This patch implements a pass that optimizes condition branches on x86 by
taking advantage of the three-way conditional code generated by compare
instructions.
Currently, it tries to hoisting EQ and NE conditional branch to a dominant
conditional branch condition where the same EQ/NE conditional code is
computed. An example:
bb_0:
cmp %0, 19
jg bb_1
jmp bb_2
bb_1:
cmp %0, 40
jg bb_3
jmp bb_4
bb_4:
cmp %0, 20
je bb_5
jmp bb_6
Here we could combine the two compares in bb_0 and bb_4 and have the
following code:
bb_0:
cmp %0, 20
jg bb_1
jl bb_2
jmp bb_5
bb_1:
cmp %0, 40
jg bb_3
jmp bb_6
For the case of %0 == 20 (bb_5), we eliminate two jumps, and the control height
for bb_6 is also reduced. bb_4 is gone after the optimization.
This optimization is motivated by the branch pattern generated by the switch
lowering: we always have pivot-1 compare for the inner nodes and we do a pivot
compare again the leaf (like above pattern).
This pass currently is enabled on Intel's Sandybridge and later arches. Some
reviewers pointed out that on some arches (like AMD Jaguar), this pass may
increase branch density to the point where it hurts the performance of the
branch predictor.
Differential Revision: https://reviews.llvm.org/D46662
llvm-svn: 343993
Emit a waterfall loop in the general case for a potentially-divergent Rsrc
operand. When practical, avoid this by using Addr64 instructions.
Recommits r341413 with changes to update the MachineDominatorTree when present.
Differential Revision: https://reviews.llvm.org/D51742
llvm-svn: 343992
Some necessary yak shaving before lowering *_EXTEND_VECTOR_INREG 256-bit vectors on AVX1 targets as suggested by D52964.
Differential Revision: https://reviews.llvm.org/D52970
llvm-svn: 343991
In r339636 the alias analysis rules were changed with regards to tail calls
and byval arguments. Previously, tail calls were assumed not to alias
allocas from the current frame. This has been updated, to not assume this
for arguments with the byval attribute.
This patch aligns TailCallElim with the new rule. Tail marking can now be
more aggressive and mark more calls as tails, e.g.:
define void @test() {
%f = alloca %struct.foo
call void @bar(%struct.foo* byval %f)
ret void
}
define void @test2(%struct.foo* byval %f) {
call void @bar(%struct.foo* byval %f)
ret void
}
define void @test3(%struct.foo* byval %f) {
%agg.tmp = alloca %struct.foo
%0 = bitcast %struct.foo* %agg.tmp to i8*
%1 = bitcast %struct.foo* %f to i8*
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %0, i8* %1, i64 40, i1 false)
call void @bar(%struct.foo* byval %agg.tmp)
ret void
}
The problematic case where a byval parameter is captured by a call is still
handled correctly, and will not be marked as a tail (see PR7272).
llvm-svn: 343986
CFGPrinter (-view-cfg, -dot-cfg) invokes an undefined behaviour (dangling
pointer to rvalue) on IR files with branch weights. This patch fixes the
problem caused by Twine initialization and string conversion split into
two statements.
This change fixes the bug 37019. A similar patch to this problem was
provided in the llvmlite project
Patch by mcopik (Marcin Copik).
Differential Revision: https://reviews.llvm.org/D52933
llvm-svn: 343984
Summary:
The ISA is really supposed to support 64-bit atomics as well,
so the data type should be an overload.
Mesa doesn't use these atomics yet, in fact I noticed this
issue while trying to use the atomics from Mesa.
Change-Id: I77f58317a085a0d3eb933cc7e99308c48a19f83e
Reviewers: tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D52291
llvm-svn: 343978
This commit adds a new IR level pass to the AMDGPU backend to perform
atomic optimizations. It works by:
- Running through a function and finding atomicrmw add/sub or uses of
the atomic buffer intrinsics for add/sub.
- If all arguments except the value to be added/subtracted are uniform,
record the value to be optimized.
- Run through the atomic operations we can optimize and, depending on
whether the value is uniform/divergent use wavefront wide operations
(DPP in the divergent case) to calculate the total amount to be
atomically added/subtracted.
- Then let only a single lane of each wavefront perform the atomic
operation, reducing the total number of atomic operations in flight.
- Lastly we recombine the result from the single lane to each lane of
the wavefront, and calculate our individual lanes offset into the
final result.
Differential Revision: https://reviews.llvm.org/D51969
llvm-svn: 343973
This works on Windows, but seems to be breaking tests that
use an external shell (e.g. bash) because backquote has special
meaning.
This particular argument wasn't crucial for the test, so I've
just removed it.
llvm-svn: 343971
Summary:
If we have a symbol with (linkonce|weak)_odr linkage, we do not want
to dead strip it even it is not prevailing.
