This patch handles usubsat patterns hidden through zext/trunc and uses the getTruncatedUSUBSAT helper to determine if the USUBSAT can be correctly performed in the truncated form:
zext(x) >= y ? x - trunc(y) : 0 --> usubsat(x,trunc(umin(y,SatLimit)))
zext(x) > y ? x - trunc(y) : 0 --> usubsat(x,trunc(umin(y,SatLimit)))
Based on original examples:
void foo(unsigned short *p, int max, int n) {
int i;
unsigned m;
for (i = 0; i < n; i++) {
m = *--p;
*p = (unsigned short)(m >= max ? m-max : 0);
}
}
Differential Revision: https://reviews.llvm.org/D25987
If extload is legal, following transform
(zext (select c, load1, load2)) -> (select c, zextload1, zextload2)
can save one ext instruction.
Differential Revision: https://reviews.llvm.org/D95086
Adjust generateFMAsInMachineCombiner to return false if SVE is present
in order to combine fmul+fadd into fma. Also add new pseudo instructions
so as to select the most appropriate of FMLA/FMAD depending on register
allocation.
Depends on D96599
Differential Revision: https://reviews.llvm.org/D96424
CheckInteger uses an int64_t encoded using a variable width encoding
that is optimized for encoding a number with a lot of leading zeros.
Negative numbers have no leading zeros so use the largest encoding
requiring 9 bytes.
I believe its most like we want to check for positive and negative
numbers near 0. -1 is quite common due to its use in the 'not'
idiom.
To optimize for this, we can borrow an idea from the bitcode format
and move the sign bit to bit 0 with the magnitude stored in the
upper bits. This will drastically increase the number of leading
zeros for small magnitudes. Then we can run this value through
VBR encoding.
This gives a small reduction in the table size on all in tree
targets except VE where size increased by about 300 bytes due
to intrinsic ids now requiring 3 bytes instead of 2. Since the
intrinsic enum space is shared by all targets this an unfortunate
consquence of where VE is currently located in the range.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D96317
Fold shuffle(bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))) -> bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))
Attempt to fold from a shuffle of a pair of binops to a binop of shuffles, as long as one/both of the binop sources are also shuffles that can be merged with the outer shuffle. This should guarantee that we remove one binop without introducing any additional shuffles.
Technically there's potential for a merged shuffle's lowering to be poorer than the original shuffle, but it could also be better, and I'm not seeing any regressions as long as we keep the 'don't merge splats' rule already present in MergeInnerShuffle.
This expands and generalizes an existing X86 combine and attempts to merge either of each binop's sources (with an on-the-fly commutation of the shuffle mask) - we couldn't do that in the x86 version as it had to stay in a form that DAGCombine's MergeInnerShuffle would still recognise.
Fixes issue raised by @saugustine in rG5aa8f4c0843a where we were failing to replace null shuffle operands from MergeInnerShuffle to UNDEFs.
Differential Revision: https://reviews.llvm.org/D96345
This reverts commit 5dfba562dd.
That commit causes an assertion failure with the following repro:
typedef long b __attribute__((__vector_size__(16)));
b *d;
b e;
b __attribute__((__always_inline__)) c(b h, b i) {
return (__attribute__((__vector_size__(8 * sizeof(short)))) short)h + i;
}
j() {
b k, l, m, n, o[6], p, q;
m = d[5];
b r = m;
b s = f(r, 8);
q = s;
l = d[1];
p = l;
t(q);
n = c(m, l);
o[1] = c(s, f(p, 8));
k = __builtin_shufflevector(n, o[1], 0, 2);
e = __builtin_ia32_psrlwi128(k, j);
}
./bin/clang -cc1 -triple x86_64-grtev4-linux-gnu -emit-obj -O1 -std=c99 test.c
Similar to D96622, we're better off just promoting uaddsat(x,y) -> umin(add(x,y),c) instead of trying to perform a shifted uaddsat.
I initially tried to just use shifted promotion in cases where we didn't have a legal/custom umin - but we don't appear to have any targets that have uaddsat but not umin, so imo we're better off always using the umin and avoid an untested shifted uaddsat code path.
Differential Revision: https://reviews.llvm.org/D96767
fde2466171 added support for
scalable vectors to matchUnaryPredicate by handling SPLAT_VECTOR in
addition to BUILD_VECTOR. This was used to enabled UDIV/SDIV/UREM/SREM
by constant expansion in BuildUDIV/BuildSDIV in TargetLowering.cpp
The caller there expects to call getBuildVector from the match factors.
