getARMVPTBlockMask was an outdated function that only handled basic
block masks: T, TT, TTT and TTTT. This worked fine before the MVE
VPT Block Insertion Pass improvements as it was the only kind of
masks that it could generate, but now it can generate more complex
masks that uses E predicates, so it's dangerous to use that function
to calculate VPT/VPST block masks.
I replaced it with 2 different functions:
- expandPredBlockMask, in ARMBaseInfo. This adds an "E" or "T" at
the end of an existing PredBlockMask.
- recomputeVPTBlockMask, in Thumb2InstrInfo. This takes an iterator
to a VPT/VPST instruction and recomputes its block mask by looking
at the predicated instructions that follows it. This should be
used to recompute a block mask after removing/adding a predicated
instruction to the block.
The expandPredBlockMask function is pretty much imported from the MVE
VPT Blocks pass.
I had to change the ARMLowOverheadLoops and MVEVPTBlocks passes as well
so they could use these new functions.
Differential Revision: https://reviews.llvm.org/D78201
- Specifically check for sext/zext users which have 'long' form NEON
instructions.
- Add more entries to the table for sext/zexts so that we can report
more accurately the number of vmovls required for NEON.
- Pass the instruction to the pass implementation.
Differential Revision: https://reviews.llvm.org/D79561
Unlike Neon, MVE does not have a way of duplicating from a vector lane,
so a VDUPLANE currently selects to a VDUP(move_from_lane(..)). This
forces that to be done earlier as a dag combine to allow other folds to
happen.
It converts to a VDUP(EXTRACT). On FP16 this is then folded to a
VGETLANEu to prevent it from creating a vmovx;vmovhr pair, using a
single move_from_reg instead.
Differential Revision: https://reviews.llvm.org/D79606
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
Enables the MVEGatherScatterLowering pass to build
pre-incrementing gathers. Incrementing writeback gathers
are built when it is possible to replace the loop increment
instruction.
Differential Revision: https://reviews.llvm.org/D76786
Much like the similar combine added recently for VMOVrh load, this
adds a fold for VMOVhr load turning it into a vldr.f16 as opposed to a
vldrh and vmov.f16.
Differential Revision: https://reviews.llvm.org/D78714
If we get into the situation where we are extracting from a VDUP, the
extracted value is just the origin, so long as the types match or we can
bitcast between the two.
Differential Revision: https://reviews.llvm.org/D78708
The idea, under MVE, is to introduce more bitcasts around VDUP's in an
attempt to get the type correct across basic block boundaries. In order
to do that without other regressions we need a few fixups, of which this
is the first. If the code is a bitcast of a VDUP, we can convert that
straight into a VDUP of the new type, so long as they have the same
size.
Differential Revision: https://reviews.llvm.org/D78706
This patch implements the final bits of CMSE code generation:
* emit special linker symbols
* restrict parameter passing to not use memory
* emit BXNS and BLXNS instructions for returns from non-secure entry
functions, and non-secure function calls, respectively
* emit code to save/restore secure floating-point state around calls
to non-secure functions
* emit code to save/restore non-secure floating-pointy state upon
entry to non-secure entry function, and return to non-secure state
* emit code to clobber registers not used for arguments and returns
when switching to no-secure state
Patch by Momchil Velikov, Bradley Smith, Javed Absar, David Green,
possibly others.
Differential Revision: https://reviews.llvm.org/D76518
getScalarizationOverhead is only ever called with vectors (and we already had a load of cast<VectorType> calls immediately inside the functions).
Followup to D78357
Reviewed By: @samparker
Differential Revision: https://reviews.llvm.org/D79341
A PREDICATE_CAST(PREDICATE_CAST(X)) can be converted to a
PREDICATE_CAST(X) as the operation can convert between any forms of
predicates (v4i1/v8i1/v16i1/i32). Unfortunately I got the type wrong on
one of the rarer converts, which would lead to invalid nodes during
isel. This fixes it up to use the correct type.
Differential Revision: https://reviews.llvm.org/D79402
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
This patch makes the folding of or(A, B) into not(and(not(A), not(B)))
more agressive for I1 vector. This only affects Thumb2 MVE and improves
codegen, because it removes a lot of msr/mrs instructions on VPR.P0.
This patch also adds a xor(vcmp) -> !vcmp fold for MVE.
Differential Revision: https://reviews.llvm.org/D77202
This patch adds an implementation of PerformVSELECTCombine in the
ARM DAG Combiner that transforms vselect(not(cond), lhs, rhs) into
vselect(cond, rhs, lhs).
Normally, this should be done by the target-independent DAG Combiner,
but it doesn't handle the kind of constants that we generate, so we
have to reimplement it here.
Differential Revision: https://reviews.llvm.org/D77712
This changes the logic with lowering fp16 bitcasts to always produce
either a VMOVhr or a VMOVrh, instead of only trying to do it with
certain surrounding nodes. To perform the same optimisations demand bits
and known bits information has been added for them.
Differential Revision: https://reviews.llvm.org/D78587
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
D63847 added `MCInstrAnalysis::evaluateMemoryOperandAddress()`. This patch
leverages the feature to print the target addresses for evaluable instructions.
```
-400a: movl 4080(%rip), %eax
+400a: movl 4080(%rip), %eax # 5000 <data1>
```
This patch also deletes `MIA->isCall(Inst) || MIA->isUnconditionalBranch(Inst) || MIA->isConditionalBranch(Inst)`
which is used to guard `MCInstrAnalysis::evaluateBranch()`
Reviewed By: jhenderson, skan
Differential Revision: https://reviews.llvm.org/D78776
There are some intrinsics like this that currently block tail
predication, but should be fine. This allows fma through, as the one
that I ran into. There may be others that need the same treatment but
I've only done this one here.
Differential Revision: https://reviews.llvm.org/D78385
hasNoSchedulingInfo should be used for Pseudo's and other instructions
that are never expected to be scheduled. This removes the flag from new
ARM instructions, instead fixing the A57 schedule by marking the related
architecture features as unsupported.
When compiling for a arm5te cpu from clang, the +dsp attribute is set.
This meant we could try and generate qadd8 instructions where we would
end up having no pattern. I've changed the condition here to be hasV6Ops
&& hasDSP, which is what other parts of ARMISelLowering seem to use for
similar instructions.
Fixed PR45677.
Differential Revision: https://reviews.llvm.org/D78877
Follow-up of D78082 (x86-64).
This change avoids dynamic relocations in `xray_instr_map` for ARM/AArch64/powerpc64le.
MIPS64 cannot use 64-bit PC-relative addresses because R_MIPS_PC64 is not defined.
Because MIPS32 shares the same code, for simplicity, we don't use PC-relative addresses for MIPS32 as well.
Tested on AArch64 Linux and ppc64le Linux.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D78590
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch32 and Assembly Parsing
D77872 has already added the MC representations of the instructions so that
they can be used in code gen; this patch fills in the details needed to
make assembly parsing work, and adds tests for asm and disasm
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, simon_tatham
Reviewed By: simon_tatham
Subscribers: simon_tatham, ostannard, kristof.beyls, hiraditya,
danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77874
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch32
- Intrinsics Support for AArch32 Neon Intrinsics for Matrix
Multiplication
Note: these extensions are optional in the 8.6a architecture and so have
to be enabled by default
No additional IR types or C Types are needed for this extension.
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, miyuki
Reviewed By: miyuki
Subscribers: miyuki, ostannard, kristof.beyls, hiraditya, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77872
Summary:
This commit recommits the reversion of https://reviews.llvm.org/D75039.