IR level (linkonce|weak)_odr symbol can become non-prevailing when we mix
ELF objects and IR objects where the (linkonce|weak)_odr symbol in the ELF
object is prevailing and the ones in the IR objects are not. Stripping
them will prevent us from doing optimizations with them.
By not dead stripping them, We will convert these symbols to
available_externally linkage as a result of non-prevailing and eventually
dropping them after inlining.
I modified cache-prevailing.ll to use linkonce linkage as it is
testing whether cache prevailing bit is effective or not, not
we should treat linkonce_odr alive or not
Reviewers: tejohnson, pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D52893
llvm-svn: 343970
When branch target identification is enabled, we can only do indirect
tail-calls through x16 or x17. This means that the outliner can't
transform a BLR instruction at the end of an outlined region into a BR.
Differential revision: https://reviews.llvm.org/D52869
llvm-svn: 343969
When branch target identification is enabled, all indirectly-callable
functions start with a BTI C instruction. this instruction can only be
the target of certain indirect branches (direct branches and
fall-through are not affected):
- A BLR instruction, in either a protected or unprotected page.
- A BR instruction in a protected page, using x16 or x17.
- A BR instruction in an unprotected page, using any register.
Without BTI, we can use any non call-preserved register to hold the
address for an indirect tail call. However, when BTI is enabled, then
the code being compiled might be loaded into a BTI-protected page, where
only x16 and x17 can be used for indirect tail calls.
Legacy code withiout this restriction can still indirectly tail-call
BTI-protected functions, because they will be loaded into an unprotected
page, so any register is allowed.
Differential revision: https://reviews.llvm.org/D52868
llvm-svn: 343968
The Branch Target Identification extension, introduced to AArch64 in
Armv8.5-A, adds the BTI instruction, which is used to mark valid targets
of indirect branches. When enabled, the processor will trap if an
instruction in a protected page tries to perform an indirect branch to
any instruction other than a BTI. The BTI instruction uses encodings
which were NOPs in earlier versions of the architecture, so BTI-enabled
code will still run on earlier hardware, just without the extra
protection.
There are 3 variants of the BTI instruction, which are valid targets for
different kinds or branches:
- BTI C can be targeted by call instructions, and is inteneded to be
used at function entry points. These are the BLR instruction, as well
as BR with x16 or x17. These BR instructions are allowed for use in
PLT entries, and we can also use them to allow indirect tail-calls.
- BTI J can be targeted by BR only, and is intended to be used by jump
tables.
- BTI JC acts ab both a BTI C and a BTI J instruction, and can be
targeted by any BLR or BR instruction.
Note that RET instructions are not restricted by branch target
identification, the reason for this is that return addresses can be
protected more effectively using return address signing. Direct branches
and calls are also unaffected, as it is assumed that an attacker cannot
modify executable pages (if they could, they wouldn't need to do a
ROP/JOP attack).
This patch adds a MachineFunctionPass which:
- Adds a BTI C at the start of every function which could be indirectly
called (either because it is address-taken, or externally visible so
could be address-taken in another translation unit).
- Adds a BTI J at the start of every basic block which could be
indirectly branched to. This could be either done by a jump table, or
by taking the address of the block (e.g. the using GCC label values
extension).
We only need to use BTI JC when a function is indirectly-callable, and
takes the address of the entry block. I've not been able to trigger this
from C or IR, but I've included a MIR test just in case.
Using BTI C at function entries relies on the fact that no other code in
BTI-protected pages uses indirect tail-calls, unless they use x16 or x17
to hold the address. I'll add that code-generation restriction as a
separate patch.
Differential revision: https://reviews.llvm.org/D52867
llvm-svn: 343967
Support G_UDIV/G_UREM/G_SREM. The instruction selection
code is taken from FastISel with only minor tweaks to adapt
for GlobalISel.
Differential Revision: https://reviews.llvm.org/D49781
llvm-svn: 343966
The following instruction:
> str q28, [x0, #1*6*4*@]
contains a @ which is parsed as an empty symbol. The parser returns true
but has no error, so the assembler continues by ignoring the
instruction.
Differential Revision: https://reviews.llvm.org/D52645
llvm-svn: 343961
When deciding if it is safe to optimize a conditional branch to a CBZ or
CBNZ the offsets of the BasicBlocks from the start of the function are
estimated. For inline assembly the generic getInlineAsmLength() function is
used to get a worst case estimate of the inline assembly by multiplying the
number of instructions by the max instruction size of 4 bytes. This
unfortunately doesn't take into account the generation of Thumb implicit IT
instructions. In edge cases such as when all the instructions in the block
are 4-bytes in size and there is an implicit IT then the size is
underestimated. This can cause an out of range CBZ or CBNZ to be generated.
