Summary:
ConstantExprs involving operations on <1 x Ty> could translate into MIR
that failed to verify with:
*** Bad machine code: Reading virtual register without a def ***
The problem was that translate(const Constant &C, Register Reg) had
recursive calls that passed the same Reg in for the translation of a
subexpression, but without updating VMap for the subexpression first as
translate(const Constant &C, Register Reg) expects.
Fix this by using the same translateCopy helper function that we use for
translating Instructions. In some cases this causes extra G_COPY
MIR instructions to be generated.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45576
Reviewers: arsenm, volkan, t.p.northover, aditya_nandakumar
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78378
I have fixed up some places in SelectionDAG::getNode() where we
used to assert that the number of vector elements for two types
are the same. I have changed such cases to assert that the
element counts are the same instead. I've added new tests that
exercise the code paths for all the truncations. All the extend
operations are covered by this existing test:
CodeGen/AArch64/sve-sext-zext.ll
For the ISD::SETCC case I fixed this code path is exercised by
these existing tests:
CodeGen/AArch64/sve-fcmp.ll
CodeGen/AArch64/sve-intrinsics-int-compares-with-imm.ll
Differential Revision: https://reviews.llvm.org/D79399
allocas in LLVM IR have a specified alignment. When that alignment is
specified, the alloca has at least that alignment at runtime.
If the specified type of the alloca has a higher preferred alignment,
SelectionDAG currently ignores that specified alignment, and increases
the alignment. It does this even if it would trigger stack realignment.
I don't think this makes sense, so this patch changes that.
I was looking into this for SVE in particular: for SVE, overaligning
vscale'ed types is extra expensive because it requires realigning the
stack multiple times, or using dynamic allocation. (This currently isn't
implemented.)
I updated the expected assembly for a couple tests; in particular, for
arg-copy-elide.ll, the optimization in question does not increase the
alignment the way SelectionDAG normally would. For the rest, I just
increased the specified alignment on the allocas to match what
SelectionDAG was inferring.
Differential Revision: https://reviews.llvm.org/D79532
It is bad practice to capture by default (via [&] in this case) when
using lambdas, so we should avoid that as much as possible.
This patch fixes that in the getForwardingRegsDefinedByMI
from DwarfDebug module.
Differential Revision: https://reviews.llvm.org/D79616
We should use explicit type instead of auto type deduction when
the type is so obvious. In addition, we remove ambiguity, since auto
type deduction sometimes is not that intuitive, so that could lead
us to some unwanted behavior.
This patch fixes that in the collectCallSiteParameters() from
DwarfDebug module.
Differential Revision: https://reviews.llvm.org/D79624
We have the getNegatibleCost/getNegatedExpression to evaluate the cost and negate the expression.
However, during negating the expression, the cost might change as we are changing the DAG,
and then, hit the assertion if we negated the wrong expression as the cost is not trustful anymore.
This patch is target to remove the getNegatibleCost to avoid the out of sync with getNegatedExpression,
and check the cost during negating the expression. It also reduce the duplicated code between
getNegatibleCost and getNegatedExpression. And fix the crash for the test in D76638
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D77319
I don't have any test cases since X86 doesn't return any tied
operands from getUndefRegClearance today. But conceivably we could
want BreakFalseDeps to insert a dependency breaking XOR for
a tied operand in the future.
Currently this code exists in widenScalar for G_MERGE_VALUE
sources. I'm not sure if the existing expansion in widenScalar should
be removed or not. The widenScalar variant tries to extend to the
requested size, but this just uses the original bitwidth.
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
This fixes a verifier failure on a bot:
http://green.lab.llvm.org/green/job/test-suite-verify-machineinstrs-aarch64-O0-g/
```
*** Bad machine code: MBB has duplicate entries in its successor list. ***
- function: foo
- basic block: %bb.5 indirectgoto (0x7fe3d687ca08)
```
One of the GCC torture suite tests (pr70460.c) has an indirectbr instruction
which has duplicate blocks in its destination list.
According to the langref this is allowed:
> Blocks are allowed to occur multiple times in the destination list, though
> this isn’t particularly useful.
(https://www.llvm.org/docs/LangRef.html#indirectbr-instruction)
We don't allow this in MIR. So, when we translate such an instruction, the
verifier screams.
This patch makes `translateIndirectBr` check if a successor has already been
added to a block. If the successor is present, it is skipped rather than added
twice.
Differential Revision: https://reviews.llvm.org/D79609
them in a special text section.
For sampleFDO, because the optimized build uses profile generated from
previous release, previously we couldn't tell a function without profile
was truely cold or just newly created so we had to treat them conservatively
and put them in .text section instead of .text.unlikely. The result was when
we persuing the best performance by locking .text.hot and .text in memory,
we wasted a lot of memory to keep cold functions inside.
In https://reviews.llvm.org/D66374, we introduced profile symbol list to
discriminate functions being cold versus functions being newly added.
This mechanism works quite well for regular use cases in AutoFDO. However,
in some case, we can only have a partial profile when optimizing a target.
The partial profile may be an aggregated profile collected from many targets.
The profile symbol list method used for regular sampleFDO profile is not
applicable to partial profile use case because it may be too large and
introduce many false positives.
To solve the problem for partial profile use case, we provide an option called
--profile-unknown-in-special-section. For functions without profile, we will
still treat them conservatively in compiler optimizations -- for example,
treat them as warm instead of cold in inliner. When we use profile info to
add section prefix for functions, we will discriminate functions known to be
not cold versus functions without profile (being unknown), and we will put
functions being unknown in a special text section called .text.unknown.
Runtime system will have the flexibility to decide where to put the special
section in order to achieve a balance between performance and memory saving.
Differential Revision: https://reviews.llvm.org/D62540
If the SimplifyMultipleUseDemandedBits calls BITCASTs that peek through back to the original type then we can remove the BITCASTs entirely.
Differential Revision: https://reviews.llvm.org/D79572
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
CorrectExtraCFGEdges function.
The latter was a workaround for "Various pieces of code" leaving bogus
extra CFG edges in place. Where by "various" it meant only
IfConverter::MergeBlocks, which failed to clear all of the successors
of dead blocks it emptied out. This wouldn't matter a whole lot,
except that the dead blocks remained listed as predecessors of
still-useful blocks, inhibiting optimizations.
This fix slightly changed two thumb tests, because the correct CFG
successors allowed for the "diamond" if-conversion pattern to be
detected, when it could only use "simple" before.
Additionally, the removal of a now-redundant call to analyzeBranch
(with AllowModify=true) in BranchFolder::OptimizeFunction caused a
later check for an empty block in BranchFolder::OptimizeBlock to
fail. Correct this by moving the call to analyzeBranch in
OptimizeBlock higher.
Differential Revision: https://reviews.llvm.org/D79527
Summary:
This helps detect some missed BFI updates during CodeGenPrepare.
This is debug build only and disabled behind a flag.
Fix a missed update in CodeGenPrepare::dupRetToEnableTailCallOpts().
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77417
When peeling out the epilogue we need to ignore illegal phis coming from stages
greater than the producer stage. Otherwise we end up with circular phi
dependencies.
Differential Revision: https://reviews.llvm.org/D79581
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
Calling getShiftAmountTy with LegalTypes set may return a type that's too narrow to hold the shift amount for integer type it's applied to.
Fixes the regression introduced by D79096
Differential Revision: https://reviews.llvm.org/D79405
Try to combine N short vector cast ops into 1 wide vector cast op:
concat (cast X), (cast Y)... -> cast (concat X, Y...)
This is part of solving PR45794:
https://bugs.llvm.org/show_bug.cgi?id=45794
As noted in the code comment, this is uglier than I was hoping because
the opcode determines whether we pass the source or destination type
to isOperationLegalOrCustom(). Also IIUC, there's no way to validate
what the other (dest or src) type is. Without the extra legality check
on that, there's an ARM regression test in:
test/CodeGen/ARM/isel-v8i32-crash.ll
...that will crash trying to lower an unsupported v8f32 to v8i16.
Differential Revision: https://reviews.llvm.org/D79360
This patch adds ORE for MachinePipeliner, so that people can anaylyze
their code using opt-viewer or other tools, then optimize the code to
catch more piplining opportunities.
Reviewed By: bcahoon
Differential Revision: https://reviews.llvm.org/D79368
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
Summary:
I have fixed several places in getSplatSourceVector and isSplatValue
to work correctly with scalable vectors. I added new support for
the ISD::SPLAT_VECTOR DAG node as one of the obvious cases we can
support with scalable vectors. In other places I have tried to do
the sensible thing, such as bail out for vector types we don't yet
support or don't intend to support.
It's not possible to add IR test cases to cover these changes, since
they are currently only ever exercised on certain targets, e.g.
only X86 targets use the result of getSplatSourceVector. I've
assumed that X86 tests already exist to test these code paths for
fixed vectors. However, I have added some AArch64 unit tests that
test the specific functions I have changed.
Differential revision: https://reviews.llvm.org/D79083
Register live ranges may have had gaps that after coalescing should be
removed. This is done by adding a new segment to the range, and merging
it with neighboring segments. When doing so, do not assume that each
subrange of the register ended at the same index. If a subrange ended
earlier, adding this segment could make the live range invalid.
Instead, if the subrange is not live at the start of the segment,
extend it first.
Today symbol names generated for machine basic block sections use a
unary encoding to reduce bloat. This is essential when every basic block
in the binary is assigned a symbol however with basic block clusters
(rG05192e585ce175b55f2a26b83b4ed7882785c8e6) when we only need to
generate a few non-temporary symbols we can assign more descriptive
names making them more user friendly. With this change -
Cold cluster section for function foo is named "foo.cold"
Exception cluster section for function foo is named "foo.eh"
Other cluster sections identified by their ids are named "foo.ID"
Using this format works well with existing tools. It will demangle as
expected and works with existing symbolizers, profilers and debuggers
out of the box.
$ c++filt _Z3foov.cold
foo() [clone .cold]
$ c++filt _Z3foov.eh
foo() [clone .eh]
$c++filt _Z3foov.1234
foo() [clone 1234]
Tests for basicblock-sections are updated with some cleanup where
appropriate.
Differential Revision: https://reviews.llvm.org/D79221
Before this patch, global variables didn't have their namespace prepended in the Codeview debug symbol stream. This prevented Visual Studio from displaying them in the debugger (they appeared as 'unspecified error')
Differential Revision: https://reviews.llvm.org/D79028
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
The two code paths have the same goal, legalizing a load of a non-byte-sized vector by loading the "flattened" representation in memory, slicing off each single element and then building a vector out of those pieces.
The technique employed by `ExpandLoad` is slightly more convoluted and produces slightly better codegen on ARM, AMDGPU and x86 but suffers from some bugs (D78480) and is wrong for BE machines.
Differential Revision: https://reviews.llvm.org/D79096
rL368553 added SimplifyMultipleUseDemandedBits handling for ISD::TRUNCATE to SimplifyDemandedBits so we don't need to duplicate this (and it gets rid of another GetDemandedBits call which is slowly being replaced with SimplifyMultipleUseDemandedBits anyhow).
Also fix some cost tables for vXi1 types to match the costs entries for the types they will be promoted to.
Differential Revision: https://reviews.llvm.org/D79045
X86 matches several 'shift+xor' funnel shift patterns:
fold (or (srl (srl x1, 1), (xor y, 31)), (shl x0, y)) -> (fshl x0, x1, y)
fold (or (shl (shl x0, 1), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
fold (or (shl (add x0, x0), (xor y, 31)), (srl x1, y)) -> (fshr x0, x1, y)
These patterns are also what we end up with the proposed expansion changes in D77301.
This patch moves these to DAGCombine's generic MatchFunnelPosNeg.
All existing X86 test cases still pass, and we just have a small codegen change in pr32282.ll.
Reviewed By: @spatel
Differential Revision: https://reviews.llvm.org/D78935
Summary:
This patch tries to ensure that we do something sensible when
generating code for the ISD::INSERT_VECTOR_ELT DAG node when operating
on scalable vectors. Previously we always returned 'undef' when
inserting an element into an out-of-bounds lane index, whereas now
we only do this for fixed length vectors. For scalable vectors it
is assumed that the backend will do the right thing in the same way
that we have to deal with variable lane indices.
In this patch I have permitted a few basic combinations for scalable
vector types where it makes sense, but in general avoided most cases
for now as they currently require the use of BUILD_VECTOR nodes.
This patch includes tests for all scalable vector types when inserting
into lane 0, but I've only included one or two vector types for other
cases such as variable lane inserts.
Differential Revision: https://reviews.llvm.org/D78992
Prior to D69446 I had done some NFC cleanup to make landing an iterative
outliner a cleaner more straight-forward patch. Since then, it seems that has
landed but I noticed some ways it could be cleaned up. Specifically:
1) doOutline was meant to be the re-runable function, but instead
runOnceOnModule was created that just calls doOutline.
2) In D69446 we discussed that the flag allowing the re-run of the
outliner should be a flag to tell how many additional times to run
the outliner again, not the total number of times. I don't think it
makes sense to introduce a flag, but print an error if the flag is
set to 0.
This is an NFCi, the i being that I get rid of the way that the
machine-outline-runs flag could be used to tell the outliner to not run
at all, and because I renamed the flag to '-machine-outliner-reruns'.
Differential Revision: https://reviews.llvm.org/D79070
Call getNegatedExpression(Cost) and check the Cost to make the code more clear.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D78347
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
The code assumed that zero-extending the integer constant to the
designated alloc size would be fine even for BE targets, but that's not
the case as that pulls in zeros from the MSB side while we actually
expect the padding zeros to go after the LSB.
I've changed the codepath handling the constant integers to use the
store size for both small(er than u64) and big constants and then add
zero padding right after that.
Differential Revision: https://reviews.llvm.org/D78011
like .cfi_restore"
Insert .cfi_offset/.cfi_register when IncomingCSRSaved of current block
is larger than OutgoingCSRSaved of its previous block.
Original commit message:
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
Summary:
Reviewing failures identified in D78586, I was finding the identifiers
for these iterators hard to read.
Reviewers: efriedma, MaskRay, jyknight
Reviewed By: MaskRay
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78849
The tl;dr story is that this causes jumps in the emitted line
tables, even at `-O0`. We could at some point consider more fancy
solutions to preserve locations, but it doesn't seem to be worth
the effort for now.
<rdar://problem/62460788>
Differential Revision: https://reviews.llvm.org/D78947
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
This is a NFC patch for D77319. The idea is to hide the getNegatibleCost inside the getNegatedExpression()
to have it return null if the cost is expensive, and add some helper function for easy to use. And
rename the old getNegatedExpression to negateExpression to avoid the semantic conflict.
Reviewed By: RKSimon
Differential revision: https://reviews.llvm.org/D78291
Summary:
Instead of adding a ".unlikely" or ".eh" suffix for machine basic blocks,
this change updates the behaviour to use an appropriate prefix
instead. This allows lld to group basic block sections together
when -z,keep-text-section-prefix is specified and matches the behaviour
observed in gcc.
Reviewers: tmsriram, mtrofin, efriedma
Reviewed By: tmsriram, efriedma
Subscribers: eli.friedman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78742
Follow-up of D78082 and D78590.
Otherwise, because xray_instr_map is now read-only, the absolute
relocation used for Sled.Function will cause a text relocation.
A previous bug fix for varargs introduced a regression where we would
incorrectly widen some stores to memory when passing i8/i16 parameters on the
stack. This didn't show up seemingly because it only happens when there is
no signext/zeroext parameter attribute, which I think for Darwin clang adds.
Swift however seems to be a different story, and a plain anyext on the parameter
triggered the bug.
To fix this, I've added a new ValueHandler::assignValueToAddress type override
which lets us distiguish between varargs and fixed args (we still need this
widening behaviour for varargs to fix the original bug in 2018).
rdar://61353552
Summary:
Add a check to make sure that MachineInstr::mayAlias returns prematurely if at least one of its instruction parameters does not access memory. This prevents calls to TargetInstrInfo::areMemAccessesTriviallyDisjoint with incompatible instructions.
A side effect of this change is to render the mayAlias helper in the AArch64 load/store optimizer obsolete. We can now directly call the MachineInstr::mayAlias member function.
Reviewers: hfinkel, t.p.northover, mcrosier, eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78823
Follow-up of D78082 (x86-64).
This change avoids dynamic relocations in `xray_instr_map` for ARM/AArch64/powerpc64le.
MIPS64 cannot use 64-bit PC-relative addresses because R_MIPS_PC64 is not defined.
Because MIPS32 shares the same code, for simplicity, we don't use PC-relative addresses for MIPS32 as well.
Tested on AArch64 Linux and ppc64le Linux.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D78590
Summary:
Given a VL=14 that is enveloped by a proper VL=16, splitting the
masked load using the enveloping halving VL=8/8 should yields
should eventually yield V=8/5. This fixes various assert failures
in getHalfNumVectorElementsVT() and IncrementMemoryAddress().
Note, I suspect similar fixes will be needed for other masked
operations, but for now I send out a fix for masked load only.
Bugzilla issue 45563
https://bugs.llvm.org/show_bug.cgi?id=45563
Reviewers: craig.topper, mehdi_amini, nicolasvasilache
Reviewed By: craig.topper
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78608
Using getValueType() is not correct for architectures extended with CHERI since
we need a pointer type and not the value that is loaded. While stack
protector is useless when you have CHERI (since CHERI provides much
stronger security guarantees), we still have a test to check that we can
generate correct code for checks. Merging b281138a1b
into our tree broke this test. Fix by using TLI.getFrameIndexTy().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D77785
Loosen the restriction on what kinds of opcodes can be CSEd as
targets may want to CSE some generic target specific pseudos.
NFC as far as this change is concerned as CSEConfig still pretty much is
a subset of this check.
Differential Revision: https://reviews.llvm.org/D78684
Summary:
Fix an issue where the presence of debug info could disable a peephole
optimization due to areCFlagsAccessedBetweenInstrs returning the wrong
result.
In test/CodeGen/AArch64/arm64-csel.ll, the issue was found in the
function @foo5, in which the first compare could successfully be
optimized but not the second.
Reviewers: t.p.northover, eastig, paquette
Subscribers: kristof.beyls, hiraditya, danielkiss, aprantl, dsanders, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78157
Summary:
Fix an issue where the presence of debug info could disable a peephole
optimization in optimizeCompareInstr due to canInstrSubstituteCmpInstr
returning the wrong result.
Depends on D78137.
Reviewers: t.p.northover, eastig, paquette
Subscribers: kristof.beyls, hiraditya, danielkiss, aprantl, llvm-commits, dsanders
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78151
Summary:
While lowering memory intrinsics, GIsel attempts to form a tail call to
a library routine.
There might be a DBG_LABEL or something after the intrinsic call,
though: in that case, GIsel should still be able to form the tail call,
and should also delete the debug insts after the tail call as the
transform makes them invalid.
Reviewers: dsanders, aemerson
Subscribers: hiraditya, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78335
Summary:
Fix an issue which could result in ElideBrByInvertingCond or
CombineIndexedLoadStore being missed when debug info is present. In both
cases the fix is s/hasOneUse/hasOneNonDbgUse/.
Reviewers: aemerson, dsanders
Subscribers: hiraditya, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78254
Summary:
This fixes several issues where the presence of debug instructions could
disable certain combines, due to dominance queries finding uses/defs that
don't actually exist.
Reviewers: dsanders, fhahn, paquette, aemerson
Subscribers: hiraditya, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78253
Summary:
It looks like RegBankSelect can try to assign a bank based on a
DBG_VALUE instead of ignoring it. This eventually leads to an assert
in AArch64RegisterBankInfo::getInstrMapping because there is some info
missing from the DBG_VALUE MachineOperand (I see: `Assertion failed:
(RawData != 0 && "Invalid Type"), function getScalarSizeInBits`).
I'm not 100% sure it's safe to insert DBG_VALUE instructions right
before RegBankSelect (that's what -debugify-and-strip-all-safe is
doing). Any advice appreciated.
Depends on D78135.
Reviewers: ab, qcolombet, dsanders, aprantl
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78137
Summary:
These helpers are exercised by follow-up commits in this patch series,
which is all about removing CodeGen differences with vs. without debug
info in the AArch64 backend.
Reviewers: fhahn, aprantl, jpaquette, paquette
Subscribers: kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78260
Summary:
Teach MachineDebugify how to insert DBG_VALUE instructions. This can
help find bugs causing CodeGen differences when debug info is present.
