Commit rL347861 introduced an unintentional change in the behaviour when
compiling for AArch64 at -O0 with -global-isel=0. Previously, explicitly
disabling GlobalISel resulted in using FastISel but an updated condition
in the commit changed it to using SelectionDAG. The patch fixes this
condition and slightly better organizes the code that chooses the
instruction selector.
Fixes PR40131.
Differential Revision: https://reviews.llvm.org/D56266
llvm-svn: 350626
We have code to split vector splats (of zero and non-zero) for performance
reasons, but it ignores the fact that a store might be truncating.
Actually, truncating stores are formed for vNi8 and vNi16 types. Since the
truncation is from a legal type, the size of the store is always <= 64-bits and
so they don't actually benefit from being split up anyway, so this patch just
disables that transformation.
llvm-svn: 350620
default
During the lowering of a switch that would result in the generation of a jump
table, a range check is performed before indexing into the jump table, for the
switch value being outside the jump table range and a conditional branch is
inserted to jump to the default block. In case the default block is
unreachable, this conditional jump can be omitted. This patch implements
omitting this conditional branch for unreachable defaults.
Review Reference: D52002
llvm-svn: 350186
@bextr64_32_b1 is extracted from hotpath of real-world code
(RawSpeed BitStream<>::peekBitsNoFill()) after `clang -O3`.
@bextr64_32_b2/@bextr64_32_b0 is the same pattern,
but with trunc done last, showing how i think it can be handled:
https://rise4fun.com/Alive/K4Bhttps://rise4fun.com/Alive/qC9
It is possible that middle-end should do some of this, too.
https://bugs.llvm.org/show_bug.cgi?id=36419
llvm-svn: 349998
This adds support for widening G_FCEIL in LegalizerHelper and
AArch64LegalizerInfo. More specifically, it teaches the AArch64 legalizer to
widen G_FCEIL from a 16-bit float to a 32-bit float when the subtarget doesn't
support full FP 16.
This also updates AArch64/f16-instructions.ll to show that we perform the
correct transformation.
llvm-svn: 349927
If you don't do this, then if you hit a G_LOAD in getInstrMapping, you'll end
up with GPRs on the G_FCEIL instead of FPRs. This causes a fallback.
Add it to the switch, and add a test verifying that this happens.
llvm-svn: 349822
This code pattern is an unfortunate side effect of the way some types get split
at call lowering. Ideally we'd either not generate it at all or combine it away
in the legalizer artifact combiner.
Until then, add selection support anyway which is a significant proportion of
our current fallbacks on CTMark.
rdar://46491420
llvm-svn: 349712
This adds a G_FCEIL generic instruction and uses it in AArch64. This adds
selection for floating point ceil where it has a supported, dedicated
instruction. Other cases aren't handled here.
It updates the relevant gisel tests and adds a select-ceil test. It also adds a
check to arm64-vcvt.ll which ensures that we don't fall back when we run into
one of the relevant cases.
llvm-svn: 349664
As described on PR40091, we have several places where zext (and zext_vector_inreg) fold an undef input into an undef output. For zero extensions this is incorrect as the output should guarantee to least have the new upper bits set to zero.
SimplifyDemandedVectorElts is the worst offender (and its the most likely to cause new undefs to appear) but DAGCombiner's tryToFoldExtendOfConstant has a similar issue.
Thanks to @dmgreen for catching this.
Differential Revision: https://reviews.llvm.org/D55883
llvm-svn: 349625
Summary: This the initial code change to facilitate managing FMF flags from Instructions to MI wrt Intrinsics in Global Isel. Eventually the GlobalObserver interface will be added as well, where FMF additions can be tracked for the builder and CSE.
Reviewers: aditya_nandakumar, bogner
Reviewed By: bogner
Subscribers: rovka, kristof.beyls, javed.absar
Differential Revision: https://reviews.llvm.org/D55668
llvm-svn: 349514
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
The pass implements tracking of control flow miss-speculation into a "taint"
register. That taint register can then be used to mask off registers with
sensitive data when executing under miss-speculation, a.k.a. "transient
execution".
