MVT::i1 should be removed by type legalization before we reach
any code that would act on the promote action.
Mainly to avoid replicating this for strict FP versions of these
operations.
If we're using soft floats, then these operations shoudl be
softened during type legalization. They'll never get to
LegalizeVectorOps or LegalizeDAG so they don't need to be
Expanded there.
We had some code for this for 32-bit ARM, but this doesn't really need
to be in target-specific code; generalize it.
(I think this started showing up recently because we added an
optimization that converts pow to powi.)
Differential Revision: https://reviews.llvm.org/D69013
The MMX intrinsics for shift by immediate take a 32-bit shift
amount but the hardware for shifting by immediate only encodes
8-bits. For the intrinsic we don't require the shift amount to
fit in 8-bits in the frontend because we don't check that its an
immediate in the frontend. If its is not an immediate we move it
to an MMX register and use the shift by register.
But if it is an immediate we'll use the shift by immediate
instruction. But we need to change the shift amount to 8-bits.
We were previously doing this accidentally by masking it in the
encoder. But this can make a large shift amount into a small
in bounds shift amount. Instead we should clamp larger shift
amounts to 255 so that the they don't become in bounds.
Fixes PR43922
PVS Studio noticed that we were asserting "VT.getVectorNumElements() == VT.getVectorNumElements()" instead of "VT.getVectorNumElements() == InVT.getVectorNumElements()".
When writing an email for a follow up proposal, I realized one of the diffs in the committed change was incorrect. Digging into it revealed that the fix is complicated enough to require some thought, so reverting in the meantime.
The problem is visible in this diff (from the revert):
; X64-SSE-LABEL: store_fp128:
; X64-SSE: # %bb.0:
-; X64-SSE-NEXT: movaps %xmm0, (%rdi)
+; X64-SSE-NEXT: subq $24, %rsp
+; X64-SSE-NEXT: .cfi_def_cfa_offset 32
+; X64-SSE-NEXT: movaps %xmm0, (%rsp)
+; X64-SSE-NEXT: movq (%rsp), %rsi
+; X64-SSE-NEXT: movq {{[0-9]+}}(%rsp), %rdx
+; X64-SSE-NEXT: callq __sync_lock_test_and_set_16
+; X64-SSE-NEXT: addq $24, %rsp
+; X64-SSE-NEXT: .cfi_def_cfa_offset 8
; X64-SSE-NEXT: retq
store atomic fp128 %v, fp128* %fptr unordered, align 16
ret void
The problem here is three fold:
1) x86-64 doesn't guarantee atomicity of anything larger than 8 bytes. Some platforms observably break this guarantee, others don't, but the codegen isn't considering this, so it's wrong on at least some platforms.
2) When I started to track down the problem, I discovered that DAGCombiner had stripped the atomicity off the store entirely. This comes down to idiomatic usage of DAG.getStore passing all MMO components separately as opposed to just passing the MMO.
3) On x86 (not -64), there are cases where 8 byte atomiciy is supported, but only for floating point operations. This would seem to imply that operation typing matters for correctness, and DAGCombine happily folds away bitcasts. I'm not 100% sure there's a problem here, but I'm not entirely sure there isn't either.
I plan on returning to each issue in turn; sorry for the churn here.
If we don't demand all elements, then attempt to combine to a simpler shuffle.
At the moment we can only do this if Depth == 0 as combineX86ShufflesRecursively uses Depth to track whether the shuffle has really changed or not - we'll need to change this before we can properly start merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts (see D66004).
This reapplies rL368307 (reverted at rL369167) after the fix for the infinite loop reported at PR43024 was applied at rG3f087e38a2e7b87a5adaaac1c1b61e51220e7ff3
This stops infinite loops where KnownUndef elements are converted to Zeroable, resulting in KnownZero elements which are then simplified (via SimplifyDemandedElts etc.) back to KnownUndef elements........
Prep fix for PR43024 which will allow rL368307 to be re-applied.
This doesn't affect actual codegen, but is a minor refactor toward fixing PR43024 where we need to avoid excess changes (folding zeroables etc.) to the shuffle mask at Depth == 0.
Previously we marked zeroable elements in a way that prevented
the widening check from recognizing that it could widen. Now
we only mark them zeroable if V2 is an all zeros vector. This
matches what we do for widening elements in lowerVectorShuffle.
Fixes PR43866.
Teach combineVectorSizedSetCCEquality() to handle arbitrary memcmp
expansions but do not change any default policy for now.
This also fixes a bug in the memcmp expansion itself when large
displacements are needed.
https://reviews.llvm.org/D69507
Enable the new SelectionDAG representation for unordered loads and stores introduced in r371441 by default. As a reminder, the new lowering changes the representation of an unordered atomic load from an AtomicSDNode - which is essentially a black box which gets passed through without combines messing with it - to a LoadSDNode w/a atomic marker on the MMO. The later parallels the way we handle volatiles, and I've audited the code to ensure that every location which checks one checks the other.
This has been fairly heavily fuzzed, and I examined diffs in a reasonable large corpus of assembly by hand, so I'm reasonable sure this is correct for the common case. Late in the review for this, it was discovered that I hadn't correctly handled cases which could be legalized into CAS operations. This points out that there's a strong bias in the IR of the frontend I'm working with towards only legal atomics. If there are problems with this patch, the most likely area will be legalization.
Differential Revision: https://reviews.llvm.org/D69219
This catches some cases. There are probably ways to improve this.
I tried doing it as a combine on the setcc, but that broke
some cases involving flag reuse in place of test.
I renamed the isX86CCUnsigned to isX86CCSigned and flipped its
polarity to make it consistent with the similar functions for
ISD::SETCC. This avoids calling EQ/NE as being signed or unsigned.
Fixes PR43823.