This leads to a crash right now if there is a SPLAT_VECTOR of
fixed vectors since the number of vectors won't match the number
of elements.
To fix this, this patch updates the callers to check the opcode
instead of whether the type is fixed or scalable. This assumes
that only 3 opcodes are handled by matchUnaryPredicate so
I've added an assertion to the final else to check that opcode.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D96174
Fold shuffle(bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))) -> bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))
Attempt to fold from a shuffle of a pair of binops to a binop of shuffles, as long as one/both of the binop sources are also shuffles that can be merged with the outer shuffle. This should guarantee that we remove one binop without introducing any additional shuffles.
Technically there's potential for a merged shuffle's lowering to be poorer than the original shuffle, but it could also be better, and I'm not seeing any regressions as long as we keep the 'don't merge splats' rule already present in MergeInnerShuffle.
This expands and generalizes an existing X86 combine and attempts to merge either of each binop's sources (with an on-the-fly commutation of the shuffle mask) - we couldn't do that in the x86 version as it had to stay in a form that DAGCombine's MergeInnerShuffle would still recognise.
Differential Revision: https://reviews.llvm.org/D96345
If we're going to end up expanding anyway, we should do it early
so we don't create extra operations to handle the bytes added by
promotion.
Simlilar was done for BSWAP previously.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D96681
This patch adds a new intrinsic experimental.vector.reduce that takes a single
vector and returns a vector of matching type but with the original lane order
reversed. For example:
```
vector.reverse(<A,B,C,D>) ==> <D,C,B,A>
```
The new intrinsic supports fixed and scalable vectors types.
The fixed-width vector relies on shufflevector to maintain existing behaviour.
Scalable vector uses the new ISD node - VECTOR_REVERSE.
This new intrinsic is one of the named shufflevector intrinsics proposed on the
mailing-list in the RFC at [1].
Patch by Paul Walker (@paulwalker-arm).
[1] https://lists.llvm.org/pipermail/llvm-dev/2020-November/146864.html
Differential Revision: https://reviews.llvm.org/D94883
In the future Windows will enable Control-flow Enforcement Technology (CET aka shadow stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
This change allows llvm to generate the section that contains the appropriate symbol references in the form expected by the msvc linker.
This feature is enabled through a new module flag, ehcontguard, which was modelled on the cfguard flag.
The change includes a test that when the module flag is enabled the section is correctly generated.
The set of exception continuation information includes returns from exceptional control flow (catchret in llvm).
In order to collect catchret we:
1) Includes an additional flag on machine basic blocks to indicate that the given block is the target of a catchret operation,
2) Introduces a new machine function pass to insert and collect symbols at the start of each block, and
3) Combines these targets with the other EHCont targets that were already being collected.
Change originally authored by Daniel Frampton <dframpto@microsoft.com>
For more details, see MSVC documentation for `/guard:ehcont`
https://docs.microsoft.com/en-us/cpp/build/reference/guard-enable-eh-continuation-metadata
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D94835
As discussed on D96413, as long as the promoted bits of the args are zero we can use the basic ISD::USUBSAT pattern directly, without the shifting like we do for other ops.
I think something similar should be possible for ISD::UADDSAT as well, which I'll look at later.
Also, create a ISD::USUBSAT node directly - this will be expanded back by the legalizer later on if necessary.
Differential Revision: https://reviews.llvm.org/D96622
We lost this in D56387/rG69bc0990a9181e6eb86228276d2f59435a7fae67 - where I got the src/dst bitwidths mixed up and assumed getValidShiftAmountConstant would catch it.
Patch by @craig.topper - confirmed by @Carrot that it fixes PR49162
Begin transitioning the X86 vector code to recognise sub(umax(a,b) ,b) or sub(a,umin(a,b)) USUBSAT patterns to make it more generic and available to all targets.
This initial patch just moves the basic umin/umax patterns to DAG, removing some vector-only checks on the way - these are some of the patterns that the legalizer will try to expand back to so we can be reasonably relaxed about matching these pre-legalization.
We can handle the trunc(sub(..))) variants as well, which helps with patterns where we were promoting to a wider type to detect overflow/saturation.
The remaining x86 code requires some cleanup first - some of it isn't actually tested etc. I also need to resurrect D25987.