Concensus appears to be in favour of assembly-time resolution of
these ADR and LDR relocations, in line with GNU. The previous
backout broke many lld tests, now fixed by Peter Smith in
61bccda9d9.
Reviewers: psmith
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78301
If a 16-bit thumb STM with writeback stores the base register but it isn't the
first register in the list, then an unknown value is stored. The load/store
optimizer knows this and generates a 32-bit STM without writeback instead, but
thumb2 size reduction converts it into a 16-bit STM. Fix this by having thumb2
size reduction notice such STMs and leave them as they are.
Differential Revision: https://reviews.llvm.org/D78493
This adds some extra processing into the Pre-RA ARM load/store optimizer
to detect and merge MVE loads/stores and adds of the same base. This we
don't always turn into a post-inc during ISel, and due to the nature of
it being a graph we don't always know an order to use for the nodes, not
knowing which nodes to make post-inc and which to use the new post-inc
of. After ISel, we have an order that we can use to post-inc the
following instructions.
So this looks for a loads/store with a starting offset of 0, and an
add/sub from the same base, plus a number of other loads/stores. We then
do some checks and convert the zero offset load/store into a postinc
variant. Any loads/stores after it have the offset subtracted from their
immediates. For example:
LDR #4 LDR #4
LDR #0 LDR_POSTINC #16
LDR #8 LDR #-8
LDR #12 LDR #-4
ADD #16
It only handles MVE loads/stores at the moment. Normal loads/store will
be added in a followup patch, they just have some extra details to
ensure that we keep generating LDRD/LDM successfully.
Differential Revision: https://reviews.llvm.org/D77813
Finding the loop tripcount is the first crucial step in preparing a loop for
tail-predication, and this adds a debug message if a tripcount cannot be found.
And while I was at it, I added some more comments here and there.
Differential Revision: https://reviews.llvm.org/D78485
The logic in ARMParallelDSP is setup to merge two 16-bits loads into
a 32-bit load and feed them into the smlads. This requires that four
loads are combined for the four inputs, but there wasn't actually a
check for this.
Differential Revision: https://reviews.llvm.org/D78492
Summary:
Before this patch, `relaxInstruction` takes three arguments, the first
argument refers to the instruction before relaxation and the third
argument is the output instruction after relaxation. There are two quite
strange things:
1) The first argument's type is `const MCInst &`, the third
argument's type is `MCInst &`, but they may be aliased to the same
variable
2) The backends of ARM, AMDGPU, RISC-V, Hexagon assume that the third
argument is a fresh uninitialized `MCInst` even if `relaxInstruction`
may be called like `relaxInstruction(Relaxed, STI, Relaxed)` in a
loop.
In this patch, we drop the thrid argument, and let `relaxInstruction`
directly modify the given instruction. Also, this patch fixes the bug https://bugs.llvm.org/show_bug.cgi?id=45580, which is introduced by D77851, and
breaks the assumption of ARM, AMDGPU, RISC-V, Hexagon.
Reviewers: Razer6, MaskRay, jyknight, asb, luismarques, enderby, rtaylor, colinl, bcain
Reviewed By: Razer6, MaskRay, bcain
Subscribers: bcain, nickdesaulniers, nathanchance, wuzish, annita.zhang, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, tpr, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78364
Summary:
This commit reverts https://reviews.llvm.org/D75039. Concensus appears to
be in favour of assembly-time resolution of these ADR and LDR relocations,
in line with GNU.
Reviewers: psmith
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78301
The API for shuffles and reductions uses generic Type parameters,
instead of VectorType, and so assertions and casts are used a lot.
This patch makes those types explicit, which means that the clients
can't be lazy, but results in less ambiguity, and that can only be a
good thing.
Bugzilla: https://bugs.llvm.org/show_bug.cgi?id=45562
Differential Revision: https://reviews.llvm.org/D78357
Add patterns that use a normal, non-wrapping, add and sub nodes along
with an arm vshr imm node.
Differential Revision: https://reviews.llvm.org/D77065
Fix for the address optimization for gathers and scatters which would in
some complex cases push out instructions not to the vector loop preheader,
but to other locations as well which lead to a scrambled order and the
compilation failing.
This patch ensures that said instructions are always pushed to the end
of the vector loop preheader.
Differential Revision: https://reviews.llvm.org/D78293
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
The pass was incorrectly reverting back to a "T" when something wrote
to VPR inside a "E" block. This is not the correct behaviour, the
predicate should stay the same.
Differential Revision: https://reviews.llvm.org/D77798
It can be used to avoid passing the begin and end of a range.
This makes the code shorter and it is consistent with another
wrappers we already have.
Differential revision: https://reviews.llvm.org/D78016
The _GLOBAL_OFFSET_TABLE_ in SysVr4 ELF is conventionally the base of the
.got or .got.prel sections. Expressions such as _GLOBAL_OFFSET_TABLE_
- (.L1 +8) are used in assembler code to calculate offsets into the .got.
At present MC outputs a R_ARM_REL32 with respect to the
_GLOBAL_OFFSET_TABLE_ symbol, whereas gas outputs a R_ARM_BASE_PREL
relocation with respect to the _GLOBAL_OFFSET_TABLE_ symbol. While both are
correct the R_ARM_REL32 depends on the value of the _GLOBAL_OFFSET_TABLE_
symbol, wheras te R_ARM_BASE_PREL relocation is idependent of the symbol.
The R_ARM_BASE_PREL is therefore slightly more robust to linker's that may
not follow the conventional placement of _GLOBAL_OFFSET_TABLE_; for example
LLD for some time defined _GLOBAL_OFFSET_TABLE_ to 0.
Differential Revision: https://reviews.llvm.org/D46319
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: grosbach, efriedma, sdesmalen
Reviewed By: efriedma
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77271
This patch adds an analysis of the offset addresses used by gathers
and scatters to the MVEGatherScatterLowering pass to find
multiplications and additions that are loop invariant and thus can
be moved into the loop preheader, avoiding to execute them each time.
Differential Revision: https://reviews.llvm.org/D76681
If the stack pointer is altered for local variables and we are generating
Thumb2 execute-only code the .pad directive is missing.
Usually the size of the adjustment is stored in a PC-relative location
and loaded into a register which is then added to the stack pointer.
However when we are generating execute-only code code the size of the
adjustment is instead generated using the MOVW/MOVT instruction pair.
As a by product of handling the execute-only case this also fixes an
existing issue that in the none execute-only case the .pad directive was
generated against the load of the constant to a register instruction,
instead of the instruction which adds the register to the stack pointer.
Differential Revision: https://reviews.llvm.org/D76849
From Arm v8 Architecture Reference Manual F5.1.84 LDREXD
The ldrexd instruction in Arm state has the following conditions:
t = UInt(Rt); t2 = t + 1; n = UInt(Rn);
if Rt<0> == '1' || t2 == 15 || n == 15 then UNPREDICTABLE;
In when Rt is odd or if Rt is 14 (making t2 15).
In the implementation when the pair is the UNPREDICTABLE R14_R15 we
would ideally return SOFT_FAIL. We can't because there is no R14_R15
value for us to return so we fail early returning FAIL.
The early return for registers outside the bounds of the table means
the check for Rt == 14 (0xE) redundant which causes a static analyzer
to flag the condition as never being true.
To fix the warning I've removed the check and replaced with a comment
explaining the difference with the specification.
