We have some cases today where attributes can be inferred from another on access, but the result is not explicitly materialized in IR. This change is a step towards changing that.
Why? Two main reasons:
* Human clarity. It's really confusing trying to figure out why a transform is triggering when the IR doesn't appear to have the required attributes.
* This avoids the need to special case declarations in e.g. functionattrs. Since we can assume the attribute is present, we can work directly from attributes (and only attributes) without also needing to query accessors on Function to avoid missing cases due to unannotated (but infered on use) declarations. (This piece will appear must easier to follow once D100226 also lands.)
Differential Revision: https://reviews.llvm.org/D100400
Removes the builtins and intrinsics used to opt in to using these instructions
and replaces them with normal ISel patterns now that they are no longer
prototypes.
Differential Revision: https://reviews.llvm.org/D100402
Currently, the InstCombineCompare is combining two add operations
into a single add operation which always has a nsw flag, without
checking the conditions to see if this flag should be present
according to the original two add operations or not.
This patch will change the InstCombineCompare to emit the nsw or
nuw only when these flags are allowed to be generated according to
the original add operations and remove the possibility of applying
wrong optimization with passes that will perform on the IR later
in the pipeline.
To confirm that the current results are buggy and the results after
proposed patch are the correct IR the following examples from Alive2
are attached; the same results can be seen in the case of nuw flag
and nsw is just used as an example. The following link shows that
the generated IR with current LLVM is a buggy IR when none of the
original add operations have nsw flag.
https://alive2.llvm.org/ce/z/WGaDrm
The following link proves that the generated IR after the patch in
the former case is the correct IR.
https://alive2.llvm.org/ce/z/wQ7G_e
Differential Revision: https://reviews.llvm.org/D100095
SROA shifts TBAA nodes in a way that may present a problem for !tbaa but not !tbaa.struct nodes.
Differential Revision: https://reviews.llvm.org/D99851
Add a custom DAG combine and ISD opcode for detecting patterns like
(uint_to_fp (extract_subvector ...))
before the extract_subvector is expanded to ensure that they will ultimately
lower to f64x2.convert_low_i32x4_{s,u} instructions. Since these instructions
are no longer prototypes and can now be produced via standard IR, this commit
also removes the target intrinsics and builtins that had been used to prototype
the instructions.
Differential Revision: https://reviews.llvm.org/D100425
Just like in the mul nuw case, it's sufficient that the step is
non-zero. If the step is negative, then the values will jump
between positive and negative, "crossing" zero, but the value of
the recurrence is never actually zero.
It's okay if the step is zero, we'll just stay at the same non-zero
value in that case. The valuable part of this is that the step
doesn't even need to be a constant anymore.
This is a service function generally useful for selection
of a FI in an SADDR. NFC for now, needed for future patch.
Differential Revision: https://reviews.llvm.org/D100406
Now that these instructions are no longer prototypes, we do not need to be
careful about keeping them opt-in and can use the standard LLVM infrastructure
for them. This commit removes the bespoke intrinsics we were using to represent
these operations in favor of the corresponding target-independent intrinsics.
The clang builtins are preserved because there is no standard way to easily
represent these operations in C/C++.
For consistency with the scalar codegen in the Wasm backend, the intrinsic used
to represent {f32x4,f64x2}.nearest is @llvm.nearbyint even though
@llvm.roundeven better captures the semantics of the underlying Wasm
instruction. Replacing our use of @llvm.nearbyint with use of @llvm.roundeven is
left to a potential future patch.
Differential Revision: https://reviews.llvm.org/D100411
This transformation is fundamentally broken when it comes to dominance,
it just happened to work when the source of the memcpy can be moved into
the place of the alloca. The bug shows up a lot more often since
077bff39d4 allows the source to be a
switch.
It would be possible to check dominance of the source and all its
operands, but that seems very heavy for instcombine.
Rename the name of "LDS lowering" pass from `amdgpu-disable-lower-module-lds` to
`amdgpu-enable-lower-module-lds` as later is consistent and reads better.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D100441
In the fold SHUFFLE(BINOP(X,Y),BINOP(Z,W)) -> BINOP(SHUFFLE(X,Z),SHUFFLE(Y,W)), check if both X/Z AND Y/W have at least one merge-able shuffle in which case the total number of shuffle should still fall.
Helps with instruction count regressions we saw while fixing PR48823
Only attempt to propagateIRFlags if we have both SelectInst - afaict we shouldn't have matched a min/max reduction without both SelectInst, but static analyzer doesn't know that.
The existing BTI placement pass avoids inserting "BTI c" when the
function has local linkage and is only directly called. However,
even in this case, there is a (small) chance that the linker later
adds a hunk with an indirect call to the function, e.g. if the
function is placed in a separate section and moved far away from
its callers. Make sure to add BTI for these functions too.
Differential Revision: https://reviews.llvm.org/D99417
This refactors SCCP and creates a SCCPSolver interface and class so that it can
be used by other passes and transformations. We will use this in D93838, which
adds a function specialisation pass.
This is based on an early version by Vinay Madhusudan.
Differential Revision: https://reviews.llvm.org/D93762
Stepping through callstacks in the example from D99759 reveals
this potential compile-time improvement.
The savings come from avoiding ValueTracking's computing known
bits if we have already dealt with special-case patterns.
Further improvements in this direction seem possible.
This makes a degenerate test based on PR49785 about 40x faster
(25 sec -> 0.6 sec), but it does not address the larger question
of how to limit computeKnownBitsFromAssume(). Ie, the original
test there is still infinite-time for all practical purposes.
Differential Revision: https://reviews.llvm.org/D100408
Otherwise it reuses the same register for storing the stack slot
offset if the stack slot offset is big.
Differential Revision: https://reviews.llvm.org/D100461
The start value can't be null for something to be a non-zero
recurrence, so hoist that common check out of the switch.
Subsequent checks may be incomplete or over-specified as noted in:
D100408
After 077bff39d4,
isDereferenceableForAllocaSize() can recurse into selects,
which is causing a problem for the new test case,
reduced from https://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20210412/904154.html
because the replacement (the select) is defined after the first use
of an alloca, so we'd end up with a verifier error.
Now, this new check is too restrictive.
We likely can handle *some* cases, by trying to sink all uses of an alloca
to after the the def.
Extension to rG74f98391a7a4, we can also include any of the upper (known zero) bits in the comparison in the shuffle removal fold, just as long as we demand all the elements of the movmsk source vector.
