This can cause the vectorizer to generate interleaved scalar
code which might be ok for some CPUs, but definitely not all.
Disable it to restore the previous scalar behavior.
Differential Revision: https://reviews.llvm.org/D103787
We should be exiting when the shift amount is greater than
the bit width regardless of whether it is a power of 2.
Reported by Simon Pilgrim here https://reviews.llvm.org/D96661
This requires getting a shift amount that is out of bounds that
wasn't already optimized by SelectionDAG. This would be pretty
trick to construct a test for.
Or it would require a non-power of 2 shift amount and a mask
that has runs of ones and zeros of the next lowest power of 2 from
that shift amount. I tried a little to produce a test for this,
but didn't get it to work.
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
All that really matters is that the VLMAX of the preceding
instructions is the same as the VLMAX required by the mask
operation.
Also update the vmsge(u) handling to use the SEW/LMUL we use for
other mask register operations. We were matching it to the compare
before. Some cases will be improve if we fix masked compares to
use tail agnostic policy. I think they ignore the tail policy
anyway.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D103299
This patch addresses an issue in which fixed-length (VLS) vector RVV
code could fail to reserve an emergency spill slot for their frame index
elimination. This is because we were previously only reserving a spill
slot when there were `scalable-vector` frame indices being used.
However, fixed-length codegen uses regular-type frame indices if it
needs to spill.
This patch does the fairly brute-force method of checking ahead of time
whether the function contains any RVV spill instructions, in which case
it reserves one slot. Note that the second RVV slot is still only
reserved for `scalable-vector` frame indices.
This unfortunately causes quite a bit of churn in existing tests, where
we chop and change stack offsets for spill slots.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103269
RVV vectors must be aligned to their element types, so anything less is
unaligned.
For regular loads and stores, our custom-lowering of fixed-length
vectors meant that we opted out of LegalizeDAG's built-in unaligned
expansion. This patch adds that logic in to our custom lower function.
For masked intrinsics, we declare that anything unaligned is not legal,
leaving the ScalarizeMaskedMemIntrin pass to do the expansion for us.
Note that neither of these methods can handle the expansion of
scalable-vector memory ops, so those cases are left alone by this patch.
Scalable loads and stores already go through expansion by default but
hit an assertion, and scalable masked intrinsics will silently generate
incorrect code. It may be prudent to return an error in both of these
cases.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102493
The first source has the same EEW as the destination, but we're
using earlyclobber which prevents them from ever being the same
register.
To workaround this, add a special TIED pseudo to use whenever the
first source and merge operand are the same value. This allows
us to use a single operand for the merge operand and first source
which we can then tie to the destination. A tied source disables
earlyclobber for that operand.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D103211
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
This guarantees they meet this overlap exception:
"The destination EEW is smaller than the source EEW and the overlap
is in the lowest-numbered part of the source register group"
Being a single register guarantees the overlap is always in the
lowerst-number part of the group.
Reviewed By: frasercrmck, khchen
Differential Revision: https://reviews.llvm.org/D103351
Compares are considered a narrowing operation for register overlap.
I believe for LMUL<=1 they meet this exception to allow overlap
"The destination EEW is smaller than the source EEW and the overlap is in the
lowest-numbered part of the source register group"
Both the result and the sources will occupy a single register for
LMUL<=1 so the overlap would always be in the "lowest-numbered part".
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D103336
This patch extends the RISC-V lowering of the 'fastcc' calling
convention to vector types, both fixed-length and scalable. Without this
patch, any function passing or returning vector types by value would
throw a compiler error.
Vectors are handled in 'fastcc' much as they are in the default calling
convention, the noticeable difference being the extended set of scalar
GPR registers that can be used to pass vectors indirectly.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102505
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch fixes a bug in lowering scalable-vector types in RISC-V's
main calling convention. When scalable-vector types are split and passed
indirectly, the target is responsible for scaling the offset --
initially set to the known-minimum store size -- by the scalable factor.
Before this we were issuing overlapping loads or stores to the different
parts, leading to incorrect codegen.
Credit to @HsiangKai for spotting this.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D103262
This patch custom lowers FP_TO_[US]INT and [US]INT_TO_FP conversions
between floating-point and boolean vectors. As the default action is
scalarization, this patch both supports scalable-vector conversions and
improves the code generation for fixed-length vectors.