Fixes pr41660
Differential Revision: https://reviews.llvm.org/D77463
Currently when the target is big-endian vmov.i64 reverses the order of the two
words of the vector. This is correct only when the underlying element type is
32-bit, as actually what it should be doing is considering it a vector of the
underlying type and reversing the elements of that.
Differential Revision: https://reviews.llvm.org/D76515
If we have an element-wise vmov immediate instruction then a subsequent vrev
with width greater or equal to the vmov element width, then that vrev won't do
anything. Add a DAG combine to convert bitcasts that would become such vrevs
into vector_reg_casts instead.
Differential Revision: https://reviews.llvm.org/D76514
This adds MVE vmull patterns, which are conceptually the same as
mul(vmovl, vmovl), and so the tablegen patterns follow the same
structure.
For i8 and i16 this is simple enough, but in the i32 version the
multiply (in 64bits) is illegal, meaning we need to catch the pattern
earlier in a dag fold. Because bitcasts are involved in the zext
versions and the patterns are a little different in little and big
endian. I have only added little endian support in this patch.
Differential Revision: https://reviews.llvm.org/D76740
The unpredictable/hasSideEffects flag is usually inferred by tablegen
from whether the instruction has a tablegen pattern (and that pattern
only has a single output instruction). Now that the MVE intrinsics are
all committed and producing code, the remaining instructions still
marked as unpredictable need to be specially handled. This adds the flag
directly to instructions that need it, notably the V*MLAL instructions
and some of the MOV's.
Differential Revision: https://reviews.llvm.org/D76910
This allows the MVE VPT Block insertion pass to remove VPNOTs in
order to create more complex VPT blocks such as TE, TEET, TETE, etc.
Differential Revision: https://reviews.llvm.org/D75993
VPTMaskValue was using the "instruction" encoding to represent the masks
(= the same encoding as the one used by the instructions in an object file),
but it is only used to build MCOperands, so it should use the MCOperand
encoding of the masks, which is slightly different.
Differential Revision: https://reviews.llvm.org/D76139
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Leverage ARM ELF build attribute section to create ELF attribute section
for RISC-V. Extract the common part of parsing logic for this section
into ELFAttributeParser.[cpp|h] and ELFAttributes.[cpp|h].
Differential Revision: https://reviews.llvm.org/D74023
Add a bit more logic into the 'FalseLaneZeros' tracking to enable
horizontal reductions and also make the VADDV variants
validForTailPredication.
Differential Revision: https://reviews.llvm.org/D76708
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
In the original batch of MVE VMOVimm code generation VMOV.i64 was left
out due to the way it was done downstream. It turns out that it's fairly
simple though. This adds the codegen for it, similar to NEON.
Bigendian is technically incorrect in this version, which John is fixing
in a Neon patch.
Make these behave the same way unsafe-fp-math and co. The command line
flag should add the attribute to functions that do not already have
it, and leave existing attributes. The attribute is the actual
implementation, but the flag is useful in some testing situations.
AMDGPU has a variety of tests with denormals enabled/disabled that
would require a painful level of test duplication without a flag. This
doesn't expose setting the separate input/output modes, or add a flag
for the f32 version yet.
Tests will be included in future patch.
Generalizes D61992. In GNU as, the .reloc directive supports arbitrary relocation types.
A MCFixupKind value `V` larger than or equal to FirstLiteralRelocationKind
is used to represent the relocation type whose number is V-FirstLiteralRelocationKind.
This is useful for linker tests. Without the feature the assembler
cannot produce certain relocation records (e.g. R_ARM_ALU_PC_G0/R_ARM_LDR_PC_G0)
This helps move forward D75349 and D76575.
Differential Revision: https://reviews.llvm.org/D76746
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Given that some instructions generate wider result elements than
their inputs, flag them as being able to generate non zeros in the
false lanes.
Differential Revision: https://reviews.llvm.org/D76766
Add a flag for those instructions which read from the top/bottom
halves of their inputs and produce a vector of results with double
width elements.
Differential Revision: https://reviews.llvm.org/D76762
Follow-up of D72172 and D72180
This patch passes `uint64_t Address` to print methods of PC-relative
operands so that subsequent target specific patches can change
`*InstPrinter::print{Operand,PCRelImm,...}` to customize the output.
Add MCInstPrinter::PrintBranchImmAsAddress which is set to true by
llvm-objdump.
```
// Current llvm-objdump -d output
aarch64: 20000: bl #0
ppc: 20000: bl .+4
x86: 20000: callq 0
// Ideal output
aarch64: 20000: bl 0x20000
ppc: 20000: bl 0x20004
x86: 20000: callq 0x20005
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
aarch64: 20000: bl 20000
ppc: 20000: bl 0x20004
x86: 20000: callq 20005
```
In `lib/Target/X86/X86GenAsmWriter1.inc` (generated by `llvm-tblgen -gen-asm-writer`):
```
case 12:
// CALL64pcrel32, CALLpcrel16, CALLpcrel32, EH_SjLj_Setup, JCXZ, JECXZ, J...
- printPCRelImm(MI, 0, O);
+ printPCRelImm(MI, Address, 0, O);
return;
```
Some targets have 2 `printOperand` overloads, one without `Address` and
one with `Address`. They should annotate derived `Operand` properly with
`let OperandType = "OPERAND_PCREL"`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76574
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
Some MVE floating point instructions have gpr register variants that take
the scalar gpr value and splat them to all lanes. In order to accept
them in loops, the shuffle_vector and insert need to be sunk down into
the loop, next to the instruction so that ISel can see the whole
pattern.
This does that sinking for FAdd, FSub, FMul and FCmp. The patterns for
mul are slightly more constrained as there are no fms variants taking
register arguments.
Differential Revision: https://reviews.llvm.org/D76023
Summary:
This patch implements the following CDE intrinsics:
T __arm_vcx1q_m(int coproc, T inactive, uint32_t imm, mve_pred_t p);
T __arm_vcx2q_m(int coproc, T inactive, U n, uint32_t imm, mve_pred_t p);
T __arm_vcx3q_m(int coproc, T inactive, U n, V m, uint32_t imm, mve_pred_t p);
T __arm_vcx1qa_m(int coproc, T acc, uint32_t imm, mve_pred_t p);
T __arm_vcx2qa_m(int coproc, T acc, U n, uint32_t imm, mve_pred_t p);
T __arm_vcx3qa_m(int coproc, T acc, U n, V m, uint32_t imm, mve_pred_t p);
The intrinsics are not part of the released ACLE spec, but internally at
Arm we have reached consensus to add them to the next ACLE release.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76610
Move ARM ConstantIsland and LowOverheadLopps passes later in the pipeline
such that they will be run after the upcoming Machine Outlining pass.
Differential Revision: https://reviews.llvm.org/D76065
Add a target flag for instructions that reduce into one, or more,
scalar reg(s), including variants of:
- VADDV
- VABAV
- VMINV/VMAXV
- VMLADAV
Differential Revision: https://reviews.llvm.org/D76683
This adds a simple fold to combine VMOVrh load to a integer load.
Similar to what is already performed for BITCAST, but needs to account
for the types being of different sizes, creating an zero extending load.
Differential Revision: https://reviews.llvm.org/D76485
We deliberately split stores of the form
store(truncate(larger-than-legal-type)) into two stores, allowing each
store to perform part of the truncate for free.
There are times however where it makes more sense to use VMOVN to
de-interlace the results back into a single vector, and store that in
one go. This adds a check for that situation, not splitting the store if
it looks like a VMOVN can be more useful.