DBG_VALUE instructions are only emitted when -debugify-level is set to
locations+variables.
There is essentially no attempt made to match up DBG_VALUE register
operands with the local variables they ought to correspond to. I'm not
sure how to improve the situation. In some cases (MachineMemOperand?)
it's possible to find the IR instruction a MachineInstr corresponds to,
but in general this seems to call for "undoing" the work done by ISel.
Reviewers: dsanders, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78135
Summary:
Make GenericScheduler compute SchedDFSResult on initialization if
the policy is set. This makes it possible to create classes
that extend GenericScheduler and rely on the results of SchedDFSResult,
e.g. to perform subtree scheduling.
NFC unless the policy is set.
Subscribers: MatzeB, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78432
Preserving liveness can be useful even late in the pipeline, if we're
doing substantial optimization work afterwards. (See, for example,
D76065.) Teach MachineOutliner how to correctly set live-ins on the
basic block in outlined functions.
Differential Revision: https://reviews.llvm.org/D78605
Hash Jump Table Indices uniquely within a basic block for MIR
Canonicalizer / MIR VReg Renamer passes.
Differential Revision: https://reviews.llvm.org/D77966
We were disabling verification for no reason in a bunch of places; just
turn it on.
At this point, there are two key places where we don't run verification:
during register allocation, and after addPreEmitPass. Regalloc probably
isn't worth messing with; it has its own invariants, and verifying
afterwards is probably good enough. For after addPreEmitPass, it's
probably worth investigating improvements.
In a future change we should properly fix xray_fn_idx to use PC-relative
addresses as well, but for now let's keep absolute addresses until sled
addresses are all fixed.
Summary:
Machine Block Frequency Info (MBFI) is being computed but unused in AsmPrinter.
MBFI computation was introduced with PGO change D71149 and then its use was
removed in D71106. No need to keep computing it.
Reviewers: MaskRay, jyknight, skan, yamauchi, davidxl, efriedma, huihuiz
Reviewed By: MaskRay, skan, yamauchi
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78526
xray_instr_map contains absolute addresses of sleds, which are relocated
by `R_*_RELATIVE` when linked in -pie or -shared mode.
By making these addresses relative to PC, we can avoid the dynamic
relocations and remove the SHF_WRITE flag from xray_instr_map. We can
thus save VM pages containg xray_instr_map (because they are not
modified).
This patch changes x86-64 and bumps the sled version to 2. Subsequent
changes will change powerpc64le and AArch64.
Reviewed By: dberris, ianlevesque
Differential Revision: https://reviews.llvm.org/D78082
Summary:
The repeated use of std::next() on a MachineBasicBlock::iterator was
clever, but we only need to reconstruct the iterator post creation of
the spill instruction.
This helps simplifying where we plan to place the spill, as discussed in
D77849.
From here, we can simplify the code a little by flipping the return code
of a helper.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: qcolombet, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78520
- Adding changes to support comments on outlined functions with outlining for the conditions through which it was outlined (e.g. Thunks, Tail calls)
- Adapts the emitFunctionHeader to print out a comment next to the header if the target specifies it based on information in MachineFunctionInfo
- Adds mir test for function annotiation
Differential Revision: https://reviews.llvm.org/D78062
Summary:
Similar to the CallLowering class used for lowering LLVM IR calls to MIR calls,
we introduce a separate class for lowering LLVM IR inline asm to MIR INLINEASM.
There is no functional change yet, all existing tests should pass.
Reviewers: arsenm, dsanders, aemerson, volkan, t.p.northover, paquette
Reviewed By: aemerson
Subscribers: gargaroff, wdng, mgorny, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78316
Summary:
The patch D29014 has added the new ISD::FREEZE and can deal with the
integer.
The patch D76980 has added SoftenFloatRes_FREEZE for float point.
But we still lack of expand for ppc_fp128, this will cause assertion for
some cases.
This patch is to support freeze expand for ppc_fp128.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78278
[MachineOutliner] fix test for excluding CFI and add test to include CFI in outlining
New test to check that we only outline CFI instruction if all CFI
Instructions in the function would be captured by the outlining
adding x86 tests analagous to AARCH64 cfi tests
Revision: https://reviews.llvm.org/D77852
We should only modify existing ones. Previously, we were creating
MachineFunctions for externally-available functions. AFAICT this was benign
in tree but ultimately led to asan bugs in our out of tree target.
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
Summary:
AIX symbol have qualname and unqualified name. The stock getSymbol
could only return unqualified name, which leads us to patch many
caller side(lowerConstant, getMCSymbolForTOCPseudoMO).
So we should try to address this problem in the callee
side(getSymbol) and clean up the caller side instead.
Note: this is a "mostly" NFC patch, with a fix for the original
lowerConstant behavior.
Differential Revision: https://reviews.llvm.org/D78045
This allows targets to know exactly which operands are contributing to
the dependency, which is required for targets with per-operand
scheduling models.
Differential Revision: https://reviews.llvm.org/D77135
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
Ensure that symbols explicitly* assigned a section name are placed into
a section with a compatible entry size.
This is done by creating multiple sections with the same name** if
incompatible symbols are explicitly given the name of an incompatible
section, whilst:
- Avoiding using uniqued sections where possible (for readability and
to maximize compatibly with assemblers).
- Creating as few SHF_MERGE sections as possible (for efficiency).
Given that each symbol is assigned to a section in a single pass, we
must decide which section each symbol is assigned to without seeing the
properties of all symbols. A stable and easy to understand assignment is
desirable. The following rules facilitate this: The "generic" section
for a given section name will be mergeable if the name is a mergeable
"default" section name (such as .debug_str), a mergeable "implicit"
section name (such as .rodata.str2.2), or MC has already created a
mergeable "generic" section for the given section name (e.g. in response
to a section directive in inline assembly). Otherwise, the "generic"
section for a given name is non-mergeable; and, non-mergeable symbols
are assigned to the "generic" section, while mergeable symbols are
assigned to uniqued sections.
Terminology:
"default" sections are those always created by MC initially, e.g. .text
or .debug_str.
"implicit" sections are those created normally by MC in response to the
symbols that it encounters, i.e. in the absence of an explicit section
name assignment on the symbol, e.g. a function foo might be placed into
a .text.foo section.
"generic" sections are those that are referred to when a unique section
ID is not supplied, e.g. if there are multiple unique .bob sections then
".quad .bob" will reference the generic .bob section. Typically, the
generic section is just the first section of a given name to be created.
Default sections are always generic.
* Typically, section names might be explicitly assigned in source code
using a language extension e.g. a section attribute: _attribute_
((section ("section-name"))) -
https://clang.llvm.org/docs/AttributeReference.html
** I refer to such sections as unique/uniqued sections. In assembly the
", unique," assembly syntax is used to express such sections.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43457.
See https://reviews.llvm.org/D68101 for previous discussions leading to
this patch.
Some minor fixes were required to LLVM's tests, for tests had been using
the old behavior - which allowed for explicitly assigning globals with
incompatible entry sizes to a section.
This fix relies on the ",unique ," assembly feature. This feature is not
available until bintuils version 2.35
(https://sourceware.org/bugzilla/show_bug.cgi?id=25380). If the
integrated assembler is not being used then we avoid using this feature
for compatibility and instead try to place mergeable symbols into
non-mergeable sections or issue an error otherwise.
Differential Revision: https://reviews.llvm.org/D72194
Summary:
Original description (https://reviews.llvm/org/D69924)
Without this change, when a nested tag type of any kind (enum, class,
struct, union) is used as a variable type, it is emitted without
emitting the parent type. In CodeView, parent types point to their inner
types, and inner types do not point back to their parents. We already
walk over all of the parent scopes to build the fully qualified name.
This change simply requests their type indices as we go along to enusre
they are all emitted.
Now, while walking over the parent scopes, add the types to
DeferredCompleteTypes, since they might already be in the process of
being emitted.
Fixes PR43905
Reviewers: rnk, amccarth
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78249
Summary:
This verifier tries to ensure that DebugLoc's don't just disappear as
we transform the MIR. It observes the instructions created, erased, and
changed and at checkpoints chosen by the client algorithm verifies the
locations affected by those changes.
In particular, it verifies that:
* Every DebugLoc for an erased/changing instruction is still present on
at least one new/changed instruction
* Failing that, that there is a line-0 location in the new/changed
instructions. It's not possible to confirm which locations were merged so
it conservatively assumes all unaccounted for locations are accounted
for by any line-0 location to avoid false positives.
If that fails, it prints the lost locations in the debug output along with
the instructions that should have accounted for them.
In theory, this is usable by the legalizer, combiner, selector and any other
pass that performs incremental changes to the MIR. However, it has so far
only really been tested on the legalizer (not including the artifact
combiner) where it has caught lots of lost locations, particularly in Custom
legalizations. There's only one example here as my initial testing was on an
out-of-tree target and I haven't done a pass over the in-tree targets yet.
Depends on D77575, D77446
Reviewers: bogner, aprantl, vsk
Subscribers: jvesely, nhaehnle, mgorny, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77576
Summary:
This will allow us to fix the issue where the lost locations
verifier causes CodeGen changes on lost locations because it
falls back on DAGISel
Reviewers: qcolombet, bogner, aprantl, vsk, paquette
Subscribers: rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78261
BreakPHIEdge would be set based on whether the instruction needs to
insert a new critical edge to allow sinking into a block where the uses
are PHI nodes. But for instructions with multiple defs it would be reset
on the second def, allowing the instruciton to sink where it should not.
Fixes PR44981
Differential Revision: https://reviews.llvm.org/D78087
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
Summary:
The current handleMoveIntoBundle implementation is unusable,
it attempts to access the slot indexes of bundled instructions.
It also leaves bundled instructions with slot indexes assigned.
Replace handleMoveIntoBundle this with a more explicit
handleMoveIntoNewBundle function which recalculates the live
intervals for all instructions moved into a newly formed bundle,
and removes slot indexes from these instructions.
Reviewers: arsenm, MaskRay, kariddi, tpr, qcolombet
Reviewed By: qcolombet
Subscribers: MatzeB, wdng, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77969
In D68209, LiveDebugValues::transferDebugValue had a call to
OpenRanges.erase shifted, and by accident this led to a code path where
DBG_VALUEs of $noreg would not have their open range terminated, allowing
variable locations to extend past blocks where they were terminated.
This patch correctly terminates the open range, if present, when such a
DBG_VAUE is encountered, and adds a test for this behaviour.
Differential Revision: https://reviews.llvm.org/D78218
The "Align" passed into getMachineMemOperand etc. is the alignment of
the MachinePointerInfo, not the alignment of the memory operation.
(getAlign() on a MachineMemOperand automatically reduces the alignment
to account for this.)
We were passing on wrong (overconservative) alignment in a bunch of
places. Fix a bunch of these, mostly in legalization. And while I'm
here, switch to the new Align APIs.
The test changes are all scheduling changes: the biggest effect of
preserving large alignments is that it improves alias analysis, so the
scheduler has more freedom.
(I was originally just trying to do a minor cleanup in
SelectionDAGBuilder, but I accidentally went deeper down the rabbit
hole.)
Differential Revision: https://reviews.llvm.org/D77687
Summary:
As a follow up to https://reviews.llvm.org/D29014, add translation
support for freeze.
Introduce a new generic instruction G_FREEZE and translate freeze to it.
Reviewers: dsanders, aqjune, arsenm, aditya_nandakumar, t.p.northover, lebedev.ri, paquette, aemerson
Reviewed By: aqjune, arsenm
Subscribers: fhahn, lebedev.ri, wdng, rovka, hiraditya, jfb, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77795
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
To simplify future work on statepoint representation, hide
direct access to statepoint field indices and provide getters
for them. Add getters for couple more statepoint fields.
This also fixes two bugs in MachineVerifier for statepoint:
First, the `break` statement was falling out of `if` statement
scope, thus disabling following checks.
Second, it was incorrectly accessing some fields like CallingConv -
StatepointOpers gives index to their value directly, not to
preceeding field type encoding.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D78119
This is a minor NFC change to make the code more clear. We have the NegatibleCost that
has cheaper, neutral, and expensive. Typically, the smaller one means the less cost.
It is inverse for current implementation, which makes following code not easy to read.
If (CostX > CostY) negate(X)
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D77993
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
in the same section.
This allows specifying BasicBlock clusters like the following example:
!foo
!!0 1 2
!!4
This places basic blocks 0, 1, and 2 in one section in this order, and
places basic block #4 in a single section of its own.
Summary:
Share logic to strip debugify metadata between the IR and MIR level
debugify passes. This makes it simpler to hunt for bugs by diffing IR
with vs. without -debugify-each turned on.
As a drive-by, fix an issue causing CallGraphNodes to become invalid
when a dead llvm.dbg.value prototype is deleted.
Reviewers: dsanders, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77915
Since 1725f28841, this should check
isFMADLegalForFAddFSub rather than the the plain isOperationLegal.
This would assert in a subset of cases due to an oddity in how FMAD is
selected. We will allow FMA formation pre-legalize, but not FMAD even
in cases where it would be valid.
The current hook requires passing in the root fadd/fsub. However, in
this distributed case, this would be far more complicated to pass in
the relevant operand. AMDGPU doesn't get any value from the node, and
only needs the type and is the only implementor, so I'm not sure why
we have this complexity. Just rename and expand the assert to avoid
the more complicated checks spread through the distribution logic.
Sometimes LegalizeTypes knows about common subexpressions before SelectionDAG
does, leading to accidental SDValue removal before its reference count was
truly zero.
Differential Revision: https://reviews.llvm.org/D76994
Reviewed-By: bjope
Fixes: https://bugs.llvm.org/show_bug.cgi?id=45049
Reverted in 3ce77142a6 because the previous patch
broke the expensive-checks bots. The new patch removes the broken check.
Summary: A count profile may affect tail duplication's heuristic causing a block to be duplicated in only a part of its predecessors. This is not allowed in the Machine Block Placement pass where an assert will go off. I'm removing the assert and making the optimization bail out when such case happens.
Reviewers: wenlei, davidxl, Carrot
Reviewed By: Carrot
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77748
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
This is the same as what was done to the CallLoweringInfo in
TargetLowering.h in r309159.
This is just a step on the way to replacing this with CallBase.
I only left it at the interface to ParseConstraints since that
needs updates to other callers in different files. I'll do that
as a follow up.
Differential Revision: https://reviews.llvm.org/D77892
Summary:
This allows us to test each backend pass under the presence
of debug info using pre-existing tests. The tests should not
fail as a result of this so long as it's true that debug info
does not affect CodeGen.
In practice, a few tests are sensitive to this:
* Tests that check the pass structure (e.g. O0-pipeline.ll)
* Tests that check --debug output. Specifically instruction
dumps containing MMO's (e.g. prelegalizercombiner-extends.ll)
* Tests that contain debugify metadata as mir-strip-debug will
remove it (e.g. fastisel-debugvalue-undef.ll)
* Tests with partial debug info (e.g.
patchable-function-entry-empty.mir had debug info but no
!llvm.dbg.cu)
* Tests that check optimization remarks overly strictly (e.g.
prologue-epilogue-remarks.mir)
* Tests that would inject the pass in an unsafe region (e.g.
seqpairspill.mir would inject between register alloc and
virt reg rewriter)
In all cases, the checks can either be updated or
--debugify-and-strip-all-safe=0 can be used to avoid being
affected by something like llvm-lit -Dllc='llc --debugify-and-strip-all-safe'
I tested this without the lost debug locations verifier to
confirm that AArch64 behaviour is unaffected (with the fixes
in this patch) and with it to confirm it finds the problems
without the additional RUN lines we had before.
Depends on D77886, D77887, D77747
Reviewers: aprantl, vsk, bogner
Subscribers: qcolombet, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77888
Summary:
A few tests start out with debug info and expect it to reach
the output. For these tests we shouldn't strip the debug info
Reviewers: aprantl, vsk, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77886
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
Summary:
At the moment, any changes we make to the passes that can be
injected before/after others (e.g. -verify-machineinstrs and
-print-after-all) have to be duplicated in both
TargetPassConfig (for normal execution, -start-before/
-stop-before/etc) and llc (for -run-pass). Unify this pass
injection into addMachinePrePass/addMachinePostPass that both
TargetPassConfig and llc can use.
Reviewers: vsk, aprantl, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77887
Summary:
Refactor LiveRangeCalc such that it is now split into two classes
The objective is to split all the "register specific" logic away
from LiveRangeCalc.
The two new classes created are:
- LiveRangeCalc - is meant as a generic class to compute and modify
live ranges in a generic way. This class should deal only with
SlotIndices and VNInfo objects.
- LiveIntervalCals - is meant to be equivalent to the old LiveRangeCalc.
It computes the liveness virtual registers tracked by a LiveInterval
object.
With this refactoring LiveRangeCalc can be used to implement tracking of
liveness of LiveRanges that represent other things than just registers.
Subscribers: MatzeB, qcolombet, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76584
Remove a number of includes that aren't necessary (nor are we relying on the remaining includes to provide the declarations), we just needed a llvm::Instruction forward declaration.
This exposed a couple of source files that were implicitly replying on the includes for their use of llvm::SmallSet or std::set, requiring local includes to be added there instead.
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, danstrushin
Reviewed By: dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77797
Summary:
Removes:
* All LLVM-IR level debug info using StripDebugInfo()
* All debugify metadata
* 'Debug Info Version' module flag
* All (valid*) DEBUG_VALUE MachineInstrs
* All DebugLocs from MachineInstrs
This is a more complete solution than the previous MIRPrinter
option that just causes it to neglect to print debug-locations.
* The qualifier 'valid' is used here because AArch64 emits
an invalid one and tests depend on it
Reviewers: vsk, aprantl, bogner
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77747
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, dantrushin
Reviewed By: reames, dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77371
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
Summary:
Preserve call site info for duplicated instructions. We copy over the
call site info in CloneMachineInstrBundle to avoid repeated calls to
copyCallSiteInfo in CloneMachineInstr.
(Alternatively, we could copy call site info higher up the stack, e.g.
into TargetInstrInfo::duplicate, or even into individual backend passes.
However, I don't see how that would be safer or more general than the
current approach.)
Reviewers: aprantl, djtodoro, dstenb
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77685
This is a performance patch that hoists two conditions in DwarfDebug's
validThroughout to avoid a linear-scan of all instructions in a block. We
now exit early if validThrougout will never return true for the variable
location.
The first added clause filters for the two circumstances where
validThroughout will return true. The second added clause should be
identical to the one that's deleted from after the linear-scan.
Differential Revision: https://reviews.llvm.org/D77639
Summary:
This fixes PR45302.
Previously the case
BB1
/ \
| |
TBB FBB
| |
\ /
BB2
was treated as a valid diamond also when TBB and FBB was the same basic
block. This then lead to a failed assertion in IfConvertDiamond.
Since TBB == FBB is quite a degenerated case of a diamond, we now
don't treat it as a valid diamond anymore, and thus we will avoid the
trouble of making IfConvertDiamond handle it correctly.
Reviewers: efriedma, kparzysz
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77651
Summary:
When narrowing G_IMPLICIT_DEF where the original size is not a multiple
of the narrow size, emit a smaller G_IMPLICIT_DEF and use G_ANYEXT.
To prevent a potential endless loop in the legalizer, the condition
to combine G_ANYEXT(G_IMPLICIT_DEF) is changed from isInstUnsupported
to !isInstLegal, since in this case the combine is only valid if
consequent legalization of the newly combined G_IMPLICIT_DEF does not
introduce G_ANYEXT due to narrowing.
Although this legalization for G_IMPLICIT_DEF would also be valid for
the general case, it actually caused a lot of code regressions when
tried due to superfluous COPYs and combines not getting hit anymore.
Reviewers: dsanders, aemerson, volkan, arsenm, aditya_nandakumar
Reviewed By: arsenm
Subscribers: jvesely, nhaehnle, kerbowa, wdng, rovka, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76598
Summary:
Re-used the IR-level debugify for the most part. The MIR-level code then
adds locations to the MachineInstrs afterwards based on the LLVM-IR debug
info.
It's worth mentioning that the resulting locations make little sense as
the range of line numbers used in a Function at the MIR level exceeds that
of the equivelent IR level function. As such, MachineInstrs can appear to
originate from outside the subprogram scope (and from other subprogram
scopes). However, it doesn't seem worth worrying about as the source is
imaginary anyway.
