generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
llvm-svn: 146026
1. Added opcode BUNDLE
2. Taught MachineInstr class to deal with bundled MIs
3. Changed MachineBasicBlock iterator to skip over bundled MIs; added an iterator to walk all the MIs
4. Taught MachineBasicBlock methods about bundled MIs
llvm-svn: 145975
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
llvm-svn: 145714
Conservatively returns zero when the GV does not specify an alignment nor is it
initialized. Previously it returns ABI alignment for type of the GV. However, if
the type is a "packed" type, then the under-specified alignments is attached to
the load / store instructions. In that case, the alignment of the type cannot be
trusted.
rdar://10464621
llvm-svn: 145300
than ABI alignment. These are loads / stores from / to "packed" data structures.
Their alignments are intentionally under-specified.
rdar://10301431
llvm-svn: 145273
dropping weights on the floor for invokes. This was impeding my writing
further test cases for invoke when interacting with probabilities and
block placement.
No test case as there doesn't appear to be a way to test this stuff. =/
Suggestions for a test case of course welcome. I hope to be able to add
test cases that indirectly cover this eventually by adding probabilities
to the exceptional edge and reordering blocks as a result.
llvm-svn: 145060
ADDs. MaxOffs is used as a threshold to limit the size of the offset. Tradeoffs
being: (1) If we can't materialize the large constant then we'll cause fast-isel
to bail. (2) Too large of an offset can't be directly encoded in the ADD
resulting in a MOV+ADD. Generally not a bad thing because otherwise we would
have had ADD+ADD, but on Thumb this turns into a MOVS+MOVT+ADD. Working on a fix
for that. (3) Conversely, too low of a threshold we'll miss opportunities to
coalesce ADDs.
rdar://10412592
llvm-svn: 144886
for a single miss and not all predecessor instructions that get selected by
the selection DAG instruction selector. This is still not exact (e.g., over
states misses when folded/dead instructions are present), but it is a step in
the right direction.
llvm-svn: 144832
%arrayidx135 = getelementptr inbounds [4 x [4 x [4 x [4 x i32]]]]* %M0, i32 0, i64 0
%arrayidx136 = getelementptr inbounds [4 x [4 x [4 x i32]]]* %arrayidx135, i32 0, i64 %idxprom134
Prior to this commit, the GEP instruction that defines %arrayidx136 thought that
%arrayidx135 was a trivial kill. The GEP that defines %arrayidx135 doesn't
generate any code and thus %M0 gets folded into the second GEP. Thus, we need
to look through GEPs with all zero indices.
rdar://10443319
llvm-svn: 144730
instruction lower optimization" in the pre-RA scheduler.
The optimization, rather the hack, was done before MI use-list was available.
Now we should be able to implement it in a better way, perhaps in the
two-address pass until a MI scheduler is available.
Now that the scheduler has to backtrack to handle call sequences. Adding
artificial scheduling constraints is just not safe. Furthermore, the hack
is not taking all the other scheduling decisions into consideration so it's just
as likely to pessimize code. So I view disabling this optimization goodness
regardless of PR11314.
llvm-svn: 144267
dragonegg self-host buildbot will recover (it is complaining about object
files differing between different build stages). Original commit message:
Add a hack to the scheduler to disable pseudo-two-address dependencies in
basic blocks containing calls. This works around a problem in which
these artificial dependencies can get tied up in calling seqeunce
scheduling in a way that makes the graph unschedulable with the current
approach of using artificial physical register dependencies for calling
sequences. This fixes PR11314.
llvm-svn: 144188
basic blocks containing calls. This works around a problem in which
these artificial dependencies can get tied up in calling seqeunce
scheduling in a way that makes the graph unschedulable with the current
approach of using artificial physical register dependencies for calling
sequences. This fixes PR11314.
llvm-svn: 144124
Add support for trimming constants to GetDemandedBits. This fixes some funky
constant generation that occurs when stores are expanded for targets that don't
support unaligned stores natively.
llvm-svn: 144102
When this field is true it means that the load is from constant (runt-time or compile-time) and so can be hoisted from loops or moved around other memory accesses
llvm-svn: 144100
fixes: Use a separate register, instead of SP, as the
calling-convention resource, to avoid spurious conflicts with
actual uses of SP. Also, fix unscheduling of calling sequences,
which can be triggered by pseudo-two-address dependencies.
llvm-svn: 143206
it fixes the dragonegg self-host (it looks like gcc is miscompiled).
Original commit messages:
Eliminate LegalizeOps' LegalizedNodes map and have it just call RAUW
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
Delete #if 0 code accidentally left in.
llvm-svn: 143188
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
llvm-svn: 143177
trying to legalize the operand types when only the result type
is required to be legalized - the type legalization machinery
will get round to the operands later if they need legalizing.
There can be a point to legalizing operands in parallel with
the result: when this saves compile time or results in better
code. There was only one case in which this was true: when
the operand is also split, so keep the logic for that bit.
As a result of this change, additional operand legalization
methods may need to be introduced to handle nodes where the
result and operand types can differ, like SIGN_EXTEND, but
the testsuite doesn't contain any tests where this is the case.
In any case, it seems better to require such methods (and die
with an assert if they doesn't exist) than to quietly produce
wrong code if we forgot to special case the node in
SplitVecRes_UnaryOp.
llvm-svn: 143026
This code makes different decisions when compiled into x87 instructions
because of different rounding behavior. That caused phase 2/3
miscompares on 32-bit Linux when the phase 1 compiler was built with gcc
(using x87), and the phase 2 compiler was built with clang (using SSE).
This fixes PR11200.
llvm-svn: 143006
ZExtPromotedInteger and SExtPromotedInteger based on the operation we legalize.
SetCC return type needs to be legalized via PromoteTargetBoolean.
llvm-svn: 142660
When checking the availability of instructions using the TLI, a 'promoted'
instruction IS available. It means that the value is bitcasted to another type
for which there is an operation. The correct check for the availablity of an
instruction is to check if it should be expanded.
llvm-svn: 142542
svn r139159 caused SelectionDAG::getConstant() to promote BUILD_VECTOR operands
with illegal types, even before type legalization. For this testcase, that led
to one BUILD_VECTOR with i16 operands and another with promoted i32 operands,
which triggered the assertion.
llvm-svn: 142370
Some code want to check that *any* call within a function has the 'returns
twice' attribute, not just that the current function has one.
llvm-svn: 142221
This isn't put into the 'clear()' method because the information needs to stick
around (at least for a little bit) after the selection DAG is built.
llvm-svn: 142032
The inline asm operand constraint is initially encoded in the virtual
register for the operand, but that register class may change during
coalescing, and the original constraint is lost.
Encode the original register class as part of the flag word for each
inline asm operand. This makes it possible to recover the actual
constraint required by inline asm, just like we can for normal
instructions.
llvm-svn: 141833
EXTRACT_SUBREG is emitted as %dst = COPY %src:sub, so there is no need to
constrain the %dst register class. RegisterCoalescer will apply the
necessary constraints if it decides to eliminate the COPY.
The %src register class does need to be constrained to something with
the right sub-registers, though. This is currently done manually with
COPY_TO_REGCLASS nodes. They can possibly be removed after this patch.
llvm-svn: 141207
The register class created by INSERT_SUBREG and SUBREG_TO_REG must be
legal and support the SubIdx sub-registers.
The new getSubClassWithSubReg() hook can compute that.
This may create INSERT_SUBREG instructions defining a larger register
class than the sub-register being inserted. That is OK,
RegisterCoalescer will constrain the register class as needed when it
eliminates the INSERT_SUBREG instructions.
llvm-svn: 141198
and the alignment is 0 (i.e., it's defined globally in one file and declared in
another file) it could get an alignment which is larger than the ABI allows for
that type, resulting in aligned moves being used for unaligned loads.
For instance, in file A.c:
struct S s;
In file B.c:
struct {
// something long
};
extern S s;
void foo() {
struct S p = s;
// ...
}
this copy is a 'memcpy' which is turned into a series of 'movaps' instructions
on X86. But this is wrong, because 'struct S' has alignment of 4, not 16.
llvm-svn: 140902
This intrinsic is used to pass the index of the function context to the back-end
for further processing. The back-end is in charge of filling in the rest of the
entries.
llvm-svn: 140676
SDNodes may return values which are wider than the incoming element types. In
this patch we fix the integer promotion of these nodes.
Fixes spill-q.ll when running -promote-elements.
llvm-svn: 140471
(this is always the case for scalars), otherwise use the promoted result type.
Fix test/CodeGen/X86/vsplit-and.ll when promote-elements is enabled.
llvm-svn: 140464
When generating the trunc-store of i1's, we need to use the vector type and not
the scalar type.
This patch fixes the assertion in CodeGen/Generic/bool-vector.ll when
running with -promote-elements.
llvm-svn: 140463
DecomposeMERGE_VALUES to "know" that results are legalized in
a particular order, by passing it the number of the result
being legalized (the type legalization core provides this, it
just needs to be passed on).
llvm-svn: 140373
integer-promotion of CONCAT_VECTORS.
Test: test/CodeGen/X86/widen_shuffle-1.ll
This patch fixes the above tests (when running in with -promote-elements).
llvm-svn: 140372
Sometimes register class constraints are trivial, like GR32->GR32_NOSP,
or GPR->rGPR. Teach InstrEmitter to simply constrain the virtual
register instead of emitting a copy in these cases.
Normally, these copies are handled by the coalescer. This saves some
coalescer work.
llvm-svn: 140340
This is still a hack until we can teach tblgen to generate the
optional CPSR operand rather than an implicit CPSR def. But the
strangeness is now limited to the selection DAG. ADD/SUB MI's no
longer have implicit CPSR defs, nor do we allow flag setting variants
of these opcodes in machine code. There are several corner cases to
consider, and getting one wrong would previously lead to nasty
miscompilation. It's not the first time I've debugged one, so this
time I added enough verification to ensure it won't happen again.
llvm-svn: 140228
No functionality change. The hook makes it explicit which patterns
require "special" handling. i.e. it self-documents tblgen
deficiencies. I plan to add verification in ExpandISelPseudos and
Thumb2SizeReduce to catch any missing hasPostISelHooks. Otherwise it's
too fragile.
llvm-svn: 140160
Modified ARMISelLowering::AdjustInstrPostInstrSelection to handle the
full gamut of CPSR defs/uses including instructins whose "optional"
cc_out operand is not really optional. This allowed removal of the
hasPostISelHook to simplify the .td files and make the implementation
more robust.
Fixes rdar://10137436: sqlite3 miscompile
llvm-svn: 140134
(The fix for the related failures on x86 is going to be nastier because we actually need Acquire memoperands attached to the atomic load instrs, etc.)
llvm-svn: 139221
with a vector condition); such selects become VSELECT codegen nodes.
This patch also removes VSETCC codegen nodes, unifying them with SETCC
nodes (codegen was actually often using SETCC for vector SETCC already).
This ensures that various DAG combiner optimizations kick in for vector
comparisons. Passes dragonegg bootstrap with no testsuite regressions
(nightly testsuite as well as "make check-all"). Patch mostly by
Nadav Rotem.
llvm-svn: 139159
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
llvm-svn: 139140
If we have a chain of zext -> assert_zext -> zext -> use, the first zext would get simplified away because of the later zext, and then the later zext would get simplified away because of the assert. The solution is to teach SimplifyDemandedBits that assert_zext demands all of the high bits of its input, rather than only those demanded by its users. No testcase because the only example I have manifests as llvm-gcc miscompiling LLVM, and I haven't found a smaller case that reproduces this problem.
Fixes <rdar://problem/10063365>.
llvm-svn: 139059
to be unreliable on platforms which require memcpy calls, and it is
complicating broader legalize cleanups. It is hoped that these cleanups
will make memcpy byval easier to implement in the future.
llvm-svn: 138977
Added canClobberReachingPhysRegUse() to handle a particular pattern in
which a two-address instruction could be forced to interfere with
EFLAGS, causing a compare to be unnecessarilly cloned.
Fixes rdar://problem/5875261
llvm-svn: 138924
Add a instruction flag: hasPostISelHook which tells the pre-RA scheduler to
call a target hook to adjust the instruction. For ARM, this is used to
adjust instructions which may be setting the 's' flag. ADC, SBC, RSB, and RSC
instructions have implicit def of CPSR (required since it now uses CPSR physical
register dependency rather than "glue"). If the carry flag is used, then the
target hook will *fill in* the optional operand with CPSR. Otherwise, the hook
will remove the CPSR implicit def from the MachineInstr.
llvm-svn: 138810
I don't really like the patterns, but I'm having trouble coming up with a
better way to handle them.
I plan on making other targets use the same legalization
ARM-without-memory-barriers is using... it's not especially efficient, but
if anyone cares, it's not that hard to fix for a given target if there's
some better lowering.
llvm-svn: 138621
the intent seems to be to terminate even in Release builds, just use abort()
directly.
If program flow ever reaches a __builtin_unreachable (which llvm_unreachable is
#define'd to on newer GCCs) then the program is undefined.
llvm-svn: 138068
The landingpad instruction is lowered into the EXCEPTIONADDR and EHSELECTION
SDNodes. The information from the landingpad instruction is harvested by the
'AddLandingPadInfo' function. The new EH uses the current EH scheme in the
back-end. This will change once we switch over to the new scheme. (Reviewed by
Jakob!)
llvm-svn: 137880
This generates the SDNodes for the new exception handling scheme. It takes the
two values coming from the landingpad instruction and assigns them to the
EXCEPTIONADDR and EHSELECTION nodes.
llvm-svn: 137873
This implements the 'landingpad' instruction. It's used to indicate that a basic
block is a landing pad. There are several restrictions on its use (see
LangRef.html for more detail). These restrictions allow the exception handling
code to gather the information it needs in a much more sane way.
This patch has the definition, implementation, C interface, parsing, and bitcode
support in it.
llvm-svn: 137501
This adds the 'resume' instruction class, IR parsing, and bitcode reading and
writing. The 'resume' instruction resumes propagation of an existing (in-flight)
exception whose unwinding was interrupted with a 'landingpad' instruction (to be
added later).
llvm-svn: 136589
working on x86 (at least for trivial testcases); other architectures will
need more work so that they actually emit the appropriate instructions for
orderings stricter than 'monotonic'. (As far as I can tell, the ARM, PPC,
Mips, and Alpha backends need such changes.)
llvm-svn: 136457
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
llvm-svn: 136433
This generates the correct SDNodes for the landingpad instruction. It makes an
assumption that the result of the landingpad instruction has at least two
values. And that the first value is a pointer to the exception object and the
second value is the "selector."
llvm-svn: 136430
'atomicrmw' instructions, which allow representing all the current atomic
rmw intrinsics.
The allowed operands for these instructions are heavily restricted at the
moment; we can probably loosen it a bit, but supporting general
first-class types (where it makes sense) might get a bit complicated,
given how SelectionDAG works.
As an initial cut, these operations do not support specifying an alignment,
but it would be possible to add if we think it's useful. Specifying an
alignment lower than the natural alignment would be essentially
impossible to support on anything other than x86, but specifying a greater
alignment would be possible. I can't think of any useful optimizations which
would use that information, but maybe someone else has ideas.
Optimizer/codegen support coming soon.
llvm-svn: 136404
when determining validity of matching constraint. Allow i1
types access to the GR8 reg class for x86.
Fixes PR10352 and rdar://9777108
llvm-svn: 135180
During type legalization we often use the SIGN_EXTEND_INREG SDNode.
When this SDNode is legalized during the LegalizeVector phase, it is
scalarized because non-simple types are automatically marked to be expanded.
In this patch we add support for lowering SIGN_EXTEND_INREG manually.
This fixes CodeGen/X86/vec_sext.ll when running with the '-promote-elements'
flag.
llvm-svn: 135144
We have to do this in DAGBuilder instead of DAGCombiner, because the exact bit is lost after building.
struct foo { char x[24]; };
long bar(struct foo *a, struct foo *b) { return a-b; }
is now compiled into
movl 4(%esp), %eax
subl 8(%esp), %eax
sarl $3, %eax
imull $-1431655765, %eax, %eax
instead of
movl 4(%esp), %eax
subl 8(%esp), %eax
movl $715827883, %ecx
imull %ecx
movl %edx, %eax
shrl $31, %eax
sarl $2, %edx
addl %eax, %edx
movl %edx, %eax
llvm-svn: 134695
hasPredecessorHelper function allows predecessors to be cached to speed up
repeated invocations. This fixes PR10186.
X.isPredecessorOf(Y) now just calls Y.hasPredecessor(X)
Y.hasPredecessor(X) calls Y.hasPredecessorHelper(X, Visited, Worklist) with
empty Visited and Worklist sets (i.e. no caching over invocations).
