The value is always an immediate and can never be in a register.
This the kind of thing TargetConstant is for.
Saves a step GenDAGISel to convert a Constant to a TargetConstant.
This recognizes the case when Hi is (sra Lo, 31). We can use
SPLAT_VECTOR_I64 rather than splatting the high bits and
combining them in the vector register.
This previously made references to 2.3-draft which was a short
lived version number in 2017. It was replaced by date based
versions leading up to ratification.
This patch uses the latest ratified version number and just says
what the behavior is. Nothing here is in flux.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100878
This was checked in some asserts, but not enforced by the
instruction matching.
There's still a second bug that we don't check that vt and vd
are different registers, but that will require custom checking.
Differential Revision: https://reviews.llvm.org/D100928
This patch fixes a case missed out by D100574, in which RVV scalable
stack offset computations may require three live registers in the case
where the offset's fixed component is 12 bits or larger and has a
scalable component.
Instead of adding an additional emergency spill slot, this patch further
optimizes the scalable stack offset computation sequences to reduce
register usage.
By emitting the sequence to compute the scalable component before the
fixed component, we can free up one scratch register to be reallocated
by the sequence for the fixed component. Doing this saves one register
and thus one additional emergency spill slot.
Compare:
$x5 = LUI 1
$x1 = ADDIW killed $x5, -1896
$x1 = ADD $x2, killed $x1
$x5 = PseudoReadVLENB
$x6 = ADDI $x0, 50
$x5 = MUL killed $x5, killed $x6
$x1 = ADD killed $x1, killed $x5
versus:
$x5 = PseudoReadVLENB
$x1 = ADDI $x0, 50
$x5 = MUL killed $x5, killed $x1
$x1 = LUI 1
$x1 = ADDIW killed $x1, -1896
$x1 = ADD $x2, killed $x1
$x1 = ADD killed $x1, killed $x5
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D100847
New registers FRM, FFLAGS and FCSR was defined. They represent
corresponding system registers. The new registers are necessary to
properly order floating point instructions in non-default modes.
Differential Revision: https://reviews.llvm.org/D99083
This patch adds an additional emergency spill slot to RVV code. This is
required as RVV stack offsets may require an additional register to compute.
This patch includes an optimization by @HsiangKai <kai.wang@sifive.com>
to reduce the number of registers required for the computation of stack
offsets from 3 to 2. Otherwise we'd need two additional emergency spill
slots.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D100574
It's necessary to calculate correct instruction size because
PseudoVRELOAD and PseudoSPILL will be expanded into multiple
instructions.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100702
As noted in the FIXME there's a sort of agreement that the any
extra bits stored will be 0.
The generated code is pretty terrible. I was really hoping we
could use a tail undisturbed trick, but tail undisturbed no
longer applies to masked destinations in the current draft
spec.
Fingers crossed that it isn't common to do this. I doubt IR
from clang or the vectorizer would ever create this kind of store.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100618
This patch extends the lowering of RVV fixed-length vector shuffles to
avoid the default stack expansion and instead lower to vrgather
instructions.
For "permute"-style shuffles where one vector is swizzled, we can lower
to one vrgather. For shuffles involving two vector operands, we lower to
one unmasked vrgather (or splat, where appropriate) followed by a masked
vrgather which blends in the second half.
On occasion, when it's not possible to create a legal BUILD_VECTOR for
the indices, we use vrgatherei16 instructions with 16-bit index types.
For 8-bit element vectors where we may have indices over 255, we have a
fairly blunt fallback to the stack expansion to avoid custom-splitting
of the vector types.
To enable the selection of masked vrgather instructions, this patch
extends the various RISCVISD::VRGATHER nodes to take a passthru operand.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100549
It has to save all caller-saved registers before a call in the handler.
So don't emit a call that save/restore registers.
Reviewed By: simoncook, luismarques, asb
Differential Revision: https://reviews.llvm.org/D100532
This generalizes RVInstIShift/RVInstIShiftW to take the upper
5 or 7 bits of the immediate as an input instead of only bit 30. Then
we can share them.
For RVInstIShift I left a hardcoded 0 at bit 26 where RV128 gets
a 7th bit for the shift amount.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100424
Prep work for adding intrinsics in the future.
Left an assert that the input is constant in ReplaceNodeResults,
as the intrinsic shouldn't go through that path.
This patch adds more optimized codegen for the above SETCC forms,
by matching the '.vi' vector forms when the immediate is a 5-bit signed
immediate plus 1. The immediate can be decremented and the corresponding
SET[U]LE or SET[U]GT forms can be matched.
This work was left as a TODO from D94168.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100096
The first source has the same EEW as the destination and the other
source is a scalar so the overlap constraints don't apply to
the unmasked version.
For the masked version we have a constraint that the destination
can't be V0 so that covers the only overlap issue there.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D100217
New SDTypeProfile can be reused for other word operation patterns without explicit i64 type in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100097
Add explicit type i64 to RV64 only patterns to stop emitting unneeded i32 patterns.
It can reduce the isel table size.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100089
Instead of instantiating multiclasses inside multiclasses, just
inherit from them.
We can do the same for the VPseudo* multiclasses, but that may
interfere with the scheduler class work.
Add InstAlias that allows the last operand to be an imm for following instructions:
1. Zbb or Zbp:
- ror
- rorw (RV64 Only)
2. Zbs
- best
- bclr
- binv
- bext
Reviewed By: craig.topper, jrtc27
Differential Revision: https://reviews.llvm.org/D100083
This patch adds RVV codegen support for OR/XOR/AND reductions for both
scalable- and fixed-length vector types. There are a few possible
codegen strategies for each -- vmfirst.m, vmsbf.m, and vmsif.m could be
used to some extent -- but the vpopc.m instruction was chosen since it
produces the scalar result in one instruction, after which scalar
instructions can finish off the computation.
The reductions are lowered identically for both scalable- and
fixed-length vectors, although some alternate strategies may be more
optimal on fixed-length vectors since it's cheaper to get the length of
those types.
Other reduction types were not deemed to be relevant for mask vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100030
If the stack size is larger than 12 bits, we have to use a scratch
register to store the stack size. Before we introduce the scalable stack
offset, we could simplify
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%0 = ADD %fp, %scratch
However, if the offset contains scalable part, we need to consider it.
%0 = ADDI %stack.0, 0
=>
%scratch = ... # sequence of instructions to move the offset into
%%scratch
%scratch = ADD %fp, %scratch
%scalable_offset = ... # sequence of instructions for vscaled-offset.
%0 = ADD/SUB %scratch, %scalable_offset
Differential Revision: https://reviews.llvm.org/D100035
New custom DAG nodes were added to represent operations on CSR. These
nodes are lowered to corresponding pseudo instruction. Using the pseudo
instructions allows to specify different scheduling information for
operations on different system registers. It also make possible to
specify dependencies of instructions on specific system registers.
Differential Revision: https://reviews.llvm.org/D98936
If the constants have a difference of 1 we can convert one to
the other by adding or subtracting the condition.
We have a DAG combine for this, but it only runs before type
legalization. If the select is introduced later during type
legalization or op legalization we will miss it.
We don't need a specific condition, but some conditions are
harder to materialize than others on RISCV. I know that SETLT
will be a single instruction and it is what is used by the
motivating pattern from signed saturating add/sub.
Differential Revision: https://reviews.llvm.org/D99021
This can't use our normal strategy of splatting the scalar and using
a .vv operation instead of .vx.