Differential Revision: https://reviews.llvm.org/D76511
Modify ValidateLiveOuts to track 'FalseLaneZeros' more precisely,
including checks on specific operations that can generate non-zeros
from zero values, e.g VMVN. We can then check that any instructions
that retain some information in their output register (all narrowing
instructions) that they only use and def registers that always have
zeros in their falsely predicated bytes, whether or not tail
predication happens.
Most of the logic remains the same, just the names of the data
structures and helpers have been renamed to reflect the change in
logic. The key change, apart from the opcode checkers, is that the
FalseZeros set now strictly contains only instructions which will
always generate zeros, and not instructions that could also have
their false bytes masked away later.
Differential Revision: https://reviews.llvm.org/D76235
Add a flag, 'RetainsPreviousHalfElement', for operations that operate
on top/bottom halves of their input and only write to half of their
destination, leaving the other half to retain its previous value.
Differential Revision: https://reviews.llvm.org/D76608
Summary:
I've implemented them as target-specific IR intrinsics rather than
using `@llvm.experimental.vector.reduce.add`, on the grounds that the
'experimental' intrinsic doesn't currently have much code generation
benefit, and my replacements encapsulate the sign- or zero-extension
so that you don't expose the illegal MVE vector type (`<4 x i64>`) in
IR.
The machine instructions come in two versions: with and without an
input accumulator. My new IR intrinsics, like the 'experimental' one,
don't take an accumulator parameter: we represent that by just adding
on the input value using an ordinary i32 or i64 add. So if you write
the `vaddvaq` C-language intrinsic with an input accumulator of zero,
it can be optimised to VADDV, and conversely, if you write something
like `x += vaddvq(y)` then that can be combined into VADDVA.
Most of this is achieved in isel lowering, by converting these IR
intrinsics into the existing `ARMISD::VADDV` family of custom SDNode
types. For the difficult case (64-bit accumulators), isel lowering
already implements the optimization of folding an addition into a
VADDLV to make a VADDLVA; so once we've made a VADDLV, our job is
already done, except that I had to introduce a parallel set of ARMISD
nodes for the //predicated// forms of VADDLV.
For the simpler VADDV, we handle the predicated form by just leaving
the IR intrinsic alone and matching it in an ordinary dag pattern.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76491
Summary:
I've implemented these as target-specific IR intrinsics, because
they're not //quite// enough like @llvm.experimental.vector.reduce.min
(which doesn't take the extra scalar parameter). Also this keeps the
predicated and unpredicated versions looking similar, and the
floating-point minnm/maxnm versions fold into the same schema.
We had a couple of min/max reductions already implemented, from the
initial pathfinding exercise in D67158. Those were done by having
separate IR intrinsic names for the signed and unsigned integer
versions; as part of this commit, I've changed them to use a flag
parameter indicating signedness, which is how we ended up deciding
that the rest of the MVE intrinsics family ought to work. So now
hopefully the ewhole lot is consistent.
In the new llc test, the output code from the `v8f16` test functions
looks quite unpleasant, but most of it is PCS lowering (you can't pass
a `half` directly in or out of a function). In other circumstances,
where you do something else with your `half` in the same function, it
doesn't look nearly as nasty.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76490
Summary:
This patch implements the following intrinsics:
uint8x16_t __arm_vcx1q_u8 (int coproc, uint32_t imm);
T __arm_vcx1qa(int coproc, T acc, uint32_t imm);
T __arm_vcx2q(int coproc, T n, uint32_t imm);
uint8x16_t __arm_vcx2q_u8(int coproc, T n, uint32_t imm);
T __arm_vcx2qa(int coproc, T acc, U n, uint32_t imm);
T __arm_vcx3q(int coproc, T n, U m, uint32_t imm);
uint8x16_t __arm_vcx3q_u8(int coproc, T n, U m, uint32_t imm);
T __arm_vcx3qa(int coproc, T acc, U n, V m, uint32_t imm);
Most of them are polymorphic. Furthermore, some intrinsics are
polymorphic by 2 or 3 parameter types, such polymorphism is not
supported by the existing MVE/CDE tablegen backends, also we don't
really want to have a combinatorial explosion caused by 1000 different
combinations of 3 vector types. Because of this some intrinsics are
implemented as macros involving a cast of the polymorphic arguments to
uint8x16_t.
The IR intrinsics are even more restricted in terms of types: all MVE
vectors are cast to v16i8.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76299
Summary:
This change implements ACLE CDE intrinsics that translate to
instructions working with general-purpose registers.
The specification is available at
https://static.docs.arm.com/101028/0010/ACLE_2019Q4_release-0010.pdf
Each ACLE intrinsic gets a corresponding LLVM IR intrinsic (because
they have distinct function prototypes). Dual-register operands are
represented as pairs of i32 values. Because of this the instruction
selection for these intrinsics cannot be represented as TableGen
patterns and requires custom C++ code.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76296
The MVE VDUP instruction take a GPR and splats into every lane of a
vector register. Unlike NEON we do not have a VDUPLANE equivalent
instruction, doing the same splat from a fp register. Previously a VDUP
to a v4f32/v8f16 would be represented as a (v4f32 VDUP f32), which
would mean the instruction pattern needs to add a COPY_TO_REGCLASS to
the GPR.
Instead this now converts that earlier during an ISel DAG combine,
converting (VDUP x) to (VDUP (bitcast x)). This can allow instruction
selection to tell that the input needs to be an i32, which in one of the
testcases allows it to use ldr (or specifically ldm) over (vldr;vmov).
Whilst being simple enough for floats, as the types sizes are the same,
these is no BITCAST equivalent for getting a half into a i32. This uses
a VMOVrh ARMISD node, which doesn't know the same tricks yet.
Differential Revision: https://reviews.llvm.org/D76292
Add pseudo instructions for ldrsbt/ldrht/ldrsht with implicit immediate
and add fall back C++ code to transform the instruction to the
equivalent LDRSBTi/LDRHTi/LDRSHTi form.
This is similar to how it has been done in commit
fb3950ec63
This fixes:
https://bugs.llvm.org/show_bug.cgi?id=45070
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
Summary:
This is another set of instructions too complicated to be sensibly
expressed in IR by anything short of a target-specific intrinsic.
Given input vectors a,b, the instruction generates intermediate values
2*(a[0]*b[0]+a[1]+b[1]), 2*(a[2]*b[2]+a[3]+b[3]), etc; takes the high
half of each double-width values, and overwrites half the lanes in the
output vector c, which you therefore have to provide the input value
of. Optionally you can swap the elements of b so that the are things
like a[0]*b[1]+a[1]*b[0]; optionally you can round to nearest when
taking the high half; and optionally you can take the difference
rather than sum of the two products. Finally, saturation is applied
when converting back to a single-width vector lane.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76359
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76348
Rather than trying to work out which instructions are part of the
epilogue by examining them, we can just mark them with the FrameDestroy
flag, like we do in the AArch64 backend.
Summary:
These are complicated integer multiply+add instructions with extra
saturation, taking the high half of a double-width product, and
optional rounding. There's no sensible way to represent that in
standard IR, so I've converted the clang builtins directly to
target-specific intrinsics.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76123
Summary:
These instructions compute multiply+add in integers, with one of the
operands being a splat of a scalar. (VMLA and VMLAS differ in whether
the splat operand is a multiplier or the addend.)
I've represented these in IR using existing standard IR operations for
the unpredicated forms. The predicated forms are done with target-
specific intrinsics, as usual.
