Scavenging slots were only reserved when pseudo-instruction expansion in
frame lowering created new virtual registers. It is possible to still
need a scavenging slot even if no virtual registers were created, in cases
where the stack is large enough to overflow instruction offsets.
llvm-svn: 277355
The DAG combiner tries to merge stores to adjacent vector wide memory
locations by creating stores which are integral multiples of the vector
width. Discourage this by informing it that this is slow. This should
not affect legalization passes, because all of them ignore the "Fast"
argument.
Patch by Pranav Bhandarkar.
llvm-svn: 277178
Software pipelining is an optimization for improving ILP by
overlapping loop iterations. Swing Modulo Scheduling (SMS) is
an implementation of software pipelining that attempts to
reduce register pressure and generate efficient pipelines with
a low compile-time cost.
This implementaion of SMS is a target-independent back-end pass.
When enabled, the pass should run just prior to the register
allocation pass, while the machine IR is in SSA form. If the pass
is successful, then the original loop is replaced by the optimized
loop. The optimized loop contains one or more prolog blocks, the
pipelined kernel, and one or more epilog blocks.
This pass is enabled for Hexagon only. To enable for other targets,
a couple of target specific hooks must be implemented, and the
pass needs to be called from the target's TargetMachine
implementation.
Differential Review: http://reviews.llvm.org/D16829
llvm-svn: 277169
If the mask of a vector shuffle has alternating odd or even numbers
starting with 1 or 0 respectively up to the largest possible index
for the given type in the given HVX mode (single of double) we can
generate vpacko or vpacke instruction respectively.
E.g.
%42 = shufflevector <32 x i16> %37, <32 x i16> %41,
<32 x i32> <i32 1, i32 3, ..., i32 63>
is %42.h = vpacko(%41.w, %37.w)
Patch by Pranav Bhandarkar.
llvm-svn: 277168
Rebalances address calculation trees and applies Hexagon-specific
optimizations to the trees to improve instruction selection.
Patch by Tobias Edler von Koch.
llvm-svn: 277151
The post register allocator scheduler can generate poor schedules
because the scoreboard hazard recognizer is unable to identify
hazards for Hexagon precisely. Instead, Hexagon should use a DFA
based hazard recognizer.
Patch by Brendon Cahoon.
llvm-svn: 277143
Normally, CFI instructions should be inserted after allocframe, but
if allocframe is in the same packet with a call, the CFI instructions
should be inserted before that packet.
llvm-svn: 277020
Before adding a new preheader block, check if there is a candidate block
where the loop setup could be placed speculatively. This will be off by
default.
llvm-svn: 276919
The callee-saved registers that are saved in a function are not pristine,
and so they can be defined and used. In case of shrink-wrapping though,
there are blocks that are outside of the save/restore range, and in those
blocks the saved registers must be treated as pristine. To avoid any uses
of these registers, add them as live-in in all those blocks.
This was already done for blocks reaching function exits after restore,
add code that does the same for blocks reached from the function entry
before save.
llvm-svn: 276886
Consider this case:
vreg1 = A2_zxth vreg0 (1)
...
vreg2 = A2_zxth vreg1 (2)
Redundant instruction elimination could delete the instruction (1)
because the user (2) only cares about the low 16 bits. Then it could
delete (2) because the input is already zero-extended. The problem
is that the properties allowing each individual instruction to be
deleted depend on the existence of the other instruction, so either
one can be deleted, but not both.
The existing check for this situation in RIE was insufficient. The
fix is to update all dependent cells when an instruction is removed
(replaced via COPY) in RIE.
llvm-svn: 276792
When the packetizer wants to put a store to a stack slot in the same
packet with an allocframe, it updates the store offset to reflect the
value of SP before it is updated by allocframe. If the store cannot
be packetized with the allocframe after all, the offset needs to be
updated back to the previous value.
llvm-svn: 276749
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
- FuncNode::findBlock traverses the function every time. Avoid using it,
and keep a cache of block addresses in DataFlowGraph instead.
- The operator[] in the map of definition stacks was very slow. Replace
the map with unordered_map.
llvm-svn: 276429
Schedule a load and its use in the same packet in MISched. Previously,
isResourceAvailable was returning false for dependences in the same
packet, which prevented MISched from packetizing a load and its use in
the same packet for v60.
Patch by Ikhlas Ajbar.
llvm-svn: 275804
The machine scheduler needs to account for available resources
more accurately in order to avoid scheduling an instruction that
forces a new packet to be created.
This occurs in two ways: First, an instruction without an available
resource may have a large priority due to other metrics and be
scheduled when there are other instructions with available resources.
Second, an instruction with a non-zero latency may become available
prematurely. In both these cases, we attempt change the priority
in order to allow a better instruction to be scheduled.
Patch by Brendon Cahoon.
llvm-svn: 275793
An instruction may have multiple predecessors that are candidates
for using .cur. However, only one of them can use .cur in the
packet. When this case occurs, we need to make sure that only
one of the dependences gets a 0 latency value.
Patch by Brendon Cahoon.
llvm-svn: 275790
The Hexagon schedulers need to handle instructions with a latency
of 0 or 2 more accurately. The problem, in v60, is that a dependence
between two instructions with a 2 cycle latency can use a .cur version
of the source to achieve a 0 cycle latency when the use is in the
same packet. Any othe use, must be at least 2 packets later, or a
stall occurs. In other words, the compiler does not want to schedule
the dependent instructions 1 cycle later.
To achieve this, the latency adjustment code allows only a single
dependence to have a zero latency. All other instructions have the
other value, which is typically 2 cycles. We use a heuristic to
determine which instruction gets the 0 latency.
The Hexagon machine scheduler was also changed to increase the cost
associated with 0 latency dependences than can be scheduled in the
same packet.
