielkiss, aprantl, dsanders, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78157
Summary:
Fix an issue where the presence of debug info could disable a peephole
optimization in optimizeCompareInstr due to canInstrSubstituteCmpInstr
returning the wrong result.
Depends on D78137.
Reviewers: t.p.northover, eastig, paquette
Subscribers: kristof.beyls, hiraditya, danielkiss, aprantl, llvm-commits, dsanders
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78151
Summary:
While lowering memory intrinsics, GIsel attempts to form a tail call to
a library routine.
There might be a DBG_LABEL or something after the intrinsic call,
though: in that case, GIsel should still be able to form the tail call,
and should also delete the debug insts after the tail call as the
transform makes them invalid.
Reviewers: dsanders, aemerson
Subscribers: hiraditya, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78335
Summary:
Fix an issue which could result in ElideBrByInvertingCond or
CombineIndexedLoadStore being missed when debug info is present. In both
cases the fix is s/hasOneUse/hasOneNonDbgUse/.
Reviewers: aemerson, dsanders
Subscribers: hiraditya, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78254
Summary:
This fixes several issues where the presence of debug instructions could
disable certain combines, due to dominance queries finding uses/defs that
don't actually exist.
Reviewers: dsanders, fhahn, paquette, aemerson
Subscribers: hiraditya, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78253
Summary:
It looks like RegBankSelect can try to assign a bank based on a
DBG_VALUE instead of ignoring it. This eventually leads to an assert
in AArch64RegisterBankInfo::getInstrMapping because there is some info
missing from the DBG_VALUE MachineOperand (I see: `Assertion failed:
(RawData != 0 && "Invalid Type"), function getScalarSizeInBits`).
I'm not 100% sure it's safe to insert DBG_VALUE instructions right
before RegBankSelect (that's what -debugify-and-strip-all-safe is
doing). Any advice appreciated.
Depends on D78135.
Reviewers: ab, qcolombet, dsanders, aprantl
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78137
Summary:
These helpers are exercised by follow-up commits in this patch series,
which is all about removing CodeGen differences with vs. without debug
info in the AArch64 backend.
Reviewers: fhahn, aprantl, jpaquette, paquette
Subscribers: kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78260
Summary:
Teach MachineDebugify how to insert DBG_VALUE instructions. This can
help find bugs causing CodeGen differences when debug info is present.
DBG_VALUE instructions are only emitted when -debugify-level is set to
locations+variables.
There is essentially no attempt made to match up DBG_VALUE register
operands with the local variables they ought to correspond to. I'm not
sure how to improve the situation. In some cases (MachineMemOperand?)
it's possible to find the IR instruction a MachineInstr corresponds to,
but in general this seems to call for "undoing" the work done by ISel.
Reviewers: dsanders, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78135
Summary:
Make GenericScheduler compute SchedDFSResult on initialization if
the policy is set. This makes it possible to create classes
that extend GenericScheduler and rely on the results of SchedDFSResult,
e.g. to perform subtree scheduling.
NFC unless the policy is set.
Subscribers: MatzeB, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78432
Preserving liveness can be useful even late in the pipeline, if we're
doing substantial optimization work afterwards. (See, for example,
D76065.) Teach MachineOutliner how to correctly set live-ins on the
basic block in outlined functions.
Differential Revision: https://reviews.llvm.org/D78605
Hash Jump Table Indices uniquely within a basic block for MIR
Canonicalizer / MIR VReg Renamer passes.
Differential Revision: https://reviews.llvm.org/D77966
We were disabling verification for no reason in a bunch of places; just
turn it on.
At this point, there are two key places where we don't run verification:
during register allocation, and after addPreEmitPass. Regalloc probably
isn't worth messing with; it has its own invariants, and verifying
afterwards is probably good enough. For after addPreEmitPass, it's
probably worth investigating improvements.
In a future change we should properly fix xray_fn_idx to use PC-relative
addresses as well, but for now let's keep absolute addresses until sled
addresses are all fixed.
Summary:
Machine Block Frequency Info (MBFI) is being computed but unused in AsmPrinter.
MBFI computation was introduced with PGO change D71149 and then its use was
removed in D71106. No need to keep computing it.
Reviewers: MaskRay, jyknight, skan, yamauchi, davidxl, efriedma, huihuiz
Reviewed By: MaskRay, skan, yamauchi
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78526
xray_instr_map contains absolute addresses of sleds, which are relocated
by `R_*_RELATIVE` when linked in -pie or -shared mode.
By making these addresses relative to PC, we can avoid the dynamic
relocations and remove the SHF_WRITE flag from xray_instr_map. We can
thus save VM pages containg xray_instr_map (because they are not
modified).
This patch changes x86-64 and bumps the sled version to 2. Subsequent
changes will change powerpc64le and AArch64.
Reviewed By: dberris, ianlevesque
Differential Revision: https://reviews.llvm.org/D78082
Summary:
The repeated use of std::next() on a MachineBasicBlock::iterator was
clever, but we only need to reconstruct the iterator post creation of
the spill instruction.
This helps simplifying where we plan to place the spill, as discussed in
D77849.
From here, we can simplify the code a little by flipping the return code
of a helper.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: qcolombet, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78520
- Adding changes to support comments on outlined functions with outlining for the conditions through which it was outlined (e.g. Thunks, Tail calls)
- Adapts the emitFunctionHeader to print out a comment next to the header if the target specifies it based on information in MachineFunctionInfo
- Adds mir test for function annotiation
Differential Revision: https://reviews.llvm.org/D78062
Summary:
Similar to the CallLowering class used for lowering LLVM IR calls to MIR calls,
we introduce a separate class for lowering LLVM IR inline asm to MIR INLINEASM.
There is no functional change yet, all existing tests should pass.
Reviewers: arsenm, dsanders, aemerson, volkan, t.p.northover, paquette
Reviewed By: aemerson
Subscribers: gargaroff, wdng, mgorny, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78316
Summary:
The patch D29014 has added the new ISD::FREEZE and can deal with the
integer.
The patch D76980 has added SoftenFloatRes_FREEZE for float point.
But we still lack of expand for ppc_fp128, this will cause assertion for
some cases.
This patch is to support freeze expand for ppc_fp128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78278
[MachineOutliner] fix test for excluding CFI and add test to include CFI in outlining
New test to check that we only outline CFI instruction if all CFI
Instructions in the function would be captured by the outlining
adding x86 tests analagous to AARCH64 cfi tests
Revision: https://reviews.llvm.org/D77852
We should only modify existing ones. Previously, we were creating
MachineFunctions for externally-available functions. AFAICT this was benign
in tree but ultimately led to asan bugs in our out of tree target.
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
Summary:
AIX symbol have qualname and unqualified name. The stock getSymbol
could only return unqualified name, which leads us to patch many
caller side(lowerConstant, getMCSymbolForTOCPseudoMO).
So we should try to address this problem in the callee
side(getSymbol) and clean up the caller side instead.
Note: this is a "mostly" NFC patch, with a fix for the original
lowerConstant behavior.
Differential Revision: https://reviews.llvm.org/D78045
This allows targets to know exactly which operands are contributing to
the dependency, which is required for targets with per-operand
scheduling models.
Differential Revision: https://reviews.llvm.org/D77135
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
Ensure that symbols explicitly* assigned a section name are placed into
a section with a compatible entry size.
This is done by creating multiple sections with the same name** if
incompatible symbols are explicitly given the name of an incompatible
section, whilst:
- Avoiding using uniqued sections where possible (for readability and
to maximize compatibly with assemblers).
- Creating as few SHF_MERGE sections as possible (for efficiency).
Given that each symbol is assigned to a section in a single pass, we
must decide which section each symbol is assigned to without seeing the
properties of all symbols. A stable and easy to understand assignment is
desirable. The following rules facilitate this: The "generic" section
for a given section name will be mergeable if the name is a mergeable
"default" section name (such as .debug_str), a mergeable "implicit"
section name (such as .rodata.str2.2), or MC has already created a
mergeable "generic" section for the given section name (e.g. in response
to a section directive in inline assembly). Otherwise, the "generic"
section for a given name is non-mergeable; and, non-mergeable symbols
are assigned to the "generic" section, while mergeable symbols are
assigned to uniqued sections.
Terminology:
"default" sections are those always created by MC initially, e.g. .text
or .debug_str.
"implicit" sections are those created normally by MC in response to the
symbols that it encounters, i.e. in the absence of an explicit section
name assignment on the symbol, e.g. a function foo might be placed into
a .text.foo section.
"generic" sections are those that are referred to when a unique section
ID is not supplied, e.g. if there are multiple unique .bob sections then
".quad .bob" will reference the generic .bob section. Typically, the
generic section is just the first section of a given name to be created.
Default sections are always generic.
* Typically, section names might be explicitly assigned in source code
using a language extension e.g. a section attribute: _attribute_
((section ("section-name"))) -
https://clang.llvm.org/docs/AttributeReference.html
** I refer to such sections as unique/uniqued sections. In assembly the
", unique," assembly syntax is used to express such sections.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43457.
See https://reviews.llvm.org/D68101 for previous discussions leading to
this patch.
Some minor fixes were required to LLVM's tests, for tests had been using
the old behavior - which allowed for explicitly assigning globals with
incompatible entry sizes to a section.
This fix relies on the ",unique ," assembly feature. This feature is not
available until bintuils version 2.35
(https://sourceware.org/bugzilla/show_bug.cgi?id=25380). If the
integrated assembler is not being used then we avoid using this feature
for compatibility and instead try to place mergeable symbols into
non-mergeable sections or issue an error otherwise.
Differential Revision: https://reviews.llvm.org/D72194
Summary:
Original description (https://reviews.llvm/org/D69924)
Without this change, when a nested tag type of any kind (enum, class,
struct, union) is used as a variable type, it is emitted without
emitting the parent type. In CodeView, parent types point to their inner
types, and inner types do not point back to their parents. We already
walk over all of the parent scopes to build the fully qualified name.
This change simply requests their type indices as we go along to enusre
they are all emitted.
Now, while walking over the parent scopes, add the types to
DeferredCompleteTypes, since they might already be in the process of
being emitted.
Fixes PR43905
Reviewers: rnk, amccarth
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78249
Summary:
This verifier tries to ensure that DebugLoc's don't just disappear as
we transform the MIR. It observes the instructions created, erased, and
changed and at checkpoints chosen by the client algorithm verifies the
locations affected by those changes.
In particular, it verifies that:
* Every DebugLoc for an erased/changing instruction is still present on
at least one new/changed instruction
* Failing that, that there is a line-0 location in the new/changed
instructions. It's not possible to confirm which locations were merged so
it conservatively assumes all unaccounted for locations are accounted
for by any line-0 location to avoid false positives.