The patch takes a conservative approach and assumes that every instruction
in the inline assembly block may have an implicit IT.
Fixes pr31805
Differential Revision: https://reviews.llvm.org/D52834
llvm-svn: 343960
The MachineOutliner for AArch64 transforms indirect calls into indirect
tail calls, replacing the call with the TCRETURNri pseudo-instruction.
This pseudo lowers to a BR, but has the isCall and isReturn flags set.
The problem is that TCRETURNri takes a tcGPR64 as the register argument,
to prevent indiret tail-calls from using caller-saved registers. The
indirect calls transformed by the outliner could use caller-saved
registers. This is fine, because the outliner ensures that the register
is available at all call sites. However, this causes a verifier failure
when the register is not in tcGPR64. The fix is to add a new
pseudo-instruction like TCRETURNri, but which accepts any GPR.
Differential revision: https://reviews.llvm.org/D52829
llvm-svn: 343959
The srli test in alu8.ll was a no-op, as it shifted by 8 bits. Fix this, and
also change the immediate in alu16.ll as shifted by something other than a
poewr of 8 is more interesting.
llvm-svn: 343958
Currently running the @insertelem_after_gep function below through the InstCombine pass with opt produces invalid IR.
Input:
```
define void @insertelem_after_gep(<16 x i32>* %t0) {
%t1 = bitcast <16 x i32>* %t0 to [16 x i32]*
%t2 = addrspacecast [16 x i32]* %t1 to [16 x i32] addrspace(3)*
%t3 = getelementptr inbounds [16 x i32], [16 x i32] addrspace(3)* %t2, i64 0, i64 0
%t4 = insertelement <16 x i32 addrspace(3)*> undef, i32 addrspace(3)* %t3, i32 0
call void @extern_vec_pointers_func(<16 x i32 addrspace(3)*> %t4)
ret void
}
```
Output:
```
define void @insertelem_after_gep(<16 x i32>* %t0) {
%t3 = getelementptr inbounds <16 x i32>, <16 x i32>* %t0, i64 0, i64 0
%t4 = insertelement <16 x i32 addrspace(3)*> undef, i32 addrspace(3)* %t3, i32 0
call void @my_extern_func(<16 x i32 addrspace(3)*> %t4)
ret void
}
```
Which although causes no complaints when produced, isn't valid IR as the insertelement use of the %t3 GEP expects an address space.
```
opt: /tmp/bad.ll:52:73: error: '%t3' defined with type 'i32*' but expected 'i32 addrspace(3)*'
%t4 = insertelement <16 x i32 addrspace(3)*> undef, i32 addrspace(3)* %t3, i32 0
```
I've fixed this by adding an addrspacecast after the GEP in the InstCombine pass, and including a check for this type mismatch to the verifier.
Reviewers: spatel, lebedev.ri
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52294
llvm-svn: 343956
At the point when we perform `emitTransformedIndex`, we have a broken IR (in
particular, we have Phis for which not every incoming value is properly set). On
such IR, it is illegal to create SCEV expressions, because their internal
simplification process may try to prove some predicates and break when it
stumbles across some broken IR.
The only purpose of using SCEV in this particular place is attempt to simplify
the generated code slightly. It seems that the result isn't worth it, because
some trivial cases (like addition of zero and multiplication by 1) can be
handled separately if needed, but more generally InstCombine is able to achieve
the goals we want to achieve by using SCEV.
This patch fixes a functional crash described in PR39160, and as side-effect it
also generates a bit smarter code in some simple cases. It also may cause some
optimality loss (i.e. we will now generate `mul` by power of `2` instead of
shift etc), but there is nothing what InstCombine could not handle later. In
case of dire need, we can support more trivial cases just in place.
Note that this patch only fixes one particular case of the general problem that
LV misuses SCEV, attempting to create SCEVs or prove predicates on invalid IR.
The general solution, however, seems complex enough.
Differential Revision: https://reviews.llvm.org/D52881
Reviewed By: fhahn, hsaito
llvm-svn: 343954
The Globals table is a hash table keyed on symbol name, so
it's possible to lookup symbols by name in O(1) time. Add
a function to the globals stream to do this, and add an option
to llvm-pdbutil to exercise this, then use it to write some
tests to verify correctness.
llvm-svn: 343951
This change is proposed as a part of D44548, but we
need this independently to avoid regressions from improved
undef propagation in SimplifyDemandedVectorElts().
llvm-svn: 343940
rL343913 was using SimplifyDemandedBits's original demanded mask instead of the adjusted 'NewMask' that accounts for multiple uses of the op (those variable names really need improving....).