Instead this patch bitcasts the vector to the equivalent SEW=32
vector and inserts the scalar parts using two vslide1up/down. We
do that unmasked and apply the mask separately at the end with
a vmerge.
For vslide1up there maybe some other options here like getting
i64 into element 0 and using vslideup.vi with this vector as
vd and the original source as vs1. Masking would still need to
be done afterwards.
That idea doesn't work for vslide1down. We need to slidedown and
then insert a single scalar at vl-1 which we could do with a
vslideup, but that assumes vl > 0 which I don't think we can assume.
The i32 double slide1down implemented here is the best I could come
up with and I just made vslide1up consistent.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D99910
We encountered a hang in our internal code base. I'm having trouble
creating a test case because the test that hit it was testing some
code that is not upstream.
Many of the operands are handled the same or in the same order
for all these intrinsics. Factor out the code for selecting and
pushing them into the Operands vector.
Differential Revision: https://reviews.llvm.org/D99923
I missed a few intrinsics in 3dd4aa7d09
when I did this for masked loads and masked segment loads/stores.
Found while trying to share more code between these custom isel
functions.
It's a bit silly, but it allows us to write stricter type
constraints for isel. There's still some extra type checks in
the generated table due to some type interference limitations
around HWMode.
This patch supports bitcasts from scalar types to fixed-length vectors
and vice versa. It custom-lowers and custom-legalizes them to
EXTRACT_VECTOR_ELT/INSERT_VECTOR_ELT operations, using a single-element
vectors to hold the scalar where appropriate.
Previously, some of these would fail to select, others would be expanded
through stack loads and stores. Effort was made to ensure the codegen
avoids the stack for both legal and illegal scalar types.
Some of the codegen could be improved, but on first glance it looks like
a general optimization of EXTRACT_VECTOR_ELT when extracting an i64
element on RV32.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99667
Caught in internal testing, these operations are assumed legal by
default, even for scalable vector types. Expand them back into separate
truncations and stores, or loads and extensions.
Also add explicit fixed-length vector tests for these operations, even
though they should have been correct already.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99654
The W version of orc.b does not exist in Zbp so we need to use
gorci encoding. If we have Zbp, we can use gorciw which can avoid a
sext.w in some cases.
As long as it's a constant we can directly pattern match it
without any problems. It's only when it isn't a constant that
we need to add an AND.
In theory this should allow more target independent optimizations
to remain active.
Head files are included in a separate patch in case the name needs to be changed.
RV32 / 64:
clmul
clmulh
clmulr
Differential Revision: https://reviews.llvm.org/D99711
Forgot to amend the Author.
Original commit message:
Header files are included in a separate patch in case the name needs to be changed.
RV32 / 64:
orc.b
Differential Revision: https://reviews.llvm.org/D99320
Implementation for RISC-V Zbr extension intrinsic.
Header files are included in separate patch in case the name needs to be changed
RV32 / 64:
crc32b
crc32h
crc32w
crc32cb
crc32ch
crc32cw
RV64 Only:
crc32d
crc32cd
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99009
For positive constants we try shifting left to remove leading zeros
and fill the bottom bits with 1s. We then materialize that constant
shift it right.
This patch adds a new strategy to try filling the bottom bits with
zeros instead. This catches some additional cases.
D99717 introduced some test cases which showed that the output of one
vsetvli into another would not be picked up by the RISCVCleanupVSETVLI
pass. This patch teaches the optimization about such a pattern. The
pattern is quite common when using the RVV vsetvli intrinsic to pass the
VL onto other intrinsics.
The second test case introduced by D99717 is left unoptimized by this
patch. It is a rarer case and will require us to rewire any uses of the
redundant vset[i]vli's output to the previous one's.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99730
This occurs when we type legalize an i64 scalar input on RV32. We
need to manually splat, which requires a vector input. Rather
than special case this in lowering just pattern match it.
The default legalization strategy is PromoteFloat which keeps
half in single precision format through multiple floating point
operations. Conversion to/from float is done at loads, stores,
bitcasts, and other places that care about the exact size being 16
bits.
This patches switches to the alternative method softPromoteHalf.
This aims to keep the type in 16-bit format between every operation.
So we promote to float and immediately round for any arithmetic
operation. This should be closer to the IR semantics since we
are rounding after each operation and not accumulating extra
precision across multiple operations. X86 is the only other
target that enables this today. See https://reviews.llvm.org/D73749
I had to update getRegisterTypeForCallingConv to force f16 to
use f32 when the F extension is enabled. This way we can still
pass it in the lower bits of an FPR for ilp32f and lp64f ABIs.
The softPromoteHalf would otherwise always give i16 as the
argument type.
Reviewed By: asb, frasercrmck
Differential Revision: https://reviews.llvm.org/D99148
We need to splat the scalar separately and use .vv, but there is
no vmsgt(u).vv. So add isel patterns to select vmslt(u).vv with
swapped operands.
We also need to get VT to use for the splat from an operand rather
than the result since the result VT is nxvXi1.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D99704
There's no target independent ISD opcode for MULHSU, so custom
legalize 2*XLen multiplies ourselves. We have to be a little
careful to prefer MULHU or MULHSU.
I thought about doing this in isel by pattern matching the
(add (mul X, (srai Y, XLen-1)), (mulhu X, Y)) pattern. I decided
against this because the add might become part of a chain of adds.
I don't trust DAG combine not to reassociate with other adds making
it difficult to find both pieces again.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D99479
This adds a new integer materialization strategy mainly targeted
at 64-bit constants like 0xffffffff where there are 32 or more trailing
ones with leading zeros. We can materialize these by using an addi -1
and srli to restore the leading zeros. This matches what gcc does.
I haven't limited to just these cases though. The implementation
here takes the constant, shifts out all the leading zeros and
shifts ones into the LSBs, creates the new sequence, adds an srli,
and checks if this is shorter than our original strategy.
I've separated the recursive portion into a standalone function
so I could append the new strategy outside of the recursion. Since
external users are no longer using the recursive function, I've
cleaned up the external interface to return the sequence instead of
taking a vector by reference.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D98821
Our CLZW isel pattern is quite easily broken by surrounding code
preventing it from matching sometimes. This usually results in
failing to remove the and X, 0xffffffff inserted by type
legalization. The add with -32 that type legalization also inserts
will often gets combined into other add/sub nodes. That doesn't
usually result in extra code when we don't use clzw.
CTTZ seems to be less fragile, but I wanted to keep it consistent
with CTLZ.
Reviewed By: asb, HsiangKai
Differential Revision: https://reviews.llvm.org/D99317
Also modify the simm5_plus1 check because Imm-1 is UB if Imm happens
to be INT64_MIN. I don't think the compiler would optimize based on that in this
usage, but it could fail UBSan or -ftrapv.
Reviewed By: HsiangKai, frasercrmck
Differential Revision: https://reviews.llvm.org/D99637
This adds almost everything required for supporting the new stepvector
intrinsic on RVV. It is lowered to the existing VID_VL SDNode.
The only exception is a limitation that RV32 cannot yet lower the
intrinsic on i64 vectors. This is because the step operand is
(currently) required to be at least as large as the vector element type.
I will look into patching that out and loosening the requirement to only
an integer pointer type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99594
We only use this in Pat patterns, so it just needs to be an
ImmLeaf. If we did need it as an instruction operand, the
ParserMatchClass, EncoderMethod, and DecoderMethod were probably wrong.