This pass is aimed at mitigating against SpectreV1-style vulnarabilities.
At the moment, it implements the tracking of miss-speculation of control
flow into a taint register, but doesn't implement a mechanism yet to then
use that taint register to mask off vulnerable data in registers (something
for a follow-on improvement). Possible strategies to mask out vulnerable
data that can be implemented on top of this are:
- speculative load hardening to automatically mask of data loaded
in registers.
- using intrinsics to mask of data in registers as indicated by the
programmer (see https://lwn.net/Articles/759423/).
For AArch64, the following implementation choices are made.
Some of these are different than the implementation choices made in
the similar pass implemented in X86SpeculativeLoadHardening.cpp, as
the instruction set characteristics result in different trade-offs.
- The speculation hardening is done after register allocation. With a
relative abundance of registers, one register is reserved (X16) to be
the taint register. X16 is expected to not clash with other register
reservation mechanisms with very high probability because:
. The AArch64 ABI doesn't guarantee X16 to be retained across any call.
. The only way to request X16 to be used as a programmer is through
inline assembly. In the rare case a function explicitly demands to
use X16/W16, this pass falls back to hardening against speculation
by inserting a DSB SYS/ISB barrier pair which will prevent control
flow speculation.
- It is easy to insert mask operations at this late stage as we have
mask operations available that don't set flags.
- The taint variable contains all-ones when no miss-speculation is detected,
and contains all-zeros when miss-speculation is detected. Therefore, when
masking, an AND instruction (which only changes the register to be masked,
no other side effects) can easily be inserted anywhere that's needed.
- The tracking of miss-speculation is done by using a data-flow conditional
select instruction (CSEL) to evaluate the flags that were also used to
make conditional branch direction decisions. Speculation of the CSEL
instruction can be limited with a CSDB instruction - so the combination of
CSEL + a later CSDB gives the guarantee that the flags as used in the CSEL
aren't speculated. When conditional branch direction gets miss-speculated,
the semantics of the inserted CSEL instruction is such that the taint
register will contain all zero bits.
One key requirement for this to work is that the conditional branch is
followed by an execution of the CSEL instruction, where the CSEL
instruction needs to use the same flags status as the conditional branch.
This means that the conditional branches must not be implemented as one
of the AArch64 conditional branches that do not use the flags as input
(CB(N)Z and TB(N)Z). This is implemented by ensuring in the instruction
selectors to not produce these instructions when speculation hardening
is enabled. This pass will assert if it does encounter such an instruction.
- On function call boundaries, the miss-speculation state is transferred from
the taint register X16 to be encoded in the SP register as value 0.
Future extensions/improvements could be:
- Implement this functionality using full speculation barriers, akin to the
x86-slh-lfence option. This may be more useful for the intrinsics-based
approach than for the SLH approach to masking.
Note that this pass already inserts the full speculation barriers if the
function for some niche reason makes use of X16/W16.
- no indirect branch misprediction gets protected/instrumented; but this
could be done for some indirect branches, such as switch jump tables.
Differential Revision: https://reviews.llvm.org/D54896
llvm-svn: 349456
The default still is dwarf, but SEH exceptions can now be enabled
optionally for the MinGW target.
Differential Revision: https://reviews.llvm.org/D55748
llvm-svn: 349451
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
The Load/Store Optimizer runs before Machine Block Placement. At O3 the
Tail Duplication Threshold is set to 4 instructions and this can create
new opportunities for the Load/Store Optimizer. It seems worthwhile to
run it once again.
llvm-svn: 349338
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 349016
Summary:
All targets either just return false here or properly model `Fast`, so I
don't think there is any reason to prevent CodeGen from doing the right
thing here.
Subscribers: nemanjai, javed.absar, eraman, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D55365
llvm-svn: 348843
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
Record the stack protector index in MachineFrameInfo when translating
Intrinsic::stackprotector similarly as is done by SelectionDAG when
processing the same intrinsic.