Differential Revision: https://reviews.llvm.org/D69499
The legalization of v2i1->i2 or v4i1->i4 bitcasts followed by a setcc can create an and after the bitcast. If we're lucky enough that the input to the bitcast is a concat_vectors where the first operand is a setcc that can natively 0 all the upper bits of ak-register, then we should replace the other operands of the concat_vectors with zero in order to remove the AND.
With the AND removed we might be able to use a kortest on the result.
Differential Revision: https://reviews.llvm.org/D69205
PTEST and especially the MOVMSK instructions are slow on Knights Landing
or later. As a bonus, this patch increases instruction parallelism by
emitting:
KORTEST(PCMPNEQ(a, b), PCMPNEQ(c, d)) == 0
Instead of:
KORTEST(AND(PCMPEQ(a, b), PCMPEQ(c, d))) == ~0
https://reviews.llvm.org/D69157
tryToWidenViaDuplication lowers using the shuffle_v8i16(unpack_v16i8(shuffle_v8i16(x),shuffle_v8i16(x))) pattern, but the unpack only needs the even/odd 16i8 args if the original v16i8 shuffle mask references the even/odd elements - which isn't true for many extension style shuffles.
llvm-svn: 375342
We were always generating a single source HADDPD, but really we should only do this if shouldUseHorizontalOp says its a good idea.
Differential Revision: https://reviews.llvm.org/D69175
llvm-svn: 375341
Add generic DAG combine for extending masked loads.
Allow us to generate sext/zext masked loads which can access v4i8,
v8i8 and v4i16 memory to produce v4i32, v8i16 and v4i32 respectively.
Differential Revision: https://reviews.llvm.org/D68337
llvm-svn: 375085
Exposes an issue in getFauxShuffleMask where the OR(SHUFFLE,SHUFFLE) decode should always resolve zero/undef elements.
Part of the fix for PR43024 where ideally we shouldn't call resolveTargetShuffleAndZeroables for Depth == 0
llvm-svn: 374928
The only things VBROADCAST_LOAD uses is an address and a chain
node. It has no vector inputs.
So if its a user of the source of another broadcast that could
only mean one of two things. The other broadcast is broadcasting
the address of the broadcast_load. Or the source is a load and
the use we're seeing is the chain result from that load. Neither
of these cases make sense to combine here.
This issue was reported post-commit r373871. Test case has not
been reduced yet.
llvm-svn: 374862
This prevents isel from emitting a TEST instruction that
optimizeCompareInstr will need to remove later.
In some of the modified tests, the SUB gets duplicated due to
the flags being needed in two places and being clobbered in
between. optimizeCompareInstr was able to optimize away the TEST
that was using the result of one of them, but optimizeCompareInstr
doesn't know to turn SUB into CMP after removing the TEST. It
only knows how to turn SUB into CMP if the result was already
dead.
With this change the TEST never exists, so optimizeCompareInstr
doesn't have to remove it. Then it can just turn the SUB into
CMP immediately.
Fixes PR43649.
llvm-svn: 374755
We were already controlling whether the KnownZero elements were being written to the target mask, this extends it to the KnownUndef elements as well so we can prevent the target shuffle mask being manipulated at all.
llvm-svn: 374732
This enables use of the saturating truncate instructions when the
result type is less than 128 bits. It also enables the use of
saturating truncate instructions on KNL when the input is less
than 512 bits. We can do this by widening the input and then
extracting the result.
llvm-svn: 374731
This seems to improve std::midpoint code where we have a min and
a max with the same condition. If we split the setcc we can end
up with two compares if the one of the operands is a constant.
Since we aggressively canonicalize compares with constants.
For non-constants it can interfere with our ability to share
control flow if we need to expand cmovs into control flow.
I'm also not sure I understand this min/max canonicalization code.
The motivating case talks about comparing with 0. But we don't
check for 0 explicitly.
Removes one instruction from the codegen for PR43658.
llvm-svn: 374706
Since the input type is larger than 256-bits we'll need to some
concatenating to reassemble the results. The pack instructions
ability to concatenate while packing make this a shorter/faster
sequence.
llvm-svn: 374643
We already did this for VTRUNCUS with a specific combination of
types. This extends this to VTRUNCS and handles any types where
a truncating store is legal.
llvm-svn: 374615
If we don't have VLX we won't end up selecting a saturating
truncate for 256-bit or smaller vectors so we should just use
the pack lowering.
llvm-svn: 374487
When handling the packus pattern for i32->i8 we do a two step
process using a packss to i16 followed by a packus to i8. If the
final i8 step is a type with less than 64-bits the packus step
will return SDValue(), but the i32->i16 step might have succeeded.
This leaves the nodes from the middle step dangling.
Guard against this by pre-checking that the number of elements is
at least 8 before doing the middle step.
With that check in place this should mean the only other
case the middle step itself can fail is when SSE2 is disabled. So
add an early SSE2 check then just assert that neither the middle
or final step ever fail.
llvm-svn: 374460
If we've disable zmm registers, the v16i32 will need to be split. This split will propagate through min/max the truncate. This creates two sequences that need to be concatenated back to v16i8. We can instead use packusdw to do part of the clamping, truncating, and concatenating all at once. Then we can use a vpmovuswb to finish off the clamp.
Differential Revision: https://reviews.llvm.org/D68763
llvm-svn: 374431
As background, starting in D66309, I'm working on support unordered atomics analogous to volatile flags on normal LoadSDNode/StoreSDNodes for X86.
As part of that, I spent some time going through usages of LoadSDNode and StoreSDNode looking for cases where we might have missed a volatility check or need an atomic check. I couldn't find any cases that clearly miscompile - i.e. no test cases - but a couple of pieces in code loop suspicious though I can't figure out how to exercise them.
This patch adds defensive checks and asserts in the places my manual audit found. If anyone has any ideas on how to either a) disprove any of the checks, or b) hit the bug they might be fixing, I welcome suggestions.