Y.hasPredecessorHelper(X, Visited, Worklist) caches search state in Visited
and Worklist to speed up repeated calls. The Visited set is searched for X
before going to the worklist to further search the DAG if necessary.
llvm-svn: 134592
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
llvm-svn: 134021
Removed the check that peeks past EXTRA_SUBREG, which I don't think
makes sense any more. Intead treat it as a normal register def. No
significant affect on x86 or ARM benchmarks.
llvm-svn: 133917
Both become <earlyclobber> defs on the INLINEASM MachineInstr, but we
now use two different asm operand kinds.
The new Kind_Clobber is treated identically to the old
Kind_RegDefEarlyClobber for now, but x87 floating point stack inline
assembly does care about the difference.
This will pop a register off the stack:
asm("fstp %st" : : "t"(x) : "st");
While this will pop the input and push an output:
asm("fst %st" : "=&t"(r) : "t"(x));
We need to know if ST0 was a clobber or an output operand, and we can't
depend on <dead> flags for that.
llvm-svn: 133902
1. (((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)
=> (bswap x) >> 16
2. ((x&0xff)<<8)|((x&0xff00)>>8)|((x&0xff000000)>>8)|((x&0x00ff0000)<<8))
=> (rotl (bswap x) 16)
This allows us to eliminate most of the def : Pat patterns for ARM rev16
revsh instructions. It catches many more cases for ARM and x86.
rdar://9609108
llvm-svn: 133503
In Thumb mode we cannot handle GPR virtual registers, even though some
instructions can. When isel is lowering a CopyFromReg, it should limit
itself to subclasses of getRegClassFor(VT).
<rdar://problem/9624323>
llvm-svn: 133210
BranchProbabilityInfo (expect setEdgeWeight which is not available here).
Branch Weights are kept in MachineBasicBlocks. To turn off this analysis
set -use-mbpi=false.
llvm-svn: 133184
This is intended to support using REG_SEQUENCE SDNode's with type MVT::untyped, and is part of the long road to eliminating some of the hacks we currently use to support register pairs and other strange constraints, particularly on ARM NEON.
llvm-svn: 133178
This virtual function will replace allocation_order_begin/end as the one
to override when implementing custom allocation orders. It is simpler to
have one function return an ArrayRef than having two virtual functions
computing different ends of the same array.
Use getRawAllocationOrder() in place of allocation_order_begin() where
it makes sense, but leave some clients that look like they really want
the filtered allocation orders from RegisterClassInfo.
llvm-svn: 133170
GetDemandBits (which must operate on the vector element type).
Fix the a usage of getZeroExtendInReg which must also be done on scalar types.
llvm-svn: 133052
converted to add x,x if x is a undef. add undef, undef does not guarantee
that the resulting low order bit is zero.
Fixes <rdar://problem/9453156> and <rdar://problem/9487392>.
llvm-svn: 133022
types (with power of two types such as 8,16,32 .. 512).
Fix a bug in the integer promotion of bitcast nodes. Enable integer expanding
only if the target of the conversion is an integer (when the type action is
scalarize).
Add handling to the legalization of vector load/store in cases where the saved
vector is integer-promoted.
llvm-svn: 132985
Instead of scalarizing, and doing an element-by-element truncat, use vector
truncate.
Add support for scalarization of vectors: i8 -> <1 x i1> (from Duncan's
testcase).
llvm-svn: 132892
The potential DAGCombine which enforces this more generally messes up some other very fragile patterns, so I'm leaving that alone, at least for now.
llvm-svn: 132809
I've been sitting on this long enough trying to find a test case. I
think the fix should go in now, but I'll keep working on the test case.
llvm-svn: 132701
(only happens when using the -promote-elements option).
The correct legalization order is to first try to promote element. Next, we try
to widen vectors.
llvm-svn: 132648
patch we add a flag to enable a new type legalization decision - to promote
integer elements in vectors. Currently, the rest of the codegen does not support
this kind of legalization. This flag will be removed when the transition is
complete.
llvm-svn: 132394
This patch does not change the behavior of the type legalizer. The codegen
produces the same code.
This infrastructural change is needed in order to enable complex decisions
for vector types (needed by the vector-select patch).
llvm-svn: 132263
The practical effects here are that x86-64 fast-isel can now handle trunc from i8 to i1, and ARM fast-isel can handle many more constructs involving integers narrower than 32 bits (including loads, stores, and many integer casts).
rdar://9437928 .
llvm-svn: 132099
non-zero.
- Teach X86 cmov optimization to eliminate the cmov from ctlz, cttz extension
when the source of X86ISD::BSR / X86ISD::BSF is proven to be non-zero.
rdar://9490949
llvm-svn: 131948
by non-CMP expressions. The executable test case (129821) would test
this as well, if we had an "-O0 -disable-arm-fast-isel" LLVM-GCC
tester. Alas, the ARM assembly would be very difficult to check with
FileCheck.
The thumb2-cbnz.ll test is affected; it generates larger code (tst.w
vs. cmp #0), but I believe the new version is correct.
rdar://problem/9298790
llvm-svn: 131261
If there is a store after the load node, then there is a chain, which means
that there is another user. Thus, asking hasOneUser would fail. Instead we
ask hasNUsesOfValue on the 'data' value.
llvm-svn: 131183
intrinsic call. This prevents it from being reordered so that it appears
*before* the setjmp intrinsic (thus making it completely useless).
<rdar://problem/9409683>
llvm-svn: 131174
more callee-saved registers and introduce copies. Only allows it if scheduling
a node above calls would end up lessen register pressure.
Call operands also has added ABI restrictions for register allocation, so be
extra careful with hoisting them above calls.
rdar://9329627
llvm-svn: 130245
fix bugs exposed by the gcc dejagnu testsuite:
1. The load may actually be used by a dead instruction, which
would cause an assert.
2. The load may not be used by the current chain of instructions,
and we could move it past a side-effecting instruction. Change
how we process uses to define the problem away.
llvm-svn: 130018
On x86 this allows to fold a load into the cmp, greatly reducing register pressure.
movzbl (%rdi), %eax
cmpl $47, %eax
->
cmpb $47, (%rdi)
This shaves 8k off gcc.o on i386. I'll leave applying the patch in README.txt to Chris :)
llvm-svn: 130005
manually and pass all (now) 4 arguments to the mul libcall. Add a new
ExpandLibCall for just this (copied gratuitously from type legalization).
Fixes rdar://9292577
llvm-svn: 129842
2. implement rdar://9289501 - fast isel should fold trivial multiplies to shifts
3. teach tblgen to handle shift immediates that are different sizes than the
shifted operands, eliminating some code from the X86 fast isel backend.
4. Have FastISel::SelectBinaryOp use (the poorly named) FastEmit_ri_ function
instead of FastEmit_ri to simplify code.
llvm-svn: 129666
less trivial things) into a dummy lea. Before we generated:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
leaq (%rax), %rax
ret
now we produce:
_test: ## @test
movq _G@GOTPCREL(%rip), %rax
ret
This is part of rdar://9289558
llvm-svn: 129662
The basic issue here is that bottom-up isel is matching the branch
and compare, and was failing to fold the load into the branch/compare
combo. Fixing this (by allowing folding into any instruction of a
sequence that is selected) allows us to produce things like:
cmpb $0, 52(%rax)
je LBB4_2
instead of:
movb 52(%rax), %cl
cmpb $0, %cl
je LBB4_2
This makes the generated -O0 code run a bit faster, but also speeds up
compile time by putting less pressure on the register allocator and
generating less code.
This was one of the biggest classes of missing load folding. Implementing
this shrinks 176.gcc's c-decl.s (as a random example) by about 4% in (verbose-asm)
line count.
llvm-svn: 129656
This is done by pushing physical register definitions close to their
use, which happens to handle flag definitions if they're not glued to
the branch. This seems to be generally a good thing though, so I
didn't need to add a target hook yet.
The primary motivation is to generate code closer to what people
expect and rule out missed opportunity from enabling macro-op
fusion. As a side benefit, we get several 2-5% gains on x86
benchmarks. There is one regression:
SingleSource/Benchmarks/Shootout/lists slows down be -10%. But this is
an independent scheduler bug that will be tracked separately.
See rdar://problem/9283108.
Incidentally, pre-RA scheduling is only half the solution. Fixing the
later passes is tracked by:
<rdar://problem/8932804> [pre-RA-sched] on x86, attempt to schedule CMP/TEST adjacent with condition jump
Fixes:
<rdar://problem/9262453> Scheduler unnecessary break of cmp/jump fusion
llvm-svn: 129508
Additional fixes:
Do something reasonable for subtargets with generic
itineraries by handle node latency the same as for an empty
itinerary. Now nodes default to unit latency unless an itinerary
explicitly specifies a zero cycle stage or it is a TokenFactor chain.
Original fixes:
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make the ndoe latency adjustments work, I also
needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129421
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make these heuristic adjustments to node latency work,
I also needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
llvm-svn: 129383
induction variable. The preRA scheduler is unaware of induction vars,
so we look for potential "virtual register cycles" instead.
Fixes <rdar://problem/8946719> Bad scheduling prevents coalescing
llvm-svn: 129100
It needed to be moved closer to the setjmp statement, because the code directly
after the setjmp needs to know about values that are on the stack. Also, the
'bitcast' of the function context was causing a dead load. This wouldn't be too
horrible, except that at -O0 it wasn't optimized out, and because it wasn't
using the correct base pointer (if there is a VLA), it would try to access a
value from a garbage address.
<rdar://problem/9130540>
llvm-svn: 128873
transformations in target-specific DAG combines without causing DAGCombiner to
delete the same node twice. If you know of a better way to avoid this (see my
next patch for an example), please let me know.
llvm-svn: 128758
It couldn't be used outside of the file because SDISelAsmOperandInfo
is local to SelectionDAGBuilder.cpp. Making it a static function avoids
a weird linkage dance.
llvm-svn: 128342
so the scheduler can't create new interferences on the copies
themselves. Prior to this fix the scheduler could get stuck in a loop
creating copies.
Fixes PR9509.
llvm-svn: 128164
I'm tired of doing this manually for each checkout.
If anyone knows a better way debug isel for non-trivial tests feel
free to revert and let me know how to do it.
llvm-svn: 128132
not have native support for this operation (such as X86).
The legalized code uses two vector INT_TO_FP operations and is faster
than scalarizing.
llvm-svn: 127951
rather than an int. Thankfully, this only causes LLVM to miss optimizations, not
generate incorrect code.
This just fixes the zext at the return. We still insert an i32 ZextAssert when
reading a function's arguments, but it is followed by a truncate and another i8
ZextAssert so it is not optimized.
llvm-svn: 127766
flexible.
If it returns a register class that's different from the input, then that's the
register class used for cross-register class copies.
If it returns a register class that's the same as the input, then no cross-
register class copies are needed (normal copies would do).
If it returns null, then it's not at all possible to copy registers of the
specified register class.
llvm-svn: 127368
with this before since none of the register tracking or nightly tests
had unschedulable nodes.
This should probably be refixed with a special default Node that just
returns some "don't touch me" values.
Fixes PR9427
llvm-svn: 127263
regs. This is the only change in this checkin that may affects the
default scheduler. With better register tracking and heuristics, it
doesn't make sense to artificially lower the register limit so much.
Added -sched-high-latency-cycles and X86InstrInfo::isHighLatencyDef to
give the scheduler a way to account for div and sqrt on targets that
don't have an itinerary. It is currently defaults to 10 (the actual
number doesn't matter much), but only takes effect on non-default
schedulers: list-hybrid and list-ilp.
Added several heuristics that can be individually disabled for the
non-default sched=list-ilp mode. This helps us determine how much
better we can do on a given benchmark than the default
scheduler. Certain compute intensive loops run much faster in this
mode with the right set of heuristics, and it doesn't seem to have
much negative impact elsewhere. Not all of the heuristics are needed,
but we still need to experiment to decide which should be disabled by
default for sched=list-ilp.
llvm-svn: 127067
type after type legalization has completed. Before then it may simply not be big
enough to hold the shift amount, particularly on x86 which uses a very small type
for shifts (this issue broke stuff in the past which is why LegalizeTypes carefully
uses a large type for shift amounts).
llvm-svn: 127000
Fix the PendingQueue, then disable it because it's not required for
the current schedulers' heuristics.
Fix the logic for the unused list-ilp scheduler.
llvm-svn: 126981
it. It's been assumed up til now that it would be in its immediate
successor. However, this isn't necessarily the case. It could be in one of its
successor's successors.
Modify the code to more thoroughly check for an 'eh.selector' call in
successors. It only looks at a successor if we get there as a result of an
unconditional branch.
Testcase ObjC/exceptions-4.m in r126968.
llvm-svn: 126969
David Greene changed CannotYetSelect() to print the full DAG including multiple
copies of operands reached through different paths in the DAG. Unfortunately
this blows up exponentially in some cases. The depth limit of 100 is way too
high to prevent this -- I'm seeing a message string of 150MB with a depth of
only 40 in one particularly bad case, even though the DAG has less than 200
nodes. Part of the problem is that the printing code is following chain
operands, so if you fail to select an operation with a chain, the printer will
follow all the chained operations back to the entry node.
llvm-svn: 126899
1. Inform users of ADDEs with two 0 operands that it never sets carry
2. Fold other ADDs or ADDCs into the ADDE if possible
It would be neat if we could do the same thing for SETCC+ADD eventually, but we can't do that in target independent code.
llvm-svn: 126557
is possible to do better if the high bit is set in either KnownZero/KnownOne, but
in practice NumSignBits is always 1 when we are zero extending because nothing
is known about that register.
llvm-svn: 126465
Limit the folding of any_ext and sext into the load operation to scalars.
Limit the active-bits trunc optimization to scalars.
Document vector trunc and vector sext in LangRef.
Similar to commit 126080 (for enabling zext).
llvm-svn: 126424
registers at phis. This enables us to eliminate a lot of pointless zexts during
the DAGCombine phase. This fixes <rdar://problem/8760114>.
llvm-svn: 126380
In other words, do not keep track of argument's location. The debugger (gdb) is not prepared to see line table entries for arguments. For the debugger, "second" line table entry marks beginning of function body.
This requires some coordination with debugger to get this working.
- The debugger needs to be aware of prolog_end attribute attached with line table entries.
- The compiler needs to accurately mark prolog_end in line table entries (at -O0 and at -O1+)
llvm-svn: 126155
The DAGCombiner folds the zext into complex load instructions. This patch
prevents this optimization on vectors since none of the supported targets
knows how to perform load+vector_zext in one instruction.
llvm-svn: 126080
the time but presumably my email got lost). Examples where the previous logic
got it wrong: (1) a signed i8 multiply of 64 by 2 overflows, but the high part is
zero; (2) a signed i8 multiple of -128 by 2 overflows, but the high part is all
ones.
llvm-svn: 125748
transformation if we can't legally create a build vector of the correct
type. Check that we can make the transformation first, and add a TODO to
refactor this code with similar cases.
Fixes: PR9223 and rdar://9000350
llvm-svn: 125631
have their low bits set to zero. This allows us to optimize
out explicit stack alignment code like in stack-align.ll:test4 when
it is redundant.
Doing this causes the code generator to start turning FI+cst into
FI|cst all over the place, which is general goodness (that is the
canonical form) except that various pieces of the code generator
don't handle OR aggressively. Fix this by introducing a new
SelectionDAG::isBaseWithConstantOffset predicate, and using it
in places that are looking for ADD(X,CST). The ARM backend in
particular was missing a lot of addressing mode folding opportunities
around OR.
llvm-svn: 125470
generating i8 shift amounts for things like i1024 types. Add
an assert in getNode to prevent this from occuring in the future,
fix the buggy transformation, revert my previous patch, and
document this gotcha in ISDOpcodes.h
llvm-svn: 125465
The DAGCombiner created illegal BUILD_VECTOR operations.
The patch added a check that either illegal operations are
allowed or that the created operation is legal.
llvm-svn: 125435
The bug happens when the DAGCombiner attempts to optimize one of the patterns
of the SUB opcode. It tries to create a zero of type v2i64. This type is legal
on 32bit machines, but the initializer of this vector (i64) is target dependent.
Currently, the initializer attempts to create an i64 zero constant, which fails.
Added a flag to tell the DAGCombiner to create a legal zero, if we require that
the pass would generate legal types.
llvm-svn: 125391
precisely track pressure on a selection DAG, but we can at least keep
it balanced. This design accounts for various interesting aspects of
selection DAGS: register and subregister copies, glued nodes, dead
nodes, unused registers, etc.
Added SUnit::NumRegDefsLeft and ScheduleDAGSDNodes::RegDefIter.
Note: I disabled PrescheduleNodesWithMultipleUses when register
pressure is enabled, based on no evidence other than I don't think it
makes sense to have both enabled.
llvm-svn: 124853
the load, then it may be legal to transform the load and store to integer
load and store of the same width.
This is done if the target specified the transformation as profitable. e.g.
On arm, this can transform:
vldr.32 s0, []
vstr.32 s0, []
to
ldr r12, []
str r12, []
rdar://8944252
llvm-svn: 124708
This happens all the time when a smul is promoted to a larger type.