This fixes breakage on Windows/ARM64 after D94355.
Modelled after the corresponding code for X86; not entirely familiar
with those aspects of that layer otherwise.
Differential Revision: https://reviews.llvm.org/D99572
Patchpoint instructions have operands which is actually zero cost
(or the same as register) to use the value from the stack.
In terms of statistic it makes same to separate them.
Move from computation instructions related to stack spill/reload to
number of stack slot referenced.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100016
Statepoint instruction has a deopt section which is actually live-through the call.
Currently this is handled by special post pass after RA - fixup-statepoint-caller-saved.
This change teaches Greedy RA that if segment of live interval is ended with statepoint
instruction and its reg is used in deopt bundle then this live interval interferes regmask of this statepoint
and as a result caller-saved register cannot be assigned to this live interval.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100296
M68kAsmParser uses `llvm::getTheM68kTarget` from M68kInfo, therefore we
should put M68kInfo as its direct dependency. Otherwise the build will
fail when building LLVM libraries as shared objects (building LLVM
libraries statically won't have this problem though).
This is a follow up of D99010. We didn't consider the live range of shape registers when hoist ldtilecfg. There maybe risks, e.g. we happen to insert it to an invalid range of some registers and get unexpected error.
This patch fixes this problem by storing the value to corresponding stack place of ldtilecfg after all its definition immediately.
This patch also fix a problem in previous code: If we don't have a ldtilecfg which dominates all AMX instructions, we cannot initialize shapes for other ldtilecfg.
There're still some optimization points left. E.g. eliminate unused mov instructions, break the def-use dependency before RA etc.
Reviewed By: LuoYuanke, xiangzhangllvm
Differential Revision: https://reviews.llvm.org/D99966
The VSX tablegen file has some rather eggregious uses of
COPY_TO_REGCLASS even in situations where it needs to use
SUBREG_TO_REG. While this produces correct code, it often doesn't
allow the register coalescer to coalesce copies and the resulting
code ends up being suboptimal. This patch just changes over
patterns that should use SUBREG_TO_REG.
This fixes the resolution of Rec10.Zero in ListSlices.td.
As part of this, correct the definition of complete for ListInit such that
it's complete iff all the elements in the list are complete rather than
always being complete regardless of the elements. This is the reason
Rec10.TwoFive from ListSlices.td previously resolved despite being
incomplete like Rec10.Zero was
Depends on D100247
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D100253
- Add support for HLASM style integers. These are the decimal integers [0-9].
- HLASM does not support the additional prefixed integers like, `0b`, `0x`, octal integers and Masm style integers.
- To achieve this, a field `LexHLASMStyleIntegers` (similar to the `LexMasmStyleIntegers` field) is introduced in `MCAsmLexer.h` as well as a corresponding setter.
Note: This field could also go into MCAsmInfo.h. I used the previous precedent set by the `LexMasmIntegers` field.
Depends on https://reviews.llvm.org/D99286
Reviewed By: epastor
Differential Revision: https://reviews.llvm.org/D99374
Currently, for any extern variable, if it doesn't have
section attribution, it will be put into a default ".extern"
btf DataSec. The initial design is to put every extern
variable in a DataSec so libbpf can use it.
But later on, libbpf actually requires extern variables
to put into special sections, e.g., ".kconfig", ".ksyms", etc.
so they can be used properly based on section name.
Andrii mentioned since ".extern" variables are
not actually used, it makes sense to remove it from
the compiler so libbpf does not need to deal with it,
esp. for static linking. The BTF for these extern variables
is still generated.
With this patch, I tested kernel selftests/bpf and all tests
passed. Indeed, removing ".extern" DataSec seems having no
impact.
Differential Revision: https://reviews.llvm.org/D100392
I've run into some cases where a large fraction of compile-time is
spent invalidating SCEV. One of the causes is forgetLoop(), which
walks all values that are def-use reachable from the loop header
phis. When invalidating a topmost loop, that might be close to all
values in a function. Additionally, it's fairly common for there to
not actually be anything to invalidate, but we'll still be performing
this walk again and again.
My first thought was that we don't need to continue walking the uses
if the current value doesn't have a SCEV expression. However, this
isn't quite right, because SCEV construction can skip over values
(e.g. for a chain of adds, we might only create a SCEV expression
for the final value).
What this patch does instead is to only walk the (full) def-use chain
of loop phis that have a SCEV expression. If there's no expression
for a phi, then we also don't have any dependent expressions to
invalidate.
Differential Revision: https://reviews.llvm.org/D100264
We already allow the comparison of the upper bits of 'IsAllOf' (allbits) patterns, but we can safely compare the known zero bits for 'IsAnyOf' (zerobits) patterns as well.
This fixes an issues where we are comparing a type wide than the number of vector elements, which avoids a regression mentioned in rGbaadbe04bf75.
- In the SystemZAsmParser, there will be a few queries to the type of dialect it is (AD_ATT, AD_HLASM) in future patches.
- It would be nice to have two small helper functions `isParsingATT()` and `isParsingHLASM()`
- Putting this as a separate smaller patch allows us to remove its definitions from other dependent patches.
Reviewed By: uweigand, abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D99891
For a global weak symbol defined as below:
char g __attribute__((weak)) = 2;
LLVM generates an allocated global with WeakAnyLinkage,
for which BPF backend generates proper BTF info.
For the above example, if a modifier "const" is added like
const char g __attribute__((weak)) = 2;
LLVM generates an allocated global with WeakODRLinkage,
for which BPF backend didn't generate any BTF as it
didn't handle WeakODRLinkage.
This patch addes support for WeakODRLinkage and proper
BTF info can be generated for weak symbol defined with
"const" modifier.
Differential Revision: https://reviews.llvm.org/D100362
- Currently, MCAsmInfo provides a CommentString attribute, that various targets can set, so that the AsmLexer can appropriately lex a string as a comment based on the set value of the attribute.
- However, AsmLexer also supports a few additional comment syntaxes, in addition to what's specified as a CommentString attribute. This includes regular C-style block comments (/* ... */), regular C-style line comments (// .... ) and #. While I'm not sure as to why this behaviour exists, I am assuming it does to maintain backward compatibility with GNU AS (see https://sourceware.org/binutils/docs/as/Comments.html#Comments for reference)
For example:
Consider a target which sets the CommentString attribute to '*'.