The lowering for these conversions can piggy-back on the existing
lowering, which lowers the operations to a supported narrowing/widening
conversion and then either an extension or truncation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103312
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This is cleaner than slicing the MxList to remove elements from
the beginning or end since that requires hardcoding the size.
I don't expect the size of the list to change, but we shouldn't
repeat it in multiple places.
Since ca5f07f8c4 already reverted
the cause for this warning, this commit now causes warnings about
a default label in a switch that covers the enum.
This reverts commit cf2eeb114c.
If an instruction's AVL operand is a PHI node in the same block,
we may be able to peek through the PHI to find vsetvli instructions
that produce the AVL in other basic blocks. If we can prove those
vsetvli instructions have the same VTYPE and were the last vsetvli
in their respective blocks, then we don't need to insert a vsetvli
for this pseudo instruction.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D103277
This can help avoid needing a virtual register for the vsetvl output
when the AVL is X0. For other register AVLs it can shorter the live
range of the AVL register if it isn't needed later.
There's probably no advantage when AVL is a 5 bit immediate that
can use vsetivli. But do it anyway for consistency.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D103215
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
DAGCombine's `mergeStoresOfConstantsOrVecElts` optimization is told
whether it's to use vector types and also whether it's to issue a
truncating store. However, the truncating store code path assumes a
scalar integer `ConstantSDNode`, and when using vector types it creates
either a `BUILD_VECTOR` or `CONCAT_VECTORS` to store: neither of which
is a constant.
The `riscv64` target is able to expose a crash here because it switches
on both code paths at the same time. The `f32` is stored as `i32` which
must be promoted to `i64`, necessitating a truncating store.
It also decides later that it prefers a vector store of `v2f32`.
While vector truncating stores are legal, this combine is not able to
emit them. We also don't have a test case. This patch adds an assert to
catch this case more gracefully, and updates one of the caller functions
to the function to turn off the use of truncating stores when preferring
vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103173
The vector calling convention dictates that when the vector argument
registers are exhaused, GPRs are used to pass the address via the stack.
When the GPRs themselves are exhausted, at best we would previously
crash with an assertion, and at worst we'd generate incorrect code.
This patch addresses this issue by passing fixed-length vectors via the
stack with their full fixed-length size and aligned to their element
type size. Since the calling convention lowering can't yet handle
scalable vector types, this patch adds a fatal error to make it clear
that we are lacking in this regard.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102422
This patch extends the cases in which the legalizer is able to express
VSELECT in terms of XOR/AND/OR. When dealing with a VSELECT between
boolean vector types, the mask itself is an all-ones or all-ones value
of the operand type, so a 0/1 boolean type behaves identically to a 0/-1
type.
This greatly helps RISC-V which relies on expansion for these nodes. It
also allows scalable-vector bool VSELECTs to use the default expansion,
where before it would crash in SelectionDAG::UnrollVectorOp.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103147
We aren't going to connect the result to anything so we might
as well avoid allocating a register.
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D102031
In objdump, many targets support `-M no-aliases`. Instead of having a
`-*-no-aliases` for each target when LLVM adds the support, it makes more sense
to introduce objdump style `-M`.
-riscv-arch-reg-names is removed. -riscv-no-aliases has too many uses and thus is retained for now.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D103004
SEW=64 shifts only uses the log2(64) bits of shift amount. If we're
splatting a 64 bit value in 2 parts, we can avoid splatting the
upper bits and just let the low bits be sign extended. They won't
be read anyway.
For the purposes of SelectionDAG semantics of the generic ISD opcodes,
if hi was non-zero or bit 31 of the low is 1, the shift was already
undefined so it should be ok to replace high with sign extend of low.
In order do be able to find the split i64 value before it becomes
a stack operation, I added a new ISD opcode that will be expanded
to the stack spill in PreprocessISelDAG. This new node is conceptually
similar to BuildPairF64, but I expanded earlier so that we could
go through regular isel to get the right VLSE opcode for the LMUL.
BuildPairF64 is expanded in a CustomInserter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102521
It's conceivable someone could put a vsetvli in inline assembly
so its safer to consider them as barriers. The alternative would
be to trust that the user marks VL and VTYPE registers as clobbers
of the inline assembly if they do that, but hat seems error prone.
I'm assuming inline assembly in vector code is going to be rare.