On x86-64 we now compile "int test(int x) { return x/10; }" into
movslq %edi, %rax
imulq $1717986919, %rax, %rax
movq %rax, %rcx
shrq $63, %rcx
sarq $34, %rax <- used to be "shrq $32, %rax; sarl $2, %eax"
addl %ecx, %eax
This fires 96 times in gcc.c on x86-64.
llvm-svn: 124559
This happens e.g. for code like "X - X%10" where we lower the modulo operation
to a series of multiplies and shifts that are then subtracted from X, leading to
this missed optimization.
llvm-svn: 124532
default implementation for x86, going through the stack in a similr
fashion to how the codegen implements BUILD_VECTOR. Eventually this
will get matched to VINSERTF128 if AVX is available.
llvm-svn: 124307
implementation of EXTRACT_SUBVECTOR for x86, going through the stack
in a similr fashion to how the codegen implements BUILD_VECTOR.
Eventually this will get matched to VEXTRACTF128 if AVX is available.
llvm-svn: 124292
clang's -Wuninitialized-experimental warning.
While these don't look like real bugs, clang's
-Wuninitialized-experimental analysis is stricter
than GCC's, and these fixes have the benefit
of being general nice cleanups.
llvm-svn: 124073
DAG. Disable using "-disable-sched-cycles".
For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.
Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
operations can have their latency covered. i.e. two independent 4
cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
latency-based stalls on their uses will be prioritized by depth before height
(height is irrelevant if no stalls occur in the schedule below this point).
llvm-svn: 123971
flags. They are still not enable in this revision.
Added TargetInstrInfo::isZeroCost() to fix a fundamental problem with
the scheduler's model of operand latency in the selection DAG.
Generalized unit tests to work with sched-cycles.
llvm-svn: 123969
to add/sub by doing the normal operation and then checking for overflow
afterwards. This generally relies on the DAG handling the later invalid
operations as well.
Fixes the 64-bit part of rdar://8622122 and rdar://8774702.
llvm-svn: 123908
Added a check for already live regs before claiming HighRegPressure.
Fixed a few cases of checking the wrong number of successors.
Added some tracing until these heuristics are better understood.
llvm-svn: 123892
with an invalid type then split the result and perform the overflow check
normally.
Fixes the 32-bit parts of rdar://8622122 and rdar://8774702.
llvm-svn: 123864
This shaves off 4 popcounts from the hacked 186.crafty source.
This is enabled even when a native popcount instruction is available. The
combined code is one operation longer but it should be faster nevertheless.
llvm-svn: 123621
http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel
In a silly microbenchmark on a 65 nm core2 this is 1.5x faster than the old
code in 32 bit mode and about 2x faster in 64 bit mode. It's also a lot shorter,
especially when counting 64 bit population on a 32 bit target.
I hope this is fast enough to replace Kernighan-style counting loops even when
the input is rather sparse.
llvm-svn: 123547
disabled in this checkin. Sorry for the large diffs due to
refactoring. New functionality is all guarded by EnableSchedCycles.
Scheduling the isel DAG is inherently imprecise, but we give it a best
effort:
- Added MayReduceRegPressure to allow stalled nodes in the queue only
if there is a regpressure need.
- Added BUHasStall to allow checking for either dependence stalls due to
latency or resource stalls due to pipeline hazards.
- Added BUCompareLatency to encapsulate and standardize the heuristics
for minimizing stall cycles (vs. reducing register pressure).
- Modified the bottom-up heuristic (now in BUCompareLatency) to
prioritize nodes by their depth rather than height. As long as it
doesn't stall, height is irrelevant. Depth represents the critical
path to the DAG root.
- Added hybrid_ls_rr_sort::isReady to filter stalled nodes before
adding them to the available queue.
Related Cleanup: most of the register reduction routines do not need
to be templates.
llvm-svn: 123468
There's an inherent tension in DAGCombine between assuming
that things will be put in canonical form, and the Depth
mechanism that disables transformations when recursion gets
too deep. It would not surprise me if there's a lot of little
bugs like this one waiting to be discovered. The mechanism
seems fragile and I'd suggest looking at it from a design viewpoint.
llvm-svn: 123191
Print virtual registers numbered from 0 instead of the arbitrary
FirstVirtualRegister. The first virtual register is printed as %vreg0.
TRI::NoRegister is printed as %noreg.
llvm-svn: 123107
Instead encode llvm IR level property "HasSideEffects" in an operand (shared
with IsAlignStack). Added MachineInstrs::hasUnmodeledSideEffects() to check
the operand when the instruction is an INLINEASM.
This allows memory instructions to be moved around INLINEASM instructions.
llvm-svn: 123044
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
llvm-svn: 122995
We were never generating any of these nodes with variable indices, and there
was one legalizer function asserting on a non-constant index. If we ever have
a need to support variable indices, we can add this back again.
llvm-svn: 122993
up freebsd bootloader. However, this doesn't make much sense for Darwin, whose
-Os is meant to optimize for size only if it doesn't hurt performance.
rdar://8821501
llvm-svn: 122936
This allows us to compile:
void test(char *s, int a) {
__builtin_memset(s, a, 15);
}
into 1 mul + 3 stores instead of 3 muls + 3 stores.
llvm-svn: 122710
We could implement a DAGCombine to turn x * 0x0101 back into logic operations
on targets that doesn't support the multiply or it is slow (p4) if someone cares
enough.
Example code:
void test(char *s, int a) {
__builtin_memset(s, a, 4);
}
before:
_test: ## @test
movzbl 8(%esp), %eax
movl %eax, %ecx
shll $8, %ecx
orl %eax, %ecx
movl %ecx, %eax
shll $16, %eax
orl %ecx, %eax
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
after:
_test: ## @test
movzbl 8(%esp), %eax
imull $16843009, %eax, %eax ## imm = 0x1010101
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
llvm-svn: 122707
DAG scheduling during isel. Most new functionality is currently
guarded by -enable-sched-cycles and -enable-sched-hazard.
Added InstrItineraryData::IssueWidth field, currently derived from
ARM itineraries, but could be initialized differently on other targets.
Added ScheduleHazardRecognizer::MaxLookAhead to indicate whether it is
active, and if so how many cycles of state it holds.
Added SchedulingPriorityQueue::HasReadyFilter to allowing gating entry
into the scheduler's available queue.
ScoreboardHazardRecognizer now accesses the ScheduleDAG in order to
get information about it's SUnits, provides RecedeCycle for bottom-up
scheduling, correctly computes scoreboard depth, tracks IssueCount, and
considers potential stall cycles when checking for hazards.
ScheduleDAGRRList now models machine cycles and hazards (under
flags). It tracks MinAvailableCycle, drives the hazard recognizer and
priority queue's ready filter, manages a new PendingQueue, properly
accounts for stall cycles, etc.
llvm-svn: 122541
In the bottom-up selection DAG scheduling, handle two-address
instructions that read/write unspillable registers. Treat
the entire chain of two-address nodes as a single live range.
llvm-svn: 122472
loads properly. We miscompiled the testcase into:
_test: ## @test
movl $128, (%rdi)
movzbl 1(%rdi), %eax
ret
Now we get a proper:
_test: ## @test
movl $128, (%rdi)
movsbl (%rdi), %eax
movzbl %ah, %eax
ret
This fixes PR8757.
llvm-svn: 122392
count operand. These should be the same but apparently are
not always, and this is cleaner anyway. This improves the
code in an existing test.
llvm-svn: 122354
ARM (and other 32-bit-only) targets support for i8 and i16 overflow
multiplies. The generated code isn't great, but this at least fixes
CodeGen/Generic/overflow.ll when running on ARM hosts.
llvm-svn: 122221
Imagine we see:
EFLAGS = inst1
EFLAGS = inst2 FLAGS
gpr = inst3 EFLAGS
Previously, we would refuse to schedule inst2 because it clobbers
the EFLAGS of the predecessor. However, it also uses the EFLAGS
of the predecessor, so it is safe to emit. SDep edges ensure that
the right order happens already anyway.
This fixes 2 testsuite crashes with the X86 patch I'm going to
commit next.
llvm-svn: 122211
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
llvm-svn: 122102
when the wider type is legal. This allows us to compile:
define zeroext i16 @test1(i16 zeroext %x) nounwind {
entry:
%div = udiv i16 %x, 33
ret i16 %div
}
into:
test1: # @test1
movzwl 4(%esp), %eax
imull $63551, %eax, %eax # imm = 0xF83F
shrl $21, %eax
ret
instead of:
test1: # @test1
movw $-1985, %ax # imm = 0xFFFFFFFFFFFFF83F
mulw 4(%esp)
andl $65504, %edx # imm = 0xFFE0
movl %edx, %eax
shrl $5, %eax
ret
Implementing rdar://8760399 and example #4 from:
http://blog.regehr.org/archives/320
We should implement the same thing for [su]mul_hilo, but I don't
have immediate plans to do this.
llvm-svn: 121696
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
llvm-svn: 121120
legalization time. Since at legalization time there is no mapping from
SDNode back to the corresponding LLVM instruction and the return
SDNode is target specific, this requires a target hook to check for
eligibility. Only x86 and ARM support this form of sibcall optimization
right now.
rdar://8707777
llvm-svn: 120501
so don't claim they are. They are allocated using DAG.getNode, so attempts
to access MemSDNode fields results in reading off the end of the allocated
memory. This fixes crashes with "llc -debug" due to debug code trying to
print MemSDNode fields for these barrier nodes (since the crashes are not
deterministic, use valgrind to see this). Add some nasty checking to try
to catch this kind of thing in the future.
llvm-svn: 119901
if the extension types were not the same. The result was that if you
fed a select with sext and zext loads, as in the testcase, then it
would get turned into a zext (or sext) of the select, which is wrong
in the cases when it should have been an sext (resp. zext). Reported
and diagnosed by Sebastien Deldon.
llvm-svn: 119728
catastrophic compilation time in the event of unreasonable LLVM
IR. Code quality is a separate issue--someone upstream needs to do a
better job of reducing to llvm.memcpy. If the situation can be reproduced with
any supported frontend, then it will be a separate bug.
llvm-svn: 118904
to perform the copy, which may be of lots of memory [*]. It would be good if the
fall-back code generated something reasonable, i.e. did the copy in a loop, rather
than vast numbers of loads and stores. Add a note about this. Currently target
specific code seems to always kick in so this is more of a theoretical issue rather
than a practical one now that X86 has been fixed.
[*] It's amazing how often people pass mega-byte long arrays by copy...
llvm-svn: 118275
value type, so there is no point in passing it around using
an EVT. Use the simpler MVT everywhere. Rather than trying
to propagate this information maximally in all the code that
using the calling convention stuff, I chose to do a mainly
low impact change instead.
llvm-svn: 118167
1. Fix pre-ra scheduler so it doesn't try to push instructions above calls to
"optimize for latency". Call instructions don't have the right latency and
this is more likely to use introduce spills.
2. Fix if-converter cost function. For ARM, it should use instruction latencies,
not # of micro-ops since multi-latency instructions is completely executed
even when the predicate is false. Also, some instruction will be "slower"
when they are predicated due to the register def becoming implicit input.
rdar://8598427
llvm-svn: 118135
operand and one of them has a single use that is a live out copy, favor the
one that is live out. Otherwise it will be difficult to eliminate the copy
if the instruction is a loop induction variable update. e.g.
BB:
sub r1, r3, #1
str r0, [r2, r3]
mov r3, r1
cmp
bne BB
=>
BB:
str r0, [r2, r3]
sub r3, r3, #1
cmp
bne BB
This fixed the recent 256.bzip2 regression.
llvm-svn: 117675
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
llvm-svn: 116820
allow target to correctly compute latency for cases where static scheduling
itineraries isn't sufficient. e.g. variable_ops instructions such as
ARM::ldm.
This also allows target without scheduling itineraries to compute operand
latencies. e.g. X86 can return (approximated) latencies for high latency
instructions such as division.
- Compute operand latencies for those defined by load multiple instructions,
e.g. ldm and those used by store multiple instructions, e.g. stm.
llvm-svn: 115755
having to do a double cast (uint64_t --> double --> float). This is based on the algorithm from compiler_rt's __floatundisf
for X86-64.
llvm-svn: 115634
// %a = ...
// %b = and i32 %a, 2
// %c = srl i32 %b, 1
// brcond i32 %c ...
//
// into
//
// %a = ...
// %b = and i32 %a, 2
// %c = setcc eq %b, 0
// brcond %c ...
Make sure it restores local variable N1, which corresponds to the condition operand if it fails to match.
This apparently breaks TCE but since that backend isn't in the tree I don't have a test for it.
llvm-svn: 115571
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
llvm-svn: 115243
edited during emission.
If the basic block ends in a switch that gets lowered to a jump table, any
phis at the default edge were getting updated wrong. The jump table data
structure keeps a pointer to the header blocks that wasn't getting updated
after the MBB is split.
This bug was exposed on 32-bit Linux when disabling critical edge splitting in
codegen prepare.
The fix is to uipdate stale MBB pointers whenever a block is split during
emission.
llvm-svn: 115191
when the unconditional branch destination is the fallthrough block. The
canonicalization makes it easier to allow optimizations on DAGs to invert
conditional branches. The branch folding pass (and AnalyzeBranch) will clean up
the unnecessary unconditional branches later.
This is one of the patches leading up to disabling codegen prepare critical edge
splitting.
llvm-svn: 114630
that complex patterns are matched after the entire pattern has
a structural match, therefore the NodeStack isn't in a useful
state when the actual call to the matcher happens.
llvm-svn: 114489
I think I've audited all uses, so it should be dependable for address spaces,
and the pointer+offset info should also be accurate when there.
llvm-svn: 114464
CombinerAA cannot assume that different FrameIndex's never alias, but can instead use
MachineFrameInfo to get the actual offsets of these slots and check for actual aliasing.
This fixes CodeGen/X86/2010-02-19-TailCallRetAddrBug.ll and CodeGen/X86/tailcallstack64.ll
when CombinerAA is enabled, modulo a different register allocation sequence.
llvm-svn: 114348
NO path to the destination containing side effects, not that SOME path contains no side effects.
In practice, this only manifests with CombinerAA enabled, because otherwise the chain has little
to no branching, so "any" is effectively equivalent to "all".
llvm-svn: 114268
take multiple cycles to decode.
For the current if-converter clients (actually only ARM), the instructions that
are predicated on false are not nops. They would still take machine cycles to
decode. Micro-coded instructions such as LDM / STM can potentially take multiple
cycles to decode. If-converter should take treat them as non-micro-coded
simple instructions.
llvm-svn: 113570
Since mem2reg isn't run at -O0, we get a ton of reloads from the stack,
for example, before, this code:
int foo(int x, int y, int z) {
return x+y+z;
}
used to compile into:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
movl 4(%rsp), %esi
addl %edx, %esi
movl (%rsp), %edx
addl %esi, %edx
movl %edx, %eax
addq $12, %rsp
ret
Now we produce:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
addl 4(%rsp), %edx ## Folded load
addl (%rsp), %edx ## Folded load
movl %edx, %eax
addq $12, %rsp
ret
Fewer instructions and less register use = faster compiles.
llvm-svn: 113102
solve the root problem, but it corrects the bug in the code I added to
support legalizing in the case where the non-extended type is also legal.
llvm-svn: 112997
there are clearly no stores between the load and the store. This fixes
this miscompile reported as PR7833.
This breaks the test/CodeGen/X86/narrow_op-2.ll optimization, which is
safe, but awkward to prove safe. Move it to X86's README.txt.
llvm-svn: 112861
expanding: e.g. <2 x float> -> <4 x float> instead of -> 2 floats. This
affects two places in the code: handling cross block values and handling
function return and arguments. Since vectors are already widened by
legalizetypes, this gives us much better code and unblocks x86-64 abi
and SPU abi work.
For example, this (which is a silly example of a cross-block value):
define <4 x float> @test2(<4 x float> %A) nounwind {
%B = shufflevector <4 x float> %A, <4 x float> undef, <2 x i32> <i32 0, i32 1>
%C = fadd <2 x float> %B, %B
br label %BB
BB:
%D = fadd <2 x float> %C, %C
%E = shufflevector <2 x float> %D, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
ret <4 x float> %E
}
Now compiles into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
addps %xmm0, %xmm0
ret
previously it compiled into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
pshufd $1, %xmm0, %xmm1
## kill: XMM0<def> XMM0<kill> XMM0<def>
insertps $0, %xmm0, %xmm0
insertps $16, %xmm1, %xmm0
addps %xmm0, %xmm0
ret
This implements rdar://8230384
llvm-svn: 112101
hierarchy with virtual methods and using llvm_unreachable to properly indicate
unreachable states which would otherwise leave variables uninitialized.
llvm-svn: 111803
it involves specific floating-point types, legalize should expand an
extending load to a non-extending load followed by a separate extend operation.