Setting this index allows the Prologue/Epilogue Insertion to recognize
that the stack protection is enabled. The pass can then make sure that
the stack protector comes before local variables on the stack and
assigns potentially vulnerable objects first so they are close to the
stack protector slot.
Differential Revision: https://reviews.llvm.org/D55418
llvm-svn: 348761
If this is not a valid way to assign an SDLoc, then we get this
wrong all over SDAG.
I don't know enough about the SDAG to explain this. IIUC, theoretically,
debug info is not supposed to affect codegen. But here it has clearly
affected 3 different targets, and the x86 change is an actual improvement.
llvm-svn: 348552
The code emitting AND-subtrees used to check whether any of the operands
was an OR in order to figure out if the result needs to be negated.
However the OR could be hidden in further subtrees and not immediately
visible.
Change the code so that canEmitConjunction() determines whether the
result of the generated subtree needs to be negated. Cleanup emission
logic to use this. I also changed the code a bit to make all negation
decisions early before we actually emit the subtrees.
This fixes http://llvm.org/PR39550
Differential Revision: https://reviews.llvm.org/D54137
llvm-svn: 348444
These opcodes are intended to subsume some of the capability of G_MERGE_VALUES,
as it was too powerful and thus complex to add deal with throughout the GISel
pipeline.
G_BUILD_VECTOR creates a vector value from a sequence of uniformly typed
scalar values. G_BUILD_VECTOR_TRUNC is a special opcode for handling scalar
operands which are larger than the destination vector element type, and
therefore does an implicit truncate.
G_CONCAT_VECTOR creates a vector by concatenating smaller, uniformly typed,
vectors together.
These will be used in a subsequent commit. This commit just adds the initial
infrastructure.
Differential Revision: https://reviews.llvm.org/D53594
llvm-svn: 348430
Mostly NFC, only change is the order of outlined function names.
Loop over the outlined functions instead of walking the candidate list.
This is a bit easier to understand. It's far more natural to create a function,
then replace all of its occurrences with calls than the other way around.
The functions outlined after this do not change, but their names will be
decided by their benefit. E.g, OUTLINED_FUNCTION_0 will now always be the
most beneficial function, rather than the first one seen.
This makes it easier to enforce an ordering on the outlined functions. So,
this also adds a test to make sure that the ordering works as expected.
llvm-svn: 348414
Functions annotated with `__fastcall` or `__attribute__((__fastcall__))`
or `__attribute__((__swiftcall__))` may contain SEH handlers even on
Win64. This matches the behaviour of cl which allows for
`__try`/`__except` inside a `__fastcall` function. This was detected
while trying to self-host clang on Windows ARM64.
llvm-svn: 348337
We previously disabled this in r323371 because of a bug where we selected an
extending load, but didn't delete the old G_LOAD, resulting in two loads being
generated for volatile loads.
Since we now have dedicated G_SEXTLOAD/G_ZEXTLOAD operations, and that the
tablegen patterns should no longer be able to select (ext(load x)) patterns, it
should be safe to re-enable it.
The old test case should still work as expected.
llvm-svn: 348320
The comment was misplaced, and the code didn't do what the comment indicated,
namely ignoring the varargs portion when computing the local stack size of a
funclet in emitEpilogue. This results in incorrect offset computations within
funclets that are contained in vararg functions.
Differential Revision: https://reviews.llvm.org/D55096
llvm-svn: 348222
This moves the stack check logic into a lambda within getOutliningCandidateInfo.
This allows us to be less conservative with stack checks. Whether or not a
stack instruction is safe to outline is dependent on the frame variant and call
variant of the outlined function; only in cases where we modify the stack can
these be unsafe.
So, if we move that logic later, when we're looking at an individual candidate,
we can make better decisions here.
