Even on AVX1 we can pretty cheaply (VPERM2F128+VSHUFPD) permute a single v4f64/v4i64 input (on AVX2 its just a single VPERMPD), followed by a BLENDPD.
llvm-svn: 354729
r354363 caused https://crbug.com/934963#c1, which has a plain C reduced
test case.
I also had to revert some dependent changes:
- r354648
- r354647
- r354640
- r354511
llvm-svn: 354713
If the the input type will be promoted to 128 bits its better to put a sign_extend_inreg/and in the 128 bit register before the split occurs. Otherwise we end up doing it on each half in the wider register.
Some of the overflow arithmetic tests are regressions, but I think we can make some improvement using getSetccResultType in DAG combine and/or type legalization.
llvm-svn: 354709
As discussed in:
D56864
D58197
Always use the narrow (128-bit) instruction when possible.
We already had the signed int version of this transform.
llvm-svn: 354675
Only the 1st fold is attempted pre-legalization, but it requires
legal (simple) types too, so we don't need an EVT in any of the code.
llvm-svn: 354674
This is a follow-up to D56864.
If we're extracting from a non-zero index before casting to FP,
then shuffle the vector and optionally narrow the vector before doing the cast:
cast (extelt V, C) --> extelt (cast (extract_subv (shuffle V, [C...]))), 0
This might be enough to close PR39974:
https://bugs.llvm.org/show_bug.cgi?id=39974
Differential Revision: https://reviews.llvm.org/D58197
llvm-svn: 354619
We currently bail if the target shuffle decodes to more than 2 input vectors, this change alters the input index to work for any number of inputs for when we drop that requirement.
llvm-svn: 354575
Second part of https://bugs.llvm.org/show_bug.cgi?id=40442.
This adds an extra UnrollVectorOverflowOp() method to SDAG, because
the general UnrollOverflowOp() method can't deal with multiple results.
Additionally we need to expand UMULO/SMULO during vector op
legalization, as it may result in unrolling, which may need additional
type legalization.
Differential Revision: https://reviews.llvm.org/D57997
llvm-svn: 354513
We currently bail if the target shuffle decodes to more than 2 input vectors, this is some initial cleanup that still has the limit but generalizes the opindices to an array that will be necessary when we drop the limit.
llvm-svn: 354489
D42042 introduced the ability for the ExecutionDomainFixPass to more easily change between BLENDPD/BLENDPS/PBLENDW as the domains required.
With this ability, we can avoid most bitcasts/scaling in the DAG that was occurring with X86ISD::BLENDI lowering/combining, blend with the vXi32/vXi64 vectors directly and use isel patterns to lower to the float vector equivalent vectors.
This helps the shuffle combining and SimplifyDemandedVectorElts be more aggressive as we lose track of fewer UNDEF elements than when we go up/down through bitcasts.
I've introduced a basic blend(bitcast(x),bitcast(y)) -> bitcast(blend(x,y)) fold, there are more generalizations I can do there (e.g. widening/scaling and handling the tricky v16i16 repeated mask case).
The vector-reduce-smin/smax regressions will be fixed in a future improvement to SimplifyDemandedBits to peek through bitcasts and support X86ISD::BLENDV.
Reapplied after reversion at rL353699 - AVX2 isel fix was applied at rL354358, additional test at rL354360/rL354361
Differential Revision: https://reviews.llvm.org/D57888
llvm-svn: 354363
This patch adds scalar/subvector BROADCAST handling to EltsFromConsecutiveLoads.
It mainly shows codegen changes to 32-bit code which failed to handle i64 loads, although 64-bit code is also using this new path to more efficiently combine to a broadcast load.
Differential Revision: https://reviews.llvm.org/D58053
llvm-svn: 354340
The motivating x86 cases for forming the intrinsic are shown in PR31754 and PR40487:
https://bugs.llvm.org/show_bug.cgi?id=31754https://bugs.llvm.org/show_bug.cgi?id=40487
..and those are shown in the IR test file and x86 codegen file.
Matching the usubo pattern is harder than uaddo because we have 2 independent values rather than a def-use.
This adds a TLI hook that should preserve the existing behavior for uaddo formation, but disables usubo
formation by default. Only x86 overrides that setting for now although other targets will likely benefit
by forming usbuo too.
Differential Revision: https://reviews.llvm.org/D57789
llvm-svn: 354298
Similar to D57867 - this is a small patch with lots of test diffs.
With half-vector-width narrowing potential, using an extract + 128-bit vshufps
is a win because it replaces a 256-bit shuffle with a 128-bit shufle.
This seems like it should be a win even for targets with 'fast-variable-shuffle',
but we are intentionally deferring that to an independent change to make sure
that is true.
Differential Revision: https://reviews.llvm.org/D58181
llvm-svn: 354279
No need for a separate stack slot. The lifetimes don't overlap.
Also fix the MachinePointerInfo for the final load after the integer conversion to indicate it came from the stack slot.
llvm-svn: 354234
No need to manually split everything. We can let the type legalizer work for us.
The test change seems to be caused by some DAG ordering issue that was previously circumventing a one use check in LowerSELECT where FP selects are turned into blends if the setcc has one use. But it was running after an integer select and the same setcc had been legalized to cmov and X86SISD::CMP. This dropped the use count of the setcc, but wasn't what was intended.
llvm-svn: 354197
When we need to do an fp->int conversion using x87 instructions, we need to temporarily change the rounding mode to 0b11 and perform a store. To do this we save the old value of the fpcw to the stack, then set the fpcw to 0xc7f, do the store, then restore fpcw. But the 0xc7f value forces the exception mask bits 1. While this is what they would be in the default FP environment, as we move to support changing the FP environments, we shouldn't make this assumption.
This patch changes the code to explicitly OR 0xc00 with the old value so that only the rounding mode is changed. Unfortunately, this requires two stack temporaries instead of one. One to hold the old value and one to hold the new value. Without two stack temporaries we would need an additional GPR. We already need one to do the OR operation in. This is similar to what gcc and icc do for this operation. Though they are both better at reusing the stack temporaries when there are multiple truncates in a function(or at least in a basic block)
Differential Revision: https://reviews.llvm.org/D57788
llvm-svn: 354178
These checks aren't needed on the call to FP_TO_INTHelper from the type legalizer for splitting i64. We always want to use X87 FIST/FISTT to memory there.
Moving up the SSE checks will allow this routine to focus on what it cares about and makes its return semantics cleaner.
llvm-svn: 354161
As detailed on PR40730, we are not correctly filling in the lane shuffle mask (D53148/rL344446) - we fill in for the correct src lane but don't add it to the correct mask element, so any reference to the correct element is likely to see an UNDEF mask index.
This allows constant folding to propagate UNDEFs prior to the lane mask being (correctly) lowered to vperm2f128.
This patch fixes the issue by fully populating the lane shuffle mask - this is more than is necessary (if we only filled in the required mask elements we might be able to match other shuffle instructions - broadcasts etc.), but its the most cautious approach as this needs to be cherrypicked into the 8.0.0 release branch.
Differential Revision: https://reviews.llvm.org/D58237
llvm-svn: 354117
When SSE is enabled sint_to_fp with i16 is blindly promoted to i32, but that changes the behavior of f80 conversion.
Move the promotion to i16 to LowerFP_TO_INT so we can limit it based on the floating point type.
llvm-svn: 354003
In 64-bit mode prior to avx512 we use Expand, but with avx512 we need to make f32/f64 conversions Legal so we use Custom and then do our own expansion for f80. But this seems to produce codegen differences relative to avx2. This patch corrects this.
llvm-svn: 353921
-Pull the final stack load creation from the two callers into the helper.
-Return a single SDValue instead of a std::pair.
-Remove the Replace flag which isn't really needed.
llvm-svn: 353920
A more limited version of rL352997 that had to be disabled in rL353198 - allow extension of any 128/256/512 bit vector that at least uses byte sized scalars.
llvm-svn: 353860
We were using DstTy, but that represents the integer type we are converting to which is i64 in this
case. The FLD is part of an intermediate step to get from the SSE registers to the x87 registers.
If the floating point type is f32, the memory operand should reflect a 4 byte access not an 8 byte
access. The store we used to get from SSE to the stack is using the corect size.
While there, consistenly use TheVT in place of Op.getOperand(0).getValueType() throughout the function.
llvm-svn: 353745
256-bit horizontal math ops are an x86 monstrosity (and thankfully have
not been extended to 512-bit AFAIK).
The two 128-bit halves operate on separate halves of the inputs. So if we
don't demand anything in the upper half of the result, we can extract the
low halves of the inputs, do the math, and then insert that result into a
256-bit output.
All of the extract/insert is free (ymm<-->xmm), so we're left with a
narrower (cheaper) version of the original op.
In the affected tests based on:
https://bugs.llvm.org/show_bug.cgi?id=33758https://bugs.llvm.org/show_bug.cgi?id=38971
...we see that the h-op narrowing can result in further narrowing of other
math via existing generic transforms.
I originally drafted this patch as an exact pattern match starting from
extract_vector_elt, but I thought we might see diffs starting from
extract_subvector too, so I changed it to a more general demanded elements
solution. There are no extra existing regression test improvements from
that switch though, so we could go back.
Differential Revision: https://reviews.llvm.org/D57841
llvm-svn: 353641
As discussed on D57389, this is a first step towards moving the SHLD/SHRD matching code to DAGCombiner using FSHL/FSHR instead.