If that fails, it prints the lost locations in the debug output along with
the instructions that should have accounted for them.
In theory, this is usable by the legalizer, combiner, selector and any other
pass that performs incremental changes to the MIR. However, it has so far
only really been tested on the legalizer (not including the artifact
combiner) where it has caught lots of lost locations, particularly in Custom
legalizations. There's only one example here as my initial testing was on an
out-of-tree target and I haven't done a pass over the in-tree targets yet.
Depends on D77575, D77446
Reviewers: bogner, aprantl, vsk
Subscribers: jvesely, nhaehnle, mgorny, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77576
Summary:
This will allow us to fix the issue where the lost locations
verifier causes CodeGen changes on lost locations because it
falls back on DAGISel
Reviewers: qcolombet, bogner, aprantl, vsk, paquette
Subscribers: rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78261
BreakPHIEdge would be set based on whether the instruction needs to
insert a new critical edge to allow sinking into a block where the uses
are PHI nodes. But for instructions with multiple defs it would be reset
on the second def, allowing the instruciton to sink where it should not.
Fixes PR44981
Differential Revision: https://reviews.llvm.org/D78087
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
Summary:
The current handleMoveIntoBundle implementation is unusable,
it attempts to access the slot indexes of bundled instructions.
It also leaves bundled instructions with slot indexes assigned.
Replace handleMoveIntoBundle this with a more explicit
handleMoveIntoNewBundle function which recalculates the live
intervals for all instructions moved into a newly formed bundle,
and removes slot indexes from these instructions.
Reviewers: arsenm, MaskRay, kariddi, tpr, qcolombet
Reviewed By: qcolombet
Subscribers: MatzeB, wdng, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77969
In D68209, LiveDebugValues::transferDebugValue had a call to
OpenRanges.erase shifted, and by accident this led to a code path where
DBG_VALUEs of $noreg would not have their open range terminated, allowing
variable locations to extend past blocks where they were terminated.
This patch correctly terminates the open range, if present, when such a
DBG_VAUE is encountered, and adds a test for this behaviour.
Differential Revision: https://reviews.llvm.org/D78218
The "Align" passed into getMachineMemOperand etc. is the alignment of
the MachinePointerInfo, not the alignment of the memory operation.
(getAlign() on a MachineMemOperand automatically reduces the alignment
to account for this.)
We were passing on wrong (overconservative) alignment in a bunch of
places. Fix a bunch of these, mostly in legalization. And while I'm
here, switch to the new Align APIs.
The test changes are all scheduling changes: the biggest effect of
preserving large alignments is that it improves alias analysis, so the
scheduler has more freedom.
(I was originally just trying to do a minor cleanup in
SelectionDAGBuilder, but I accidentally went deeper down the rabbit
hole.)
Differential Revision: https://reviews.llvm.org/D77687
Summary:
As a follow up to https://reviews.llvm.org/D29014, add translation
support for freeze.
Introduce a new generic instruction G_FREEZE and translate freeze to it.
Reviewers: dsanders, aqjune, arsenm, aditya_nandakumar, t.p.northover, lebedev.ri, paquette, aemerson
Reviewed By: aqjune, arsenm
Subscribers: fhahn, lebedev.ri, wdng, rovka, hiraditya, jfb, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77795
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
To simplify future work on statepoint representation, hide
direct access to statepoint field indices and provide getters
for them. Add getters for couple more statepoint fields.
This also fixes two bugs in MachineVerifier for statepoint:
First, the `break` statement was falling out of `if` statement
scope, thus disabling following checks.
Second, it was incorrectly accessing some fields like CallingConv -
StatepointOpers gives index to their value directly, not to
preceeding field type encoding.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D78119
This is a minor NFC change to make the code more clear. We have the NegatibleCost that
has cheaper, neutral, and expensive. Typically, the smaller one means the less cost.
It is inverse for current implementation, which makes following code not easy to read.
If (CostX > CostY) negate(X)
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D77993
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
in the same section.
This allows specifying BasicBlock clusters like the following example:
!foo
!!0 1 2
!!4
This places basic blocks 0, 1, and 2 in one section in this order, and
places basic block #4 in a single section of its own.
Summary:
Share logic to strip debugify metadata between the IR and MIR level
debugify passes. This makes it simpler to hunt for bugs by diffing IR
with vs. without -debugify-each turned on.
As a drive-by, fix an issue causing CallGraphNodes to become invalid
when a dead llvm.dbg.value prototype is deleted.
Reviewers: dsanders, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77915
Since 1725f28841, this should check
isFMADLegalForFAddFSub rather than the the plain isOperationLegal.
This would assert in a subset of cases due to an oddity in how FMAD is
selected. We will allow FMA formation pre-legalize, but not FMAD even
in cases where it would be valid.
The current hook requires passing in the root fadd/fsub. However, in
this distributed case, this would be far more complicated to pass in
the relevant operand. AMDGPU doesn't get any value from the node, and
only needs the type and is the only implementor, so I'm not sure why
we have this complexity. Just rename and expand the assert to avoid
the more complicated checks spread through the distribution logic.
Sometimes LegalizeTypes knows about common subexpressions before SelectionDAG
does, leading to accidental SDValue removal before its reference count was
truly zero.
Differential Revision: https://reviews.llvm.org/D76994
Reviewed-By: bjope
Fixes: https://bugs.llvm.org/show_bug.cgi?id=45049
Reverted in 3ce77142a6 because the previous patch
broke the expensive-checks bots. The new patch removes the broken check.
Summary: A count profile may affect tail duplication's heuristic causing a block to be duplicated in only a part of its predecessors. This is not allowed in the Machine Block Placement pass where an assert will go off. I'm removing the assert and making the optimization bail out when such case happens.
Reviewers: wenlei, davidxl, Carrot
Reviewed By: Carrot
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77748
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
This is the same as what was done to the CallLoweringInfo in
TargetLowering.h in r309159.
This is just a step on the way to replacing this with CallBase.
I only left it at the interface to ParseConstraints since that
needs updates to other callers in different files. I'll do that
as a follow up.
Differential Revision: https://reviews.llvm.org/D77892
Summary:
This allows us to test each backend pass under the presence
of debug info using pre-existing tests. The tests should not
fail as a result of this so long as it's true that debug info
does not affect CodeGen.
In practice, a few tests are sensitive to this:
* Tests that check the pass structure (e.g. O0-pipeline.ll)
* Tests that check --debug output. Specifically instruction
dumps containing MMO's (e.g. prelegalizercombiner-extends.ll)
* Tests that contain debugify metadata as mir-strip-debug will
remove it (e.g. fastisel-debugvalue-undef.ll)
* Tests with partial debug info (e.g.
patchable-function-entry-empty.mir had debug info but no
!llvm.dbg.cu)
* Tests that check optimization remarks overly strictly (e.g.
prologue-epilogue-remarks.mir)
* Tests that would inject the pass in an unsafe region (e.g.
seqpairspill.mir would inject between register alloc and
virt reg rewriter)
In all cases, the checks can either be updated or
--debugify-and-strip-all-safe=0 can be used to avoid being
affected by something like llvm-lit -Dllc='llc --debugify-and-strip-all-safe'
I tested this without the lost debug locations verifier to
confirm that AArch64 behaviour is unaffected (with the fixes
in this patch) and with it to confirm it finds the problems
without the additional RUN lines we had before.
Depends on D77886, D77887, D77747
Reviewers: aprantl, vsk, bogner
Subscribers: qcolombet, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77888
Summary:
A few tests start out with debug info and expect it to reach
the output. For these tests we shouldn't strip the debug info
Reviewers: aprantl, vsk, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77886
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
Summary:
At the moment, any changes we make to the passes that can be
injected before/after others (e.g. -verify-machineinstrs and
-print-after-all) have to be duplicated in both
TargetPassConfig (for normal execution, -start-before/
-stop-before/etc) and llc (for -run-pass). Unify this pass
injection into addMachinePrePass/addMachinePostPass that both
TargetPassConfig and llc can use.
Reviewers: vsk, aprantl, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77887
Summary:
Refactor LiveRangeCalc such that it is now split into two classes
The objective is to split all the "register specific" logic away
from LiveRangeCalc.
The two new classes created are:
- LiveRangeCalc - is meant as a generic class to compute and modify
live ranges in a generic way. This class should deal only with
SlotIndices and VNInfo objects.
- LiveIntervalCals - is meant to be equivalent to the old LiveRangeCalc.
It computes the liveness virtual registers tracked by a LiveInterval
object.
With this refactoring LiveRangeCalc can be used to implement tracking of
liveness of LiveRanges that represent other things than just registers.
Subscribers: MatzeB, qcolombet, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76584
Remove a number of includes that aren't necessary (nor are we relying on the remaining includes to provide the declarations), we just needed a llvm::Instruction forward declaration.
This exposed a couple of source files that were implicitly replying on the includes for their use of llvm::SmallSet or std::set, requiring local includes to be added there instead.
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, danstrushin
Reviewed By: dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77797
Summary:
Removes:
* All LLVM-IR level debug info using StripDebugInfo()
* All debugify metadata
* 'Debug Info Version' module flag
* All (valid*) DEBUG_VALUE MachineInstrs
* All DebugLocs from MachineInstrs
This is a more complete solution than the previous MIRPrinter
option that just causes it to neglect to print debug-locations.
* The qualifier 'valid' is used here because AArch64 emits
an invalid one and tests depend on it
Reviewers: vsk, aprantl, bogner
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77747
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, dantrushin
Reviewed By: reames, dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77371
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
Summary:
Preserve call site info for duplicated instructions. We copy over the
call site info in CloneMachineInstrBundle to avoid repeated calls to
copyCallSiteInfo in CloneMachineInstr.
(Alternatively, we could copy call site info higher up the stack, e.g.
into TargetInstrInfo::duplicate, or even into individual backend passes.
However, I don't see how that would be safer or more general than the
current approach.)
Reviewers: aprantl, djtodoro, dstenb
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77685
This is a performance patch that hoists two conditions in DwarfDebug's
validThroughout to avoid a linear-scan of all instructions in a block. We
now exit early if validThrougout will never return true for the variable
location.
The first added clause filters for the two circumstances where
validThroughout will return true. The second added clause should be
identical to the one that's deleted from after the linear-scan.
Differential Revision: https://reviews.llvm.org/D77639
Summary:
This fixes PR45302.
Previously the case
BB1
/ \
| |
TBB FBB
| |
\ /
BB2
was treated as a valid diamond also when TBB and FBB was the same basic
block. This then lead to a failed assertion in IfConvertDiamond.