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D103126
This patch extends D102737 to allow VL/VTYPE changes to be taken
into account before adding an explicit vsetvli.
We do this by using a data flow analysis to propagate VL/VTYPE
information from predecessors until we've determined a value for
every value in the function.
We use this information to determine if a vsetvli needs to be
inserted before the first vector instruction the block.
Differential Revision: https://reviews.llvm.org/D102739
This is a replacement for D101938 for inserting vsetvli
instructions where needed. This new version changes how
we track the information in such a way that we can extend
it to be aware of VL/VTYPE changes in other blocks. Given
how much it changes the previous patch, I've decided to
abandon the previous patch and post this from scratch.
For now the pass consists of a single phase that assumes
the incoming state from other basic blocks is unknown. A
follow up patch will extend this with a phase to collect
information about how VL/VTYPE change in each block and
a second phase to propagate this information to the entire
function. This will be used by a third phase to do the
vsetvli insertion.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102737
If the local variable `NumOfVReg` isPowerOf2_32(NumOfVReg - 1) or isPowerOf2_32(NumOfVReg + 1), the ADDI and MUL instructions can be replaced with SLLI and ADD(or SUB) instructions.
Based on original patch by StephenFan.
Reviewed By: frasercrmck, StephenFan
Differential Revision: https://reviews.llvm.org/D100577
RVV code generation does not successfully custom-lower BUILD_VECTOR in all
cases. When it resorts to default expansion it may, on occasion, be expanded to
scalar stores through the stack. Unfortunately these stores may then be picked
up by the post-legalization DAGCombiner which merges them again. The merged
store uses a BUILD_VECTOR which is then expanded, and so on.
This patch addresses the issue by overriding the `mergeStoresAfterLegalization`
hook. A lack of granularity in this method (being passed the scalar type) means
we opt out in almost all cases when RVV fixed-length vector support is enabled.
The only exception to this rule are mask vectors, which are always either
custom-lowered or are expanded to a load from a constant pool.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102913
This adds the {s,u,m}badaddr CSR aliases as well as the sptbr alias.
These are for compatibility with binutils. Furthermore, these are used
by the RISC-V Proxy Kernel and are required to enable building the Proxy
Kernel with the LLVM IAS.
The aliases here are deprecated. These are being introduced in order to
provide a compatibility story for the existing GNU toolchain, which
still supports the deprecated spelling in the assembler. However, in
order to encourage the migration of existing coding, we provide warnings
indicating that the aliased CSRs are deprecated and should be replaced.
Differential Revision: https://reviews.llvm.org/D101919
Reviewed By: Craig Topper
The default expansion for BUILD_VECTORs -- save for going through
shuffles -- is to go through the stack. This method only works when the
type is at least byte-sized, so for v2i1 and v4i1 we would crash.
This patch ensures that small mask-type BUILD_VECTORs are always handled
without crashing. We lower to a SETCC of the equivalent i8 type.
This also exposes some pre-existing issues where the lowering when
optimizing for size results in larger code than without. Those will be
tackled in future patches.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102767
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Like the element extraction of these vectors, we choose to promote up to
an i8 vector type and perform the insertion there.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102697
Where the RVV specification writes `vs2, vs1`, our TableGen patterns use
`rs1, rs2`. These differences can easily cause confusion. The VMANDNOT
instruction performs `LHS && !RHS`, and similarly for VMORNOT.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102606
The ComplexPattern is looking for an immediate in a certain range
that has a single use. This can be handled with a PatLeaf since
we aren't matching multiple patterns or checking any complicated
relationships between nodes.
This shrinks the isel table a little bit since tablegen no longer
has to generate patterns with commuted operands. With the PatLeaf,
tablegen can see we're matching an immediate which should always
be on the right hand side of add.
Reviewed By: benshi001
Differential Revision: https://reviews.llvm.org/D102510
The MachineBasicBlock::iterator is continuously changing during
generating the frame handling instructions. We should use the DebugLoc
from the caller, instead of getting it from the changing iterator.
If the prologue instructions located in a basic block without any other
instructions after these prologue instructions, the iterator will be
updated to the boundary of the basic block and it is invalid to use the
iterator to access DebugLoc. This patch also fixes the crash when
accessing DebugLoc using the iterator.