The following strings are all lexed as comments.
```
"# abc" -> comment
"// abc" -> comment
"/* abc */ -> comment
"* abc" -> comment
```
- In HLASM however, only "*" is accepted as a comment string, and nothing else.
- To achieve this, an additional attribute (`AllowAdditionalComments`) has been added to MCAsmInfo. If this attribute is set to false, then only the string specified by the CommentString attribute is used as a possible comment string to be lexed by the AsmLexer. The regular C-style block comments, line comments and "#" are disabled. As a final note, "#" will still be treated as a comment, if the CommentString attribute is set to "#".
Depends on https://reviews.llvm.org/D99277
Reviewed By: abhina.sreeskantharajan, myiwanch
Differential Revision: https://reviews.llvm.org/D99286
The IR stack protector pass must insert stack checks before the call instead of
between it and the return.
Similarly, SDAG one should recognize that ADJCALLFRAME instructions could be
part of the terminal sequence of a tail call. In this case because such call
frames cannot be nested in LLVM the stack protection code must skip over the
whole sequence (or risk clobbering argument registers).
This patch adds attributes corresponding to
implicits to functions/kernels if
1. it has an indirect call OR
2. it's address is taken.
Once such attributes are set, rest of the codegen would work
out-of-box for indirect calls. This patch eliminates
the potential overhead -fixed-abi imposes even though indirect functions
calls are not used.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D99347
As a side-effect of the change to default HoistCommonInsts to false
early in the pipeline, we fail to convert conditional branch & phis to
selects early on, which prevents vectorization for loops that contain
conditional branches that effectively are selects (or if the loop gets
vectorized, it will get vectorized very inefficiently).
This patch updates SimplifyCFG to perform hoisting if the only
instruction in both BBs is an equal branch. In this case, the only
additional instructions are selects for phis, which should be cheap.
Even though we perform hoisting, the benefits of this kind of hoisting
should by far outweigh the negatives.
For example, the loop in the code below will not get vectorized on
AArch64 with the current default, but will with the patch. This is a
fundamental pattern we should definitely vectorize. Besides that, I
think the select variants should be easier to use for reasoning across
other passes as well.
https://clang.godbolt.org/z/sbjd8Wshx
```
double clamp(double v) {
if (v < 0.0)
return 0.0;
if (v > 6.0)
return 6.0;
return v;
}
void loop(double* X, double *Y) {
for (unsigned i = 0; i < 20000; i++) {
X[i] = clamp(Y[i]);
}
}
```
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D100329
This is a work-in-progress implementation of an assembler for M68k.
Outstanding work:
- Updating existing tests assembly syntax
- Writing new tests for the assembler (and disassembler)
I've left those until there's consensus that this approach is okay (I hope that's okay!).
Questions I'm aware of:
- Should this use Motorola or gas syntax? (At the moment it uses Motorola syntax.)
- The disassembler produces a table at runtime for disassembly generated from the code beads. Is this okay? (This is less than ideal but as I mentioned in my llvm-dev post, it's quite complicated to write a table-gen parser for code beads.)
Depends on D98519
Depends on D98532
Depends on D98534
Depends on D98535
Depends on D98536
Differential Revision: https://reviews.llvm.org/D98537
Prep work for adding intrinsics in the future.
Left an assert that the input is constant in ReplaceNodeResults,
as the intrinsic shouldn't go through that path.
We should consider the feeder user number when we do reverse memory
operation transformation. Otherwise, we may get negative impact.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D100166
Lookup tables generate non PIC-friendly code, which requires dynamic relocation as described in:
https://bugs.llvm.org/show_bug.cgi?id=45244
This patch adds a new pass that converts lookup tables to relative lookup tables to make them PIC-friendly.
Differential Revision: https://reviews.llvm.org/D94355
Jump threading can replace select then unconditional branch with
conditional branch, but when doing so loses debug info.
This destructive transform is eventually leading to a failed Verifier
run during full LTO builds of the Linux kernel with CFI and KCOV
enabled, as reported in PR39531.
ModuleSanitizerCoveragePass will insert calls to
__sanitizer_cov_trace_pc, and sometimes split critical edges,
using whatever debug info may or may not exist for the branch for
the added libcall. Since we can inline calls to
__sanitizer_cov_trace_pc due to LTO, this can lead to the error
observed in PR39531 when the debug info isn't propagated to
the libcall, because of prior destructive transforms that failed to
retain debug info.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D100137
Turning on -fstrict-vtable-pointers in Chrome caused an extra global
initializer. Turns out that a llvm.strip.invariant.group intrinsic was
causing GlobalOpt to fail to step through some simple code.
We can treat *.invariant.group uses as simply their operand.
Value::stripPointerCastsForAliasAnalysis() does exactly this. This
should be safe because the Evaluator does not skip memory accesses due
to invariants or alias analysis.
However, we don't want to leak that we've stripped arbitrary pointer
casts to users of Evaluator, so we bail out if we evaluate a function to
any constant, since we may have looked through *.invariant.group calls
and aliasing pointers cannot be arbitrarily substituted.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D98843
Instruction::getDebugLoc can return an invalid DebugLoc. For such cases
where metadata was accidentally removed from the libcall insertion
point, simply insert a DILocation with line 0 scoped to the caller. When
we can inline the libcall, such as during LTO, then we won't fail a
Verifier check that all calls to functions with debug metadata
themselves must have debug metadata.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D100158
Currently the ARM backend only accpets constant expressions as the
immediate operand in load and store instructions. This allows the
result of symbolic expressions to be used in memory instructions. For
example,
0:
.space 2048
strb r2, [r0, #(.-0b)]
would be assembled into the following instructions.
strb r2, [r0, #2048]
This only adds support to ldr, ldrb, str, and strb in arm mode to
address the build failure of Linux kernel for now, but should facilitate
adding support to similar instructions in the future if the need arises.
Link:
https://github.com/ClangBuiltLinux/linux/issues/1329
Reviewed By: peter.smith, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D98916
Retry of 330619a3a6 that includes a clang test update.
Original commit message:
If we run passes before lowering llvm.expect intrinsics to metadata,
then those passes have no way to act on the hints provided by llvm.expect.
SimplifyCFG is the known offender, and we made it smarter about profile
metadata in D98898 <https://reviews.llvm.org/D98898>.