There's a few high level goals this pass works towards:
* We should be able to debugify our .ll/.mir in the lit tests without
changing the checks and still pass them. I.e. Debug info should not change
codegen. Combining this with a strip-debug pass should enable this. The
main issue I ran into without the strip-debug pass was instructions with MMO's and
checks on both the instruction and the MMO as the debug-location is
between them. I currently have a simple hack in the MIRPrinter to
resolve that but the more general solution is a proper strip-debug pass.
* We should be able to test that GlobalISel does not lose debug info. I
recently found that the legalizer can be unexpectedly lossy in seemingly
simple cases (e.g. expanding one instr into many). I have a verifier
(will be posted separately) that can be integrated with passes that use
the observer interface and will catch location loss (it does not verify
correctness, just that there's zero lossage). It is a little conservative
as the line-0 locations that arise from conflicts do not track the
conflicting locations but it can still catch a fair bit.
Depends on D77439, D77438
Reviewers: aprantl, bogner, vsk
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77446
This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
RDA sometimes needs to visit blocks twice, to take into account
reaching defs coming in along loop back edges. Currently it handles
repeated visitation the same way as usual, which means that it will
scan through all instructions and their reg unit defs again. Not
only is this very inefficient, it also means that all reaching defs
in loops are going to be inserted twice.
We can do much better than this. The only thing we need to handle
is a new reaching def from a predecessor, which either needs to be
prepended to the reaching definitions (if there was no reaching def
from a predecessor), or needs to replace an existing predecessor
reaching def, if it is more recent. Since D77508 we only store the
most recent predecessor reaching def, so that's the only one that
may need updating.
This also has the nice side-effect that reaching definitions are
now automatically sorted and unique, so drop the llvm::sort() call
in favor of an assertion.
Differential Revision: https://reviews.llvm.org/D77511
An instruction may define the same reg unit multiple times,
avoid inserting the same reaching def multiple times in that case.
Also print the reg unit, rather than the super-register, in the
debug code.
Move the logic whether lowering of deopt value requires a spill slot in
a separate lambda.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77629
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
Summary:
In lieu of a proper pass that strips debug info, add a way
to omit debug-locations from the MIR output so that
instructions with MMO's continue to match CHECK's when
mir-debugify is used
Reviewers: aprantl, bogner, vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77575
Summary:
To debugify MIR, we need to be able to create metadata and to do that, we
need a non-const Module. However, MachineFunction only had a const reference
to the Function preventing this.
Reviewers: aprantl, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77439
A global symbol that is defined in a comdat should not generate an alias since
call sites that would've referred to that symbol will refer to their own
independent local aliases rather than the surviving global comdat one. This
could result in something that looks like:
```
ld.lld: error: relocation refers to a discarded section: .text._ZN3fbl8internal18NullFunctionTargetIvJjjPjEED1Ev.stub
>>> defined in user-x64-clang/obj/system/ulib/minfs/libminfs.a(minfs._sources.file.cc.o)
>>> section group signature: _ZN3fbl8internal18NullFunctionTargetIvJjjPjEED1Ev.stub
>>> prevailing definition is in user-x64-clang/obj/system/ulib/minfs/libminfs.a(minfs._sources.vnode.cc.o)
>>> referenced by function.h:169 (../../zircon/system/ulib/fbl/include/fbl/function.h:169)
>>> minfs._sources.file.cc.o:(minfs::File::AllocateAndCommitData(std::__2::unique_ptr<minfs::Transaction, std::__2::default_delete<minfs::Transaction> >)) in archive user-x64-clang/obj/system/ulib/minfs/libminfs.a
```
We ran into this when experimenting with a new C++ ABI for fuchsia
(refer to D72959) which takes relative offsets between comdat'd functions
which is why the normal C++ user wouldn't run into this.
Differential Revision: https://reviews.llvm.org/D77429
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
When entering a basic block, RDA inserts reaching definitions coming
from predecessor blocks (which will be negative numbers) in a rather
peculiar way. If you have incoming reaching definitions -4, -3, -2, -1,
it will insert those. If you have incoming reaching definitions
-1, -2, -3, -4, it will insert -1, -1, -1, -1, as the max is taken
at each step. That's probably not what was intended...
However, RDA only actually cares about the most recent reaching
definition from a predecessor (to calculate clearance), so this
ends up working fine as far as behavior is concerned. It does
waste memory on unnecessary reaching definitions though.
This patch changes the implementation to first compute the most
recent reaching definition in one loop, and then insert only that
one in a separate loop.
Differential Revision: https://reviews.llvm.org/D77508
At the end of a basic block, RDA adjusts all the reaching defs it
found to be relative to the end of the basic block, rather than the
start of it. However, it also does this to registers which don't
have a reaching def, indicated by ReachingDefDefaultVal. This means
that code checking against ReachingDefDefaultVal will not skip them,
and may insert them into the reaching definition list. This is
ultimately harmless, but causes unnecessary work and is logically
not right.
Differential Revision: https://reviews.llvm.org/D77506
Summary:
This patch adds support for emission of following DWARFv5 macro forms
in .debug_macro section.
1. DW_MACRO_start_file
2. DW_MACRO_end_file
3. DW_MACRO_define_strp
4. DW_MACRO_undef_strp.
Reviewed By: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D72828
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
We're ANDing with 1 right after which will cause the SIGN_EXTEND to
be combined to ANY_EXTEND later. Might as well just start with an
ANY_EXTEND.
While there replace create the AND using the getZeroExtendInReg
helper to remove the need to explicitly create the VecOnes constant.
This code is replacing a shift with a new shift on an extended type.
If the shift amount type can't represent the maximum shift amount
for the new type, the amount needs to be extended to a type that
can.
Previously, the code just hardcoded a check for 256 bits which
seems to have been an assumption that the original shift amount
was MVT::i8. But that seems more catered to a specific target
like X86 that uses i8 as its legal shift amount type. Other
targets may use different types.
This commit changes the code to look at the real type of the shift
amount and makes sure it has enough bits for the Log2 of the
new type. There are similar checks to this in SelectionDAGBuilder
and LegalizeIntegerTypes.
Previously line table symbol was represented as `DIE::value_iterator`
inside `DwarfCompileUnit` and subsequent function `intStmtList`
was used to create a local `MCSymbol` to initialize it.
This patch removes `DIE::value_iterator` from `DwarfCompileUnit`
and intoduce `MCSymbol` for representing this units symbol for
`debug_line` section. As a result `applyStmtList` is also modified
to utilize this. Further more a helper function `getLineTableStartSym`
is also introduced to get this symbol, this would be used by clients
which need to access this line table, i.e `debug_macro`.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D77489
The newly-created constant zero will need an extra register to hold it
in the current statepoint lowering implementation. Remove it if there
exists one.
Summary:
D77423 started using a dominator tree in WasmEHPrepare, but we deleted
BBs in `prepareThrows` before we used the domtree in `prepareEHPads`,
and those CFG changes were not reflected in the domtree. This uses
`DomTreeUpdater` to make sure we update the domtree every time we delete
BBs from the CFG. This fixes ubsan/msan/expensive_check errors caught in
LLVM buildbots.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77465
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
Summary:
For current architect, we always require setContainingCsect to be
called on every MCSymbol got used in XCOFF context.
This is very hard to achieve because symbols gets created everywhere
and other MCSymbol types(ELF, COFF) do not have similar rules.
It's very easy to miss setting the containing csect, and we would
need to add a lot of XCOFF specialized code around some common code area.
This patch intendeds to do
1. Rely on getFragment().getParent() to get csect from labels.
2. Only use get/setRepresentedCsect (was get/setContainingCsect)
if symbol itself represents a csect.
Reviewers: DiggerLin, hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D77080
Summary: I think it would be better to require the alignment to be >= 1. It is currently confusing to allow both values.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77372
isGCValue should detect whether the deopt value is a GC pointer.
Currently it checks by finding the value in SI.Bases and SI.Ptrs.
However these data structures contain only those values which
have corresponding gc.relocate call. So we can miss GC value if it
does not have gc.relocate call (dead after the call).
Check GC strategy whether pointer is GC one or consider any pointer
to be GC one conservatively.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77130
When compiling AMDGPUDisassembler.cpp in a stage 1 trunk build with
CMAKE_BUILD_TYPE=RelWithDebInfo LLVM_USE_SANITIZER=Address LiveDebugVariables
accounts for 21.5% wall clock time. This fix reduces that to 1.2% by switching
out a linked list lookup with a map lookup.
Note that the linked list is still used to group UserValues by vreg. The vreg
lookups don't cause any problems in this pathological case.
This is the same idea as D68816, which was reverted, except that it is a less
intrusive fix.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D77226
The legalizer has a tendency to lose DebugLoc's when expanding or
combining instructions. The verifier that detected these isn't ready
for upstreaming yet but this patch fixes the cases that came up when
applying it to our out-of-tree backend's CodeGen tests.
This pattern comes up a few more times in this file and probably in
the backends too but I'd prefer to fix the others separately (and
preferably when the lost-location verifier detects them).
Summary:
Currently, the comparison argument used for ATOMIC_CMP_XCHG is legalised
with GetPromotedInteger, which leaves the upper bits of the value
undefind. Since this is used for comparing in an LR/SC loop with a
full-width comparison, we must sign extend it. We introduce a new
getExtendForAtomicCmpSwapArg to complement getExtendForAtomicOps, since
many targets have compare-and-swap instructions (or pseudos) that
correctly handle an any-extend input, and the existing function
determines the extension of the result, whereas we are concerned with
the input.
This is related to https://reviews.llvm.org/D58829, which solved the
issue for ATOMIC_CMP_SWAP_WITH_SUCCESS, but not the simpler
ATOMIC_CMP_SWAP.
Reviewers: asb, lenary, efriedma
Reviewed By: asb
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, evandro, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74453
Currently, DAG combiner uses (fmul (rsqrt x) x) to estimate square
root of x. However, this method would return NaN if x is +Inf, which
is incorrect.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76853
Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
The attached test case is simplified from tcmalloc. Both function calls should be optimized as tailcall. But llvm can only optimize the first call. The second call can't be optimized because function dupRetToEnableTailCallOpts failed to duplicate ret into block case2.
There 2 problems blocked the duplication:
1 Intrinsic call llvm.assume is not handled by dupRetToEnableTailCallOpts.
2 The control flow is more complex than expected, dupRetToEnableTailCallOpts can only duplicate ret into its predecessor, but here we have an intermediate block between call and ret.
The solutions:
1 Since CodeGenPrepare is already at the end of LLVM IR phase, we can simply delete the intrinsic call to llvm.assume.
2 A general solution to the complex control flow is hard, but for this case, after exit2 is duplicated into case1, exit2 is the only successor of exit1 and exit1 is the only predecessor of exit2, so they can be combined through eliminateFallThrough. But this function is called too late, there is no more dupRetToEnableTailCallOpts after it. We can add an earlier call to eliminateFallThrough to solve it.
Differential Revision: https://reviews.llvm.org/D76539
Summary:
In method SelectionDAGBuilder::LowerStatepoint, array SI.GCTransitionArgs
is initialized from wrong part of ImmutableStatepoint class.
We copy gc args instead of transitions args.
Reviewers: reames, skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77075
When we have
```
a = G_OR x, x
```
or
```
b = G_AND y, y
```
We can drop the G_OR/G_AND and just use x/y respectively.
Also update arm64-fallback.ll because there was an or in there which hits this
transformation.
Differential Revision: https://reviews.llvm.org/D77105
Implement identity combines for operations like the following:
```
%a = G_SUB %b, 0
```
This can just be replaced with %b.
Over CTMark, this gives some minor size improvements at -O3.
Differential Revision: https://reviews.llvm.org/D76640
This reverts commit b3297ef051.
This change is incorrect. The current semantic of null in the IR is a
pointer with the bitvalue 0. It is not a cast from an integer 0, so
this should preserve the pointer type.
Summary:
This code was throwing away the opcode for a boolean, which was then
reconstructing the opcode from that boolean. Just pass the opcode, and
forget the boolean.
Reviewers: srhines
Reviewed By: srhines
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77100
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
There was already a test case for landingpads to handle this case, but I
had forgotten to consider PHI instructions preceding the EH_LABEL in the
landingpad.
PR45261
MC already knows how to emulate the .weak directive (with its ELF
semantics; i.e., an undefined weak symbol resolves to 0, and a defined
weak symbol has lower link precedence than a strong symbol of the same
name) using COFF weak externals. Plumb this through the ASM printer too,
so that definitions marked with __attribute__((weak)) at the language
level (which gets translated to weak linkage at the IR level) have the
corresponding .weak directive emitted. Note that declarations marked
with __attribute__((weak)) at the language level (which translates to
extern_weak at the IR level) already have .weak directives emitted.
Weak*/linkonce* symbols without an associated comdat (in particular, ones
generated with __attribute__((weak)) in C/C++) were earlier emitted as
normal unique globals, as the comdat is required to provide the linkonce
semantics. This change makes sure they are emitted as .weak instead,
allowing other symbols to override them.
Rename the existing coff-weak.ll test to coff-linkonce.ll. I'm not
quite sure what that test covers, since the behavior being tested in it
(the emission of a one_only section) is just a result of passing
-function-sections to llc; the linkonce_odr makes no difference.
Add a new coff-weak.ll which tests the new directive emission.
Based on an previous patch by Shoaib Meenai.
Differential Revision: https://reviews.llvm.org/D44543
When we see this:
```
%a = COPY $physreg
...
SOMETHING implicit-def $physreg
...
%b = COPY $physreg
```
The two copies are not equivalent, and so we shouldn't perform any folding
on them.
When we have two instructions which use a physical register check that they
define the same virtual register(s) as well.
e.g., if we run into this case
```
%a = COPY $physreg
...
%b = COPY %a
```
we can say that the two copies are the same, and can be folded.
Differential Revision: https://reviews.llvm.org/D76890
Make these behave the same way unsafe-fp-math and co. The command line
flag should add the attribute to functions that do not already have
it, and leave existing attributes. The attribute is the actual
implementation, but the flag is useful in some testing situations.
AMDGPU has a variety of tests with denormals enabled/disabled that
would require a painful level of test duplication without a flag. This
doesn't expose setting the separate input/output modes, or add a flag
for the f32 version yet.
Tests will be included in future patch.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary: This patch is the first effort to adding basic optimizations for FREEZE in SelDag.
Reviewers: spatel, lebedev.ri
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76707
These transforms rely on a vector reduction flag on the SDNode
set by SelectionDAGBuilder. This flag exists because SelectionDAG
can't see across basic blocks so SelectionDAGBuilder is looking
across and saving the info. X86 is the only target that uses this
flag currently. By removing the X86 code we can remove the flag
and the SelectionDAGBuilder code.
This pass adds a dedicated IR pass for X86 that looks across the
blocks and transforms the IR into a form that the X86 SelectionDAG
can finish.
An advantage of this new approach is that we can enhance it to
shrink the phi nodes and final reduction tree based on the zeroes
that we need to concatenate to bring the partially reduced
reduction back up to the original width.
Differential Revision: https://reviews.llvm.org/D76649
SUMMARY:
SUMMARY
for a source file "test.c"
void foo() {};
llc will generate assembly code as (assembly patch)
.globl foo
.globl .foo
.csect foo[DS]
foo:
.long .foo
.long TOC[TC0]
.long 0
and symbol table as (xcoff object file)
[4] m 0x00000004 .data 1 unamex foo
[5] a4 0x0000000c 0 0 SD DS 0 0
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 LD DS 0 0
After first patch, the assembly will be as
.globl foo[DS] # -- Begin function foo
.globl .foo
.align 2
.csect foo[DS]
.long .foo
.long TOC[TC0]
.long 0
and symbol table will as
[6] m 0x00000004 .data 1 extern foo
[7] a4 0x00000004 0 0 DS DS 0 0
Change the code for the assembly path and xcoff objectfile patch for llc.
Reviewers: Jason Liu
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D76162
Summary:
The existing helper function can only create a libcall to functions available in
RTLIB. Add a helper function that can create a libcall to a given function name
using the provided calling convention.
Reviewers: aditya_nandakumar, t.p.northover, rovka, arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76845
In some scalarize/split result methods (unary, binary, ...), flags in
SDNode were not passed down, which may lead to unexpected results in
unsafe float-point optimization. This patch fixes them. (maybe not
complete)
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76832
For some operations, the type is unimportant and only the number of
bits matters. For example I don't want to treat <4 x s8> as a legal
type, but I also don't want to decompose loads of this into smaller
pieces to get legal register types.
On AMDGPU in SelectionDAG, we legalize a number of operations (most
notably load and store) by coercing all types to vectors of i32. For
GlobalISel, I'm trying very hard to avoid doing this for every type,
but I don't think this strategy can be completely avoided. I'm trying
to avoid bitcasts for any legitimately legal type we can operate on,
since the intervening bitcasts have proven to be a hassle.
For loads, I think I can get away without ever casting the result
type, and handling any arbitrary bitwidth during selection (I will
eventually want new tablegen support to help with this, rather than
having to add every possible type as legal). The unmerge required to
do anything with the value should expand to the expected shifts. This
is trickier for stores, since it would now require handling a wide
array of truncates during selection which I don't want.
Future potentially interesting case are for vector indexing, where
sub-dword type should be indexed in s32 pieces.
Record the address of a tail-calling branch instruction within its call
site entry using DW_AT_call_pc. This allows a debugger to determine the
address to use when creating aritificial frames.
This creates an extra attribute + relocation at tail call sites, which
constitute 3-5% of all call sites in xnu/clang respectively.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76336
The current implementation collects all Preds/Succs of a Dep of kind Output, creating a long chain and subsequently a schedule with an unnecessarily large II.
Was this done on purpose for a reason I'm missing?
Reviewed By: bcahoon
Differential Revision: https://reviews.llvm.org/D75424
When we find something like this:
```
%a:_(s32) = G_SOMETHING ...
...
%select:_(s32) = G_SELECT %cond(s1), %a, %a
```
We can remove the select and just replace it entirely with `%a` because it's
always going to result in `%a`.
Same if we have
```
%select:_(s32) = G_SELECT %cond(s1), %a, %b
```
where we can deduce that `%a == %b`.
This implements the following cases:
- `%select:_(s32) = G_SELECT %cond(s1), %a, %a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %some_copy_from_a` -> `%a`
- `%select:_(s32) = G_SELECT %cond(s1), %a, %b` -> `%a` when `%a` and `%b`
are defined by identical instructions
This gives a few minor code size improvements on CTMark at -O3 for AArch64.
Differential Revision: https://reviews.llvm.org/D76523
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
Otherwise, the Win64 unwinder considers direct branches to such empty
trailing BBs to be a branch out of the function. It treats such a branch
as a tail call, which can only be part of an epilogue. If the unwinder
misclassifies such a branch as part of the epilogue, it will fail to
unwind the stack further. This can lead to bad stack traces, or failure
to handle exceptions properly. This is described in
https://llvm.org/PR45064#c4, and by the comment at the top of the
X86AvoidTrailingCallPass.cpp file.
It should be safe to insert int3 for such blocks. An empty trailing BB
that reaches this pass is pretty much guaranteed to be unreachable. If
a program executed such a block, it would fall off the end of the
function.
Most of the complexity in this patch comes from threading through the
"EHFuncletEntry" boolean on the MIRParser and registering the pass so we
can stop and start codegen around it. I used an MIR test because we
should teach LLVM to optimize away these branches as a follow-up.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D76531
Summary:
Add new generic MIR opcodes G_SADDSAT etc. Add support in IRTranslator
for translating the saturating add/subtract intrinsics to the new
opcodes.
Reviewers: aemerson, dsanders, paquette, arsenm
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76600
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
When decided whether to generate a post-inc load/store, look at the
other memory nodes that use the same base address and, if any proceed
the current node, then don't do the combine.
The change only seems to be affecting the Arm backend, which I was
surprised at, but it appears to fix a lot of our issues around MVE
masked load/stores having to store a temporary address after an early
post-increment on a shared base address.
Differential Revision: https://reviews.llvm.org/D75847
Extract the decision to combine into a post-inc address into a
couple of functions to make the logic more clear and re-usable.