Without Zfh the half type isn't legal, but it could still be
used as an argument/return in IR. Clang will not generate this today.
Previously we promoted the half value to float for arguments and
returns if the F extension is enabled but Zfh isn't. Then depending on
which ABI is enabled we would pass it in either an FPR or a GPR in
float format.
If the F extension isn't enabled, it would get passed in the lower
16 bits of a GPR in half format.
With this patch the value will always in half format and will be
in the lower bits of a GPR or FPR. This should be consistent
with where the bits are located when Zfh is enabled.
I've based this implementation off of how this is done on ARM.
I've manually nan-boxed the value to 32 bits using integer ops.
It looks like flw, fsw, fmv.s, fmv.w.x, fmf.x.w won't
canonicalize nans so should leave the value alone. I think those
are the instructions that could get used on this value.
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D98670
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
This matches what we do in our isel patterns. In our internal
testing we've found this is needed to make the fast register
allocator happy at -O0. Otherwise it may assign V0 to an earlier
operand and find itself with no registers left when it reaches
the mask operand. By using V0 explicitly, the fast register allocator
will see it when it checks for phys register usages before it
starts allocating vregs. I'll try to update this with a test case.
Unfortunately, this does appear to prevent some instruction reordering
by the pre-RA scheduler which leads to the increased spills seen in
some tests. I suspect that problem could already occur for other
instructions that already used V0 directly.
There's a lot of repeated code here that could do with some
wrapper functions. Not sure if that should be at the level of the
new code that deals with V0. That would require multiple output
parameters to pass the glue, chain and register back. Maybe it
should be at a higher level over the entire set of push_backs.
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D99367
In D97111 we changed the RVV frame layout when using sp or bp to address
the stack slots so we could address the emergency stack slot. The idea
is to put the RVV objects as far as possible (in offset terms) from the
frame reference register (sp / fp / bp).
When using fp this happens naturally because the RVV objects are already
the top of the stack and due to the constraints of RVV (VLENB being a
power of two >= 128) the stack remains aligned. The rest of this summary
does not apply to this case.
When using sp / bp we need to skip the non-RVV stack slots. The size of
the the non-RVV objects is computed subtracting the callee saved
register size (whose computation is added in D97111 itself) to the total
size of the stack (which does not account for RVV stack slots). However,
when doing so we round to 16 bytes when computing that size and we end
emitting a smaller offset that may belong to a scalar stack slot (see
D98801). So this change removes that rounding.
Also, because we want the RVV objects be between the non-RVV stack slots
and the callee-saved register slots, we need to make sure the RVV
objects are properly aligned to 8 bytes. Adding a padding of 8 would
render the stack unaligned. So when allocating space for RVV (only when
we don't use fp) we need to have extra padding that preserves the stack
alignment. This way we can round to 8 bytes the offset that skips the
non-RVV objects and we do not misalign the whole stack in the way. In
some circumstances this means that the RVV objects may have padding
before (=lower offsets from sp/bp) and after (before the CSR stack
slots).
Differential Revision: https://reviews.llvm.org/D98802
We have a special pattern for
(mul (and X, 0xffffffff), (and Y, 0xffffffff)), to optimize the
ANDs to shift. But if a sext_inreg coms first, we'll form a MULW
and limit the effectiveness of the special match. So this patch
adds a larger pattern to suppress the MULW formation by emitting
a sext.w and then the same output we use for the
(mul (and X, 0xffffffff), (and Y, 0xffffffff)). This should all
get CSEd.
This is the issue I was trying to fix with D99029, but that affected
many more tests.
It's unlikely that FMADD and FMSUB would have different scheduling
information so merge them.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D99140
I've used IALU for the simplest operations from Zbb:
min, minu, max, maxu, sext.b, sext.h, zext.h, andn, orn, xnor
I've put add.uw in IALU32 and slli.uw in ShiftImm32.
Remaining instructions have received new classes.
All 3 sh*add are grouped together. sh*add.uw are grouped together.
Rotate left and right are together. Everything else got their own
class containing one instruction.
I think what I have here is the minimum granularity we need. I
could be convinced that we need more classes.
Reviewed By: evandro
Differential Revision: https://reviews.llvm.org/D99040
Add the constraint when destination EEW not equals the source EEW for
correctness.
The RVV spec has three register overlap rules and I implement the first
stricter constraint because the others are difficult to enforce.
Reviewed By: frasercrmck, craig.topper
Differential Revision: https://reviews.llvm.org/D98920
getMinRVVVectorSizeInBits() asserts if the V extension isn't
enabled. So check that gather/scatter is legal first since it
already contains a check for V extension being enabled. It
also already checks getMinRVVVectorSizeInBits for fixed length
vectors so we don't need a check in getGatherScatterOpCost.
We look for this pattern frequently in isel patterns so its a
good idea to try to preserve it.
This also let's us remove our special isel handling for srliw
and use a direct pattern match of (srl (and X, 0xffffffff), C)
since no bits will be removed from the and mask.
Differential Revision: https://reviews.llvm.org/D99042
This patch adds a small optimization for vector shuffle lowering,
detecting shuffles which can be re-expressed as vector selects.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99270
This patch adds further optimization techniques to RVV BUILD_VECTOR
lowering. It teaches the compiler to find splats of larger vector
element types "hidden" in smaller ones. For example, a v4i8 build_vector
(0x1, 0x2, 0x1, 0x2) could be splat as v2i16 0x0201. This is generally
more optimal than the dominant-element BUILD_VECTORs and so takes
priority.
This optimization is currently limited to all-constant-or-undef
BUILD_VECTORs as those were found to be the most common. There's no
reason this couldn't be extended to other BUILD_VECTORs, but the
additional bit-manipulation instructions may require more sophisticated
heuristics.
There are some cases where the materialization of the larger constant
takes more scalar instructions than it does to build the vector with
vector instructions. We could add heuristics to try and catch this.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99195
This will tell loop idiom recognize that it can make popcount loops countable
using the ctpop intrinsic. I didn't bother checking for illegal types.
Type legalization knows how to split a ctpop into multiple ctops added together.
Assuming we only receive reasonable integer bit widths, a few cpop instructions
added together is probably better than the loop.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D99203
This patch changes the interface to take a RegisterKind, to indicate
whether the register bitwidth of a scalar register, fixed-width vector
register, or scalable vector register must be returned.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98874
Copysign from double and to double patterns have lack of HasStdExtD predicate.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99234
Previously we used selectImm for RV64 and isel patterns for
RV32. This should be NFC, but will allow RV32 and RV64 to share
improvements in the future. For example, it might be useful to
use BSETI from Zbs to make single bit constants.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98877
This patch builds upon the initial BUILD_VECTOR work introduced in
D98700. It further optimizes the lowering of BUILD_VECTOR by using
VSELECT operations to effectively insert repeated elements into the
vector with relatively few instructions. This allows us to optimize more
BUILD_VECTORs without significantly increasing the size of the generated
code.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98969
This patch adds an optimization for mask-vector BUILD_VECTOR nodes whose
elements are all constants or undef. It lowers such operations by
building up the vector via a series of integer operations, in which
multiple mask elements are inserted into a vector at a time via
i8/i16/i32/i64 element types. The final result is then bitcast from that
integer vector.
We restrict this optimization in certain circumstances when optimizing
for size. If we are required to use more than one integer insert
operation, then it will likely increase code size compared with using a
load from a constant pool.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98860
It doesn't look like any instructions have ever been assigned to these classes.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D99050
I've split the gather/scatter custom handler to avoid complicating
it with even more differences between gather/scatter.