Annoyingly many of the test changes (back to pre-rL343913 state) are actually safe - but only because their multiple uses are all by PMULDQ/PMULUDQ.
Thanks to Jan Vesely (@jvesely) for bisecting the bug.
llvm-svn: 343935
This patch fixes PR39099.
When strided loads are predicated, each of them will form an interleaved-group
(with gaps). However, subsequent stages of vectorization (planning and
transformation) assume that if a load is part of an Interleave-Group it is not
predicated, resulting in wrong code - unmasked wide loads are created.
The Interleaving Analysis does take care not to have conditional interleave
groups of size > 1, but until we extend the planning and transformation stages
to support masked-interleave-groups we should also avoid having them for
size == 1.
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D52682
llvm-svn: 343931
Prevents missing other simplifications that may occur deep in the operand chain where CommitTargetLoweringOpt won't add the PMULDQ back to the worklist itself
llvm-svn: 343922
Attempt to simplify PSHUFB masks (even non-constant ones) - we should probably be able to simplify other variable shuffles as well as the need arises.
llvm-svn: 343919
This patch enables SimplifyDemandedBits to call SimplifyDemandedVectorElts in cases where the demanded bits mask covers entire elements of a bitcasted source vector.
There are a couple of cases here where simplification at a deeper level (such as through bitcasts) prevents further simplification - CommitTargetLoweringOpt only adds immediate uses/users back to the worklist when we might want to combine the original caller again to see what else it can simplify.
As well as that I had to disable handling of bool vector until SimplifyDemandedVectorElts better supports some of their opcodes (SETCC, shifts etc.).
Fixes PR39178
Differential Revision: https://reviews.llvm.org/D52935
llvm-svn: 343913
A pattern was present for addi rd, x0, simm6 but not addiw which is
semantically identical when the source register is x0. This patch addresses
that, and the benefit can be seen in rv64c-aliases-valid.s.
llvm-svn: 343911
Summary:
The POSIX spec says:
```
If the −t option is used with the −v option, the standard output format shall be:
"%s %u/%u %u %s %d %d:%d %d %s\n", <member mode>, <user ID>,
<group ID>, <number of bytes in member>,
<abbreviated month>, <day-of-month>, <hour>,
<minute>, <year>, <file>
where:
...
<abbreviated month>
Equivalent to the format of the %b conversion specification format in date.
<day-of-month>
Equivalent to the format of the %e conversion specification format in date.
<hour> Equivalent to the format of the %H conversion specification format in date.
<minute> Equivalent to the format of the %M conversion specification format in date.
<year> Equivalent to the format of the %Y conversion specification format in date.
```
This actually used to be the format printed by llvm-ar. It was apparently accidentally changed (see r207385 followed by comments in r207387). This makes it conform to GNU ar for easier replacement.
Reviewers: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52940
llvm-svn: 343901
Enable time-passes functionality through PassInstrumentation callbacks
for passes and analyses.
TimePassesHandler class keeps all the callbacks, the timing data as it
is being collected as well as the stack of currently active timers.
Parts of the fix that might be somewhat unobvious:
- mapping of passes into Timer (TimingData) can not be done per-instance.
PassID name provided into the callback is common for all the pass invocations.
Thus the only way to get a timing with reasonable granularity is to collect
timing data per pass invocation, getting a new timer for each BeforePass.
Hence the key for TimingData uses a pair of <StringRef/unsigned count> to
uniquely identify a pass invocation.
- consequently, this new-pass-manager implementation performs no aggregation
of timing data, reporting timings for each pass invocation separately.
In that it differs from legacy-pass-manager time-passes implementation that
reports timing data aggregated per pass instance.
- pass managers and adaptors are not tracked, similar to how pass managers are
not tracked in legacy time-passes.
- TimerStack tracks timers that are active, each BeforePass pushes the new timer
on stack, each AfterPass pops active timer from stack and stops it.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D51276
llvm-svn: 343898
This rebases and recommits r343520. hwasan should be fixed now and this
shouldn't break the tests anymore.
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343895
On the PPC bot, the %llc_dwarf substitution does not contain an -mtriple
argument. This can cause the wrong backend to be exercised.
This causes issues because the backends differ in when they decide to
emit tail calls:
http://lab.llvm.org:8011/builders/clang-ppc64be-linux-multistage/builds/12440
This is mostly a speculative fix as I don't have a PPC machine to test
with.
llvm-svn: 343893
ASan often introduces basic blocks consisting exclusively of
instructions without debug locations, or with line 0 debug locations.
LiveDebugValues needs to extend variable ranges through these artificial
blocks. Otherwise, a lot of variables disappear -- even at -O0.