Since TBB == FBB is quite a degenerated case of a diamond, we now
don't treat it as a valid diamond anymore, and thus we will avoid the
trouble of making IfConvertDiamond handle it correctly.
Reviewers: efriedma, kparzysz
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77651
Summary:
When narrowing G_IMPLICIT_DEF where the original size is not a multiple
of the narrow size, emit a smaller G_IMPLICIT_DEF and use G_ANYEXT.
To prevent a potential endless loop in the legalizer, the condition
to combine G_ANYEXT(G_IMPLICIT_DEF) is changed from isInstUnsupported
to !isInstLegal, since in this case the combine is only valid if
consequent legalization of the newly combined G_IMPLICIT_DEF does not
introduce G_ANYEXT due to narrowing.
Although this legalization for G_IMPLICIT_DEF would also be valid for
the general case, it actually caused a lot of code regressions when
tried due to superfluous COPYs and combines not getting hit anymore.
Reviewers: dsanders, aemerson, volkan, arsenm, aditya_nandakumar
Reviewed By: arsenm
Subscribers: jvesely, nhaehnle, kerbowa, wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76598
Summary:
Re-used the IR-level debugify for the most part. The MIR-level code then
adds locations to the MachineInstrs afterwards based on the LLVM-IR debug
info.
It's worth mentioning that the resulting locations make little sense as
the range of line numbers used in a Function at the MIR level exceeds that
of the equivelent IR level function. As such, MachineInstrs can appear to
originate from outside the subprogram scope (and from other subprogram
scopes). However, it doesn't seem worth worrying about as the source is
imaginary anyway.
There's a few high level goals this pass works towards:
* We should be able to debugify our .ll/.mir in the lit tests without
changing the checks and still pass them. I.e. Debug info should not change
codegen. Combining this with a strip-debug pass should enable this. The
main issue I ran into without the strip-debug pass was instructions with MMO's and
checks on both the instruction and the MMO as the debug-location is
between them. I currently have a simple hack in the MIRPrinter to
resolve that but the more general solution is a proper strip-debug pass.
* We should be able to test that GlobalISel does not lose debug info. I
recently found that the legalizer can be unexpectedly lossy in seemingly
simple cases (e.g. expanding one instr into many). I have a verifier
(will be posted separately) that can be integrated with passes that use
the observer interface and will catch location loss (it does not verify
correctness, just that there's zero lossage). It is a little conservative
as the line-0 locations that arise from conflicts do not track the
conflicting locations but it can still catch a fair bit.
Depends on D77439, D77438
Reviewers: aprantl, bogner, vsk
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77446
This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
RDA sometimes needs to visit blocks twice, to take into account
reaching defs coming in along loop back edges. Currently it handles
repeated visitation the same way as usual, which means that it will
scan through all instructions and their reg unit defs again. Not
only is this very inefficient, it also means that all reaching defs
in loops are going to be inserted twice.
We can do much better than this. The only thing we need to handle
is a new reaching def from a predecessor, which either needs to be
prepended to the reaching definitions (if there was no reaching def
from a predecessor), or needs to replace an existing predecessor
reaching def, if it is more recent. Since D77508 we only store the
most recent predecessor reaching def, so that's the only one that
may need updating.
This also has the nice side-effect that reaching definitions are
now automatically sorted and unique, so drop the llvm::sort() call
in favor of an assertion.
Differential Revision: https://reviews.llvm.org/D77511
An instruction may define the same reg unit multiple times,
avoid inserting the same reaching def multiple times in that case.
Also print the reg unit, rather than the super-register, in the
debug code.
Move the logic whether lowering of deopt value requires a spill slot in
a separate lambda.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77629
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
Summary:
In lieu of a proper pass that strips debug info, add a way
to omit debug-locations from the MIR output so that
instructions with MMO's continue to match CHECK's when
mir-debugify is used
Reviewers: aprantl, bogner, vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77575
Summary:
To debugify MIR, we need to be able to create metadata and to do that, we
need a non-const Module. However, MachineFunction only had a const reference
to the Function preventing this.
Reviewers: aprantl, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77439
A global symbol that is defined in a comdat should not generate an alias since
call sites that would've referred to that symbol will refer to their own
independent local aliases rather than the surviving global comdat one. This
could result in something that looks like:
```
ld.lld: error: relocation refers to a discarded section: .text._ZN3fbl8internal18NullFunctionTargetIvJjjPjEED1Ev.stub
>>> defined in user-x64-clang/obj/system/ulib/minfs/libminfs.a(minfs._sources.file.cc.o)
>>> section group signature: _ZN3fbl8internal18NullFunctionTargetIvJjjPjEED1Ev.stub
>>> prevailing definition is in user-x64-clang/obj/system/ulib/minfs/libminfs.a(minfs._sources.vnode.cc.o)
>>> referenced by function.h:169 (../../zircon/system/ulib/fbl/include/fbl/function.h:169)
>>> minfs._sources.file.cc.o:(minfs::File::AllocateAndCommitData(std::__2::unique_ptr<minfs::Transaction, std::__2::default_delete<minfs::Transaction> >)) in archive user-x64-clang/obj/system/ulib/minfs/libminfs.a
```
We ran into this when experimenting with a new C++ ABI for fuchsia
(refer to D72959) which takes relative offsets between comdat'd functions
which is why the normal C++ user wouldn't run into this.
Differential Revision: https://reviews.llvm.org/D77429
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
When entering a basic block, RDA inserts reaching definitions coming
from predecessor blocks (which will be negative numbers) in a rather
peculiar way. If you have incoming reaching definitions -4, -3, -2, -1,
it will insert those. If you have incoming reaching definitions
-1, -2, -3, -4, it will insert -1, -1, -1, -1, as the max is taken
at each step. That's probably not what was intended...
However, RDA only actually cares about the most recent reaching
definition from a predecessor (to calculate clearance), so this
ends up working fine as far as behavior is concerned. It does
waste memory on unnecessary reaching definitions though.
This patch changes the implementation to first compute the most
recent reaching definition in one loop, and then insert only that
one in a separate loop.
Differential Revision: https://reviews.llvm.org/D77508
At the end of a basic block, RDA adjusts all the reaching defs it
found to be relative to the end of the basic block, rather than the
start of it. However, it also does this to registers which don't
have a reaching def, indicated by ReachingDefDefaultVal. This means
that code checking against ReachingDefDefaultVal will not skip them,
and may insert them into the reaching definition list. This is
ultimately harmless, but causes unnecessary work and is logically
not right.
Differential Revision: https://reviews.llvm.org/D77506
Summary:
This patch adds support for emission of following DWARFv5 macro forms
in .debug_macro section.
1. DW_MACRO_start_file
2. DW_MACRO_end_file
3. DW_MACRO_define_strp
4. DW_MACRO_undef_strp.
Reviewed By: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D72828
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
We're ANDing with 1 right after which will cause the SIGN_EXTEND to
be combined to ANY_EXTEND later. Might as well just start with an
ANY_EXTEND.
While there replace create the AND using the getZeroExtendInReg
helper to remove the need to explicitly create the VecOnes constant.
This code is replacing a shift with a new shift on an extended type.
If the shift amount type can't represent the maximum shift amount
for the new type, the amount needs to be extended to a type that
can.
Previously, the code just hardcoded a check for 256 bits which
seems to have been an assumption that the original shift amount
was MVT::i8. But that seems more catered to a specific target
like X86 that uses i8 as its legal shift amount type. Other
targets may use different types.
This commit changes the code to look at the real type of the shift
amount and makes sure it has enough bits for the Log2 of the
new type. There are similar checks to this in SelectionDAGBuilder
and LegalizeIntegerTypes.
Previously line table symbol was represented as `DIE::value_iterator`
inside `DwarfCompileUnit` and subsequent function `intStmtList`
was used to create a local `MCSymbol` to initialize it.
This patch removes `DIE::value_iterator` from `DwarfCompileUnit`
and intoduce `MCSymbol` for representing this units symbol for
`debug_line` section. As a result `applyStmtList` is also modified
to utilize this. Further more a helper function `getLineTableStartSym`
is also introduced to get this symbol, this would be used by clients
which need to access this line table, i.e `debug_macro`.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D77489
The newly-created constant zero will need an extra register to hold it
in the current statepoint lowering implementation. Remove it if there
exists one.
Summary:
D77423 started using a dominator tree in WasmEHPrepare, but we deleted
BBs in `prepareThrows` before we used the domtree in `prepareEHPads`,
and those CFG changes were not reflected in the domtree. This uses
`DomTreeUpdater` to make sure we update the domtree every time we delete
BBs from the CFG. This fixes ubsan/msan/expensive_check errors caught in
LLVM buildbots.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77465
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
Summary:
For current architect, we always require setContainingCsect to be
called on every MCSymbol got used in XCOFF context.
This is very hard to achieve because symbols gets created everywhere
and other MCSymbol types(ELF, COFF) do not have similar rules.
It's very easy to miss setting the containing csect, and we would
need to add a lot of XCOFF specialized code around some common code area.
This patch intendeds to do
1. Rely on getFragment().getParent() to get csect from labels.
2. Only use get/setRepresentedCsect (was get/setContainingCsect)
if symbol itself represents a csect.
Reviewers: DiggerLin, hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D77080
Summary: I think it would be better to require the alignment to be >= 1. It is currently confusing to allow both values.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77372
isGCValue should detect whether the deopt value is a GC pointer.
Currently it checks by finding the value in SI.Bases and SI.Ptrs.
However these data structures contain only those values which
have corresponding gc.relocate call. So we can miss GC value if it
does not have gc.relocate call (dead after the call).
Check GC strategy whether pointer is GC one or consider any pointer
to be GC one conservatively.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77130
When compiling AMDGPUDisassembler.cpp in a stage 1 trunk build with
CMAKE_BUILD_TYPE=RelWithDebInfo LLVM_USE_SANITIZER=Address LiveDebugVariables
accounts for 21.5% wall clock time. This fix reduces that to 1.2% by switching
out a linked list lookup with a map lookup.
Note that the linked list is still used to group UserValues by vreg. The vreg
lookups don't cause any problems in this pathological case.
This is the same idea as D68816, which was reverted, except that it is a less
intrusive fix.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D77226
The legalizer has a tendency to lose DebugLoc's when expanding or
combining instructions. The verifier that detected these isn't ready
for upstreaming yet but this patch fixes the cases that came up when
applying it to our out-of-tree backend's CodeGen tests.
This pattern comes up a few more times in this file and probably in
the backends too but I'd prefer to fix the others separately (and
preferably when the lost-location verifier detects them).