For example, we currently expand SEXTLOAD to EXTLOAD+SIGN_EXTEND_INREG (and
assert that EXTLOAD should always be supported). Now we can expand that to
LOAD+SIGN_EXTEND. This is needed to allow vector SIGN_EXTEND and ZERO_EXTEND
to be used for NEON.
llvm-svn: 111586
protectors, to be near the stack protectors on the stack. Accomplish this by
tagging the stack object with a predicate that indicates that it would trigger
this. In the prolog-epilog inserter, assign these objects to the stack after the
stack protector but before the other objects.
llvm-svn: 109481
appropriate for targets without detailed instruction iterineries.
The scheduler schedules for increased instruction level parallelism in
low register pressure situation; it schedules to reduce register pressure
when the register pressure becomes high.
On x86_64, this is a win for all tests in CFP2000. It also sped up 256.bzip2
by 16%.
llvm-svn: 109300
it's too late to start backing off aggressive latency scheduling when most
of the registers are in use so the threshold should be a bit tighter.
- Correctly handle live out's and extract_subreg etc.
- Enable register pressure aware scheduling by default for hybrid scheduler.
For ARM, this is almost always a win on # of instructions. It's runtime
neutral for most of the tests. But for some kernels with high register
pressure it can be a huge win. e.g. 464.h264ref reduced number of spills by
54 and sped up by 20%.
llvm-svn: 109279
I am assured by people more knowledgeable than me that there are no rounding issues in eliminating this.
This fixed <rdar://problem/8197504>.
llvm-svn: 108639
since it doesn't work for front-ends which don't emit column information
(which includes llvm-gcc in its present configuration), and doesn't
work for clang for K&R style variables where the variables are declared
in a different order from the parameter list.
Instead, make a separate pass through the instructions to collect the
llvm.dbg.declare instructions in order. This ensures that the debug
information for variables is emitted in this order.
llvm-svn: 108538
occasions, caused code to be generated in a different order.
All cases I've seen involved float softening in the type
legalizer, and this could be perhaps be fixed there, but
it's better not to generate things differently in the first
place. 7797940 (6/29/2010..7/15/2010).
llvm-svn: 108484
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
llvm-svn: 108473
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
llvm-svn: 108465
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
llvm-svn: 108072
The remaining copyRegToReg calls actually check the return value (shock!), so we
cannot trivially replace them with COPY instructions.
llvm-svn: 108069
if a block is split (by a custom inserter), the insert point may be in a
different block than it was originally. This fixes 32-bit llvm-gcc
bootstrap builds, and I haven't been able to reproduce it otherwise.
llvm-svn: 108060
ScheduleDAGEmit, TwoAddressLowering, and PHIElimination.
This switches the bulk of register copies to using COPY, but many less used
copyRegToReg calls remain.
llvm-svn: 108050
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
llvm-svn: 108039
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 107987
disabled and then never turned back on again. Adjust some tests, one because
this change avoids an unnecessary instruction, and the other to make it
continue testing what it was intended to test.
llvm-svn: 107941
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
llvm-svn: 107879
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
llvm-svn: 107791
PrologEpilog code, and use it to determine whether
the asm forces stack alignment or not. gcc consistently
does not do this for GCC-style asms; Apple gcc inconsistently
sometimes does it for asm blocks. There is no
convenient place to put a bit in either the SDNode or
the MachineInstr form, so I've added an extra operand
to each; unlovely, but it does allow for expansion for
more bits, should we need it. PR 5125. Some
existing testcases are affected.
The operand lists of the SDNode and MachineInstr forms
are indexed with awesome mnemonics, like "2"; I may
fix this someday, but not now. I'm not making it any
worse. If anyone is inspired I think you can find all
the right places from this patch.
llvm-svn: 107506
of getPhysicalRegisterRegClass with it.
If we want to make a copy (or estimate its cost), it is better to use the
smallest class as more efficient operations might be possible.
llvm-svn: 107140
have to be registers, per gcc documentation. This affects
the logic for determining what "g" should lower to. PR 7393.
A couple of existing testcases are affected.
llvm-svn: 107079
for an "i" constraint should get lowered; PR 6309. While
this argument was passed around a lot, this is the only
place it was used, so it goes away from a lot of other
places.
llvm-svn: 106893
when the condition is constant. This optimization shouldn't be
necessary, because codegen shouldn't be able to find dead control
paths that the IR-level optimizer can't find. And it's undesirable,
because it encourages bugpoint to leave "br i1 false" branches
in its output. And it wasn't updating the CFG.
I updated all the tests I could, but some tests are too reduced
and I wasn't able to meaningfully preserve them.
llvm-svn: 106748
atomic intrinsics, either because the use locking instructions for the
atomics, or because they perform the locking directly. Add support in the
DAG combiner to fold away the fences.
llvm-svn: 106630
Split the code for materializing a value out of
SelectionDAGBuilder::getValue into a helper function, so that it can
be used in other ways. Add a new getNonRegisterValue function which
uses it, for use in code which doesn't want a CopyFromReg even
when FuncMap.ValueMap already has an entry for it.
llvm-svn: 106422
entries used by llvm-gcc. *_[U]MIN and such can be added later if needed.
This enables the front ends to simplify handling of the atomic intrinsics by
removing the target-specific decision about which targets can handle the
intrinsics.
llvm-svn: 106321
switch from this:
if (TimePassesIsEnabled) {
NamedRegionTimer T(Name, GroupName);
do_something();
} else {
do_something(); // duplicate the code, this time without a timer!
}
to this:
{
NamedRegionTimer T(Name, GroupName, TimePassesIsEnabled);
do_something();
}
llvm-svn: 106285
addresses a longstanding deficiency noted in many FIXMEs scattered
across all the targets.
This effectively moves the problem up one level, replacing eleven
FIXMEs in the targets with eight FIXMEs in CodeGen, plus one path
through FastISel where we actually supply a DebugLoc, fixing Radar
7421831.
llvm-svn: 106243
for the moment. The implementation of the libcall will follow.
Currently, the llvm-gcc knows when the intrinsics can be correctly handled by
the back end and only generates them in those cases, issuing libcalls directly
otherwise. That's too much coupling. The intrinsics should always be
generated and the back end decide how to handle them, be it with a libcall,
inline code, or whatever. This patch is a step in that direction.
rdar://8097623
llvm-svn: 106227
This is a bit of a hack to make inline asm look more like call instructions.
It would be better to produce correct dead flags during isel.
llvm-svn: 105749
replace an OpA with a widened OpB, it is possible to get new uses of OpA due to CSE
when recursively updating nodes. Since OpA has been processed, the new uses are
not examined again. The patch checks if this occurred and it it did, updates the
new uses of OpA to use OpB.
llvm-svn: 105453
expansion is the same as that used by LegalizeDAG.
The resulting code sucks in terms of performance/codesize on x86-32 for a
64-bit operation; I haven't looked into whether different expansions might be
better in general.
llvm-svn: 105378
that are too large. This causes the freebsd bootloader to be too
large apparently.
It's unclear if this should be an -Os or -Oz thing. Thoughts welcome.
llvm-svn: 105228
implementing pop with a linear search for a "best" element. The priority
queue was a neat idea, but in practice the comparison functions depend
on dynamic information.
llvm-svn: 104718
Mon Ping provided; unfortunately bugpoint failed to
reduce it, but I think it's important to have a test for
this in the suite. 8023512.
llvm-svn: 104624
so that it will continue to test what it was meant to test when I commit a
separate change for better support of BUILD_VECTOR and VECTOR_SHUFFLE for Neon.
Fix a DAG combiner crash exposed by this test change.
llvm-svn: 104380
pipeline stall. It's useful for targets like ARM cortex-a8. NEON has a lot
of long latency instructions so a strict register pressure reduction
scheduler does not work well.
Early experiments show this speeds up some NEON loops by over 30%.
llvm-svn: 104216
need to be promoted. The BUILD_VECTOR and EXTRACT_VECTOR_ELT nodes generated
here already allow the promoted type to be used without further changes, so
just do the promotion. This fixes part of pr7167.
llvm-svn: 104141
The trouble arises when the result of a vector cmp + sext is then and'ed with all ones. Instcombine will turn it into a vector cmp + zext, dag combiner will miss turning it into a vsetcc and hell breaks loose after that.
Teach dag combine to turn a vector cpm + zest into a vsetcc + and 1. This fixes rdar://7923010.
llvm-svn: 104094
The implementation in LegalizeIntegerTypes to handle this as
sint64->float + appropriate power of 2 is subject to double rounding,
considered incorrect by numerics people. Use this implementation only
when it is safe. This leads to using library calls in some cases
that produced inline code before, but it's correct now.
(EVTToAPFloatSemantics belongs somewhere else, any suggestions?)
Add a correctly rounding (though not particularly fast) conversion
that uses X87 80-bit computations for x86-32.
7885399, 5901940. This shows up in gcc.c-torture/execute/ieee/rbug.c
in the gcc testsuite on some platforms.
llvm-svn: 103883
the variable actually tracks.
N.B., several back-ends are using "HasCalls" as being synonymous for something
that adjusts the stack. This isn't 100% correct and should be looked into.
llvm-svn: 103802
Move EmitTargetCodeForMemcpy, EmitTargetCodeForMemset, and
EmitTargetCodeForMemmove out of TargetLowering and into
SelectionDAGInfo to exercise this.
llvm-svn: 103481
getConstantFP to accept the two supported long double
target types. This was not the original intent, but
there are other places that assume this works and it's
easy enough to do.
llvm-svn: 103299
code, and to eliminate the need for the SelectionDAGBuilder
state to be live during CodeGenAndEmitDAG calls.
Call SDB->clear() before CodeGenAndEmitDAG calls instead of
before it, and move the CurDAG->clear() out of SelectionDAGBuilder,
which doesn't own the DAG, and into CodeGenAndEmitDAG.
llvm-svn: 102814
indexes could be of a different value type. Or not even using the same SDNode
for the constant (weird, I know). Compare the actual values instead of the
pointers.
llvm-svn: 102791
of the dbg testsuite regressions. I don't think this is
really the right fix; this change exposed an existing problem
upstream somewhere.
llvm-svn: 102410
form of DEBUG_VALUE, as it doesn't have reasonable default
behavior for unsupported targets. Add a new hook instead.
No functional change.
llvm-svn: 102320
FunctionLoweringInfo, as it isn't SelectionDAG-specific. This isn't
completely natural, as PHI node state is not per-function but rather
per-basic-block, however there's currently no other convenient
per-basic-block state to group it with.
llvm-svn: 102109
user-defined operations that use MMX register types, but
the compiler shouldn't generate them on its own. This adds
a Synthesizable abstraction to represent this, and changes
the vector widening computation so it won't produce MMX types.
(The motivation is to remove noise from the ABI compatibility
part of the gcc test suite, which has some breakage right now.)
llvm-svn: 101951
into SelectionDAGBuilder. This avoids a separate pass over the
instructions, and has the side effect of providing debug location
information to the copy.
llvm-svn: 101906
const_casts, and it reinforces the design of the Target classes being
immutable.
SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.
And PIC16's AsmPrinter no longer uses TargetLowering.
llvm-svn: 101635
with a fix for self-hosting
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101465
with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101397
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101364
This doesn't occur much at all, it only seems to formed in the case
when the trunc optimization kicks in due to phase ordering. In that
case it is saves a few bytes on x86-32.
llvm-svn: 101350
a load/or/and/store sequence into a narrower store when it is
safe. Daniel tells me that clang will start producing this sort
of thing with bitfields, and this does trigger a few dozen times
on 176.gcc produced by llvm-gcc even now.
This compiles code like CodeGen/X86/2009-05-28-DAGCombineCrash.ll
into:
movl %eax, 36(%rdi)
instead of:
movl $4294967295, %eax ## imm = 0xFFFFFFFF
andq 32(%rdi), %rax
shlq $32, %rcx
addq %rax, %rcx
movq %rcx, 32(%rdi)
and each of the testcases into a single store. Each of them used
to compile into craziness like this:
_test4:
movl $65535, %eax ## imm = 0xFFFF
andl (%rdi), %eax
shll $16, %esi
addl %eax, %esi
movl %esi, (%rdi)
ret
llvm-svn: 101343
so the user at least knows what inline asm is a problem. For example:
error: inline asm not supported yet: don't know how to handle tied indirect register inputs
pr8788-1.c:14:10: note: generated from here
asm ("\n" : "+r" (stack->regs)
^
Instead of:
fatal error: error in backend: Don't know how to handle tied indirect register inputs yet!
llvm-svn: 100731
1. Introduce some enums and accessors in the InlineAsm class
that eliminate a ton of magic numbers when handling inline
asm SDNode.
2. Add a new MDNodeSDNode selection dag node type that holds
a MDNode (shocking!)
3. Add a new argument to ISD::INLINEASM nodes that hold !srcloc
metadata, propagating it to the instruction emitter, which
drops it.
No functionality change.
llvm-svn: 100605
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100304
representation. This eliminates the 'DILocation' MDNodes for
file/line/col tuples from -O0 -g codegen.
This remove the old DebugLoc class, making it a typedef for DebugLoc,
I'll rename NewDebugLoc next.
I didn't update the JIT to use the new apis, so it will continue to
work, but be as slow as before. Someone should eventually do this
or, better yet, rip out the JIT debug info stuff and build the JIT
on top of MC.
llvm-svn: 100209
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100191
1. Makes it possible to lower with floating point loads and stores.
2. Avoid unaligned loads / stores unless it's fast.
3. Fix some memcpy lowering logic bug related to when to optimize a
load from constant string into a constant.
4. Adjust x86 memcpy lowering threshold to make it more sane.
5. Fix x86 target hook so it uses vector and floating point memory
ops more effectively.
rdar://7774704
llvm-svn: 100090
instructions. In addition to being a convenience,
they are faster than the old apis, particularly when
not going from an MDKindID like people should be
doing.
llvm-svn: 99982
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
llvm-svn: 99928
and those derived from them. These are obnoxious because
they were written as: PatLeaf<(bitconvert). Not having an
argument was foiling adding better type checking for operand
count matching up with what was required (in this case,
bitconvert always requires an operand!)
llvm-svn: 99759
the custom insertion hook deletes the instruction, then we try to set dead
flags on it. Neither the code that I added nor the code that was there
before was safe.
llvm-svn: 99538
bytes instead of one byte. This is important because
we're running up to too many opcodes to fit in a byte
and it is aggrevated by FIRST_TARGET_MEMORY_OPCODE
making the numbering sparse. This just bites the
bullet and bloats out the table. In practice, this
increases the size of the x86 isel table from 74.5K
to 76K. I think we'll cope :)
This fixes rdar://7791648
llvm-svn: 99494
happening.
Enhance scheduling to set the DEAD flag on implicit defs
more aggressively. Before, we'd set an implicit def operand
to dead if it were present in the SDNode corresponding to
the machineinstr but had no use. Now we do it in this case
AND if the implicit def does not exist in the SDNode at all.
This exposes a couple of problems: one is the FIXME, which
causes a live intervals crash on CodeGen/X86/sibcall.ll.
The second is that it makes machinecse and licm more
aggressive (which is a good thing) but also exposes a case
where licm hoists a set0 and then it doesn't get resunk.
Talking to codegen folks about both these issues, but I need
this patch in in the meantime.
llvm-svn: 99485
Here is a theoretical example that illustrates why the placement is important.
tmp1 =
store tmp1 -> x
...
tmp2 = add ...
...
call
...
store tmp2 -> x
Now mem2reg comes along:
tmp1 =
dbg_value (tmp1 -> x)
...
tmp2 = add ...
...
call
...
dbg_value (tmp2 -> x)
When the debugger examine the value of x after the add instruction but before the call, it should have the value of tmp1.
Furthermore, for dbg_value's that reference constants, they should not be emitted at the beginning of the block (since they do not have "producers").
This patch also cleans up how SDISel manages DbgValue nodes. It allow a SDNode to be referenced by multiple SDDbgValue nodes. When a SDNode is deleted, it uses the information to find the SDDbgValues and invalidate them. They are not deleted until the corresponding SelectionDAG is destroyed.
llvm-svn: 99469
always create a new jump table. The intention was to avoid merging jump
tables in SelectionDAGBuilder, and to wait for the branch folding pass to
merge tables. Unfortunately, the same getJumpTableIndex() method is also
used to merge tables in branch folding, so as a result of this change
branch tables are never merged. Worse, the branch folding code is expecting
getJumpTableIndex to always return the index of an existing table, but with
this change, it never does so. In at least some cases, e.g., pr6543, this
creates references to non-existent tables.
I've fixed the problem by adding a new createJumpTableIndex function, which
will always create a new table, and I've changed getJumpTableIndex to only
look at existing tables.
llvm-svn: 98845
an MCSymbol. Make the EH_LABEL MachineInstr hold its label
with an MCSymbol instead of ID. Fix a bug in MMI.cpp which
would return labels named "Label4" instead of "label4".
llvm-svn: 98463
instead of label ID's. This cleans up and regularizes a bunch
of code and makes way for future progress.