Differential Revision: https://reviews.llvm.org/D96413
explicitly emitting retainRV or claimRV calls in the IR
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
If we wait until the type is legalized, we'll lose information
about the orginal type and need to use larger magic constants.
This gets especially bad on RISCV64 where i64 is the only legal
type.
I've limited this to simple scalar types so it only works for
i8/i16/i32 which are most likely to occur. For more odd types
we might want to do a small promotion to a type where MULH is legal
instead.
Unfortunately, this does prevent some urem/srem+seteq matching since
that still require legal types.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D96210
As for SETCC, use a less expensive condition code when generating
STRICT_FSETCC if the node is known not to have Nan.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91972
This commit moves a line in SelectionDAGBuilder::handleDebugValue to
avoid implicitly casting a TypeSize object to an unsigned earlier than
necessary. It was possible that we bail out of the loop before the value
is ever used, which means we could create a superfluous TypeSize
warning.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D96423
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
Avoid doing the following combine for vector types:
```
copysign(x, fp_extend(y)) -> copysign(x, y)
copysign(x, fp_round(y)) -> copysign(x, y)
```
That combine seemed to impede the selection of vector instruction and cause
a mess in some circumstances.
Differential Revision: https://reviews.llvm.org/D96037
As of commit 284f2bffc9, the DAG Combiner gets rid of the masking of the
input to this node if the mask only keeps the bottom 16 bits. This is because
the underlying library function does not use the high order bits. However, on
PowerPC's ELFv2 ABI, it is the caller that is responsible for clearing the bits
from the register. Therefore, the library implementation of __gnu_h2f_ieee will
return an incorrect result if the bits aren't cleared.
This combine is desired for ARM (and possibly other targets) so this patch adds
a query to Target Lowering to check if this zeroing needs to be kept.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=49092
Differential revision: https://reviews.llvm.org/D96283
As for SETCC, use a less expensive condition code when generating
STRICT_FSETCC if the node is known not to have Nan.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91972
Make sure scalable property is preserved by using getVectorElementCount().
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D95967
emitting retainRV or claimRV calls in the IR
This reapplies 3fe3946d9a without the
changes made to lib/IR/AutoUpgrade.cpp, which was violating layering.
Original commit message:
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
emitting retainRV or claimRV calls in the IR
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
If sext_inreg is supported, we will turn this into sext_inreg. That
will then remove it if there are enough sign bits. But if sext_inreg
isn't supported, we can still remove the shift pair based on sign
bits.
Split from D95890.
The AArch64 DAG combine added by D90945 & D91433 extends the index
of a scalable masked gather or scatter to i32 if necessary.
This patch removes the combine and instead adds shouldExtendGSIndex, which
is used by visitMaskedGather/Scatter in SelectionDAGBuilder to query whether
the index should be extended before calling getMaskedGather/Scatter.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D94525
To set non-default rounding mode user usually calls function 'fesetround'
from standard C library. This way has some disadvantages.
* It creates unnecessary dependency on libc. On the other hand, setting
rounding mode requires few instructions and could be made by compiler.
Sometimes standard C library even is not available, like in the case of
GPU or AI cores that execute small kernels.
* Compiler could generate more effective code if it knows that a particular
call just sets rounding mode.
This change introduces new IR intrinsic, namely 'llvm.set.rounding', which
sets current rounding mode, similar to 'fesetround'. It however differs
from the latter, because it is a lower level facility:
* 'llvm.set.rounding' does not return any value, whereas 'fesetround'
returns non-zero value in the case of failure. In glibc 'fesetround'
reports failure if its argument is invalid or unsupported or if floating
point operations are unavailable on the hardware. Compiler usually knows
what core it generates code for and it can validate arguments in many
cases.
* Rounding mode is specified in 'fesetround' using constants like
'FE_TONEAREST', which are target dependent. It is inconvenient to work
with such constants at IR level.
C standard provides a target-independent way to specify rounding mode, it
is used in FLT_ROUNDS, however it does not define standard way to set
rounding mode using this encoding.
This change implements only IR intrinsic. Lowering it to machine code is
target-specific and will be implemented latter. Mapping of 'fesetround'
to 'llvm.set.rounding' is also not implemented here.
Differential Revision: https://reviews.llvm.org/D74729
If we're going to end up expanding anyway, we should do it early
so we don't create extra operations to handle the bytes added by
promotion.
This is helfpul on RISCV where we might have to promote i16 all
the way to i64.