There's a bit of work to do before I can do that, so this just folds to FSHL/FSHR in the existing code (handling the different SHRD/FSHR argument ordering), which fixes the issue we had with i16 shift amounts not being correctly masked.
llvm-svn: 353626
D42042 introduced the ability for the ExecutionDomainFixPass to more easily change between BLENDPD/BLENDPS/PBLENDW as the domains required.
With this ability, we can avoid most bitcasts/scaling in the DAG that was occurring with X86ISD::BLENDI lowering/combining, blend with the vXi32/vXi64 vectors directly and use isel patterns to lower to the float vector equivalent vectors.
This helps the shuffle combining and SimplifyDemandedVectorElts be more aggressive as we lose track of fewer UNDEF elements than when we go up/down through bitcasts.
I've introduced a basic blend(bitcast(x),bitcast(y)) -> bitcast(blend(x,y)) fold, there are more generalizations I can do there (e.g. widening/scaling and handling the tricky v16i16 repeated mask case).
The vector-reduce-smin/smax regressions will be fixed in a future improvement to SimplifyDemandedBits to peek through bitcasts and support X86ISD::BLENDV.
Differential Revision: https://reviews.llvm.org/D57888
llvm-svn: 353610
Move the (add (umax X, C), -C) --> (usubsat X, C) X86 combine into generic DAGCombiner
First of a number of saturated arithmetic folds that can be moved out of X86-specific code for PR40111.
Differential Revision: https://reviews.llvm.org/D57754
llvm-svn: 353457
This is intentionally a small step because it's hard to know exactly
where we might introduce a conflicting transform with the code that
tries to form wider shuffles. But I think this is safe - if we have
a wide shuffle with 2 operands, then we should do better with an
extract + narrow shuffle.
Differential Revision: https://reviews.llvm.org/D57867
llvm-svn: 353427
combineExtractWithShuffle may leave a dangling bitcast which may
prevent further optimization in later passes. Avoid constructing it
unless it is used.
llvm-svn: 353333
The proposal in D56796 may cross the line because we're trying to avoid vectorization
transforms in generic DAG combining. So this is an alternate, later, x86-specific
translation of that patch.
There are several potential follow-ups to enhance this:
1. Allow extraction from non-zero element index.
2. Peek through extends of smaller width integers.
3. Support x86-specific conversion opcodes like X86ISD::CVTSI2P
Differential Revision: https://reviews.llvm.org/D56864
llvm-svn: 353302
rL352997 enabled ZERO_EXTEND from non-shuffle-able value types. I've disabled it for now to fix a regression identified by @asbirlea until I can fix this properly.
llvm-svn: 353198
If we have broadcasts of different vector widths, keep the longest vector width and extract subvectors for the shorter vectors (which should be free).
Differential Revision: https://reviews.llvm.org/D57663
llvm-svn: 353154
Summary:
We don't currently map these constraints to physical register numbers so they don't make it to the MachineIR representation of inline assembly.
This could have problems for proper dependency tracking in the machine schedulers though I don't have a test case that shows that.
Reviewers: rnk
Reviewed By: rnk
Subscribers: eraman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57641
llvm-svn: 353141
For PCMPGT(0, X) patterns where we only demand the sign bit (e.g. BLENDV or MOVMSK) then we can use X directly.
Differential Revision: https://reviews.llvm.org/D57667
llvm-svn: 353051
Summary:
Add an additional combine to combineCarryThroughADD to reverse it back to the C flag to avoid regressions.
I believe this catches the cases that D57547 got.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57637
llvm-svn: 352984
Push the insert_subvector up through the shuffle operands to help find more cross-lane shuffles.
The is exposes a couple of minor issues that will be fixed shortly:
Missed broadcast folds - we have a mixture of vzext_load lengths that need cleaning up
combine-sdiv.ll - AVX1 SimplifyDemandedVectorElts failure (hits max depth due to a couple of extra bitcasts).
llvm-svn: 352963
We already have the getConstantOperandVal helper which returns a uint64_t, but along comes the fuzzer and inserts a i128 -1 constant or something and the whole thing asserts.......
I've updated a few obvious cases, and tried to make use of the const reference where possible, but there's more to do. A number of existing oss-fuzz tickets should be fixed if we start using APInt and perform value clamping where necessary.
llvm-svn: 352961
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
As suggested on PR40318, this patch uses PSLLDQ/PSRLDQ to lower shuffles to zero out the ends of a vector, leaving a sequential inner section.
For pre-SSSE3 we do this for shuffles with zeros at either end (requiring up to 3 shifts), but once PSHUFB is available I've limited this to shuffles with a single zeroable end (2 shifts).
Differential Revision: https://reviews.llvm.org/D56784
llvm-svn: 352883
Enable peeking through one use bitcasts to the subvector shuffle.
This still depends on the subvector being the same scalar-size but D57514 has already helped with the more tricky patterns
llvm-svn: 352879
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
Similar to what we already do in DAGCombiner, but this version also handles bitcasts from types with different scalar sizes, which x86 is better at handling.
Differential Revision: https://reviews.llvm.org/D57514
llvm-svn: 352773
Enables 32/64-bit scalar load broadcasts on AVX1 targets
The extractelement-load.ll regression will be fixed shortly in a followup commit.
llvm-svn: 352743
If we're not inserting the broadcast into the lowest subvector then we can avoid the insertion by just performing a larger broadcast.
Avoids a regression when we enable AVX1 broadcasts in shuffle combining
llvm-svn: 352742
I believe this was there to handle avx512bw intrinsics that returned i64 type in 32-bit mode. But all those intrinsics have since been changed to v64i1 results or replaced with generic IR.
llvm-svn: 352698
Without the fix we get the following (with -Werror):
../lib/Target/X86/X86ISelLowering.cpp:14181:58: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
SmallVector<std::array<int, 2>, 2> LaneSrcs(NumLanes, {-1, -1});
^~~~~~
{ }
1 error generated.
llvm-svn: 352455
This did not cause the buildbot failure it was previously reverted for.
Original commit message:
I'm not sure why we were using SEXTLOAD. EXTLOAD seems more appropriate since we don't care about the upper bits.
This patch changes this and then modifies the X86 post legalization combine to emit a extending shuffle instead of a sign_extend_vector_inreg. Could maybe use an any_extend_vector_inre
On AVX512 targets I think we might be able to use a masked vpmovzx and not have to expand this at all.
llvm-svn: 352433
First step towards adding support for 64-bit unary "sublane" handling (a bit like lowerShuffleAsRepeatedMaskAndLanePermute).
This allows us to add lowerV64I8Shuffle handling.
llvm-svn: 352389
This is tricky to make optimal: sometimes we're better off using
a single wider op, but other times it makes more sense to combine
a narrow ops to achieve the same result.
This solves the case from:
https://bugs.llvm.org/show_bug.cgi?id=40434
There's potentially a similar change for vectors with 64-bit elements,
but it needs adjustments similar to rL352333 to avoid creating infinite
loops.
llvm-svn: 352380
This transform was added with rL351346, and we had
an escape for shufps, but we also want one for
unpckps vs. vpermps because vpermps doesn't take
an immediate shuffle index operand.
llvm-svn: 352333
Although this is longer code, this is no-functional-change-intended.
The goal is to untangle the conditions under which we bail out, so
that's easier to adjust.
llvm-svn: 352320
Fix issue noted in D57281 that only tested the one use for the SDValue (the result flag), not the entire SUB.
I've added the getNode() to make it clearer what is intended than just the -> redirection.
llvm-svn: 352291
As discussed on PR24545, we should try to commute X86::COND_A 'icmp ugt' cases to X86::COND_B 'icmp ult' to more optimally bind the carry flag output to a SBB instruction.
Differential Revision: https://reviews.llvm.org/D57281
llvm-svn: 352289
We often generate X86ISD::SBB(X, 0) for carry flag arithmetic.
I had tried to create test cases for the ADC equivalent (which often uses the same pattern) but haven't managed to find anything yet.
Differential Revision: https://reviews.llvm.org/D57169
llvm-svn: 352288
This reduces a bit of duplication between the combining and
lowering places that use it, but the primary motivation is
to make it easier to rearrange the lowering logic and solve
PR40434:
https://bugs.llvm.org/show_bug.cgi?id=40434
llvm-svn: 352280
Summary: We have isel patterns for this, but we're missing some load patterns and all broadcast patterns. A DAG combine seems like a better fit for this.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56971
llvm-svn: 352260
Summary:
I'm not sure why we were using SEXTLOAD. EXTLOAD seems more appropriate since we don't care about the upper bits.
This patch changes this and then modifies the X86 post legalization combine to emit a extending shuffle instead of a sign_extend_vector_inreg. Could maybe use an any_extend_vector_inreg, but I just did what we already do in LowerLoad. I think we can actually get rid of this code entirely if we switch to -x86-experimental-vector-widening-legalization.
On AVX512 targets I think we might be able to use a masked vpmovzx and not have to expand this at all.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57186
llvm-svn: 352255
We also need to combine to masked truncating with saturation stores, but I'm leaving that for a future patch.
This does regress some tests that used truncate wtih saturation followed by a masked store. Those now use a truncating store and use min/max to saturate.