Unfortunately, this pointed out to me that JITDwarfEmitter.cpp
is largely copy and paste from DwarfException/MachineModuleInfo
and other places. This is very sad and disturbing. :(
One major change here is that TidyLandingPads moved from being
called in DwarfException::BeginFunction to being called in
DwarfException::EndFunction. There should not be any
functionality change from doing this, but I'm not an EH expert.
llvm-svn: 98459
(it seems that FreeBSD doesn't have copysignl). Done by
removing a bunch of assumptions from the code. This may also
help with sparc 128 bit floats.
llvm-svn: 98346
node which has a flag. That flag in turn was used by an
already-selected adde which turned into an ADC32ri8 which
used a selected load which was chained to the load we
folded. This flag use caused us to form a cycle. Fix
this by not ignoring chains in IsLegalToFold even in
cases where the isel thinks it can.
llvm-svn: 97791
as the very last thing before node emission. This should
dramatically reduce the number of times we do 'MatchAddress'
on X86, speeding up compile time. This also improves comments
in the tables and shrinks the table a bit, now down to
80506 bytes for x86.
llvm-svn: 97703
CSE and recursive RAUW calls delete a node from the use list,
invalidating the use list iterator. There's currently no known
way to reproduce this in an unmodified LLVM, however there's no
fundamental reason why a SelectionDAG couldn't be formed which
would trigger this case.
llvm-svn: 97665
entry we're about to process is obviously going to fail, don't
bother pushing a scope only to have it immediately be popped.
This avoids a lot of scope stack traffic in common cases.
Unfortunately, this requires duplicating some of the predicate
dispatch. To avoid duplicating the actual logic I pulled each
predicate out to its own static function which gets used in
both places.
llvm-svn: 97651
SwitchOpcodeMatcher) and have DAGISelMatcherOpt form it. This
speeds up selection, particularly for X86 which has lots of
variants of instructions with only type differences.
llvm-svn: 97645
long test(long x) { return (x & 123124) | 3; }
Currently compiles to:
_test:
orl $3, %edi
movq %rdi, %rax
andq $123127, %rax
ret
This is because instruction and DAG combiners canonicalize
(or (and x, C), D) -> (and (or, D), (C | D))
However, this is only profitable if (C & D) != 0. It gets in the way of the
3-addressification because the input bits are known to be zero.
llvm-svn: 97616
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
llvm-svn: 97596
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
llvm-svn: 97561
DoInstructionSelection. Inline "SelectRoot" into it from DAGISelHeader.
Sink some other stuff out of DAGISelHeader into SDISel.
Eliminate the various 'Indent' stuff from various targets, which dates
to when isel was recursive.
17 files changed, 114 insertions(+), 430 deletions(-)
llvm-svn: 97555
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
llvm-svn: 97539
ComplexPattern at the root be generated multiple times, once
for each opcode they are part of. This encourages factoring
because the opcode checks get treated just like everything
else in the matcher.
llvm-svn: 97439
to a scope where every child starts with a CheckOpcode, but
executes more efficiently. Enhance DAGISelMatcherOpt to
form it.
This also fixes a bug in CheckOpcode: apparently the SDNodeInfo
objects are not pointer comparable, we have to compare the
enum name.
llvm-svn: 97438
terms of store and load, which means bitcasting between scalar
integer and vector has endian-specific results, which undermines
this whole approach.
llvm-svn: 97137
the number of value bits, not the number of bits of allocation for in-memory
storage.
Make getTypeStoreSize and getTypeAllocSize work consistently for arrays and
vectors.
Fix several places in CodeGen which compute offsets into in-memory vectors
to use TargetData information.
This fixes PR1784.
llvm-svn: 97064
necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
llvm-svn: 97025
to adding them in a determinstic order (bottom up from
the root) based on the structure of the graph itself.
This updates tests for some random changes, interesting
bits: CodeGen/Blackfin/promote-logic.ll no longer crashes.
I have no idea why, but that's good right?
CodeGen/X86/2009-07-16-LoadFoldingBug.ll also fails, but
now compiles to have one fewer constant pool entry, making
the expected load that was being folded disappear. Since it
is an unreduced mass of gnast, I just removed it.
This fixes PR6370
llvm-svn: 97023
no id's would cause early exit allowing IsLegalToFold to return true
instead of false, producing a cyclic dag.
This was striking the new isel because it isn't using SelectNodeTo yet,
which theoretically is just an optimization.
llvm-svn: 96972
dragonegg self-host build. I reverted 96640 in order to revert
96556 (96640 goes on top of 96556), but it also looks like with
both of them applied the breakage happens even earlier. The
symptom of the 96556 miscompile is the following crash:
llvm[3]: Compiling AlphaISelLowering.cpp for Release build
cc1plus: /home/duncan/tmp/tmp/llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:4982: void llvm::SelectionDAG::ReplaceAllUsesWith(llvm::SDNode*, llvm::SDNode*, llvm::SelectionDAG::DAGUpdateListener*): Assertion `(!From->hasAnyUseOfValue(i) || From->getValueType(i) == To->getValueType(i)) && "Cannot use this version of ReplaceAllUsesWith!"' failed.
Stack dump:
0. Running pass 'X86 DAG->DAG Instruction Selection' on function '@_ZN4llvm19AlphaTargetLowering14LowerOperationENS_7SDValueERNS_12SelectionDAGE'
g++: Internal error: Aborted (program cc1plus)
This occurs when building LLVM using LLVM built by LLVM (via
dragonegg). Probably LLVM has miscompiled itself, though it
may have miscompiled GCC and/or dragonegg itself: at this point
of the self-host build, all of GCC, LLVM and dragonegg were built
using LLVM. Unfortunately this kind of thing is extremely hard
to debug, and while I did rummage around a bit I didn't find any
smoking guns, aka obviously miscompiled code.
Found by bisection.
r96556 | evancheng | 2010-02-18 03:13:50 +0100 (Thu, 18 Feb 2010) | 5 lines
Some dag combiner goodness:
Transform br (xor (x, y)) -> br (x != y)
Transform br (xor (xor (x,y), 1)) -> br (x == y)
Also normalize (and (X, 1) == / != 1 -> (and (X, 1)) != / == 0 to match to "test on x86" and "tst on arm"
r96640 | evancheng | 2010-02-19 01:34:39 +0100 (Fri, 19 Feb 2010) | 16 lines
Transform (xor (setcc), (setcc)) == / != 1 to
(xor (setcc), (setcc)) != / == 1.
e.g. On x86_64
%0 = icmp eq i32 %x, 0
%1 = icmp eq i32 %y, 0
%2 = xor i1 %1, %0
br i1 %2, label %bb, label %return
=>
testl %edi, %edi
sete %al
testl %esi, %esi
sete %cl
cmpb %al, %cl
je LBB1_2
llvm-svn: 96672
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
llvm-svn: 96255
lowering and requires that certain types exist in ValueTypes.h. Modified widening to
check if an op can trap and if so, the widening algorithm will apply only the op on
the defined elements. It is safer to do this in widening because the optimizer can't
guarantee removing unused ops in some cases.
llvm-svn: 95823
into TargetOpcodes.h. #include the new TargetOpcodes.h
into MachineInstr. Add new inline accessors (like isPHI())
to MachineInstr, and start using them throughout the
codebase.
llvm-svn: 95687
type is the same as the element type of the vector. EXTRACT_VECTOR_ELT can
be used to extended the width of an integer type. This fixes a bug for
Generic/vector-casts.ll on a ppc750.
llvm-svn: 94990
"visit*" method is called, take the newly created nodes, walk them in a DFS
fashion, and if they don't have an ordering set, then give it one.
llvm-svn: 94757
This allows code gen and the exception table writer to cooperate to make sure
landing pads are associated with the correct invoke locations.
llvm-svn: 94726
Target independent isel should always pass along the "tail call" property. Change
target hook LowerCall's parameter "isTailCall" into a refernce. If the target
decides it's impossible to honor the tail call request, it should set isTailCall
to false to make target independent isel happy.
llvm-svn: 94626
which is more convenient, and change getPICJumpTableRelocBaseExpr
to take a MachineFunction to match.
Next, move the X86 code that create a PICBase symbol to
X86TargetLowering::getPICBaseSymbol from
X86MCInstLower::GetPICBaseSymbol, which was an asmprinter specific
library. This eliminates a 'gross hack', and allows us to
implement X86ISelLowering::getPICJumpTableRelocBaseExpr which now
calls it.
This in turn allows us to eliminate the
X86AsmPrinter::printPICJumpTableSetLabel method, which was the
only overload of printPICJumpTableSetLabel.
llvm-svn: 94526
1. MachineJumpTableInfo is now created lazily for a function the first time
it actually makes a jump table instead of for every function.
2. The encoding of jump table entries is now described by the
MachineJumpTableInfo::JTEntryKind enum. This enum is determined by the
TLI::getJumpTableEncoding() hook, instead of by lots of code scattered
throughout the compiler that "knows" that jump table entries are always
32-bits in pic mode (for example).
3. The size and alignment of jump table entries is now calculated based on
their kind, instead of at machinefunction creation time.
Future work includes using the EntryKind in more places in the compiler,
eliminating other logic that "knows" the layout of jump tables in various
situations.
llvm-svn: 94470
the '-pre-RA-sched' flag. It actually makes more sense to do it this way. Also,
keep track of the SDNode ordering by default. Eventually, we would like to make
this ordering a way to break a "tie" in the scheduler. However, doing that now
breaks the "CodeGen/X86/abi-isel.ll" test for 32-bit Linux.
llvm-svn: 94308
missing ones are libsupport, libsystem and libvmcore. libvmcore is
currently blocked on bugpoint, which uses EH. Once it stops using
EH, we can switch it off.
This #if 0's out 3 unit tests, because gtest requires RTTI information.
Suggestions welcome on how to fix this.
llvm-svn: 94164
comments (fast isel, X86). This doesn't seem
to break any functionality, but will introduce
cases where -g affects the generated code. I'll
be fixing that.
llvm-svn: 93811
Instcombine does this but apparently there are situations where this pattern will escape the optimizer and / or created by isel. Here is a case that's seen in JavaScriptCore:
%t1 = sub i32 0, %a
%t2 = add i32 %t1, -1
The dag combiner pattern: ((c1-A)+c2) -> (c1+c2)-A
will fold it to -1 - %a.
llvm-svn: 93773
print/dumpWithDepth allows one to dump a DAG up to N levels deep.
dump/printWithFullDepth prints the whole DAG, subject to a depth limit
on 100 in the default case (to prevent infinite recursion).
Have CannotYetSelect to a dumpWithFullDepth so it is clearer exactly
what the non-matching DAG looks like.
llvm-svn: 93538
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
It also strips old llvm.dbg.declare intrinsics that did not pass metadata as the first argument.
llvm-svn: 93531
really does need to be a vector type, because
TargetLowering::getOperationAction for SIGN_EXTEND_INREG uses that type,
and it needs to be able to distinguish between vectors and scalars.
Also, fix some more issues with legalization of vector casts.
llvm-svn: 93043
When folding a and(any_ext(load)) both the any_ext and the
load have to have only a single use.
This removes the anyext-uses.ll testcase which started failing
because it is unreduced and unclear what it is testing.
llvm-svn: 92950
(OP (trunc x), (trunc y)) -> (trunc (OP x, y))
Unfortunately this simple change causes dag combine to infinite looping. The problem is the shrink demanded ops optimization tend to canonicalize expressions in the opposite manner. That is badness. This patch disable those optimizations in dag combine but instead it is done as a late pass in sdisel.
This also exposes some deficiencies in dag combine and x86 setcc / brcond lowering. Teach them to look pass ISD::TRUNCATE in various places.
llvm-svn: 92849
clear what information these functions are actually using.
This is also a micro-optimization, as passing a SDNode * around is
simpler than passing a { SDNode *, int } by value or reference.
llvm-svn: 92564
(X != null) | (Y != null) --> (X|Y) != 0
(X == null) & (Y == null) --> (X|Y) == 0
so that instcombine can stop doing this for pointers. This is part of PR3351,
which is a case where instcombine doing this for pointers (inserting ptrtoint)
is pessimizing code.
llvm-svn: 92406
multiply sequence when the power is a constant integer. Before, our
codegen for std::pow(.., int) always turned into a libcall, which was
really inefficient.
This should also make many gfortran programs happier I'd imagine.
llvm-svn: 92388
getMDKindID/getMDKindNames methods to LLVMContext (and add
convenience methods to Module), eliminating MetadataContext.
Move the state that it maintains out to LLVMContext.
llvm-svn: 92259
I asked Devang to do back on Sep 27. Instead of going through the
MetadataContext class with methods like getMD() and getMDs(), just
ask the instruction directly for its metadata with getMetadata()
and getAllMetadata().
This includes a variety of other fixes and improvements: previously
all Value*'s were bloated because the HasMetadata bit was thrown into
value, adding a 9th bit to a byte. Now this is properly sunk down to
the Instruction class (the only place where it makes sense) and it
will be folded away somewhere soon.
This also fixes some confusion in getMDs and its clients about
whether the returned list is indexed by the MDID or densely packed.
This is now returned sorted and densely packed and the comments make
this clear.
This introduces a number of fixme's which I'll follow up on.
llvm-svn: 92235
compare. On other targets we end up with a call to memcmp because we don't
want 16 individual byte loads. We should be able to use movups as well, but
we're failing to select the generated icmp.
llvm-svn: 92107
SDISel. This optimization was causing simplifylibcalls to
introduce type-unsafe nastiness. This is the first step, I'll be
expanding the memcmp optimizations shortly, covering things that
we really really wouldn't want simplifylibcalls to do.
llvm-svn: 92098
return partial registers. This affected the back-end lowering code some.
Also patch up some places I missed before in the "get" functions.
llvm-svn: 91880
- Move DisableScheduling flag into TargetOption.h
- Move SDNodeOrdering into its own header file. Give it a minimal interface that
doesn't conflate construction with storage.
- Move assigning the ordering into the SelectionDAGBuilder.
This isn't used yet, so there should be no functional changes.
llvm-svn: 91727
The change in SelectionDAGBuilder is needed to allow using bitcasts to convert
between f64 (the default type for ARM "d" registers) and 64-bit Neon vector
types. Radar 7457110.
llvm-svn: 91649
LegalizeDAG.cpp. Unlike the code it replaces, which simply decrements the simple
type by one, getHalfSizedIntegerVT() searches for the smallest simple integer
type that is at least half the size of the type it is called on. This approach
has the advantage that it will continue working if a new value type (such as
i24) is added to MVT.
Also, in preparation for new value types, remove the assertions that
non-power-of-2 8-bit-mutiple types are Extended when legalizing extload and
truncstore operations.
llvm-svn: 91614
Fold (zext (and x, cst)) -> (and (zext x), cst)
DAG combiner likes to optimize expression in the other way so this would end up cause an infinite looping.
llvm-svn: 91574
1. Only perform (zext (shl (zext x), y)) -> (shl (zext x), y) when y is a constant. This makes sure it remove at least one zest.
2. If the shift is a left shift, make sure the original shift cannot shift out bits.
llvm-svn: 91399
stuff isn't used just yet.
We want to model the GCC `-fno-schedule-insns' and `-fno-schedule-insns2'
flags. The hypothesis is that the people who use these flags know what they are
doing, and have hand-optimized the C code to reduce latencies and other
conflicts.
The idea behind our scheme to turn off scheduling is to create a map "on the
side" during DAG generation. It will order the nodes by how they appeared in the
code. This map is then used during scheduling to get the ordering.
llvm-svn: 91392
Pointed out by Javier Martinez (who also provided a patch). Since
this logic is not used on (for example) x86, I guess nobody noticed.
Tested by generating SHL, SRL, SRA on various choices of i64 for all
possible shift amounts, and comparing with gcc. Since I did this on
x86-32, I had to force the use of ExpandShiftWithUnknownAmountBit.
What I'm saying here is that I don't have a testcase I can add to the
repository.
llvm-svn: 90482
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
llvm-svn: 89711
which was an expensive checks failure due to a bug in the checking. This
patch in essence reverts the original fix for PR3393, and refixes it by a
tweak to the way expensive checking is done.
llvm-svn: 89454
unconditional branches or fallthroghes. Instcombine/SimplifyCFG
should be simplifying branches with known conditions.
This fixes some problems caused by these transformations not
updating the MachineBasicBlock CFG.
llvm-svn: 89017
slots. The AsmPrinter will use this information to determine whether to
print a spill/reload comment.
Remove default argument values. It's too easy to pass a wrong argument
value when multiple arguments have default values. Make everything
explicit to trap bugs early.
Update all targets to adhere to the new interfaces..
llvm-svn: 87022
constant whose component type is not a legal type for the target.
(If the target ConstantPool cannot handle this type either, it has
an opportunity to merge elements. In practice any target with
8-bit bytes must support i8 *as data*). 7320806 (partial).
llvm-svn: 86751
- Be consistent when referring to MachineBasicBlocks: BB#0.