Differential Revision: https://reviews.llvm.org/D95756
RISCV has to use 2 shifts for (i64 (zext_inreg X, i32)), but we
can use addiw rd, rs1, x0 for sext_inreg. We already understood this
when type legalizing i32 seteq/ne on rv64. But this transform in
SimplifySetCC would sometimes undo it.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D95289
This patch adds support for scalable-vector splats in DAGCombiner's
`isConstantOrConstantVector` and `ISD::matchUnaryPredicate` functions,
which enable the SelectionDAG div/rem-by-constant optimizations for
scalable vector types.
It also fixes up one case where the UDIV optimization was generating a
SETCC without first consulting the target for its preferred SETCC result
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94501
For now, we correct the result for sqrt if iteration > 0. This doesn't make
sense as they are not strict relative.
Reviewed By: dmgreen, spatel, RKSimon
Differential Revision: https://reviews.llvm.org/D94480
InstrEmitter.h needs TargetMachine but relies on a forward declaration
of TargetMachine in MachineOperand.h. This patch adds a forward
declaration right in InstrEmitter.h.
While we are at it, this patch removes the one in MachineOperand.h,
where it is unnecessary.
Noticed while I was touching other nearby code. I don't have a
test where this matters because the targets I work on
use zero or one boolean contents. And the tests cases I've seen
this fire on happen before type legalization where the result type
is MVT::i1 so the distinction doesn't matter.
There was code to handle the first operand being different than
the result type. And code to handle first operand having the
same type as the type to extend from. This should never happen
for a correctly formed SIGN_EXTEND_INREG. I've replace the
code with asserts.
I also noticed we created the same APInt twice so I've reused it.
Add DemandedElts support inside the TRUNCATE analysis.
REAPPLIED - this was reverted by @hans at rGa51226057fc3 due to an issue with vector shift amount types, which was fixed in rG935bacd3a724 and an additional test case added at rG0ca81b90d19d
Differential Revision: https://reviews.llvm.org/D56387
As noticed on D56387, for vectors we must always correctly adjust the shift amount type during truncation (not just after legalization). We were getting away with it as we currently only accepted scalars via the dyn_cast<ConstantSDNode>.
It caused "Vector shift amounts must be in the same as their first arg"
asserts in Chromium builds. See the code review for repro instructions.
> Add DemandedElts support inside the TRUNCATE analysis.
>
> Differential Revision: https://reviews.llvm.org/D56387
This reverts commit cad4275d69.
This recommits 2c51bef76c.
I've fixed the broken check line from when I renamed the test function.
Original commit message:
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
Differential Revision: https://reviews.llvm.org/D94149
Use the KnownBits icmp comparisons to determine when a ISD::UMIN/UMAX op is unnecessary should either op be known to be ULT/ULE or UGT/UGE than the other.
Differential Revision: https://reviews.llvm.org/D94532
This patch promotes result integer type of FP_TO_XINT in expanding.
So crash in conversion from ppc_fp128 to i1 will be fixed.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92473
This is a follow-up fix to commit 03c8d6a0c4.
Seems like we now end up with NeedInvert being set in the result
from LegalizeSetCCCondCode more often than in the past, so we
need to handle NeedInvert when expanding BR_CC.
Not sure how to deal with the "Tmp4.getNode()" case properly,
but current assumption is that that code path isn't impacted
by the changes in 03c8d6a0c4 so we can simply move
the old assert into the if-branch and only handle NeedInvert in the
else-branch.
I think that the test case added here, for PowerPC, might have
failed also before commit 03c8d6a0c4. But we started
to hit the assert more often downstream when having merged that
commit.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94762
The ``llvm.experimental.noalias.scope.decl`` intrinsic identifies where a noalias
scope is declared. When the intrinsic is duplicated, a decision must
also be made about the scope: depending on the reason of the duplication,
the scope might need to be duplicated as well.
Reviewed By: nikic, jdoerfert
Differential Revision: https://reviews.llvm.org/D93039
This 'FIXME' popped up in the development of an out-of-tree backend.
Quick fix, but first llvm upstream patch, therefore I do not have commit rights, so if approved please commit?
- Test is not included as this came up in an out-of-tree backend (if required, please hint on how to test this).
Patch by simveg (Simon)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93219
These methods are recursive so a little costly.
We only look at the result in one place in this function and it's
conditional. We also only need the second call if the first had
enough returned enough sign bits.
MergeInnerShuffle currently attempts to merge shuffle(shuffle(x,y),z) patterns into a single shuffle, using 1 or 2 of the x,y,z ops.