Tests are the scalable vector tests with the vscale removed and
dropped the tests that used vector.insert. We're probably not
as thorough on the splitting cases since we use 128 for VLEN here
but scalable vector use a known min size of 64.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98991
The reason for generating mv a0, a0 instruction is when the stack object offset is large then int<12>. To deal this situation, in the elimintateFrameIndex function, it will
create a virtual register, which needs the register scavenger to scavenge it. If the machine instruction that contains the stack object and the opcode is ADDI(the addi
was generated by frameindexNode), and then this instruction's destination register was the same as the register that was generated by the register scavenger, then the
mv a0, a0 was generated. So to eliminnate this instruction, in the eliminateFrameIndex function, if the instrution opcode is ADDI, then the virtual register can't be created.
Differential Revision: https://reviews.llvm.org/D92479
This optimization is trying to save SRLI instructions needed to
implement the ANDs. If we have zext.w we won't save anything.
Because we don't check that the multiply is the only user of the
AND we might even increase instruction count.
This patterns computes the full 64 bit product of a 32x32 unsigned
multiply. This requires a two pairs of SLLI+SRLI to zero the
upper 32 bits of the inputs.
We can do better than this by using two SLLI to move the lower
bits to the upper bits then use MULHU to compute the product. This
is the high half of a full 64x64 product. Since we put 32 0s in the lower
bits of the inputs we know the 128-bit product will have zeros in the
lower 64 bits. So the upper 64 bits, which MULHU computes, will contain
the original 64 bit product we were after.
The same trick would work for (mul (sext_inreg X, i32), (sext_inreg Y, i32))
using MULHS, but sext_inreg is sext.w which is already one instruction so we
wouldn't save anything.
Differential Revision: https://reviews.llvm.org/D99026
Previously only immediate shifts were in WriteShift. Register
shifts were grouped with IALU. Seems likely that immediate shifts
would be as fast or faster than register shifts. And that immediate
shifts wouldn't be any faster than IALU. So if any deserved to be in
their own group it should be register shifts not immediate shifts.
Rather than try to flip them let's just add more granularity
and give each kind their own class. I've used new names for both to
make them unambiguous and to force any downstream implementations to
be forced to put correct information in their scheduler models.
Reviewed By: evandro
Differential Revision: https://reviews.llvm.org/D98911
Found by adding asserts to LegalizeDAG to catch incorrect result
types being returned.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98964
I'm not sure how I failed to notice this before, but when optimizing
dominant-element BUILD_VECTORs we would lower via the scalable container type,
which lost us the information about the fixed length of the vector types. By
lowering via the fixed-length type we can preserve that information and
eliminate redundant vsetvli instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98938
Returning the scalable-vector container type would present problems when
the fixed-length INSERT_VECTOR_ELT was used by later operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98776
For Zvlsseg, we create several tuple register classes. When spilling for
these tuple register classes, we need to iterate NF times to load/store
these tuple registers.
Differential Revision: https://reviews.llvm.org/D98629
We returned the input chain instead of the output chain from the
new load. This bypasses the load in the chain. I haven't found a
good way to test this yet. IR order prevents my initial attempts
at causing reordering.
This patch adds support for masked scatter intrinsics on scalable vector
types. It is mostly an extension of the earlier masked gather support
introduced in D96263, since the addressing mode legalization is the
same.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96486
This patch supports the masked gather intrinsics in RVV.
The RVV indexed load/store instructions only support the "unsigned unscaled"
addressing mode; indices are implicitly zero-extended or truncated to XLEN and
are treated as byte offsets. This ISA supports the intrinsics directly, but not
the majority of various forms of the MGATHER SDNode that LLVM combines to. Any
signed or scaled indexing is extended to the XLEN value type and scaled
accordingly. This is done during DAG combining as widening the index types to
XLEN may produce illegal vectors that require splitting, e.g.
nxv16i8->nxv16i64.
Support for scalable-vector CONCAT_VECTORS was added to avoid spilling via the
stack when lowering split legalized index operands.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96263
Without this patch, bitcasts of fixed-length mask vectors would go
through the stack.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98779
This patch changes the operand order of masked vmslt[u]
from (mask, rs1, scalar, maskedoff, vl)
to (maskedoff, rs1, scalar, mask, vl).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98839
This patch adds an optimization path for BUILD_VECTOR nodes where the
majority of the elements are identical. These can be splatted, with the
remaining elements patched up with INSERT_VECTOR_ELTs. The threshold can
be tweaked as required - it is currently conservative. Undef elements
are disregarded when judging the dominance of a particular element. This
allows them to be covered by the splat value.
In addition, vectors of 2 elements are always optimized to a splat (for
the upper element) and an insert at element zero.
This optimization is disabled when optimizing for size.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98700
The InstrEmitter can sometimes insert a copy after an IMPLICIT_DEF
before connecting it to the vector instruction. This occurs when
constrainRegClass reduces to a class with less than 4 registers.
I believe LMUL8 on masked instructions triggers this since the
result can only use the v8, v16, or v24 register group as the mask
is using v0.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98567
The default promotion uses zero extends that become shifts. We
cam use sign extend instead which is better for RISCV.
I've used two different implementations based on whether we
have minu/maxu instructions.
Differential Revision: https://reviews.llvm.org/D98683
This allows me to introduce similar combines for branches as
we have recently added for SELECT_CC. Some of them are less
useful for standalone setccs and only help branch instructions.
By having a BR_CC node its easier to only affect branches.
I'm using CondCodeSDNode to make isel patterns easier to
write so we can refer to the codes by name. SELECT_CC uses a
constant instead.
I've translated the condition code just like SELECT_CC so
we need less patterns for the swapped conditions. This
includes special cases for X < 1 and X > -1 that get translated
to blez and bgez by using a 0 constant.
computeKnownBitsForTargetNode support for SELECT_CC is added
to allow MaskedValueIsZero to work for cases where the true
and false values of the SELECT_CC are setccs and the
result of the SELECT_CC is used by a BR_CC. This was needed
to avoid regressions in some of the overflow tests.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98159
The following code-sequence showed up in a testcase (isolated from
SPEC2017) for if-conversion and vectorization when searching for the
maximum in an array:
addi a2, zero, 1
blt a1, a2, .LBB0_5
which can be expressed as `bge zero,a1,.LBB0_5`/`blez a1,/LBB0_5`.
More generally, we want to express (a < 1) as (a <= 0).
This adds the required isel-pattern and updates the testcases.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98449
The default legalization uses zero extends that require pair of shifts
on RISCV. Instead we can take advantage of the fact that unsigned
compares work equally well on sign extended inputs. This allows
us to use addw/subw and sext.w.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98233
This patch adds fixed-length vector support to the calling convention
when RVV is used to lower fixed-length vectors. The scheme follows the
regular vector calling convention for the argument/return registers, but
uses scalable vector container types as the LocVTs, and converts to/from
the fixed-length vector value types as required.
Fixed-length vector types may be split when the combination of minimum
VLEN and the maximum allowable LMUL is not large enough to fully contain
the vector. In this case the behaviour differs between fixed-length
vectors passed as parameters and as return values:
1. For return values, vectors must be passed entirely via registers or
via the stack.
2. For parameters, unlike scalar values, split vectors continue to be
passed by value, and are split across multiple registers until there are
no remaining registers. Thus vector parameters may be found partly in
registers and partly on the stack.