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
Currently, DAG combiner uses (fmul (rsqrt x) x) to estimate square
root of x. However, this method would return NaN if x is +Inf, which
is incorrect.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76853
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
The attached test case is simplified from tcmalloc. Both function calls should be optimized as tailcall. But llvm can only optimize the first call. The second call can't be optimized because function dupRetToEnableTailCallOpts failed to duplicate ret into block case2.
There 2 problems blocked the duplication:
1 Intrinsic call llvm.assume is not handled by dupRetToEnableTailCallOpts.
2 The control flow is more complex than expected, dupRetToEnableTailCallOpts can only duplicate ret into its predecessor, but here we have an intermediate block between call and ret.
The solutions:
1 Since CodeGenPrepare is already at the end of LLVM IR phase, we can simply delete the intrinsic call to llvm.assume.
2 A general solution to the complex control flow is hard, but for this case, after exit2 is duplicated into case1, exit2 is the only successor of exit1 and exit1 is the only predecessor of exit2, so they can be combined through eliminateFallThrough. But this function is called too late, there is no more dupRetToEnableTailCallOpts after it. We can add an earlier call to eliminateFallThrough to solve it.
Differential Revision: https://reviews.llvm.org/D76539
Summary:
In method SelectionDAGBuilder::LowerStatepoint, array SI.GCTransitionArgs
is initialized from wrong part of ImmutableStatepoint class.
We copy gc args instead of transitions args.
Reviewers: reames, skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77075
When we have
```
a = G_OR x, x
```
or
```
b = G_AND y, y
```
We can drop the G_OR/G_AND and just use x/y respectively.
Also update arm64-fallback.ll because there was an or in there which hits this
transformation.
Differential Revision: https://reviews.llvm.org/D77105
Implement identity combines for operations like the following:
```
%a = G_SUB %b, 0
```
This can just be replaced with %b.
Over CTMark, this gives some minor size improvements at -O3.
Differential Revision: https://reviews.llvm.org/D76640
This reverts commit b3297ef051.
This change is incorrect. The current semantic of null in the IR is a
pointer with the bitvalue 0. It is not a cast from an integer 0, so
this should preserve the pointer type.
Summary:
This code was throwing away the opcode for a boolean, which was then
reconstructing the opcode from that boolean. Just pass the opcode, and
forget the boolean.
Reviewers: srhines
Reviewed By: srhines
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77100
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
There was already a test case for landingpads to handle this case, but I
had forgotten to consider PHI instructions preceding the EH_LABEL in the
landingpad.
PR45261
MC already knows how to emulate the .weak directive (with its ELF
semantics; i.e., an undefined weak symbol resolves to 0, and a defined
weak symbol has lower link precedence than a strong symbol of the same
name) using COFF weak externals. Plumb this through the ASM printer too,
so that definitions marked with __attribute__((weak)) at the language
level (which gets translated to weak linkage at the IR level) have the
corresponding .weak directive emitted. Note that declarations marked
with __attribute__((weak)) at the language level (which translates to
extern_weak at the IR level) already have .weak directives emitted.
Weak*/linkonce* symbols without an associated comdat (in particular, ones
generated with __attribute__((weak)) in C/C++) were earlier emitted as
normal unique globals, as the comdat is required to provide the linkonce
semantics. This change makes sure they are emitted as .weak instead,
allowing other symbols to override them.
Rename the existing coff-weak.ll test to coff-linkonce.ll. I'm not
quite sure what that test covers, since the behavior being tested in it
(the emission of a one_only section) is just a result of passing
-function-sections to llc; the linkonce_odr makes no difference.
Add a new coff-weak.ll which tests the new directive emission.
Based on an previous patch by Shoaib Meenai.
Differential Revision: https://reviews.llvm.org/D44543
When we see this:
```
%a = COPY $physreg
...
SOMETHING implicit-def $physreg
...
%b = COPY $physreg
```
The two copies are not equivalent, and so we shouldn't perform any folding
on them.
When we have two instructions which use a physical register check that they
define the same virtual register(s) as well.
e.g., if we run into this case
```
%a = COPY $physreg
...
%b = COPY %a
```
we can say that the two copies are the same, and can be folded.
Differential Revision: https://reviews.llvm.org/D76890
Make these behave the same way unsafe-fp-math and co. The command line
flag should add the attribute to functions that do not already have
it, and leave existing attributes. The attribute is the actual
implementation, but the flag is useful in some testing situations.
AMDGPU has a variety of tests with denormals enabled/disabled that
would require a painful level of test duplication without a flag. This
doesn't expose setting the separate input/output modes, or add a flag
for the f32 version yet.
Tests will be included in future patch.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
SUMMARY:
SUMMARY
for a source file "test.c"
void foo() {};
llc will generate assembly code as (assembly patch)
.globl foo
.globl .foo
.csect foo[DS]
foo:
.long .foo
.long TOC[TC0]
.long 0
and symbol table as (xcoff object file)
[4] m 0x00000004 .data 1 unamex foo
[5] a4 0x0000000c 0 0 SD DS 0 0
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 LD DS 0 0
After first patch, the assembly will be as
.globl foo[DS] # -- Begin function foo
.globl .foo
.align 2
.csect foo[DS]
.long .foo
.long TOC[TC0]
.long 0
and symbol table will as
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 DS DS 0 0
Change the code for the assembly path and xcoff objectfile patch for llc.
Reviewers: Jason Liu
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D76162
Summary:
The existing helper function can only create a libcall to functions available in
RTLIB. Add a helper function that can create a libcall to a given function name
using the provided calling convention.
Reviewers: aditya_nandakumar, t.p.northover, rovka, arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76845
In some scalarize/split result methods (unary, binary, ...), flags in
SDNode were not passed down, which may lead to unexpected results in
unsafe float-point optimization. This patch fixes them. (maybe not
complete)
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76832
For some operations, the type is unimportant and only the number of
bits matters. For example I don't want to treat <4 x s8> as a legal
type, but I also don't want to decompose loads of this into smaller
pieces to get legal register types.
On AMDGPU in SelectionDAG, we legalize a number of operations (most
notably load and store) by coercing all types to vectors of i32. For
GlobalISel, I'm trying very hard to avoid doing this for every type,
but I don't think this strategy can be completely avoided. I'm trying
to avoid bitcasts for any legitimately legal type we can operate on,
since the intervening bitcasts have proven to be a hassle.
For loads, I think I can get away without ever casting the result
type, and handling any arbitrary bitwidth during selection (I will
eventually want new tablegen support to help with this, rather than
having to add every possible type as legal). The unmerge required to
do anything with the value should expand to the expected shifts. This
is trickier for stores, since it would now require handling a wide
array of truncates during selection which I don't want.
Future potentially interesting case are for vector indexing, where
sub-dword type should be indexed in s32 pieces.
Record the address of a tail-calling branch instruction within its call
site entry using DW_AT_call_pc. This allows a debugger to determine the
address to use when creating aritificial frames.
This creates an extra attribute + relocation at tail call sites, which
constitute 3-5% of all call sites in xnu/clang respectively.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76336
The current implementation collects all Preds/Succs of a Dep of kind Output, creating a long chain and subsequently a schedule with an unnecessarily large II.
Was this done on purpose for a reason I'm missing?
Reviewed By: bcahoon
Differential Revision: https://reviews.llvm.org/D75424
When we find something like this:
```
%a:_(s32) = G_SOMETHING ...
...
%select:_(s32) = G_SELECT %cond(s1), %a, %a
```
We can remove the select and just replace it entirely with `%a` because it's
always going to result in `%a`.
Same if we have
```
%select:_(s32) = G_SELECT %cond(s1), %a, %b
```
where we can deduce that `%a == %b`.
This implements the following cases:
- `%select:_(s32) = G_SELECT %cond(s1), %a, %a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %some_copy_from_a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %b` -> `%a` when `%a` and `%b`
are defined by identical instructions
This gives a few minor code size improvements on CTMark at -O3 for AArch64.
Differential Revision: https://reviews.llvm.org/D76523
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
Otherwise, the Win64 unwinder considers direct branches to such empty
trailing BBs to be a branch out of the function. It treats such a branch
as a tail call, which can only be part of an epilogue. If the unwinder
misclassifies such a branch as part of the epilogue, it will fail to
unwind the stack further. This can lead to bad stack traces, or failure
to handle exceptions properly. This is described in
https://llvm.org/PR45064#c4, and by the comment at the top of the
X86AvoidTrailingCallPass.cpp file.
It should be safe to insert int3 for such blocks. An empty trailing BB
that reaches this pass is pretty much guaranteed to be unreachable. If
a program executed such a block, it would fall off the end of the
function.
Most of the complexity in this patch comes from threading through the
"EHFuncletEntry" boolean on the MIRParser and registering the pass so we
can stop and start codegen around it. I used an MIR test because we
should teach LLVM to optimize away these branches as a follow-up.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D76531
Summary:
Add new generic MIR opcodes G_SADDSAT etc. Add support in IRTranslator
for translating the saturating add/subtract intrinsics to the new
opcodes.
Reviewers: aemerson, dsanders, paquette, arsenm
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76600
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
When decided whether to generate a post-inc load/store, look at the
other memory nodes that use the same base address and, if any proceed
the current node, then don't do the combine.
The change only seems to be affecting the Arm backend, which I was
surprised at, but it appears to fix a lot of our issues around MVE
masked load/stores having to store a temporary address after an early
post-increment on a shared base address.
Differential Revision: https://reviews.llvm.org/D75847
Extract the decision to combine into a post-inc address into a
couple of functions to make the logic more clear and re-usable.
Differential Revision: https://reviews.llvm.org/D76060
Summary:
Widening G_UNMERGE_VALUES to a type which is larger than the
original source type is the same as widening it to the same
type as the source type: in both cases, G_UNMERGE_VALUES has
to be replaced with bit arithmetic which. Although the arithmetic
itself is independent of whether the source type is smaller
or equal to the widen type, widening the source type to the
widen type should result in less artifacts being emitted,
since this is the type that the user explicitly requested.
Reviewers: arsenm, dsanders, aemerson, aditya_nandakumar
Reviewed By: arsenm, dsanders
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76494
For folding pattern `x-(fma y,z,u*v) -> (fma -y,z,(fma -u,v,x))`, if
`yz` is 1, `uv` is -1 and `x` is -0, sign of result would be changed.
Differential Revision: https://reviews.llvm.org/D76419
Technically we can permit EXTLOAD of the LHS operand but only if all the extended bits are shifted out. Until we test coverage for that case, I'm just disabling this to fix PR45265.
-fuse-init-array is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
X86SpeculativeLoadHardeningPass::tracePredStateThroughCall can call
MCContext::createTempSymbol before TargetLoweringObjectFileELF::Initialize().