Differential Revision: https://reviews.llvm.org/D68419
llvm-svn: 374261
Gather instructions can use i32 or i64 elements for indices. If
the index is zero extended from a type smaller than i32 to i64, we
can shrink the extend to just extend to i32.
llvm-svn: 373982
When the target option GuaranteedTailCallOpt is specified, calls with
the fastcc calling convention will be transformed into tail calls if
they are in tail position. This diff adds a new calling convention,
tailcc, currently supported only on X86, which behaves the same way as
fastcc, except that the GuaranteedTailCallOpt flag does not need to
enabled in order to enable tail call optimization.
Patch by Dwight Guth <dwight.guth@runtimeverification.com>!
Reviewed By: lebedev.ri, paquette, rnk
Differential Revision: https://reviews.llvm.org/D67855
llvm-svn: 373976
If a fp scalar is loaded and then used as both a scalar and a vector broadcast, perform the load as a broadcast and then extract the scalar for 'free' from the 0th element.
This involved switching the order of the X86ISD::BROADCAST combines so we only convert to X86ISD::BROADCAST_LOAD once all other canonicalizations have been attempted.
Adds a DAGCombinerInfo::recursivelyDeleteUnusedNodes wrapper.
Fixes PR43217
Differential Revision: https://reviews.llvm.org/D68544
llvm-svn: 373871
Replaces setTargetShuffleZeroElements with getTargetShuffleAndZeroables which reports the Zeroable elements but doesn't merge them into the decoded target shuffle mask (the merging has been moved up into getTargetShuffleInputs until we can get rid of it entirely).
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle mask isn't adjusted by its source inputs but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373867
Summary:
The default legalization for v16i64->v16i8 tries to create a multiple stage truncate concatenating after each stage and truncating again. But avx512 implements truncates with multiple uops. So it should be better to truncate all the way to the desired element size and then concatenate the pieces using unpckl instructions. This minimizes the number of 2 uop truncates. The unpcks are all single uop instructions.
I tried to handle this by just custom splitting the v16i64->v16i8 shuffle. And hoped that the DAG combiner would leave the two halves in the state needed to make D68374 do the job for each half. This worked for the first half, but the second half got messed up. So I've implemented custom handling for v8i64->v8i8 when v8i64 needs to be split to produce the VTRUNCs directly.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68428
llvm-svn: 373864
We can make use of the Zeroable mask to indicate which elements we can safely set to zero instead of creating a target shuffle mask on the fly.
This allows us to remove createTargetShuffleMask.
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle masks isn't adjusted by its source inputs in setTargetShuffleZeroElements but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373846
As discussed on PR42025, with more complex boolean math we can end up with many truncations/extensions of the comparison results through each bitop.
This patch handles the cases introduced in combineBitcastvxi1 by pushing the sign extension through the AND/OR/XOR ops so its just the original SETCC ops that gets extended.
Differential Revision: https://reviews.llvm.org/D68226
llvm-svn: 373834
Rename some variables to match lowerShuffleAsRepeatedMaskAndLanePermute - prep work toward adding some equivalent sublane functionality.
llvm-svn: 373832
We already do this for ISD::TRUNCATE, but we can do the same for X86ISD::VTRUNC
Differential Revision: https://reviews.llvm.org/D68432
llvm-svn: 373765
This patch recognizes the shuffle pattern we get from a
v8i64->v8i8 truncate when v8i64 isn't a legal type.
With VLX we can use two VTRUNCs, unpckldq, and a insert_subvector.
Diffrential Revision: https://reviews.llvm.org/D68374
llvm-svn: 373645
We can make use of the Zeroable mask to indicate which elements we can safely set to zero instead of creating a target shuffle mask on the fly.
This only leaves one user of createTargetShuffleMask which we can hopefully get rid of in a similar manner.
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle masks isn't adjusted by its source inputs in setTargetShuffleZeroElements but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373641
This improves broadcast load folding of i64 elements on 32-bit
targets where i64 isn't legal.
Previously we had to represent these as vXf64 vbroadcast_loads and
a bitcast to vXi64. But we didn't have any isel patterns
looking for that.
This also allows us to remove or simplify some isel patterns that
were looking for bitcasted vbroadcast_loads.
llvm-svn: 373566
The previous code tried to do a trick where we would extract the subvector from the location we were inserting. Then xor that with the new value. Take the xored value and clear out the bits above the subvector size. Then shift that xored subvector to the insert location. And finally xor that with the original vector. Since the old subvector was used in both xors, this would leave just the new subvector at the inserted location. Since the surrounding bits had been zeroed no other bits of the original vector would be modified.
Unfortunately, if the old subvector came from undef we might aggressively propagate the undef. Then we end up with the XORs not cancelling because they aren't using the same value for the two uses of the old subvector. @bkramer gave me a case that demonstrated this, but we haven't reduced it enough to make it easily readable to see what's happening.
This patch uses a safer, but more costly approach. It isolate the bits above the insertion and bits below the insert point and ORs those together leaving 0 for the insertion location. Then widens the subvector with 0s in the upper bits, shifts it into position with 0s in the lower bits. Then we do another OR.
Differential Revision: https://reviews.llvm.org/D68311
llvm-svn: 373495
The gather/scatter instructions can implicitly sign extend the indices. If we're operating on 32-bit data, an v16i64 index can force a v16i32 gather to be split in two since the index needs 2 registers. If we can shrink the index to the i32 we can avoid the split. It should always be safe to shrink the index regardless of the number of elements. We have gather/scatter instructions that can use v2i32 index stored in a v4i32 register with v2i64 data size.
I've limited this to before legalize types to avoid creating a v2i32 after type legalization. We could check for it, but we'd also need testing. I'm also only handling build_vectors with no bitcasts to be sure the truncate will constant fold.
Differential Revision: https://reviews.llvm.org/D68247
llvm-svn: 373408
Summary:
This adds the ISD opcode and a DAG combine to create it. There are
probably some places where we can directly create it, but I'll
leave that for future work.
This updates all of the isel patterns to look for this new node.