Differential Revision: https://reviews.llvm.org/D57218
llvm-svn: 352230
This seems unnecessarily complicated because we gave names to
opposite polarity bools and have code comments that don't really
line up with the logic.
Step 1: remove UndefUpper and assert that it is the opposite of
UndefLower after the initial early exit.
llvm-svn: 352217
Simplify to the generic ISD::ADD/SUB if we don't make use of the result flag.
This mainly helps with ADDCARRY/SUBBORROW intrinsics which get expanded to X86ISD::ADD/SUB but could be simplified further.
Noticed in some of the test cases in PR31754
Differential Revision: https://reviews.llvm.org/D57234
llvm-svn: 352210
This isn't the final fix for our reduction/horizontal codegen, but it takes care
of a lot of the problems. After we narrow the shuffle, existing combines for
insert/extract and binops kick in, and we end up with cheaper 128-bit ops.
The avg and mul reduction tests show an existing shuffle lowering hole for
AVX2/AVX512. I think in its most minimal form this is:
https://bugs.llvm.org/show_bug.cgi?id=40434
...but we might need multiple fixes to get it right.
Differential Revision: https://reviews.llvm.org/D57156
llvm-svn: 352209
As noted in D57156, we want to check at least part of
this pattern earlier (in combining), so this will allow
the code to be shared instead of duplicated.
llvm-svn: 352127
For constant bit select patterns, replace one AND with a ANDNP, allowing us to reuse the constant mask. Only do this if the mask has multiple uses (to avoid losing load folding) or if we have XOP as its VPCMOV can handle most folding commutations.
This also requires computeKnownBitsForTargetNode support for X86ISD::ANDNP and X86ISD::FOR to prevent regressions in fabs/fcopysign patterns.
Differential Revision: https://reviews.llvm.org/D55935
llvm-svn: 351819
Summary:
Use X86ISD::VFPROUND in the instruction isel patterns. Add new patterns for ISD::FP_ROUND to maintain support for fptrunc in IR.
In the process I found a couple duplicate isel patterns which I also deleted in this patch.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56991
llvm-svn: 351762
Summary:
For compress, a select node doesn't semantically reflect the behavior of the instruction. The mask would have holes in it, but the resulting write is to contiguous elements at the bottom of the vector.
Furthermore, as far as the compressing and expanding is concerned the behavior is depended on the mask. You can't just have an expand/compress node that only reads the input vector. That node would have no meaning by itself.
This all only works because we pattern match the compress/expand+select back to the instruction. But conceivably an optimization of the select could break the pattern and leave something meaningless.
This patch modifies the expand and compress node to take the mask and passthru as additional inputs and gets rid of the select all together.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57002
llvm-svn: 351761
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Right now we include ${TGT}GenCallingConv.inc once per each instruction
selection method implemented by ${TGT}:
- ${TGT}ISelLowering.cpp
- ${TGT}CallLowering.cpp
- ${TGT}FastISel.cpp
Instead, add a mechanism to tablegen for marking a particular convention
as "External", which causes tablegen to emit into the ::llvm namespace,
instead of as a static helper. This allows us to provide a header to
forward declare it, so we can simply call the function from all the
places it is referenced. Typically the calling convention analyzer is
called indirectly, so it doesn't benefit from inlining.
This saves a bit of final binary size, but mostly just saves object file
size:
before after diff artifact
12852K 12492K -360K X86ISelLowering.cpp.obj
4640K 4280K -360K X86FastISel.cpp.obj
1704K 2092K +388K X86CallingConv.cpp.obj
52448K 52336K -112K llc.exe
I didn't collect before numbers for X86CallLowering.cpp.obj, which is
for GlobalISel, but we should save 360K there as well.
This patch applies the strategy to the X86 backend, but there is no
reason it couldn't be applied to the other backends that implement
multiple ISel strategies, like AArch64.
Reviewers: craig.topper, hfinkel, efriedma
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D56883
llvm-svn: 351616
This sends these intrinsics through isel in a much more normal way. This should allow addressing mode matching in isel to make better use of the displacement field.
llvm-svn: 351583
This sends these intrinsics through isel in a much more normal way. This should allow addressing mode matching in isel to make better use of the displacement field.
Differential Revision: https://reviews.llvm.org/D56827
llvm-svn: 351570
Previously we used ISD::SHL and ISD::SRL to represent these in SelectionDAG. ISD::SHL/SRL interpret an out of range shift amount as undefined behavior and will constant fold to undef. While the intrinsics are defined to return 0 for out of range shift amounts. A previous patch added a special node for VPSRAV to produce all sign bits.
This was previously believed safe because undefs frequently get turned into 0 either from the constant pool or a desire to not have a false register dependency. But undef is treated specially in some optimizations. For example, its ignored in detection of vector splats. So if the ISD::SHL/SRL can be constant folded and all of the elements with in bounds shift amounts are the same, we might fold it to single element broadcast from the constant pool. This would not put 0s in the elements with out of bounds shift amounts.
We do have an existing InstCombine optimization to use shl/lshr when the shift amounts are all constant and in bounds. That should prevent some loss of constant folding from this change.
Patch by zhutianyang and Craig Topper
Differential Revision: https://reviews.llvm.org/D56695
llvm-svn: 351381
This cleans up the duplication we have with both intrinsic isel patterns and vselect isel patterns. This should also allow the intrinsics to get SimplifyDemandedBits support for the condition.
I've switched the canonical pattern in isel to use the X86ISD::BLENDV node instead of VSELECT. Since it always seemed weird to move from BLENDV with its relaxed rules on condition bits to VSELECT which has strict rules about all bits of the condition element being the same. Its more correct to go from VSELECT to BLENDV.
Differential Revision: https://reviews.llvm.org/D56771
llvm-svn: 351380
If we're going to generate a new inverted setcc, we should make sure we will be able to remove the old setcc.
Differential Revision: https://reviews.llvm.org/D56765
llvm-svn: 351378
Remove the existing assertion and just return false for unexpected shuffle value types (<X x i1> mainly....).
Found while updating combineX86ShufflesRecursively to run within SimplifyDemandedVectorElts/SimplifyDemandedBits.
llvm-svn: 351365
combineX86ShufflesRecursively is pretty cumbersome with a lot of arguments that only matter later in recursion.
This commit adds a wrapper version that only takes the initial root Op to simplify calls that don't need to worry about these.
An early, cleanup step towards merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts/SimplifyDemandedBits.
llvm-svn: 351352
I was trying to prevent shuffle regressions while matching more horizontal ops
and ended up here:
shuf (extract X, 0), (extract X, 4), Mask --> extract (shuf X, undef, Mask'), 0
The affected tests were added for:
https://bugs.llvm.org/show_bug.cgi?id=34380
This patch won't change the examples in the bug report itself, but we should be
able to extend this to catch more types.
Differential Revision: https://reviews.llvm.org/D56756
llvm-svn: 351346
Summary:
Make recoverfp intrinsic target-independent so that it can be implemented for AArch64, etc.
Refer D53541 for the context. Clang counterpart D56748.
Reviewers: rnk, efriedma
Reviewed By: rnk, efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56747
llvm-svn: 351281
That's really what it is. If we didn't use intrinsics for BLENDVPS/BLENDVPD/PBLENDVB all the way to isel, this is the node we would use.
llvm-svn: 351278
We're trying to have the vXi1 types in IR as much as possible. This prevents the need for bitcasts when the producer of the mask was already a vXi1 value like an icmp. The bitcasts can be subject to code motion and interfere with basic block at a time isel in bad ways.
llvm-svn: 351275
In keeping with our general direction of having the vXi1 type present in IR, this patch converts the mask argument for avx512 gather to vXi1. This can avoid k-register to GPR to k-register transitions late in codegen.
I left the existing intrinsics behind because they have many out of tree users such as ISPC. They generate their own code and don't go through the autoupgrade path which only works for bitcode and ll parsing. Ideally we will get them to migrate to target independent intrinsics, but it might be easier for them to migrate to these new intrinsics.
I'll work on scatter and gatherpf/scatterpf next.
Differential Revision: https://reviews.llvm.org/D56527
llvm-svn: 351234
Modify getRegForInlineAsmConstraint to return special singleton
register class when a constraint references ST(7) not RFP80 for which
ST(7) is not a member.
llvm-svn: 351206
If we're shuffling with a zero vector, then we are better off not doing VECTOR_SHUFFLE(UNPCK()) as we lose track of those zero elements.
We were already doing this for SSSE3 targets as we have PSHUFB, but its worth doing for all targets.
llvm-svn: 351203
If we have PSHUFB and we're shuffling with a zero vector, then we are better off not doing VECTOR_SHUFFLE(UNPCK()) as we lose track of those zero elements.
llvm-svn: 351103
add (extractelt (X, 0), extractelt (X, 1)) --> extractelt (hadd X, X), 0
This is the integer sibling to D56011.
There's an additional restriction to only to do this transform in the
case where we don't have extra extracts from the source vector. Without
that, we can fail to match larger horizontal patterns that are more
beneficial than this minimal case. An improvement to the more general
h-op lowering may allow us to remove the restriction here in a follow-up.
llvm-svn: 351093
We can't represent this properly with vselect like we normally do. We also have to update the instruction definition to use a VK2WM mask instead of VK4WM to represent this.
Fixes another case from PR34877
llvm-svn: 351018
We can't represent this properly with vselect like we normally do. We also have to update the instruction definition to use a VK2WM mask instead of VK4WM to represent this.