Differential Revision: https://reviews.llvm.org/D76060
Summary:
Widening G_UNMERGE_VALUES to a type which is larger than the
original source type is the same as widening it to the same
type as the source type: in both cases, G_UNMERGE_VALUES has
to be replaced with bit arithmetic which. Although the arithmetic
itself is independent of whether the source type is smaller
or equal to the widen type, widening the source type to the
widen type should result in less artifacts being emitted,
since this is the type that the user explicitly requested.
Reviewers: arsenm, dsanders, aemerson, aditya_nandakumar
Reviewed By: arsenm, dsanders
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, volkan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76494
For folding pattern `x-(fma y,z,u*v) -> (fma -y,z,(fma -u,v,x))`, if
`yz` is 1, `uv` is -1 and `x` is -0, sign of result would be changed.
Differential Revision: https://reviews.llvm.org/D76419
Technically we can permit EXTLOAD of the LHS operand but only if all the extended bits are shifted out. Until we test coverage for that case, I'm just disabling this to fix PR45265.
-fuse-init-array is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
X86SpeculativeLoadHardeningPass::tracePredStateThroughCall can call
MCContext::createTempSymbol before TargetLoweringObjectFileELF::Initialize().
We need to call TargetLoweringObjectFileELF::Initialize() ealier.
test/CodeGen/X86/speculative-load-hardening-indirect.ll
Differential Revision: https://reviews.llvm.org/D71360
Use the advanceToLowerBound operation available on CoalescingBitVector
iterators to speed up collection of variables which reside within some
set of registers.
The speedup comes from avoiding repeated top-down traversals in
IntervalMap::find. The linear scan forward from one register interval to
the next is unlikely to be as expensive as a full IntervalMap search
starting from the root.
This reduces time spent in LiveDebugValues when compiling sqlite3 by
200ms (about 0.1% - 0.2% of the total User Time).
Depends on D76466.
rdar://60046261
Differential Revision: https://reviews.llvm.org/D76467
Avoid making a heap allocation when constructing a CoalescingBitVector.
This reduces time spent in LiveDebugValues when compiling sqlite3 by
700ms (0.5% of the total User Time).
rdar://60046261
Differential Revision: https://reviews.llvm.org/D76465
UseInitArray is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
Differential Revision: https://reviews.llvm.org/D71360
Summary:
It can be the case that a vector type is legal but the corresponding
scalar type is not legal for an architecture (i8 vs. v16i8 on AArch64).
Check if the scalar type created when folding
truncate(build_vector(x,y)) -> build_vector(truncate(x),truncate(y))
is legal if we are running after the type legalizer.
This fixes https://github.com/android/ndk/issues/1207.
Reviewers: RKSimon, srhines
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76312
Summary:
For some reason the order in which we call getNegatedExpression
for the involved operands, after a call to isCheaperToUseNegatedFPOps,
seem to matter. This patch includes a new test case in
test/CodeGen/X86/fdiv.ll that crashes if we reverse the order of
those calls. Before this patch that could happen depending on
which compiler that were used when buildind llvm. With my GCC
version (7.4.0) I got the crash, because it seems like it is
using a different order for the argument evaluation compared
to clang.
All other users of isCheaperToUseNegatedFPOps already used this
pattern with unfolded/ordered calls to getNegatedExpression, so
this patch is aligning visitFDIV with the other use cases.
This patch simply deals with the non-determinism for FDIV. While
the underlying problem with getNegatedExpression is discussed
further in D76439.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76319
This reverts commit e9f22fd429.
When building with -DLLVM_USE_SANITIZER="Thread", check-llvm has 70
failing tests with this revision, and 29 without this revision.
Port over the following:
- shuffle undef, undef, any_mask -> undef
- shuffle anything, anything, undef_mask -> undef
This sort of thing shows up a lot when you try to bugpoint code containing
shufflevector.
Differential Revision: https://reviews.llvm.org/D76382
Summary:
* Remove a bunch of asserts checking for unsupported scalable types and
add some more now that they are supported.
* Propagate the scalable flag where necessary.
* Add another `EVT::getExtendedVectorVT` method that takes an
ElementCount parameter.
* Add `EVT::isExtendedScalableVector` and
`EVT::getExtendedVectorElementCount` - latter is currently unused.
Reviewers: sdesmalen, efriedma, rengolin, craig.topper, huntergr
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75672
Summary:
Related to D75672, this patch adds EVT::isFixedLengthVector to determine
if the underlying vector type is of fixed length.
An assert is introduced in EVT::getVectorNumElements that triggers for
types that aren't fixed length. This is currently guarded by a flag
added D75297 that is off by default and has been renamed to the more
generic ENABLE_STRICT_FIXED_SIZE_VECTORS.
Ideally we want to get rid of getVectorNumElements but a quick grep
shows there are >350 uses in lib/CodeGen and 75 in lib/Target/AArch64
alone. All of these probably aren't EVT::getVectorNumElements (some may
be the MVT equivalent), but there are many places to fixup and having
the assert on by default would make the SVE upstreaming effort
difficult.
Reviewers: sdesmalen, efriedma, ctetreau, huntergr, rengolin
Reviewed By: efriedma
Subscribers: mgorny, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76376
Gather/scatter don't access one memory location, they access multiple disjoint locations. So using a fixed size isn't accurate. But we don't have a way to represent the true behavior so just use UnknownSize.
Previously we "split" the memory VT and use that size for the MMO of each half. But the memory VT is scalar so splitting usually just returned the original scalar VT, but on 32-bit X86 if the scalar VT was i64 it probably returned i32?
Differential Revision: https://reviews.llvm.org/D76388
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
SelectionDAG CSEs nodes based on their result type and operands, but not their flags. The flags are expected to be intersected when they are CSEd. In SelectionDAGBuilder, for FP nodes we manage both the fast math flags and the nofpexcept flag after the nodes have already been CSEd when they were created with getNode. The management of the fastmath flags before the constrained nodes prevents the nofpexcept management from working correctly.
This commit moves the FMF handling for constrained intrinsics into their visitor and disables the common FMF handling for these nodes.
Differential Revision: https://reviews.llvm.org/D75224
This patch generates TableGen descriptions for the specified register
banks which contain a list of register sizes corresponding to the
available HwModes. The appropriate size is used during codegen according
to the current HwMode. As this HwMode was not available on generation,
it is set upon construction of the RegisterBankInfo class. Targets
simply need to provide the HwMode argument to the
<target>GenRegisterBankInfo constructor.
The RISC-V RegisterBankInfo constructor has been updated accordingly
(plus an unused argument removed).
Differential Revision: https://reviews.llvm.org/D76007
This ports some combines from DAGCombiner.cpp which perform some trivial
transformations on instructions with undef operands.
Not having these can make it extremely annoying to find out where we differ
from SelectionDAG by looking at existing lit tests. Without them, we tend to
produce pretty bad code generation when we run into instructions which use
undef operands.
Also remove the nonpow2_store_narrowing testcase from arm64-fallback.ll, since
we no longer fall back on the add.
Differential Revision: https://reviews.llvm.org/D76339
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76348
Skip debug instructions before calling functions not expecting them.
In particular, LIS.getInstructionIndex(*mi) would fail if mi was a debg instr.
Differential Revision: https://reviews.llvm.org/D76129
If it is a*b-c*d, it could be also folded into fma(a, b, -c*d) or fma(-c, d, a*b).
This patch is trying to respect the uses of a*b and c*d to make the best choice.
Differential Revision: https://reviews.llvm.org/D75982
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
When compiling
```
struct S {
float w;
};
void f(long w, long b);
void g(struct S s) {
int w = s.w;
f(w, w*4);
}
```
I get Assertion failed: ((!CombinedExpr || CombinedExpr->isValid()) && "Combined debug expression is invalid").
That's because we combine two epxressions that both end in DW_OP_stack_value:
```
(lldb) p Expr->dump()
!DIExpression(DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p Param.Expr->dump()
!DIExpression(DW_OP_constu, 4, DW_OP_mul, DW_OP_LLVM_convert, 32, DW_ATE_signed, DW_OP_LLVM_convert, 64, DW_ATE_signed, DW_OP_stack_value)
(lldb) p CombinedExpr->isValid()
(bool) $0 = false
(lldb) p CombinedExpr->dump()
!DIExpression(4097, 32, 5, 4097, 64, 5, 16, 4, 30, 4097, 32, 5, 4097, 64, 5, 159, 159)
```
I believe that in this particular case combining two stack values is
safe, but I didn't want to sink the special handling into
DIExpression::append() because I do want everyone to think about what
they are doing.
Patch by Adrian Prantl.
Fixes PR45181.
rdar://problem/60383095
Differential Revision: https://reviews.llvm.org/D76164
RDF is designed to be target agnostic. Therefore it would be useful to have it available for other targets, such as X86.
Based on a previous patch by Krzysztof Parzyszek
Differential Revision: https://reviews.llvm.org/D75932
I believe we were previously calculating a pointer info with the scalar base and an offset of 0. But that's not really where the gather is pointing. The offset is a function of the indices of the GEP we looked through.
Also set the size of the MachineMemOperand to UnknownSize
Differential Revision: https://reviews.llvm.org/D76157
Summary: The following change is to allow the machine outlining can be applied for Nth times, where N is specified by the compiler option. By default the value of N is 1. The motivation is that the repeated machine outlining can further reduce code size. Please refer to the presentation "Improving Swift Binary Size via Link Time Optimization" in LLVM Developers' Meeting in 2019.
Reviewers: aschwaighofer, tellenbach, paquette
Reviewed By: paquette
Subscribers: tellenbach, hiraditya, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71027
Under certain circumstances we'll end up in the position where the negated shift amount will get truncated to the type specified getScalarShiftAmountTy(), so we need to test for a truncated version of the shift amount as well.
This allows us to remove half of the remaining patterns tested for by X86ISelLowering's combineOrShiftToFunnelShift.
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
With -fstack-protector-strong we check if a non-array variable has its address
taken in a way that could cause a potential out-of-bounds access. However what
we don't catch is when the address is directly used to create an out-of-bounds
memory access.
Fix this by examining the offsets of GEPs that are ultimately derived from
allocas and checking if the resulting address is out-of-bounds, and by checking
that any memory operations using such addresses are not over-large.
Fixes PR43478.
Differential revision: https://reviews.llvm.org/D75695
This is the second patch in a series of patches to enable basic block
sections support.
This patch adds support for:
* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.
Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
I used the implementation for floor instead of round. It also turns
out the OpenCL builtin library wasn't using the round builtin, but
implemented the expanded form.
Summary:
This is a part of the series of efforts for correcting alignment of memory operations.
(Another related bugs: https://bugs.llvm.org/show_bug.cgi?id=44388 , https://bugs.llvm.org/show_bug.cgi?id=44543 )
This fixes https://bugs.llvm.org/show_bug.cgi?id=43880 by giving default alignment of loads to 1.
The test CodeGen/AArch64/bcmp-inline-small.ll should have been changed; it was introduced by https://reviews.llvm.org/D64805 . I talked with @evandro, and confirmed that the test is okay to be changed.
Other two tests from PowerPC needed changes as well, but fixes were straightforward.
Reviewers: courbet
Reviewed By: courbet
Subscribers: nlopes, gchatelet, wuzish, nemanjai, kristof.beyls, hiraditya, steven.zhang, danielkiss, llvm-commits, evandro
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76113
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not frozen, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Followup to D75114, this patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have variable shift amounts, matched with MatchFunnelPosNeg which acts in an (almost) equivalent manner to MatchRotatePosNeg.
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not freezed, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple patch that expands https://reviews.llvm.org/D75859 to pointer comparison and fcmp
Checked with Alive2
Reviewers: reames, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76048
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
Summary:
Using the default DAG.UnrollVectorOp on v16i8 and v8i16 vectors
results in i8 or i16 nodes being inserted into the SelectionDAG. Since
those are illegal types, this causes a legalization assertion failure
for some code patterns, as uncovered by PR45178. This change unrolls
shifts manually to avoid this issue by adding and using a new optional
EVT argument to DAG.ExtractVectorElements to control the type of the
extract_element nodes.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76043
Summary:
This patch adds the following intrinsics for non-temporal gather loads
and scatter stores:
* aarch64_sve_ldnt1_gather_index
* aarch64_sve_stnt1_scatter_index
These intrinsics implement the "scalar + vector of indices" addressing
mode.
As opposed to regular and first-faulting gathers/scatters, there's no
instruction that would take indices and then scale them. Instead, the
indices for non-temporal gathers/scatters are scaled before the
intrinsics are lowered to `ldnt1` instructions.
The new ISD nodes, GLDNT1_INDEX and SSTNT1_INDEX, are only used as
placeholders so that we can easily identify the cases implemented in
this patch in performGatherLoadCombine and performScatterStoreCombined.
Once encountered, they are replaced with:
* GLDNT1_INDEX -> SPLAT_VECTOR + SHL + GLDNT1
* SSTNT1_INDEX -> SPLAT_VECTOR + SHL + SSTNT1
The patterns for lowering ISD::SHL for scalable vectors (required by
this patch) were missing, so these are added too.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D75601
Summary: When narrowing a scalar G_EXTRACT where the destination lines up perfectly with a single result of the emitted G_UNMERGE_VALUES a COPY should be emitted instead of unconditionally trying to emit a G_MERGE_VALUES.
Reviewers: arsenm, dsanders
Reviewed By: arsenm
Subscribers: wdng, rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75743
This is a reimplementation of the optimization removed in D75964. The actual spill/fill optimization is handled by D76013, this one just worries about reducing the stackmap section size itself by eliminating redundant entries. As noted in the comments, we could go a lot further here, but avoiding the degenerate invoke case as we did before is probably "enough" in practice.
Differential Revision: https://reviews.llvm.org/D76021
Summary:
callbr's indirect branches aren't expected to be taken, so reduce their
probabilities to 0 while increasing the default destination to 1. This
allows some code improvements through block placement.
Reviewers: nickdesaulniers
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72656
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
This is part of PR44213 https://bugs.llvm.org/show_bug.cgi?id=44213
When importing (system) Clang modules, LLDB needs to know which SDK
(e.g., MacOSX, iPhoneSimulator, ...) they came from. While the sysroot
attribute contains the absolute path to the SDK, this doesn't work
well when the debugger is run on a different machine than the
compiler, and the SDKs are installed in different directories. It thus
makes sense to just store the name of the SDK instead of the absolute
path, so it can be found relative to LLDB.
rdar://problem/51645582
Differential Revision: https://reviews.llvm.org/D75646
Summary:
The change is to fix conflict value for metadata "Objective-C Garbage Collection" in the mix of swift and Objective-C bitcode.
The purpose is to provide the support of LTO for swift and Objective-C mixed project.
Reviewers: rjmccall, ahatanak, steven_wu
Reviewed By: rjmccall, steven_wu
Subscribers: manmanren, mehdi_amini, hiraditya, dexonsmith, llvm-commits, jinlin
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71219
We just removed a broken duplicate elimination algorithm in D75964, and after landed that it occurred to me that duplicate elimination is simply CSE. SelectionDAG has a build in CSE, so why wasn't that triggering? Well, it turns out we were overly conservative in the memory states for our reloads and CSE (rightly) considers the incoming memory state for a load part of the identity of the load.
By loosening the chain and allowing reordering, we also allow CSE. As shown in the test case, doing iterative CSE as we go is enough to eliminate duplicate stores in later statepoints as well. We key our (block local) slot map by SDValue, so commoning a previous pair of loads at construction time means we also common following stores.
Differential Revision: https://reviews.llvm.org/D76013
This patch reuses the existing MatchRotate ROTL/ROTR rotation pattern code to also recognize the more general FSHL/FSHR funnel shift patterns when we have constant shift amounts.
Differential Revision: https://reviews.llvm.org/D75114
Summary:
This patch helps CodeGenPrepare move freeze into the icmp when it is used by branch.
It reenables generation of efficient conditional jumps.
This is only done when at least one of icmp's operands is constant to prevent the transformation from increasing # of freeze instructions.
Performance degradation of MultiSource/Benchmarks/Ptrdist/yacr2/yacr2.test is resolved with this patch.
Checked with Alive2
Reviewers: reames, fhahn, nlopes
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75859
A downstream test case (see included reduced test) revealed that we have a bug in how we handle duplicate relocations. If we have the same SDValue relocated twice, and that value happens to be a constant (such as null), we only export one of the two llvm::Values. Exporting on a per llvm::Value basis is required to allow lowering of gc.relocates in following basic blocks (e.g. invokes). Without it, we end up with a use of an undefined vreg and bad things happen.
Rather than fixing the optimization - which appears to be hard - I propose we simply remove it. There are no tests in tree that change with this code removed. If we find out later that this did matter for something, we can reimplement a variation of this in CodeGenPrepare to catch the easy cases without complicating the lowering code.
Thanks to Denis and Serguei who did all the hard work of figuring out what went wrong here. The patch is by far the easy part. :)
Differential Revision: https://reviews.llvm.org/D75964
If the loaded memory size was smaller than the result size, this would
produce out of bounds memory accesses. I'm wondering if we need a
distinct narrow memory legalize action type, since a case I care about
is decomposing a 4-byte unaligned access into 4 extending loads, which
would leave the original result register type. I'm currently awkwardly
using narrowScalar to handle unaligned accesses that need to be split.
Summary:
This patch extends the TargetMachine to let targets specify the integer size
used by the sjljehprepare pass. This is 64bit for the VE target and otherwise
defaults to 32bit for all targets, which was hard-wired before.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71337
When hashing on MachineOperand::MO_ConstantPoolIndex, now MIR-Canon and
MIRVRegNamer will no longer result in a hash collision.
Differential Revision: https://reviews.llvm.org/D74449
This allows Spiller.h to be used and included outside of
the lib/CodeGen directory. For example to be used in the
lib/Target directory or other places.
This reverts commit 5583c2f2fb.
The lldb bot failure was a test that was fragile and sensitive to irrelevant
changes in instruction ordering. Re-committing this as the test should have
been skipped for AArch64 now.
Differential Revision: https://reviews.llvm.org/D75555
Handle LinkOnceODRLinkage;
Handle AppendingLinkage type for llvm.global_ctors/dtors static init global arrays;
Differential Revision: https://reviews.llvm.org/D75305
As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
Summary:
This performs better for sample PGO.
NFC as PGSOColdCodeOnlyForSamplePGO is still true.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75550
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
As the test case shows if there is an ExtractValueInst in the Ret block, function dupRetToEnableTailCallOpts can't duplicate it into the block containing call. So later no tail call is generated in CodeGen.
This patch adds the ExtractValueInst handling code in function dupRetToEnableTailCallOpts and FoldReturnIntoUncondBranch, and later tail call can be generated for this case.
Differential Revision: https://reviews.llvm.org/D74242
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
This changes the localizer to attempt intra-block localizer of instructions
that have local uses. This is useful because sometimes the entry block itself
has many uses of constant-like instructions, which would benefit from shortening
live ranges. Previously if an inst had no non-local uses, we wouldn't add it to
the list of instructions to attempt further intra-block localization.
This gives a 0.7% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D75555
Summary:
This change checks for the return type in the frontend and adds a flag
to the DISubroutineType to indicate that the option should be added in
CodeViewDebug.
Previously function types sometimes appeared twice in the PDB: once with
"returns cxx udt" and once without.
See https://bugs.llvm.org/show_bug.cgi?id=44785.
Reviewers: rnk, asmith
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75215
This fixes a miscompile that happened because a DBG_VALUE interfered
with the MachineOutliner's liveness analysis.
Inserting a DBG_VALUE after a terminator breaks predicates on MBB such
as isReturnBlock(). And the resulting DBG_VALUE cannot be "live".
I plan to introduce a MachineVerifier check for this situation in a
follow up.
rdar://59859175
Testing: check-llvm, LNT build with a stage2 compiler & entry values
enabled
Differential Revision: https://reviews.llvm.org/D75548
```
// clang -c -gdwarf-5 a.s -o a.o
.section .init; ret
.text; ret
```
.debug_info contains DW_AT_ranges and llvm-dwarfdump will report
a verification error because .debug_rnglists does not exist (not
implemented).
This patch generates .debug_rnglists for assembly files.
emitListsTableHeaderStart() in DwarfDebug.cpp can be shared with
MCDwarf.cpp. Because CodeGen depends on MC, I move the function to
MCDwarf.cpp
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D75375
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
In RDA, check against the already decided dead instructions when
looking at users. This allows an instruction to be removed if it
has multiple users, but they're all dead.
This means that IT instructions can be considered killed once all
the itstate using instructions are dead.