Differential Revision: https://reviews.llvm.org/D102386
The VSEW encoding isn't a useful value to pass around. It's better
to use SEW or log2(SEW) directly. The only real ugliness is that
the vsetvli IR intrinsics use the VSEW encoding, but it's easy
enough to decode that when the intrinsic is processed.
Similar to X86 D73230 and AArch64 D101872
With this change, we can set dso_local in clang's -fpic -fno-semantic-interposition mode,
for default visibility external linkage non-ifunc-non-COMDAT definitions.
For such dso_local definitions, variable access/taking the address of a
function/calling a function will go through a local alias to avoid GOT/PLT.
Reviewed By: jrtc27, luismarques
Differential Revision: https://reviews.llvm.org/D101875
My thought process is that if v2i64 is an LMUL=1 type then v2i32
should be an LMUL=1/2 type. We limit the fractional LMUL so that
SEW=64 clips to LMUL=1, SEW=32 clips to LMUL=1/2, etc. This
ensures there's always a fractional LMUL available to truncate a type.
This does reduce the number of vsetvlis in some cases.
Some tests increase vsetvlis because the best container type for a
mask type is dependent on the LMUL+SEW that the mask was produced
from, but you can't tell that from the type. I think this is
something we need to solve this in the machine IR when optimizing
vsetvlis.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D101215
Limited to splats because we would need to truncate the shift
amount vector otherwise.
I tried to do this with new ISD nodes and a DAG combine to
avoid such a large pattern, but we don't form the splat until
LegalizeDAG and need DAG combine to remove a scalable->fixed->scalable
cast before it becomes visible to the shift node. By the time that
happens we've already visited the truncate node and won't revisit it.
I think I have an idea how to improve i64 on RV32 I'll save for a
follow up.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102019
For Zvlsseg spilling, we need to convert the pseudo instructions
into multiple vector load/store instructions with appropriate offsets.
For example, for PseudoVSPILL3_M2, we need to convert it to
VS2R %v2, %base
ADDI %base, %base, (vlenb x 2)
VS2R %v4, %base
ADDI %base, %base, (vlenb x 2)
VS2R %v6, %base
We need to keep the size of the offset in the pseudo spilling instructions.
In this case, it is (vlenb x 2).
In the original implementation, we use the size of frame objects divide the
number of vectors in zvlsseg types. The size of frame objects is not
necessary exactly the same as the spilling data. It may be larger than
it. So, we change it to (VLENB x LMUL) in this patch. The calculation is
more direct and easy to understand.
Differential Revision: https://reviews.llvm.org/D101869
This patch extends VectorLegalizer::ExpandSELECT to permit expansion
also for scalable vector types. The only real change is conditionally
checking for BUILD_VECTOR or SPLAT_VECTOR legality depending on the
vector type.
We can use this to fix "cannot select" errors for scalable vector
selects on the RISCV target. Note that in future patches RISCV will
possibly custom-lower vector SELECTs to VSELECTs for branchless codegen.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102063
Use result_type for the IMPLICIT_DEF in masked vector patterns.
This doesn't matter today because result_type and op_type are
always the same.
Use multiclass inheritance to reduce repeated code.
Rename RVInstR4 as used by F/D/Zfh extensions to RVInstR4Frm.
Introduce new RVInstR4 that takes funct3 as a parameter.
Add new format classes for FSRI and FSRIW instead of trying to
bend RVInstR4 to use a shamt overlayed on rs2 and funct2.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100427
This patch supports all of the current set of VP integer binary
intrinsics by lowering them to to RVV instructions. It does so by using
the existing RISCVISD *_VL custom nodes as an intermediate layer. Both
scalable and fixed-length vectors are supported by using this method.
One notable change to the existing vector codegen strategy is that
scalable all-ones and all-zeros mask SPLAT_VECTORs are now lowered to
RISCVISD VMSET_VL and VMCLR_VL nodes to match their fixed-length
BUILD_VECTOR counterparts. This allows them to reuse the existing
"all-ones" VL patterns.
To reduce the size of the phabricator diff, some tests are intentionally
left out and will be added later if the patch is accepted.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101826
Previously, RISC-V would make legal all fixed-length vectors types whose
size are less than or equal to some function of the minimum value of
VLEN and the maximum-permissible LMUL grouping.