We need to call TargetLoweringObjectFileELF::Initialize() ealier.
test/CodeGen/X86/speculative-load-hardening-indirect.ll
Differential Revision: https://reviews.llvm.org/D71360
Use the advanceToLowerBound operation available on CoalescingBitVector
iterators to speed up collection of variables which reside within some
set of registers.
The speedup comes from avoiding repeated top-down traversals in
IntervalMap::find. The linear scan forward from one register interval to
the next is unlikely to be as expensive as a full IntervalMap search
starting from the root.
This reduces time spent in LiveDebugValues when compiling sqlite3 by
200ms (about 0.1% - 0.2% of the total User Time).
Depends on D76466.
rdar://60046261
Differential Revision: https://reviews.llvm.org/D76467
Avoid making a heap allocation when constructing a CoalescingBitVector.
This reduces time spent in LiveDebugValues when compiling sqlite3 by
700ms (0.5% of the total User Time).
rdar://60046261
Differential Revision: https://reviews.llvm.org/D76465
UseInitArray is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
Differential Revision: https://reviews.llvm.org/D71360
Summary:
It can be the case that a vector type is legal but the corresponding
scalar type is not legal for an architecture (i8 vs. v16i8 on AArch64).
Check if the scalar type created when folding
truncate(build_vector(x,y)) -> build_vector(truncate(x),truncate(y))
is legal if we are running after the type legalizer.
This fixes https://github.com/android/ndk/issues/1207.
Reviewers: RKSimon, srhines
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76312
Summary:
For some reason the order in which we call getNegatedExpression
for the involved operands, after a call to isCheaperToUseNegatedFPOps,
seem to matter. This patch includes a new test case in
test/CodeGen/X86/fdiv.ll that crashes if we reverse the order of
those calls. Before this patch that could happen depending on
which compiler that were used when buildind llvm. With my GCC
version (7.4.0) I got the crash, because it seems like it is
using a different order for the argument evaluation compared
to clang.
All other users of isCheaperToUseNegatedFPOps already used this
pattern with unfolded/ordered calls to getNegatedExpression, so
this patch is aligning visitFDIV with the other use cases.
This patch simply deals with the non-determinism for FDIV. While
the underlying problem with getNegatedExpression is discussed
further in D76439.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76319
This reverts commit e9f22fd429.
When building with -DLLVM_USE_SANITIZER="Thread", check-llvm has 70
failing tests with this revision, and 29 without this revision.
Port over the following:
- shuffle undef, undef, any_mask -> undef
- shuffle anything, anything, undef_mask -> undef
This sort of thing shows up a lot when you try to bugpoint code containing
shufflevector.
Differential Revision: https://reviews.llvm.org/D76382
Summary:
* Remove a bunch of asserts checking for unsupported scalable types and
add some more now that they are supported.
* Propagate the scalable flag where necessary.
* Add another `EVT::getExtendedVectorVT` method that takes an
ElementCount parameter.
* Add `EVT::isExtendedScalableVector` and
`EVT::getExtendedVectorElementCount` - latter is currently unused.
Reviewers: sdesmalen, efriedma, rengolin, craig.topper, huntergr
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75672
Summary:
Related to D75672, this patch adds EVT::isFixedLengthVector to determine
if the underlying vector type is of fixed length.
An assert is introduced in EVT::getVectorNumElements that triggers for
types that aren't fixed length. This is currently guarded by a flag
added D75297 that is off by default and has been renamed to the more
generic ENABLE_STRICT_FIXED_SIZE_VECTORS.
Ideally we want to get rid of getVectorNumElements but a quick grep
shows there are >350 uses in lib/CodeGen and 75 in lib/Target/AArch64
alone. All of these probably aren't EVT::getVectorNumElements (some may
be the MVT equivalent), but there are many places to fixup and having
the assert on by default would make the SVE upstreaming effort
difficult.
Reviewers: sdesmalen, efriedma, ctetreau, huntergr, rengolin
Reviewed By: efriedma
Subscribers: mgorny, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76376
Gather/scatter don't access one memory location, they access multiple disjoint locations. So using a fixed size isn't accurate. But we don't have a way to represent the true behavior so just use UnknownSize.
Previously we "split" the memory VT and use that size for the MMO of each half. But the memory VT is scalar so splitting usually just returned the original scalar VT, but on 32-bit X86 if the scalar VT was i64 it probably returned i32?
Differential Revision: https://reviews.llvm.org/D76388
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
This patch generates TableGen descriptions for the specified register
banks which contain a list of register sizes corresponding to the
available HwModes. The appropriate size is used during codegen according
to the current HwMode. As this HwMode was not available on generation,
it is set upon construction of the RegisterBankInfo class. Targets
simply need to provide the HwMode argument to the
<target>GenRegisterBankInfo constructor.
The RISC-V RegisterBankInfo constructor has been updated accordingly
(plus an unused argument removed).
Differential Revision: https://reviews.llvm.org/D76007
This ports some combines from DAGCombiner.cpp which perform some trivial
transformations on instructions with undef operands.
Not having these can make it extremely annoying to find out where we differ
from SelectionDAG by looking at existing lit tests. Without them, we tend to
produce pretty bad code generation when we run into instructions which use
undef operands.
Also remove the nonpow2_store_narrowing testcase from arm64-fallback.ll, since
we no longer fall back on the add.
Differential Revision: https://reviews.llvm.org/D76339
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76348
Skip debug instructions before calling functions not expecting them.
In particular, LIS.getInstructionIndex(*mi) would fail if mi was a debg instr.
Differential Revision: https://reviews.llvm.org/D76129
If it is a*b-c*d, it could be also folded into fma(a, b, -c*d) or fma(-c, d, a*b).
This patch is trying to respect the uses of a*b and c*d to make the best choice.
Differential Revision: https://reviews.llvm.org/D75982
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
When compiling
```
struct S {
float w;
};
void f(long w, long b);
void g(struct S s) {
int w = s.w;
f(w, w*4);
}
```
I get Assertion failed: ((!CombinedExpr || CombinedExpr->isValid()) && "Combined debug expression is invalid").
That's because we combine two epxressions that both end in DW_OP_stack_value:
```
(lldb) p Expr->dump()
!DIExpression(DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p Param.Expr->dump()
!DIExpression(DW_OP_constu, 4, DW_OP_mul, DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p CombinedExpr->isValid()
(bool) $0 = false
(lldb) p CombinedExpr->dump()
!DIExpression(4097, 32, 5, 4097, 64, 5, 16, 4, 30, 4097, 32, 5, 4097, 64, 5, 159, 159)
```
I believe that in this particular case combining two stack values is
safe, but I didn't want to sink the special handling into
DIExpression::append() because I do want everyone to think about what
they are doing.
Patch by Adrian Prantl.
Fixes PR45181.
rdar://problem/60383095
Differential Revision: https://reviews.llvm.org/D76164
RDF is designed to be target agnostic. Therefore it would be useful to have it available for other targets, such as X86.
Based on a previous patch by Krzysztof Parzyszek
Differential Revision: https://reviews.llvm.org/D75932
I believe we were previously calculating a pointer info with the scalar base and an offset of 0. But that's not really where the gather is pointing. The offset is a function of the indices of the GEP we looked through.
Also set the size of the MachineMemOperand to UnknownSize
Differential Revision: https://reviews.llvm.org/D76157
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
Under certain circumstances we'll end up in the position where the negated shift amount will get truncated to the type specified getScalarShiftAmountTy(), so we need to test for a truncated version of the shift amount as well.
This allows us to remove half of the remaining patterns tested for by X86ISelLowering's combineOrShiftToFunnelShift.
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
With -fstack-protector-strong we check if a non-array variable has its address
taken in a way that could cause a potential out-of-bounds access. However what
we don't catch is when the address is directly used to create an out-of-bounds
memory access.
Fix this by examining the offsets of GEPs that are ultimately derived from
allocas and checking if the resulting address is out-of-bounds, and by checking
that any memory operations using such addresses are not over-large.
Fixes PR43478.
Differential revision: https://reviews.llvm.org/D75695
This is the second patch in a series of patches to enable basic block
sections support.
This patch adds support for:
* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.
Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
I used the implementation for floor instead of round. It also turns
out the OpenCL builtin library wasn't using the round builtin, but
implemented the expanded form.
Summary:
This is a part of the series of efforts for correcting alignment of memory operations.
(Another related bugs: https://bugs.llvm.org/show_bug.cgi?id=44388 , https://bugs.llvm.org/show_bug.cgi?id=44543 )
This fixes https://bugs.llvm.org/show_bug.cgi?id=43880 by giving default alignment of loads to 1.
The test CodeGen/AArch64/bcmp-inline-small.ll should have been changed; it was introduced by https://reviews.llvm.org/D64805 . I talked with @evandro, and confirmed that the test is okay to be changed.
Other two tests from PowerPC needed changes as well, but fixes were straightforward.
Reviewers: courbet
Reviewed By: courbet
Subscribers: nlopes, gchatelet, wuzish, nemanjai, kristof.beyls, hiraditya, steven.zhang, danielkiss, llvm-commits, evandro
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76113
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not frozen, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not freezed, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple patch that expands https://reviews.llvm.org/D75859 to pointer comparison and fcmp
Checked with Alive2
Reviewers: reames, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76048
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
Summary: When narrowing a scalar G_EXTRACT where the destination lines up perfectly with a single result of the emitted G_UNMERGE_VALUES a COPY should be emitted instead of unconditionally trying to emit a G_MERGE_VALUES.
Reviewers: arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75743
This is a reimplementation of the optimization removed in D75964. The actual spill/fill optimization is handled by D76013, this one just worries about reducing the stackmap section size itself by eliminating redundant entries. As noted in the comments, we could go a lot further here, but avoiding the degenerate invoke case as we did before is probably "enough" in practice.
Differential Revision: https://reviews.llvm.org/D76021
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
This is part of PR44213 https://bugs.llvm.org/show_bug.cgi?id=44213
When importing (system) Clang modules, LLDB needs to know which SDK
(e.g., MacOSX, iPhoneSimulator, ...) they came from. While the sysroot
attribute contains the absolute path to the SDK, this doesn't work
well when the debugger is run on a different machine than the
compiler, and the SDKs are installed in different directories. It thus
makes sense to just store the name of the SDK instead of the absolute
path, so it can be found relative to LLDB.
rdar://problem/51645582
Differential Revision: https://reviews.llvm.org/D75646
Summary:
The change is to fix conflict value for metadata "Objective-C Garbage Collection" in the mix of swift and Objective-C bitcode.
The purpose is to provide the support of LTO for swift and Objective-C mixed project.