Differential Revision: https://reviews.llvm.org/D75245
This patch adds support for dwarf emission/dumping part of debuginfo
generation for defaulted parameters.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
Make it a compile-time error to pass an int/unsigned/etc to
fromRawInteger.
Hopefully this prevents errors of the form:
```
for (unsigned ID : getVarLocs()) {
auto VL = LocMap[LocIndex::fromRawInteger(ID)];
...
```
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
This is needed for D74873, AMDGPU going to have 16 bit subregs
and the largest tuple is 32 VGPRs, which results in 64 lanes.
Differential Revision: https://reviews.llvm.org/D75378
We should be careful to allow count of re-materialization of operands to be less
then number of physical registers.
STATEPOINT instruction has a variable number of operands and potentially very big.
So re-materialization for all operands is disabled at the moment if restrict-statepoint-remat is true.
The patch relaxes the re-materialization restriction for STATEPOINT instruction allowing it for
fixed operands. Specifically it is about call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits, qcolombet, hiraditya
Differential Revision: https://reviews.llvm.org/D75335
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
Try again with an up-to-date version of D69471 (99317124 was a stale
revision).
---
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
As a narrow stopgap for the assertion failure described in PR45025, add
a describeLoadedValue override to ARMBaseInstrInfo and use it to detect
copies in which the forwarding reg is a super/sub reg of the copy
destination. For the moment this is unsupported.
Several follow ups are possible:
1) Handle VORRq. At the moment, we do not, because isCopyInstrImpl
returns early when !MI.isMoveReg().
2) In the case where forwarding reg is a super-reg of the copy
destination, we should be able to describe the forwarding reg as a
subreg within the copy destination. I'm not 100% sure about this, but
it looks like that's what's done in AArch64InstrInfo.
3) In the case where the forwarding reg is a sub-reg of the copy
destination, maybe we could describe the forwarding reg using the
copy destinaion and a DW_OP_LLVM_fragment (I guess this should be
possible after D75036).
https://bugs.llvm.org/show_bug.cgi?id=45025
rdar://59772698
Differential Revision: https://reviews.llvm.org/D75273
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
Way back in D24994, the combination of LexicalScopes::dominates and
LiveDebugValues was identified as having worst-case quadratic complexity,
but it wasn't triggered by any code path at the time. I've since run into a
scenario where this occurs, in a very large basic block where large numbers
of inlined DBG_VALUEs are present.
The quadratic-ness comes from LiveDebugValues::join calling "dominates" on
every variable location, and LexicalScopes::dominates potentially touching
every instruction in a block to test for the presence of a scope. We have,
however, already computed the presence of scopes in blocks, in the
"InstrRanges" of each scope. This patch switches the dominates method to
examine whether a block is present in a scope's InsnRanges, avoiding
walking through the whole block.
At the same time, fix getMachineBasicBlocks to account for the fact that
InsnRanges can cover multiple blocks, and add some unit tests, as Lexical
Scopes didn't have any.
Differential revision: https://reviews.llvm.org/D73725
Ensure that we're recording implicit defs, as well as visiting implicit
uses and implicit defs when we're walking through operands.
Differential Revision: https://reviews.llvm.org/D75185
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
This is part 3 of a 3-part series to address a compile-time explosion
issue in LiveDebugValues.
---
Start encoding register locations within VarLoc IDs, and take advantage
of this encoding to speed up transferRegisterDef.
There is no fundamental algorithmic change: this patch simply swaps out
SparseBitVector in favor of CoalescingBitVector. That changes iteration
order (hence the test updates), but otherwise this patch is NFCI.
The only interesting change is in transferRegisterDef. Instead of doing:
```
KillSet = {}
for (ID : OpenRanges.getVarLocs())
if (DeadRegs.count(ID))
KillSet.add(ID)
```
We now do:
```
KillSet = {}
for (Reg : DeadRegs)
for (ID : intervalsReservedForReg(Reg, OpenRanges.getVarLocs()))
KillSet.add(ID)
```
By not visiting each open location every time we visit an instruction,
this eliminates some potentially quadratic behavior. The new
implementation basically does a constant amount of work per instruction
because the interval map lookups are very fast.
For a file in WebKit, this brings the time spent in LiveDebugValues down
from ~2.5 minutes to 4 seconds, reducing compile time spent in that pass
from 28% of the total to just over 1%.
Before:
```
2.49 min 27.8% 0 s LiveDebugValues::process
2.41 min 27.0% 5.40 s LiveDebugValues::transferRegisterDef
1.51 min 16.9% 1.51 min LiveDebugValues::VarLoc::isDescribedByReg() const
32.73 s 6.1% 8.70 s llvm::SparseBitVector<128u>::SparseBitVectorIterator::operator++()
```
After:
```
4.53 s 1.1% 0 s LiveDebugValues::process
3.00 s 0.7% 107.00 ms LiveDebugValues::transferRegisterCopy
892.00 ms 0.2% 406.00 ms LiveDebugValues::transferSpillOrRestoreInst
404.00 ms 0.1% 32.00 ms LiveDebugValues::transferRegisterDef
110.00 ms 0.0% 2.00 ms LiveDebugValues::getUsedRegs
57.00 ms 0.0% 1.00 ms std::__1::vector<>::push_back
40.00 ms 0.0% 1.00 ms llvm::CoalescingBitVector<>::find(unsigned long long)
```
FWIW, I tried the same approach using SparseBitVector, but got bad
results. To do that, I had to extend SparseBitVector to support 64-bit
indices and expose its lower bound operation. The problem with this is
that the performance is very hard to predict: SparseBitVector's lower
bound operation falls back to O(n) linear scans in a std::list if you're
not /very/ careful about managing iteration order. When I profiled this
the performance looked worse than the baseline.
You can see the full CoalescingBitVector-based implementation here:
https://github.com/vedantk/llvm-project/commits/try-coalescing
You can see the full SparseBitVector-based implementation here:
https://github.com/vedantk/llvm-project/commits/try-sparsebitvec-find
Depends on D74984 and D74985.
Differential Revision: https://reviews.llvm.org/D74986
This is part 2 of a 3-part series to address a compile-time explosion
issue in LiveDebugValues.
---
Each VarLoc has a unique ID: this ID is used to look up a VarLoc in the
VarLocMap, and to virtually insert a VarLoc into a VarLocSet. Instead of
inserting the VarLoc /itself/ into the VarLocSet, we insert just the ID,
because this can be represented efficiently with a SparseBitVector.
This change introduces LocIndex, a layer of abstraction on top of VarLoc
IDs. Prior to this change, an ID was just an index into a vector. With
this change, an ID encodes both an index /and/ a register location. The
type-checker ensures that conversions to and from LocIndex are correct.
For the moment the register location is always 0 (undef). We have plenty
of bits left over to encode physregs, stack slots, and other locations
in the future.
Differential Revision: https://reviews.llvm.org/D74985
The code changes here are hopefully straightforward:
1. Use MachineInstruction flags to decide if FP ops can be reassociated
(use both "reassoc" and "nsz" to be consistent with IR transforms;
we probably don't need "nsz", but that's a safer interpretation of
the FMF).
2. Check that both nodes allow reassociation to change instructions.
This is a stronger requirement than we've usually implemented in
IR/DAG, but this is needed to solve the motivating bug (see below),
and it seems unlikely to impede optimization at this late stage.
3. Intersect/propagate MachineIR flags to enable further reassociation
in MachineCombiner.
We managed to make MachineCombiner flexible enough that no changes are
needed to that pass itself. So this patch should only affect x86
(assuming no other targets have implemented the hooks using MachineIR
flags yet).
The motivating example in PR43609 is another case of fast-math transforms
interacting badly with special FP ops created during lowering:
https://bugs.llvm.org/show_bug.cgi?id=43609
The special fadd ops used for converting int to FP assume that they will
not be altered, so those are created without FMF.
However, the MachineCombiner pass was being enabled for FP ops using the
global/function-level TargetOption for "UnsafeFPMath". We managed to run
instruction/node-level FMF all the way down to MachineIR sometime in the
last 1-2 years though, so we can do better now.
The test diffs require some explanation:
1. llvm/test/CodeGen/X86/fmf-flags.ll - no target option for unsafe math was
specified here, so MachineCombiner kicks in where it did not previously;
to make it behave consistently, we need to specify a CPU schedule model,
so use the default model, and there are no code diffs.
2. llvm/test/CodeGen/X86/machine-combiner.ll - replace the target option for
unsafe math with the equivalent IR-level flags, and there are no code diffs;
we can't remove the NaN/nsz options because those are still used to drive
x86 fmin/fmax codegen (special SDAG opcodes).
3. llvm/test/CodeGen/X86/pow.ll - similar to #1
4. llvm/test/CodeGen/X86/sqrt-fastmath.ll - similar to #1, but MachineCombiner
does some reassociation of the estimate sequence ops; presumably these are
perf wins based on latency/throughput (and we get some reduction of move
instructions too); I'm not sure how it affects numerical accuracy, but the
test reflects reality better now because we would expect MachineCombiner to
be enabled if the IR was generated via something like "-ffast-math" with clang.
5. llvm/test/CodeGen/X86/vec_int_to_fp.ll - this is the test added to model PR43609;
the fadds are not reassociated now, so we should get the expected results.
6. llvm/test/CodeGen/X86/vector-reduce-fadd-fast.ll - similar to #1
7. llvm/test/CodeGen/X86/vector-reduce-fmul-fast.ll - similar to #1
Differential Revision: https://reviews.llvm.org/D74851
This will address the issue: P8198 and P8199 (from D73534).
The methods was not handle bundles properly.
Differential Revision: https://reviews.llvm.org/D74904
Summary:
If the describeLoadedValue() hook produced a DIExpression when
describing a instruction, and it was not possible to emit a call site
entry directly (the value operand was not an immediate nor a preserved
register), then that described value could not be inserted into the
worklist, and would instead be dropped, meaning that the parameter's
call site value couldn't be described.
This patch extends the worklist so that each entry has an DIExpression
that is built up when iterating through the instructions.
This allows us to describe instruction chains like this:
$reg0 = mv $fp
$reg0 = add $reg0, offset
call @call_with_offseted_fp
Since DW_OP_LLVM_entry_value operations can't be combined with any other
expression, such call site entries will not be emitted. I have added a
test, dbgcall-site-expr-entry-value.mir, which verifies that we don't
assert or emit broken DWARF in such cases.
Reviewers: djtodoro, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75036
Summary:
This is a preparatory patch for D75036, in which a debug expression is
associated with each parameter register in the worklist. In that patch
the two lambda functions addToWorklist() and finishCallSiteParams() grow
a bit, so move those out to separate functions. This patch also prepares
for each parameter register having their own expression moving the
creation of the DbgValueLoc into finishCallSiteParams().
Reviewers: djtodoro, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D75050
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
Add getUniqueReachingMIDef to RDA which performs a global search for
a machine instruction that produces a unique definition of a given
register at a given point. Also add two helper functions
(getMIOperand) that wrap around this functionality to get the
incoming definition uses of a given instruction. These now replace
the uses of getReachingMIDef in ARMLowOverheadLoops. getReachingMIDef
has been renamed to getReachingLocalMIDef and has been made private
along with getInstFromId.
Differential Revision: https://reviews.llvm.org/D74605
Only MCAsmStreamer (assembly output) needs to keep names of temporary labels created by
MCContext::createTempSymbol().
This change made the rL236642 optimization available for cc2as and
probably some other users.
This eliminates a behavior difference between llvm-mc -filetype=obj and cc1as, which caused
https://reviews.llvm.org/D74006#1890487
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75097
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Unlike what I claimed in my previous commit. The caching is
actually not NFC on PHIs.
When we put a big enough max depth, we end up simulating loops.
The cache is effectively cutting the simulation short and we
get less information as a result.
E.g.,
```
v0 = G_CONSTANT i8 0xC0
jump
v1 = G_PHI i8 v0, v2
v2 = G_LSHR i8 v1, 1
```
Let say we want the known bits of v1.
- With cache:
Set v1 cache to we know nothing
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is in the cache
=> v1 is 0, thus v2 is 0x80
Finally v1 is v0 & v2 => 0x80
- Without cache and enough depth to do two iteration of the loop:
v1 is v0 & v2
v0 gives us 0xC0
v2 gives us known bits of v1 >> 1
v1 is v0 & v2
v0 is 0xC0
v2 is v1 >> 1
Reach the max depth for v1...
unwinding
v1 is know nothing
v2 is 0x80
v0 is 0xC0
v1 is 0x80
v2 is 0xC0
v0 is 0xC0
v1 is 0xC0
Thus now v1 is 0xC0 instead of 0x80.
I've added a unittest demonstrating that.
NFC
Add a dump method that recursively prints an instruction and all
the instructions defining its operands and so on.
This is helpful when looking at combiner issue.
NFC
Differential Revision: https://reviews.llvm.org/D75094
MachineVerifier still takes 45-50% of total compile time with
-verify-machineinstrs, with calcRegsPassed dataflow taking ~50-60% of
MachineVerifier.
The majority of that time is spent in BBInfo::addPassed, mostly within
DenseSet implementing the sets the dataflow is operating over.
In particular, 1/4 of that DenseSet time is spent just iterating over it
(operator++), 40-50% on insertions, and most of the rest in ::count.
Given that, we're implementing custom sets just for this analysis here,
focusing on cheap insertions and O(n) iteration time (as opposed to
O(U), where U is the universe).
As it's based _mostly_ on BitVector for sparse and SmallVector for
dense, it may remotely resemble SparseSet. The difference is, our
solution is a lot less clever, doesn't have constant time `clear` that
we won't use anyway as reusing these sets across analyses is cumbersome,
and thus more space efficient and safer (got a resizable Universe and a
fallback to DenseSet for sparse if it gets too big).
With this patch MachineVerifier gets ~15-20% faster, its contribution to
total compile time drops from 45-50% to ~35%, while contribution of
calcRegsPassed to MachineVerifier drops from 50-60% to ~35% as well.
calcRegsPassed itself gets another 2x faster here.
All measured on a large suite of shaders targeting a number of GPUs.
Reviewers: bogner, stoklund, rudkx, qcolombet
Reviewed By: rudkx
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75033
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
Changes the handling of odd breakdowns, and avoids using
G_EXTRACT/G_INSERT. Pad with undef to a wider size, and unmerge. Also
avoid introducing instructions for the fully undef components.
Depending on the target, test suite, pipeline config and perhaps other
factors machine verifier when forced on with -verify-machineinstrs can
increase compile time 2-2.5 times over (Release, Asserts On), taking up
~60% of the time. An invaluable tool, it significantly slows down
machine verifier-enabled testing.
Nearly 75% of its time MachineVerifier spends in the calcRegsPassed
method. It's a classic forward dataflow analysis executed over sets, but
visiting MBBs in arbitrary order. We switch that to RPO here.
This speeds up MachineVerifier by about 35%, decreasing the overall
compile time with -verify-machineinstrs by 20-25% or so.
calcRegsPassed itself gets 2x faster here.
All measured on a large suite of shaders targeting a number of GPUs.
Reviewers: bogner, stoklund, rudkx, qcolombet
Reviewed By: bogner
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75032
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
Change the way that we remove the redundant iteration count code in
the presence of IT blocks. collectLocalKilledOperands has been
introduced to scan an instructions operands, collecting the killed
instructions and then visiting them too. This is used to delete the
code in the preheader which calculates the iteration count. We also
track any IT blocks within the preheader and, if we remove all the
instructions from the IT block, we also remove the IT instruction.
isSafeToRemove is used to remove any redundant uses of the iteration
count within the loop body.
Differential Revision: https://reviews.llvm.org/D74975
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
Summary:
The type used to represent functional units in MC is
'unsigned', which is 32 bits wide. This is currently
not a problem in any upstream target as no one seems
to have hit the limit on this yet, but in our
downstream one, we need to define more than 32
functional units.
Increasing the size does not seem to cause a huge
size increase in the binary (an llc debug build went
from 1366497672 to 1366523984, a difference of 26k),
so perhaps it would be acceptable to have this patch
applied upstream as well.
Subscribers: hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71210
This version fixes a buildbot failure cause by picking the wrong insert
point for XORs. We cannot pick the XOR binary operator as insert point,
as it is not guaranteed that both input operands for the overflow
intrinsic are defined before it.
This reverts the revert commit
c7fc0e5da6.
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
This patch adds a cache that is valid only for the duration of a call
to getKnownBits. With such short lived cache we avoid all the problems
of cache invalidation while still getting the benefits of reusing
the information we already computed.
This cache is useful whenever an instruction occurs more than once
in a chain of computation.
E.g.,
v0 = G_ADD v1, v2
v3 = G_ADD v0, v1
Previously we would compute the known bits for:
v1, v2, v0, then v1 again and finally v3.
With the patch, now we won't have to recompute v1 again.
NFC
Summary:
This prevents BFI queries on new blocks (from
MachineSinking::GetAllSortedSuccessors) and fixes a bunch of assert failures
under -check-bfi-unknown-block-queries=true.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74511
This changes the SimplifyLibCalls utility to accept an IRBuilderBase,
which allows us to pass through the IRBuilder used by InstCombine.
This will ensure that new instructions get added to the worklist.
The annotated test-case drops from 4 to 2 InstCombine iterations thanks
to this.
To achieve this, I'm adding an IRBuilderBase::OperandBundlesGuard,
which is basically the same as the existing InsertPointGuard and
FastMathFlagsGuard, but for operand bundles. Also add a
setDefaultOperandBundles() method so these can be set outside the
constructor.
Differential Revision: https://reviews.llvm.org/D74792
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
I believe this was carried over from getELFKindForNamedSection since
the wasm backend originally used ELF object writing as a template.
Differential Revision: https://reviews.llvm.org/D74565
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
When analyzing PHIs, we gather the known bits for every operand and
merge them together to get the known bits of the result of the PHI.
It is not unusual that merging the information leads to know nothing
on the result (e.g., phi a: i8 3, b: i8 unknown, ..., after looking at the
second argument we know we will know nothing on the result), thus, as
soon as we reach that state, stop analyzing the following operand (i.e.,
on the previous example, we won't process anything after looking at `b`).
This improves compile time in particular with PHIs with a large number
of operands.
NFC.
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
Summary:
If the programmer adds static profile data to a branch---i.e. uses
"__builtin_expect()" or similar---then we should honor it. Otherwise,
"__builtin_expect()" is ignored in crucial situations. So we trust that
the programmer knows what they're doing until proven wrong.
Subscribers: hiraditya, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74809
Instcombine folds (a + b <u a) to (a ^ -1 <u b) and that does not match
the expected pattern in CodeGenPerpare via UAddWithOverflow.
This causes a regression over Clang 7 on both X86 and AArch64:
https://gcc.godbolt.org/z/juhXYV
This patch extends UAddWithOverflow to also catch the XOR case, if the
XOR is only used in the ICMP. This covers just a single case, but I'd
like to make sure I am not missing anything before tackling the other
cases.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: nikic, lebedev.ri
Differential Revision: https://reviews.llvm.org/D74228
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
https://reviews.llvm.org/D67133
While investigating some non determinism (CSE doesn't produce wrong
code, it just doesn't CSE some times) in GISel CSE on an out of tree
target, I realized that the core issue was that there were lots of code
that mutates (setReg, setRegClass etc), but doesn't notify observers
(CSE in this case but this could be any other observer). In order to
make the Observer be available in various parts of code and to avoid
having to thread it through various API, the MachineFunction now has the
observer as field. This allows it to be easily used in helper functions
such as constrainOperandRegClass.
Also added some invariant verification method in CSEInfo which can
catch these issues (when CSE is enabled).
Summary:
Unlike normal calls, call_indirects have immediate arguments that
caused a MachineVerifier failure without a small tweak to loosen the
verifier's requirements for variadicOpsAreDefs instructions.
One nice thing about the new call_indirects is that they do not need
to participate in the PCALL_INDIRECT mechanism because their post-isel
hook handles moving the function pointer argument and adding the flags
and typeindex arguments itself.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74191
This reverts commit 649aba93a2, now that
the approach started there has been shown to be workable in the patch
series culminating in https://reviews.llvm.org/D74192.
Summary:
Making `Scale` a `TypeSize` in AArch64InstrInfo::getMemOpInfo,
has the effect that all places where this information is used
(notably, TargetInstrInfo::getMemOperandWithOffset) will need
to consider Scale - and derived, Offset - possibly being scalable.