When operating on n-bit vector lanes, only the bottom n bits of the
i32 scalar operand are used. So we have to tell that to isel lowering,
to allow it to remove a pointless sign- or zero-extension instruction
on that input register. That's done in `PerformIntrinsicCombine`, but
first I had to enable `PerformIntrinsicCombine` for MVE targets
(previously all the intrinsics it handled were for NEON), and make it
a method of `ARMTargetLowering` so that it can get at
`SimplifyDemandedBits`.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76122
For context, the proposed RISC-V bit manipulation extension has a subset
of instructions which require one of two SubtargetFeatures to be
enabled, 'zbb' or 'zbp', and there is no defined feature which both of
these can imply to use as a constraint either (see comments in D65649).
AssemblerPredicates allow multiple SubtargetFeatures to be declared in
the "AssemblerCondString" field, separated by commas, and this means
that the two features must both be enabled. There is no equivalent to
say that _either_ feature X or feature Y must be enabled, short of
creating a dummy SubtargetFeature for this purpose and having features X
and Y imply the new feature.
To solve the case where X or Y is needed without adding a new feature,
and to better match a typical TableGen style, this replaces the existing
"AssemblerCondString" with a dag "AssemblerCondDag" which represents the
same information. Two operators are defined for use with
AssemblerCondDag, "all_of", which matches the current behaviour, and
"any_of", which adds the new proposed ORing features functionality.
This was originally proposed in the RFC at
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139138.html
Changes to all current backends are mechanical to support the replaced
functionality, and are NFCI.
At this stage, it is illegal to combine features with ands and ors in a
single AssemblerCondDag. I suspect this case is sufficiently rare that
adding more complex changes to support it are unnecessary.
Differential Revision: https://reviews.llvm.org/D74338
The ASRL/LSRL long shifts are generated from 64bit shifts. Once we have
them, it might turn out that enough of the 64bit result was not required
that we can use a smaller shift to perform the same result. As the
smaller shift can in general be folded in more way, such as into add
instructions in one of the test cases here, we can use the demand bit
analysis to prefer the smaller shifts where we can.
Differential Revision: https://reviews.llvm.org/D75371
This changes the way that asrl and lsrl intrinsics are lowered, going
via a the ISEL ASRL and LSLL nodes instead of straight to machine nodes.
On top of that, it adds some constant folds for long shifts, in case it
turns out that the shift amount was either constant or 0.
Differential Revision: https://reviews.llvm.org/D75553
Summary:
This adds the ACLE intrinsic family for the VFMA and VFMS
instructions, which perform fused multiply-add on vectors of floats.
I've represented the unpredicated versions in IR using the cross-
platform `@llvm.fma` IR intrinsic. We already had isel rules to
convert one of those into a vector VFMA in the simplest possible way;
but we didn't have rules to detect a negated argument and turn it into
VFMS, or rules to detect a splat argument and turn it into one of the
two vector/scalar forms of the instruction. Now we have all of those.
The predicated form uses a target-specific intrinsic as usual, but
I've stuck to just one, for a predicated FMA. The subtraction and
splat versions are code-generated by passing an fneg or a splat as one
of its operands, the same way as the unpredicated version.
In arm_mve_defs.h, I've had to introduce a tiny extra piece of
infrastructure: a record `id` for use in codegen dags which implements
the identity function. (Just because you can't declare a Tablegen
value of type dag which is //only// a `$varname`: you have to wrap it
in something. Now I can write `(id $varname)` to get the same effect.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75998
Refines the gather/scatter cost model, but also changes the TTI
function getIntrinsicInstrCost to accept an additional parameter
which is needed for the gather/scatter cost evaluation.
This did require trivial changes in some non-ARM backends to
adopt the new parameter.
Extending gathers and truncating scatters are now priced cheaper.
Differential Revision: https://reviews.llvm.org/D75525
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
On some Arm cores there is a performance penalty when forwarding from an
S register to a D register. Calculating VMAX in a D register creates
false forwarding hazards, so don't do that unless we're on a core which
specifically asks for it.
Patch by James Greenhalgh
Differential Revision: https://reviews.llvm.org/D75248
Iterate through the loop and check that the observable values
produced are the same whether tail predication happens or not.
We want to find out if the tail-predicated version of this loop will
produce the same values as the loop in its original form. For this to
be true, the newly inserted implicit predication must not change the
the (observable) results.
We're doing this because many instructions in the loop will not be
predicated and so the conversion from VPT predication to tail
predication can result in different values being produced, because of
falsely predicated lanes not being updated in the converted form.
A masked load, whether through VPT or tail predication, will write
zeros to any of the falsely predicated bytes. So, from the loads, we
know that the false lanes are zeroed and here we're trying to track
that those false lanes remain zero, or where they change, the
differences are masked away by their user(s).
All MVE loads and stores have to be predicated, so we know that any
load operands, or stored results are equivalent already. Other
explicitly predicated instructions will perform the same operation in
the original loop and the tail-predicated form too. Because of this,
we can insert loads, stores and other predicated instructions into
our KnownFalseZeros set and build from there.
Differential Revision: https://reviews.llvm.org/D75452
Summary:
ARMAsmParser was incorrectly dropping a leading dollar sign character
from symbol names in targets of branch instructions. This was caused by
an incorrect assumption that the contents following the dollar sign
token should be handled as a constant immediate, similarly to the #
token.
This patch avoids the operand parsing from consuming the dollar sign
token when it is followed by an identifier, making sure it is properly
parsed as part of the expression.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: danielkiss, chill, carwil, vhscampos, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73176
Summary:
The VSHLC instruction performs a left shift of a whole vector register
by an immediate shift count up to 32, shifting in new bits at the low
end from a GPR and delivering the shifted-out bits from the high end
back into the same GPR.
Since the instruction produces two outputs (the shifted vector
register and the output GPR of shifted-out bits), it has to be
instruction-selected in C++ rather than Tablegen.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75445
Summary:
These are exactly parallel to the existing `vadciq` intrinsics, which
we implemented last year as part of the original MVE intrinsics
framework setup.
Just like VADC/VADCI, the MVE VSBC/VSBCI instructions deliver two
outputs, both of which the intrinsic exposes: a modified vector
register and a carry flag. So they have to be instruction-selected in
C++ rather than Tablegen. However, in this case, that's trivial: the
same C++ isel routine we already have for VADC works unchanged, and
all we have to do is to pass it a different instruction id.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75444
Use MIOperand in collectLocalKilledOperands to make the search
global, as we already have to search for global uses too. This
allows us to delete more dead code when tail predicating.
Differential Revision: https://reviews.llvm.org/D75167
In RDA, check against the already decided dead instructions when
looking at users. This allows an instruction to be removed if it
has multiple users, but they're all dead.
This means that IT instructions can be considered killed once all
the itstate using instructions are dead.
Differential Revision: https://reviews.llvm.org/D75245
Summary:
It is not safe for ARMConstantIslands to undoLRSpillRestore. PrologEpilogInserter is
the one to ensure stack alignment, taking into consideration LR is spilled or not.
For noreturn function with StackAlignment 8 (function contains call/alloc),
undoLRSpillRestore cause stack be mis-aligned. Fixing stack alignment in
ARMConstantIslands doesn't give us much benefit, as undo LR spill/restore only
occur in large function with near branches only, also doesn't have callee-saved LR spill.
Reviewers: t.p.northover, rengolin, efriedma, apazos, samparker, ostannard
Reviewed By: ostannard
Subscribers: dmgreen, ostannard, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75288
This patch upstreams support for the ARM Armv8.1m cpu Cortex-M55.