Reviewers: rjmccall, ahatanak, steven_wu
Reviewed By: rjmccall, steven_wu
Subscribers: manmanren, mehdi_amini, hiraditya, dexonsmith, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71219
We just removed a broken duplicate elimination algorithm in D75964, and after landed that it occurred to me that duplicate elimination is simply CSE. SelectionDAG has a build in CSE, so why wasn't that triggering? Well, it turns out we were overly conservative in the memory states for our reloads and CSE (rightly) considers the incoming memory state for a load part of the identity of the load.
By loosening the chain and allowing reordering, we also allow CSE. As shown in the test case, doing iterative CSE as we go is enough to eliminate duplicate stores in later statepoints as well. We key our (block local) slot map by SDValue, so commoning a previous pair of loads at construction time means we also common following stores.
Differential Revision: https://reviews.llvm.org/D76013
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
Summary:
This patch helps CodeGenPrepare move freeze into the icmp when it is used by branch.
It reenables generation of efficient conditional jumps.
This is only done when at least one of icmp's operands is constant to prevent the transformation from increasing # of freeze instructions.
Performance degradation of MultiSource/Benchmarks/Ptrdist/yacr2/yacr2.test is resolved with this patch.
Checked with Alive2
Reviewers: reames, fhahn, nlopes
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75859
A downstream test case (see included reduced test) revealed that we have a bug in how we handle duplicate relocations. If we have the same SDValue relocated twice, and that value happens to be a constant (such as null), we only export one of the two llvm::Values. Exporting on a per llvm::Value basis is required to allow lowering of gc.relocates in following basic blocks (e.g. invokes). Without it, we end up with a use of an undefined vreg and bad things happen.
Rather than fixing the optimization - which appears to be hard - I propose we simply remove it. There are no tests in tree that change with this code removed. If we find out later that this did matter for something, we can reimplement a variation of this in CodeGenPrepare to catch the easy cases without complicating the lowering code.
Thanks to Denis and Serguei who did all the hard work of figuring out what went wrong here. The patch is by far the easy part. :)
Differential Revision: https://reviews.llvm.org/D75964
If the loaded memory size was smaller than the result size, this would
produce out of bounds memory accesses. I'm wondering if we need a
distinct narrow memory legalize action type, since a case I care about
is decomposing a 4-byte unaligned access into 4 extending loads, which
would leave the original result register type. I'm currently awkwardly
using narrowScalar to handle unaligned accesses that need to be split.
Summary:
This patch extends the TargetMachine to let targets specify the integer size
used by the sjljehprepare pass. This is 64bit for the VE target and otherwise
defaults to 32bit for all targets, which was hard-wired before.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71337
When hashing on MachineOperand::MO_ConstantPoolIndex, now MIR-Canon and
MIRVRegNamer will no longer result in a hash collision.
Differential Revision: https://reviews.llvm.org/D74449
This allows Spiller.h to be used and included outside of
the lib/CodeGen directory. For example to be used in the
lib/Target directory or other places.
This reverts commit 5583c2f2fb.
The lldb bot failure was a test that was fragile and sensitive to irrelevant
changes in instruction ordering. Re-committing this as the test should have
been skipped for AArch64 now.
Differential Revision: https://reviews.llvm.org/D75555
Handle LinkOnceODRLinkage;
Handle AppendingLinkage type for llvm.global_ctors/dtors static init global arrays;
Differential Revision: https://reviews.llvm.org/D75305
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
Summary:
This performs better for sample PGO.
NFC as PGSOColdCodeOnlyForSamplePGO is still true.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75550
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
As the test case shows if there is an ExtractValueInst in the Ret block, function dupRetToEnableTailCallOpts can't duplicate it into the block containing call. So later no tail call is generated in CodeGen.
This patch adds the ExtractValueInst handling code in function dupRetToEnableTailCallOpts and FoldReturnIntoUncondBranch, and later tail call can be generated for this case.
Differential Revision: https://reviews.llvm.org/D74242
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
This changes the localizer to attempt intra-block localizer of instructions
that have local uses. This is useful because sometimes the entry block itself
has many uses of constant-like instructions, which would benefit from shortening
live ranges. Previously if an inst had no non-local uses, we wouldn't add it to
the list of instructions to attempt further intra-block localization.
This gives a 0.7% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D75555
Summary:
This change checks for the return type in the frontend and adds a flag
to the DISubroutineType to indicate that the option should be added in
CodeViewDebug.
Previously function types sometimes appeared twice in the PDB: once with
"returns cxx udt" and once without.
See https://bugs.llvm.org/show_bug.cgi?id=44785.
Reviewers: rnk, asmith
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75215
This fixes a miscompile that happened because a DBG_VALUE interfered
with the MachineOutliner's liveness analysis.
Inserting a DBG_VALUE after a terminator breaks predicates on MBB such
as isReturnBlock(). And the resulting DBG_VALUE cannot be "live".
I plan to introduce a MachineVerifier check for this situation in a
follow up.
rdar://59859175
Testing: check-llvm, LNT build with a stage2 compiler & entry values
enabled
Differential Revision: https://reviews.llvm.org/D75548
```
// clang -c -gdwarf-5 a.s -o a.o
.section .init; ret
.text; ret
```
.debug_info contains DW_AT_ranges and llvm-dwarfdump will report
a verification error because .debug_rnglists does not exist (not
implemented).
This patch generates .debug_rnglists for assembly files.
emitListsTableHeaderStart() in DwarfDebug.cpp can be shared with
MCDwarf.cpp. Because CodeGen depends on MC, I move the function to
MCDwarf.cpp
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D75375
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
In RDA, check against the already decided dead instructions when
looking at users. This allows an instruction to be removed if it
has multiple users, but they're all dead.
This means that IT instructions can be considered killed once all
the itstate using instructions are dead.
Differential Revision: https://reviews.llvm.org/D75245
This patch adds support for dwarf emission/dumping part of debuginfo
generation for defaulted parameters.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
Make it a compile-time error to pass an int/unsigned/etc to
fromRawInteger.
Hopefully this prevents errors of the form:
```
for (unsigned ID : getVarLocs()) {
auto VL = LocMap[LocIndex::fromRawInteger(ID)];
...
```
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
This is needed for D74873, AMDGPU going to have 16 bit subregs
and the largest tuple is 32 VGPRs, which results in 64 lanes.
Differential Revision: https://reviews.llvm.org/D75378
We should be careful to allow count of re-materialization of operands to be less
then number of physical registers.
STATEPOINT instruction has a variable number of operands and potentially very big.
So re-materialization for all operands is disabled at the moment if restrict-statepoint-remat is true.
The patch relaxes the re-materialization restriction for STATEPOINT instruction allowing it for
fixed operands. Specifically it is about call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits, qcolombet, hiraditya
Differential Revision: https://reviews.llvm.org/D75335
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
Try again with an up-to-date version of D69471 (99317124 was a stale
revision).
---
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
As a narrow stopgap for the assertion failure described in PR45025, add
a describeLoadedValue override to ARMBaseInstrInfo and use it to detect
copies in which the forwarding reg is a super/sub reg of the copy
destination. For the moment this is unsupported.
Several follow ups are possible:
1) Handle VORRq. At the moment, we do not, because isCopyInstrImpl
returns early when !MI.isMoveReg().
2) In the case where forwarding reg is a super-reg of the copy
destination, we should be able to describe the forwarding reg as a
subreg within the copy destination. I'm not 100% sure about this, but
it looks like that's what's done in AArch64InstrInfo.
3) In the case where the forwarding reg is a sub-reg of the copy
destination, maybe we could describe the forwarding reg using the
copy destinaion and a DW_OP_LLVM_fragment (I guess this should be
possible after D75036).
https://bugs.llvm.org/show_bug.cgi?id=45025
rdar://59772698
Differential Revision: https://reviews.llvm.org/D75273
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
Way back in D24994, the combination of LexicalScopes::dominates and
LiveDebugValues was identified as having worst-case quadratic complexity,
but it wasn't triggered by any code path at the time. I've since run into a
scenario where this occurs, in a very large basic block where large numbers
of inlined DBG_VALUEs are present.
The quadratic-ness comes from LiveDebugValues::join calling "dominates" on
every variable location, and LexicalScopes::dominates potentially touching
every instruction in a block to test for the presence of a scope. We have,
however, already computed the presence of scopes in blocks, in the
"InstrRanges" of each scope. This patch switches the dominates method to
examine whether a block is present in a scope's InsnRanges, avoiding
walking through the whole block.
At the same time, fix getMachineBasicBlocks to account for the fact that
InsnRanges can cover multiple blocks, and add some unit tests, as Lexical
Scopes didn't have any.
Differential revision: https://reviews.llvm.org/D73725
Ensure that we're recording implicit defs, as well as visiting implicit
uses and implicit defs when we're walking through operands.
Differential Revision: https://reviews.llvm.org/D75185
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
This is part 3 of a 3-part series to address a compile-time explosion
issue in LiveDebugValues.
---
Start encoding register locations within VarLoc IDs, and take advantage
of this encoding to speed up transferRegisterDef.
There is no fundamental algorithmic change: this patch simply swaps out
SparseBitVector in favor of CoalescingBitVector. That changes iteration
order (hence the test updates), but otherwise this patch is NFCI.
The only interesting change is in transferRegisterDef. Instead of doing:
```
KillSet = {}
for (ID : OpenRanges.getVarLocs())
if (DeadRegs.count(ID))
KillSet.add(ID)
```
We now do:
```
KillSet = {}
for (Reg : DeadRegs)
for (ID : intervalsReservedForReg(Reg, OpenRanges.getVarLocs()))
KillSet.add(ID)
```
By not visiting each open location every time we visit an instruction,
this eliminates some potentially quadratic behavior. The new
implementation basically does a constant amount of work per instruction
because the interval map lookups are very fast.
For a file in WebKit, this brings the time spent in LiveDebugValues down
from ~2.5 minutes to 4 seconds, reducing compile time spent in that pass
from 28% of the total to just over 1%.