This patch adds a new operand `bool &OffsetIsScalable` to
TargetInstrInfo::getMemOperandWithOffset and fixes up all
the places where this function is used, to consider the
offset possibly being scalable.
In most cases, this means bailing out because the algorithm does not
(or cannot) support scalable offsets in places where it does some
form of alias checking for example.
Reviewers: rovka, efriedma, kristof.beyls
Reviewed By: efriedma
Subscribers: wuzish, kerbowa, MatzeB, arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, javed.absar, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72758
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
For a file in WebKit, this brings the time spent in LiveDebugValues down
from 16 minutes to 2 minutes. The reduction comes from iterating the set
of open variable locations just once in transferRegisterDef. Post-patch,
the most expensive item inside of transferRegisterDef is a call to
VarLoc::isDescribedByReg, which we have to do.
Testing: I built LNT using the Os-g cmake cache with & without this
patch, then diffed the object files to verify there was no binary diff.
rdar://59446577
Differential Revision: https://reviews.llvm.org/D74633
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Produce an unmerge to a narrower type and introduce a narrower shift
if needed. I wasn't sure if there was a better way to parameterize the
target's preferred shift type for the GICombineRule, so manually call
the combine helper.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
Summary:
When using strict fp, it is required to update the
chain when performing integer type promotion of a
operand to a integer to floating point conversion.
Reviewers: craig.topper, john.brawn
Reviewed By: craig.topper
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74597
Follow-up for D74006.
When the integrated assembler is used, we use SHF_LINK_ORDER. The
linked-to symbol is part of ELFSectionKey, thus we can omit the unique
ID.
In https://reviews.llvm.org/rG8b737688c21a9755cae14cb9343930e0882164ab I
switched the condition gating the creation of the descriptor symbol from
checking the MCAsmInfo if we need to support descriptors, to if the OS
was AIX. Technically the 2 should be interchangeable: if we are
targeting AIX then we need to emit XCOFF object files, and the MCAsmInfo
must return true for needing function descriptors.
This doesn't account for lit test with runsteps that only set the arch.
Eg: test/CodeGen/XCore/section-name.ll
which when run natively on AIX we end up with a target xcore-ibm-aix and
needFunctionDescriptors is false.
This patch reverts to using the MCAsmInfo and adds an assert that the
target OS must be AIX since that is the only target using the descriptor
hook.
Differential Revision: https://reviews.llvm.org/D74622
This is more or less directly ported from the AMDGPU custom lowering
for FP_TO_FP16. I made a few minor fixups (using G_UNMERGE_VALUES
instead of creating shift/trunc to extract the two halves, and zexting
an inverted compare instead of select_cc).
This also does not include the fast math expansion the DAG which
converts to f32 and then to f16. I think that belongs in a
pre-legalize combine instead.
Like COPY instructions explained in D70616, we don't check the constraints
when combining G_UNMERGE_VALUES. Use the same logic used in D70616 to check
if registers can be replaced, or a COPY instruction needs to be built.
https://reviews.llvm.org/D70564
The goal of this patch is to maximize CPU utilization on multi-socket or high core count systems, so that parallel computations such as LLD/ThinLTO can use all hardware threads in the system. Before this patch, on Windows, a maximum of 64 hardware threads could be used at most, in some cases dispatched only on one CPU socket.
== Background ==
Windows doesn't have a flat cpu_set_t like Linux. Instead, it projects hardware CPUs (or NUMA nodes) to applications through a concept of "processor groups". A "processor" is the smallest unit of execution on a CPU, that is, an hyper-thread if SMT is active; a core otherwise. There's a limit of 32-bit processors on older 32-bit versions of Windows, which later was raised to 64-processors with 64-bit versions of Windows. This limit comes from the affinity mask, which historically is represented by the sizeof(void*). Consequently, the concept of "processor groups" was introduced for dealing with systems with more than 64 hyper-threads.
By default, the Windows OS assigns only one "processor group" to each starting application, in a round-robin manner. If the application wants to use more processors, it needs to programmatically enable it, by assigning threads to other "processor groups". This also means that affinity cannot cross "processor group" boundaries; one can only specify a "preferred" group on start-up, but the application is free to allocate more groups if it wants to.
This creates a peculiar situation, where newer CPUs like the AMD EPYC 7702P (64-cores, 128-hyperthreads) are projected by the OS as two (2) "processor groups". This means that by default, an application can only use half of the cores. This situation could only get worse in the years to come, as dies with more cores will appear on the market.
== The problem ==
The heavyweight_hardware_concurrency() API was introduced so that only *one hardware thread per core* was used. Once that API returns, that original intention is lost, only the number of threads is retained. Consider a situation, on Windows, where the system has 2 CPU sockets, 18 cores each, each core having 2 hyper-threads, for a total of 72 hyper-threads. Both heavyweight_hardware_concurrency() and hardware_concurrency() currently return 36, because on Windows they are simply wrappers over std:🧵:hardware_concurrency() -- which can only return processors from the current "processor group".
== The changes in this patch ==
To solve this situation, we capture (and retain) the initial intention until the point of usage, through a new ThreadPoolStrategy class. The number of threads to use is deferred as late as possible, until the moment where the std::threads are created (ThreadPool in the case of ThinLTO).
When using hardware_concurrency(), setting ThreadCount to 0 now means to use all the possible hardware CPU (SMT) threads. Providing a ThreadCount above to the maximum number of threads will have no effect, the maximum will be used instead.
The heavyweight_hardware_concurrency() is similar to hardware_concurrency(), except that only one thread per hardware *core* will be used.
When LLVM_ENABLE_THREADS is OFF, the threading APIs will always return 1, to ensure any caller loops will be exercised at least once.
Differential Revision: https://reviews.llvm.org/D71775
replaceDbgDeclare is used to update the descriptions of stack variables
when they are moved (e.g. by ASan or SafeStack). A side effect of
replaceDbgDeclare is that it moves dbg.declares around in the
instruction stream (typically by hoisting them into the entry block).
This behavior was introduced in llvm/r227544 to fix an assertion failure
(llvm.org/PR22386), but no longer appears to be necessary.
Hoisting a dbg.declare generally does not create problems. Usually,
dbg.declare either describes an argument or an alloca in the entry
block, and backends have special handling to emit locations for these.
In optimized builds, LowerDbgDeclare places dbg.values in the right
spots regardless of where the dbg.declare is. And no one uses
replaceDbgDeclare to handle things like VLAs.
However, there doesn't seem to be a positive case for moving
dbg.declares around anymore, and this reordering can get in the way of
understanding other bugs. I propose getting rid of it.
Testing: stage2 RelWithDebInfo sanitized build, check-llvm
rdar://59397340
Differential Revision: https://reviews.llvm.org/D74517
Patchable statepoint is lowered into sequence of nops, so zeroed call target
should not be on register. It is better to use getTargetConstant instead
of getConstant to select zero constant for call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D74465
Current tail duplication embedded in MBP duplicates a BB into all or none of its predecessors without too much cost analysis. So sometimes it is duplicated into cold predecessors, and in other cases it may miss the duplication into hot predecessors.
This patch improves tail duplication in 3 aspects:
A successor can be duplicated into part of its predecessors.
A more fine-grained benefit analysis, combined with 1, now a successor is duplicated into hot predecessors only.
If a successor can't be duplicated into one predecessor, it doesn't impact the duplication into other predecessors.
Differential Revision: https://reviews.llvm.org/D73387
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
Summary:
Right now the alignment of the lower half of a store is computed as
align/2, which fails for unaligned stores (align = 1), and is overly
pessimitic for, e.g. a 8 byte store aligned to 4 bytes.
Fixes PR44851
Fixes PR44877
Reviewers: gchatelet, spatel, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74311
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
The method attempts to find loads that can be legally clustered by
looking for loads consuming the same chain glue token.
However, the old code looks at _all_ users of values produced by the
chain node -- including uses of the loaded/returned value of volatile
loads or atomics. This could lead to circular dependencies which then
failed during scheduling.
With this change, we filter out users by getResNo, i.e. by which
SDValue value they use, to ensure that we only look at users of the
chain glue token.
This appears to be a rather old bug, which is perhaps surprising.
However, the test case is actually quite fragile (i.e., it is hidden
by fairly small changes), and the test _must_ use volatile loads for
the bug to manifest.
Reviewers: arsenm, bogner, craig.topper, foad
Subscribers: MatzeB, jvesely, wdng, hiraditya, javed.absar, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74253
This adds a strict version of FP16_TO_FP and FP_TO_FP16 and uses
them to implement soft promotion for the half type. This is
enough to provide basic support for __fp16 with strictfp.
Add the necessary X86 support to use VCVTPS2PH/VCVTPH2PS when F16C
is enabled.
Instructions marked as FrameSetup do not cause requestLabelAfterInsn to
be called and so no such label is generated. Call instructions which
require call site entries to be generated require this label to be
present in order to calculate the return PC offset/address, but the
check for whether the call instruction is marked as FrameSetup was not
present.
Therefore in the case where a call instruction is marked as FrameSetup,
an assertion failure occurs if a call site entry is to be generated.
This is the case with RISC-V's implementation of save/restore via
library calls.
Differential Revision: https://reviews.llvm.org/D71593
Fixup the UserValue methods to use FragmentInfo instead of DIExpression because
the DIExpression is only ever used to get the to get the FragmentInfo. The
DIExpression is meaningless in the UserValue class because each definition point
added to a UserValue may have a unique DIExpression.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D74057
Rename the class DbgValueLocation to DbgVariableValue and instances from Loc to
DbgValue. These names better express the new semantics introduced in D74053.
The class previously represented a { Location } only. It now represents a
{ Location, DIExpression } pair which together describe a value.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D74055
LiveDebugVariables uses interval maps to explicitly represent DBG_VALUE
intervals. DBG_VALUEs are filtered into an interval map based on their {
Variable, DIExpression }. The interval map will coalesce adjacent entries that
use the same { Location }. Under this model, DBG_VALUEs which refer to the same
bits of the same variable will be filtered into different interval maps if they
have different DIExpressions which means the original intervals will not be
properly preserved.
This patch fixes the problem by using { Variable, Fragment } to filter the
DBG_VALUEs into maps, and coalesces adjacent entries iff they have the same
{ Location, DIExpression } pair.
The solution is not perfect because we see the similar issues appear when
partially overlapping fragments are encountered, but is far simpler than a
complete solution (i.e. D70121).
Fixes: pr41992, pr43957
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D74053
A downstream test exposed a simple logic bug with the manual pointer
stripping code, fix that by just using stripPointerCasts() on the value.
I don't think there's a way to expose this issue upstream.
SUMMARY:
The patch is enable to support Mergeable2ByteCString and Mergeable4ByteCString
Reviewers: daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D74164
Add a simplification to fuse a manual vector extract with shifts and
truncate into a bitcast.
Unpacking and packing values into vectors is only optimized with
extractelement instructions, not when manually unpacked using shifts
and truncates.
This patch simplifies shifts and truncates into a bitcast if possible.
Simplify (build_vec (trunc $1)
(trunc (srl $1 width))
(trunc (srl $1 (2 * width))) ...)
to (bitcast $1)
Differential Revision: https://reviews.llvm.org/D73892
Use the isCandidateForCallSiteEntry().
This should mostly be an NFC, but there are some parts ensuring
the moveCallSiteInfo() and copyCallSiteInfo() operate with call site
entry candidates (both Src and Dest should be the call site entry
candidates).
Differential Revision: https://reviews.llvm.org/D74122
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Summary:
For CTTZ we place a set bit just past where the non-promoted type
stopped so the extended bits won't be used for the count. For
CTTZ_ZERO_UNDEF we don't care what happens if no bits are set in
the original type and we end up counting into the extended bits.
So we can just use ANY_EXTEND for both cases.
This matches what is done in type legalization for these operations.
We make no effort to force the upper bits to zero.
Differential Revision: https://reviews.llvm.org/D74111
Calls to ObjC's objc_msgSend function are done by bitcasting the function global
to the required function type signature. This patch looks through this bitcast
so that we can do a direct call with bl on arm64 instead of using an indirect blr.
Differential Revision: https://reviews.llvm.org/D74241
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Allows more flexible use of buildMerge in places where
use operands are available as SrcOp since it does not
require explicit conversion to Register.
Simplify code with new buildMerge.
Differential Revision: https://reviews.llvm.org/D74223
This is a one off special case, since actually implementing full inline asm
support will be much more involved. This lets us compile a lot more code as a
common simple case.
Differential Revision: https://reviews.llvm.org/D74201
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The type passed to lower was invalid, so I'm not sure how this was
even working before. The source and destination type also do not have
to match, so make sure to use the right ones.
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
Summary:
This patch reorders the emission of debug_str section, so that
string can come after macros.
This is necessary for macro forms like DW_MACRO_define_strp,
which emits macro as a string in debug_str section.
"linked-to section" is used by the ELF spec. By analogy, "linked-to
symbol" is a good name for the signature symbol. The word "linked-to"
implies a directed edge and makes it clear its relation with "sh_link",
while one can argue that "associated" means an undirected edge.
Also, combine tests and add precise SMLoc to improve diagnostics.
Reviewed By: eugenis, grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D74082
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This reverts commit 3137fe4d23.
I'm backing out D68945, which this patch is a follow up for. It'll be
re-landed when D68945 is fixed.
The changes to dbg-value-func-arg.ll occur because our handling of certain
kinds of location now mixes up indirection that happens at different points
in a DIExpression. While this is a regression, it's a return to the prior
behaviour while a better patch is sought.
This reverts commit 2d3174c4df.
The overall solution for this problem is reverting D68945, which wasn't
handling the -O0 path through the codegen backend correctly. See:
discussion in D73526.
To find the instruction in the block for a given ID, first a count and then a
lookup was performed in the map, which is almost the same thing, thus doing
double the work.
Differential Revision: https://reviews.llvm.org/D73866
Summary:
ARM Type Promotion pass does not clear
the container that defines if one variable
was visited or not, missing optimization
opportunities by luck when two llvm:Values
from different functions are allocated at
the same memory address.
Also fixes a comment and uses existing
method to pop and obtain last element
of the worklist.
Reviewers: samparker
Reviewed By: samparker
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73970
This is a compile-time optimization for PHIElimination (splitting of critical
edges), which was reported at https://bugs.llvm.org/show_bug.cgi?id=44249. As
discussed there, the way to remedy the slowdowns with huge functions is to
pre-compute the live-in registers for each MBB in an efficient way in
PHIElimination.cpp and then pass that information along to
LiveVariabless::addNewBlock().
In all the huge test programs where this slowdown has been noticable, it has
dissapeared entirely with this patch.
Review: Björn Pettersson, Quentin Colombet.
Differential Revision: https://reviews.llvm.org/D73152
The legalizer produces a lot of these, and they make reading legalized
MIR annoying. For some reason, this does seem to sometimes introduce
copies of implicit def, which is dumb.
contractCrossBankCopyIntoStore() finds the instruction defines the
source register and uses its output to replace the register. There are,
however, instructions that have multiple outputs, e.g. G_UNMERGE_VALUES.
Current implementation hardcodes to operand 0 and has no way of knowing
which output should be used.
This change adds another function to directly return the register that
is the source of the register and use that for folding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44783
Differential Revision: https://reviews.llvm.org/D74005
We currently only handle mem instructions with a single define.
Avoid the call site parameter debug info when we find the case with
multiple defs, rather than throwing an assert.
Differential Revision: https://reviews.llvm.org/D73954
Summary:
This reverts commit 3ef169e586. The
purpose of this commit was to allow stack machines to perform
instruction selection for instructions with variadic defs. However,
MachineInstrs fundamentally cannot support variadic defs right now, so
this change does not turn out to be useful.
Depends on D73927.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73928
Originally committed in: 1ced28cbe7
Reverted in: f75301d16d
(reverted due to tests failing on non-linux/x86 targets, tests have since been
generalized and specialized... since Split DWARF isn't supported on non-elf
targets anyway and we have no way to run on "whatever elf target is available"
so they fail on MacOS without an explicit target triple)
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
shouldOptimizeForSize is showing up in a profile, spending around 10%
of the pass time in one function. This should probably not be so slow,
but the much cheaper attribute check should be done first anyway.
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
This patch reverts part of r362750 / D62650, which stopped
LiveDebugVariables from trimming leading variable location ranges down
to only covering those instructions that are in scope. I've observed some
circumstances where the number of DBG_VALUEs in a function can be
amplified in an un-necessary way, to cover more instructions that are
out of scope, leading to very slow compile times. Trimming the range
of instructions that the variables cover solves the slow compile times.
The specific problem that r362750 tries to fix is addressed by the
assignment to RStart that I've added. Any variable location that begins
at the first instruction of a block will now be considered to begin at the
start of the block. While these sound the same, the have different
SlotIndexes, and the register allocator may shoehorn additional
instructions in between the two. The test added in the past
(wrong_debug_loc_after_regalloc.ll) still works with this modification.
live-debug-variables.ll has a range trimmed to not cover the prologue of
the function, while dbg-addr-dse.ll has a DBG_VALUE sink past one
instruction with no DebugLoc, which is expected behaviour.
Differential Revision: https://reviews.llvm.org/D73691
Ensure that OptLevelChanger::SavedFastISel is initialized in the constructor.
This should be NFC - as the equivalent 'same opt level' early-out is used in the destructor as well, so SavedFastISel is only actually referenced in the general case.
Differential Revision: https://reviews.llvm.org/D73875
Under MVE, we do not have any lowering for fminimum, which a
vector_reduce_fmin without NoNan will be expanded into. As with the
other recent patches, force this to expand in the pre-isel pass. Note
that Neon lowering would be OK because the scalar fminimum uses the
vector VMIN instruction, but is probably better to just rely on the
scalar operations, which is what is done here.
Also fixes what appears to be the reversal of INF vs -INF in the
vector_reduce_fmin widening code.
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
Start using a new strategy with a combination of merge and unmerges.
This allows scalarizing before lowering, which in cases like
<2 x s128> avoids producing giant illegal shifts.
RegAllocGreedy uses a fairly compile time intensive splitting heuristic
called region splitting. This heuristic was disabled via another heuristic
when it is likely that it won't be worth the compile time. The only way
to control this other heuristic was via a command line option (huge-size-for-split).
This commit gives more control on this heuristic by making it overridable
by the target using a target hook in TargetRegisterInfo called
shouldRegionSplitForVirtReg.
The default implementation of this hook keeps the heuristic as it was
before this patch.
We have to be careful in SimplifyDemandedBits with loads in case we attempt to combine back to a constant (which then gets turned into a constant pool load again), but we can at least set the upper KnownBits for a ZEXTLoad to zero.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
Summary:
A Copy with a source that is zeros is the same as a Set of zeros.
This fixes the invariant that SrcAlign should always be non-null.
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73791
The code paths in the absence of TargetMachine, TargetLowering or
TargetRegisterInfo are poorly tested. As rL285987 said, requiring
TargetPassConfig allows us to delete many (untested) checks littered
everywhere.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D73754
The current FirstMI.getDebugLoc() is actually null in almost all cases.
If it isn't, the generated .loc will be considered initial. The .loc
will have the prologue_end flag and terminate the prologue prematurely.
Also use an overload of BuildMI that will not prepend
PATCHABLE_FUNCTION_ENTRY to a MachineInstr bundle.
This is based on this llvm-dev thread http://lists.llvm.org/pipermail/llvm-dev/2019-December/137521.html
The current strategy for f16 is to promote type to float every except where the specific width is required like loads, stores, and bitcasts. This results in rounding occurring in odd places instead of immediately after arithmetic operations. This interacts in weird ways with the __fp16 type in clang which is a storage only type where arithmetic is always promoted to float. InstCombine can remove some fpext/fptruncs around such arithmetic and turn it into arithmetic on half. This wouldn't be so bad if SelectionDAG was able to put those fpext/fpround back in when it promotes.
It is also not obvious how to handle to make the existing strategy work with STRICT fp. We need to use STRICT versions of the conversions which require chain operands. But if the conversions are created for a bitcast, there is no place to get an appropriate chain from.
This patch implements a different strategy where conversions are emitted directly around arithmetic operations. And otherwise its passed around as an i16 including in arguments and return values. This can result in more conversions between arithmetic operations, but is closer to matching the IR the frontend generates for __fp16. And it will allow us to use the chain from constrained arithmetic nodes to link the STRICT_FP_TO_FP16/STRICT_FP16_TO_FP that will need to be added. I've set it up so that each target can opt into the new behavior. Converting all the targets myself was more than I was able to handle.