In the motivating example from https://llvm.org/PR49336 , this means we
were ignoring the recommended method for a programmer to tell the compiler
that a compare+branch is expensive. This change appears to solve that case -
the metadata survives to the backend, the compare order is as expected in IR,
and the backend does not do anything to reverse it.
We make the same change to the old pass manager to keep things synchronized.
Differential Revision: https://reviews.llvm.org/D100213
-filter-print-funcs -print-changed was crashing after the filter func
was removed by a pass with
Assertion failed: After.find("*** IR Dump") == 0 && "Unexpected banner format."
We weren't printing the banner because when we have -filter-print-funcs,
we print each function separately, letting the print function filter out
unwanted functions.
Reviewed By: jamieschmeiser
Differential Revision: https://reviews.llvm.org/D100237
SROA can handle invariant group intrinsics, let the inliner know that
for better heuristics when the intrinsics are present.
This fixes size issues in a couple files when turning on
-fstrict-vtable-pointers in Chrome.
Reviewed By: rnk, mtrofin
Differential Revision: https://reviews.llvm.org/D100249
This patch removes all uses of `std::iterator`, which was deprecated in C++17.
While this isn't currently an issue while compiling LLVM, it's useful for those using LLVM as a library.
For some reason there're a few places that were seemingly able to use `std` functions unqualified, which no longer works after this patch. I've updated those places, but I'm not really sure why it worked in the first place.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D67586
This patch adds more optimized codegen for the above SETCC forms,
by matching the '.vi' vector forms when the immediate is a 5-bit signed
immediate plus 1. The immediate can be decremented and the corresponding
SET[U]LE or SET[U]GT forms can be matched.
This work was left as a TODO from D94168.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100096
D24453 enabled libcalls simplication for ARM PCS. This may cause
caller/callee calling conventions mismatch in some situations such as
LTO. This patch makes instcombine aware that the compatible calling
conventions differences are benign (not emitting undef idom).
Differential Revision: https://reviews.llvm.org/D99773
If we run passes before lowering llvm.expect intrinsics to metadata,
then those passes have no way to act on the hints provided by llvm.expect.
SimplifyCFG is the known offender, and we made it smarter about profile
metadata in D98898.
In the motivating example from https://llvm.org/PR49336 , this means we
were ignoring the recommended method for a programmer to tell the compiler
that a compare+branch is expensive. This change appears to solve that case -
the metadata survives to the backend, the compare order is as expected in IR,
and the backend does not do anything to reverse it.
We make the same change to the old pass manager to keep things synchronized.
Differential Revision: https://reviews.llvm.org/D100213
Add a number of intrinsics which natively lower to MVE operations to the
lane interleaving pass, allowing it to efficiently interleave the lanes
of chucks of operations containing these intrinsics.
Differential Revision: https://reviews.llvm.org/D97293
Fixes the issues noted in PR48768, where the and/or/xor instruction had been promoted to avoid i8/i16 partial-dependencies, but the test against zero had not.
We can almost certainly relax this fold to work for any truncation, although it breaks a number of existing folds (notable movmsk folds which tend to rely on the truncate to determine the demanded bits/elts in the source vector).
There is a reverse combine in TargetLowering.SimplifySetCC so we must wait until after legalization before attempting this.
The previous code calculated the first ldtilecfg by dominating all AMX registers' def. This may result in the ldtilecfg being inserted into a loop.
This patch try to calculate the nearest point where all shapes of AMX registers are reachable.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D99010
FP16 to FP32 converts can be handled in MVE lane interleaving, much like
the sext/zext lowering we do. This expands the pass with fpext and
fptrunc handling, and basic fp operations allowing more efficient
lowering of fp vectors.
Differential Revision: https://reviews.llvm.org/D97292
The patch makes two updates to the arm-block-placement pass:
- Handle arbitrarily nested loops
- Extends the search (for t2WhileLoopStartLR) to the predecessor of the
preHeader.
Differential Revision: https://reviews.llvm.org/D99649
This reverts commit cca9b5985c.
Buildbot reported an error for CodeGen/AArch64/machine-combiner-fmul-dup.mir:
*** Bad machine code: Virtual register killed in block, but needed live out. ***
- function: indexed_2s
- basic block: %bb.0 entry (0x640fee8)
Virtual register %7 is used after the block.
*** Bad machine code: Virtual register defs don't dominate all uses. ***
- function: indexed_2s
- v. register: %7
LLVM ERROR: Found 2 machine code errors.
This patch adds DUP+FMUL => FMUL_indexed pattern to InstCombiner.
FMUL_indexed is normally selected during instruction selection, but it
does not work in cases when VDUP and VMUL are in different basic
blocks.
Differential Revision: https://reviews.llvm.org/D99662
Spilling the fp or bp to scratch could overwrite VGPRs of inactive
lanes. Fix that by using only the active lanes of the scavenged VGPR.
This builds on the assumptions that
1. a function is never called with exec=0
2. lanes do not die in a function, i.e. exec!=0 in the function epilog
3. no new lanes are active when exiting the function, i.e. exec in the
epilog is a subset of exec in the prolog.
Differential Revision: https://reviews.llvm.org/D96869
Spilling SGPRs to scratch uses a temporary VGPR. LLVM currently cannot
determine if a VGPR is used in other lanes or not, so we need to save
all lanes of the VGPR. We even need to save the VGPR if it is marked as
dead.
The generated code depends on two things:
- Can we scavenge an SGPR to save EXEC?
- And can we scavenge a VGPR?
If we can scavenge an SGPR, we
- save EXEC into the SGPR
- set the needed lane mask
- save the temporary VGPR
- write the spilled SGPR into VGPR lanes
- save the VGPR again to the target stack slot
- restore the VGPR
- restore EXEC
If we were not able to scavenge an SGPR, we do the same operations, but
everytime the temporary VGPR is written to memory, we
- write VGPR to memory
- flip exec (s_not exec, exec)
- write VGPR again (previously inactive lanes)
Surprisingly often, we are able to scavenge an SGPR, even though we are
at the brink of running out of SGPRs.
Scavenging a VGPR does not have a great effect (saves three instructions
if no SGPR was scavenged), but we need to know if the VGPR we use is
live before or not, otherwise the machine verifier complains.
Differential Revision: https://reviews.llvm.org/D96336
This patch adds the memory operands for indexed loads so
that certain optimizations can take place.