Fixes another case from PR34877.
llvm-svn: 351017
This patch takes some of the code from D49837 to allow us to enable ISD::ABS support for all SSE vector types.
Differential Revision: https://reviews.llvm.org/D56544
llvm-svn: 350998
The 128-bit input produces 64-bits of output and fills the upper 64-bits with 0. The mask only applies to the lower elements. But we can't represent this with a vselect like we normally do.
This also avoids the need to have a special X86ISD::SELECT when avx512bw isn't enabled since vselect v8i16 isn't legal there.
Fixes another instruction for PR34877.
llvm-svn: 350994
We no longer need to extend mask scalars before bitcasting them to vXi1. This was only needed for the truncate intrinsics. And was really a bug in our lowering of them.
llvm-svn: 350991
We still use i8 for the load/store type. So we need to convert to/from i16 to around the mask type.
By doing this we get an i8->i16 extload which we can then pattern match to a KMOVW if the access is aligned.
llvm-svn: 350989
We can't properly represent this with a vselect since the upper elements of the result are supposed to be zeroed regardless of the mask.
This also reuses the new nodes even when the result type fits in 128 bits if the input is q/d and the result is w/b since vselect w/b using k-register condition isn't legal without avx512bw. Currently we're doing this even when avx512bw is enabled, but I might change that.
This fixes some of PR34877
llvm-svn: 350985
Previously, we limited this transform to cases where the
extraction into the build vector happens from vectors of
the same type as the build vector, but that's not required.
There's a slight potential regression seen in the AVX512
result for phadd -- we're using the 256-bit flavor of the
instruction now even though the 128-bit subset is sufficient.
The same problem could already be seen in the AVX2 result.
Follow-up patches will attempt to narrow that back down.
llvm-svn: 350928
We were lowering the last step extract_vector_elt to a bitcast+truncate. Change it to use an extract_vector_elt of index 0 instead. Add isel patterns to do the equivalent of what the bitcast would have done. Plus an isel pattern for an any_extend+extract to prevent some regressions.
Finally add a DAG combine to turn v1i1 scalar_to_vector+extract_vector_elt of 0 into an extract_subvector.
This fixes some of the regressions from D350800.
llvm-svn: 350918
This extends to combineVSelectToShrunkBlend to be able to resimplify SHRUNKBLENDS that have already been created.
This should help some of the regressions from D56387
Differential Revision: https://reviews.llvm.org/D56421
llvm-svn: 350875
Despite what the comment says, FCMP_UNE would be an OR not an AND. In the lowering code the first branch created still goes to the original destination. The second branch was exchanged to go to where the subsequent unconditional branch went. This is different than what we do for FCMP_OEQ where both branches that we create go to the original unconditional branch.
As far as I can tell, I think this means we don't need to exchange the branch target with the unconditional branch for FCMP_UNE at all.
Differential Revision: https://reviews.llvm.org/D56309
llvm-svn: 350873
When we use the partial-matching function on a 128-bit chunk, we must
account for the possibility that we've matched undef halves of the
original source vectors, so the outputs may need to be reset.
This should allow closing PR40243:
https://bugs.llvm.org/show_bug.cgi?id=40243
llvm-svn: 350830
This is a partial fix for:
https://bugs.llvm.org/show_bug.cgi?id=40243
...as seen in the integer test, we still need to correct the result when using the
existing (old) horizontal op matching function because it does not model the way
x86 256-bit horizontal ops return results (each 128-bit half is its own horizontal-op).
A potential follow-up change for that is discussed in the bug report - see also D56490.
This generally duplicates a lot of the existing matching code, but we can't just remove
that without introducing regressions, so the existing code is renamed and used less often.
Follow-ups may try to reduce that overlap.
Differential Revision: https://reviews.llvm.org/D56450
llvm-svn: 350826
Found while trying to figure out why my second version of D56421 worked better than the first version. We weren't deleting the vselect in a timely fashion and that caused SimplfyDemandedBit to see an additional user.
The new version doesn't have this problem so this fix isn't needed there, but seemed like the right thing to do.
llvm-svn: 350781
When the result type is v2i64/v2f64 and the index element size is i32, the index vector has two unused elements making the type v4i32. The mask VT should match the number of memory accesses that will be made.
This is consistent with the isel patterns used for the target independent gather/scatter intrinsic.
llvm-svn: 350687
Summary: AVX512VBMI2 supports a funnel shift by immediate and a funnel shift by a variable vector.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56361
llvm-svn: 350498
This is especially helpful on targets without avx512bw since we don't have a good way to convert from v16i8/v32i8 to v16i1/v32i1 for the truncate anyway. If we're just going to convert it to a GPR we might as well use pmovmskb to accomplish both.
llvm-svn: 350480
The 1st try for this was at rL350369, but it caused IR-level diffs because
our cost models differentiate custom vs. legal/promote lowering. So that was
reverted at rL350373. The cost models were fixed independently at rL350403,
so this is effectively the same patch as last time.
Original commit message:
This would show up if we fix horizontal reductions to narrow as they go along,
but it's an improvement for size and/or Jaguar (fast-hops) independent of that.
We need to do this late to not interfere with other pattern matching of larger
horizontal sequences.
We can extend this to integer ops in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D56011
llvm-svn: 350421
This would show up if we fix horizontal reductions to narrow as they go along,
but it's an improvement for size and/or Jaguar (fast-hops) independent of that.
We need to do this late to not interfere with other pattern matching of larger
horizontal sequences.
We can extend this to integer ops in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D56011
llvm-svn: 350369
As noted in PR39973 and D55558:
https://bugs.llvm.org/show_bug.cgi?id=39973
...this is a partial implementation of a fold that we do as an IR canonicalization in instcombine:
// extelt (binop X, Y), Index --> binop (extelt X, Index), (extelt Y, Index)
We want to have this in the DAG too because as we can see in some of the test diffs (reductions),
the pattern may not be visible in IR.
Given that this is already an IR canonicalization, any backend that would prefer a vector op over
a scalar op is expected to already have the reverse transform in DAG lowering (not sure if that's
a realistic expectation though). The transform is limited with a TLI hook because there's an
existing transform in CodeGenPrepare that tries to do the opposite transform.
Differential Revision: https://reviews.llvm.org/D55722
llvm-svn: 350354
INC/DEC are pretty much the same as ADD/SUB except that they don't update the C flag.
This patch removes the special nodes and just pattern matches from ADD/SUB during isel if the C flag isn't being used.
I had to avoid selecting DEC is the result isn't used. This will become a SUB immediate which will turned into a CMP later by optimizeCompareInstr. This lead to the one test change where we use a CMP instead of a DEC for an overflow intrinsic since we only checked the flag.
This also exposed a hole in our RMW flag matching use of hasNoCarryFlagUses. Our root node for the match is a store and there's no guarantee that all the flag users have been selected yet. So hasNoCarryFlagUses needs to check copyToReg and machine opcodes, but it also needs to check for the pre-match SETCC, SETCC_CARRY, BRCOND, and CMOV opcodes.
Differential Revision: https://reviews.llvm.org/D55975
llvm-svn: 350245
Peek through shift modulo masks while matching double shift patterns.
I was hoping to delay this until I could remove the X86 code with generic funnel shift matching (PR40081) but this will do for now.
Differential Revision: https://reviews.llvm.org/D56199
llvm-svn: 350222
All of these use custom isel so we can pretty easily detect the differences in the custom code in X86ISelDAGToDAG. The ISD opcodes just need to express the desired semantics not the details of how they would be selected by isel. So unifying them lets us remove the special casing from lowering.
llvm-svn: 350206
These require a different X86ISD node to be created than i16/i32/i64. I guess no one wanted to add the special code for that except in LowerXALUO. But now LowerXALUO, LowerSELECT, and LowerBRCOND all use a common helper function so they all share the special code.
Unfortunately, there are no test changes because we seem to correct the miss in a DAG combine later. I did verify it manually using test cases from xmulo.ll
llvm-svn: 350205
This makes it easier to keep the LowerBRCOND and LowerSELECT code in sync with LowerXALUO so they always pick the same operation for overflowing instructions.
This is inspired by the helper functions used by ARM and AArch64 for the same purpose.
The test change is because LowerSELECT was not in sync with LowerXALUO with regard to INC/DEC for SADDO/SSUBO.
llvm-svn: 350198
This seems to be getting in the way more than its helping. This does mean we stop scalarizing some cases, but I'm not convinced the scalarization was really better.
Some of the changes to vsel-cmp-load.ll are a regression but D56156 should fix it.
llvm-svn: 350159
This allows us to sign extend to v4i32 first. And then share that extension to implement the final steps to v4i64 using a pcmpgt and punpckl and punpckh.
We already do something similar for SIGN_EXTEND with -x86-experimental-vector-widening-legalization.
llvm-svn: 350158
This was tricking us into making these operations and then letting them get scalarized later. But I can't prove that the scalarized version is actually better.
llvm-svn: 350141
Previously we emitted a multiply and some masking that was supposed to matched to PMULUDQ, but the masking could sometimes be removed before we got a chance to match it. So instead just emit the PMULUDQ directly.
Remove the DAG combine that was added when the ReplaceNodeResults code was originally added. Add a new DAG combine to avoid regressions in shrink_vmul.ll
Some of the shrink_vmul.ll test cases now pick PMULUDQ instead of PMADDWD/PMULLD, but I think this should be an improvement on most CPUs.