As with scalable vectors, the first fixed-length mask vector is passed
via v0. Split mask fixed-length vectors are passed first via v0 and then
via the next available vector register: v8,v9,etc.
The handling of vector return values uses all available argument
registers v8-v23 which does not adhere to the calling convention we're
supposedly implementing, but since this issue affects both fixed-length
and scalable-vector values, it was left as-is.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97954
Types of fractional LMUL and LMUL=1 are all using VR register class. When
using inline asm, it will use the first type in the register class as the
type for the register. It is not necessary the same as the value type. We
need to use INSERT_SUBVECTOR/EXTRACT_SUBVECToR/BITCAST to make it legal
to put the value in the corresponding register class.
Differential Revision: https://reviews.llvm.org/D97480
I encountered a project that uses llvm that passes "generic" by
default. While I could fix that project, I wouldn't be surprised
if other projects did something similar. So it seems like
a good idea to provide a better error here.
I've also added validation of the 64Bit feature against the
triple so that we can catch a mismatched CPU before failing in
a mysterious way. We can make it pretty far in isel because we
calculate XLenVT from the triple and use that to set up the legal
integer type.
Reviewed By: luismarques, khchen
Differential Revision: https://reviews.llvm.org/D98307
This patch change the rvv frame layout that proposed in D94465. In patch D94465, In the eliminateFrameIndex function,
to eliminate the rvv frame index, create temp virtual register is needed. This virtual register should be scavenged by class
RegsiterScavenger. If the machine function has other unused registers, there is no problem. But if there isn't unused registers,
we need a emergency spill slot. Because of the emergency spill slot belongs to the scalar local variables field, to access emergency
spill slot, we need a temp virtual register again. This makes the compiler report the "Incomplete scavenging after 2nd pass" error.
So I change the rvv frame layout as follows:
```
|--------------------------------------|
| arguments passed on the stack |
|--------------------------------------|<--- fp
| callee saved registers |
|--------------------------------------|
| rvv vector objects(local variables |
| and outgoing arguments |
|--------------------------------------|
| realignment field |
|--------------------------------------|
| scalar local variable(also contains|
| emergency spill slot) |
|--------------------------------------|<--- bp
| variable-sized local variables |
|--------------------------------------|<--- sp
```
Differential Revision: https://reviews.llvm.org/D97111
This patch optimizes the codegen for INSERT_VECTOR_ELT in various ways.
Primarily, it removes the use of vslidedown during lowering, and the
vector element is inserted entirely using vslideup with a custom VL and
slide index.
Additionally, lowering of i64-element vectors on RV32 has been optimized
in several ways. When the 64-bit value to insert is the same as the
sign-extension of the lower 32-bits, the codegen can follow the regular
path. When this is not possible, a new sequence of two i32 vslide1up
instructions is used to get the vector element into a vector. This
sequence was suggested by @craig.topper. From there, the value is slid
into the final position for more consistent lowering across RV32 and
RV64.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98250
We don't support any other shuffles currently.
This changes the bswap/bitreverse tests that check for this in
their expansion code. Previously we expanded a byte swapping
shuffle through memory. Now we're scalarizing and doing bit
operations on scalars to swap bytes.
In the future we can probably use vrgather.vx to do a byte swap
shuffle.
This uses a really simple approach of converting to an i8 vector
and extracting. This is probably not the best approach especially
if you know the index is constant.
Other ideas:
-Store to stack temporary using vse1, load as scalar and shift.
-Sort of bitcast the vector to a vector of i8, slide down the
appropriate 8 bit element, copy to scalar, shift down the
correct bit within the 8 bits we extracted. Not exactly sure
how to describe such a bitcast from i1 vector to i8 vector
within the type system for elements less than 8.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98310
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
Currently we crash in type legalization any time an intrinsic
uses a scalar i64 on RV32.
This patch adds support for type legalizing this to prevent
crashing. I don't promise that it uses the best possible codegen
just that it is functional.
This first version handles 3 cases. vmv.v.x intrinsic, vmv.s.x
intrinsic and intrinsics that take a scalar input, splat it and
then do some operation.
For vmv.v.x we'll either rely on hardware sign extension for
constants or we'll convert it to multiple splats and bit
manipulation.
For vmv.s.x we use a really unoptimal sequence inspired by what
we do for an INSERT_VECTOR_ELT.
For the third case we'll either try to use the .vi form for
constants or convert to a complicated splat and bitmanip and use
the .vv form of the operation.
I've renamed the ExtendOperand field to SplatOperand now use it
specifically for the third case. The first two cases are handled
by custom lowering specifically for those intrinsics.
I haven't updated all tests yet, but I tried to cover a subset
that includes single-width, widening, and narrowing.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97895
The type legalizer will visit the result before the operands. To
avoid creating an illegal target specific node or falling back to
scalarization, we need to manually split vector operands.
This still doesn't handle the case of non-power of 2 operands
which need to be widened. I'm not sure the type legalizer is
ready for it. I think we would need to insert an
INSERT_SUBVECTOR with the power of 2 type we want, with an undef
first operand, and the non-power of 2 orignal operand as the vector
to insert. Then fill in the neutral elements into the elements the
padded elements. Alternatively we INSERT_SUBVECTOR into a neutral vector.
From there we carry on splitting if needed to get to a legal type
then do the target specific code.
The problem with this is the type legalizer doesn't know how to
widen an insert_subvector yet. We would need to add that including
the handling for a non-undef first vector.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98292
I've left mask registers to a future patch as we'll need
to convert them to full vectors, shuffle, and then truncate.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97609
I've included tests that require type legalization to split the
vector. The i64 version of these scalarizes on RV32 due to type
legalization visiting the result before the vector type. So we
have to abort our custom expansion to avoid creating target
specific nodes with an illegal type. Then type legalization ends
up scalarizing. We might be able to fix this by doing custom
splitting for large vectors in our handler to get down to a legal
type.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98102
Previously we set the value to -1, but the SEW information could
be useful for scheduling.
Reviewed By: frasercrmck, rogfer01
Differential Revision: https://reviews.llvm.org/D98062
The default fixed vector expansion uses sra+xor+add since it can't
see that smax is legal due to our custom handling. So we select
smax(X, sub(0, X)) manually.
Scalable vectors are able to use the smax expansion automatically
for most cases. It crashes in one case because getConstant can't build a
SPLAT_VECTOR for nxvXi64 when i64 scalars aren't legal. So
we manually emit a SPLAT_VECTOR_I64 for that case.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97991
As far as I know we're not enforcing the StdExtM must be enabled
to use the V extension. If we use an assert here and hit this
code in a release build we'll silently emit an invalid instruction.
By using a diagnostic we report the error to the user in release
builds. I think there may still be a later fatal error from
the code emitter though.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97970
The three bit nf is one less than the number of NFIELDS,
so we manually decrement 1 for VS1/2/4/8R & VL1/2/4/8R.
Reviewed By: craig.topper
Differential revision: https://reviews.llvm.org/D98185
While working on adding fixed-length vectors to the calling convention,
it was necessary to be able to query for a fixed-length vector container
type without access to an instance of SelectionDAG.
This patch modifies the "main" getContainerForFixedLengthVector function
to use an instance of TargetLowering rather than SelectionDAG, and
preserves the SelectionDAG overload as a wrapper.
An additional non-static version of the function was also added to
simplify the common case in RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97925
A setcc can be created during LegalizeDAG after select_cc has been
created. This combine will enable us to fold these late setccs.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98132
This pattern occurs when lowering for overflow operations
introduce an xor after select_cc has already been formed.