However if we already match 2 ops we might be able to handle the third op if its also a shuffle that references one of the previous ops, allowing us to handle some cases like:
shuffle(shuffle(x,y),shuffle(x,y))
shuffle(shuffle(shuffle(x,z),y),z)
shuffle(shuffle(x,shuffle(x,y)),z)
etc.
This isn't an exhaustive match and is dependent on the order the candidate ops are encountered - if one of the matched ops was a shuffle that was peek-able we don't go back and try to split that, I haven't found much need for that amount of analysis yet.
This is a preliminary patch that will allow us to later improve x86 HADD/HSUB matching - but needs to be reviewed separately as its in generic code and affects existing Thumb2 tests.
Differential Revision: https://reviews.llvm.org/D94671
Even if we know nothing about LHS, it can still be useful to know that
smax(LHS, RHS) >= RHS and smin(LHS, RHS) <= RHS.
Differential Revision: https://reviews.llvm.org/D87145
I'm hoping to reuse MergeInnerShuffle in some other folds - so ensure the candidate ops/mask are reset at the start of each run.
Also, move the second op matching before bailing to make it simpler to try to match other things afterward.
Default value is not changed, so it is NFC actually.
The option allows to use gc values on registers in landing pads.
Reviewers: reames, dantrushin
Reviewed By: reames, dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D94469
This patch resolves the suboptimal codegen described in http://llvm.org/pr47873 .
When CodeGenPrepare lowers select into a conditional branch, a freeze instruction is inserted.
It is then translated to `BRCOND(FREEZE(SETCC))` in SelDag.
The `FREEZE` in the middle of `SETCC` and `BRCOND` was causing a suboptimal code generation however.
This patch adds `BRCOND(FREEZE(cond))` -> `BRCOND(cond)` fold to DAGCombiner to remove the `FREEZE`.
To make this optimization sound, `BRCOND(UNDEF)` simply should nondeterministically jump to the branch or not, rather than raising UB.
It wasn't clear what happens when the condition was undef according to the comments in ISDOpcodes.h, however.
I updated the comments of `BRCOND` to make it explicit (as well as `BR_CC`, which is also a conditional branch instruction).
Note that it diverges from the semantics of `br` instruction in IR, which is explicitly UB.
Since the UB semantics was necessary to explain optimizations that use branching conditions, and SelDag doesn't seem to have such optimization, I think this divergence is okay.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D92015
If SETO/SETUO aren't legal, they'll be expanded and we'll end up
with 3 comparisons.
SETONE is equivalent to (SETOGT || SETOLT)
so if one of those operations is supported use that expansion. We
don't need both since we can commute the operands to make the other.
SETUEQ can be implemented with !(SETOGT || SETOLT) or (SETULE && SETUGE).
I've only implemented the first because it didn't look like most of the
affected targets had legal SETULE/SETUGE.
Reviewed By: frasercrmck, tlively, nemanjai
Differential Revision: https://reviews.llvm.org/D94450
Now that we flush the local value map for every instruction, we don't
need any extra flushes for specific cases. Also, LastFlushPoint is
not used for anything. Follow-ups to #c161665 (D91734).
This reapplies #3fd39d3.
Differential Revision: https://reviews.llvm.org/D92338
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
We are checking the unsafe-fp-math for sqrt but not for fpow, which behaves inconsistent.
As the direction is to remove this global option, we need to remove the unsafe-fp-math
check for sqrt and update the test with afn fast-math flags.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D93891
This improves llvm::isConstOrConstSplat by allowing it to analyze
ISD::SPLAT_VECTOR nodes, in order to allow more constant-folding of
operations using scalable vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94168
The TableGen immAllOnesV and immAllZerosV helpers implicitly wrapped the
ISD::isBuildVectorAll(Ones|Zeros) helper functions. This was inhibiting
their use for targets such as RISC-V which use ISD::SPLAT_VECTOR. In
particular, RISC-V had to define its own 'vnot' fragment.
In order to extend the scope of these nodes to include support for
ISD::SPLAT_VECTOR, two new ISD predicate functions have been introduced:
ISD::isConstantSplatVectorAll(Ones|Zeros). These effectively supersede
the older "isBuildVector" predicates, which are now simple wrappers for
the new functions. They pass a defaulted boolean toggle which preserves
the old behaviour. It is hoped that in time all call-sites can be ported
to the "isConstantSplatVector" functions.