I think all of this can go away if/when we switch to -x86-experimental-vector-widening-legalization
llvm-svn: 350134
Create PMULDQ/PMULUDQ as long as the number of elements is a power of 2.
This seems to give some improvements in our ability to use SimplifyDemandedBits.
llvm-svn: 350084
Make each of the helper functions only return their comparison node and the condition code. Leave X86ISD::SETCC creation to the LowerSETCC function itself.
Looking into whether we can use this code directly in BRCOND and SELECT lowering instead of going through LowerSETCC which creates an X86ISD::SETCC node we need to look through.
llvm-svn: 350082
Only one of the 3 callers of LowerAndToBT need the SETCC node. Two of them have to look through it to find the operands they really need. Instead create it after the one call that needs it.
LowerAndToBT now returns both the BT node and the X86 specific condition code separately.
llvm-svn: 350081
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
Remove the TESTmr isel patterns and add another postprocessing combine for TESTrr+ANDrm->TESTmr. We already have a postprocessing combine for TESTrr+ANDrr->TESTrr. With this we can give ANDN a chance to match first. And clean it up during post processing if we ended up with just a regular AND.
This is another step towards my plan to gut EmitTest and do more flag handling during isel matching or by using optimizeCompare.
llvm-svn: 350038
This is admittedly a narrow fix for the problem:
https://bugs.llvm.org/show_bug.cgi?id=37502
...but as the XOP restriction shows, it's a maze to get this right.
In the motivating example, note that we have movddup before SSE4.1 and
again with AVX2. That's because insertps isn't available pre-SSE41 and
vbroadcast is (more generally) available with AVX2 (and the splat is
reduced to movddup via isel pattern).
Differential Revision: https://reviews.llvm.org/D55898
llvm-svn: 349937
Migrate the X86 backend from X86ISD opcodes ADDS and SUBS to generic
ISD opcodes SADDSAT and SSUBSAT. This also improves scodegen for
@llvm.sadd.sat() and @llvm.ssub.sat() intrinsics.
This is a followup to D55787 and part of PR40056.
Differential Revision: https://reviews.llvm.org/D55833
llvm-svn: 349520
InstCombine seems to canonicalize or PSUB patter into a max with the cosntant and an add with an inverse of the constant.
This patch recognizes this pattern and turns it into PSUBUS. Future work could improve undef element handling.
Fixes some of PR40053
Differential Revision: https://reviews.llvm.org/D55780
llvm-svn: 349519
Replace the X86ISD opcodes ADDUS and SUBUS with generic ISD opcodes
UADDSAT and USUBSAT. As a side-effect, this also makes codegen for
the @llvm.uadd.sat and @llvm.usub.sat intrinsics reasonable.
This only replaces use in the X86 backend, and does not move any of
the ADDUS/SUBUS X86 specific combines into generic codegen.
Differential Revision: https://reviews.llvm.org/D55787
llvm-svn: 349481
(VSRAI (VSHLI X, C1), C1) --> X iff NumSignBits(X) > C1
This works better as part of SimplifyDemandedBits than part of the general combine.
llvm-svn: 349462
This fold was incredibly specific - replace with a SimplifyDemandedBits fold to remove a VSRAI if only the original sign bit is demanded (its guaranteed to stay the same).
Test change is merely a rescheduling.
llvm-svn: 349459
Convert VSRAI to VSRLI is the sign bit is known zero and improve KnownBits output for all shift instruction.
Fixes the poor codegen comments in D55768.
llvm-svn: 349407
This allows a TEST to be used and can be combined with any AND that may already exist as an input to the shift.
This was already done in EmitTest, but was easily tricked by multiple uses because the setcc might be used by multiple instructions. Once the SETCC and users are legalized then we can look for the shift to be used by a single CMP, but the CMP itself can have multiple users.
This appears to fix the case in PR39968.
llvm-svn: 349385
This is an initial patch to add the necessary support for a DemandedElts argument to SimplifyDemandedBits, more closely matching computeKnownBits and to help improve vector codegen.
I've added only a small amount of the changes necessary to get at least one test to update - a lot more can be done but I'd like to add these methodically with proper test coverage, at the same time the hope is to slowly move some/all of SimplifyDemandedVectorElts into SimplifyDemandedBits as well.
Differential Revision: https://reviews.llvm.org/D55768
llvm-svn: 349374
I'd like to try to move a lot of the flag matching out of EmitTest and push it to isel or isel preprocessing. This is a step towards that.
The test-shrink-bug.ll changie is an improvement because we are no longer interfering with test shrink handling in isel.
The pr34137.ll change is a regression, but the IR came from -O0 and was not reduced by InstCombine. So it contains a lot of redundancies like duplicate loads that made it combine poorly.
llvm-svn: 349315
Use consistent rules for when to lower to SHLD/SHRD for slow machines - fixes a weird issue where funnel shift gets expanded but then X86ISelLowering's combineOr sees the optsize and combines to SHLD/SHRD, but now with the modulo amount guard......
llvm-svn: 349285
Summary:
If the setcc already has the target desired type we can reach the getSetCC/getSExtOrTrunc after the MatchingVecType check with the exact same types as the nodes we started with. This causes those causes VsetCC to be CSEd to N0 and the getSExtOrTrunc will CSE to N. When we return N, the caller will think that meant we called CombineTo and did our own worklist management. But that's not what happened. This prevents target hooks from being called for the node.
To fix this, I've now returned SDValue if the setcc is already the desired type. But to avoid some regressions in X86 I've had to disable one of the target combines that wasn't being reached before in the case of a (sext (setcc)). If we get vector widening legalization enabled that entire function will be deleted anyway so hopefully this is only for the short term.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55459
llvm-svn: 349137
This requires the two callers to manifest a 0 to make EmitCmp call EmitTest.
I'm looking into changing how we combine TEST and flag setting instructions to not be part of lowering. And instead be part of DAG combine or isel. Which will mean EmitTest will probably become gutted and maybe disappear entirely.
llvm-svn: 349094
There's still a couple of minor SimplifyDemandedElts regressions in some of the shift amount splats that will be fixed in future patches.
llvm-svn: 349052
Move existing rotation expansion code into TargetLowering and set it up for vectors as well.
Ideally this would share more of the funnel shift expansion, but we handle the shift amount modulo quite differently at the moment.
Begun removing x86 vector rotate custom lowering to use the expansion.
llvm-svn: 349025
I'm hoping we can just replace SETCC_CARRY with SBB. This is another step towards that.
I've explicitly used zero as the input to the setcc to avoid a false dependency that we've had with the SETCC_CARRY. I changed one of the patterns that used NEG to instead use an explicit compare with 0 on the LHS. We needed the zero anyway to avoid the false dependency. The negate would clobber its input register. By using a CMP we can avoid that which could be useful.
Differential Revision: https://reviews.llvm.org/D55414
llvm-svn: 348959
This patch introduces a generic function to determine whether a given vector type is known to be a splat value for the specified demanded elements, recursing up the DAG looking for BUILD_VECTOR or VECTOR_SHUFFLE splat patterns.
It also keeps track of the elements that are known to be UNDEF - it returns true if all the demanded elements are UNDEF (as this may be useful under some circumstances), so this needs to be handled by the caller.
A wrapper variant is also provided that doesn't take the DemandedElts or UndefElts arguments for cases where we just want to know if the SDValue is a splat or not (with/without UNDEFS).
I had hoped to completely remove the X86 local version of this function, but I'm seeing some regressions in shift/rotate codegen that will take a little longer to fix and I hope to get this in sooner so I can continue work on PR38243 which needs more capable splat detection.
Differential Revision: https://reviews.llvm.org/D55426
llvm-svn: 348953
This should really be generalized to allow increment and/or
we should replace it by using ISD::matchUnaryPredicate().
See D55515 for context.
llvm-svn: 348776
Previously we had to take the carry in and add -1 to it to set the carry flag so we could use it with ADC/SBB. But if we know its 0 then we don't need to bother.
This should go a long way towards fixing PR24545.
llvm-svn: 348727
This addresses a FIXME and avoids depending on an isel pattern match I think. I've remove the isel patterns too since he have no lit tests left that cover them. Hopefully that really means they are unused.
I'm trying to decide if we need SETCC_CARRY. This removes one of its usages.
Differential Revision: https://reviews.llvm.org/D55355
llvm-svn: 348536
Initial step towards making the function more generic (and probably move into SelectionDAG).
This is necessary to avoid massive codegen bloat for PR38243 (Add modulo rotate support to LowerRotate).
llvm-svn: 348498
Prep work for PR38243 - mainly adding comments on where we need to add modulo support (doing so at the moment causes massive codegen regressions).
I've also consistently added support for modulo folding for uniform constants (although at the moment we have no way to trigger this) and removed the old assertions.
llvm-svn: 348366
This is an initial patch to add a minimum level of support for funnel shifts to the SelectionDAG and to begin wiring it up to the X86 SHLD/SHRD instructions.
Some partial legalization code has been added to handle the case for 'SlowSHLD' where we want to expand instead and I've added a few DAG combines so we don't get regressions from the existing DAG builder expansion code.