I had to rework another combine that looked for select_cc of an xor
with 1. That xor will now get combined away so we just need to
look for the RHS of the select_cc being 1.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98130
By implementing the method "unsigned RISCVTTIImpl::getRegisterBitWidth(bool Vector)",
fixed-length vectorization is enabled when possible. Without this method, the
"#pragma clang loop" directive is needed to enable vectorization(or the cost model
may inform LLVM that "Vectorization is possible but not beneficial").
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97549
This patch addresses a compiler crash resulting from passing a
fixed-length type to one that expects scalable vector types. An
assertion was added to prevent this regressing in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97868
This patch fixes up one case where the fixed-length-vector VL was
dropped (falling back to VLMAX) when inserting vector elements, as the
code would lower via ISD::INSERT_VECTOR_ELT (at index 0) which loses the
fixed-length vector information.
To this end, a custom node, VMV_S_XF_VL, was introduced to carry the VL
operand through to the final instruction. This node wraps the RVV
vmv.s.x and vmv.s.f instructions, which were being selected by
insert_vector_elt anyway.
There should be no observable difference in scalable-vector codegen.
There is still one outstanding drop from fixed-length VL to VLMAX, when
an i64 element is inserted into a vector on RV32; the splat (which is
custom legalized) has no notion of the original fixed-length vector
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97842
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
This patch enables support for lowering INSERT_VECTOR_ELT on
fixed-length vector types. The strategy follows that for scalable vector
types.
This patch also includes a quick fix to prevent the compiler infinitely
looping between lowering BUILD_VECTOR as VECTOR_SHUFFLE and back again.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97698
The default expansion of CONCAT_VECTORS goes through the stack. This
patch avoids that penalty by custom-lowering CONCAT_VECTORS to a series
of INSERT_SUBVECTOR nodes. Futher optimizations are possible, but this
is a good start.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97692
Like with EXTRACT_SUBVECTOR, INSERT_SUBVECTOR poses a problem
for vector masks as RVV isn't able to slide mask types around. We choose
instead to bitcast to equivalently-sized i8 types where we can, else we
zero-extend, perform the operation, and truncate back down.
One test was left disabled due to a crash in the legalizer.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97559
This patch fixes a bug where the lowering for INSERT_SUBVECTOR and
EXTRACT_SUBVECTOR would insist on first extracting a register-aligned
LMUL1 vector type before perfoming the slide up/down. This was even if
the vector was a fractional LMUL type, in which case the aligned
EXTRACT_SUBVECTOR was invalid.
This issue only occurred for scalable vector types, but a variety of
tests for both scalable and fixed-length vectors have been added to
ensure this does not regress in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97556
This patch unifies the two disparate paths for lowering INSERT_SUBVECTOR
operations under one roof. Consequently, with this patch it is possible to
support any fixed-length subvector insertion, not just "cast-like" ones.
As before, support for the insertion of mask vectors will come in a
separate patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97543
This patch adds support for extracting subvectors from vector masks.
This can be either extracting a scalable vector from another, or a fixed-length
vector from a fixed-length or scalable vector.
Since RVV lacks a way to slide vector masks down on an element-wise
basis and we don't know the true length of the vector registers, in many
cases we must resort to using equivalently-sized i8 vectors to perform
the operation. When this is not possible we fall back and extend to a
suitable i8 vector.
Support was also added for fixed-length truncation to mask types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97475
If a global object is listed in `@llvm.used`, place it in a unique section with
the `SHF_GNU_RETAIN` flag. The section is a GC root under `ld --gc-sections`
with LLD>=13 or GNU ld>=2.36.
For front ends which do not expect to see multiple sections of the same name,
consider emitting `@llvm.compiler.used` instead of `@llvm.used`.
SHF_GNU_RETAIN is restricted to ELFOSABI_GNU and ELFOSABI_FREEBSD in
binutils. We don't do the restriction - see the rationale in D95749.
The integrated assembler has supported SHF_GNU_RETAIN since D95730.
GNU as>=2.36 supports section flag 'R'.
We don't need to worry about GNU ld support because older GNU ld just ignores
the unknown SHF_GNU_RETAIN.
With this change, `__attribute__((retain))` functions/variables emitted
by clang will get the SHF_GNU_RETAIN flag.
Differential Revision: https://reviews.llvm.org/D97448
This will allow FrameIndex as the base address instead of
emitting a separate ADDI from isel. eliminateFrameIndex will likely turn
it back into an ADDI, but this makes things consistent with the
SDPatterns and VLPatterns.
I only tested one case for simplicity. I can test more if reviewers
want.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97221
This patch extends the support for scalable-vector int->fp and fp->int
conversions by additionally handling fixed-length vectors.
The existing scalable-vector lowering re-expresses widening/narrowing by
x4+ conversions as standard nodes. The fixed-length vector support slots
in at "the end" of this process by lowering the now equally-sized and
widening/narrowing by x2 nodes to our custom VL versions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97374
This patch extends the support for vector FP_ROUND and FP_EXTEND by
including support for fixed-length vector types. Since fixed-length
vectors use "VL" nodes and scalable vectors can use the standard nodes,
there is slightly more to do in the fixed-length case. A helper function
was introduced to try and reduce the divergent paths. It is expected
that this function will similarly come in useful for lowering the
int-to-fp and fp-to-int operations for fixed-length vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97301
This patch extends support for our custom-lowering of scalable-vector
truncates to include those of fixed-length vectors. It does this by
co-opting the custom RISCVISD::TRUNCATE_VECTOR node and adding mask and
VL operands. This avoids unnecessary duplication of patterns and
inflation of the ISel table.
Some truncates go through CONCAT_VECTORS which currently isn't
efficiently handled, as it goes through the stack. This can be improved
upon in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97202
This patch adds support for the custom lowering sign- and zero-extension
of fixed-length vector types. It does so through custom nodes. Since the
source and destination types are (necessarily) of different sizes, it is
possible that the source type is legal whilst the larger destination
type isn't. In this case the legalization makes heavy use of
EXTRACT_SUBVECTOR.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97194
This patch unifies the two disparate paths for lowering
EXTRACT_SUBVECTOR operations under one roof. Consequently, with this
patch it is possible to support any fixed-length subvector extraction,
not just "cast-like" ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97192
We always create the VL operand using a register, but if we can
determine that it came from an ADDI X0, imm with a sufficiently
small immediate, we can use VSETIVLI.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97332
We just started using a ComplexPattern for sexti32. This updates
zexti32 to match.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D97231
I've changed to use VL=1 for slidedown and shifts to avoid extra
element processing that we don't need.
The i64 fixed vector handling on i32 isn't great if the vector type
isn't legal due to an ordering issue in type legalization. If the
vector type isn't legal, we fall back to default legalization
which will bitcast the vector to vXi32 and use two independent extracts.
Doing better will require handling several different cases by
manually inserting insert_subvector/extract_subvector to adjust the type
to a legal vector before emitting custom nodes.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97319
This patch extends the support for RVV INSERT_SUBVECTOR to cover those
which don't align to a vector register boundary. Like the support for
EXTRACT_SUBVECTOR in D96959, it accomplishes this by extracting the
nearest register-sized subvector (a subregister operation), then sliding
the vector down with VSLIDEDOWN, inserting the subvector to the first
position, and sliding the vector back up again afterwards.