While the use of ISD::isBuildVectorAll(Ones|Zeros) has not changed, the
behaviour of the TableGen immAll(Ones|Zeros)V **has**. To test the new
functionality, the custom RISC-V TableGen fragment has been removed and
replaced with the built-in 'vnot'. To test their use as pattern-roots, two
splat patterns have been updated accordingly.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94223
This implements basic instructions for the new spec.
- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds support for instruction selection for the new instructions
- `catch` needs a custom routine for the same reason `throw` needs one,
to encode `__cpp_exception` tag symbol.
- Updates `WebAssembly::isCatch` utility function to include `catch_all`
and Change code that compares an instruction's opcode with `catch` to
use that function.
- LateEHPrepare
- Previously in LateEHPrepare we added `catch` instruction to both
`catchpad`s (for user catches) and `cleanuppad`s (for destructors).
In the new version `catch` is generated from `llvm.catch` intrinsic
in instruction selection phase, so we only need to add `catch_all`
to the beginning of cleanup pads.
- `catch` is generated from instruction selection, but we need to
hoist the `catch` instruction to the beginning of every EH pad,
because `catch` can be in the middle of the EH pad or even in a
split BB from it after various code transformations.
- Removes `addExceptionExtraction` function, which was used to
generate `br_on_exn` before.
- CFGStackfiy: Deletes `fixUnwindMismatches` function. Running this
function on the new instruction causes crashes, and the new version
will be added in a later CL, whose contents will be completely
different. So deleting the whole function will make the diff easier to
read.
- Reenables all disabled tests in exception.ll and eh-lsda.ll and a
single basic test in cfg-stackify-eh.ll.
- Updates existing tests to use the new assembly format. And deletes
`br_on_exn` instructions from the tests and FileCheck lines.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94040
`wasm_rethrow_in_catch` intrinsic and builtin are used in order to
rethrow an exception when the exception is caught but there is no
matching clause within the current `catch`. For example,
```
try {
foo();
} catch (int n) {
...
}
```
If the caught exception does not correspond to C++ `int` type, it should
be rethrown. These intrinsic/builtin were renamed `rethrow_in_catch`
because at the time I thought there would be another intrinsic for C++'s
`throw` keyword, which rethrows an exception. It turned out that `throw`
keyword doesn't require wasm's `rethrow` instruction, so we rename
`rethrow_in_catch` to just `rethrow` here.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94038
This implements vp_add, vp_and for the VE target by lowering them to the
VVP_* layer. We also add helper functions for VP SDNodes (isVPSDNode,
getVPMaskIdx, getVPExplicitVectorLengthIdx).
Reviewed By: kaz7
Differential Revision: https://reviews.llvm.org/D93766
Attempt to simplify all/any-of style patterns that concatenate 2 smaller integers together into an and(x,y)/or(x,y) + icmp 0/-1 instead.
This is mainly to help some bool predicate reduction patterns where we end up concatenating bool vectors that have been bitcasted to integers.
Differential Revision: https://reviews.llvm.org/D93599
This looks to have been done to save some duplicated code under
two different if statements, but it ends up being harmful to D94073.
This speculative constant can be called on a scalable vector type
with i64 element size when i64 scalars aren't legal. The code tries
and fails to find a vector type with i32 elements that it can use.
So only create the node when we know it will be used.
This patch disables the FSUB(-0,X)->FNEG(X) DAG combine when we're flushing subnormals. It requires updating the existing AMDGPU tests to use the fneg IR instruction, in place of the old fsub(-0,X) canonical form, since AMDGPU is the only backend currently checking the DenormalMode flags.
Note that this will require follow-up optimizations to make sure the FSUB(-0,X) form is handled appropriately
Differential Revision: https://reviews.llvm.org/D93243
Recently a few patches are made to move towards using select i1 instead of and/or i1 to represent "a && b"/"a || b" in C/C++.
"a && b" in C/C++ does not evaluate b if a is false whereas 'and a, b' in IR evaluates b and uses its result regardless of the result of a.
This is problematic because it can cause miscompilation if b was an erroneous operation (https://llvm.org/pr48353).
In C/C++, the result is simply false because b is not evaluated, but in IR the result is poison.
The discussion at D93065 has more context about this.
This patch makes two branch-splitting optimizations (one in SelectionDAGBuilder, one in CodeGenPrepare) recognize
select form of and/or as well using m_LogicalAnd/Or.