Patch by Brendon Cahoon.
llvm-svn: 275625
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Summary:
Previously we took an unsigned.
Hooray for type-safety.
Reviewers: chandlerc
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D22282
llvm-svn: 275591
- Treat bitwise OR with a frame index as an ADD wherever possible, fold it
into addressing mode.
- Extend patterns for memops to allow memops with frame indexes as address
operands.
llvm-svn: 275569
On Hexagon is it legal to packetize the instructions setting up call
arguments with the call instruction itself. This was already done,
except for tail calls. Make sure tail calls are handled as well.
llvm-svn: 275458
Avoid implicit iterator conversions from MachineInstrBundleIterator to
MachineInstr* in the Hexagon backend, mostly by preferring MachineInstr&
over MachineInstr* and switching to range-based for loops.
There's a long tail of API cleanup here, but I'm planning to leave the
rest to the Hexagon maintainers. HexagonInstrInfo defines many of its
own predicates, and most of them still take MachineInstr*. Some of
those actually check for nullptr, so I didn't feel comfortable changing
them to MachineInstr& en masse.
llvm-svn: 275142
Stop using an implicit conversion from the return of
MachineBasicBlock::getFirstTerminator to MachineInstr*. In two cases,
directly dereference to a MachineInstr& since later code assumes it's
valid. In a third case, change to an iterator since later code checks
against MachineBasicBlock::end.
Although the fix for the third case avoids undefined behaviour, I expect
this doesn't cause a functionality change in practice (since the basic
block already has a terminator).
llvm-svn: 274898
This could of course be a simple binary search with no global state
involved at all if someone cares enough. Just don't make everyone
linking the hexagon backend pay for it on process startup and shutdown.
llvm-svn: 274437
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
I think this converts all the simple cases that really just care about
the generated code being position independent or not. The remaining
uses are a bit more complicated and are checking things like "is this
a library or executable" or "can this symbol be preempted".
llvm-svn: 274055
Recommiting after correcting over-eager Debug Value transfer fixing PR28270.
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 273585
MCSymbol.h shouldn't pull in MCAssembler.h, just MCFragment.h.
MCLinkerOptimizationHint.h shouldn't need MCMachObjectWriter.h. The
rest is fixing the fallout.
llvm-svn: 273507
Transform: (store ch addr (add x (add (shl y c) e)))
to: (store ch addr (add x (shl (add y d) c))),
where e = (shl d c) for some integer d.
The purpose of this is to enable generation of loads/stores with
shifted addressing mode, i.e. mem(x+y<<#c). For that, the shift
value c must be 0, 1 or 2.
llvm-svn: 273466
Recommiting after fixing over-aggressive assertion
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 273456
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
Recommiting after fixing non-atomic insert to front of SmallVector in
MCAsmLexer.h
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 273007
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 272953
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 272792
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Also, switch to using functions from LiveIntervalAnalysis to update
live intervals, instead of performing the updates manually.
Re-committing r272045.
llvm-svn: 272135
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
subclasses. These are not passes proper. We don't support registering
them, they can't be constructed with default arguments, and the ID is
actually in a base class.
Only these two targets even had any boiler plate to try to do this, and
it had to be munged out of the INITIALIZE_PASS macros to work. What's
worse, the boiler plate has rotted and the "name" of the pass is
actually the description string now!!! =/ All of this is completely
unnecessary. No other target bothers, and nothing breaks if you don't
initialize them because CodeGen has an entirely separate initialization
path that is somewhat more durable than relying on the implicit
initialization the way the 'opt' tool does for registered passes.
llvm-svn: 271650
Handle it locally instead of having the target-independent pass deal
with it. The generic pass does not preserve implicit uses, which may
be necessary.
llvm-svn: 271520
Composing subreg_loreg with subreg_oveflow leads to strange results with
lane masks for register classes with subreg_loreg. In particular, dead
lane detection generates incorrect code.
llvm-svn: 271087
The aggressive anti-dependency breaker can rename the restored callee-
saved registers. To prevent this, mark these registers are live on all
paths to the return/tail-call instructions, and add implicit use operands
for them to these instructions.
llvm-svn: 270898
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
Recent changes to the instruction selection code exposed a problem where
a dead node was not removed on time. This node had both input and output
chains, which lead to an apparent cycle.
llvm-svn: 269458
- Where we were returning a node before, call ReplaceNode instead.
- Where we had already replaced all uses and we returned a node, just
remove the dead node instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
Part of llvm.org/pr26808.
llvm-svn: 269358
When generating .cfi_offset instructions, make sure that the offset is
calculated with respect to the register used to define the CFA (which is
currently always FP+8).
llvm-svn: 269191
This is a bit of a spot fix for now. I'll try to fix this up more
comprehensively soon.
This is part of the work to have Select return void instead of an
SDNode *, which is in turn part of llvm.org/pr26808.
llvm-svn: 269112
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
In a case like
J2_callr <ga:@foo>, %R0<imp-use>, ...
R0<def> = ...
the anti-dependency on R0 cannot be ignored and the two instructions
cannot be packetized together, since if they were, the assignment to
R0 would take place before the call.
llvm-svn: 268776
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
The instruction A2_tfrpi has a 64-bit operand, while the corresponding
intrinsic takes a 32-bit value. The actual value has only 8 significant
bits, so the difference is only in the type used to represent it.
In order to map the intrinsic to the instruction, the operand needs to
be extended to the correct type.
llvm-svn: 268635
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
Dead phi nodes are needed for code motion (such as copy propagation),
where a new use would be placed in a location that would be dominated
by a dead phi. Such a transformation is not legal for copy propagation,
and the existence of the phi would prevent it, but if the phi is not
there, it may appear to be valid.
llvm-svn: 267932
Krzysztof Parzyszek