Unlike subvector extraction, for vectors that occupy less than a full
vector register we must preserve the untouched elements. We do this by
lowering to an LMUL=1 INSERT_SUBVECTOR using the above method and
lowering that to a VSLIDEUP with a zero offset. This uses a
tail-undisturbed policy and so has the effect of "sliding in" the
subvector elements while preserving the surrounding ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96972
An i64 AssertZExt from a type smaller than i32 has at least 33
leading zeros which mean it has at least 33 sign bits.
Since we have a couple patterns that use two sexti32, I've
switched to a ComplexPattern so tablegen didn't have to generate
9 different permutations.
As noted in the FIXME, maybe we should just call computeNumSignBits,
but we don't have tests that benefit from that yet.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D97130
This should fix the issue reported in D96972.
I don't have a good test case for this without those changes.
Differential Revision: https://reviews.llvm.org/D97082
A previous patch moved the index versions. This moves the rest.
I also removed the custom lowering for VLEFF since we can now
do everything directly in the isel handling.
I had to update getLMUL to handle mask registers to index the
pseudo table correctly for VLE1/VSE1.
This is good for another 15K reduction in llc size.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97097
This also removes a pattern from RISCV that is no longer needed
since the sexti32 on the LHS of the srem in the pattern implies
the result is sign extended so the sign_extend_inreg should be
removed in DAG combine now.
Reviewed By: luismarques, RKSimon
Differential Revision: https://reviews.llvm.org/D97133
This patch extends the support for RVV EXTRACT_SUBVECTOR to cover those
which don't align to a vector register boundary. It accomplishes this by
extracting the nearest register-sized subvector (a subregister
operation), then sliding the vector down with VSLIDEDOWN and extracting
the subvector from the first position (a COPY operation).
Since this procedure involves the use of VSCALE and multiplication, the
handling of such operations is done during lowering to simplify the
implementation and make use of DAG combining. This necessitated moving
some helper functions from RISCVISelDAGToDAG to RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96959
With vector mask registers only allocatable to V0 (VMV0Regs) it is
relatively simple to generate code which uses multiple masks and naively
requires spilling.
This patch aims to improve codegen in such cases by telling LLVM it can
use VRRegs to hold masks. This will prevent spilling in many cases by
having LLVM copy to an available VR register.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97055
We don't currently create memory operands for these intrinsics,
but there was a suggestion of using the indexed load/store
intrinsics to implement isel for scalable vector gather/scatter.
That may propagate the memory operand from the gather/scatter
ISD nodes.
We had more combinations of data and index lmuls than we needed.
Also add some asserts to verify that the IndexVT and data VT have
the same element count when we isel these pseudo instructions.
There are many legal combinations of index and data VTs supported
for these intrinsics. This results in a lot of isel patterns in
RISCVGenDAGISel.inc.
By adding a separate table similar to what we use for segment
load/stores, we can more efficiently manually select these
intrinsics. We should also be able to reuse this table scalable
vector gather/scatter.
This reduces the llc binary size by ~56K.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D97033
Just like we do for isel patterns, we need to call selectVLOp
to prevent 0 from being selected to X0 by the default isel.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97021
We previously used isel patterns for this, but that used quite
a bit of space in the isel table due to OR being associative
and commutative. It also wouldn't handle shifts/ands being in
reversed order.
This generalizes the shift/and matching from GREVI to
take the expected mask table as input so we can reuse it for
SHFLI.
There is no SHFLIW instruction, but we can promote a 32-bit
SHFLI to i64 on RV64. As long as bit 4 of the control bit isn't
set, a 64-bit SHFLI will preserve 33 sign bits if the input had
at least 33 sign bits. ComputeNumSignBits has been updated to
account for that to avoid sext.w in the tests.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96661
We were creating more combinations of value and index lmul than
we needed.
I've copied the loop structure used here from VPseudoAMOEI with
all data sew values instead of just 32/64.
Similar can be done for segment loads/store.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D97008
Intrinsic ID is a 32-bit value which made each row of the table 4
byte aligned. The remaining fields used 5 bytes. This meant 3 bytes
of padding per row.
This patch breaks the table into 4 separate tables and indexes them
by properties we know about the intrinsic. NF, masked,
strided, ordered, etc. The indexed load/store tables have no
padding in their rows now.
All together this reduces the size of llc binary by ~28K.
I'm considering adding similar tables for isel of non-segment
load/store as well to cut down the size of the isel table and
probably improve our isel performance. Those tables would need to
indexed from intrinsics, IR loads/stores, gathers/scatters, and
RISCVISD opcodes. So having a table that can be indexed without using
intrinsic ID is more flexible.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D96894
This table is queried in RISCVMCInstLower without knowing
whether the instruction is a vector pseudo. Due to the way the
binary search works, we have to do log2(tablesize) checks just
to determine a non-vector instruction isn't in the table.
Conveniently, all the vector pseudos are pretty tightly
packed within the internal instruction enum. By enabling the
PrimaryKeyEarlyOut, tablegen will emit a check against the
beginning and end of the table before doing the binary search.
This gives a quick early out on the search for the majority
of non-vector instructions.
Differential Revision: https://reviews.llvm.org/D97016
This avoids tedious repetition and matches what we do for the
ValueTypeByHwMode uses.
Reviewed By: craig.topper, luismarques
Differential Revision: https://reviews.llvm.org/D96649
This uses to division by constant optimization to use MULHU/MULHS.
Reviewed By: frasercrmck, arcbbb
Differential Revision: https://reviews.llvm.org/D96934
Due to vXi64 on RV32, I've directly emitted this using _VL ISD
opcodes. If it wasn't for that we could just use fixed vector
BUILD_VECTOR and VSELECT and let those each be legalized.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96910
These should be NOPs so we can just replace with the input. This
matches what SVE does with isel patterns for all permutations.
Custom isel saves us from having to list all permurations for
all LMULs.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96921
For masked segment load, the destination register should not overlap
with mask register. It could not be V0.
In the original implementation, there is no segment load/store register
class without V0. In this patch, I added these register classes and
modify `GetVRegNoV0` to get the correct one.
Differential Revision: https://reviews.llvm.org/D96937
This patch adds support for INSERT_SUBVECTOR and EXTRACT_SUBVECTOR
(nominally where both operands are scalable vector types) where the
vector, subvector, and index align sufficiently to allow decomposition
to subregister manipulation:
* For extracts, the extracted subvector must correctly align with the
lower elements of a vector register.
* For inserts, the inserted subvector must be at least one full vector
register, and correctly align as above.
This approach should work for fixed-length vector insertion/extraction
too, but that will come later.
Reviewed By: craig.topper, khchen, arcbbb
Differential Revision: https://reviews.llvm.org/D96873
The type legalizer can call this code based on the scalar type so
we need to verify the vector type is a scalable vector.
I think due to how type legalization visits nodes, the vector type
will have already been legalized so we don't have an issue with
using MVT here like we did for EXTRACT_VECTOR_ELT.
I've added a test just in case.
The type legalizer is calling this code based on the scalar type so
we need to verify the input type is a scalable vector.
The vector type has also not been legalized yet when this is called
so we need to use EVT for it.
A lot of the code for the masked and unmasked is the same. This
patch adds a boolean to handle the differences so we can share
the code.