Differential Revision: https://reviews.llvm.org/D73749
Significant missing hashing - as per the comment this was only meant to
skip member functions (unspecified, but I think it's legible as member
function declarations, not definitions) but was skipping all named
subprograms (so only hashed child DIEs for member function definitions -
because they didn't have a direct name, but only a name given indirectly
in the DW_AT_specification-referenced DIE)
Summary:
Applying this cleanup:
- MIRBuilder.buildInstr(TargetOpcode::G_ASHR)
- .addDef(Shifted)
- .addUse(Res)
- .addUse(ShiftAmt);
+ MIRBuilder.buildAShr(Shifted, Res, ShiftAmt);
caused an assertion failure here:
llc: /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/MachineRegisterInfo.cpp:404: llvm::MachineInstr *llvm::MachineRegisterInfo::getVRegDef(unsigned int) const: Assertion `(I.atEnd() || std::next(I) == def_instr_end()) && "getVRegDef assumes a single definition or no definition"' failed.
#4 0x00000000050a6d96 in llvm::MachineRegisterInfo::getVRegDef (this=0x74606a0, Reg=2147483650) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/MachineRegisterInfo.cpp:403
#5 0x00000000066148f6 in llvm::getConstantVRegValWithLookThrough (VReg=2147483650, MRI=..., LookThroughInstrs=false, HandleFConstant=true) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:244
#6 0x00000000066147da in llvm::getConstantVRegVal (VReg=2147483650, MRI=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:210
#7 0x0000000006615367 in llvm::ConstantFoldBinOp (Opcode=101, Op1=2147483650, Op2=2147483656, MRI=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/Utils.cpp:341
#8 0x000000000657eee0 in llvm::CSEMIRBuilder::buildInstr (this=0x7465010, Opc=101, DstOps=..., SrcOps=..., Flag=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/CSEMIRBuilder.cpp:160
#9 0x0000000003645958 in llvm::MachineIRBuilder::buildAShr (this=0x7465010, Dst=..., Src0=..., Src1=..., Flags=...) at /home/jayfoad2/git/llvm-project/llvm/include/llvm/CodeGen/GlobalISel/MachineIRBuilder.h:1298
#10 0x00000000065c35b1 in llvm::LegalizerHelper::lower (this=0x7fffffffb5f8, MI=..., TypeIdx=0, Ty=...) at /home/jayfoad2/git/llvm-project/llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp:2020
because at this point there are two instructions defining Res: the
original G_SMULO/G_UMULO and the new G_MUL that we built. The fix is
to modify the original mul in place, so that there is only ever one
definition of Res.
Reviewers: arsenm, aditya_nandakumar
Subscribers: wdng, rovka, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72842
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::INSERT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Some code gen passes use MBFIWrapper to keep track of the frequency of new
blocks. This was not taken into account and could lead to incorrect frequencies
as MBFI silently returns zero frequency for unknown/new blocks.
Add a variant for MBFIWrapper in the PGSO query interface.
Depends on D73494.
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
One of the exit criteria of computeKnownBits is whether we reach the max
recursive call depth. Before this patch we would check that the
depth is exactly equal to max depth to exit.
Depth may get bigger than max depth if it gets passed to a different
GISelKnownBits object.
This may happen when say a generic part uses a GISelKnownBits object
with some max depth, but then we hit TL.computeKnownBitsForTargetInstr
which creates a new GISelKnownBits object with a different and smaller
depth. In that situation, when we hit the max depth check for the first
time in the target specific GISelKnownBits object, depth may already
be bigger than the current max depth. Hence we would continue to compute
the known bits, until we ran through the full depth of the chain of
computation or ran out of stack space.
For instance, let say we have
GISelKnownBits Info(/*MaxDepth*/ = 10);
Info.getKnownBits(Foo)
// 9 recursive calls to computeKnownBitsImpl.
// Then we hit a target specific instruction.
// The target specific GISelKnownBits does this:
GISelKnownBits TargetSpecificInfo(/*MaxDepth*/ = 6)
TargetSpecificInfo.computeKnownBitsImpl() // <-- next max depth checks would
// always return false.
This commit does not have any test case, none of the in-tree targets
use computeKnownBitsForTargetInstr.
This patch addresses the issue found in https://bugs.llvm.org/show_bug.cgi?id=44585
where a DW_OP_deref was placed at the end of a dwarf expression, resulting in corrupt
symbols when debugging.
This is an attempt to reland with a few fixes for buildbot since I
haven't merged from master in a bit.
Differential Revision: https://reviews.llvm.org/D73526
We can have geps that have a scalar base pointer, and a vector index value, which
means that the base pointer must be splatted into a vector of pointers.
This fixes crashes on arm64 GlobalISel with optimizations enabled.
- Extends the comments related to function descriptors, noting how they
are only used on AIX.
- Changes the condition used to gate the creation of the current function
symbol in AsmPrinter::SetupMachineFunction to reflect being AIX
specific. The creation of the symbol is different because of AIXs
linkage conventions, not because AIX uses function descriptors.
Differential Revision: https://reviews.llvm.org/D73115
Summary:
For -fpatchable-function-entry=N,0 -mbranch-protection=bti, after
9a24488cb6, we place the NOP sled after
the initial BTI.
```
.Lfunc_begin0:
bti c
nop
nop
.section __patchable_function_entries,"awo",@progbits,f,unique,0
.p2align 3
.xword .Lfunc_begin0
```
This patch adds a label after the initial BTI and changes the __patchable_function_entries entry to reference the label:
```
.Lfunc_begin0:
bti c
.Lpatch0:
nop
nop
.section __patchable_function_entries,"awo",@progbits,f,unique,0
.p2align 3
.xword .Lpatch0
```
This placement is compatible with the resolution in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424 .
A local linkage function whose address is not taken does not need a BTI.
Placing the patch label after BTI has the advantage that code does not
need to differentiate whether the function has an initial BTI.
Reviewers: mrutland, nickdesaulniers, nsz, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73680
Commit 9965b12fd1 was supposed to change the offset constant when
lowering load/stores, but only introduced this change for loads. This
patch adds the same fix for stores.
This is passed to legalizeCustom, but not intrinsic. Also remove the
MRI argument, since you can get that from the MachineIRBuilder.
I'm not sure why MachineIRBuilder has a private observer member, and
this is passed separately.
For pow2 constants we should use G_SHL for pattern matching (and perf)
purposes later.
Vector support not yet implemented.
Differential Revision: https://reviews.llvm.org/D73659
For `MC_GlobalAddress` operands referencing **certain** GlobalObjects,
we can lower them to STB_LOCAL aliases to avoid costs brought by
assembler/linker's conservative decisions about symbol interposition:
* An assembler conservatively assumes a global default visibility symbol interposable (ELF
semantics). So relocations in object files are needed even if the code generator assumed
the definition exact and non-interposable.
* The relocations can cause the creation of PLT entries on some targets for -shared links.
A linker conservatively assumes a global default visibility symbol interposable (if not
otherwise constrained by -Bsymbolic/--dynamic-list/VER_NDX_LOCAL/etc).
"certain" refers to GlobalObjects in the intersection of
`hasExactDefinition() and !isInterposable()`: `external`, `appending`, `internal`, `private`.
Local linkages (`internal` and `private`) cannot be interposed. `appending` is for very
few objects LLVM interpret specially. So the set just includes `external`.
This patch emits STB_LOCAL aliases (.Lfoo$local) for such GlobalObjects, so that targets can lower
MC_GlobalAddress operands to STB_LOCAL aliases if applicable.
We may extend the scope and include GlobalAlias in the future.
LLVM's existing -fno-semantic-interposition behaviors give us license to do such optimizations:
* Various optimizations (ipconstprop, inliner, sccp, sroa, etc) treat normal ExternalLinkage
GlobalObjects as non-interposable.
* Before D72197, MC resolved a PC-relative VK_None fixup to a non-local symbol at assembly time (no
outstanding relocation), if the target is defined in the same section. Put it simply, even if IR
optimizations failed to optimize and allowed interposition for the function call in
`void foo() {} void bar() { foo(); }`, the assembler would disallow it.
This patch sets up AsmPrinter infrastructure to make -fno-semantic-interposition more so.
With and without the patch, the object file output should be identical:
`.Lfoo$local` does not take a symbol table entry.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D73228
Summary:
BaseMemOpClusterMutation::apply forms store chains by looking for
control (i.e. non-data) dependencies from one mem op to another.
In the test case, clusterNeighboringMemOps successfully clusters the
loads, and then adds artificial edges to the loads' successors as
described in the comment:
// Copy successor edges from SUa to SUb. Interleaving computation
// dependent on SUa can prevent load combining due to register reuse.
The effect of this is that *data* dependencies from one load to a store
are copied as *artificial* dependencies from a different load to the
same store.
Then when BaseMemOpClusterMutation::apply looks at the stores, it finds
that some of them have a control dependency on a previous load, which
breaks the chains and means that the stores are not all considered part
of the same chain and won't all be clustered.
The fix is to only consider non-artificial control dependencies when
forming chains.
Subscribers: MatzeB, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71717
Add several new helpers to RDA:
- hasLocalDefBefore
- isRegDefinedAfter
- isSafeToDefRegAt
And move two bits of logic from ARMLowOverheadLoops into RDA:
- isSafeToMove
- isSafeToRemove
Both of these have some wrappers too to make them more convienent to
use.
Differential Revision: https://reviews.llvm.org/D73460
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Symbols created for merged external global variables have default
visibility. This can break programs when compiling with -Oz
-fvisibility=hidden as symbols that should be hidden will be exported at
link time.
Differential Revision: https://reviews.llvm.org/D73235
Summary:
To avoid header file circular dependency issues in passing updated MBFI (in
MBFIWrapper) to the interface of profile guided size optimizations.
A prep step for (and split off of) D73381.
Reviewers: davidxl
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73494
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
Summary:
This is mostly NFC. computeForAddSub may give more precise results in
some cases, but that doesn't seem to affect any existing GlobalISel
tests.
Subscribers: rovka, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73431
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Differential Revision: This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
This patch fixes an assertion failure in DwarfExpression that is
triggered when a complex fragment has exactly the size of a
subregister of the register the DBG_VALUE points to *and* there is no
DWARF encoding for the super-register.
I took the opportunity to replace/document some magic values with
static constructor functions to make this code less confusing to read.
rdar://problem/58489125
Differential Revision: https://reviews.llvm.org/D72938
This is a revert-of-revert (i.e. this reverts commit 802bec89, which
itself reverted fa4701e1 and 79daafc9) with a fix folded in. The problem
was that call site tags weren't emitted properly when LTO was enabled
along with split-dwarf. This required a minor fix. I've added a reduced
test case in test/DebugInfo/X86/fission-call-site.ll.
Original commit message:
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
Update #1:
Reland with a fix to create a declaration DIE when the declaration is
missing from the CU's retainedTypes list. The declaration is left out
of the retainedTypes list in two cases:
1) Re-compiling pre-r266445 bitcode (in which declarations weren't added
to the retainedTypes list), and
2) Doing LTO function importing (which doesn't update the retainedTypes
list).
It's possible to handle (1) and (2) by modifying the retainedTypes list
(in AutoUpgrade, or in the LTO importing logic resp.), but I don't see
an advantage to doing it this way, as it would cause more DWARF to be
emitted compared to creating the declaration DIEs lazily.
Update #2:
Fold in a fix for call site tag emission in the split-dwarf + LTO case.
Tested with a stage2 ThinLTO+RelWithDebInfo build of clang, and with a
ReleaseLTO-g build of the test suite.
rdar://46577651, rdar://57855316, rdar://57840415, rdar://58888440
Differential Revision: https://reviews.llvm.org/D70350
The Version was used only to determine the size of an operand of
DW_OP_call_ref. The size was 4 for all versions apart from 2, but
the DW_OP_call_ref operation was introduced only in DWARF3. Thus,
the code may be simplified and using of Version may be eliminated.
Differential Revision: https://reviews.llvm.org/D73264
Summary:
This fixes PR44118. For cases where we have a chain like this:
R8 = R1 (entry value)
R0 = R8
call @foo R0
the code that emits call site entries using entry values would not
follow that chain, instead emitting a call site entry with R8 as
location rather than R0. Such a case was discovered when originally
adding dbgcall-site-orr-moves.mir. This patch fixes that issue. This is
done by changing the ForwardedRegWorklist set to a map in which the
worklist registers always map to the parameter registers that they
describe.
Another thing this patch fixes is that worklist registers now can
describe more than one parameter register at a time. Such a case
occurred in dbgcall-site-interpretation.mir, resulting in a call site
entry not being emitted for one of the parameters.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73168
Summary:
Since D70431 the describeLoadedValue() hook takes a parameter register,
meaning that it can now be asked to describe any register. This means
that we can drop the difference between explicit and implicit defines
that we previously had in collectCallSiteParameters().
I have not found any case for any upstream targets where a parameter
register is only implicitly defined, and does not overlap with any
explicit defines. I don't know if such a case would even make sense. So
as far as I have tested, this patch should be a non-functional change.
However, this reduces the complexity of the code a bit, and it will
simplify the implementation of an upcoming patch which solves PR44118.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73167
G_CTPOP is generated from llvm.ctpop.<type> intrinsics, clang generates
these intrinsics from __builtin_popcount and __builtin_popcountll.
Add lower and narrow scalar for G_CTPOP.
Lower G_CTPOP for MIPS32.
Differential Revision: https://reviews.llvm.org/D73216
llvm.cttz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
G_CTTZ is generated from llvm.cttz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_ctz and
__builtin_ctzll.
G_CTTZ_ZERO_UNDEF comes from llvm.cttz.<type> (<type> <src>, i1 true).
Clang generates such intrinsics as parts of expansion of builtin_ffs
and builtin_ffsll. It is also traditionally part of and many
algorithms that are now predicated on avoiding zero-value inputs.
Add narrow scalar (algorithm uses G_CTTZ_ZERO_UNDEF) for G_CTTZ.
Lower G_CTTZ and G_CTTZ_ZERO_UNDEF for MIPS32.
Differential Revision: https://reviews.llvm.org/D73215
llvm.ctlz.<type> intrinsic has additional i1 argument is_zero_undef,
it tells whether zero as the first argument produces a defined result.
MIPS clz instruction returns 32 for zero input.
G_CTLZ is generated from llvm.ctlz.<type> (<type> <src>, i1 false)
intrinsics, clang generates these intrinsics from __builtin_clz and
__builtin_clzll.
G_CTLZ_ZERO_UNDEF can also be generated from llvm.ctlz with true as
second argument. It is also traditionally part of and many algorithms
that are now predicated on avoiding zero-value inputs.
Add narrow scalar for G_CTLZ (algorithm uses G_CTLZ_ZERO_UNDEF).
Lower G_CTLZ_ZERO_UNDEF and select G_CTLZ for MIPS32.
Differential Revision: https://reviews.llvm.org/D73214
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
... as well as:
Revert "[DWARF] Defer creating declaration DIEs until we prepare call site info"
This reverts commit fa4701e197.
This reverts commit 79daafc903.
There have been reports of this assert getting hit:
CalleeDIE && "Could not find DIE for call site entry origin
Teach the GISelKnowBits analysis how to deal with PHI operations.
PHIs are essentially COPYs happening on edges, so we can just reuse
the code for COPY.
This is NFC COPY-wise has we leave Depth untouched when calling
computeKnownBitsImpl for COPYs, like it was before this patch.
Increasing Depth is however required for PHIs as they may loop back to
themselves and we would end up in an infinite loop if we were not
increasing Depth.
Differential Revision: https://reviews.llvm.org/D73317
Updated FoldConstantArithmetic method signature to match that of
FoldConstantVectorArithmetic in preparation for merging the two
functions together
https://bugs.llvm.org/show_bug.cgi?id=36544
This is the first step in combining the various
FoldConstantVectorArithmetic and FoldConstantVectorArithmetic
functions into one FoldConstantArithmetic function.
Differential Revision: https://reviews.llvm.org/D72870
Unlike the existing code that I modified here, I only handle the
case where the strict_fsetcc has a single use. Not sure exactly
how to handle multiples uses.
Testing this on X86 is hard because we already have a other
combines that get rid of lowered version of the integer setcc that
this xor will eventually become. So this combine really just
saves a bunch of extra nodes being created. Not sure about other
targets.
Differential Revision: https://reviews.llvm.org/D71816
Scheduler sends NumLoads argument into shouldClusterMemOps()
one less the actual cluster length. So for 2 instructions
it will pass just 1. Correct this number.
This is NFC for in tree targets.
Differential Revision: https://reviews.llvm.org/D73292
Previously LiveDebugValues pass would consider meta instructions that 'fiddle' with liveness of registers as register definitions when transfering register defs. This would mean that, for example, a KILL instruction would cause LiveDebugValues to terminate the range of an earlier DBG_VALUE instruction resulting in the none propogation of said DBG_VALUE instructions into later blocks.
This patch adds the check and a helpful comment, fixes a test that previously tested for the broken behaviour by coincidence and adds a test specifically for this.
reviewers: vsk, dstenb, djtodoro
Differential Revision: https://reviews.llvm.org/D73210
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Similar to the function attribute `prefix` (prefix data),
"patchable-function-prefix" inserts data (M NOPs) before the function
entry label.
-fpatchable-function-entry=2,1 (1 NOP before entry, 1 NOP after entry)
will look like:
```
.type foo,@function
.Ltmp0: # @foo
nop
foo:
.Lfunc_begin0:
# optional `bti c` (AArch64 Branch Target Identification) or
# `endbr64` (Intel Indirect Branch Tracking)
nop
.section __patchable_function_entries,"awo",@progbits,get,unique,0
.p2align 3
.quad .Ltmp0
```
-fpatchable-function-entry=N,0 + -mbranch-protection=bti/-fcf-protection=branch has two reasonable
placements (https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01185.html):
```
(a) (b)
func: func:
.Ltmp0: bti c
bti c .Ltmp0:
nop nop
```
(a) needs no additional code. If the consensus is to go for (b), we will
need more code in AArch64BranchTargets.cpp / X86IndirectBranchTracking.cpp .
Differential Revision: https://reviews.llvm.org/D73070
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call.
Match the approach in SimplifyDemandedBits/ComputeNumSignBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits call.
Match the approach in SimplifyDemandedBits where we calculate the demanded elts and then have a common path for the ComputeKnownBits/ComputeNumSignBits call, additionally we only ever need original demanded elts of the base vector even if the index is unknown.
The low_pc is analog to the DW_AT_call_return_pc, since it describes
the return address after the call. The DW_AT_call_pc is the address
of the call instruction, and we don't use it at the moment.
Differential Revision: https://reviews.llvm.org/D73173
Summary:
We create a number of standard types of control sections in multiple places for
things like the function descriptors, external references and the TOC anchor
among others, so it is possible for their properties to be defined
inconsistently in different places. This refactor moves their creation and
properties into functions in the TargetLoweringObjectFile class hierarchy, where
functions for retrieving various special types of sections typically seem
to reside.
Note: There is one case in PPCISelLowering which is specific to function entry
points which we don't address since we don't have access to the TLOF there.
Reviewers: DiggerLin, jasonliu, hubert.reinterpretcast
Reviewed By: jasonliu, hubert.reinterpretcast
Subscribers: wuzish, nemanjai, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72347
Summary:
Without the BFI update, some hot blocks are incorrectly treated as cold code.
This fixes a FDO perf regression in the TSVC benchmark from D71288.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73146
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
The generic BaseMemOpClusterMutation calls into TargetInstrInfo to
analyze the address of each load/store instruction, and again to decide
whether two instructions should be clustered. Previously this had to
represent each address as a single base operand plus a constant byte
offset. This patch extends it to support any number of base operands.
The old target hook getMemOperandWithOffset is now a convenience
function for callers that are only prepared to handle a single base
operand. It calls the new more general target hook
getMemOperandsWithOffset.
The only requirements for the base operands returned by
getMemOperandsWithOffset are:
- they can be sorted by MemOpInfo::Compare, such that clusterable ops
get sorted next to each other, and
- shouldClusterMemOps knows what they mean.
One simple follow-on is to enable clustering of AMDGPU FLAT instructions
with both vaddr and saddr (base register + offset register). I've left
a FIXME in the code for this case.