Typically, LiveDebugValues does not extend a variable's range into a
block unless the block is essentially "part of" the variable's scope
(for a precise definition, see LexicalScopes::dominates). This patch
relaxes the lexical dominance check for artificial blocks.
This makes the following Swift program debuggable at -O0:
```
1| var x = 100
2| print("x = \(x)")
```
rdar://39127144
Differential Revision: https://reviews.llvm.org/D52921
llvm-svn: 343890
This matches the output of binutils' nm and ensures that any scripts
or tools that use nm and expect empty output in case there no symbols
don't break.
Differential Revision: https://reviews.llvm.org/D52943
llvm-svn: 343887
Port over the implementation in SelectionDAGBuilder.cpp into the IRTranslator
and update the arm64-irtranslator test.
These were causing fallbacks in CTMark/Bullet (-Rpass-missed=gisel-select),
and this patch fixes that.
https://reviews.llvm.org/D52945
llvm-svn: 343885
DWARF v5 introduces DW_AT_call_all_calls, a subprogram attribute which
indicates that all calls (both regular and tail) within the subprogram
have call site entries. The information within these call site entries
can be used by a debugger to populate backtraces with synthetic tail
call frames.
Tail calling frames go missing in backtraces because the frame of the
caller is reused by the callee. Call site entries allow a debugger to
reconstruct a sequence of (tail) calls which led from one function to
another. This improves backtrace quality. There are limitations: tail
recursion isn't handled, variables within synthetic frames may not
survive to be inspected, etc. This approach is not novel, see:
https://gcc.gnu.org/wiki/summit2010?action=AttachFile&do=get&target=jelinek.pdf
This patch adds an IR-level flag (DIFlagAllCallsDescribed) which lowers
to DW_AT_call_all_calls. It adds the minimal amount of DWARF generation
support needed to emit standards-compliant call site entries. For easier
deployment, when the debugger tuning is LLDB, the DWARF requirement is
adjusted to v4.
Testing: Apart from check-{llvm, clang}, I built a stage2 RelWithDebInfo
clang binary. Its dSYM passed verification and grew by 1.4% compared to
the baseline. 151,879 call site entries were added.
rdar://42001377
Differential Revision: https://reviews.llvm.org/D49887
llvm-svn: 343883
Context: Compiler generated instructions do not have a debug location
assigned to them. However emitting 0-line records for all of them bloats
the line tables for very little benefit so we usually avoid doing that.
Not emitting anything will lead to the previous debug location getting
applied to the locationless instructions. This is not desirable for
block begin and after labels. Previously we would emit simply emit
line-0 records in this case, this patch changes the behavior to do a
forward search for a debug location in these cases before emitting a
line-0 record to further reduce line table bloat.
Inspired by the discussion in https://reviews.llvm.org/D52862
llvm-svn: 343874
The comments in this code say we were trying to avoid 16-bit immediates, but if the immediate fits in 8-bits this isn't an issue. This avoids creating a zero extend that probably won't go away.
The movmskb related changes are interesting. The movmskb instruction writes a 32-bit result, but fills the upper bits with 0. So the zero_extend we were previously emitting was free, but we turned a -1 immediate that would fit in 8-bits into a 32-bit immediate so it was still bad.
llvm-svn: 343871
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
And use that to transform fsub with zero constant operands.
The integer part isn't used yet, but it is proposed for use in
D44548, so adding both enhancements here makes that
patch simpler.
llvm-svn: 343865
Decode subvector shuffles from INSERT_SUBVECTOR(SRC0, SHUFFLE(EXTRACT_SUBVECTOR(SRC1))
This was found necessary while investigating PR39161
llvm-svn: 343853
Summary:
These are emitted by the wasm backend for e.g.
__stack_pointer@GLOBAL which previously wasn't accepted by the
assembler.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, llvm-commits, sunfish
Differential Revision: https://reviews.llvm.org/D52911
llvm-svn: 343830
Summary:
Fixes https://bugs.llvm.org/show_bug.cgi?id=39158 and regression caused by
D49034. Though it is possible the problem was existed before and was exposed by
additional DBG_VALUEs.
Reviewers: sunfish, dschuff, aheejin
Reviewed By: aheejin
Subscribers: sbc100, aheejin, llvm-commits, alexcrichton, jgravelle-google
Differential Revision: https://reviews.llvm.org/D52837
llvm-svn: 343827
The simplest instance of this is an intrinsic with no results which will have the
intrinsic ID as operand 0.
Also fix some benign incorrectness when op0 is a reg but isn't a def that was
guarded against by checking for the extension opcodes.
llvm-svn: 343821
We established the (unfortunately complicated) rules for UB/poison
propagation with vector ops in:
D48893
D48987
D49047
It's clear from the affected tests that we are potentially creating
poison where none existed before the transforms. For add/sub/mul,
the answer is simple: just drop the flags because the extra undef
vector lanes are generally more valuable for analysis and codegen.
llvm-svn: 343819
The isAmdCodeObjectV2 is a misleading name which actually checks whether the os
is amdhsa or mesa.