Differential Revision: https://reviews.llvm.org/D100215/
Change-Id: I539fcf046ca4ad1e7df1d893f57d751419d8364d
We saw some big compiling time impact after enabling the debug entry value
feature for X86 platform(D73534). Compiling time goes from 900s->1600s with
our testcase. It is caused by allocating/freeing the memory busily.
'using FwdRegWorklist = MapVector<unsigned, SmallVector<FwdRegParamInfo, 2>>;'
The value for this map is vector, and we miss the reference when access the
element. The same happens for `auto CalleesMap = MF->getCallSitesInfo();` which is a DenseMap.
Reviewed by: djtodoro, flychen50
Differential Revision: https://reviews.llvm.org/D100162
Say we have
%1=min(%a,%b)
%2=min(%b,%c)
%3=min(%2,%a)
The optimization will try to reassociate the later one so that we can rewrite it to %3=min(%1, %c) and remove %2.
But if %2 has another uses outside of %3 then we can't remove %2 and end up with:
%1=min(%a,%b)
%2=min(%b,%c)
%3=min(%1, %c)
This doesn't harm by itself except it is not profitable and changes IR for no good reason.
What is bad it triggers next iteration which finds out that optimization is applicable to %2 and %3 and generates:
%1=min(%a,%b)
%2=min(%b,%c)
%3=min(%1,%c)
%4=min(%2,%a)
and so on...
The solution is to prevent optimization in the first place if intermediate result (%2) has side uses and
known to be not removed.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D100170
XSCMPUQP is not available for pre-P9 subtargets. This patch will lower
them into libcall for correct behavior on power7/power8.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92083
First, we don't need vector-ness for the predecessor lists.
Secondly, like elsewhere, do insertions before deletions.
Lastly, the check that we actually need to insert an edge,
that it doesn't exist already, is backwards. Instead of
looking at successors of every single 'PredOfBB',
just always look at predecessors of the 'Succ'.
The result is always the same, but we avoid *really* inefficient code.
While, indeed, we may end up pushing less updates that we'd reserve space
for, self-dominating updates aren't often enough for that to matter.
But this should matter for normal updates.
Improve AVX512 mask inversion, rG38c799bce801 exposed some missing opportunities to move scalar not() back onto the boolvector types for folding with setcc etc.
In the final SIMD spec, there is only a single v128.any_true instruction, rather
than one for each lane interpretation because the semantics do not depend on the
lane interpretation.
Differential Revision: https://reviews.llvm.org/D100241
Followup to D100177, handle an similar (demorgan inverse style) case from PR47797 as well
The AVX512 test cases could be further improved if we folded not(iX bitcast(vXi1)) -> (iX bitcast(not(vXi1)))
Alive2: https://alive2.llvm.org/ce/z/AnA_-W
The first source has the same EEW as the destination and the other
source is a scalar so the overlap constraints don't apply to
the unmasked version.
For the masked version we have a constraint that the destination
can't be V0 so that covers the only overlap issue there.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D100217
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
This required reverting commit 9583a3f2625818b78c0cf6d473cdedb9f23ad82c:
"[AsmPrinter] Delete dead takeDeletedSymbsForFunction()".
This was not NFC as initially thought. By coalescing two function
psas managers, this exposed the reverted code as necessary.
addr-label.ll was crashing due to an emitted blockaddress's block being
removed but the label not emitted.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99707
Check the cache before calling isLoopSimplifyForm(). Otherwise we'd
always perform the check for the innermost loop and only skip it
for dominating loops.
This patch fixed the following issues along side with some refactoring:
1. Fix bugs where StringRef for context string out live the underlying std::string. We now keep string table in profile generator to hold std::strings. We also do the same for bracketed context strings in profile writer.
2. Make sure profile output strictly follow (total sample, name) order. Previously, there's inconsistency between ProfileMap's key and FunctionSamples's name, leading to inconsistent ordering. This is now fixed by introducing context profile canonicalization. Assertions are also added to make sure ProfileMap's key and FunctionSamples's name are always consistent.
3. Enhanced error handling for profile writing to make sure we bubble up errors properly for both llvm-profgen and llvm-profdata when string table is not populated correctly for extended binary profile.
4. Keep all internal context representation bracket free. This avoids creating new strings for context trimming, merging and preinline. getNameWithContext API is now simplied accordingly.
5. Factor out the code for context trimming and merging into SampleContextTrimmer in SampleProf.cpp. This enables llvm-profdata to use the trimmer when merging profiles. Changes in llvm-profgen will be in separate patch.
Differential Revision: https://reviews.llvm.org/D100090
The default is likely wrong.
Out of all the callees, only a single one needs to pass-in false (JumpThread),
everything else either already passes true, or should pass true.
Until the default is flipped, at least make it harder to unintentionally
add new callees with UseBlockValue=false.
"Does the predicate hold between two ranges?"
Not very surprisingly, some places were already doing this check,
without explicitly naming the algorithm, cleanup them all.
"Does the predicate hold between two ranges?"
Not very surprisingly, some places were already doing this check,
without explicitly naming the algorithm, cleanup them all.
Added cost estimation for switch instruction, updated costs of branches, fixed
phi cost.
Had to increase `-amdgpu-unroll-threshold-if` default value since conditional
branch cost (size) was corrected to higher value.
Test renamed to "control-flow.ll".
Removed redundant code in `X86TTIImpl::getCFInstrCost()` and
`PPCTTIImpl::getCFInstrCost()`.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D96805
Update llvm::sys::fs::mapped_file_region to have a move constructor and
a move assignment operator, allowing it to be used as an Optional. Also,
update FileOutputBuffer's OnDiskBuffer to take advantage of this,
avoiding an extra allocation from the unique_ptr.
A nice follow-up would be to make the mapped_file_region constructor
private and replace its use with a factory function, such as
mapped_file_region::create(), that returns an Expected (or ErrorOr). I
don't plan on doing that immediately, but I might swing back later.
No functionality change, besides the saved allocation in OnDiskBuffer.
Differential Revision: https://reviews.llvm.org/D100159
This adds support for swapping comparison operands when it may introduce new
folding opportunities.
This is roughly the same as the code added to AArch64ISelLowering in
162435e7b5.