Differential Revision: https://reviews.llvm.org/D54698
llvm-svn: 348353
PR17686 demonstrates that for some targets FP exceptions can fire in cases where the FP_TO_UINT is expanded using a FP_TO_SINT instruction.
The existing code converts both the inrange and outofrange cases using FP_TO_SINT and then selects the result, this patch changes this for 'strict' cases to pre-select the FP_TO_SINT input and the offset adjustment.
The X87 cases don't need the strict flag but generates much nicer code with it....
Differential Revision: https://reviews.llvm.org/D53794
llvm-svn: 348251
We only needed this because it provided really aggressive constant folding even through constant pool entries created from build_vectors. The main case was for vXi8 MULH legalization which was happening as part of legalize DAG instead of as part of legalize vector ops. Now its part of vector op legalization and we've added special handling for build vectors of all constants there. This has removed the need for this code on the list tests we have.
llvm-svn: 348237
This is the smallest vector enhancement I could find to D54640.
Here, we're allowing narrowing to only legal vector ops because we'll see
regressions without that. All of the test diffs are wins from what I can tell.
With AVX/AVX512, we can shrink ymm/zmm ops to xmm.
x86 vector multiplies are the problem case that we're avoiding due to the
patchwork ISA, and it's not clear to me if we can dance around those
regressions using TLI hooks or if we need preliminary patches to plug those
holes.
Differential Revision: https://reviews.llvm.org/D55126
llvm-svn: 348195
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
Previously this code generated its own extracts and build_vector. But we can use a simpler concat_vectors or scalar_to_vector operation and let type legalization do additional legalization of those operations.
llvm-svn: 348087
The generic legalizer will fall back to a stack spill that uses a truncating store. That store will get expanded into a shuffle and non-truncating store on pre-avx512 targets. Once that happens the stack store/load pair will be combined away leaving behind the shuffle and bitcasts. On avx512 targets the truncating store is legal so doesn't get folded away.
By custom legalizing it we can avoid this churn and maybe produce better code.
llvm-svn: 348085
Summary: With sse4.1 we use two zero_extend_vector_inreg and a pshufd to expand the v16i8 input into two v8i16 vectors for the multiply. That's 3 shuffles to extend one operand. The other operand is usually constant as this is mostly used by division by constant optimization. Pre sse4.1 we use a punpckhbw and a punpcklbw with a zero vector. That's two shuffles and an xor and a copy due to tied register constraints. That seems maybe better than the 3 shuffles. With AVX we avoid the copy so that's obviously better.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55138
llvm-svn: 348079
This reduces the number of shuffle operations that need to be done. The splitting strategy requires the shuffle unit for the extraction and the extension. With the unpack strategy the unpacks accomplish a splitting and extending in one operation.
llvm-svn: 348019
This does require a constant pool load instead of loading an immediate into a gpr, moving to a k register and masking. But its less instructions and more consistent with previous ISAs. It probably opens up more combine opportunities as one of the test cases demonstrates.
llvm-svn: 348018
Previously we emitted a punpcklbw/punpckhbw to move the byte elements into the upper half of 16 bit elements then shifted right by 8 to zero the upper bits. After DAG combine we end up with punpcklbw/punpckhbw into the lower bits with zeros in the uppers bits and no shifts. So just emit that directly.
llvm-svn: 347966
We had a EVT variable capturing the result of getSimpleValueType which returns an MVT. Another place using EVT that could have been MVT. And an 'int' that should be 'unsigned'.
llvm-svn: 347959
I believe we should be legalizing these with the rest of vector binary operations. If any custom lowering is required for these nodes, this will give the DAG combine between LegalizeVectorOps and LegalizeDAG to run on the custom code before constant build_vectors are lowered in LegalizeDAG.
I've moved MULHU/MULHS handling in AArch64 from Lowering to isel. Moving the lowering earlier caused build_vector+extract_subvector simplifications to kick in which made the generated code worse.
Differential Revision: https://reviews.llvm.org/D54276
llvm-svn: 347902
This is another patch for -x86-experimental-vector-widening. This pre widens narrow division by constants so that we can get pass the legal type check in the generic DAG combiner. Otherwise we end up scalarizing.
I've restricted this to splats for now because it was easy to just call DAG.getConstant. Not sure what we should do for non-splat? Increase the element size?Widen the constant vector by padding with 1?
Differential Revision: https://reviews.llvm.org/D54919
llvm-svn: 347898
This failed to select (which might be a separate bug) in
X86ISelDAGToDAG because we try to create a select node
that can be simplified away after rL347227.
This change avoids the problem by simplifying the SHRUNKBLEND
node sooner. In the test case, we manage to realize that the
true/false values of the select (SHRUNKBLEND) are the same thing,
so it simplifies away completely.
llvm-svn: 347818
Expansion of SIGN_EXTEND_INREG can create a VSRAI instruction. If there is already a VSRAI after it, we should combine them into a larger VSRAI
Differential Revision: https://reviews.llvm.org/D54959
llvm-svn: 347784
We're already mixing this APInt with other 'unsigned' variables. This allows us to use regular comparison operators instead of needing to use APInt::ult or APInt::uge. And it removes a later conversion from APInt to unsigned.
I might be adding another combine to this function and this will probably simplify the logic required for that.
llvm-svn: 347684
If we fold the bitcast into the store we'll end up creating a truncating store to vXi1 that will get scalarized. Instead allow the bitcast to be turned into a movmsk.
We probably need to do something if the store itself is a vXi1 type, but I'll leave that til a testcase appears.
llvm-svn: 347632
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
We have these 2 "isDesirable" promotion hooks (I'm not sure why we need both of them, but that's
independent of this patch), and we can adjust them to promote "mul i8 X, C" to i32. Then, all of
our existing LEA and other multiply expansion magic happens as it would for i32 ops.
Some of the test diffs show that we could end up with an actual 32-bit mul instruction here
because we choose not to expand to simpler ops. That instruction could be slower depending on the
subtarget. On the plus side, this means we don't need a separate instruction to load the constant
operand and possibly an extra instruction to move the result. If we need to tune mul i32 further,
we could add a later transform that tries to shrink it back to i8 based on subtarget timing.
I did not bother to duplicate all of the 32-bit test file RUNs and target settings that exist to
test whether LEA expansion is cheap or not. The diffs here assume a default target, so that means
LEA is generally cheap.
Differential Revision: https://reviews.llvm.org/D54803
llvm-svn: 347557
This should likely be adjusted to limit this transform
further, but these diffs should be clear wins.
If we have blendv/conditional move, then we should assume
those are cheap ops. The loads become independent of the
compare, so those can be speculated before we need to use
the values in the blend/mov.
llvm-svn: 347526
We can't guarantee that demanded bits passing through the vector shuffle won't cause the AND in front of this to be removed. This would prevent the PACKUS from being matched during shuffle lowering.
Unfortunately, this adds a packuswb to one of the vector-reduce-mul.ll tests since we were removing the shuffle via SimplifyDemandedVectorElts. We appear to have similar issues with vpmovwb on the same test case on other targets.
llvm-svn: 347361
Previously we emitted to separate shuffles, one for unpcklbw and one for unpcklwd. Instead emit a single shuffle equivalent to both of the original shuffles. Shuffle lowering seems able to handle it. This avoids a bitcast between the two shuffles which seems helpful to DAG combine.
Remove the custom type legalization for v8i8->v8i32. I had put that in to avoid some almost duplicate punpcklbw instructions I was seeing, but this lowering change seems to fix that. It also fixes some duplicate shuffles seen in vector-sext.ll
llvm-svn: 347348
Pull out getPackDemandedElts demanded elts remapping helper from computeKnownBitsForTargetNode and use in computeKnownBits/ComputeNumSignBits.
llvm-svn: 347303
Previously if V2 was unused we ended up using V1 for both inputs as part of the code that follows the new code. By using lowerVectorShuffleWithUNPCK we keep the undef nature of V2 in the output.
As near as I can tell this makes v16i8 behavior consistent with every other VT now.
This does mean that we give the register allocator freedom to fill in random registers now and create false dependencies. But like I said we're already doing that for other types.
llvm-svn: 347296
getZeroVector produces a specifically canonicalized zero vector, but we can just let DAG legalization take care of it.
The test changes are because MULH lowering happens later than it should and this change gave us the opportunity to constant fold away a multiply during a DAG combine before the build_vector got legalized with a bitcast.
llvm-svn: 347290
SSE PSHUFB vector ctlz lowering works at the i4 nibble level. As detailed in PR39703, we were masking the lower nibble off but we only actually use it in the case where the upper nibble is known to be zero, making it safe to remove the mask and save an instruction.
Differential Revision: https://reviews.llvm.org/D54707
llvm-svn: 347242
Previously we split the vectors in half to allow the two halves to be any extended then concatenated the results back together.
This patch instead instead extends the v16i8 sse algorithm to extend half of each 128-bit lane using punpcklbw/punpckhbw. Multiplies all the low half lanes and high half lanes together in separate operations. Then merges the half lane results back together using packuswb.
Unfortunately, some of the cases in vector-reduce-mul.ll regress because we aren't narrowing the vector width of the multiplies as we reduce. The splitting was somewhat making up for that before by causing halves to be discarded after the split.