This gives some code size savings as a result.
llvm-svn: 348220
If it's a bigger code size win to drop candidates that require stack fixups
than to demote every candidate to that variant, the outliner should do that.
This happens if the number of bytes taken by calls to functions that don't
require fixups, plus the number of bytes that'd be left is less than the
number of bytes that it'd take to emit a save + restore for all candidates.
Also add tests for each possible new behaviour.
- machine-outliner-compatible-candidates shows that when we have candidates
that don't use the stack, we can use the default call variant along with the
no save/regsave variant.
- machine-outliner-all-stack shows that when it's better to fix up the stack,
we still will demote all candidates to that case
- machine-outliner-drop-stack shows that we can discard candidates that
require stack fixups when it would be beneficial to do so.
llvm-svn: 348168
If we know that we'll definitely save LR to a register, there's no reason to
pre-check whether or not a stack instruction is unsafe to fix up.
This makes it so that we check for that condition before mapping instructions.
This allows us to outline more, since we don't pessimise as many instructions.
Also update some tests, since we outline more.
llvm-svn: 348081
Instead of treating the outlined functions for these as distinct frames, they
should be combined into one case. Neither allows for stack fixups, and both
generate the same frame. Thus, they ought to be considered one case.
This makes the code far easier to understand, for one thing. It also offers
some small code size improvements. It's fairly rare to see a class of outlined
functions that doesn't fall entirely into one variant (on CTMark anyway). It
does happen from time to time though.
This mostly offers some serious simplification.
Also update the test to show the added functionality.
llvm-svn: 348036
All that you can legitimately do with the CFI for a nounwind function
is get a backtrace, and adjusting the SCS register is not (currently)
required for this purpose.
Differential Revision: https://reviews.llvm.org/D54988
llvm-svn: 348035
It makes more sense to order FI-based memops in descending order when
the stack goes down. This allows offsets to stay "consecutive" and allow
easier pattern matching.
llvm-svn: 347906
Summary:
Replace `aext([asz]ext x)` with `aext/sext/zext x` in order to
reduce the number of instructions generated to clean up some
legalization artifacts.
Reviewers: aditya_nandakumar, dsanders, aemerson, bogner
Reviewed By: aemerson
Subscribers: rovka, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D54174
llvm-svn: 347893
* Tell the StackProtector pass to generate the epilogue instrumentation
when GlobalISel is enabled because GISel currently does not implement
the same deferred epilogue insertion as SelectionDAG.
* Update StackProtector::InsertStackProtectors() to find a stack guard
slot by searching for the llvm.stackprotector intrinsic when the
prologue was not created by StackProtector itself but the pass still
needs to generate the epilogue instrumentation. This fixes a problem
when the pass would abort because the stack guard AllocInst pointer
was null when generating the epilogue -- test
CodeGen/AArch64/GlobalISel/arm64-irtranslator-stackprotect.ll.
Differential Revision: https://reviews.llvm.org/D54518
llvm-svn: 347862
Before this patch, the following stores in `merge_fail` would fail to be
merged, while they would get merged in `merge_ok`:
```
void use(unsigned long long *);
void merge_fail(unsigned key, unsigned index)
{
unsigned long long args[8];
args[0] = key;
args[1] = index;
use(args);
}
void merge_ok(unsigned long long *dst, unsigned a, unsigned b)
{
dst[0] = a;
dst[1] = b;
}
```
The reason is that `getMemOpBaseImmOfs` would return false for FI base
operands.
This adds support for this.
Differential Revision: https://reviews.llvm.org/D54847
llvm-svn: 347747
SplitVecOp_TruncateHelper tries to promote the result type while splitting FP_TO_SINT/UINT. It then concatenates the result and introduces a truncate to the original result type. But it does this without inserting the AssertZExt/AssertSExt that the regular result type promotion would insert. Nor does it turn FP_TO_UINT into FP_TO_SINT the way normal result type promotion for these operations does. This is bad on X86 which doesn't support FP_TO_SINT until AVX512.