Before:
```
2.49 min 27.8% 0 s LiveDebugValues::process
2.41 min 27.0% 5.40 s LiveDebugValues::transferRegisterDef
1.51 min 16.9% 1.51 min LiveDebugValues::VarLoc::isDescribedByReg() const
32.73 s 6.1% 8.70 s llvm::SparseBitVector<128u>::SparseBitVectorIterator::operator++()
```
After:
```
4.53 s 1.1% 0 s LiveDebugValues::process
3.00 s 0.7% 107.00 ms LiveDebugValues::transferRegisterCopy
892.00 ms 0.2% 406.00 ms LiveDebugValues::transferSpillOrRestoreInst
404.00 ms 0.1% 32.00 ms LiveDebugValues::transferRegisterDef
110.00 ms 0.0% 2.00 ms LiveDebugValues::getUsedRegs
57.00 ms 0.0% 1.00 ms std::__1::vector<>::push_back
40.00 ms 0.0% 1.00 ms llvm::CoalescingBitVector<>::find(unsigned long long)
```
FWIW, I tried the same approach using SparseBitVector, but got bad
results. To do that, I had to extend SparseBitVector to support 64-bit
indices and expose its lower bound operation. The problem with this is
that the performance is very hard to predict: SparseBitVector's lower
bound operation falls back to O(n) linear scans in a std::list if you're
not /very/ careful about managing iteration order. When I profiled this
the performance looked worse than the baseline.
You can see the full CoalescingBitVector-based implementation here:
https://github.com/vedantk/llvm-project/commits/try-coalescing
You can see the full SparseBitVector-based implementation here:
https://github.com/vedantk/llvm-project/commits/try-sparsebitvec-find
Depends on D74984 and D74985.
Differential Revision: https://reviews.llvm.org/D74986
This is part 2 of a 3-part series to address a compile-time explosion
issue in LiveDebugValues.
---
Each VarLoc has a unique ID: this ID is used to look up a VarLoc in the
VarLocMap, and to virtually insert a VarLoc into a VarLocSet. Instead of
inserting the VarLoc /itself/ into the VarLocSet, we insert just the ID,
because this can be represented efficiently with a SparseBitVector.
This change introduces LocIndex, a layer of abstraction on top of VarLoc
IDs. Prior to this change, an ID was just an index into a vector. With
this change, an ID encodes both an index /and/ a register location. The
type-checker ensures that conversions to and from LocIndex are correct.
For the moment the register location is always 0 (undef). We have plenty
of bits left over to encode physregs, stack slots, and other locations
in the future.
Differential Revision: https://reviews.llvm.org/D74985
The code changes here are hopefully straightforward:
1. Use MachineInstruction flags to decide if FP ops can be reassociated
(use both "reassoc" and "nsz" to be consistent with IR transforms;
we probably don't need "nsz", but that's a safer interpretation of
the FMF).
2. Check that both nodes allow reassociation to change instructions.
This is a stronger requirement than we've usually implemented in
IR/DAG, but this is needed to solve the motivating bug (see below),
and it seems unlikely to impede optimization at this late stage.
3. Intersect/propagate MachineIR flags to enable further reassociation
in MachineCombiner.
We managed to make MachineCombiner flexible enough that no changes are
needed to that pass itself. So this patch should only affect x86
(assuming no other targets have implemented the hooks using MachineIR
flags yet).
The motivating example in PR43609 is another case of fast-math transforms
interacting badly with special FP ops created during lowering:
https://bugs.llvm.org/show_bug.cgi?id=43609
The special fadd ops used for converting int to FP assume that they will
not be altered, so those are created without FMF.
However, the MachineCombiner pass was being enabled for FP ops using the
global/function-level TargetOption for "UnsafeFPMath". We managed to run
instruction/node-level FMF all the way down to MachineIR sometime in the
last 1-2 years though, so we can do better now.
The test diffs require some explanation:
1. llvm/test/CodeGen/X86/fmf-flags.ll - no target option for unsafe math was
specified here, so MachineCombiner kicks in where it did not previously;
to make it behave consistently, we need to specify a CPU schedule model,
so use the default model, and there are no code diffs.
2. llvm/test/CodeGen/X86/machine-combiner.ll - replace the target option for
unsafe math with the equivalent IR-level flags, and there are no code diffs;
we can't remove the NaN/nsz options because those are still used to drive
x86 fmin/fmax codegen (special SDAG opcodes).
3. llvm/test/CodeGen/X86/pow.ll - similar to #1
4. llvm/test/CodeGen/X86/sqrt-fastmath.ll - similar to #1, but MachineCombiner
does some reassociation of the estimate sequence ops; presumably these are
perf wins based on latency/throughput (and we get some reduction of move
instructions too); I'm not sure how it affects numerical accuracy, but the
test reflects reality better now because we would expect MachineCombiner to
be enabled if the IR was generated via something like "-ffast-math" with clang.
5. llvm/test/CodeGen/X86/vec_int_to_fp.ll - this is the test added to model PR43609;
the fadds are not reassociated now, so we should get the expected results.
6. llvm/test/CodeGen/X86/vector-reduce-fadd-fast.ll - similar to #1
7. llvm/test/CodeGen/X86/vector-reduce-fmul-fast.ll - similar to #1
Differential Revision: https://reviews.llvm.org/D74851
This will address the issue: P8198 and P8199 (from D73534).
The methods was not handle bundles properly.
Differential Revision: https://reviews.llvm.org/D74904
Summary:
If the describeLoadedValue() hook produced a DIExpression when
describing a instruction, and it was not possible to emit a call site
entry directly (the value operand was not an immediate nor a preserved
register), then that described value could not be inserted into the
worklist, and would instead be dropped, meaning that the parameter's
call site value couldn't be described.
This patch extends the worklist so that each entry has an DIExpression
that is built up when iterating through the instructions.
This allows us to describe instruction chains like this:
$reg0 = mv $fp
$reg0 = add $reg0, offset
call @call_with_offseted_fp
Since DW_OP_LLVM_entry_value operations can't be combined with any other
expression, such call site entries will not be emitted. I have added a
test, dbgcall-site-expr-entry-value.mir, which verifies that we don't
assert or emit broken DWARF in such cases.
Reviewers: djtodoro, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75036
Summary:
This is a preparatory patch for D75036, in which a debug expression is
associated with each parameter register in the worklist. In that patch
the two lambda functions addToWorklist() and finishCallSiteParams() grow
a bit, so move those out to separate functions. This patch also prepares
for each parameter register having their own expression moving the
creation of the DbgValueLoc into finishCallSiteParams().
Reviewers: djtodoro, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75050
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
Add getUniqueReachingMIDef to RDA which performs a global search for
a machine instruction that produces a unique definition of a given
register at a given point. Also add two helper functions
(getMIOperand) that wrap around this functionality to get the
incoming definition uses of a given instruction. These now replace
the uses of getReachingMIDef in ARMLowOverheadLoops. getReachingMIDef
has been renamed to getReachingLocalMIDef and has been made private
along with getInstFromId.
Differential Revision: https://reviews.llvm.org/D74605
Only MCAsmStreamer (assembly output) needs to keep names of temporary labels created by
MCContext::createTempSymbol().
This change made the rL236642 optimization available for cc2as and
probably some other users.
This eliminates a behavior difference between llvm-mc -filetype=obj and cc1as, which caused
https://reviews.llvm.org/D74006#1890487
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75097
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Unlike what I claimed in my previous commit. The caching is
actually not NFC on PHIs.
When we put a big enough max depth, we end up simulating loops.
The cache is effectively cutting the simulation short and we
get less information as a result.
E.g.,
```
v0 = G_CONSTANT i8 0xC0
jump
v1 = G_PHI i8 v0, v2
v2 = G_LSHR i8 v1, 1
```
Let say we want the known bits of v1.
- With cache:
Set v1 cache to we know nothing
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is in the cache
=> v1 is 0, thus v2 is 0x80
Finally v1 is v0 & v2 => 0x80
- Without cache and enough depth to do two iteration of the loop:
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is v0 & v2
v0 is 0xC0
v2 is v1 >> 1
Reach the max depth for v1...
unwinding
v1 is know nothing
v2 is 0x80
v0 is 0xC0
v1 is 0x80
v2 is 0xC0
v0 is 0xC0
v1 is 0xC0
Thus now v1 is 0xC0 instead of 0x80.
I've added a unittest demonstrating that.
NFC
Add a dump method that recursively prints an instruction and all
the instructions defining its operands and so on.
This is helpful when looking at combiner issue.
NFC
Differential Revision: https://reviews.llvm.org/D75094
MachineVerifier still takes 45-50% of total compile time with
-verify-machineinstrs, with calcRegsPassed dataflow taking ~50-60% of
MachineVerifier.
The majority of that time is spent in BBInfo::addPassed, mostly within
DenseSet implementing the sets the dataflow is operating over.
In particular, 1/4 of that DenseSet time is spent just iterating over it
(operator++), 40-50% on insertions, and most of the rest in ::count.
Given that, we're implementing custom sets just for this analysis here,
focusing on cheap insertions and O(n) iteration time (as opposed to
O(U), where U is the universe).
As it's based _mostly_ on BitVector for sparse and SmallVector for
dense, it may remotely resemble SparseSet. The difference is, our
solution is a lot less clever, doesn't have constant time `clear` that
we won't use anyway as reusing these sets across analyses is cumbersome,
and thus more space efficient and safer (got a resizable Universe and a
fallback to DenseSet for sparse if it gets too big).
With this patch MachineVerifier gets ~15-20% faster, its contribution to
total compile time drops from 45-50% to ~35%, while contribution of
calcRegsPassed to MachineVerifier drops from 50-60% to ~35% as well.
calcRegsPassed itself gets another 2x faster here.
All measured on a large suite of shaders targeting a number of GPUs.
Reviewers: bogner, stoklund, rudkx, qcolombet
Reviewed By: rudkx
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75033
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
Changes the handling of odd breakdowns, and avoids using
G_EXTRACT/G_INSERT. Pad with undef to a wider size, and unmerge. Also
avoid introducing instructions for the fully undef components.
Depending on the target, test suite, pipeline config and perhaps other
factors machine verifier when forced on with -verify-machineinstrs can
increase compile time 2-2.5 times over (Release, Asserts On), taking up
~60% of the time. An invaluable tool, it significantly slows down
machine verifier-enabled testing.
Nearly 75% of its time MachineVerifier spends in the calcRegsPassed
method. It's a classic forward dataflow analysis executed over sets, but
visiting MBBs in arbitrary order. We switch that to RPO here.
This speeds up MachineVerifier by about 35%, decreasing the overall
compile time with -verify-machineinstrs by 20-25% or so.
calcRegsPassed itself gets 2x faster here.
All measured on a large suite of shaders targeting a number of GPUs.
Reviewers: bogner, stoklund, rudkx, qcolombet
Reviewed By: bogner
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75032
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
Change the way that we remove the redundant iteration count code in
the presence of IT blocks. collectLocalKilledOperands has been
introduced to scan an instructions operands, collecting the killed
instructions and then visiting them too. This is used to delete the
code in the preheader which calculates the iteration count. We also
track any IT blocks within the preheader and, if we remove all the
instructions from the IT block, we also remove the IT instruction.
isSafeToRemove is used to remove any redundant uses of the iteration
count within the loop body.