Since it is CodeGen, I think this is semantically ok (at least as safe as what codegen already did).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93853
Fixes a bug introduced by D91589.
When folding `(sext (not i1 x)) -> (add (zext i1 x), -1)`, we try to replace the not first when possible. If we replace the not in-visit, then the now invalidated node will be returned, and subsequently we will return an invalid sext. In cases where the not is replaced in-visit we can simply return SDValue, as the not in the current sext should have already been replaced.
Thanks @jgorbe, for finding the below reproducer.
The following reduced test case crashes clang when built with `clang -O1 -frounding-math`:
```
template <class> class a {
int b() { return c == 0.0 ? 0 : -1; }
int c;
};
template class a<long>;
```
A debug build of clang produces this "assertion failed" error:
```
clang: /home/jgorbe/code/llvm/llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:264: void {anonymous}::DAGCombiner::AddToWorklist(llvm::
SDNode*): Assertion `N->getOpcode() != ISD::DELETED_NODE && "Deleted Node added to Worklist"' failed.
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93274
When LegalizeType procedure widens a masked_gather, set MemoryType's EltNum equal to Result's EltNum.
As I mentioned in https://reviews.llvm.org/D91092, in previous code, If we have a v17i32's masked_gather in avx512, we widen it to a v32i32's masked_gather with a v17i32's MemoryType. When the SplitVecRes_MGATHER process this v32i32's masked_gather, GetSplitDestVTs will assert fail since what you are going to split is v17i32.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93610
Currently we lower invokes the same way as usual calls, e.g.:
V1 = STATEPOINT ... V (tied-def 0)
But this is incorrect is V1 is used on exceptional path.
By LLVM rules V1 neither dominates its uses in landing pad, nor
its live range is live on entry to landing pad. So compiler is
allowed to do various weird transformations like splitting live
range after statepoint and use split LR in catch block.
Until (and if) we find better solution to this problem, let's
use old lowering (spilling) for those values which are used on
exceptional path and allow VReg lowering for values used only
on normal path.
Differential Revision: https://reviews.llvm.org/D93449
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
Clean up a TODO, to support folding a shift of a constant by a
select of constants, on targets with different shift operand sizes.
Reviewed By: RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D90349
Subvector broadcasts are only load instructions, yet X86ISD::SUBV_BROADCAST treats them more generally, requiring a lot of fallback tablegen patterns.
This initial patch replaces constant vector lowering inside lowerBuildVectorAsBroadcast with direct X86ISD::SUBV_BROADCAST_LOAD loads which helps us merge a number of equivalent loads/broadcasts.
As well as general plumbing/analysis additions for SUBV_BROADCAST_LOAD, I needed to wrap SelectionDAG::makeEquivalentMemoryOrdering so it can handle result chains from non generic LoadSDNode nodes.
Later patches will continue to replace X86ISD::SUBV_BROADCAST usage.
Differential Revision: https://reviews.llvm.org/D92645
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
Currently the backend special cases x86_intrcc and treats the first
parameter as byval. Make the IR require byval for this parameter to
remove this special case, and avoid the dependence on the pointee
element type.
Fixes bug 46672.
I'm not sure the IR is enforcing all the calling convention
constraints. clang seems to ignore the attribute for empty parameter
lists, but the IR tolerates it.
Changes in this patch:
- Minor changes to the LowerVECREDUCE_SEQ_FADD function added by @cameron.mcinally
to also work for scalable types
- Added TableGen patterns for FP reductions with unpacked types (nxv2f16, nxv4f16 & nxv2f32)
- Asserts added to expandFMINNUM_FMAXNUM & expandVecReduceSeq for scalable types
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D93050
This function is needed for when it is necessary to split the subvector
operand of an llvm.experimental.vector.insert call. Splitting the
subvector operand means performing two insertions: one inserting the
lower part of the split subvector into the destination vector, and
another for inserting the upper part.
Through experimenting, it seems quite rare to need split the subvector
operand, but this is necessary to avoid assertion errors.
Differential Revision: https://reviews.llvm.org/D92760
If SETUNE isn't legal, UO can use the NOT of the SETO expansion.
Removes some complex isel patterns. Most of the test changes are
from using XORI instead of SEQZ.
Differential Revision: https://reviews.llvm.org/D92008
This method previously always recursively checked both the left-hand
side and right-hand side of binary operations for splatted (broadcast)
vector values to determine if the parent DAG node is a splat.
Like several other SelectionDAG methods, limit the recursion depth to
MaxRecursionDepth (6). This prevents stack overflow.