This patch disables the use of SplitVecOp_TruncateHelper for these operations and just lets normal promotion handle it. I've tweaked a couple things in X86ISelLowering to avoid a few obvious regressions there. I believe all the changes on X86 are improvements. The other targets look neutral.
Differential Revision: https://reviews.llvm.org/D54906
llvm-svn: 347593
We fail to canonicalize IR this way (prefer 'not' ops to arbitrary 'xor'),
but that would not matter without this patch because DAGCombiner was
reversing that transform. I think we need this transform in the backend
regardless of what happens in IR to catch cases where the shift-xor
is formed late from GEP or other ops.
https://rise4fun.com/Alive/NC1
Name: shl
Pre: (-1 << C2) == C1
%shl = shl i8 %x, C2
%r = xor i8 %shl, C1
=>
%not = xor i8 %x, -1
%r = shl i8 %not, C2
Name: shr
Pre: (-1 u>> C2) == C1
%sh = lshr i8 %x, C2
%r = xor i8 %sh, C1
=>
%not = xor i8 %x, -1
%r = lshr i8 %not, C2
https://bugs.llvm.org/show_bug.cgi?id=39657
llvm-svn: 347478
A consequence of r347274 is that SCALAR_TO_VECTOR can be converted into
BUILD_VECTOR by SimplifyDemandedBits, but LowerBUILD_VECTOR can turn
BUILD_VECTOR into SCALAR_TO_VECTOR so we get an infinite loop.
Fix this by making LowerBUILD_VECTOR not do this transformation for those
vectors that would get transformed back, i.e. BUILD_VECTOR of a single-element
constant vector. Doing that means we get a DUP, which we then need to recognise
in ISel as a copy.
llvm-svn: 347456
This is another step in vector narrowing - a follow-up to D53784
(and hoping to eventually squash potential regressions seen in
D51553).
The x86 test diffs are wins, but the AArch64 diff is probably not.
That problem already exists independent of this patch (see PR39722), but it
went unnoticed in the previous patch because there were no regression tests
that showed the possibility.
The x86 diff in i64-mem-copy.ll is close. Given the frequency throttling
concerns with using wider vector ops, an extra extract to reduce vector
width is the right trade-off at this level of codegen.
Differential Revision: https://reviews.llvm.org/D54392
llvm-svn: 347356
This patch defines an interleaved-load-combine pass. The pass searches
for ShuffleVector instructions that represent interleaved loads. Matches are
converted such that they will be captured by the InterleavedAccessPass.
The pass extends LLVMs capabilities to use target specific instruction
selection of interleaved load patterns (e.g.: ld4 on Aarch64
architectures).
Differential Revision: https://reviews.llvm.org/D52653
llvm-svn: 347208
When unwinding past a function that uses shadow call stack, we must
subtract 8 from the value of the x18 register. This patch causes us
to emit a call frame instruction that causes that to happen.
Differential Revision: https://reviews.llvm.org/D54609
llvm-svn: 347089
This patch adds support for funclets in frame lowering and ISel
lowering. Together with D50288 and D50166, it enables C++ exception
handling.
Patch by Sanjin Sijaric, with some fixes by me.
Differential Revision: https://reviews.llvm.org/D51524
llvm-svn: 346568
The DAGCombiner tries to SimplifySelectCC as follows:
select_cc(x, y, 16, 0, cc) -> shl(zext(set_cc(x, y, cc)), 4)
It can't cope with the situation of reordered operands:
select_cc(x, y, 0, 16, cc)
In that case we just need to swap the operands and invert the Condition Code:
select_cc(x, y, 16, 0, ~cc)
Differential Revision: https://reviews.llvm.org/D53236
llvm-svn: 346484
FindBetterNeighborChains simulateanously improves the chain
dependencies of a chain of related stores avoiding the generation of
extra token factors. For chains longer than the GatherAllAliasDepths,
stores further down in the chain will necessarily fail, a potentially
significant waste and preventing otherwise trivial parallelization.