Differential Revision: https://reviews.llvm.org/D71655
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
In GlobalISel we may in some unfortunate circumstances generate PHIs with
operands that are on separate banks. If-conversion doesn't currently check for
that case and ends up generating a CSEL on AArch64 with incorrect register
operands.
Differential Revision: https://reviews.llvm.org/D72961
Summary:
WebAssembly is unique among upstream targets in that it does not at
any point use physical registers to store values. Instead, it uses
virtual registers to model positions in its value stack. This means
that some target-independent lowering activities that would use
physical registers need to use virtual registers instead for
WebAssembly and similar downstream targets. This CL generalizes the
existing `usesPhysRegsForPEI` lowering hook to
`usesPhysRegsForValues` in preparation for using it in more places.
One such place is in InstrEmitter for instructions that have variadic
defs. On register machines, it only makes sense for these defs to be
physical registers, but for WebAssembly they must be virtual registers
like any other values. This CL changes InstrEmitter to check the new
target lowering hook to determine whether variadic defs should be
physical or virtual registers.
These changes are necessary to support a generalized CALL instruction
for WebAssembly that is capable of returning an arbitrary number of
arguments. Fully implementing that instruction will require additional
changes that are described in comments here but left for a follow up
commit.
Reviewers: aheejin, dschuff, qcolombet
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71484
These names have been changed from CamelCase to camelCase, but there were
many places (comments mostly) that still used the old names.
This change is NFC.
This was unconditionally folding this to the source operand, even if the access was out of bounds. Use undef instead of the extract is not the first element.
This helps with some cases where 3-vectors are legalized and avoids processing the 4th component.
Original Patch by: arsenm (Matt Arsenault)
Differential Revision: https://reviews.llvm.org/D51589
Summary:
This was reverted in 328e0f3dca due to
chromium bot failure. This revision addresses that case.
Original commit message:
Summary:
This patch will provide support for auto return type for the C++ member
functions. Before this return type of the member function is deduced and
stored in the DIE.
This patch includes llvm side implementation of this feature.
Patch by: Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: dblaikie, aprantl, shafik, alok, SouraVX, jini.susan.george
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D70524
StackColoring::remapInstructions() remaps MachineOperand frame index (e.g. %stack.1 -> %stack.0)
but does not remap FixedStackPseudoSourceValue frame index (e.g. store 4 into %stack.1.ap2.i.i)
referenced by MachineMemoryOperand.
This can cause an assertion failure when LiveDebugValues references a dead stack object.
It is difficult to craft a test case. -g, va_copy and stack-coloring are required.
I can only reproduce it on ppc32.
This intention is to move patchable-function before aarch64-branch-targets
(configured in AArch64PassConfig::addPreEmitPass) so that we emit BTI before NOPs
(see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424).
This also allows addPreEmitPass() passes to know the precise instruction sizes if they want.
Tried x86-64 Debug/Release builds of ccls with -fxray-instrument -fxray-instruction-threshold=1.
No output difference with this commit and the previous commit.
This makes the SectionLabel handling more resilient - specifically for
future PROPELLER work which will have more CU ranges (rather than just
one per function).
Ultimately it might be nice to make this more general/resilient to
arbitrary labels (rather than relying on the labels being created for CU
ranges & then being reused by ranges, loclists, and possibly other
addresses). It's possible that other (non-rnglist/loclist) uses of
addresses will need the addresses to be in SectionLabels earlier (eg:
move the CU.addRange to be done on function begin, rather than function
end, so during function emission they are already populated for other
use).
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and adds _untied variants of those pseudos
that are allowed to take the base address as a FI operand. This is needed to
simplify recognizing an STGloop instruction as operating on a stack slot
post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
XRay allows tuning by minimum function size, but also always instruments
functions with loops in them. If the minimum function size is set to a
large value the loop instrumention ends up causing most functions to be
instrumented anyway. This adds a new flag, xray-ignore-loops, to disable
the loop detection logic.
Differential Revision: https://reviews.llvm.org/D72659
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Introduce a method to walk through use-def chains to decide whether
it's possible to remove a given instruction and its users. These
instructions are then stored in a set until the end of the transform
when they're erased. This is now used to perform checks on the
iteration count (LoopDec chain), element count (VCTP chain) and the
possibly redundant iteration count.
As well as being able to remove chains of instructions, we know also
check that the sub feeding the vctp is producing the expected value.
Differential Revision: https://reviews.llvm.org/D71837
Add DemandedElts handling to ISD::ANY_EXTEND and add missing ISD::ANY_EXTEND_VECTOR_INREG handling. Despite the lack of test changes this code IS being used - its just that the ANY_EXTEND ops are legalized later on (typically to ZERO_EXTEND equivalents) so we typically manage to combine later on.
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
Differential Revision: https://reviews.llvm.org/D71681
This was assuming the narrow target was the source type. Respect the
requested type when these don't match by using intermediate
merges. This avoids producing very wide, illegal shift expansions.
The algorithm here only works if the sint_to_fp doesn't do any
rounding. Otherwise it can round before the offset fixup is
applied. Add an assert to protect this.
To avoid breaking the one test in tree that tested this code
with a set of types that fail the assert, I've enabled i32->f32
to use the i64->f32 algorithm. This only occurs when f64 isn't
a legal type. If f64 is legal then we do i32->f64->f32 instead.
Differential Revision: https://reviews.llvm.org/D72794
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
Recommitting e93e0d413f after reverting due to test failures, which
will hopefully now be fixed. Original commit message:
After expanding the pseudo instructions, update the liveness info.
We do this in a post-order traversal of the loop, including its
exit blocks and preheader(s).
Differential Revision: https://reviews.llvm.org/D72131
Testing compiler-rt, a new assertion failure occurs when building
the GwpAsanTestObjects object. I'm uploading a reproducer to D70597.
This reverts commit 75188b01e9.
If there are DBG_VALUEs between phi and label (after phi and before label),
DBG_VALUE will block PHI lowering after the LABEL. Moving all DBG_VALUEs
after Labels in the function ScheduleDAGSDNodes::EmitSchedule to avoid
impacting PHI lowering.
before:
PHI
DBG_VALUE
LABEL
after: (move DBG_VALUE after label)
PHI
LABEL
DBG_VALUE
then: (phi lowering after label)
LABEL
COPY
DBG_VALUE
Fixes the issue: https://bugs.llvm.org/show_bug.cgi?id=43859
Differential Revision: https://reviews.llvm.org/D70597
This was moved in October 2018, but we don't appear to be using
this for vectors on any in tree target.
Moving it back simplifies D72794 so we can share the code for i32->f32.
When tail duplication estimates a size of tail it uses instruction
count. Account for a number of instrictions in a bundle too.
Differential Revision: https://reviews.llvm.org/D72783
This now develops the same problem G_ZEXT/G_ANYEXT have where the
requested type is assumed to be the source type. This will be fixed
separately by creating intermediate merges.
Summary:
InlineResult is used both in APIs assessing whether a call site is
inlinable (e.g. llvm::isInlineViable) as well as in the function
inlining utility (llvm::InlineFunction). It means slightly different
things (can/should inlining happen, vs did it happen), and the
implicit casting may introduce ambiguity (casting from 'false' in
InlineFunction will default a message about hight costs,
which is incorrect here).
The change renames the type to a more generic name, and disables
implicit constructors.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: kerbowa, arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72744
This reverts D53469, which changed llvm's DWARF emission to emit
DW_AT_call_return_pc as a function-local offset. Such an encoding is not
compatible with post-link block re-ordering tools and isn't standards-
compliant.
In addition to reverting back to the original DW_AT_call_return_pc
encoding, teach lldb how to fix up DW_AT_call_return_pc when the address
comes from an object file pointed-to by a debug map. While doing this I
noticed that lldb's support for tail calls that cross a DSO/object file
boundary wasn't covered, so I added tests for that. This latter case
exercises the newly added return PC fixup.
The dsymutil changes in this patch were originally included in D49887:
the associated test should be sufficient to test DW_AT_call_return_pc
encoding purely on the llvm side.
Differential Revision: https://reviews.llvm.org/D72489
Bitcast only really applies between scalars and vectors. Implement as
an unmerge and remerge. The test needs to tolerate failure since one
of the unmerges currently fails to legalize.
All the callers of this function will be ScheduleDAGMI from the
MachineScheduler. This allows us to use the extra info available in
ScheduleDAGMI without resorting to awkward casts.
Summary:
- `dead-mi-elimination` assumes MIR in the SSA form and cannot be
arranged after phi elimination or DeSSA. It's enhanced to handle the
dead register definition by skipping use check on it. Once a register
def is `dead`, all its uses, if any, should be `undef`.
- Re-arrange the DIE in RA phase for AMDGPU by placing it directly after
`detect-dead-lanes`.
- Many relevant tests are refined due to different register assignment.
Reviewers: rampitec, qcolombet, sunfish
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72709
This code is untested in tree because the "APFloat::semanticsPrecision(sem) >= SrcVT.getSizeInBits() - 1" check is false for most combinations for int and fp types except maybe i32 and f64. For that you would need i32 to be an illegal type, but f64 to be legal and have custom handling for legalizing the split sint_to_fp. The precision check itself was added in 2010 to fix a double rounding issue in the algorithm that would occur if the sint_to_fp was not able to do the conversion without rounding.
Differential Revision: https://reviews.llvm.org/D72728
Summary:
Mem op clustering adds a weak edge in the DAG between two loads or
stores that should be clustered, but the direction of this edge is
pretty arbitrary (it depends on the sort order of MemOpInfo, which
represents the operands of a load or store). This often means that two
loads or stores will get reordered even if they would naturally have
been scheduled together anyway, which leads to test case churn and goes
against the scheduler's "do no harm" philosophy.
The fix makes sure that the direction of the edge always matches the
original code order of the instructions.
Reviewers: atrick, MatzeB, arsenm, rampitec, t.p.northover
Subscribers: jvesely, wdng, nhaehnle, kristof.beyls, hiraditya, javed.absar, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72706
SUMMARY:
In this patch we put the global variable in a Csect which's SectionKind is "ReadOnlyWithRel" into Data Section.
Reviewers: hubert.reinterpretcast,jasonliu,Xiangling_L
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D72461
Code in getRoot made the assumption that every node in PendingLoads
must always itself have a dependency on the current DAG root node.
After the changes in 04a8696, it turns out that this assumption no
longer holds true, causing wrong codegen in some cases (e.g. stores
after constrained FP intrinsics might get deleted).
To fix this, we now need to make sure that the TokenFactor created
by getRoot always includes the previous root, if there is no implicit
dependency already present.
The original getControlRoot code already has exactly this check,
so this patch simply reuses that code now for getRoot as well.
This fixes the regression.
NFC if no constrained FP intrinsic is present.
As mentioned by @nikic on rGef5debac4302, we can merge the guaranteed bottom zero bits from the shifted value, and then, if a min shift amount is known, zero out the bottom bits as well.
As mentioned by @nikic on rGef5debac4302 (although that was just about SHL), we can merge the guaranteed top zero bits from the shifted value, and then, if a min shift amount is known, zero out the top bits as well.
SHL tests / handling will be added in a follow up patch.
We're planning to remove the shufflemask operand from ShuffleVectorInst
(D72467); fix GlobalISel so it doesn't depend on that Constant.
The change to prelegalizercombiner-shuffle-vector.mir happens because
the input contains a literal "-1" in the mask (so the parser/verifier
weren't really handling it properly). We now treat it as equivalent to
"undef" in all contexts.
Differential Revision: https://reviews.llvm.org/D72663
Summary:
be15dfa88f broke GlobalISel's usage of getSetCCInverse() which currently
appears to be limited to our out-of-tree backend. GlobalISel doesn't use
EVT's and isn't able to derive them from the information it has as it
doesn't distinguish between integer and floating point types (that
distinction is made by operations rather than values). Bring back the
bool version of getSetCCInverse() in a way that doesn't break the intent
of be15dfa88f but also allows GlobalISel to continue using it.
Reviewers: spatel, bogner, arichardson
Reviewed By: arichardson
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72309
This patch makes it so that cases where multiple instructions that differ only
in their FrameIndex MachineOperand values no longer collide. For instance:
%1:_(p0) = G_FRAME_INDEX %stack.0
%2:_(p0) = G_FRAME_INDEX %stack.1
Prior to this patch these instructions would collide together.
Differential Revision: https://reviews.llvm.org/D71583
Some target like arm/riscv with soft-float will have compiling crash when using -fno-unsafe-math-optimization option.
This patch will add the missing strict FP support to SoftenFloatRes_XINT_TO_FP.
Differential Revision: https://reviews.llvm.org/D72277
We need to ensure that fpexcept.strict nodes are not optimized away even if
the result is unused. To do that, we need to chain them into the block's
terminator nodes, like already done for PendingExcepts.
This patch adds two new lists of pending chains, PendingConstrainedFP and
PendingConstrainedFPStrict to hold constrained FP intrinsic nodes without
and with fpexcept.strict markers. This allows not only to solve the above
problem, but also to relax chains a bit further by no longer flushing all
FP nodes before a store or other memory access. (They are still flushed
before nodes with other side effects.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72341
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
Summary:
This patch will provide support for auto return type for the C++ member
functions. Before this return type of the member function is deduced and
stored in the DIE.
This patch includes llvm side implementation of this feature.
Patch by: Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: dblaikie, aprantl, shafik, alok, SouraVX, jini.susan.george
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D70524
.section name, "flags"G, @type, GroupName[, linkage]
As of binutils 2.33, linkage cannot be 'unique'. For integrated
assembler, we use both 'o' flag and 'unique' linkage to support
--gc-sections and COMDAT with lld.
https://sourceware.org/ml/binutils/2019-11/msg00266.html
Current implementation of BaseMemOpsClusterMutation is a little bit
obscure. This patch directly uses a map from store chain ID to set of
memory instrs to make it simpler, so that future improvements are easier
to read, update and review.
Reviewed By: evandro
Differential Revision: https://reviews.llvm.org/D72070
Custom legalization can produce MERGE_VALUES to return multiple
results. We can expand them immediately instead of leaving them
around for DAG combine to clean up.
Some of the simplest handlers just call TLI and if that fails,
they fall back to unrolling. For those just inline the TLI call
and share the unrolling call with the default case of Expand.
For ExpandFSUB and ExpandBITREVERSE so that its obvious they
don't return results sometimes and want to defer to LegalizeDAG.
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
This reverts the AMDGPU DAG mutation implemented in D72487 and gives
a more general way of adjusting BUNDLE operand latency.
It also replaces FixBundleLatencyMutation with adjustSchedDependency
callback in the AMDGPU, fixing not only successor latencies but
predecessors' as well.
Differential Revision: https://reviews.llvm.org/D72535
ONE is currently softened to OGT | OLT. But the libcalls for OGT and OLT libcalls will trigger an exception for QNAN. At least for X86 with libgcc. UEQ on the other hand uses UO | OEQ. The UO and OEQ libcalls will not trigger an exception for QNAN.
This patch changes ONE to use the inverse of the UEQ lowering. So we now produce O & UNE. Technically the existing behavior was correct for a signalling ONE, but since I don't know how to generate one of those from clang that seemed like something we can deal with later as we would need to fix other predicates as well. Also removing spurious exceptions seemed better than missing an exception.
There are also problems with quiet OGT/OLT/OLE/OGE, but those are harder to fix.
Differential Revision: https://reviews.llvm.org/D72477
This system wasn't very well designed for multi-result nodes. As
a consequence they weren't consistently registered in the
LegalizedNodes map leading to nodes being revisited for different
results.
I've removed the "Result" variable from the main LegalizeOp method
and used a SDNode* instead. The result number from the incoming
Op SDValue is only used for deciding which result to return to the
caller. When LegalizeOp is called it should always register a
legalized result for all of its results. Future calls for any other
result should be pulled for the LegalizedNodes map.
Legal nodes will now register all of their results in the map
instead of just the one we were called for.
The Expand and Promote handling to use a vector of results similar
to LegalizeDAG. Each of the new results is then re-legalized and
logged in the LegalizedNodes map for all of the Results for the
node being legalized. None of the handles register their own
results now. And none call ReplaceAllUsesOfValueWith now.
Custom handling now always passes result number 0 to LowerOperation.
This matches what LegalizeDAG does. Since the introduction of
STRICT nodes, I've encountered several issues with X86's custom
handling being called with an SDValue pointing at the chain and
our custom handlers using that to get a VT instead of result 0.
This should prevent us from having any more of those issues. On
return we will update the LegalizedNodes map for all results so
we shouldn't call the custom handler again for each result number.
I want to push SDNode* further into the Expand and Promote
handlers, but I've left that for a follow to keep this patch size
down. I've created a dummy SDValue(Node, 0) to keep the handlers
working.
Differential Revision: https://reviews.llvm.org/D72224
The Linux kernel uses -fpatchable-function-entry to implement DYNAMIC_FTRACE_WITH_REGS
for arm64 and parisc. GCC 8 implemented
-fpatchable-function-entry, which can be seen as a generalized form of
-mnop-mcount. The N,M form (function entry points before the Mth NOP) is
currently only used by parisc.
This patch adds N,0 support to AArch64 codegen. N is represented as the
function attribute "patchable-function-entry". We will use a different
function attribute for M, if we decide to implement it.
The patch reuses the existing patchable-function pass, and
TargetOpcode::PATCHABLE_FUNCTION_ENTER which is currently used by XRay.
When the integrated assembler is used, __patchable_function_entries will
be created for each text section with the SHF_LINK_ORDER flag to prevent
--gc-sections (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93197) and
COMDAT (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93195) issues.
Retrospectively, __patchable_function_entries should use a PC-relative
relocation type to avoid the SHF_WRITE flag and dynamic relocations.
"patchable-function-entry"'s interaction with Branch Target
Identification is still unclear (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424 for GCC discussions).
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72215
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
As an intermediate step, some TLI functions can be converted to using
LLT instead of MVT. Move this somewhere out of GlobalISel so DAG
functions can use these.
If we're doing a compare that only tests the sign bit and only the sign bit is demanded, we can just bypass the node. This removes one of the blend dependencies in our v2i64->v2f32 uint_to_fp codegen on pre-sse4.2 targets.
Differential Revision: https://reviews.llvm.org/D72356
If we are extracting a chunk of a vector that's a fraction of an
operand of the concatenated vector operand, we can extract directly
from one of those original operands.
This is another suggestion from PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024#c2
But I'm not sure yet if it will make any difference on those patterns.
It seems to help a few existing AVX512 tests though.
Differential Revision: https://reviews.llvm.org/D72361
After expanding the pseudo instructions, update the liveness info.
We do this in a post-order traversal of the loop, including its
exit blocks and preheader(s).
Differential Revision: https://reviews.llvm.org/D72131
This is a positive combination as long as the NEG is NOT free,
as we are reducing the number of NEG from two to one.
Differential Revision: https://reviews.llvm.org/D72312
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
MachineVerifier::visitMachineFunctionAfter() is extended to check the
live-through case for live-in lists. This is only done for registers without
aliases and that are neither allocatable or reserved, such as the SystemZ::CC
register.
The MachineVerifier earlier only catched the case of a live-in use without an
entry in the live-in list (as "using an undefined physical register").
A comment in LivePhysRegs.h has been added stating a guarantee that
addLiveOuts() can be trusted for a full register both before and after
register allocation.
Review: Quentin Colombet
Differential Revision: https://reviews.llvm.org/D68267
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and base address as a FI operand when
possible. This is needed to simplify recognizing an STGloop instruction
as operating on a stack slot post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
This patch moves `InPQueue` into function arguments instead of template
arguments of `releaseNode`, which is a cleaner approach.
Differential Revision: https://reviews.llvm.org/D72125
Summary:
This patch relands D71271. The problem with D71271 is that it has cyclic dependency:
CodeGen->AsmPrinter->DebugInfoDWARF->CodeGen. To avoid cyclic dependency this patch
puts implementation for DWARFOptimizer into separate library: lib/DWARFLinker.
Thus the difference between this patch and D71271 is in that DWARFOptimizer renamed into
DWARFLinker and it`s files are put into lib/DWARFLinker.
Reviewers: JDevlieghere, friss, dblaikie, aprantl
Reviewed By: JDevlieghere
Subscribers: thegameg, merge_guards_bot, probinson, mgorny, hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D71839
Jay Foad