Due to vector legalization issues, this patch instead caps the legal
fixed-length vector types to those with 256 elements. This value was
chosen because it is the longest vector length which has corresponding
MVTs across all supported element types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101839
This patch adds support for splatting i1 types to fixed-length or
scalable vector types. It does so by lowering the operation to a SETCC
of the equivalent i8 type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101465
This shrinks the immediate that isel table needs to emit for these
instructions. Hoping this allows me to change OPC_EmitInteger to
use a better variable length encoding for representing negative
numbers. Similar to what was done a few months ago for OPC_CheckInteger.
The alternative encoding uses less bytes for negative numbers, but
increases the number of bytes need to encode 64 which was a very
common number in the RISCV table due to SEW=64. By using Log2 this
becomes 6 and is no longer a problem.
DAGCombiner was recently taught how to combine STEP_VECTOR nodes,
meaning the step value is no longer guaranteed to be one by the time it
reaches the backend for lowering.
This patch supports such cases on RISC-V by lowering to other step
values to a multiply following the vid.v instruction. It includes a
small optimization for common cases where the multiply can be expressed
as a shift left.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D100856
When rvv vector objects existed, using sp to access the fixed stack object will pass the rvv vector objects field. So the StackOffset needs add a scalable offset of the size of rvv vector objects field
Differential Revision: https://reviews.llvm.org/D100286
Similar for or/xor with 0 in place of -1.
This is the canonical form produced by InstCombine for something like `c ? x & y : x;` Since we have to use control flow to expand select we'll usually end up with a mv in basic block. By folding this we may be able to pull the and/or/xor into the block instead and avoid a mv instruction.
The code here is based on code from ARM that uses this to create predicated instructions. I'm doing it on SELECT_CC so it happens late, but we could do it on select earlier which is what ARM does. I'm not sure if we lose any combine opportunities if we do it earlier.
I left out add and sub because this can separate sext.w from the add/sub. It also made a conditional i64 addition/subtraction on RV32 worse. I guess both of those would be fixed by doing this earlier on select.
The select-binop-identity.ll test has not been commited yet, but I made the diff show the changes to it.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D101485
This replaces D98479.
This allows type legalization to form SPLAT_VECTOR_PARTS so we don't
lose the splattedness when the scalar type is split.
I'm handling SPLAT_VECTOR_PARTS for fixed vectors separately so
we can continue using non-VL nodes for scalable vectors.
I limited to RV32+vXi64 because DAGCombiner::visitBUILD_VECTOR likes
to form SPLAT_VECTOR before seeing if it can replace the BUILD_VECTOR
with other operations. Especially interesting is a splat BUILD_VECTOR of
the extract_vector_elt which can become a splat shuffle, but won't if
we form SPLAT_VECTOR first. We either need to reorder visitBUILD_VECTOR
or add visitSPLAT_VECTOR.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100803
This seems like a reasonable upper bound on VL. WG discussions for
the V spec would probably allow us to use 2^16 as an upper bound
on VLEN, but this is good enough for now.
This allows us to remove sext and zext if user happens to assign
the size_t result into an int and then uses it as a VL intrinsic
argument which is size_t.
Reviewed By: frasercrmck, rogfer01, arcbbb
Differential Revision: https://reviews.llvm.org/D101472
This is an complementary/alternative fix for D99068. It takes a slightly
different approach by explicitly summing up all of the required split
part type sizes and ensuring we allocate enough space for them. It also
takes the maximum alignment of each part.
Compared with D99068 there are fewer changes to the stack objects in
existing tests. However, @luismarques has shown in that patch that there
are opportunities to reduce our stack usage in the future.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D99087
This adds a special operand type that is allowed to be either
an immediate or register. By giving it a unique operand type the
machine verifier will ignore it.
This perturbs a lot of tests but mostly it is just slightly different
instruction orders. Something bad did happen to some min/max reduction
tests. We're spilling vector registers when we weren't before.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D101246
This modifies my previous patch to push the strided load formation
to isel. This gives us opportunity to fold the splat into a .vx
operation first. Using a scalar register and a .vx operation reduces
vector register pressure which can be important for larger LMULs.
If we can't fold the splat into a .vx operation, then it can make
sense to use a strided load to free up the vector arithmetic
ALU to do actual arithmetic rather than tying it up with vmv.v.x.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D101138
We have several extensions that need i32 to be Custom for
INTRINSIC_WO_CHAIN with RV64 so enable it for all RV64.
For V extension, make i32 Custom for RV64 and i64 Custom for RV32.