See also https://issuetracker.google.com/173785481
Patch by Nicolas Capens. Thanks!
Differential Revision: https://reviews.llvm.org/D92421
This patch adds the following DAGCombines, which apply if isVectorLoadExtDesirable() returns true:
- fold (and (masked_gather x)) -> (zext_masked_gather x)
- fold (sext_inreg (masked_gather x)) -> (sext_masked_gather x)
LowerMGATHER has also been updated to fetch the LoadExtType associated with the
gather and also use this value to determine the correct masked gather opcode to use.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92230
Adds the ExtensionType flag, which reflects the LoadExtType of a MaskedGatherSDNode.
Also updated SelectionDAGDumper::print_details so that details of the gather
load (is signed, is scaled & extension type) are printed.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91084
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
LLVM intrinsic llvm.maxnum|minnum is overloaded intrinsic, can be used on any
floating-point or vector of floating-point type.
This patch extends current infrastructure to support scalable vector type.
This patch also fix a warning message of incorrect use of EVT::getVectorNumElements()
for scalable type, when DAGCombiner trying to split scalable vector.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92607
Sometimes people get minimal crash reports after a UBSAN incident. This change
tags each trap with an integer representing the kind of failure encountered,
which can aid in tracking down the root cause of the problem.
The refineIndexType & refineUniformBase functions added by D90942 can also be used to
improve CodeGen of masked gathers.
These changes were split out from D91092
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92319
Lowers the llvm.masked.gather intrinsics (scalar plus vector addressing mode only)
Changes in this patch:
- Add custom lowering for MGATHER, using getGatherVecOpcode() to choose the appropriate
gather load opcode to use.
- Improve codegen with refineIndexType/refineUniformBase, added in D90942
- Tests added for gather loads with 32 & 64-bit scaled & unscaled offsets.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91092
In previous code, when refineIndexType(...) is called and Index is undef, Index.getOperand(0) will raise a assertion fail.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D92548
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
1. Removed #include "...AliasAnalysis.h" in other headers and modules.
2. Cleaned up includes in AliasAnalysis.h.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92489
An indirect call site needs to be probed for its potential call targets. With CSSPGO a direct call also needs a probe so that a calling context can be represented by a stack of callsite probes. Unlike pseudo probes for basic blocks that are in form of standalone intrinsic call instructions, pseudo probes for callsites have to be attached to the call instruction, thus a separate instruction would not work.
One possible way of attaching a probe to a call instruction is to use a special metadata that carries information about the probe. The special metadata will have to make its way through the optimization pipeline down to object emission. This requires additional efforts to maintain the metadata in various places. Given that the `!dbg` metadata is a first-class metadata and has all essential support in place , leveraging the `!dbg` metadata as a channel to encode pseudo probe information is probably the easiest solution.
With the requirement of not inflating `!dbg` metadata that is allocated for almost every instruction, we found that the 32-bit DWARF discriminator field which mainly serves AutoFDO can be reused for pseudo probes. DWARF discriminators distinguish identical source locations between instructions and with pseudo probes such support is not required. In this change we are using the discriminator field to encode the ID and type of a callsite probe and the encoded value will be unpacked and consumed right before object emission. When a callsite is inlined, the callsite discriminator field will go with the inlined instructions. The `!dbg` metadata of an inlined instruction is in form of a scope stack. The top of the stack is the instruction's original `!dbg` metadata and the bottom of the stack is for the original callsite of the top-level inliner. Except for the top of the stack, all other elements of the stack actually refer to the nested inlined callsites whose discriminator field (which actually represents a calliste probe) can be used together to represent the inline context of an inlined PseudoProbeInst or CallInst.
To avoid collision with the baseline AutoFDO in various places that handles dwarf discriminators where a check against the `-pseudo-probe-for-profiling` switch is not available, a special encoding scheme is used to tell apart a pseudo probe discriminator from a regular discriminator. For the regular discriminator, if all lowest 3 bits are non-zero, it means the discriminator is basically empty and all higher 29 bits can be reversed for pseudo probe use.
Callsite pseudo probes are inserted in `SampleProfileProbePass` and a target-independent MIR pass `PseudoProbeInserter` is added to unpack the probe ID/type from `!dbg`.
Note that with this work the switch -debug-info-for-profiling will not work with -pseudo-probe-for-profiling anymore. They cannot be used at the same time.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91756
Simon Pilgrim