In detail adding support for:
- mcpu option in clang
- Arm Target Features in clang
- llvm Arm TargetParser definitions
details of the CPU can be found here:
https://developer.arm.com/ip-products/processors/cortex-m/cortex-m55
Reviewers: chill
Reviewed By: chill
Subscribers: dmgreen, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74966
Summary:
These instructions convert a vector of floats to a vector of integers
of the same size, with assorted non-default rounding modes.
Implemented in IR as target-specific intrinsics, because as far as I
can see there are no matches for that functionality in the standard IR
intrinsics list.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75255
Summary:
These instructions make a vector of `<4 x float>` by widening every
other lane of a vector of `<8 x half>`.
I wondered about representing these using standard IR, along the lines
of a shufflevector to extract elements of the input into a `<4 x half>`
followed by an `fpext` to turn that into `<4 x float>`. But it looks as
if that would take a lot of work in isel lowering to make it match any
pattern I could sensibly write in Tablegen, and also I haven't been
able to think of any other case where that pattern might be generated
in IR, so there wouldn't be any extra code generation win from doing
it that way.
Therefore, I've just used another target-specific intrinsic. We can
always change it to the other way later if anyone thinks of a good
reason.
(In order to put the intrinsic definition near similar things in
`IntrinsicsARM.td`, I've also lifted the definition of the
`MVEMXPredicated` multiclass higher up the file, without changing it.)
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75254
Summary:
The two MVE instructions that convert between v4f32 and v8f16 were
implemented as instances of the same class, with the same MC operand
list.
But that's not really appropriate, because the narrowing conversion
only partially overwrites its output register (it only has 4 f16
values to write into a vector of 8), so even when unpredicated, it
needs a $Qd_src input, a constraint tying that to the $Qd output, and
a vpred_n.
The widening conversion is better represented like any other
instruction that completely replaces its output when unpredicated: it
should have no $Qd_src operand, and instead, a vpred_r containing a
$inactive parameter. That's a better match to other similar
instructions, such as its integer analogue, the VMOVL instruction that
makes a v4i32 by sign- or zero-extending every other lane of a v8i16.
This commit brings the widening VCVT.F32.F16 into line with the other
instructions that behave like it. That means you can write isel
patterns that use it unpredicated, without having to add a pointless
undefined $QdSrc operand.
No existing code generation uses that instruction yet, so there should
be no functional change from this fix.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75253
Summary:
These instructions work like VMOVN (narrowing a vector of wide values
to half size, and overwriting every other lane of an output register
with the result), except that the narrowing conversion is saturating.
They come in three signedness flavours: signed to signed, unsigned to
unsigned, and signed to unsigned. All are represented in IR by a
target-specific intrinsic that takes two separate 'unsigned' flags.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75252
The MVE gather instructions smaller than 32bits zext extend the values
in the offset register, as opposed to sign extending them. We need to
make sure that the code that we select from is suitably extended, which
this patch attempts to fix by tightening up the offset checks.
Differential Revision: https://reviews.llvm.org/D75361
As a narrow stopgap for the assertion failure described in PR45025, add
a describeLoadedValue override to ARMBaseInstrInfo and use it to detect
copies in which the forwarding reg is a super/sub reg of the copy
destination. For the moment this is unsupported.
Several follow ups are possible:
1) Handle VORRq. At the moment, we do not, because isCopyInstrImpl
returns early when !MI.isMoveReg().
2) In the case where forwarding reg is a super-reg of the copy
destination, we should be able to describe the forwarding reg as a
subreg within the copy destination. I'm not 100% sure about this, but
it looks like that's what's done in AArch64InstrInfo.
3) In the case where the forwarding reg is a sub-reg of the copy
destination, maybe we could describe the forwarding reg using the
copy destinaion and a DW_OP_LLVM_fragment (I guess this should be
possible after D75036).
https://bugs.llvm.org/show_bug.cgi?id=45025
rdar://59772698
Differential Revision: https://reviews.llvm.org/D75273
This addes extra patterns for the VMLAS MVE instruction, which performs
Qda = Qda * Qn + Rm, a similar pattern to the existing VMLA. The sinking
of splat(Rm) into the loop is already performed, meaning we just need
extra Pat's in tablegen.
Differential Revision: https://reviews.llvm.org/D75115
Add ELF relocations for the following fixups:
fixup_thumb_adr_pcrel_10 -> R_ARM_THM_PC8
fixup_thumb_cp -> R_ARM_THM_PC8
fixup_t2_adr_pcrel_12 -> R_ARM_THM_PREL_11_0
fixup_t2_ldst_pcrel_12 -> R_ARM_THM_PC12
While these relocations are short-ranged there is support in the open
source ELF linker's in binutils and soon to be in LLD. MC will no longer
resolve pc-relative fixups to global symbols due to interpositioning
concerns. We can handle these at link time by implementing the relocations.
The R_ARM_THM_PC8 has some extra encoding rules for addends that llvm-mc
sidesteps by not supporting addends for these instructions, using the wide
Thumb 2 instruction if it is available. I think that this is a reasonable
compromise given that these are rare.
This partiall reverts D72892, the Thumb fixups no longer need to be
evaluated at assembly time.
Differential Revision: https://reviews.llvm.org/D75039
Ensure that we're recording implicit defs, as well as visiting implicit
uses and implicit defs when we're walking through operands.
Differential Revision: https://reviews.llvm.org/D75185
Support the explicit wide assembler qualifier for the dmb/dsb/isb synchronization barrier instructions.
Differential revision: https://reviews.llvm.org/D75143
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
MC currently does not emit these relocation types, and lld does not
handle them. Add FKF_Constant as a work-around of some ARM code after
D72197. Eventually we probably should implement these relocation types.
By Fangrui Song!
Differential revision: https://reviews.llvm.org/D72892
Summary:
This commit adds the predicated MVE intrinsics for the same set of
unary operations that I added in their unpredicated forms in
* D74333 (vrint)
* D74334 (vrev)
* D74335 (vclz, vcls)
* D74336 (vmovl)
* D74337 (vmovn)
but since the predicated versions are a lot more similar to each
other, I've kept them all together in a single big patch. Everything
here is done in the standard way we've been doing other predicated
operations: an IR intrinsic called `@llvm.arm.mve.foo.predicated` and
some isel rules that match that alongside whatever they accept for the
unpredicated version of the same instruction.
In order to write the isel rules conveniently, I've refactored the
existing isel rules for the affected instructions into multiclasses
parametrised by a vector-type class, in the usual way. All those
refactorings are intended to leave the existing isel rules unchanged:
the only difference should be that new ones for the predicated
intrinsics are introduced.
The only tiny infrastructure change I needed in this commit was to
change the implementation of `IntrinsicMX` in `arm_mve_defs.td` so
that the records it defines are anonymous rather than named (and use
`NameOverride` to set the output intrinsic name), which allows me to
call it twice in two multiclasses with the same `NAME` without a
tablegen-time error.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75165
Add getUniqueReachingMIDef to RDA which performs a global search for
a machine instruction that produces a unique definition of a given
register at a given point. Also add two helper functions
(getMIOperand) that wrap around this functionality to get the
incoming definition uses of a given instruction. These now replace
the uses of getReachingMIDef in ARMLowOverheadLoops. getReachingMIDef
has been renamed to getReachingLocalMIDef and has been made private
along with getInstFromId.
Differential Revision: https://reviews.llvm.org/D74605
Fixed an issue exposed by D74006.