When the i32 or i64 is legal, the operation action doesn't matter.
LegalizeDAG checks MVT::Other rather than the real type.
This teaches DAG combine that shift amount operands for grev, gorc
shfl, unshfl only read a few bits.
This also teaches DAG combine that grevw, gorcw, shflw, unshflw,
bcompressw, bdecompressw only consume the lower 32 bits of their
inputs.
In the future we can teach SimplifyDemandedBits to also propagate
demanded bits of the output to the inputs in some cases.
Use getContainerForFixedLengthVector and getRegClassIDForVecVT to
get the register class to use when making a fixed vector type legal.
Inline it into the other two call sites.
I'm looking into using fractional lmul for fixed length vectors
and getLMULForFixedLengthVector returned an integer making it
unable to express this. I considered returning the LMUL
enum, but that seemed like it would introduce more complexity to
convert it for use.
Make it a static function RISCVISelLowering, the only place it
is used.
I think I'm going to make this return a fractional LMULs in some
cases so I'm sorting out where it should live before I start
making changes.
We can have RISCVISelDAGToDAG.cpp call the VT only version by
finding the RISCVTargetLowering object via the Subtarget.
Make the static versions just global static functions in
RISCVISelLowering that can be called by static functions in that
file.
Theses instructions are allowed to write v0 when they are masked.
We'll still never use v0 because of the earlyclobber constraint so
this doesn't really help anything. It just makes the definitions
correct.
While I was there remove an unused multiclass I noticed.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D101118
This patch adds support for both scalable- and fixed-length vector code
lowering of the llvm.minnum and llvm.maxnum intrinsics to the equivalent
RVV instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101035
These instructions don't really exist, but we have ways we can
emulate them.
.vv will swap operands and use vmsle().vv. .vi will adjust the
immediate and use .vmsgt(u).vi when possible. For .vx we need to
use some of the multiple instruction sequences from the V extension
spec.
For unmasked vmsge(u).vx we use:
vmslt{u}.vx vd, va, x; vmnand.mm vd, vd, vd
For cases where mask and maskedoff are the same value then we have
vmsge{u}.vx v0, va, x, v0.t which is the vd==v0 case that
requires a temporary so we use:
vmslt{u}.vx vt, va, x; vmandnot.mm vd, vd, vt
For other masked cases we use this sequence:
vmslt{u}.vx vd, va, x, v0.t; vmxor.mm vd, vd, v0
We trust that register allocation will prevent vd in vmslt{u}.vx
from being v0 since v0 is still needed by the vmxor.
Differential Revision: https://reviews.llvm.org/D100925
Refactor to use new multiclass instead of individual patterns.
We already supported this due to SEW=64 on RV32, but we didn't have
test cases for all the types we supported.
Part of D100925
We don't have instructions for these, but can swap the operands
to use vmle/vmflt. This makes the IR interface more consistent and
simplifies the frontend implementation.
Part of D100925
Implementations are allowed to optimize an x0 stride to perform
less memory accesses. This is the case in SiFive cores.
No idea if this is the case in other implementations. We might
need a tuning flag for this.
Reviewed By: frasercrmck, arcbbb
Differential Revision: https://reviews.llvm.org/D100815
Rather than doing splatting each separately and doing bit manipulation
to merge them in the vector domain, copy the data to the stack
and splat it using a strided load with x0 stride. At least on
some implementations this vector load is optimized to not do
a load for each element.
This is equivalent to how we move i64 to f64 on RV32.
I've only implemented this for the intrinsic fallbacks in this
patch. I think we do similar splatting/shifting/oring in other
places. If this is approved, I'll refactor the others to share
the code.
Differential Revision: https://reviews.llvm.org/D101002
The value is always an immediate and can never be in a register.
This the kind of thing TargetConstant is for.
Saves a step GenDAGISel to convert a Constant to a TargetConstant.
This recognizes the case when Hi is (sra Lo, 31). We can use
SPLAT_VECTOR_I64 rather than splatting the high bits and
combining them in the vector register.
This previously made references to 2.3-draft which was a short
lived version number in 2017. It was replaced by date based
versions leading up to ratification.
This patch uses the latest ratified version number and just says
what the behavior is. Nothing here is in flux.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100878
This was checked in some asserts, but not enforced by the
instruction matching.