I had to add a few additional isel patterns for aligned extloads
which we should probably fix with a DAG combine or something. This
does mean that the broadcast load folding for avx512 can no
longer match a broadcasted aligned extload.
There's still some work to do here for combining a broadcast of
a broadcast_load. We also need to improve extractelement or
demanded vector elements of a broadcast_load. I'll try to get
those done before I submit this patch.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68198
llvm-svn: 373349
Replace with the MachineFunction. X86 is the only user, and only uses
it for the function. This removes one obstacle from using this in
GlobalISel. The other is the more tolerable EVT argument.
The X86 use of the function seems questionable to me. It checks hasFP,
before frame lowering.
llvm-svn: 373292
The i1 scalar would have been type legalized to i8, but that
doesn't guarantee anything about the upper bits. If we're going
to use it as condition we need to make sure the upper bits are 0.
I've special cased ISD::SETCC conditions since that should
guarantee zero upper bits. We could go further and use
computeKnownBits, but we have no tests that would need that.
Fixes PR43507.
llvm-svn: 373246
ANY_EXTEND of v8i8 is marked Custom on AVX512 for handling extends
from v8i8. But the type legalization infrastructure will call
ReplaceNodeResults for v8i8 results. We should just defer it the
default handling instead of asserting in the default of the switch.
Fixes PR43509.
llvm-svn: 373234
This was added back to allow some performance regressions to be
investigated. The main perf issue was fixed shortly after adding
this back and no other major issues have been reported. So I
think its safe to remove this again.
llvm-svn: 373174
Creating new nodes is what we usually do. Have to explicitly
check that we don't update to an existing node and having
to manually manage the worklist is unusual.
We can probably add a helper function to reduce the duplication
of having to check if we should create a gather or scatter, but
I wanted to just get the simple thing done.
llvm-svn: 373137
The majority of the code doesn't run on the X86 nodes today since
its gated by isBeforeLegalizeOps and we don't formm X86 nodes
until after that. Except for a couple special case in type
legalization. But I think we would probably break those if
some of the transforms fire on them.
I want to remove the hardcoded operand numbers and the unusual
use of UpdateNodeOperands. Being able to know which ISD opcodes
are present should help with that.
llvm-svn: 373136
This removes the need for ConvertToTarget opcodes in the isel table.
It's also consistent with the recent changes to use TargetConstant
for intrinsic nodes that always take immediates.
Differential Revision: https://reviews.llvm.org/D67902
llvm-svn: 372645
The attached test case would previous infinite loop after
r365711.
I'm going to move this to X86ISelDAGToDAG.cpp to get the setcc
to match VPTEST in 32-bit mode in a follow up commit.
llvm-svn: 372543
This allows us to use timm in the isel table which is more
consistent with other intrinsics that take an immediate now.
We can't declare the intrinsic as taking an ImmArg because we
need to match non-constants to the shift by MMX register
instruction which we do by mutating the intrinsic id during
lowering.
llvm-svn: 372537
This intrinsics should be shift by immediate, but gcc allows any
i32 scalar and clang needs to match that. So we try to detect the
non-constant case and move the data from an integer register to an
MMX register.
Previously this was done by creating a v2i32 build_vector and
bitcast in SelectionDAGBuilder. This had to be done early since
v2i32 isn't a legal type. The bitcast+build_vector would be DAG
combined to X86ISD::MMX_MOVW2D which isel will turn into a
GPR->MMX MOVD.
This commit just moves the whole thing to lowering and emits
the X86ISD::MMX_MOVW2D directly to avoid the illegal type. The
test changes just seem to be due to nodes being linearized in a
different order.
llvm-svn: 372535
This reverts commit 52621307bc.
Tests have been failing all night with
[0/2] ACTION //llvm/test:check-llvm(//llvm/utils/gn/build/toolchain:unix)
-- Testing: 33647 tests, 64 threads --
Testing: 0 .. 10..
UNRESOLVED: LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll (6943 of 33647)
******************** TEST 'LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll' FAILED ********************
Test has no run line!
********************
Since there were other concerns on https://reviews.llvm.org/D67785,
I'm just reverting for now.
llvm-svn: 372383
We reuse an ISD opcode here that can be reached from BMI that
doesn't require it to be an immediate. Our isel patterns to match
the TBM immediate form require a Constant and not a TargetConstant.
We were accidentally getting the Constant due to a quirk of
combineBEXTR calling SimplifyDemandedBits. The call to
SimplifyDemandedBits ended up constant folding the TargetConstant
to a regular Constant. But we should probably instead be asserting
if SimplifyDemandedBits on a TargetConstant so we shouldn't rely
on this behavior.
llvm-svn: 372373
Summary: This fixes a crasher introduced by r372338.
Reviewers: echristo, arsenm
Subscribers: jvesely, wdng, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67785
Tighten up the test case.
llvm-svn: 372366
The later code that generates a constant when there are
some non-const elements works basically the same and doesn't
require there to be any non-const elements.
llvm-svn: 372365
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This patch converts the DAGCombine isNegatibleForFree/GetNegatedExpression into overridable TLI hooks and includes a demonstration X86 implementation.
The intention is to let us extend existing FNEG combines to work more generally with negatible float ops, allowing it work with target specific combines and opcodes (e.g. X86's FMA variants).
Unlike the SimplifyDemandedBits, we can't just handle target nodes through a Target callback, we need to do this as an override to allow targets to handle generic opcodes as well. This does mean that the target implementations has to duplicate some checks (recursion depth etc.).
I've only begun to replace X86's FNEG handling here, handling FMADDSUB/FMSUBADD negation and some low impact codegen changes (some FMA negatation propagation). We can build on this in future patches.
Differential Revision: https://reviews.llvm.org/D67557
llvm-svn: 372333
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
This generates worse code, but matches what is done for avx2 and
prevents crashes when more arguments are passed than we have
registers for.
llvm-svn: 372200
The case were Immediate is 0 and HasConstElts is true should never
happen since that would mean the constant elts were all zero. But
we check for all zero build vector earlier. So just use HasConstElts
and blindly take Immediate without checking if its 0.