Differential Revision: https://reviews.llvm.org/D96841
This patch adds support for fixed-length vector vselect. It does so by
lowering them to a custom unmasked VSELECT_VL node with a vector length
operand.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96768
This patch proposes how to deal with RISC-V vector frame objects. The
layout of RISC-V vector frame will look like
|---------------------------------|
| scalar callee-saved registers |
|---------------------------------|
| scalar local variables |
|---------------------------------|
| scalar outgoing arguments |
|---------------------------------|
| RVV local variables && |
| RVV outgoing arguments |
|---------------------------------| <- end of frame (sp)
If there is realignment or variable length array in the stack, we will use
frame pointer to access fixed objects and stack pointer to access
non-fixed objects.
|---------------------------------| <- frame pointer (fp)
| scalar callee-saved registers |
|---------------------------------|
| scalar local variables |
|---------------------------------|
| ///// realignment ///// |
|---------------------------------|
| scalar outgoing arguments |
|---------------------------------|
| RVV local variables && |
| RVV outgoing arguments |
|---------------------------------| <- end of frame (sp)
If there are both realignment and variable length array in the stack, we
will use frame pointer to access fixed objects and base pointer to access
non-fixed objects.
|---------------------------------| <- frame pointer (fp)
| scalar callee-saved registers |
|---------------------------------|
| scalar local variables |
|---------------------------------|
| ///// realignment ///// |
|---------------------------------| <- base pointer (bp)
| RVV local variables && |
| RVV outgoing arguments |
|---------------------------------|
| /////////////////////////////// |
| variable length array |
| /////////////////////////////// |
|---------------------------------| <- end of frame (sp)
| scalar outgoing arguments |
|---------------------------------|
In this version, we do not save the addresses of RVV objects in the
stack. We access them directly through the polynomial expression
(a x VLENB + b). We do not reserve frame pointer when there is any RVV
object in the stack. So, we also access the scalar frame objects through the
polynomial expression (a x VLENB + b) if the access across RVV stack
area.
Differential Revision: https://reviews.llvm.org/D94465
Non-splatted non-integer build_vector nodes were mistakenly being
lowered as VID expressions, which should not happen. VID can only be
used to select integer build_vector nodes.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96718
The patterns mostly follow the scalar counterparts, save for some extra
optimizations to match the vector/scalar forms.
The patch adds a DAGCombine for ISD::FCOPYSIGN to try and reorder
ISD::FNEG around any ISD::FP_EXTEND or ISD::FP_TRUNC of the second
operand. This helps us achieve better codegen to match vfsgnjn.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96028
This stops tablegen from generating patterns with the opposite type
in the opposite HwMode. This just adds wasted bytes to the isel table.
This reduces the isel table by about 1800 bytes.
This is annoying because the condition code legalization belongs
to LegalizeDAG, but our custom handler runs in Legalize vector ops
which occurs earlier.
This adds some of the mask binary operations so that we can combine
multiple compares that we need for expansion.
I've also fixed up RISCVISelDAGToDAG.cpp to handle copies of masks.
This patch contains a subset of the integer setcc patch as well.
That patch is dependent on the integer binary ops patch. I'll rebase
based on what order the patches go in.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96567
This patch prepares the RISCV VSLIDEUP and VSLIDEDOWN custom nodes to
ones carrying additional mask and vector-length operands. This is
primarily so they can be used by both systems.
This also takes the opportunity to create some helper functions to deal
with the common task of getting the default (unmasked) VL operands.
Reviewed By: craig.topper, arcbbb
Differential Revision: https://reviews.llvm.org/D96505
I believe I've covered all orderings of splat operands here. Better
canonicalization in lowering might help reduce this. I did not handle
the immediate adjustments needed for set(u)gt/set(u)lt.
Testing here is limited to byte types because the scalable vector
type used for masks for the store is calculated assuming 8 byte
elements. But for the setcc its based on the element count of the
container type for the setcc input. So they don't agree. We'll need
to enhanced D96352 to handle this I think.
Differential Revision: https://reviews.llvm.org/D96443
Unlike scalable vectors, I'm only using a ComplexPattern for
the immediate itself. The vmv_v_x is matched explicitly. We igore
the VL argument when matching a binary operator, but we do check
it when matching splat directly.
I left out tests for vXi64 as they fail on rv32 right now.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96365
Change parseVTypeI function to Make the added vset instruction test cases report more concrete error message.
Differential Revision: https://reviews.llvm.org/D96218
This patch extends the initial fixed-length vector support to include
smin, smax, umin, and umax.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96491
This patch handles cast-like insert_subvector & extract_subvector
in which case:
1. index starts from 0.
2. inserting a fixed-width vector into a scalable vector,
or extracting a fixed-width vector from a scalable vector.
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D96352
This refines how we determine which masks types are legal and adds
support for loads, stores, and all ones/zeros splats.
I left a fixme in store handling where I think we need to zero
extra bits if the type isn't a multiple of a byte. If I remember
right from X86 there was some case we could have a store of a
1, 2, or 4 bit mask and have a scalar zextload that then expected the
bits to be 0. Its tricky to zero the bits with RVV. We need to do
something like round VL up, zero a register, lower the VL back down,
then do a tail undisturbed move into the zero register. Another
option might be to generate a mask of 1/2/4 bits set with a VL of 8
and use that to mask off the bits.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96468
The test cases extract a fixed element from a vector and splat it
into a vector. This gets DAG combined into a splat shuffle.
I've used some very wide vectors in the test to make sure we have
at least a couple tests where the element doesn't fit into the
uimm5 immediate of vrgather.vi so we fall back to vrgather.vx.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96186
This patch optimizes a build_vector "index sequence" and lowers it to
the existing custom RISCVISD::VID node. This pattern is common in
autovectorized code.
The custom node was updated to allow it to be used by both scalable and
fixed-length vectors, thus avoiding pattern duplication.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96332
As of the current draft these are no longer being considered
for the bitmanip spec. It wasn't clear what sub extension they
belonged in in the 0.93 spec.
So remove them. They can always be added back if something changes.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96157
Commit a2d19bad07 introduced a
dependency in the RISCV disassembler on two additional libraries
(MC, RISCVDesc) which wasn't added to the CMakeLists.txt. This
causes shared library builds to break. This patch just adds them
to fix failures seen on some bots, such as the PPC64LE Multistage.
In vector v0.10, there are whole vector register load/store
instructions. I suggest to use the whole register load/store
instructions for generic load/store for scalable vector types. It could
save up vset{i}vl{i} for these load/store.
For fractional LMUL, I keep to use vle{eew}.v/vse{eew}.v instructions to
load/store partial vector registers.
Differential Revision: https://reviews.llvm.org/D95853
Define an option -riscv-vector-bits-max to specify the maximum vector
bits for vectorizer. Loop vectorizer will use the value to check if it
is safe to use the whole vector registers to vectorize the loop.
It is not the optimum solution for loop vectorizing for scalable vector.
It assumed the whole vector registers will be used to vectorize the code.
If it is possible, we should configure vl to do vectorize instead of
using whole vector registers.
We only consider LMUL = 1 in this patch.
This patch just an initial work for loop vectorizer for RISC-V Vector.
Differential Revision: https://reviews.llvm.org/D95659
Building on the fixed vector support from D95705
I've added ISD nodes for vmv.v.x and vfmv.v.f and switched to
lowering the intrinsics to it. This allows us to share the same
isel patterns for both.
This doesn't handle splats of i64 on RV32 yet. The build_vector
gets converted to a vXi32 build_vector+bitcast during type
legalization. Not sure the best way to handle this at the moment.
Differential Revision: https://reviews.llvm.org/D96108
Craig Topper