This patch directly parallelize the chains of stores before improving
each store. This generally improves DAG-level parallelism.
Reviewers: courbet, spatel, RKSimon, bogner, efriedma, craig.topper, rnk
Subscribers: sdardis, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53552
llvm-svn: 346432
Like the comment says, this isn't the most efficient fix in terms of
codesize, but it works.
Differential Revision: https://reviews.llvm.org/D54129
llvm-svn: 346358
It was causing a crash because we were trying to get the definition
of a target register. Fixed the issue by adding a check and added
a test case for that.
llvm-svn: 346251
Instruction mapping in the outliner uses "illegal numbers" to signify that
something can't ever be part of an outlining candidate. This means that the
number is unique and can't be part of any repeated substring.
Because each of these is unique, we can use a single unique number to represent
a range of things we can't outline.
The outliner tries to leverage this using a flag which is set in an MBB when
the previous instruction we tried to map was "illegal". This patch improves
that logic to work across MBBs. As a bonus, this also simplifies the mapping
logic somewhat.
This also updates the machine-outliner-remarks test, which was impacted by the
order of Candidates on an OutlinedFunction changing. This order isn't
guaranteed, so I added a FIXME to fix that in a follow-up. The order of
Candidates on an OutlinedFunction isn't important, so this still is NFC.
llvm-svn: 345906
Summary:
This function was causing a crash when `MaxElements == 1` because
it was trying to create a single element vector type.
Reviewers: dsanders, aemerson, aditya_nandakumar
Reviewed By: dsanders
Subscribers: rovka, kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53734
llvm-svn: 345875
Before this patch DbgInfoAvailable was set to true in
DwarfDebug::beginModule() or CodeViewDebug::CodeViewDebug(). This made
MIR testing weird since passes would suddenly stop dealing with debug
info just because we stopped the pipeline before the debug printers.
This patch changes the logic to initialize DbgInfoAvailable based on the
fact that debug_compile_units exist in the llvm Module. The debug
printers may then override it with false in case of debug printing being
disabled.
Differential Revision: https://reviews.llvm.org/D53885
llvm-svn: 345740
Emit pseudo instructions indicating unwind codes corresponding to each
instruction inside the prologue/epilogue. These are used by the MCLayer to
populate the .xdata section.
Differential Revision: https://reviews.llvm.org/D50288
llvm-svn: 345701
The debug-use flag must be set exactly for uses on DBG_VALUEs. This is
so obvious that it can be trivially inferred while parsing. This will
reduce noise when printing while omitting an information that has little
value to the user.
The parser will keep recognizing the flag for compatibility with old
`.mir` files.
Differential Revision: https://reviews.llvm.org/D53903
llvm-svn: 345671
Summary:
Thunk functions in Windows are varag functions that call a musttail function
to pass the arguments after the fixup is done. We need to make sure that we
forward the arguments from the caller vararg to the callee vararg function.
This is the same mechanism that is used for Windows on X86.
Reviewers: ssijaric, eli.friedman, TomTan, mgrang, mstorsjo, rnk, compnerd, efriedma
Reviewed By: efriedma
Subscribers: efriedma, kristof.beyls, chrib, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53843
llvm-svn: 345641
Summary:
Normalize the offset for endianess before checking
if the store cover the load in ForwardStoreValueToDirectLoad.
Without this we missed out on some optimizations for big
endian targets. If for example having a 4 bytes store followed
by a 1 byte load, loading the least significant byte from the
store, the STCoversLD check would fail (see @test4 in
test/CodeGen/AArch64/load-store-forwarding.ll).
This patch also fixes a problem seen in an out-of-tree target.
The target has i40 as a legal type, it is big endian,
and the StoreSize for i40 is 48 bits. So when normalizing
the offset for endianess we need to take the StoreSize into
account (assuming that padding added when storing into
a larger StoreSize always is added at the most significant
end).