For an example of a testcase which exercises this, see
llvm/test/CodeGen/AArch64/swap-compare-operands.ll
(Godbolt for that testcase: https://godbolt.org/z/43WEMb)
The idea behind this is that sometimes, we may be able to fold away, say, a
shift or extend in a compare by swapping its operands.
e.g. in the case of this compare:
```
lsl x8, x0, #1
cmp x8, x1
cset w0, lt
```
The following is equivalent:
```
cmp x1, x0, lsl #1
cset w0, gt
```
Most of the code here is just a reimplementation of what already exists in
AArch64ISelLowering.
(See `getCmpOperandFoldingProfit` and `getAArch64Cmp` for the equivalent code.)
Note that most of the AND code in the testcase doesn't actually fold. It seems
like we're missing selection support for that sort of fold right now, since SDAG
happily folds these away (e.g testSwapCmpWithShiftedZeroExtend8_32 in the
original .ll testcase)
Differential Revision: https://reviews.llvm.org/D89422
Remove the MachineDCE pass after the first SIFoldOperands pass now
that SIFoldOperands deletes its own dead instructions.
Differential Revision: https://reviews.llvm.org/D100189
When inserting a new def and renaming of uses is asked, always compute
IDF and do the renaming for the blocks with Phis in that IDF.
Resolves PR49859.
Differential Revision: https://reviews.llvm.org/D100163
Regiser types for xxsplti32dx for two td file patterns was incorrect.
Fixed the two types and added a test case that was reduced from a larger
failing test.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D100223
When lowering a BUILD_VECTOR SDNode, we choose among various possible vector
creation instructions in an attempt to minimize the total number of instructions
used. We previously considered using swizzles, consts, and splats, and this
patch adds shuffles as well. A common pattern that now lowers to shuffles is
when two 64-bit vectors are concatenated. Previously, concatenations generally
lowered to sequences of extract_lane and replace_lane instructions when they
could have been a single shuffle.
Differential Revision: https://reviews.llvm.org/D100018
I recently forgot a comma in a defm argument list and tablegen just
failed with exit code 1 without printing an error message. I believe
this issue was introduced in a9fc44c557.
This change prints the following instead:
.../clang/include/clang/Driver/Options.td:569:3: error: Expected comma before next argument
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D100178
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
This patch updates the linkage name in the DISubprogram of coro-split
functions, which is particularly important for Swift, where the
funclets have a special name mangling. This patch does not affect C++
coroutines, since the DW_AT_specification is expected to hold the
(original) linkage name. I believe this is mostly due to limitations
in AsmPrinter, so we might be able to relax this restriction in the
future.
Differential Revision: https://reviews.llvm.org/D99693
I've initially just enabled this for BMI which has the ANDN instruction for i32/i64 - the i16/i8 cases give an idea of what'd we get when we enable it in all cases (I'll do this as a later commit).
Additionally, the i16/i8 cases could be freely promoted to i32 (as the args are already zeroext) and we could then make use of ANDN + the free cmp0 there as well - this has come up in PR48768 and PR49028 so I'm going to look at this soon.
https://alive2.llvm.org/ce/z/QVWHP_https://alive2.llvm.org/ce/z/pLngT-
Vector cases do not appear to benefit from this as we end up with having to generate the zero vector as well - this is one of the reasons I didn't try to tie this into hasAndNot/hasAndNotCompare.
Differential Revision: https://reviews.llvm.org/D100177
As suggested in the review thread for 5094e12 and seen in the
motivating example from https://llvm.org/PR49885, it's not
clear if we have a way to create the optimal code without
this heuristic.
In LazyValueInfoImpl::isNonNullAtEndOfBlock we populate a set of
pointers, known to be non-null at the end of a block (e.g. because we
did a load through them). We then infer that any pointer, based on an
element of this set is non-null as well ("based" here meaning a
non-null pointer is the underlying object). This is incorrect, even if
the base pointer was non-null, the value of a GEP, that lacks the
inbounds` attribute, may be null.
This issue appeared as miscompilation of the following test case:
int puts(const char *);
typedef struct iter {
int *val;
} iter_t;
static long distance(iter_t first, iter_t last) {
long r = 0;
for (; first.val != last.val; first.val++)
++r;
return r;
}
int main() {
int arr[2] = {0};
iter_t i, j;
i.val = arr;
j.val = arr + 1;
if (distance(i, j) >= 2)
puts("failed");
else
puts("passed");
}
This fixes PR49662.
Differential Revision: https://reviews.llvm.org/D99642
This is cheap to implement, means less work for future passes like
MachineDCE, and slightly improves the folding in some cases.
Differential Revision: https://reviews.llvm.org/D100117
Use SIInstrFlags to differentiate between the different
variants of flat instructions (flat, global and scratch).
This should make it easier to bundle the immediate offset logic in a
single place and implement restrictions and bug workarounds.
Fixed version of D99587, which does not rely on the address space.
Differential Revision: https://reviews.llvm.org/D99743
Add an ability to store `Offset` between partially aliased location. Use this
storage within returned `ResultAlias` instead of caching it in `AAQueryInfo`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98718
Main reason is preparation to transform AliasResult to class that contains
offset for PartialAlias case.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98027
These cases were failing before, but with cryptic asserts.
Add asserts in the RegScavenger that fail earlier with better
messages. NFC
Differential Revision: https://reviews.llvm.org/D100109
New SDTypeProfile can be reused for other word operation patterns without explicit i64 type in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100097
Previously loading the vtable used in calling a virtual method in a loop
was not hoisted out of the loop. This fixes that.
canSinkOrHoistInst() itself doesn't check that the load operands are
loop invariant, callers also check that separately.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99784
meetBDVState looks pretty difficult to read and follow.
This is purely NFC but doing several things:
1) Combine meet and meetBDVState
2) Move the function to be a member of BDVState
3) Make BDVState be a mutable object
4) Convert switch to sequence of ifs
5) Adds comments.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D99064
Add explicit type i64 to RV64 only patterns to stop emitting unneeded i32 patterns.
It can reduce the isel table size.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100089
This reverts commit e35afbe535, reapplying
022ccedde8 and
e7ed5c920d.
- The first attempt missed defining `SignpostEmitterImpl`.
- The second attempt missed defining `llvm::SignpostEmitterImpl`.
Not sure how I failed to test both versions locally before; I thought
I'd turned the feature off via rerunning `cmake` but it must have been
stuck in place. This time I confirmed via `clang -E` that I was testing
both build configurations.
Original commit message:
Replace some manual memory management with std::unique_ptr.