Move the code that bitcasts and extract the immediate into the
the HasConstElts case since the other code just creates an undef
with the right type. No casting needed.
llvm-svn: 372153
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Previously we tried to split them into narrower v64i1 or v16i1
pieces that each got promoted to vXi8 and then passed in a zmm
or xmm register. But this crashes when you need to pass more
pieces than available registers reserved for argument passing.
The scalarizing done here generates much longer and slower code,
but is consistent with the behavior of avx2 and earlier targets
for these types.
Fixes PR43323.
llvm-svn: 372069
Some prep work for PR42863, this change allows us to move all the FMA opcode mappings into the negateFMAOpcode helper.
For the FMADDSUB/FMSUBADD cases, we can only negate the accumulator - any other negations will result in an error.
llvm-svn: 371840
The X86 decision assumes the compare will produce a result in an XMM
register, but that can't happen for an fp128 compare since those
go to a libcall the returns an i32. Pass the VT so X86 can check
the type.
llvm-svn: 371775
I found three issues:
1. the loop over E[ABCD]X copies run over BB start
2. the direct address of cmpxchg8b could be a frame index
3. the displacement of cmpxchg8b could be a global instead of an
immediate
These were all introduced together in r287875, and should be fixed with
this change.
Issue reported by Zachary Turner.
llvm-svn: 371678
fp128 is considered a legal type for a register, but has almost no legal operations so everything needs to be converted to a libcall. Previously this was implemented by tricking type legalization into softening the operations with various checks for "is legal in hardware register" to change the behavior to still use f128 as the resulting type instead of converting to i128.
This patch abandons this approach and instead moves the libcall conversions to LegalizeDAG. This is the approach taken by AArch64 where they also have a legal fp128 type, but no legal operations. I think this is more in spirit with how SelectionDAG's phases are supposed to work.
I had to make some hacks for STRICT_FP_ROUND because some of the strict FP handling checks if ISD::FP_ROUND is Legal for a given result type, but I had to make ISD::FP_ROUND Custom to allow making a libcall when the input is f128. For all other types the Custom handler just returns the original node. These hacks are incomplete and don't work for a strict truncate from f128, but I don't think it worked before either since LegalizeFloatTypes doesn't know about strict ops yet. I've also raised PR43209 against AArch64 which currently crashes on a strict ftrunc from f64->f32 because of FP_ROUND being marked Custom for the same reason there.
Differential Revision: https://reviews.llvm.org/D67128
llvm-svn: 371672
See D66309 for context.
This is the first sweep of x86 target specific code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time.
Sorry for the lack of tests. As discussed in the review, most of these are vector tests (for which atomicity is not well defined) and I couldn't figure out to exercise the anyextend cases which aren't vector specific.
Differential Revision: https://reviews.llvm.org/D66322
llvm-svn: 371547
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
Current for SAE instructions we only allow _MM_FROUND_CUR_DIRECTION(bit 2) or _MM_FROUND_NO_EXC(bit 3) to be used as the immediate passed to the inrinsics. But these instructions don't perform rounding so _MM_FROUND_CUR_DIRECTION is just sort of a default placeholder when you don't want to suppress exceptions. Using _MM_FROUND_NO_EXC by itself is really bit equivalent to (_MM_FROUND_NO_EXC | _MM_FROUND_TO_NEAREST_INT) since _MM_FROUND_TO_NEAREST_INT is 0. Since we aren't rounding on these instructions we should also accept (_MM_FROUND_CUR_DIRECTION | _MM_FROUND_NO_EXC) as equivalent to (_MM_FROUND_NO_EXC). icc allows this, but gcc does not.
Differential Revision: https://reviews.llvm.org/D67289
llvm-svn: 371430
This patch decodes target and faux shuffles with getTargetShuffleInputs - a reduced version of resolveTargetShuffleInputs that doesn't resolve SM_SentinelZero cases, so we can correctly remove zero vectors if they aren't demanded.
llvm-svn: 371353
If the two zero vectors have undefs in different places they
won't get combined by simplifySelect.
This fixes a regression from an earlier commit.
llvm-svn: 371351
The change to avx512-vec-cmp.ll is a regression, but should be
easy to fix. It occurs because the getZeroVector call was
canonicalizing both sides to the same node, then SimplifySelect
was able to simplify it. But since only called getZeroVector
on some VTs this isn't a robust way to combine this.
The change to vector-shuffle-combining-ssse3.ll is more
instructions, but removes a constant pool load so its unclear
if its a regression or not.
llvm-svn: 371350
This generalizes the existing <32 x i1> pre-AVX2 split code to support reductions from <64 x i1> as well, we can probably generalize to any larger pow2 case in the future if the (unlikely) need ever arises.
We still need to tweak combineBitcastvxi1 to improve AVX512F codegen as its assumes vXi1 types should be handled on the mask registers even when they aren't legal.
Differential Revision: https://reviews.llvm.org/D67070
llvm-svn: 371328
isel used to require zero vectors to be canonicalized to a single
type to minimize the number of patterns needed to match. This is
no longer required.
I plan to do this to integers too, but floating point was simpler
to start with. Integer has a complication where v32i16/v64i8 aren't
legal when the other 512-bit integer types are.
llvm-svn: 371325
Use getAPIntValue() directly - this is mainly a best practice style issue to help prevent fuzz tests blowing up when a i12345 (or whatever) is generated.
Use getConstantOperandVal/getConstantOperandAPInt wrappers where possible.
llvm-svn: 371315
Fix for https://bugs.llvm.org/show_bug.cgi?id=43230.
When creating PSHUFLW from a repeated shuffle mask, we have to apply
the checks to the repeated mask, not the original one. For the test
case from PR43230 the inspected part of the original mask is all undef.