- Be consistent when referring to virtual registers: %reg1024.
- Be consistent when referring to unknown physical registers: %physreg10.
- Be consistent when referring to known physical registers: %RAX
- Be consistent when referring to register 0: %reg0
- Be consistent when printing alignments: align=16
- Print jump table contents.
- Don't print host addresses, in general.
- and various other cleanups.
llvm-svn: 85682
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.
llvm-svn: 85517
stack slots and giving them different PseudoSourceValue's did not fix the
problem of post-alloc scheduling miscompiling llvm itself.
- Apply Dan's conservative workaround by assuming any non fixed stack slots can
alias other memory locations. This means a load from spill slot #1 cannot
move above a store of spill slot #2.
- Enable post-alloc scheduling for x86 at optimization leverl Default and above.
llvm-svn: 84424
so get rid of eh.selector.i64 and rename eh.selector.i32 to eh.selector.
Likewise for eh.typeid.for. This aligns us with gcc, which always uses a
32 bit value for the selector on all platforms. My understanding is that
the register allocator used to assert if the selector intrinsic size didn't
match the pointer size, and this was the reason for introducing the two
variants. However my testing shows that this is no longer the case (I
fixed some bugs in selector lowering yesterday, and some more today in the
fastisel path; these might have caused the original problems).
llvm-svn: 84106
truncating an SDValue (depending on whether the target
type is bigger or smaller than the value's type); or zero
extending or truncating it. Use it in a few places (this
seems to be a popular operation, but I only modified cases
of it in SelectionDAGBuild). In particular, the eh_selector
lowering was doing this wrong due to a repeated rather than
inverted test, fixed with this change.
llvm-svn: 84027
into MachineInstrs. This is mostly just moving the code from
ScheduleDAGSDNodesEmit.cpp into a new class. This decouples MachineInstr
emitting from scheduling.
llvm-svn: 83699
While recording beginning of a function, use scope info from the first location entry instead of just relying on first location entry itself.
llvm-svn: 83684
basic blocks that are so long that their size overflows a short.
Also assert that overflow does not happen in the future, as requested by Evan.
This fixes PR4401.
llvm-svn: 83159
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
llvm-svn: 82794
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
llvm-svn: 82790
allows appropriate backends to generate a sqrt instruction.
On x86, this isn't done at -O0 because we go through
FastISel instead. This is a behavior change from before
this series of sqrt patches started. I think this is OK
considering that compile speed is most important at -O0, but
could be convinced otherwise.
llvm-svn: 82778
two different places for printing MachineMemOperands.
Drop the virtual from Value::dump and instead give Value a
protected virtual hook that can be overridden by subclasses
to implement custom printing. This lets printing be more
consistent, and simplifies printing of PseudoSourceValue
values.
llvm-svn: 82599
This can be seen on CodeGen/Generic/2006-09-06-SwitchLowering.ll. But it's not known to cause any real regression (but I have added an assertion for it now).
llvm-svn: 82214
1. Switch from an std::set to a SmallPtrSet for visited chain nodes.
2. Do not force the recursive flattening of token factor nodes, regardless of
use count.
3. Immediately process newly created TokenFactor nodes.
Also, improve combiner-aa by teaching it that loads to non-overlapping offsets
of relatively aligned objects cannot alias.
These changes result in a >5x speedup for combiner-aa on most testcases.
llvm-svn: 81816
to instructions instead of zero extended ones. This makes the asmprinter
print signed values more consistently. This apparently only really affects
the X86 backend.
llvm-svn: 81265
from floating-point to integer first, and bitcast the result
back to floating-point. Previously, this test was passing by
falling back to SelectionDAG lowering. The resulting code isn't
as nice, but it's correct and CodeGen now stays on the fast path.
llvm-svn: 81171
be of (dynamically) constant values, so races on it are immaterial. We just need
to ensure that at least one write has completed before return the pointer into it.
With this change, parllc exhibits essentially no overhead on 403.gcc.
llvm-svn: 79708
If two uses of a CopyFromReg want different regclasses, first try a common
sub-class, then fall back on the copy emitted in AddRegisterOperand. There is
no need for an assert here. The cross-class joiner usually cleans up nicely.
llvm-svn: 79193
libcall. Take advantage of this in the ARM backend to rectify broken
choice of CC when hard float is in effect. PIC16 may want to see if
it could be of use in MakePIC16Libcall, which works unchanged.
Patch by Sandeep!
llvm-svn: 79033
and short. Well, it's kinda short. Definitely nasty and brutish.
The front-end generates the register/unregister calls into the SjLj runtime,
call-site indices and landing pad dispatch. The back end fills in the LSDA
with the call-site information provided by the front end. Catch blocks are
not yet implemented.
Built on Darwin and verified no llvm-core "make check" regressions.
llvm-svn: 78625
MERGE_VALUES nodes. Replacing the result values with the
operands in one MERGE_VALUES node may cause another
MERGE_VALUES node be CSE'd with the first one, and bring
its uses along, so that the first one isn't dead, as this
code expects. Fix this by iterating until the node is
really dead. This fixes PR4699.
llvm-svn: 78619
Blackfin supports and/or/xor on i32 but not on i16. Teach
DAGCombiner::SimplifyBinOpWithSameOpcodeHands to not produce illegal nodes
after legalize ops.
llvm-svn: 78497
and high-bits values in ways that weren't correct for integer
types wider than 64 bits. This fixes a miscompile in
PPMacroExpansion.cpp in clang on x86-64.
llvm-svn: 78295
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.
This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.
This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.
llvm-svn: 78142
TLI.computeMaskedBitsForTargetNode from ComputeMaskedBits, since
the former may call back into the latter. This fixes a major
compile time problem on a testcase that happnened to hit this
in a particularly bad way, PR4643.
llvm-svn: 78023
support. This isn't immediately interesting, because Legalize
ends up lowering SELECT_CC if the target doesn't support it,
but this simplifies the process.
Also, if the SELECT_CC would be expanded in Legalize, it
can potentially end up with two copies of the condition
expression. By leaving it as SELECT+SETCC, the SELECT can be
expanded into two SELECTs that use a single SETCC.
The two comparisons are usually CSE'd, but depending on
when various expressions get legalized, the comparison
expression could involve calls to library functions, such
that the comparison expression may not be able to be CSE'd.
This will be needed by a future patch.
llvm-svn: 77896
in SelectionDAGLowering::visitTargetIntrinsic.
This removes a bit of special-case code for vector types. After staring
at it for a while, I managed to convince myself that it is not necessary.
The only case where TLI.getValueType() differs from MVT::getMVT is for iPTR,
so this code could potentially make a difference for a vector of pointers.
But, it looks like that is not supported. Calling TLI.getValueType() on
a vector of pointers leads to the following sequence of calls:
TargetLowering::getValueType
MVT::getMVT
MVT::getVectorVT(iPTR, num elements)
MVT::getExtendedVectorVT
MVT::getTypeForMVT for iPTR
assertion fails "Type is not extended!"
So, unless I'm really missing something, this bit of code is irrelevant to
the current version of LLVM, which is consistent with the fact that I don't
see this code in other similar places.
llvm-svn: 77747
shouldn't do AU.setPreservesCFG(), because even though CodeGen passes
don't modify the LLVM IR CFG, they may modify the MachineFunction CFG,
and passes like MachineLoop are registered with isCFGOnly set to true.
llvm-svn: 77691
failures when building assorted projects with clang.
--- Reverse-merging r77654 into '.':
U include/llvm/CodeGen/Passes.h
U include/llvm/CodeGen/MachineFunctionPass.h
U include/llvm/CodeGen/MachineFunction.h
U include/llvm/CodeGen/LazyLiveness.h
U include/llvm/CodeGen/SelectionDAGISel.h
D include/llvm/CodeGen/MachineFunctionAnalysis.h
U include/llvm/Function.h
U lib/Target/CellSPU/SPUISelDAGToDAG.cpp
U lib/Target/PowerPC/PPCISelDAGToDAG.cpp
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/MachineVerifier.cpp
U lib/CodeGen/MachineFunction.cpp
U lib/CodeGen/PrologEpilogInserter.cpp
U lib/CodeGen/MachineLoopInfo.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
D lib/CodeGen/MachineFunctionAnalysis.cpp
D lib/CodeGen/MachineFunctionPass.cpp
U lib/CodeGen/LiveVariables.cpp
llvm-svn: 77661
When the return value is not used (i.e. only care about the value in the memory), x86 does not have to use add to implement these. Instead, it can use add, sub, inc, dec instructions with the "lock" prefix.
This is currently implemented using a bit of instruction selection trick. The issue is the target independent pattern produces one output and a chain and we want to map it into one that just output a chain. The current trick is to select it into a merge_values with the first definition being an implicit_def. The proper solution is to add new ISD opcodes for the no-output variant. DAG combiner can then transform the node before it gets to target node selection.
Problem #2 is we are adding a whole bunch of x86 atomic instructions when in fact these instructions are identical to the non-lock versions. We need a way to add target specific information to target nodes and have this information carried over to machine instructions. Asm printer (or JIT) can use this information to add the "lock" prefix.
llvm-svn: 77582
it is highly specific to the object file that will be generated in the end,
this introduces a new TargetLoweringObjectFile interface that is implemented
for each of ELF/MachO/COFF/Alpha/PIC16 and XCore.
Though still is still a brutal and ugly refactoring, this is a major step
towards goodness.
This patch also:
1. fixes a bunch of dangling pointer problems in the PIC16 backend.
2. disables the TargetLowering copy ctor which PIC16 was accidentally using.
3. gets us closer to xcore having its own crazy target section flags and
pic16 not having to shadow sections with its own objects.
4. fixes wierdness where ELF targets would set CStringSection but not
CStringSection_. Factor the code better.
5. fixes some bugs in string lowering on ELF targets.
llvm-svn: 77294
- Some clients which used DOUT have moved to DEBUG. We are deprecating the
"magic" DOUT behavior which avoided calling printing functions when the
statement was disabled. In addition to being unnecessary magic, it had the
downside of leaving code in -Asserts builds, and of hiding potentially
unnecessary computations.
llvm-svn: 77019
%0 = malloc [3758096384 x i32]
The "malloc" instruction doesn't support 64-bits correctly (see PR715),
and should be removed. Victor is actively working on fixing this, in
the meantime just don't crash.
llvm-svn: 76899
be useful, and it's currently unused. (Some issues: it isn't actually
rich enough to capture the semantics on many architectures, and
semantics can vary depending on the type being shifted.)
llvm-svn: 76633
call to the MachineCodeEmitter interface and made copying the start
line of a function not conditional on whether we're emitting Dwarf
debug information. I'll propagate the processDebugLoc() calls to the
non-X86 targets in a followup patch.
In the long run, it'll probably be better to gather this information
through the DwarfWriter, but the DwarfWriter currently depends on the
AsmPrinter and TargetAsmInfo, and fixing that would be out of the way
for this patch.
There's a bug in OProfile 0.9.4 that makes it ignore line numbers for
addresses above 4G, and a patch fixing it at
http://thread.gmane.org/gmane.linux.oprofile/7634
Sample output:
$ sudo opcontrol --reset; sudo opcontrol --start-daemon; sudo opcontrol --start; `pwd`/Debug/bin/lli fib.bc; sudo opcontrol --stop
Signalling daemon... done
Profiler running.
fib(40) == 165580141
Stopping profiling.
$ opreport -g -d -l `pwd`/Debug/bin/lli|head -60
Overflow stats not available
CPU: Core 2, speed 1998 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask of 0x00 (Unhalted core cycles) count 100000
vma samples % linenr info image name symbol name
00007f67a30370b0 25489 61.2554 fib.c:24 10946.jo fib_left
00007f67a30370b0 1634 6.4106 fib.c:24
00007f67a30370b1 83 0.3256 fib.c:24
00007f67a30370b9 1997 7.8348 fib.c:24
00007f67a30370c6 2080 8.1604 fib.c:27
00007f67a30370c8 988 3.8762 fib.c:27
00007f67a30370cd 1315 5.1591 fib.c:27
00007f67a30370cf 251 0.9847 fib.c:27
00007f67a30370d3 1191 4.6726 fib.c:27
00007f67a30370d6 975 3.8252 fib.c:27
00007f67a30370db 1010 3.9625 fib.c:27
00007f67a30370dd 242 0.9494 fib.c:27
00007f67a30370e1 2782 10.9145 fib.c:28
00007f67a30370e5 3768 14.7828 fib.c:28
00007f67a30370eb 615 2.4128 (no location information)
00007f67a30370f3 6558 25.7287 (no location information)
00007f67a3037100 15603 37.4973 fib.c:29 10946.jo fib_right
00007f67a3037100 1646 10.5493 fib.c:29
00007f67a3037101 45 0.2884 fib.c:29
00007f67a3037109 2372 15.2022 fib.c:29
00007f67a3037116 2234 14.3178 fib.c:32
00007f67a3037118 612 3.9223 fib.c:32
00007f67a303711d 622 3.9864 fib.c:32
00007f67a303711f 385 2.4675 fib.c:32
00007f67a3037123 404 2.5892 fib.c:32
00007f67a3037126 634 4.0633 fib.c:32
00007f67a303712b 870 5.5759 fib.c:32
00007f67a303712d 62 0.3974 fib.c:32
00007f67a3037131 1848 11.8439 fib.c:33
00007f67a3037135 2840 18.2016 fib.c:33
00007f67a303713a 1 0.0064 fib.c:33
00007f67a303713b 1023 6.5564 (no location information)
00007f67a3037143 5 0.0320 (no location information)
000000000080c1e4 15 0.0360 MachineOperand.h:150 lli llvm::MachineOperand::isReg() const
000000000080c1e4 6 40.0000 MachineOperand.h:150
000000000080c1ec 2 13.3333 MachineOperand.h:150
...
llvm-svn: 76102
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
llvm-svn: 75640
This involves temporarily hard wiring some parts to use the global context. This isn't ideal, but it's
the only way I could figure out to make this process vaguely incremental.
llvm-svn: 75445
implemented in codegen, have no frontend to generate them, and are
better implemented with pattern matching (like the ppc backend does
to generate rlwimi/rlwinm etc).
PR4543
llvm-svn: 75430
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
llvm-svn: 75379
value. Adjust other code to deal with that correctly. Make
DAGTypeLegalizer::PromoteIntRes_EXTRACT_VECTOR_ELT take advantage of
this new flexibility to simplify the code and make it deal with unusual
vectors (like <4 x i1>) correctly. Fixes PR3037.
llvm-svn: 75176
nodes with operand types that differ from the result type. (This
doesn't normally happen right now, because
SelectionDAGLowering::visitShuffleVector normalizes vector shuffles.)
llvm-svn: 75081
VSETCC must define all bits, which is different than it was documented
to before. Since all targets that implement VSETCC already have this
behavior, and we don't optimize based on this, just change the
documentation. We now get nice code for vec_compare.ll
llvm-svn: 74978
as "X" constraint and "P" modifier on x86. Make this work.
(Change may not be sufficient to fix it for non-Darwin, but
I'm pretty sure it won't break anything.)
gcc.apple/asm-block-32.c
gcc.apple/asm-block-33.c
llvm-svn: 74967
With the SVR4 ABI on PowerPC, vector arguments for vararg calls are passed differently depending on whether they are a fixed or a variable argument. Variable vector arguments always go into memory, fixed vector arguments are put
into vector registers. If there are no free vector registers available, fixed vector arguments are put on the stack.
The NumFixedArgs attribute allows to decide for an argument in a vararg call whether it belongs to the fixed or variable portion of the parameter list.
llvm-svn: 74764
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
llvm-svn: 74518
the SelectionDAG::getGlobalAddress function properly looks through
aliases to determine thread-localness, but then passes the GV* down
to GlobalAddressSDNode::GlobalAddressSDNode which does not. Instead
of passing down isTarget, just pass down the predetermined node
opcode. This fixes some assertions with out of tree changes I'm
working on.
llvm-svn: 74325
to be shared, but how/where to privatize it is not immediately clear to me.
If any SelectionDAG experts see a better solution, please share!
llvm-svn: 74180
This change doubles the allowable value for MVT::LAST_VALUETYPE. It does
this by doing several things.
1. Introduces MVT::MAX_ALLOWED_LAST_VALUETYPE which in this change has a
value of 64. This value contains the current maximum for the
MVT::LAST_VALUETYPE.
2. Instead of checking "MVT::LAST_VALUETYPE <= 32", all of those uses
now become "MVT::LAST_VALUETYPE <= MVT::MAX_ALLOWED_LAST_VALUETYPE"
3. Changes the dimension of the ValueTypeActions from 2 elements to four
elements and adds comments ahead of the declaration indicating the it is
"(MVT::MAX_ALLOWED_LAST_VALUETYPE/32) * 2". This at least lets us find
what is affected if and when MVT::MAX_ALLOWED_LAST_VALUETYPE gets
changed.