Differential Revision: https://reviews.llvm.org/D74975
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
Summary:
The type used to represent functional units in MC is
'unsigned', which is 32 bits wide. This is currently
not a problem in any upstream target as no one seems
to have hit the limit on this yet, but in our
downstream one, we need to define more than 32
functional units.
Increasing the size does not seem to cause a huge
size increase in the binary (an llc debug build went
from 1366497672 to 1366523984, a difference of 26k),
so perhaps it would be acceptable to have this patch
applied upstream as well.
Subscribers: hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71210
This version fixes a buildbot failure cause by picking the wrong insert
point for XORs. We cannot pick the XOR binary operator as insert point,
as it is not guaranteed that both input operands for the overflow
intrinsic are defined before it.
This reverts the revert commit
c7fc0e5da6.
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
This patch adds a cache that is valid only for the duration of a call
to getKnownBits. With such short lived cache we avoid all the problems
of cache invalidation while still getting the benefits of reusing
the information we already computed.
This cache is useful whenever an instruction occurs more than once
in a chain of computation.
E.g.,
v0 = G_ADD v1, v2
v3 = G_ADD v0, v1
Previously we would compute the known bits for:
v1, v2, v0, then v1 again and finally v3.
With the patch, now we won't have to recompute v1 again.
NFC
Summary:
This prevents BFI queries on new blocks (from
MachineSinking::GetAllSortedSuccessors) and fixes a bunch of assert failures
under -check-bfi-unknown-block-queries=true.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74511
This changes the SimplifyLibCalls utility to accept an IRBuilderBase,
which allows us to pass through the IRBuilder used by InstCombine.
This will ensure that new instructions get added to the worklist.
The annotated test-case drops from 4 to 2 InstCombine iterations thanks
to this.
To achieve this, I'm adding an IRBuilderBase::OperandBundlesGuard,
which is basically the same as the existing InsertPointGuard and
FastMathFlagsGuard, but for operand bundles. Also add a
setDefaultOperandBundles() method so these can be set outside the
constructor.
Differential Revision: https://reviews.llvm.org/D74792
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
I believe this was carried over from getELFKindForNamedSection since
the wasm backend originally used ELF object writing as a template.
Differential Revision: https://reviews.llvm.org/D74565
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
When analyzing PHIs, we gather the known bits for every operand and
merge them together to get the known bits of the result of the PHI.
It is not unusual that merging the information leads to know nothing
on the result (e.g., phi a: i8 3, b: i8 unknown, ..., after looking at the
second argument we know we will know nothing on the result), thus, as
soon as we reach that state, stop analyzing the following operand (i.e.,
on the previous example, we won't process anything after looking at `b`).
This improves compile time in particular with PHIs with a large number
of operands.
NFC.
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
Summary:
If the programmer adds static profile data to a branch---i.e. uses
"__builtin_expect()" or similar---then we should honor it. Otherwise,
"__builtin_expect()" is ignored in crucial situations. So we trust that
the programmer knows what they're doing until proven wrong.
Subscribers: hiraditya, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74809
Instcombine folds (a + b <u a) to (a ^ -1 <u b) and that does not match
the expected pattern in CodeGenPerpare via UAddWithOverflow.
This causes a regression over Clang 7 on both X86 and AArch64:
https://gcc.godbolt.org/z/juhXYV
This patch extends UAddWithOverflow to also catch the XOR case, if the
XOR is only used in the ICMP. This covers just a single case, but I'd
like to make sure I am not missing anything before tackling the other
cases.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: nikic, lebedev.ri
Differential Revision: https://reviews.llvm.org/D74228
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
https://reviews.llvm.org/D67133
While investigating some non determinism (CSE doesn't produce wrong
code, it just doesn't CSE some times) in GISel CSE on an out of tree
target, I realized that the core issue was that there were lots of code
that mutates (setReg, setRegClass etc), but doesn't notify observers
(CSE in this case but this could be any other observer). In order to
make the Observer be available in various parts of code and to avoid
having to thread it through various API, the MachineFunction now has the
observer as field. This allows it to be easily used in helper functions
such as constrainOperandRegClass.
Also added some invariant verification method in CSEInfo which can
catch these issues (when CSE is enabled).
Summary:
Unlike normal calls, call_indirects have immediate arguments that
caused a MachineVerifier failure without a small tweak to loosen the
verifier's requirements for variadicOpsAreDefs instructions.
One nice thing about the new call_indirects is that they do not need
to participate in the PCALL_INDIRECT mechanism because their post-isel
hook handles moving the function pointer argument and adding the flags
and typeindex arguments itself.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74191
This reverts commit 649aba93a2, now that
the approach started there has been shown to be workable in the patch
series culminating in https://reviews.llvm.org/D74192.
Summary:
Making `Scale` a `TypeSize` in AArch64InstrInfo::getMemOpInfo,
has the effect that all places where this information is used
(notably, TargetInstrInfo::getMemOperandWithOffset) will need
to consider Scale - and derived, Offset - possibly being scalable.
This patch adds a new operand `bool &OffsetIsScalable` to
TargetInstrInfo::getMemOperandWithOffset and fixes up all
the places where this function is used, to consider the
offset possibly being scalable.
In most cases, this means bailing out because the algorithm does not
(or cannot) support scalable offsets in places where it does some
form of alias checking for example.
Reviewers: rovka, efriedma, kristof.beyls
Reviewed By: efriedma
Subscribers: wuzish, kerbowa, MatzeB, arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, javed.absar, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72758
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
For a file in WebKit, this brings the time spent in LiveDebugValues down
from 16 minutes to 2 minutes. The reduction comes from iterating the set
of open variable locations just once in transferRegisterDef. Post-patch,
the most expensive item inside of transferRegisterDef is a call to
VarLoc::isDescribedByReg, which we have to do.
Testing: I built LNT using the Os-g cmake cache with & without this
patch, then diffed the object files to verify there was no binary diff.
rdar://59446577
Differential Revision: https://reviews.llvm.org/D74633
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Produce an unmerge to a narrower type and introduce a narrower shift
if needed. I wasn't sure if there was a better way to parameterize the
target's preferred shift type for the GICombineRule, so manually call
the combine helper.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
Summary:
When using strict fp, it is required to update the
chain when performing integer type promotion of a
operand to a integer to floating point conversion.
Reviewers: craig.topper, john.brawn
Reviewed By: craig.topper
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74597
Follow-up for D74006.
When the integrated assembler is used, we use SHF_LINK_ORDER. The
linked-to symbol is part of ELFSectionKey, thus we can omit the unique
ID.
In https://reviews.llvm.org/rG8b737688c21a9755cae14cb9343930e0882164ab I
switched the condition gating the creation of the descriptor symbol from
checking the MCAsmInfo if we need to support descriptors, to if the OS
was AIX. Technically the 2 should be interchangeable: if we are
targeting AIX then we need to emit XCOFF object files, and the MCAsmInfo
must return true for needing function descriptors.
This doesn't account for lit test with runsteps that only set the arch.
Eg: test/CodeGen/XCore/section-name.ll
which when run natively on AIX we end up with a target xcore-ibm-aix and
needFunctionDescriptors is false.
This patch reverts to using the MCAsmInfo and adds an assert that the
target OS must be AIX since that is the only target using the descriptor
hook.
Differential Revision: https://reviews.llvm.org/D74622
This is more or less directly ported from the AMDGPU custom lowering
for FP_TO_FP16. I made a few minor fixups (using G_UNMERGE_VALUES
instead of creating shift/trunc to extract the two halves, and zexting
an inverted compare instead of select_cc).
This also does not include the fast math expansion the DAG which
converts to f32 and then to f16. I think that belongs in a
pre-legalize combine instead.
Like COPY instructions explained in D70616, we don't check the constraints
when combining G_UNMERGE_VALUES. Use the same logic used in D70616 to check
if registers can be replaced, or a COPY instruction needs to be built.
https://reviews.llvm.org/D70564
The goal of this patch is to maximize CPU utilization on multi-socket or high core count systems, so that parallel computations such as LLD/ThinLTO can use all hardware threads in the system. Before this patch, on Windows, a maximum of 64 hardware threads could be used at most, in some cases dispatched only on one CPU socket.
== Background ==
Windows doesn't have a flat cpu_set_t like Linux. Instead, it projects hardware CPUs (or NUMA nodes) to applications through a concept of "processor groups". A "processor" is the smallest unit of execution on a CPU, that is, an hyper-thread if SMT is active; a core otherwise. There's a limit of 32-bit processors on older 32-bit versions of Windows, which later was raised to 64-processors with 64-bit versions of Windows. This limit comes from the affinity mask, which historically is represented by the sizeof(void*). Consequently, the concept of "processor groups" was introduced for dealing with systems with more than 64 hyper-threads.
By default, the Windows OS assigns only one "processor group" to each starting application, in a round-robin manner. If the application wants to use more processors, it needs to programmatically enable it, by assigning threads to other "processor groups". This also means that affinity cannot cross "processor group" boundaries; one can only specify a "preferred" group on start-up, but the application is free to allocate more groups if it wants to.
This creates a peculiar situation, where newer CPUs like the AMD EPYC 7702P (64-cores, 128-hyperthreads) are projected by the OS as two (2) "processor groups". This means that by default, an application can only use half of the cores. This situation could only get worse in the years to come, as dies with more cores will appear on the market.
== The problem ==
The heavyweight_hardware_concurrency() API was introduced so that only *one hardware thread per core* was used. Once that API returns, that original intention is lost, only the number of threads is retained. Consider a situation, on Windows, where the system has 2 CPU sockets, 18 cores each, each core having 2 hyper-threads, for a total of 72 hyper-threads. Both heavyweight_hardware_concurrency() and hardware_concurrency() currently return 36, because on Windows they are simply wrappers over std:🧵:hardware_concurrency() -- which can only return processors from the current "processor group".
== The changes in this patch ==
To solve this situation, we capture (and retain) the initial intention until the point of usage, through a new ThreadPoolStrategy class. The number of threads to use is deferred as late as possible, until the moment where the std::threads are created (ThreadPool in the case of ThinLTO).
When using hardware_concurrency(), setting ThreadCount to 0 now means to use all the possible hardware CPU (SMT) threads. Providing a ThreadCount above to the maximum number of threads will have no effect, the maximum will be used instead.
The heavyweight_hardware_concurrency() is similar to hardware_concurrency(), except that only one thread per hardware *core* will be used.
When LLVM_ENABLE_THREADS is OFF, the threading APIs will always return 1, to ensure any caller loops will be exercised at least once.
Differential Revision: https://reviews.llvm.org/D71775
Craig Topper