Also add a test to make sure we do not generate old kernel header for code
object v3.
Differential Revision: https://reviews.llvm.org/D52897
llvm-svn: 343813
This can happen if assembling a reference to _GLOBAL_OFFSET_TABLE_.
While it doesn't make sense to try to assemble that for COFF,
the fact that we previously used llvm_unreachable meant that the code
had undefined behaviour if something tried to assemble that.
The configure script of libgmp would try to assemble such a snippet
(which should signal a failure). If llvm is built without assertions,
the undefined behaviour meant a (near) infinite loop.
Differential Revision: https://reviews.llvm.org/D52903
llvm-svn: 343811
This change ensures that the (membername,timestamp) tuple uniquely
identifies an entry in an archive for format=darwin, in deterministic
mode (which is the default).
That, then, enables lldb and dsymutil to locate the appropriate object
within the archive.
Differential Revision: https://reviews.llvm.org/D47659
llvm-svn: 343805
This brings the extending loads patch back to the original intent but minus the
PHI bug and with another small improvement to de-dupe truncates that are
inserted into the same block.
The truncates are sunk to their uses unless this would require inserting before a
phi in which case it sinks to the _beginning_ of the predecessor block for that
path (but no earlier than the def).
The reason for choosing the beginning of the predecessor is that it makes de-duping
multiple truncates in the same block simple, and optimized code is going to run a
scheduler at some point which will likely change the position anyway.
llvm-svn: 343804
- Fix spill/reloads of XSeqPairs failing with vregs (only physregs
worked correctly)
- Add missing spill/reload code for WSeqPairs class
Differential Revision: https://reviews.llvm.org/D52761
llvm-svn: 343799
This is a follow-up to rL343482 / D52439.
This was a pattern that initially caused the commit to be reverted because
the transform requires a bitcast as shown here.
llvm-svn: 343794
f32 values passed on the stack would previously cause an assertion in
unpackFromMemLoc.. This would only trigger in the presence of the F extension
making f32 a legal type. Otherwise the f32 would be legalized.
This patch fixes that by keeping LocVT=f32 when a float is passed on the
stack. It also adds test coverage for this case, and tests that also
demonstrate lw/sw/flw/fsw will be selected when most profitable. i.e. there is
no unnecessary i32<->f32 conversion in registers.
llvm-svn: 343756
A `defined(NDEBUG) && !defined(LLVM_ENABLE_DUMP)` build does not call
writeEscaped and there will be no `SBWriteZeroLatency` in the output.
llvm-svn: 343751
Summary:
GNU nm (and other nm implementations, such as "go tool nm") prints an explicit "no symbols" message when an object file has no symbols. Currently llvm-nm just doesn't print anything. Adding an explicit "no symbols" message will allow llvm-nm to be used in place of nm: some scripts and build processes use `nm <file> | grep "no symbols"` as a test to see if a file has no symbols. It will also be more familiar to anyone used to nm.
That said, the format implemented here is slightly different, in that it doesn't print the tool name in the message (which IMHO is not useful to include).
Demo:
```
$ for nm in nm bin/llvm-nm ; do echo "nm implementation: $nm"; $nm /tmp/foo{1,2}.o; echo; done
nm implementation: nm
/tmp/foo1.o:
nm: /tmp/foo1.o: no symbols
/tmp/foo2.o:
0000000000000000 T foo2
nm implementation: bin/llvm-nm
/tmp/foo1.o:
no symbols
/tmp/foo2.o:
0000000000000000 T foo2
```
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52810
llvm-svn: 343742
MCContext does not destroy MCSymbols on shutdown. So, rather than putting
SmallVectors (which may heap-allocate) inside MCSymbolWasm, use unowned pointer
to a WasmSignature instead. The signatures are now owned by the AsmPrinter.
Also uses WasmSignature instead of param and result vectors in TargetStreamer,
and leaves some TODOs for further simplification.
Differential Revision: https://reviews.llvm.org/D52580
llvm-svn: 343733
If present, PHI nodes must appear before non-PHI nodes in a basic block. The
register allocator relies on this and will fail to eliminate PHI's that do not
meet this requirement.
llvm-svn: 343731
We're a long way from D50992 and D51553, but this is where we have to start.
We weren't back-propagating undefs into binop constant values for anything but
add/sub/mul/and/or/xor.
This is likely because we have to be careful about not introducing UB/poison
with div/rem/shift. But I suspect we already are getting the poison part wrong
for add/sub/mul (although it may not be possible to expose the bug currently
because we use SimplifyDemandedVectorElts from a limited set of opcodes).