4. Adds initializers for the new elements of ValueTypeActions.
This does NOT add any types in MVT. That would be done separately.
This doubles the size of ValueTypeActions from 64 bits to 128 bits and
gives us the freedom to add more types for AVX.
llvm-svn: 74110
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
llvm-svn: 73477
incomming chain of the RETURN node. The incomming chain must
be the outgoing chain of the CALL node. This causes the
backend to identify tail calls that are not tail calls. This
patch fixes this.
llvm-svn: 73387
on x86 to handle more cases. Fix a bug in said code that would cause it
to read past the end of an object. Rewrite the code in
SelectionDAGLegalize::ExpandBUILD_VECTOR to be a bit more general.
Remove PerformBuildVectorCombine, which is no longer necessary with
these changes. In addition to simplifying the code, with this change,
we can now catch a few more cases of consecutive loads.
llvm-svn: 73012
integer type to be consistent with normal operation legalization. No visible
change because nothing is actually using this at the moment.
llvm-svn: 72980
Update code generator to use this attribute and remove NoImplicitFloat target option.
Update llc to set this attribute when -no-implicit-float command line option is used.
llvm-svn: 72959
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
llvm-svn: 72957
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
llvm-svn: 72897
using Promote which won't work because i64 isn't
a legal type. It's easy enough to use Custom, but
then we have the problem that when the type
legalizer is promoting FP_TO_UINT->i16, it has no
way of telling it should prefer FP_TO_SINT->i32
to FP_TO_UINT->i32. I have uncomfortably hacked
this by making the type legalizer choose FP_TO_SINT
when both are Custom.
This fixes several regressions in the testsuite.
llvm-svn: 72891
instcombine doesn't know when it's safe. To partially compensate
for this, introduce new code to do this transformation in
dagcombine, which can use UnsafeFPMath.
llvm-svn: 72872
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
llvm-svn: 72707
failure during llvm-gcc bootstrap:
Assertion failed: (!Tmp2.getNode() && "Can't legalize BR_CC with legal condition!"), function ExpandNode, file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/CodeGen/SelectionDAG/LegalizeDAG.cpp, line 2923.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/gcc/libgcc2.c:1727: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
llvm-svn: 72530
This is basically the end of this series of patches for LegalizeDAG; the
remaining special cases can't be removed without more infrastructure
work. There's a FIXME for each relevant opcode near the beginning of
SelectionDAGLegalize::LegalizeOp.
llvm-svn: 72514
e.g.
orl $65536, 8(%rax)
=>
orb $1, 10(%rax)
Since narrowing is not always a win, e.g. i32 -> i16 is a loss on x86, dag combiner consults with the target before performing the optimization.
llvm-svn: 72507
doesn't split legal vector operands. This is necessary because the
type legalization (and therefore, vector splitting) code will be going
away soon.
llvm-svn: 72349
The DAGCombiner created a negative shiftamount, stored in an
unsigned variable. Later the optimizer eliminated the shift entirely as being
undefined.
Example: (srl (shl X, 56) 48). ShiftAmt is 4294967288.
Fix it by checking that the shiftamount is positive, and storing in a signed
variable.
llvm-svn: 72331
will allow simplifying LegalizeDAG to eliminate type legalization. (I
have a patch to do that, but it's not quite finished; I'll commit it
once it's finished and I've fixed any review comments for this patch.)
See the comment at the beginning of
lib/CodeGen/SelectionDAG/LegalizeVectorOps.cpp for more details on the
motivation for this patch.
llvm-svn: 72325
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
llvm-svn: 72276
build an integer and cast that to a float. This fixes a crash
caused by trying to split an f32 into two f16's.
This changes the behavior in test/CodeGen/XCore/fneg.ll because that
testcase now triggers a DAGCombine which converts the fneg into an integer
operation. If someone is interested, it's probably possible to tweak
the test to generate an actual fneg.
llvm-svn: 72162
of exception handling builtin sjlj targets in functions turns out not to
be necessary. Marking the intrinsic implementation in the .td file as
defining all registers is sufficient to get the context saved properly by
the containing function.
llvm-svn: 71743
a supporting preliminary patch for GCC-compatible SjLJ exception handling. Note that these intrinsics are not designed to be invoked directly by the user, but
rather used by the front-end as target hooks for exception handling.
llvm-svn: 71610
type, rather than assume that it does. If the operand is not vector, it
shouldn't be run through ScalarizeVectorOp. This fixes one of the
testcases in PR3886.
llvm-svn: 71453
None. However, we were always recording the region end. There's no longer a good
reason for this code to be separated out between the different opt levels, as it
was doing pretty much the same thing anyway.
llvm-svn: 71370
inlined function or the end of a function. Before, this was never executing the
"inlined" version of the Record method.
This will become important once the inlined Dwarf writer patch lands.
llvm-svn: 71268
checking for bcopy... no
checking for getc_unlocked... Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decUtility.c:360: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decUtility.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decNumber.c:5591: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decNumber.o] Error 1
make[3]: *** [all-stage2-libdecnumber] Error 2
make[3]: *** Waiting for unfinished jobs....
llvm-svn: 71165
shows up in -print-machineinstrs. This doesn't appear to affect anything, but it was
weird for some DBG_LABELs to have DebugLocs but not all of them.
llvm-svn: 70921
-Replace DebugLocTuple's Source ID with CompileUnit's GlobalVariable*
-Remove DwarfWriter::getOrCreateSourceID
-Make necessary changes for the above (fix callsites, etc.)
llvm-svn: 70520
memory operands otherwise the writebacks get lost when the inline asm
doesn't otherwise have side effects. This fixes rdar://6839427, though
clang really shouldn't generate these anymore.
llvm-svn: 70455
anything larger than 64-bits, avoiding a crash. This should
really be fixed to use APInts, though type legalization happens
to help us out and we get good code on the attached testcase at
least.
This fixes rdar://6836460
llvm-svn: 70360
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
llvm-svn: 70225
This particular one is undefined behavior (although this
isn't related to the crash), so it will no longer do it
at compile time, which seems better.
llvm-svn: 69990
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
llvm-svn: 69952
use ISD::EXTRACT_ELEMENT. SelectionDAG has a special fast-path for
the cast of an EXTRACT_ELEMENT with a BUILD_PAIR operand, for the
common case.
llvm-svn: 69948
type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
llvm-svn: 69467
add dependencies on nodes with exactly one successor which is a
COPY_TO_REGCLASS node. In the case that the copy is coalesced
away, the dependence should be on the user of the copy, rather
than the copy itself.
llvm-svn: 69309
Insetad of doing ...
if (inlined_subroutine && known_location)
DW_TAG_inline_subroutine
else
DW_TAG_subprogram
do
if (inlined_subroutine) {
if (known_location)
DW_TAG_inline_subroutine
} else {
DW_TAG_subprogram
}
llvm-svn: 69300
to support replacing a node with another that has a superset of
the result types. Use this instead of calling
ReplaceAllUsesOfValueWith for each value.
llvm-svn: 69209
operator is used by a CopyToReg to export the value to a different
block, don't reuse the CopyToReg's register for the subreg operation
result if the register isn't precisely the right class for the
subreg operation.
Also, rename the h-registers.ll test, now that there are more
than one.
llvm-svn: 69087
promoted to legal types without changing the type of the vector. This is
following a suggestion from Duncan
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2009-February/019923.html).
The transformation that used to be done during type legalization is now
postponed to DAG legalization. This allows the BUILD_VECTORs to be optimized
and potentially handled specially by target-specific code.
It turns out that this is also consistent with an optimization done by the
DAG combiner: a BUILD_VECTOR and INSERT_VECTOR_ELT may be combined by
replacing one of the BUILD_VECTOR operands with the newly inserted element;
but INSERT_VECTOR_ELT allows its scalar operand to be larger than the
element type, with any extra high bits being implicitly truncated. The
result is a BUILD_VECTOR where one of the operands has a type larger the
the vector element type.
Any code that operates on BUILD_VECTORs may now need to be aware of the
potential type discrepancy between the vector element type and the
BUILD_VECTOR operands. This patch updates all of the places that I could
find to handle that case.
llvm-svn: 68996
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
llvm-svn: 68961
Create debug_inlined dwarf section using these information. This info is used by gdb, at least on Darwin, to enable better experience debugging inlined functions. See DwarfWriter.cpp for more information on structure of debug_inlined section.
llvm-svn: 68847
in addition to ZERO_EXTEND and SIGN_EXTEND. Fix a bug in the
way it checked for live-out values, and simplify the way it
find users by using SDNode::use_iterator's (relatively) new
features. Also, make it slightly more permissive on targets
with free truncates.
In SelectionDAGBuild, avoid creating ANY_EXTEND nodes that are
larger than necessary. If the target's SwitchAmountTy has
enough bits, use it. This exposes the truncate to optimization
early, enabling more optimizations.
llvm-svn: 68670
eagerly. This helps avoid CopyToReg nodes in some cases where they
aren't needed, and also helps subsequent optimizer heuristics
in cases where the extra nodes would cause the node to appear
to have multiple results. This doesn't have a significant impact
currently; it'll help an upcoming change.
llvm-svn: 68667
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
llvm-svn: 68576
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
llvm-svn: 67917
stoppoint nodes around until Legalize; doing this
imposed an ordering on a sequence of loads that
came from different lines, interfering with scheduling.
llvm-svn: 67692
help out the register pressure reduction heuristics in the case of
nodes with multiple uses. Currently this uses very conservative
heuristics, so it doesn't have a broad impact, but in cases where it
does help it can make a big difference.
llvm-svn: 67586
a data dependency on the load node, so it really needs a
data-dependence edge to the load node, even if the load previously
existed.
And add a few comments.
llvm-svn: 67554
size by the array amount as an i32 value instead of promoting from
i32 to i64 then doing the multiply. Not doing this broke wrap-around
assumptions that the optimizers (validly) made. The ultimate real
fix for this is to introduce i64 version of alloca and remove mallocinst.
This fixes PR3829
llvm-svn: 67093
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
llvm-svn: 67076
if FPConstant is legal because if the FPConstant doesn't need to be stored
in a constant pool, the transformation is unlikely to be profitable.
llvm-svn: 66994
ptrtoint and inttoptr in X86FastISel. These casts aren't always
handled in the generic FastISel code because X86 sometimes needs
custom code to do truncation and zero-extension.
llvm-svn: 66988
by inserting explicit zero extensions where necessary. Included
is a testcase where SelectionDAG produces a virtual register
holding an i1 value which FastISel previously mistakenly assumed
to be zero-extended.
llvm-svn: 66941
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
llvm-svn: 66875
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
llvm-svn: 66779
alignment of the generated constant pool entry to the
desired alignment of a type. If we don't do this, we end up
trying to do movsd from 4-byte alignment memory. This fixes
450.soplex and 456.hmmer.
llvm-svn: 66641
and extern_weak_odr. These are the same as the non-odr versions,
except that they indicate that the global will only be overridden
by an *equivalent* global. In C, a function with weak linkage can
be overridden by a function which behaves completely differently.
This means that IP passes have to skip weak functions, since any
deductions made from the function definition might be wrong, since
the definition could be replaced by something completely different
at link time. This is not allowed in C++, thanks to the ODR
(One-Definition-Rule): if a function is replaced by another at
link-time, then the new function must be the same as the original
function. If a language knows that a function or other global can
only be overridden by an equivalent global, it can give it the
weak_odr linkage type, and the optimizers will understand that it
is alright to make deductions based on the function body. The
code generators on the other hand map weak and weak_odr linkage
to the same thing.
llvm-svn: 66339
with multiple chain operands. This can occur when the scheduler
has added chain operands to a node that already has a chain
operand, in order to handle physical register dependencies.
This fixes an llvm-gcc bootstrap failure on x86-64 introduced
in r66058.
llvm-svn: 66240
so it changed it into a 31 via the TLO.ShrinkDemandedConstant() call. Then it
would go through the DAG combiner again. This time it had a value of 31, which
was turned into a -1 by TLI.SimplifyDemandedBits(). This would ping pong
forever.
Teach the TLO.ShrinkDemandedConstant() call not to lower a value if the demanded
value is an XOR of all ones.
llvm-svn: 65985
arbitrary vector sizes. Add an optional MinSplatBits parameter to specify
a minimum for the splat element size. Update the PPC target to use the
revised interface.
llvm-svn: 65899
extracts + build_vector into a shuffle would fail, because the
type of the new build_vector would not be legal. Try harder to
create a legal build_vector type. Note: this will be totally
irrelevant once vector_shuffle no longer takes a build_vector for
shuffle mask.
New:
_foo:
xorps %xmm0, %xmm0
xorps %xmm1, %xmm1
subps %xmm1, %xmm1
mulps %xmm0, %xmm1
addps %xmm0, %xmm1
movaps %xmm1, 0
Old:
_foo:
xorps %xmm0, %xmm0
movss %xmm0, %xmm1
xorps %xmm2, %xmm2
unpcklps %xmm1, %xmm2
pshufd $80, %xmm1, %xmm1
unpcklps %xmm1, %xmm2
pslldq $16, %xmm2
pshufd $57, %xmm2, %xmm1
subps %xmm0, %xmm1
mulps %xmm0, %xmm1
addps %xmm0, %xmm1
movaps %xmm1, 0
llvm-svn: 65791
overly long ints, e.g. i96, into pieces at PHIs
and the nodes that feed into them; however big-endian
reverses the order of the pieces (for some reason), and
wasn't doing it the same way on both sides, so
the pieces didn't match and runtime failures ensued.
Fixes 188.ammp and sqlite3 on ppc32.
llvm-svn: 65481
them are generic changes.
- Use the "fast" flag that's already being passed into the asm printers instead
of shoving it into the DwarfWriter.
- Instead of calling "MI->getParent()->getParent()" for every MI, set the
machine function when calling "runOnMachineFunction" in the asm printers.
llvm-svn: 65379
a DBG_LABEL or not. We want to fall back to the original way of emitting debug
info when we're in -O0/-fast mode.
- Add plumbing in to pass the "Fast" flag to places that need it.
- XFAIL DebugInfo/deaddebuglabel.ll. This is finding 11 labels instead of 8. I
need to investigate still.
llvm-svn: 65367
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
llvm-svn: 65296
(Note: Eventually, commits like this will be handled via a pre-commit hook that
does this automagically, as well as expand tabs to spaces and look for 80-col
violations.)
llvm-svn: 64827
U include/llvm/CodeGen/DebugLoc.h
U lib/CodeGen/SelectionDAG/LegalizeDAG.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
Enable debug location generation at -Os. This goes with the reapplication of the
r63639 patch.
llvm-svn: 64715
one bit set, because the bit may be shifted off the end. Instead,
just check for a constant 1 being shifted. This is still sufficient
to handle all the cases in test/CodeGen/X86/bt.ll. This fixes PR3583.
llvm-svn: 64622
Cleanup some warning.
Remark: when struct/class are declared differently than they are defined, this make problem for VC++ since it seems to mangle class differently that struct. These error are very hard to understand and find. So please, try to keep your definition/declaration in sync.
Only tested with VS2008. hope it does not break anything. feel free to revert.
llvm-svn: 64554
in inline asm as signed (what gcc does). Add partial support
for x86-specific "e" and "Z" constraints, with appropriate
signedness for printing.
llvm-svn: 64400
is determined by whether the node has a Flag operand. However, if the
node does have a Flag operand, it will be glued to its register's
def, so the heuristic would end up spuriously applying to whatever
node is the def.
llvm-svn: 64319
It was transforming (x&y)==y to (x&y)!=0 in the case where
y is variable and known to have at most one bit set (e.g. z&1).
This is not correct; the expressions are not equivalent when y==0.
I believe this patch salvages what can be salvaged, including
all the cases in bt.ll. Dan, please review.
Fixes gcc.c-torture/execute/20040709-[12].c
llvm-svn: 64314
instruction index across each part. Instruction indices are used
to make live range queries, and live ranges can extend beyond
scheduling region boundaries.
Refactor the ScheduleDAGSDNodes class some more so that it
doesn't have to worry about this additional information.
llvm-svn: 64288
scheduling, and generalize is so that preserves state across
scheduling regions. This fixes incorrect live-range information around
terminators and labels, which are effective region boundaries.
In place of looking for terminators to anchor inter-block dependencies,
introduce special entry and exit scheduling units for this purpose.
llvm-svn: 64254
Adjust derived classes to pass UnknownLoc where
a DebugLoc does not make sense. Pick one of
DebugLoc and non-DebugLoc variants to survive
for all such classes.
llvm-svn: 64000
Many targets build placeholder nodes for special operands, e.g.
GlobalBaseReg on X86 and PPC for the PIC base. There's no
sensible way to associate debug info with these. I've left
them built with getNode calls with explicit DebugLoc::getUnknownLoc operands.
I'm not too happy about this but don't see a good improvement;
I considered adding a getPseudoOperand or something, but it
seems to me that'll just make it harder to read.
llvm-svn: 63992
SelectionDAGISel::CreateScheduler, and make it just create the
scheduler. Leave running the scheduler to the higher-level code.