In clang cc1as, MCContext::UseNamesOnTempLabels is true.
When parsing a .fnstart directive, FnStart gets redefined to a temporary symbol of a different name (.Ltmp0, .Ltmp1, ...).
MCContext::getELFSection() called by SwitchToEHSection() will create a different .ARM.exidx each time.
llvm-mc uses `Ctx.setUseNamesOnTempLabels(false);` and FnStart is unnamed.
MCContext::getELFSection() called by SwitchToEHSection() will reuse the same .ARM.exidx .
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75095
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Future patches will make use of TTI to perform cost-model-driven `SCEVExpander::isHighCostExpansionHelper()`
This is a fully NFC patch to make things reviewable.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, zzheng, javed.absar, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73704
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
Change the way that we remove the redundant iteration count code in
the presence of IT blocks. collectLocalKilledOperands has been
introduced to scan an instructions operands, collecting the killed
instructions and then visiting them too. This is used to delete the
code in the preheader which calculates the iteration count. We also
track any IT blocks within the preheader and, if we remove all the
instructions from the IT block, we also remove the IT instruction.
isSafeToRemove is used to remove any redundant uses of the iteration
count within the loop body.
Differential Revision: https://reviews.llvm.org/D74975
This moves all the logic of converting LLVM Triples to
MachO::CPU_(SUB_)TYPE from the specific target (Target)AsmBackend to
more convenient functions in lib/BinaryFormat.
This also gets rid of the separate two X86AsmBackend classes.
The previous attempt was to add it to libObject, but that adds an
unnecessary dependency to libObject from all the targets.
Differential Revision: https://reviews.llvm.org/D74808
The code at https://reviews.llvm.org/D74808 has broken builds that are
configured with -DBUILD_SHARED_LIBS=On.
This patch adds the correct library dependencies.
This moves all the logic of converting LLVM Triples to
MachO::CPU_(SUB_)TYPE from the specific target (Target)AsmBackend to
more convenient functions in libObject.
This also gets rid of the separate two X86AsmBackend classes.
Differential Revision: https://reviews.llvm.org/D74808
Summary:
This patch adds two families of ACLE intrinsics: vqdmullbq and
vqdmulltq (including vector-vector and vector-scalar variants) and the
corresponding LLVM IR intrinsics llvm.arm.mve.vqdmull and
llvm.arm.mve.vqdmull.predicated.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74845
Summary:
Some predicated MVE intrinsics return a vector with element size
different from the input vector element size. In this case the
predicate must type correspond to the output vector type.
The following intrinsics use the incorrect predicate type:
* llvm.arm.mve.mull.int.predicated
* llvm.arm.mve.mull.poly.predicated
* llvm.arm.mve.vshll.imm.predicated
This patch fixes the issue.
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74838
Check that no Q-regs are live out of the loop, unless the instruction
within the loop is predicated on the vctp.
Differential Revision: https://reviews.llvm.org/D72713
Similar to VADDV and VADDLV that have been added recently, this adds
lowering and patterns for VMLAV, VMLAVA, VMLALV and VMLALVA. They
perform the same roles as the add's, just folding a mul into the same
instruction (and so taking two inputs). As such, they need to be lowered
in the same way as the types are often not legal.
Differential Revision: https://reviews.llvm.org/D74390
Following on from the extra VADDV lowering, this extends things to
handle VADDLV which allows summing values into a pair of i32 registers,
together treated as a i64. This needs to be done in DAGCombine too as
the types are otherwise illegal, which is a fairly simple addition on
top of the existing code.
There is also a VADDLVA instruction handled here, that adds the incoming
values from the two general purpose registers. As opposed to the
non-long version where we could just add patterns for add(x, VADDV), the
long version needs to handle this early before the i64 has being split
into too many pieces.
Differential Revision: https://reviews.llvm.org/D74224
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
We already make use of the VADDV vector reduction instruction for cases
where the input and the output start out at the same type. The MVE
instruction however will sum into an i32, so if we are summing a v16i8
into an i32, we can still use the same instructions. In terms of IR,
this looks like a sext of a legal type (v16i8) into a very illegal type
(v16i32) and a vecreduce.add of that into the result. This means we have
to catch the pattern early in a DAG combine, producing a target VADDVs/u
node, where the signedness is now important.
This is the first part, handling VADDV and VADDVA. There are also
VADDVL/VADDVLA instructions, which are interesting because they sum into
a 64bit value. And VMLAV and VMLALV, which are interesting because they
also do a multiply of two values. It may look a little odd in places as
a result.
On it's own this will probably not do very much, as the vectorizer will
not produce this IR yet.
Differential Revision: https://reviews.llvm.org/D74218
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
Summary:
This patch adds a new MVE intrinsics family, `vbrsrq`: vector bit
reverse and shift right. The intrinsics are compiled into the VBRSR
instruction. Two new LLVM IR intrinsics were also added: arm.mve.vbrsr
and arm.mve.vbrsr.predicated.
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74721
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
These are in some sense the inverse of vmovl[bt]q: they take a vector
of n wide elements and truncate each to half its width. So they only
write half a vector's worth of output data, and therefore they also
take an 'inactive' parameter to provide the other half of the data in
the output vector. So vmovnb overwrites the even lanes of 'inactive'
with the narrowed values from the main input, and vmovnt overwrites
the odd lanes.
LLVM had existing codegen which generates these MVE instructions in
response to IR that takes two vectors of wide elements, or two vectors
of narrow ones. But in this case, we have one vector of each. So my
clang codegen strategy is to narrow the input vector of wide elements
by simply reinterpreting it as the output type, and then we have two
narrow vectors and can represent the operation as a vector shuffle
that interleaves lanes from both of them.
Even so, not all the cases I needed ended up being selected as a
single MVE instruction, so I've added a couple more patterns that spot
combinations of the 'MVEvmovn' and 'ARMvrev32' SDNodes which can be
generated as a VMOVN instruction with operands swapped.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74337
Summary:
These intrinsics take a vector of 2n elements, and return a vector of
n wider elements obtained by sign- or zero-extending every other
element of the input vector. They're represented in IR as a
shufflevector that extracts the odd or even elements of the input,
followed by a sext or zext.
Existing LLVM codegen already matches this pattern and generates the
VMOVLB instruction (which widens the even-index input lanes). But no
existing isel rule was generating VMOVLT, so I've added some. However,
the new rules currently only work in little-endian MVE, because the
pattern they expect from isel lowering includes a bitconvert which
doesn't have the right semantics in big-endian.
The output of one existing codegen test is improved by those new
rules.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74336
Summary:
When we start putting instances of `ARMVectorRegCast` in complex isel
patterns, it will be awkward that they're often turned into the more
standard `bitconvert` in little-endian mode. We'd rather not have to
write separate isel patterns for the two endiannesses, matching
different but equivalent cast operations.
This change aims to fix that awkwardness in advance, by turning the
Tablegen record `ARMVectorRegCast` from a simple `SDNode` instance
into a `PatFrags` that can match either kind of cast – with a
predicate that prevents it matching a bitconvert in the big-endian
case, where bitconvert isn't semantically identical.
No existing code generation should be affected by this change, but it
will enable the patterns introduced by D74336 to work in both
endiannesses.
Reviewers: dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74716
Summary:
vclzq maps nicely to the existing target-independent @llvm.ctlz IR
intrinsic. But vclsq ('count leading sign bits') has no corresponding
target-independent intrinsic, so I've made up @llvm.arm.mve.vcls.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74335
Summary:
This adds the unpredicated forms of six different MVE intrinsics which
all round a vector of floating-point numbers to integer values,
leaving them still in FP format, differing only in rounding mode and
exception settings.