See the discussion/implementation from D48987 and D49047.
This patch just enables functionality for FP ops because those do not have
UB/poison potential.
llvm-svn: 343727
This patch adds a 'WriteCopy' [WriteLoad, WriteStore] schedule sequence instead to better model the behaviour
Found by @andreadb during llvm-mca testing on btver2 which was crashing on "zero uop" WriteRMW only instructions
llvm-svn: 343708
This fixes a problem where the register allocator fails to eliminate a PHI
because there's a non-PHI in the middle of the PHI instructions at the start
of a BB.
This G_TRUNC can be better placed but this at least fixes the correctness issue
quickly. I'll follow up with a patch to the verifier to catch this kind of bug
in future.
llvm-svn: 343693
This patch teaches class RegisterFile how to analyze register writes from
instructions that are move elimination candidates.
In particular, it teaches it how to check if a move can be effectively eliminated
by the underlying PRF, and (if necessary) how to perform move elimination.
The long term goal is to allow processor models to describe instructions that
are valid move elimination candidates.
The idea is to let register file definitions in tablegen declare if/when moves
can be eliminated.
This patch is a non functional change.
The logic that performs move elimination is currently disabled. A future patch
will add support for move elimination in the processor models, and enable this
new code path.
llvm-svn: 343691
Fix use of SSE1 registers for f32 ops in no-x87 mode.
Notably, allow use of SSE instructions for f32 operations in 64-bit
mode (but not 32-bit which is disallowed by callign convention).
Also avoid translating memset/memcopy/memmove into SSE registers
without X87 for 32-bit mode.
This fixes PR38738.
Reviewers: nickdesaulniers, craig.topper
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D52555
llvm-svn: 343689
Two cases in a ThinLTO test were passing for the wrong reasons, since
rL340374. The tests were supposed to be testing that files were being
pruned due to the cache size, but they were in fact being pruned because
they were older than the default expiration period of 1 week.
This change fixes the tests by explicitly setting the expiration time to
the maximum value. This required the option to be exposed in llvm-lto.
By assigning all files in the cache a similar time, it is possible to see
that the newest files are still being kept, and that we aren't passing
for the wrong reason again. In the event that the entry expiration were
to expire for them, then the test would start failing, because these
files would be removed too.
Reviewed by: rnk, inglorion
Differential Revision: https://reviews.llvm.org/D51992
llvm-svn: 343687
Summary:
The new buffer/tbuffer intrinsics handle an out-of-range immediate
offset by moving/adding offset&-4096 to a vgpr, leaving an in-range
immediate offset, with a chance of the move/add being CSEd for similar
loads/stores.
However it turns out that a negative offset in a vgpr is illegal, even
if adding the immediate offset makes it legal again.
Therefore, this commit disables the offset&-4096 thing if the offset is
negative.
Differential Revision: https://reviews.llvm.org/D52683
Change-Id: Ie02f0a74f240a138dc2a29d17cfbd9e350e4ed13
llvm-svn: 343672
I was expecting this to be a nfc but Silvermont seems to be setup a little differently:
// A folded store needs a cycle on MEC_RSV for the store data, but it does not need an extra port cycle to recompute the address.
def : WriteRes<WriteRMW, [SLM_MEC_RSV]>;
So moving from WriteStore to WriteRMW reduces predicted port pressure, confirmed by @craig.topper that this is correct.
Differential Revision: https://reviews.llvm.org/D52740
llvm-svn: 343670
Modified the testcases to use both pass managers
Use single commandline flag for both pass managers.
Differential Revision: https://reviews.llvm.org/D52708
Reviewers: sebpop, tejohnson, brzycki, SirishP
Reviewed By: tejohnson, brzycki
llvm-svn: 343662
Summary: Depends on D45541
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar, aemerson
Subscribers: aemerson, rengolin, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45543
The previous commit failed portions of the test-suite on GreenDragon due to
duplicate COPY instructions and iterator invalidation. Both issues have now
been fixed. To assist with this, a helper (cloneVirtualRegister) has been added
to MachineRegisterInfo that can be used to get another register that has the same
type and class/bank as an existing one.
llvm-svn: 343654
We don't need to match the precise type index number here. It's not
important. The type name is what matters to make this test useful.
llvm-svn: 343642
Previously we were creating weakly defined helper function in
each translation unit:
- setThrew
- setTempRet0
Instead we now assume these will be provided at link time. In
emscripten they are provided in compiler-rt:
https://github.com/kripken/emscripten/pull/7203
Additionally we previously created three global variable which are
also now required to exist at link time instead.