Differential Revision: https://reviews.llvm.org/D67314
llvm-svn: 371307
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: nemanjai, javed.absar, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67267
llvm-svn: 371212
As noted in PR43197, we can use test+add+cmov+sra to implement
signed division by a power of 2.
This is based off the similar version in AArch64, but I've
adjusted it to use target independent nodes where AArch64 uses
target specific CMP and CSEL nodes. I've also blocked INT_MIN
as the transform isn't valid for that.
I've limited this to i32 and i64 on 64-bit targets for now and only
when CMOV is supported. i8 and i16 need further investigation to be
sure they get promoted to i32 well.
I adjusted a few tests to enable cmov to demonstrate the new
codegen. I also changed twoaddr-coalesce-3.ll to 32-bit mode
without cmov to avoid perturbing the scenario that is being
set up there.
Differential Revision: https://reviews.llvm.org/D67087
llvm-svn: 371104
As discussed on D64551 and PR43227, we don't correctly handle cases where the base load has a non-zero byte offset.
Until we can properly handle this, we must bail from EltsFromConsecutiveLoads.
llvm-svn: 371078
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
This reverts r370525 (git commit 0bb1630685)
Also reverts r370543 (git commit 185ddc08ee)
The approach I took only works for functions marked `noreturn`. In
general, a call that is not known to be noreturn may be followed by
unreachable for other reasons. For example, there could be multiple call
sites to a function that throws sometimes, and at some call sites, it is
known to always throw, so it is followed by unreachable. We need to
insert an `int3` in these cases to pacify the Windows unwinder.
I think this probably deserves its own standalone, Win64-only fixup pass
that runs after block placement. Implementing that will take some time,
so let's revert to TrapUnreachable in the mean time.
llvm-svn: 370829
This merges the 32-bit and 64-bit mode code to just use Custom
for both i32 and i64. We already had most of the handling in
the custom handling due to the AVX512 having legal fp_to_uint.
Just needed to add the i32->i64 promotion handling. Refactor
the fp_to_uint code in the custom handler to simplify the
number of times we check things.
Tweak cost model tables to match the default handling we were
getting due to Expand before.
llvm-svn: 370700
Use Custom lowering instead. Fall back to default expansion only
when the scalar FP type belongs in an XMM register. This improves
lowering for i32 to fp80, and also i32 to double on SSE1 only.
llvm-svn: 370699
FP128 values are passed in xmm registers so should be asssociated
with an SSE feature rather than MMX which uses a different set
of registers.
llc enables sse1 and sse2 by default with x86_64. But does not
enable mmx. Clang enables all 3 features by default.
I've tried to add command lines to test with -sse
where possible, but any test that returns a value in an xmm
register fails with a fatal error with -sse since we have no
defined ABI for that scenario.
llvm-svn: 370682
Rename to lowerShuffleAsLanePermuteAndShuffle to make it clear that not just blends are performed.
Cleanup the in-lane shuffle mask generation to make it more obvious what's going on.
Some prep work noticed while investigating the poor shuffle code mentioned in D66004.
llvm-svn: 370613
EltsFromConsecutiveLoads was assuming that the number of input elts was the same as the number of elements in the output vector type when creating a zeroing shuffle, causing an assert when subvectors were being combined instead of just scalars.
llvm-svn: 370592
Users have complained llvm.trap produce two ud2 instructions on Win64,
one for the trap, and one for unreachable. This change fixes that.
TrapUnreachable was added and enabled for Win64 in r206684 (April 2014)
to avoid poorly understood issues with the Windows unwinder.
There seem to be two major things in play:
- the unwinder
- C++ EH, _CxxFrameHandler3 & co
The unwinder disassembles forward from the return address to scan for
epilogues. Inserting a ud2 had the effect of stopping the unwinder, and
ensuring that it ran the EH personality function for the current frame.
However, it's not clear what the unwinder does when the return address
happens to be the last address of one function and the first address of
the next function.
The Visual C++ EH personality, _CxxFrameHandler3, needs to figure out
what the current EH state number is. It does this by consulting the
ip2state table, which maps from PC to state number. This seems to go
wrong when the return address is the last PC of the function or catch
funclet.
I'm not sure precisely which system is involved here, but in order to
address these real or hypothetical problems, I believe it is enough to
insert int3 after a call site if it would otherwise be the last
instruction in a function or funclet. I was able to reproduce some
similar problems locally by arranging for a noreturn call to appear at
the end of a catch block immediately before an unrelated function, and I
confirmed that the problems go away when an extra trailing int3
instruction is added.
MSVC inserts int3 after every noreturn function call, but I believe it's
only necessary to do it if the call would be the last instruction. This
change inserts a pseudo instruction that expands to int3 if it is in the
last basic block of a function or funclet. I did what I could to run the
Microsoft compiler EH tests, and the ones I was able to run showed no
behavior difference before or after this change.
Differential Revision: https://reviews.llvm.org/D66980
llvm-svn: 370525
gcc and icc pass these types in zmm registers in zmm registers.
This patch implements a quick hack to override the register
type before calling convention handling to one that is legal.
Longer term we might want to do something similar to 256-bit
integer registers on AVX1 where we just split all the operations.
Fixes PR42957
Differential Revision: https://reviews.llvm.org/D66708
llvm-svn: 370495
ISD::isBuildVectorAllZeros permits undef elements to be present, which means we can't return it as a zero vector. PMULDQ/PMULUDQ is an extending multiply so a multiply by zero of the lower 32-bits should result in a zero 64-bit element.
llvm-svn: 370404
Summary:
We were previously doing it in DAGCombine.
But we also want to do `sub %x, C` -> `add %x, (sub 0, C)` for vectors in DAGCombine.
So if we had `sub %x, -1`, we'll transform it to `add %x, 1`,
which `combineIncDecVector()` will immediately transform back into `sub %x, -1`,
and here we go again...