Differential Revision: https://reviews.llvm.org/D100151
This reverts commit 078072285d, reapplying
022ccedde8.
I figured out why this was failing in other environments: it's not a
problem with std::unique_ptr, but that SignpostEmitterImpl only has a
forward declaration. Adding an empty definition should do the trick.
Original commit message:
Replace some manual memory management with std::unique_ptr.
Differential Revision: https://reviews.llvm.org/D100151
The destructor for SignPostEmitterImpl::SignpostLog is known statically. Avoid
the unnecessary vtable indirection through std::function in the std::unique_ptr
by turning LogDeleter into a struct. No real functionality change here.
Differential Revision: https://reviews.llvm.org/D100154
This is a DenseMap, which has its own initializer; we don't need to explicitly
call the default constructor here.
Differential Revision: https://reviews.llvm.org/D100152
Add a variant of `fs::resize_file` for use immediately before opening a
file with `mapped_file_region::readwrite`. On Windows, `_chsize`
(`ftruncate`) is slow, but `CreateFileMapping` (`mmap`) automatically
extends the file so the call to `fs::resize_file` can be skipped.
This optimization was added to `FileOutputBuffer` in
da9bc2e56d5a5c6332a9def1a0065eb399182b93; this commit just extracts the
logic out and adds a unit test.
Differential Revision: https://reviews.llvm.org/D95490
Instead of instantiating multiclasses inside multiclasses, just
inherit from them.
We can do the same for the VPseudo* multiclasses, but that may
interfere with the scheduler class work.
Pretty straightforward use of existing infrastructure and port of the attributor inference rules for nosync.
A couple points of interest:
* I deliberately switched from "monotonic or better" to "unordered or better". This is simply me being conservative and is better in line with the rest of the optimizer. We treat monotonic conservatively pretty much everywhere.
* The operand bundle test change is suspicious. It looks like we might have missed something here, but if so, it's an issue with the existing nofree inference as well. I'm going to take a closer look at that separately.
* I needed to keep the previous inference from readnone. This surprised me, but made sense once I realized readonly inference goes to lengths to reason about local vs non-local memory and that writes to local memory are okay. This is fine for the purpose of nosync, but would e.g. prevent us from inferring nofree from readnone - which is slightly surprising.
Differential Revision: https://reviews.llvm.org/D99769
This fixes a "Cached first special instruction is wrong!" assert.
The assert fires because replacing a value with another can cause an
instruction to no longer be "special" to ICF. In this case,
devirtualization happened, turning an indirect call to a
call to a willreturn function which is no longer special.
Reviewed By: nikic, rnk
Differential Revision: https://reviews.llvm.org/D99977
It used to work correctly even with a KILL, but there is
no reason to consider meta instructions since they do not
create real HW uses.
Differential Revision: https://reviews.llvm.org/D100135
After D99249 we use three different loop pass managers for LICM,
LoopRotate and LICM+LoopUnswitch. This happens because LazyBFI
and LazyBPI are not preserved by LoopRotate (note that D74640
is no longer needed). Avoid this by marking them as preserved.
My understanding of D86156 is that it is okay to simply preserve
them (which LoopUnswitch already does for the same reason) and
rely on callbacks to deal with deleted blocks.
Differential Revision: https://reviews.llvm.org/D99843
wasm64 was missing DAG ISEL patterns for external symbol based global.get, but simply adding these analogous to the existing 32-bit versions doesn't work.
This is because we are conflating the 32-bit global index with the pointer represented by the external symbol, which for wasm32 happened to work.
The simplest fix is to pretend we have a 64-bit global index. This sounds incorrect, but is immaterial since once this index is stored as a MachineOperand it becomes 64-bit anyway (and has been all along). As such, the EmitInstrWithCustomInserter based implementation I experimented with become a no-op and no further changes in the C++ code are required.
Differential Revision: https://reviews.llvm.org/D99904
After loop interchange, the (old) outer loop header should not jump to
the `LoopExit`. Note that the old outer loop becomes the new inner loop
after interchange. If we branched to `LoopExit` then after interchange
we would jump directly from the (new) inner loop header to `LoopExit`
without executing the rest of outer loop.
This patch modifies adjustLoopBranches() such that the old outer
loop header (which becomes the new inner loop header) jumps to the
old inner loop latch which becomes the new outer loop latch after
interchange.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D98475
Add InstAlias that allows the last operand to be an imm for following instructions:
1. Zbb or Zbp:
- ror
- rorw (RV64 Only)
2. Zbs
- best
- bclr
- binv
- bext
Reviewed By: craig.topper, jrtc27
Differential Revision: https://reviews.llvm.org/D100083
clang++ uses llvm.compiler.used in certain cases to preserve
symbol which is fully inlined. D96087 has resulted in undefined
symbols in such cases. Set it to false by default to preserve
old behavior but keep the option for specific uses where we
want to ignore these (e.g. to detect a potential indirect call
to a function).
Differential Revision: https://reviews.llvm.org/D99897
During SelectionDAG, we must track the SDNodes that each SDDbgValue depends on
to compute its value. These are ultimately derived from the location operands to
the SDDbgValue, but were stored in a separate vector prior to this patch. This
resulted in cases where one of the lists was updated incorrectly, resulting in
crashes during compilation. This patch fixes the issue by directly recomputing
the dependency list from the SDDbgOperands in getDependencies().
Differential Revision: https://reviews.llvm.org/D99423
Look through copies to find more cases where the two values being
selected are identical. The motivation for this is just to be able to
remove the weird special case where tryFoldCndMask was called from
foldInstOperand, part way through folding a move-immediate into its
users, without regressing any lit tests.
Instead of passing the start value and the defined value to
widenPHIInstruction, pass the VPWidenPHIRecipe directly, which can be
used to get both (and more in future patches).
This allows mapping larger files, delaying OOM failures until too many
pages of them are accessed. This is makes the behavior of the
mapped_file_region in this regard consistent between its "Unix" and
"Windows" implementations.
Guard the code witih #if defined(MAP_NORESERVE), consistent with other
uses of MAP_NORESERVE in llvm-project, because some FreeBSD versions do
not provide this flag.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D96626
ScratchExecCopy needs to be marked as live, we cannot use that register
while EXEC is stored in there.
Marking SGPRForFPSaveRestoreCopy and SGPRForBPSaveRestoreCopy as
available is unnecessary, they should not be live at that point anway.