- __THREW__
- _threwValue
- __tempRet0
Differential Revision: https://reviews.llvm.org/D49208
llvm-svn: 343640
The behaviour of this bot indicates that -verify-machineinstrs has been forced
on and is therefore inserting the verifier on builds that don't expect it.
Explicitly specify whether it's enabled or disabled for each test.
llvm-svn: 343633
Summary:
Use the newly added DebugInfo (DI) Trivial flag, which indicates if a C++ record is trivial or not, to determine Codeview::FunctionOptions.
Clang and MSVC generate slightly different Codeview for C++ records. For example, here is the C++ code for a class with a defaulted ctor,
class C {
public:
C() = default;
};
Clang will produce a LF for the defaulted ctor while MSVC does not. For more details, refer to FIXMEs in the test cases in "function-options.ll" included with this set of changes.
Reviewers: zturner, rnk, llvm-commits, aleksandr.urakov
Reviewed By: rnk
Subscribers: Hui, JDevlieghere
Differential Revision: https://reviews.llvm.org/D45123
llvm-svn: 343626
The 0x63 opcodes in 64-bit mode have a fixed source size of 32-bits, but the destination size is controlled by REX.W and the 0x66 opsize prefix. This instruction is normally used with a REX.W prefix which provides desired behavior. The other encodings are interpretted as valid by the processor, but aren't useful.
This patch makes us recognize them for the disassembler to match objdump.
llvm-svn: 343614
Add the .cv_fpo_stackalign directive so that we can define $T0, or the
VFRAME virtual register, with it. This was overlooked in the initial
implementation because unlike MSVC, we push CSRs before allocating stack
space, so this value is only needed to describe local variable
locations. Variables that the compiler now addresses via ESP are instead
described as being stored at offsets from VFRAME, which for us is ESP
after alignment in the prologue.
This adds tests that show that we use the VFRAME register properly in
our S_DEFRANGE records, and that we emit the correct FPO data to define
it.
Fixes PR38857
llvm-svn: 343603
The ARM elf emitter would omit printing data
symbol when constant data. This patch
overrides the emitFill method as to enforce that
the symbol is correctly printed.
Differential revision: https://reviews.llvm.org/D52737
llvm-svn: 343594
These are candidates for the same fold that was implemented in
D52439, but FP types require bitcasting (and that changes the
extra uses profitability calculation).
llvm-svn: 343587
This adds new instructions to manipluate tagged pointers, and to load
and store the tags associated with memory.
Patch by Pablo Barrio, David Spickett and Oliver Stannard!
Differential revision: https://reviews.llvm.org/D52490
llvm-svn: 343572
This adds new system registers introduced by the Memory Tagging
extension.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52488
llvm-svn: 343571
The Memory Tagging Extension adds system instructions for data cache
maintenance, implemented as new operands to the DC instruction.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52487
llvm-svn: 343570
This is an attempt to get out of a local-minimum that instcombine currently
gets stuck in. We essentially combine two optimisations at once, ~a - ~b = b-a
and min(~a, ~b) = ~max(a, b), only doing the transform if the result is at
least neutral. This involves using IsFreeToInvert, which has been expanded a
little to include selects that can be easily inverted.
This is trying to fix PR35875, using the ideas from Sanjay. It is a large
improvement to one of our rgb to cmy kernels.
Differential Revision: https://reviews.llvm.org/D52177
llvm-svn: 343569
Consistently try to use APFloat::toString for floating point constant comments to get rid of differences between Constant / ConstantDataSequential values - it should help stop some of the linux-windows buildbot failures matching NaN/INF etc. as well.
Differential Revision: https://reviews.llvm.org/D52702
llvm-svn: 343562
There's a strange assertion on two of the Green Dragon bots that goes away when
this is reverted. The assertion is in RegBankAlloc and if it is this commit then
-verify-machine-instrs should have caught it earlier in the pipeline.
llvm-svn: 343546
Summary:
Before this change, LLVM would always describe locals on the stack as
being relative to some specific register, RSP, ESP, EBP, ESI, etc.
Variables in stack memory are pretty common, so there is a special
S_DEFRANGE_FRAMEPOINTER_REL symbol for them. This change uses it to
reduce the size of our debug info.
On top of the size savings, there are cases on 32-bit x86 where local
variables are addressed from ESP, but ESP changes across the function.
Unlike in DWARF, there is no FPO data to describe the stack adjustments
made to push arguments onto the stack and pop them off after the call,
which makes it hard for the debugger to find the local variables in
frames further up the stack.
To handle this, CodeView has a special VFRAME register, which
corresponds to the $T0 variable set by our FPO data in 32-bit. Offsets
to local variables are instead relative to this value.
This is part of PR38857.
Reviewers: hans, zturner, javed.absar
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D52217
llvm-svn: 343543
Rong Xu