Differential Revision: https://reviews.llvm.org/D54668
llvm-svn: 347240
The shift requires a copy to avoid clobbering a register. Comparing with 0 uses an xor to produce 0 that will be overwritten with the compare results. So still requires 2 instructions, but should be one byte shorter since it doesn't need to encode an immediate.
llvm-svn: 347185
Previously we used an arithmetic shift right by 31, but that requires a copy to preserve the input. So we might as well materialize a zero and compare to it since the comparison will overwrite the register that contains the zeros. This should be one byte shorter.
llvm-svn: 347181
Leave just the v4i8->v4i64 and v8i8->v8i64, but only enable them on pre-sse4.1 targets when 64-bit mode is enabled. In those cases we end up creating sext loads that get scalarized to code that looks better than what we get from loading into a vector register and doing a multiple step sign extend using unpacks and shifts.
llvm-svn: 347180
Pre-SSE4.1 sext_invec for v2i64 is complicated because we don't have a v2i64 sra instruction. So instead we sign extend to i32 using unpack and sra, then copy the elements and do a v4i32 sra to fill with sign bits, then interleave the i32 sign extend and the sign bits. So really we're doing to two sign extends but only using half of the v4i32 intermediate result.
When the result is more than 128 bits, default type legalization would prefer to split the destination type all the way down to v2i64 with shuffles followed by v16i8/v8i16->v2i64 sext_inreg operations. This results in more instructions than necessary because we are only utilizing the lower 2 elements of the v4i32 intermediate result. Instead we can custom split a v4i8/v4i16->v4i64 sign_extend. Then we can sign extend v4i8/v4i16->v4i32 invec producing a full v4i32 result. Create the sign bit vector as a v4i32 then split and interleave with the sign bits using an punpackldq and punpackhdq.
llvm-svn: 347176
If we widen illegal types instead of promoting, we should be able to rely on the type legalizer to create the vector_inreg operations for us with some caveats.
This patch disables combineToExtendVectorInReg when we are using widening.
I've enabled custom legalization for v8i8->v8i64 extends under avx512f since the type legalizer would want to create a vector_inreg with a v64i8 input type which isn't legal without avx512bw. So we go to v16i8 with custom code using the relaxation of rules we get from D54346.
I've also enable custom legalization of v8i64 and v16i32 operations with with AVX. When the input type is 128 bits, the default splitting legalization would extend first 128->256, then do the a split to two 128 pieces. Extend each half to 256 and then concat the result. The custom legalization I've added instead uses a 128->256 bit vector_inreg extend that only reads the lower 64-bits for the low half of the split. Then shuffles the high 64-bits to the low 64-bits and does another vector_inreg extend.
llvm-svn: 347172
Summary: This is an improvement over the two pshufbs and punpcklqdq we'd get otherwise.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54671
llvm-svn: 347171
Refactor towards making this recursive (necessary for PR38243 rotation splat detection).
IsSplatVector returns the original vector source of the splat and the splat index.
GetSplatValue returns the scalar splatted value as an extraction from IsSplatVector.
llvm-svn: 347168
We were using the 'normalized' shuffle mask from resolveTargetShuffleInputs, which replaces zero/undef inputs with sentinel values. For SimplifyDemandedVectorElts we need the raw mask so we can correctly demand those 'zero' inputs that got normalized away, this requires an extra bit of logic to locally normalize undef inputs.
llvm-svn: 347158
The zero extend will require two stages of unpacks to implement. So its better to shrink the multiply using pmullw and then extend that result back to v4i32 using a single unpack.
llvm-svn: 347149
This tries to force the result type to vXi32 followed by a truncate. This can help avoid scalarization that would otherwise occur.
There's some annoying examples of an avx512 truncate instruction followed by a packus where we should really be able to just use one truncate. But overall this is still a net improvement.
llvm-svn: 347105
By early promoting the multiply to use an i16 element type we can avoid op legalization emit a second multiply for the 8 upper elements of the v16i8 type we would otherwise get.
llvm-svn: 347032
We aren't going to use the upper bits of the multiply result that the extend would effect. So we don't need a specific type of extend.
This makes some reduction test cases shorter because we were previously trying to sign_extend a truncate which we can't eliminate.
llvm-svn: 347011
Removing this code doesn't affect any lit tests so it doesn't appear to be tested anymore. I assume it was when it was added, but I guess something else changed? Code coverage report also says its unused.
I mostly didn't like that it seemed to count the sign bits as if it was a sign_extend, but then set isPositive as if it was a zero_extend. It feels like we should have picked one interpretation?
Differential Revision: https://reviews.llvm.org/D54596
llvm-svn: 346995
Use unsigned to calculate the subvector index to avoid a cast.
Remove an unnecessary condition and replace it with a stronger assert.
Use the InVT variable we updated when we extracted instead of grabbing it from the In SDValue.
llvm-svn: 346983
In reduceVMULWidth, we no longer need to worry about extending the vector to 128 bits first. Regular widening of extends, muls and shuffles will take care of that for us.
In combineMulToPMADDWD, we can handle v2i32 multiplies and allow the VPMADDWD to be widened to v4i32 during type legalization by adding custom widening like we do have for AVG/ADDUS/SUBUS. I had to modify that code a little to allow different and output VTs.
Differential Revision: https://reviews.llvm.org/D54512
llvm-svn: 346980
This avoids some nasty shuffles when we have avx512. It will also prevent using zmm truncate instructions when a ymm instruction that zeroes part of an xmm register will do. Also avoid using avx512 truncate instructions when the input is 128 bits or less. These instructions are 2 uops on skx so we can probably find a better single uop shuffle like pshufb.
llvm-svn: 346936
The narrow types end up requesting widening, but generic legalization will end up scalaring and using a build_vector to do the widening.
llvm-svn: 346916
On 64-bit targets the type legalizer will use i64 to legalize these. But when i64 isn't legal, the type legalizer won't try an FP type. So do it manually instead.
There are a few regressions in here due to some v2i32 operations like mul and div now being reassembled into a full vector just to store instead of storing the pieces. But this was already occuring in 64-bit mode so its not a new issue.
llvm-svn: 346908
Narrower vectors will be widened to 128 bits without changing the element size. And generic type legalization can already handle widening mulhu/mulhs.
Differential Revision: https://reviews.llvm.org/D54513
llvm-svn: 346879
This patch removes the last use of the constant pool shuffle decode helper and consistently uses the 'getTargetShuffleMaskIndices' versions instead. The constant pool versions are now purely used for assembly comments.
The avx512vbmi intrinsic upgrades had to be altered as they were being decoded as broadcasts, similar to what I fixed in rL346032. I don't think the change is critical - although its annoying that we lose the {k}{z} instruction test coverage as they are tricky to generate....
Differential Revision: https://reviews.llvm.org/D54083
llvm-svn: 346850
Previously, the extend_vector_inreg opcode required their input register to be the same total width as their output. But this doesn't match up with how the X86 instructions are defined. For X86 the input just needs to be a legal type with at least enough elements to cover the output.
This patch weakens the check on these nodes and allows them to be used as long as they have more input elements than output elements. I haven't changed type legalization behavior so it will still create them with matching input and output sizes.
X86 will custom legalize these nodes by shrinking the input to be a 128 bit vector and once we've done that we treat them as legal operations. We still have one case during type legalization where we must custom handle v64i8 on avx512f targets without avx512bw where v64i8 isn't a legal type. In this case we will custom type legalize to a *extend_vector_inreg with a v16i8 input. After that the input is a legal type so type legalization should ignore the node and doesn't need to know about the relaxed restriction. We are no longer allowed to use the default expansion for these nodes during vector op legalization since the default expansion uses a shuffle which required the widths to match. Custom legalization for all types will prevent us from reaching the default expansion code.
I believe DAG combine works correctly with the released restriction because it doesn't check the number of input elements.
The rest of the patch is changing X86 to use either the vector_inreg nodes or the regular zero_extend/sign_extend nodes. I had to add additional isel patterns to handle any_extend during isel since simplifydemandedbits can create them at any time so we can't legalize to zero_extend before isel. We don't yet create any_extend_vector_inreg in simplifydemandedbits.
Differential Revision: https://reviews.llvm.org/D54346
llvm-svn: 346784
This patch adds the ability to use a PALIGNR to rotate a pair of inputs to select a range containing all the referenced elements, followed by a single input permute to put them in the right location.
Differential Revision: https://reviews.llvm.org/D54267
llvm-svn: 346706
Truncate and shuffle lowering are already capable of matching to PACKUS using known bits analysis.
This features one test change where we now prefer to extend v16i16->v16i32 then trunc v16i32->v16i8 over extract_subvector+packus when avx512f is available, but avx512bw is not.
llvm-svn: 346697
getConstant will create a BUILD_VECTOR for us and use a legal type if necessary. So just create the simple node and let BUILD_VECTOR legalization do the canonicalization.
llvm-svn: 346603
This gives shuffle lowering the freedom to use zero_extend_vector_inreg for the unpckl shuffle. Shuffle combining usually makes this swap later, but not when AVX512 is enabled it seems.
While there also use DAG.getConstant to create a 0 vector instead of using the helper the forces a specific BUILD_VECTOR. I don't think that helper is usually needed. We're basically free to create a constant build_vector anytime and it will be legalized on its own.
llvm-svn: 346574
With avx512f but not avx512bw we need to extend to v16i32 then truncate that to to v16i8. Previously we emitted both nodes during lowering, but I'm trying to switch to using target independent nodes and with that switched the extend+truncate wou
This patch changes the implementation to what will be necessary with that patch which helps minimize test diffs.
llvm-svn: 346552
This makes X86ISD::VSEXT more similar to ISD::SIGN_EXTEND and ISD::ZERO_EXTEND.