Reviewers: niravd
Reviewed By: niravd
Subscribers: javed.absar, kristof.beyls, llvm-commits, uabelho
Differential Revision: https://reviews.llvm.org/D53776
llvm-svn: 345636
Prevents the post-RA scheduler from modifying the prologue sequences
emitting by frame lowering. This is roughly similar to what we do for
other targets: TargetInstrInfo::isSchedulingBoundary checks
isPosition(), which checks for CFI_INSTRUCTION.
isSEHInstruction is taken from D50288; it'll land with whatever patch
lands first.
Differential Revision: https://reviews.llvm.org/D53851
llvm-svn: 345634
Re-apply r345315 with testcase fixes.
Include all of the store's source vector operands when creating the
MachineMemOperand. Previously, we were missing the first operand,
making the store size seem smaller than it really is.
Differential Revision: https://reviews.llvm.org/D52816
llvm-svn: 345631
Summary: Previously if we had a bitcast vector output type that needs promotion and a vector input type that needs widening we would just do a stack store and load to handle the conversion. We can do a little better if we can widen the bitcast to a legal vector type the same size as the widened input type. Then we can do the bitcast between this widened type and the widened input type. Afterwards we can extract_subvector back to the original output and any_extend that. Type legalization will then circle back and handle promotion of the extract_subvector and the any_extend will just be removed. This will avoid going through the stack and allows us to remove a custom version of this legalization from X86.
Reviewers: efriedma, RKSimon
Reviewed By: efriedma
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53229
llvm-svn: 345567
If a function has target features, it may contain instructions that aren't
represented in the default set of instructions. If the outliner pulls out one
of these instructions, and the function doesn't have the right attributes
attached, we'll run into an LLVM error explaining that the target doesn't
support the necessary feature for the instruction.
This makes outlined functions inherit target features from their parents.
It also updates the machine-outliner.ll test to check that we're properly
inheriting target features.
llvm-svn: 345535
- Relex hard coded registers and stack frame sizes
- Some test cleanups
- Change phi-dbg.ll to match on mir output after phi elimination instead
of going through the whole codegen pipeline.
This is in preparation for https://reviews.llvm.org/D52010
I'm committing all the test changes upfront that work before and after
independently.
llvm-svn: 345532
- Add support to generate AUTIBSP, PACIBSP, RETAB instructions for return
address signing
- The key used to sign the function is controlled by the function attribute
"sign-return-address-key"
Differential Revision: https://reviews.llvm.org/D51427
llvm-svn: 345511
Add ARM64 unwind codes to MCLayer, as well SEH directives that will be emitted
by the frame lowering patch to follow. We only emit unwind codes into object
object files for now.
Differential Revision: https://reviews.llvm.org/D50166
llvm-svn: 345450
Add LLVM intrinsics for the ARMv8.2-A FP16FML vector-form instructions. Add a
DAG pattern to define the indexed-form intrinsics in terms of the vector-form
ones, similarly to how the Dot Product intrinsics were implemented.
Based on a patch by Gao Yiling.
Differential Revision: https://reviews.llvm.org/D53632
llvm-svn: 345337
Include all of the store's source vector operands when creating the
MachineMemOperand. Previously, we were missing the first operand,
making the store size seem smaller than it really is.
Differential Revision: https://reviews.llvm.org/D52816
llvm-svn: 345315
Summary:
Currently, Legalizer is trying to lower G_LOAD with a vector type
that has more than two elements due to the incorrect LegalityPredicate.
This patch fixes the issue by removing the multiplication by 8
as `MemDesc.Size` already contains the size in bits.
Reviewers: dsanders, aemerson
Reviewed By: dsanders
Subscribers: rovka, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D53679
llvm-svn: 345282
If we have a 64-bit EXT where one of the operands is a subvector of a 128-bit
vector then in some cases we can eliminate an extract_subvector by converting
to a 128-bit EXT of the 128-bit vector.
Differential Revision: https://reviews.llvm.org/D53582
llvm-svn: 345275
Matt Arsenault