Differential Revision: https://reviews.llvm.org/D100098
When attempting to truncate a FP vector and store the result out
to memory we crashed because we had no pattern for truncating FP
stores. In fact, we don't support these types of stores and the
correct fix is to stop marking these truncating stores as legal.
Tests have been added here:
CodeGen/AArch64/sve-fptrunc-store.ll
Differential Revision: https://reviews.llvm.org/D100025
During LoopStrengthReduce, some of the SSA values that are used by debug values
may be lost and/or salvaged. After LSR we attempt to recover any undef debug
values, including any that were salvaged but then lost their values afterwards,
by replacing the lost values with any live equal values (plus a possible
constant offset) that have been gathered prior to running LSR. When we do this
we restore the debug value's original DIExpression, to undo any salvaging (as we
have gone back to using the original debug value).
This process can currently produce invalid debug info if the number of operands
has changed by salvaging during LSR. Replacing old values during the
applyEqualValues step does not change the number of location operands, which
means that when we restore the old DIExpression we may have a mismatch between
the number of operands used by the debug value and the number of operands
referenced by the DIExpression. This patch fixes this by restoring the full
original location metadata at the start of the applyEqualValues step, so that
there is no mismatch in operand count between the debug value and its
DIExpression.
Differential Revision: https://reviews.llvm.org/D98644
Without the fix we get
../lib/Target/NVPTX/NVPTXLowerArgs.cpp:236:24: error: lambda capture 'Arg' is not used [-Werror,-Wunused-lambda-capture]
auto IsALoadChain = [Arg](Value *Start) {
^~~
1 error generated.
D99674 stopped the folding of certain select operations into and/or, due
to incorrect folding in the presence of poison. D97360 added some costs
to attempt to account for the change, but only worked at the getUserCost
level, not the getCmpSelInstrCost that the vectorizer will use directly.
This adds similar logic into the vectorizer to handle these logical
and/or selects, treating them like and/or directly.
This fixes 60% performance regressions from code like the attached test
case.
Differential Revision: https://reviews.llvm.org/D99884
This patch adds RVV codegen support for OR/XOR/AND reductions for both
scalable- and fixed-length vector types. There are a few possible
codegen strategies for each -- vmfirst.m, vmsbf.m, and vmsif.m could be
used to some extent -- but the vpopc.m instruction was chosen since it
produces the scalar result in one instruction, after which scalar
instructions can finish off the computation.
The reductions are lowered identically for both scalable- and
fixed-length vectors, although some alternate strategies may be more
optimal on fixed-length vectors since it's cheaper to get the length of
those types.
Other reduction types were not deemed to be relevant for mask vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100030
The GNU AS manual states the following about single-character constants enclosed within single quotes:
> Some backslash escapes apply to characters, \b, \f, \n, \r, \t, and \" with the same meaning as for strings, plus \' for a single quote.
Add two more characters to the switch handling this case to match GAS behaviour, plus a test to make sure nothing regresses.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99609
Combine all collected stats into separate struct RAGreedyStats
with add and report methods.
The motivation is to extend the number of statistics to capture and instead of
adding new parameters, just combine all of them into one structure.
Additionally I plan to use report from different places in future to report data
for function as well.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: thegameg
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100012
To save compile time, avoid computation of stats if ORE will not emit it.
The motivation is to add more stats and compute it only if it will dumped.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100010
Summary: Set the default DwarfInlinedStrings as inlined strings for DBX, due to DBX does not support .dwstr section for now.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99933
If the stack size is larger than 12 bits, we have to use a scratch
register to store the stack size. Before we introduce the scalable stack
offset, we could simplify
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%0 = ADD %fp, %scratch
However, if the offset contains scalable part, we need to consider it.
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%scratch = ADD %fp, %scratch
%scalable_offset = ... # sequence of instructions for vscaled-offset.
%0 = ADD/SUB %scratch, %scalable_offset
Differential Revision: https://reviews.llvm.org/D100035
This is a (late) follow-up patch of 8871a4b4ca and
c95f39891a to make ConstantStruct::get/ConstantArray::getImpl
correctly return PoisonValue if all elements are poison.
This was found while discussing about the elements of a vector-typed UndefValue (D99853)
Pseudo probes, when scattered in a block, can be chained dependencies of other regular DAG nodes and block DAG combine optimizations. To fix this, scattered probes in a block are grouped and placed at the beginning of the block. This shouldn't affect the profile quality.
Test Plan:
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D100002
New custom DAG nodes were added to represent operations on CSR. These
nodes are lowered to corresponding pseudo instruction. Using the pseudo
instructions allows to specify different scheduling information for
operations on different system registers. It also make possible to
specify dependencies of instructions on specific system registers.
Differential Revision: https://reviews.llvm.org/D98936
After loop interchange, the (old) outer loop header should not jump to
`LoopExit`. Note that the old outer loop becomes the new inner loop
after interchange. If we branched to `LoopExit` then after interchange
we would jump directly from the (new) inner loop header to `LoopExit`
without executing the rest of (new) outer loop.
This patch modifies adjustLoopBranches() such that the old outer
loop header (which becomes the new inner loop header) jumps to the
old inner loop latch which becomes the new outer loop latch after
interchange.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D98475
Allow pass to work separately with SGPR, VGPR registers or both.
This is NFC now but will be needed to split RA for separate
SGPR and VGPR passes.
Differential Revision: https://reviews.llvm.org/D100063
If the constants have a difference of 1 we can convert one to
the other by adding or subtracting the condition.
We have a DAG combine for this, but it only runs before type
legalization. If the select is introduced later during type
legalization or op legalization we will miss it.
We don't need a specific condition, but some conditions are
harder to materialize than others on RISCV. I know that SETLT
will be a single instruction and it is what is used by the
motivating pattern from signed saturating add/sub.
Differential Revision: https://reviews.llvm.org/D99021
When using the large code model with FastISel (for example via
clang -O0 which adds the optnone attribute), FP constants could
still be materialized using adrp + ldr. Unconditionally enable
the existing path for MachO to materialize the constant in code.
For testing, restore literal_pools_float.ll to exercise the constant
pool and add two optnone-functions that return a float and a double,
respectively. Consolidate fpimm.ll and add a new fast-isel-fpimm.ll
to check the code paths taken with FastISel.
Differential Revision: https://reviews.llvm.org/D99607
Philip Reames