There's still a second bug that we don't check that vt and vd
are different registers, but that will require custom checking.
Differential Revision: https://reviews.llvm.org/D100928
This patch fixes a case missed out by D100574, in which RVV scalable
stack offset computations may require three live registers in the case
where the offset's fixed component is 12 bits or larger and has a
scalable component.
Instead of adding an additional emergency spill slot, this patch further
optimizes the scalable stack offset computation sequences to reduce
register usage.
By emitting the sequence to compute the scalable component before the
fixed component, we can free up one scratch register to be reallocated
by the sequence for the fixed component. Doing this saves one register
and thus one additional emergency spill slot.
Compare:
$x5 = LUI 1
$x1 = ADDIW killed $x5, -1896
$x1 = ADD $x2, killed $x1
$x5 = PseudoReadVLENB
$x6 = ADDI $x0, 50
$x5 = MUL killed $x5, killed $x6
$x1 = ADD killed $x1, killed $x5
versus:
$x5 = PseudoReadVLENB
$x1 = ADDI $x0, 50
$x5 = MUL killed $x5, killed $x1
$x1 = LUI 1
$x1 = ADDIW killed $x1, -1896
$x1 = ADD $x2, killed $x1
$x1 = ADD killed $x1, killed $x5
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D100847
New registers FRM, FFLAGS and FCSR was defined. They represent
corresponding system registers. The new registers are necessary to
properly order floating point instructions in non-default modes.
Differential Revision: https://reviews.llvm.org/D99083
This patch adds an additional emergency spill slot to RVV code. This is
required as RVV stack offsets may require an additional register to compute.
This patch includes an optimization by @HsiangKai <kai.wang@sifive.com>
to reduce the number of registers required for the computation of stack
offsets from 3 to 2. Otherwise we'd need two additional emergency spill
slots.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D100574
It's necessary to calculate correct instruction size because
PseudoVRELOAD and PseudoSPILL will be expanded into multiple
instructions.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100702
As noted in the FIXME there's a sort of agreement that the any
extra bits stored will be 0.
The generated code is pretty terrible. I was really hoping we
could use a tail undisturbed trick, but tail undisturbed no
longer applies to masked destinations in the current draft
spec.
Fingers crossed that it isn't common to do this. I doubt IR
from clang or the vectorizer would ever create this kind of store.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100618
This patch extends the lowering of RVV fixed-length vector shuffles to
avoid the default stack expansion and instead lower to vrgather
instructions.
For "permute"-style shuffles where one vector is swizzled, we can lower
to one vrgather. For shuffles involving two vector operands, we lower to
one unmasked vrgather (or splat, where appropriate) followed by a masked
vrgather which blends in the second half.
On occasion, when it's not possible to create a legal BUILD_VECTOR for
the indices, we use vrgatherei16 instructions with 16-bit index types.
For 8-bit element vectors where we may have indices over 255, we have a
fairly blunt fallback to the stack expansion to avoid custom-splitting
of the vector types.
To enable the selection of masked vrgather instructions, this patch
extends the various RISCVISD::VRGATHER nodes to take a passthru operand.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100549
It has to save all caller-saved registers before a call in the handler.
So don't emit a call that save/restore registers.
Reviewed By: simoncook, luismarques, asb
Differential Revision: https://reviews.llvm.org/D100532
This generalizes RVInstIShift/RVInstIShiftW to take the upper
5 or 7 bits of the immediate as an input instead of only bit 30. Then
we can share them.
For RVInstIShift I left a hardcoded 0 at bit 26 where RV128 gets
a 7th bit for the shift amount.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100424
Prep work for adding intrinsics in the future.
Left an assert that the input is constant in ReplaceNodeResults,
as the intrinsic shouldn't go through that path.
This patch adds more optimized codegen for the above SETCC forms,
by matching the '.vi' vector forms when the immediate is a 5-bit signed
immediate plus 1. The immediate can be decremented and the corresponding
SET[U]LE or SET[U]GT forms can be matched.
This work was left as a TODO from D94168.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100096
The first source has the same EEW as the destination and the other
source is a scalar so the overlap constraints don't apply to
the unmasked version.
For the masked version we have a constraint that the destination
can't be V0 so that covers the only overlap issue there.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D100217
New SDTypeProfile can be reused for other word operation patterns without explicit i64 type in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100097
Add explicit type i64 to RV64 only patterns to stop emitting unneeded i32 patterns.