Five of them map to existing target-independent intrinsics in LLVM IR,
such as @llvm.trunc and @llvm.rint. The sixth, mapping to the `vrintn`
instruction, is done by inventing a target-specific intrinsic.
(`vrintn` behaves the same as `vrintx` in terms of the output value:
the side effects on the FPSCR flags are the only difference between
the two. But ACLE specifies separate user-callable intrinsics for the
two, so the side effects matter enough to make sure we generate the
right one of the two instructions in each case.)
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74333
mutateStrictFPToFP can delete the node and replace it with another with the same
value which can later cause problems, and returning the result of
mutateStrictFPToFP doesn't work because SelectionDAGLegalize expects that the
returned value has the same number of results as the original. Instead handle
things by doing the mutation manually.
Differential Revision: https://reviews.llvm.org/D74726
Summary:
This patch adds vector-scalar variants to the following families of
MVE intrinsics:
* vaddq
* vsubq
* vmulq
* vqaddq
* vqsubq
* vhaddq
* vhsubq
* vqdmulhq
* vqrdmulhq
The vector-scalar variants perform a splat operation on the scalar
operand and then perform the same operations as their vector-vector
counterparts. Code generation is done accordingly (using LLVM IR 'insert'
and 'shuffle' operations which are later converted into an ARMvdup
SDNode).
Reviewers: simon_tatham, dmgreen, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74620
Summary:
This patch adds assembly-level support for a new Arm M-profile
architecture extension, Custom Datapath Extension (CDE).
A brief description of the extension is available at
https://developer.arm.com/architectures/instruction-sets/custom-instructions
The latest specification for CDE is currently a beta release and is
available at
https://static.docs.arm.com/ddi0607/aa/DDI0607A_a_armv8m_arm_supplement_cde.pdf
CDE allows chip vendors to add custom CPU instructions. The CDE
instructions re-use the same encoding space as existing coprocessor
instructions (such as MRC, MCR, CDP etc.). Each coprocessor in range
cp0-cp7 can be configured as either general purpose (GCP) or custom
datapath (CDEv1). This configuration is defined by the CPU vendor and
is provided to LLVM using 8 subtarget features: cdecp0 ... cdecp7.
The semantics of CDE instructions are implementation-defined, but the
instructions are guaranteed to be pure (that is, they are stateless,
they do not access memory or any registers except their explicit
inputs/outputs).
CDE requires the CPU to support at least Armv8.0-M mainline
architecture. CDE includes 3 sets of instructions:
* Instructions that operate on general purpose registers and NZCV
flags
* Instructions that operate on the S or D register file (require
either FP or MVE extension)
* Instructions that operate on the Q register file, require MVE
The user-facing names that can be specified on the command line are
the same as the 8 subtarget feature names. For example:
$ clang -target arm-none-none-eabi -march=armv8m.main+cdecp0+cdecp3
tells the compiler that the coprocessors 0 and 3 are configured as
CDEv1 and the remaining coprocessors are configured as GCP (which is
the default).
Reviewers: simon_tatham, ostannard, dmgreen, eli.friedman
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74044
If the target has FP64 but not FP16 then we have custom lowering for FP_EXTEND
and STRICT_FP_EXTEND with type f64. However if the extend is from f32 to f64 the
current implementation will cause in infinite loop for STRICT_FP_EXTEND due to
emitting a merge_values of the original node which after replacement becomes a
merge_values of itself.
Fix this by not doing anything for f32 to f64 extend when we have FP64, though
for STRICT_FP_EXTEND we have to do the strict-to-nonstrict mutation as that
doesn't happen automatically for opcodes with custom lowering.
Differential Revision: https://reviews.llvm.org/D74559
Simon pointed out that this function is doing a bitcast, which can be
incorrect for big endian. That makes the lowering of VMOVN in MVE
wrong, but the function is shared between Neon and MVE so both can
be incorrect.
This attempts to fix things by using the newly added VECTOR_REG_CAST
instead of the BITCAST. As it may now be used on Neon, I've added the
relevant patterns for it there too. I've also added a quick dag combine
for it to remove them where possible.
Differential Revision: https://reviews.llvm.org/D74485
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Add a new method (tryParseRegister) that attempts to parse a register specification.
MASM allows the use of IFDEF <register>, as well as IFDEF <symbol>. To accommodate this, we make it possible to check whether a register specification can be parsed at the current location, without failing the entire parse if it can't.
Reviewers: thakis
Reviewed By: thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73486
A small IR change in calculating the active lanes resulted in no longer
recognising tail-predication. Now recognise both an 'add' and 'or' in
the expression that calculates the active lanes.
Differential Revision: https://reviews.llvm.org/D74394
Use the isCandidateForCallSiteEntry().
This should mostly be an NFC, but there are some parts ensuring
the moveCallSiteInfo() and copyCallSiteInfo() operate with call site
entry candidates (both Src and Dest should be the call site entry
candidates).
Differential Revision: https://reviews.llvm.org/D74122
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Update lambda function
static auto InitializeRegisterBankOnce = [this](const auto &TRI) {
with
static auto InitializeRegisterBankOnce = [&]() {
Capture reference instead of passing argument, as there are buildbot
compiling errors related when passing argument.
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
Once we have created a tail-predicated hardware-loop, and thus know the number
of elements that are processed, we want to clean-up the iteration count
expression of that loop. In D73682, we bailed the analysis on conditionally
executed instructions. This adds support for IT-blocks, so that we can handle
these cases again. The restriction is that we only support IT blocks containing
1 statement, but that seems to cover most cases and forms of the iteration
count expression.
Differential Revision: https://reviews.llvm.org/D73947
Checking that the use-def chain that performs the loop count
isSafeToRemove is not sufficient because it means that we can
remove register copies that we need to restore lr to its correct
value. This change now prevents the transform from kicking in for the
'remove-elem-moves' test which needs to addressed later on.
Differential Revision: https://reviews.llvm.org/D74037
While validating each MVE instruction, check that all instructions
that touch memory are somehow predicated upon the VCTP.
Differential Revision: https://reviews.llvm.org/D73616
Summary:
After following Simon's suggestion about additional testing posted at
https://reviews.llvm.org/D73906, I found several more places that
need to be updated.
Reviewers: simon_tatham, dmgreen, ostannard, eli.friedman
Reviewed By: simon_tatham
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73963
Summary:
This patch changes the underlying type of the ARM::ArchExtKind
enumeration to uint64_t and adjusts the related code.
The goal of the patch is to prepare the code base for a new
architecture extension.
Reviewers: simon_tatham, eli.friedman, ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits, pbarrio
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73906
Under MVE, we do not have any lowering for fminimum, which a
vector_reduce_fmin without NoNan will be expanded into. As with the
other recent patches, force this to expand in the pre-isel pass. Note
that Neon lowering would be OK because the scalar fminimum uses the
vector VMIN instruction, but is probably better to just rely on the
scalar operations, which is what is done here.
Also fixes what appears to be the reversal of INF vs -INF in the
vector_reduce_fmin widening code.
Followup to D73135. If the target doesn't have hard float (default
for ARM), then we assert when trying to soften the result of vector
reduction intrinsics. This patch marks these for expansion as well.
(A bit odd to use vectors on a target without hard float ... but
that's where you end up if you expose target-independent vector types.)
Differential Revision: https://reviews.llvm.org/D73854
Craig Topper