I'm hoping to replace X86ISD::VSEXT/VZEXT with target independent nodes. Making the target specific nodes similar to the target independent nodes helps minimize test diffs in that patch.
llvm-svn: 346539
I noticed that we weren't generating broadcasts as much I thought we would with
D54271, and this is part of the problem.
Widening the shuffle elements means adding bitcasts and hiding the relationship
between a splatted scalar and the vector. If we can form a broadcast, do that
before going through the rest of the shuffle lowering because broadcasts should
be cheap and can often be load-folded.
Differential Revision: https://reviews.llvm.org/D54280
llvm-svn: 346498
As discussed in D54073, we have a potential regression from more aggressive vector narrowing here, so let's try to avoid that by changing build-vector lowering slightly.
Insert-vector-element lowering always does this since there's no "pinsr" for ymm/zmm:
// If the vector is wider than 128 bits, extract the 128-bit subvector, insert
// into that, and then insert the subvector back into the result.
...but we can sometimes do better for insert-into-constant-vector by using shuffle lowering.
Differential Revision: https://reviews.llvm.org/D54271
llvm-svn: 346433
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
SimplifyDemandedBits can turn a sign_extend back into an any_extend and trigger an infinite loop. So instead legalize it the same way as a sign_extend, but preserve the opcode. Then just pattern match it the same as sign_extend during isel.
I don't have a reduced test case for such an infinite loop yet.
llvm-svn: 346170
v2i8/v2i16/v2i32 are promoted to v2i64. pmuludq takes a v2i64 input and produces a v2i64 output. Since we don't about the upper bits of the type legalized multiply we can use the pmuludq to produce the multiply result for the bits we do care about.
llvm-svn: 346115
Summary: This also enables some constant folding from KnownBits propagation. This helps on some cases vXi64 case in 32-bit mode where constant vectors appear as vXi32 and a bitcast. This can prevent getNode from constant folding sra/shl/srl.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54069
llvm-svn: 346102
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
The majority of the changes are because the rest of shuffle lowering/combining prefers to replace the undef input with the other operand. Using UNPCKL directly seemed to avoid this and just grabbed a randomish register for the undef which can create false dependencies.
llvm-svn: 346050
We already have custom lowering for the AVX case in LegalizeVectorOps. So its better to keep the regular extend op around as long as possible.
I had to qualify one place in DAG combine that created illegal vector extending load operations. This change by itself had no effect on any tests which is why its included here.
I've made a few cleanups to the custom lowering. The sign extend code no longer creates an identity shuffle with undef elements. The zero extend code now emits a zero_extend_vector_inreg instead of an unpckl with a zero vector.
For the high half of the custom lowering of zero_extend/any_extend, we're now using an unpckh with a zero vector or undef. Previously we used used a pshufd to move the upper 64-bits to the lower 64-bits and then used a zero_extend_vector_inreg. I think the zero vector should require less execution resources and be smaller code size.
Differential Revision: https://reviews.llvm.org/D54024
llvm-svn: 346043
This patch adds support for expanding vector CTPOP instructions and removes the x86 'bitmath' lowering which replicates the same expansion.
Differential Revision: https://reviews.llvm.org/D53258
llvm-svn: 345869
Reapplying an updated version of rL345395 (reverted in rL345451), now the issues noticed in PR39483 have been fixed.
This patch allows resolveTargetShuffleInputs to remove UNDEF inputs from cases where we have more than 2 inputs.
llvm-svn: 345824
The CONCAT_VECTORS case was using the original mask element count to determine how to adjust the broadcast index. But if we looked through a bitcast the original mask size doesn't tell us anything about the concat_vectors.
This patch switchs to using the concat_vectors input element count directly instead.
Differential Revision: https://reviews.llvm.org/D53823
llvm-svn: 345626
Summary: Previously if we had a bitcast vector output type that needs promotion and a vector input type that needs widening we would just do a stack store and load to handle the conversion. We can do a little better if we can widen the bitcast to a legal vector type the same size as the widened input type. Then we can do the bitcast between this widened type and the widened input type. Afterwards we can extract_subvector back to the original output and any_extend that. Type legalization will then circle back and handle promotion of the extract_subvector and the any_extend will just be removed. This will avoid going through the stack and allows us to remove a custom version of this legalization from X86.
Reviewers: efriedma, RKSimon
Reviewed By: efriedma
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53229
llvm-svn: 345567
Use SelectionDAG::EVTToAPFloatSemantics. Make the LogicVT calculation in LowerFABSorFNEG similar to LowerFCOPYSIGN. Use APInt::getSignedMaxValue instead of ~APInt::getSignMask.
llvm-svn: 345565
Add vector support to TargetLowering::expandFP_TO_UINT.
This exposes an issue in X86TargetLowering::LowerVSELECT which was assuming that the select mask was the same width as the LHS/RHS ops - as long as the result is a sign splat we can easily sext/trunk this.
llvm-svn: 345473
Makes no difference to actual shuffle decoding yet, but merges all the existing limits in one place for when proper support is fixed.
........
Its been reported that this is causing out of trunk failures.
llvm-svn: 345451
These promotions add additional bitcasts to the SelectionDAG that can pessimize computeKnownBits/computeNumSignBits. It also seems to interfere with broadcast formation.
This patch removes the promotion and adds isel patterns instead.
The increased table size is more than I would like, but hopefully we can find some canonicalizations or other tricks to start pruning out patterns going forward.
Differential Revision: https://reviews.llvm.org/D53268
llvm-svn: 345408
This is a narrow fix for 1 of the problems mentioned in PR27780:
https://bugs.llvm.org/show_bug.cgi?id=27780
I looked at more general solutions, but it's a mess. We canonicalize shuffle masks
based on the number of elements accessed from each operand, and that's not optional.
If you remove that, we'll crash because we fail to match isel patterns. So I'm
waiting until we're sure that we have blendvb with constant condition and then
commuting based on the load potential. Other cases like blend-with-immediate are
already handled elsewhere, so this is probably not a common problem anyway.
I didn't use "MayFoldLoad" because that checks for one-use and in these cases, we've
screwed that up by creating a temporary PSHUFB using these operands that we're counting
on to be killed later. Undoing that didn't look like a simple task because it's
intertwined with determining if we actually use both operands of the shuffle or not.a
Differential Revision: https://reviews.llvm.org/D53737
llvm-svn: 345390
Multiply a is complex operation so just because some bit of the output isn't used doesn't mean that bit of the input isn't used.
We might able to bound it, but it will require some more thought.
llvm-svn: 345241
Add X86 SimplifyDemandedBitsForTargetNode and use it to simplify PMULDQ/PMULUDQ target nodes.
This enables us to repeatedly simplify the node's arguments after the previous approach had to be reverted due to PR39398.
Differential Revision: https://reviews.llvm.org/D53643
llvm-svn: 345182
When implementing memset's today we often see this pattern:
$x0 = MOV 0xXYXYXYXYXYXYXYXY
store $x0, ...
$w1 = MOV 0xXYXYXYXY
store $w1, ...
We first create a 64bit constant in a 64bit register with all bytes the
same and then create a 32bit constant with all bytes the same in a 32bit
register. In many targets we could just access the lower byte of the
64bit register instead.
- Ideally this would be handled by the ConstantHoist pass but it runs
too early when memset isn't expanded yet.
- The memset expansion code already had this optimization implemented,
however SelectionDAG constantfolding would constantfold the
"trunc(bigconstnat)" pattern to "smallconstant".
- This patch makes the memset expansion mark the constant as Opaque and
stop DAGCombiner from constant folding in this situation. (Similar to
how ConstantHoisting marks things as Opaque to avoid folding
ADD/SUB/etc.)
Differential Revision: https://reviews.llvm.org/D53181
llvm-svn: 345102
We can't add the MULDQ node back to the worklist after the demanded bits change has been committed in case the node has been removed entirely. This will have to wait until we have SimplifyDemandedBitsForTargetNode.
llvm-svn: 345070
Matches the approach taken in the constant pool shuffle decoders, and uses an UndefElts mask instead of uint64_t(-1) raw mask values, which doesn't work safely for i32/i64 shuffle mask sizes (as the -1 value is legal).
This allows us to remove the constant pool shuffle decoders from most of the getTargetShuffleMask variable shuffle cases (X86ISD::VPERMV3 will be handled in a future commit).
llvm-svn: 345018
I've included a fix to DAGCombiner::ForwardStoreValueToDirectLoad that I believe will prevent the previous miscompile.
Original commit message:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to rem
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the lo
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344965
We can't safely assume that certain RawMask entries are UNDEF as most variable shuffles ignore non-index bits - PSHUFB only works on i8 elts so it'd be safe to use but I'm intending to come up with an alternative approach that works for all.
........
Enable this for PSHUFB constant mask decoding and remove the ConstantPool DecodePSHUFBMask
llvm-svn: 344937
We can't safely assume that certain RawMask entries are UNDEF as most variable shuffles ignore non-index bits.
........
Add support for UNDEF raw mask elements and remove the ConstantPool DecodeVPERMILPMask usage in X86ISelLowering.cpp
llvm-svn: 344936
Simon Pilgrim