It can reduce the isel table size.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100089
Instead of instantiating multiclasses inside multiclasses, just
inherit from them.
We can do the same for the VPseudo* multiclasses, but that may
interfere with the scheduler class work.
Add InstAlias that allows the last operand to be an imm for following instructions:
1. Zbb or Zbp:
- ror
- rorw (RV64 Only)
2. Zbs
- best
- bclr
- binv
- bext
Reviewed By: craig.topper, jrtc27
Differential Revision: https://reviews.llvm.org/D100083
This patch adds RVV codegen support for OR/XOR/AND reductions for both
scalable- and fixed-length vector types. There are a few possible
codegen strategies for each -- vmfirst.m, vmsbf.m, and vmsif.m could be
used to some extent -- but the vpopc.m instruction was chosen since it
produces the scalar result in one instruction, after which scalar
instructions can finish off the computation.
The reductions are lowered identically for both scalable- and
fixed-length vectors, although some alternate strategies may be more
optimal on fixed-length vectors since it's cheaper to get the length of
those types.
Other reduction types were not deemed to be relevant for mask vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100030
If the stack size is larger than 12 bits, we have to use a scratch
register to store the stack size. Before we introduce the scalable stack
offset, we could simplify
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%0 = ADD %fp, %scratch
However, if the offset contains scalable part, we need to consider it.
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%scratch = ADD %fp, %scratch
%scalable_offset = ... # sequence of instructions for vscaled-offset.
%0 = ADD/SUB %scratch, %scalable_offset
Differential Revision: https://reviews.llvm.org/D100035
New custom DAG nodes were added to represent operations on CSR. These
nodes are lowered to corresponding pseudo instruction. Using the pseudo
instructions allows to specify different scheduling information for
operations on different system registers. It also make possible to
specify dependencies of instructions on specific system registers.
Differential Revision: https://reviews.llvm.org/D98936
If the constants have a difference of 1 we can convert one to
the other by adding or subtracting the condition.
We have a DAG combine for this, but it only runs before type
legalization. If the select is introduced later during type
legalization or op legalization we will miss it.
We don't need a specific condition, but some conditions are
harder to materialize than others on RISCV. I know that SETLT
will be a single instruction and it is what is used by the
motivating pattern from signed saturating add/sub.
Differential Revision: https://reviews.llvm.org/D99021
This can't use our normal strategy of splatting the scalar and using
a .vv operation instead of .vx.
Instead this patch bitcasts the vector to the equivalent SEW=32
vector and inserts the scalar parts using two vslide1up/down. We
do that unmasked and apply the mask separately at the end with
a vmerge.
For vslide1up there maybe some other options here like getting
i64 into element 0 and using vslideup.vi with this vector as
vd and the original source as vs1. Masking would still need to
be done afterwards.
That idea doesn't work for vslide1down. We need to slidedown and
then insert a single scalar at vl-1 which we could do with a
vslideup, but that assumes vl > 0 which I don't think we can assume.
The i32 double slide1down implemented here is the best I could come
up with and I just made vslide1up consistent.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D99910
We encountered a hang in our internal code base. I'm having trouble
creating a test case because the test that hit it was testing some
code that is not upstream.
Many of the operands are handled the same or in the same order
for all these intrinsics. Factor out the code for selecting and
pushing them into the Operands vector.
Differential Revision: https://reviews.llvm.org/D99923
I missed a few intrinsics in 3dd4aa7d09
when I did this for masked loads and masked segment loads/stores.
Found while trying to share more code between these custom isel
functions.
It's a bit silly, but it allows us to write stricter type
constraints for isel. There's still some extra type checks in
the generated table due to some type interference limitations
around HWMode.
This patch supports bitcasts from scalar types to fixed-length vectors
and vice versa. It custom-lowers and custom-legalizes them to
EXTRACT_VECTOR_ELT/INSERT_VECTOR_ELT operations, using a single-element
vectors to hold the scalar where appropriate.
Previously, some of these would fail to select, others would be expanded
through stack loads and stores. Effort was made to ensure the codegen
avoids the stack for both legal and illegal scalar types.
Some of the codegen could be improved, but on first glance it looks like
a general optimization of EXTRACT_VECTOR_ELT when extracting an i64
element on RV32.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99667
Craig Topper