I've marked this as NFC since not a single test changes,
but since that 'changes' DAGCombine, probably this isn't fully NFC.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62327
llvm-svn: 370327
We had an isel pattern to perform this, but its better to
do it in DAG combine as a simplification. This also fixes the lack
of patterns for AVX512 targets.
llvm-svn: 370294
Including a type legalizer fix to make bitcast operand promotion
work correctly when getSoftenedFloat returns f128 instead of i128.
Fixes PR43157
llvm-svn: 370293
Neither libgcc or compiler-rt are usually used on Windows, so these
functions can't be called.
Differential revision: https://reviews.llvm.org/D66880
llvm-svn: 370204
Probably better to keep add over sub in early DAG combines.
It might make sense to push this to lowering or delay it all
the way to isel. But this was the simplest change.
llvm-svn: 369981
ANY_EXTEND_VECTOR_INREG isn't currently marked Legal which prevents SimplifyDemandedBits from turning SIGN/ZERO_EXTEND_VECTOR_INREG into it after op legalization. And even if we did make it Legal, combineExtInVec doesn't do shuffle combining on the VECTOR_INREG nodes until AVX1.
This patch adds a quick hack to combinePMULDQ to directly emit a vector shuffle corresponding to an ANY_EXTEND_VECTOR_INREG operation. This avoids both of those issues without creating any other regressions on our tests. The xop-ifma.ll change here also showed up when I tried to resurrect D56306 and seemed to be the only improvement that patch creates now. This is a more direct way to get the benefit.
Differential Revision: https://reviews.llvm.org/D66436
llvm-svn: 369942
Summary:
Concat_vectors is more canonical during early DAG combine. For example, its what's used by SelectionDAGBuilder when converting IR shuffles into SelectionDAG shuffles when element counts between inputs and mask don't match. We also have combines in DAGCombiner than can pull concat_vectors through a shuffle. See partitionShuffleOfConcats. So it seems like concat_vectors is a better operation to use here. I had to teach DAGCombiner's SimplifyVBinOp to also handle concat_vectors with undef. I haven't checked yet if we can remove the INSERT_SUBVECTOR version in there or not.
I didn't want to mess with the other caller of getShuffleHalfVectors that's used during shuffle lowering where insert_subvector probably is what we want to produce so I've enabled this via a boolean passed to the function.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66504
llvm-svn: 369872
CONCAT_VECTORS and INSERT_SUBVECTORS can both call combineConcatVectorOps,
but we shouldn't produce INSERT_SUBVECTORS from there. We should
keep CONCAT_VECTORS until vector legalization.
Noticed while looking at the madd_quad_reduction test from madd.ll
llvm-svn: 369802
Patch showing the effect of enabling bool vector oversimplification.
Non-VLX builds can simplify a kshift shuffle, but VLX builds simplify:
insert_subvector v8i zeroinitializer, v2i --> insert_subvector v8i undef, v2i
Preventing the removal of the AND to clear the upper bits of result
Differential Revision: https://reviews.llvm.org/D53022
llvm-svn: 369780
For v2i32 we only feed 2 i8 elements into the psadbw instructions
with 0s in the other 14 bytes. The resulting psadbw instruction
will produce zeros in bits [127:16] of the output. We need to take
the result and feed it to a v2i32 add where the first element
includes bits [15:0] of the sad result. The other element should
be zero.
Prior to this patch we were using a truncate to take 0 from
bits 95:64 of the psadbw. This results in a pshufd to move those
bits to 63:32. But since we also have zeroes in bits 63:32 of
the psadbw output, we should just take those bits.
The previous code probably worked better with promoting legalization,
but now we use widening legalization. I've preserved the old
behavior if -x86-experimental-vector-widening-legalization=false
until we get that option removed.
llvm-svn: 369733
I also had to add a new combine to X86's combineExtractSubvector to prevent a regression.
This helps our vXi1 code see the full concat operation and allow it optimize undef to a zero if there is already a zero in the concat. This helped us use a movzx instead of an AND in some of the tests. In those tests, one concat comes from SelectionDAGBuilder and the second comes from type legalization of v4i1->i4 bitcasts which uses an additional concat. Though these changes weren't my original motivation.
I'm looking at making X86ISelLowering's narrowShuffle emit a concat_vectors instead of an insert_subvector since concat_vectors is more canonical during early DAG combine. This patch helps prevent a regression from my experiments with that.
Differential Revision: https://reviews.llvm.org/D66456
llvm-svn: 369459
Without AVX512DQ we don't have KMOVB so we can't really copy 8-bits of a k-register to a GPR. We have to copy 16 bits instead. We do this even if the DAG copy is from v8i1->v16i1. If we detect the (i8 (bitcast (v8i1 (extract_subvector (v16i1 X), 0)))) we should rewrite the types to match the copy we do support. By doing this, we can help known bits to propagate without losing the upper 8 bits of the input to the extract_subvector. This allows some zero extends to be removed since we have an isel pattern to use kmovw for (zero_extend (i16 (bitcast (v16i1 X))).
Differential Revision: https://reviews.llvm.org/D66489
llvm-svn: 369434
Google is reporting performance issues with the new default behavior
and have asked for a way to switch back to the old behavior while we
investigate and make fixes.
I've restored all of the code that had since been removed and added
additional checks of the command flag onto code paths that are
not otherwise guarded by a check of getTypeAction.
I've also modified the cost model tables to hopefully get us back
to the previous costs.
Hopefully we won't need to support this for very long since we
have no test coverage of the old behavior so we can very easily
break it.
llvm-svn: 369332
The motivating case are the changes in vector-reduce-add.ll where
we were doing extra work in the scalar domain instead of shuffling.
There may be some one use check that needs to be looked into there,
but this patch sidesteps the issue by avoiding broadcasts that
aren't really broadcasting.
Differential Revision: https://reviews.llvm.org/D66071
llvm-svn: 369287
We can support these by widening to a supported type,
then shifting all the way to the left and then
back to the right to ensure that we shift in zeroes.
llvm-svn: 369232
Not sure how to test this as we have tests that exercise this code,
but nothing failed for the types not matching. Since all the k-registers
use equivalent register classes everything just ends up working.
llvm-svn: 369228
This allows us to widen the type when the KSHIFTR instruction
doesn't exist for the type. If we need to shift in zeroes into
the upper elements we would need more work to guarantee zeroes
when widening.
llvm-svn: 369227
For such a case we should only need a KSHIFTL, but we were
previously generating a KSHIFTL followed by a KSHIFTR because
we mistakenly believed we need to zero the undef elements.
llvm-svn: 369224
Add similar functionality to isShuffleEquivalent - if the mask elements don't match, try matching the BUILD_VECTOR scalars instead.
As target shuffles need to handle SM_Sentinel values, this can get a bit tricky, so commit just adds actual mask element index handling - full SM_SentinelZero support will be added when the need arises.
Also, enables support in matchVectorShuffleWithPACK
llvm-svn: 369212
Simplifies shuffle mask comparisons by just bailing out if the shuffle mask has any out of range values - will make an upcoming patch much simpler.
llvm-svn: 369211
Eventually we need to generalize combineExtractWithShuffle to handle all faux shuffles and handle truncate (and X86ISD::VTRUNC etc.) there, but we're not ready yet (still creates nodes on the fly, incomplete DemandedElts support, bad use of recursive Depth limit).
llvm-svn: 369134
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
If the last step in an FP add reduction allows reassociation and doesn't care
about -0.0, then we are free to recognize that computation as a reduction
that may reorder the intermediate steps.
This is requested directly by PR42705:
https://bugs.llvm.org/show_bug.cgi?id=42705
and solves PR42947 (if horizontal math instructions are actually faster than
the alternative):
https://bugs.llvm.org/show_bug.cgi?id=42947
Differential Revision: https://reviews.llvm.org/D66236
llvm-svn: 368995
If the width is 256 bits, then we must have AVX so the else here
was unnecessary. Once that's removed then the >= 256 bit code is
identical to the 128 bit code with a different VT so combine them.
llvm-svn: 368956
If the target shuffle mask is from a wider type, attempt to scale the mask so that the extraction can attempt to peek through.
Fixes the regression mentioned in rL368662
Reapplying this as rL368308 had to be reverted as part of rL368660 to revert rL368276
llvm-svn: 368663
If we don't demand all elements, then attempt to combine to a simpler shuffle.
At the moment we can only do this if Depth == 0 as combineX86ShufflesRecursively uses Depth to track whether the shuffle has really changed or not - we'll need to change this before we can properly start merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts.
The insertps-combine.ll regression is because XFormVExtractWithShuffleIntoLoad can't see through shuffles of different widths - this will be fixed in a follow-up commit.
Reapplying this as rL368307 had to be reverted as part of rL368660 to revert rL368276
llvm-svn: 368662
This introduced a false positive MemorySanitizer warning about use of
uninitialized memory in a vectorized crc function in Chromium. That suggests
maybe something is not right with this transformation. See
https://crbug.com/992853#c7 for a reproducer.
This also reverts the follow-up commits r368307 and r368308 which
depended on this.
> This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
>
> In particular this helps remove some unnecessary scalar->vector->scalar patterns.
>
> The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
>
> Differential Revision: https://reviews.llvm.org/D65887
llvm-svn: 368660
We need AVX512BW to be able to truncate an i16 vector. If we don't
have that we have to extend i16->i32, then trunc, i32->i8. But we
won't be able to remove the min/max if we do that. At least not
without more special handling.
llvm-svn: 368623
If we're after type legalize, we should make sure we won't create
a store with an illegal type when we separate the AVG pattern
from the truncating store.
I don't know of a way to fail for this today. Just noticed while
I was in the vicinity.
llvm-svn: 368608
The test case that changed is probably better served through
allowing combineTruncatedArithmetic to create narrow vectors. It
also appears InstCombine would have simplified this test case
to remove the zext and trunc anyway.
llvm-svn: 368522
On SSE41+ targets we always lower vector shuffles to ZERO_EXTEND_VECTOR_INREG, even if we don't need the extended bits.
This patch relaxes this so that we lower to ANY_EXTEND_VECTOR_INREG if we can, meaning that shuffle combines have a better idea of what elements need to be kept zero. This helps the multiple reduction code as we can now combine away a lot more of the pack+extend codes.
Differential Revision: https://reviews.llvm.org/D65741
llvm-svn: 368515
Summary:
This patch adds a special DAG combine for SSE1 to recognize the IR pattern InstCombine gives us for movmsk. This only does the recognition for a few cases where its obvious the input won't be scalarized resulting in building a vector just do to the movmsk. I've made it separate from our existing matching for movmsk since that's called in multiple places and I didn't spend time to see if the other callers would make sense here. Plus the restrictions and additional checks would complicate that.
This fixes the case from PR42870. Buts its probably still broken the presence of logic ops feeding the movmsk pattern which would further hide the v4f32 type.
Reviewers: spatel, RKSimon, xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65689
llvm-svn: 368506
Summary:
On windows if the frame size exceed 4096 bytes, compiler need to
generate a call to _alloca_probe. X86CallFrameOptimization pass
changes the reserved stack size and cause of stack probe function
not be inserted. This patch fix the issue by detecting the call
frame size, if the size exceed 4096 bytes, drop X86CallFrameOptimization.
Reviewers: craig.topper, wxiao3, annita.zhang, rnk, RKSimon
Reviewed By: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65923
llvm-svn: 368503
As discussed on PR42825, if we are inverting the selection mask we can just swap the inputs and avoid the inversion.
Differential Revision: https://reviews.llvm.org/D65522
llvm-svn: 368438
The only way to generate these was through promoting legalization
of narrow vectors, but we widen those types now. So we shouldn't
produce these nodes.
llvm-svn: 368396
Craig Topper