This makes the higher-level code a little more explicit and
easier to follow, and will help enable some future refactoring.
llvm-svn: 63944
target directories themselves. This also means that VMCore no longer
needs to know about every target's list of intrinsics. Future work
will include converting the PowerPC target to this interface as an
example implementation.
llvm-svn: 63765
but when legalizing the operation, we split the vector type and generate a library
call whose type needs to be promoted. For example, X86 with SSE on but MMX off,
a divide v2i64 will be scalarized to 2 calls to a library using i64.
llvm-svn: 63760
support GraphViz, I've been using the foo->dump() facility. This
patch is a minor rewrite to the SelectionDAG dump() stuff to make it a
little more helpful. The existing foo->dump() functionality does not
change; this patch adds foo->dumpr(). All of this is only useful when
running LLVM under a debugger.
llvm-svn: 63736
in any old order. Since analyzing a node analyzes its
operands also, this can mean that when we pop a node
off the list of nodes to be analyzed, it may already
have been analyzed.
llvm-svn: 63632
information. This eliminates the need for the Flags field in MemSDNode,
so this makes LoadSDNode and StoreSDNode smaller. Also, it makes
FoldingSetNodeIDs for loads and stores two AddIntegers smaller.
llvm-svn: 63577
crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
llvm-svn: 63494
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
llvm-svn: 63482
- Modify TableGen to add the DebugLoc when calling getTargetNode.
(The light-weight wrappers are only temporary. The non-DebugLoc version will be
removed once the whole debug info stuff is finished with.)
llvm-svn: 63273
dagcombines that help it match in several more cases. Add
several more cases to test/CodeGen/X86/bt.ll. This doesn't
yet include matching for BT with an immediate operand, it
just covers more register+register cases.
llvm-svn: 63266
new isOperationLegalOrCustom, which does what isOperationLegal
previously did.
Update a bunch of callers to use isOperationLegalOrCustom
instead of isOperationLegal. In some case it wasn't obvious
which behavior is desired; when in doubt I changed then to
isOperationLegalOrCustom as that preserves their previous
behavior.
This is for the second half of PR3376.
llvm-svn: 63212
a uint64_t to verify that the value is in range for the given type,
to help catch accidental overflow. Fix a few places that relied on
getConstant implicitly truncating the value.
llvm-svn: 63128
checking logic. Rather than make the checking more
complicated, I've tweaked some logic to make things
conform to how the checking thought things ought to
be, since this results in a simpler "mental model".
llvm-svn: 63048
tidy up SDUse and related code.
- Replace the operator= member functions with a set method, like
LLVM Use has, and variants setInitial and setNode, which take
care up updating use lists, like LLVM Use's does. This simplifies
code that calls these functions.
- getSDValue() is renamed to get(), as in LLVM Use, though most
places can either use the implicit conversion to SDValue or the
convenience functions instead.
- Fix some more node vs. value terminology issues.
Also, eliminate the one remaining use of SDOperandPtr, and
SDOperandPtr itself.
llvm-svn: 62995
of each use in the SelectionDAG ReplaceAllUses* functions. Thanks
to Chris for spotting this opportunity.
Also, factor out code from all 5 of the ReplaceAllUses* functions
into AddNonLeafNodeToCSEMaps, which is now renamed
AddModifiedNodeToCSEMaps to more accurately reflect its purpose.
llvm-svn: 62964
testcase from PR3376, and in fact is sufficient to completely
avoid the problem in that testcase.
There's an underlying problem though; TLI.isOperationLegal
considers Custom to be Legal, which might be ok in some
cases, but that's what DAGCombiner is using in many places
to test if something is legal when LegalOperations is true.
When DAGCombiner is running after legalize, this isn't
sufficient. I'll address this in a separate commit.
llvm-svn: 62860
to "C ^ 1" is only valid when C is known to be either 0 or 1. Most of the
similar foldings in this function only handle "i1" types, but this one appears
intentionally written to handle larger integer types. If C has an integer
type larger than "i1", this needs to check if the high bits of a boolean
are known to be zero. I also changed the comment to describe this folding as
"C ^ 1" instead of "~C", since that is what the code does and since the latter
would only be valid for "i1" types. The good news is that most LLVM targets
use TargetLowering::ZeroOrOneBooleanContent so this change will not disable
the optimization; the bad news is that I've been unable to come up with a
testcase to demonstrate the problem.
I have also removed a "FIXME" comment for folding "select C, X, 0" to "C & X",
since the code looks correct to me. It could be made more aggressive by not
limiting the type to "i1", but that would then require checking for
TargetLowering::ZeroOrNegativeOneBooleanContent. Similar changes could be
done for the other SELECT foldings, but it was decided to be not worth the
trouble and complexity (see e.g., r44663).
llvm-svn: 62790
Simplify x+0 to x in unsafe-fp-math mode. This avoids a bunch of
redundant work in many cases, because in unsafe-fp-math mode,
ISD::FADD with a constant is considered free to negate, so the
DAGCombiner often negates x+0 to -0-x thinking it's free, when
in reality the end result is -x, which is more expensive than x.
Also, combine x*0 to 0.
This fixes PR3374.
llvm-svn: 62789
special cases after producing the new reduced-width load, because the
new load already has the needed adjustments built into it. This fixes
several bugs due to the special cases, including PR3317.
llvm-svn: 62692
- Ensure that (operation) legalization emits proper FDIV libcall when needed.
- Fix various bugs encountered during llvm-spu-gcc build, along with various
cleanups.
- Start supporting double precision comparisons for remaining libgcc2 build.
Discovered interesting DAGCombiner feature, which is currently solved via
custom lowering (64-bit constants are not legal on CellSPU, but DAGCombiner
insists on inserting one anyway.)
- Update README.
llvm-svn: 62664
SDNode subclasses to keep state that requires non-trivial
destructors, however it was already effectively impossible,
since the destructor isn't actually ever called. There currently
aren't any SDNode subclasses affected by this, and in general
it's desireable to keep SDNode objects light-weight.
This eliminates the last virtual member function in the SDNode
class, so it eliminates the need for a vtable pointer, making
SDNode smaller.
llvm-svn: 62539
uses are added to the From node while it is processing From's
use list, because of automatic local CSE. The fix is to avoid
visiting any new uses.
Fix a few places in the DAGCombiner that assumed that after
a RAUW call, the From node has no users and may be deleted.
This fixes PR3018.
llvm-svn: 62533
and every other instruction in their blocks to keep the terminator
instructions at the end, teach the post-RA scheduler how to operate
on ranges of instructions, and exclude terminators from the range
of instructions that get scheduled.
Also, exclude mid-block labels, such as EH_LABEL instructions, and
schedule code before them separately from code after them. This
fixes problems with the post-RA scheduler moving code past
EH_LABELs.
llvm-svn: 62366
a new toy hazard recognizier heuristic which attempts to direct the
scheduler to avoid clumping large groups of loads or stores too densely.
llvm-svn: 62291
and into the ScheduleDAGInstrs class, so that they don't get
destructed and re-constructed for each block. This fixes a
compile-time hot spot in the post-pass scheduler.
To help facilitate this, tidy and do some minor reorganization
in the scheduler constructor functions.
llvm-svn: 62275
scheduling dependencies. Add assertion checks to help catch
this.
It appears the Mips target defaults to list-td, and it has a
regression test that uses a physreg dependence. Such code was
liable to be miscompiled, and now evokes an assertion failure.
llvm-svn: 62177
aggregate types. Don't increment the current index after reaching
the end of a struct, as it will already be pointing at
one-past-the end. This fixes PR3288.
llvm-svn: 61828
AddPseudoTwoAddrDeps. This lets the scheduling infrastructure
avoid recalculating node heights. In very large testcases this
was a major bottleneck. Thanks to Roman Levenstein for finding
this!
As a side effect, fold-pcmpeqd-0.ll is now scheduled better
and it no longer requires spilling on x86-32.
llvm-svn: 61778
instructions to avoid copies, because TwoAddressInstructionPass
also does this optimization. The scheduler's version didn't
account for live-out values, which resulted in spurious commutes
and missed opportunities.
Now, TwoAddressInstructionPass handles all the opportunities,
instead of just those that the scheduler missed. The result is
usually the same, though there are occasional trivial differences
resulting from the avoidance of spurious commutes.
llvm-svn: 61611
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
llvm-svn: 61542
This removes all the _8, _16, _32, and _64 opcodes and replaces each
group with an unsuffixed opcode. The MemoryVT field of the AtomicSDNode
is now used to carry the size information. In tablegen, the size-specific
opcodes are replaced by size-independent opcodes that utilize the
ability to compose them with predicates.
This shrinks the per-opcode tables and makes the code that handles
atomics much more concise.
llvm-svn: 61389
temporary workaround for an obscure bug. When node cloning is
used, it is possible that more SUnits will be created, and
if the SUnits std::vector has to reallocate, it will
invalidate all the graph edges.
llvm-svn: 61122
computation code. Also, avoid adding output-depenency edges when both
defs are dead, which frequently happens with EFLAGS defs.
Compute Depth and Height lazily, and always in terms of edge latency
values. For the schedulers that don't care about latency, edge latencies
are set to 1.
Eliminate Cycle and CycleBound, and LatencyPriorityQueue's Latencies array.
These are all subsumed by the Depth and Height fields.
llvm-svn: 61073
width register load followed by a truncating
store for the copy, since the load will not place
the value in the lower bits. Probably partial
loads/stores can never happen here, but fix it
anyway.
llvm-svn: 60972
use of illegal integer types: instead, use a stack slot
and copying via integer registers. The existing code
is still used if the bitconvert is to a legal integer
type.
This fires on the PPC testcases 2007-09-08-unaligned.ll
and vec_misaligned.ll. It looks like equivalent code
is generated with these changes, just permuted, but
it's hard to tell.
With these changes, nothing in LegalizeDAG produces
illegal integer types anymore. This is a prerequisite
for removing the LegalizeDAG type legalization code.
While there I noticed that the existing code doesn't
handle trunc store of f64 to f32: it turns this into
an i64 store, which represents a 4 byte stack smash.
I added a FIXME about this. Hopefully someone more
motivated than I am will take care of it.
llvm-svn: 60964
ISD::ADD to emit an implicit EFLAGS. This was horribly broken. Instead, replace
the intrinsic with an ISD::SADDO node. Then custom lower that into an
X86ISD::ADD node with a associated SETCC that checks the correct condition code
(overflow or carry). Then that gets lowered into the correct X86::ADDOvf
instruction.
Similar for SUB and MUL instructions.
llvm-svn: 60915
for promoted integer types, eg: i16 on ppc-32, or
i24 on any platform. Complete support for arbitrary
precision integers would require handling expanded
integer types, eg: i128, but I couldn't be bothered.
llvm-svn: 60834
The Cost field is removed. It was only being used in a very limited way,
to indicate when the scheduler should attempt to protect a live register,
and it isn't really needed to do that. If we ever want the scheduler to
start inserting copies in non-prohibitive situations, we'll have to
rethink some things anyway.
A Latency field is added. Instead of giving each node a single
fixed latency, each edge can have its own latency. This will eventually
be used to model various micro-architecture properties more accurately.
The PointerIntPair class and an internal union are now used, which
reduce the overall size.
llvm-svn: 60806
essential problem was that the DAG can contain
random unused nodes which were never analyzed.
When remapping a value of a node being processed,
such a node may become used and need to be analyzed;
however due to operands being transformed during
analysis the node may morph into a different one.
Users of the morphing node need to be updated, and
this wasn't happening. While there I added a bunch
of documentation and sanity checks, so I (or some
other poor soul) won't have to scratch their head
over this stuff so long trying to remember how it
was all supposed to work next time some obscure
problem pops up! The extra sanity checking exposed
a few places where invariants weren't being preserved,
so those are fixed too. Since some of the sanity
checking is expensive, I added a flag to turn it
on. It is also turned on when building with
ENABLE_EXPENSIVE_CHECKS=1.
llvm-svn: 60797
Fix the shift amount when unrolling a vector shift into scalar shifts.
Fix problem in getShuffleScalarElt where it assumes that the input of
a bit convert must be a vector.
llvm-svn: 60740
and use it in x86 address mode folding. Also, make
getRegForValue return 0 for illegal types even if it has a
ValueMap for them, because Argument values are put in the
ValueMap. This fixes PR3181.
llvm-svn: 60696
1. ppcf128 select is expanded to f64 select's.
2. f64 select operand 0 is an i1 truncate, it's promoted to i32 zero_extend.
3. f64 select is updated. It's changed back to a "NewNode" and being re-analyzed.
4. f64 select operands are being processed. Operand 0 is a "NewNode". It's being expunged out of ReplacedValues map.
5. ExpungeNode tries to remap f64 select and notice it's a "NewNode" and assert.
Duncan, please take a look. Thanks.
llvm-svn: 60443
ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.
llvm-svn: 60348
multiplies.
Some more cleverness would be nice, though. It would be nice if we
could do this transformation on illegal types. Also, we would
prefer a narrower constant when possible so that we can use a narrower
multiply, which can be cheaper.
llvm-svn: 60283
introduce any new spilling; it just uses unused registers.
Refactor the SUnit topological sort code out of the RRList scheduler and
make use of it to help with the post-pass scheduler.
llvm-svn: 59999
(this doesn't happen that often, since most code
does not use illegal types) then follow it by a
DAG combiner run that is allowed to generate
illegal operations but not illegal types. I didn't
modify the target combiner code to distinguish like
this between illegal operations and illegal types,
so it will not produce illegal operations as well
as not producing illegal types.
llvm-svn: 59960
"It simplifies the type legalization part a bit, and produces better code by
teaching SelectionDAG about the extra bits in an i8 SADDO/UADDO node. In
essence, I spontaneously decided that on x86 this i8 boolean result would be
either 0 or 1, and on other platforms 0/1 or 0/-1, depending on whether the
platform likes it's boolean zero extended or sign extended."
llvm-svn: 59864
g++ -m32 -c -g -DIN_GCC -W -Wall -Wwrite-strings -Wmissing-format-attribute -fno-common -mdynamic-no-pic -DHAVE_CONFIG_H -Wno-unused -DTARGET_NAME=\"i386-apple-darwin9.5.0\" -I. -I. -I../../llvm-gcc.src/gcc -I../../llvm-gcc.src/gcc/. -I../../llvm-gcc.src/gcc/../include -I./../intl -I../../llvm-gcc.src/gcc/../libcpp/include -I../../llvm-gcc.src/gcc/../libdecnumber -I../libdecnumber -I/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.obj/include -I/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/include -DENABLE_LLVM -I/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.obj/../llvm.src/include -D_DEBUG -D_GNU_SOURCE -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -I. -I. -I../../llvm-gcc.src/gcc -I../../llvm-gcc.src/gcc/. -I../../llvm-gcc.src/gcc/../include -I./../intl -I../../llvm-gcc.src/gcc/../libcpp/include -I../../llvm-gcc.src/gcc/../libdecnumber -I../libdecnumber -I/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.obj/include -I/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/include ../../llvm-gcc.src/gcc/llvm-types.cpp -o llvm-types.o
../../llvm-gcc.src/gcc/llvm-convert.cpp: In member function 'void TreeToLLVM::EmitMemCpy(llvm::Value*, llvm::Value*, llvm::Value*, unsigned int)':
../../llvm-gcc.src/gcc/llvm-convert.cpp:1496: error: 'memcpy_i32' is not a member of 'llvm::Intrinsic'
../../llvm-gcc.src/gcc/llvm-convert.cpp:1496: error: 'memcpy_i64' is not a member of 'llvm::Intrinsic'
../../llvm-gcc.src/gcc/llvm-convert.cpp: In member function 'void TreeToLLVM::EmitMemMove(llvm::Value*, llvm::Value*, llvm::Value*, unsigned int)':
../../llvm-gcc.src/gcc/llvm-convert.cpp:1512: error: 'memmove_i32' is not a member of 'llvm::Intrinsic'
../../llvm-gcc.src/gcc/llvm-convert.cpp:1512: error: 'memmove_i64' is not a member of 'llvm::Intrinsic'
../../llvm-gcc.src/gcc/llvm-convert.cpp: In member function 'void TreeToLLVM::EmitMemSet(llvm::Value*, llvm::Value*, llvm::Value*, unsigned int)':
../../llvm-gcc.src/gcc/llvm-convert.cpp:1528: error: 'memset_i32' is not a member of 'llvm::Intrinsic'
../../llvm-gcc.src/gcc/llvm-convert.cpp:1528: error: 'memset_i64' is not a member of 'llvm::Intrinsic'
make[3]: *** [llvm-convert.o] Error 1
make[3]: *** Waiting for unfinished jobs....
rm fsf-funding.pod gcov.pod gfdl.pod cpp.pod gpl.pod gcc.pod
make[2]: *** [all-stage1-gcc] Error 2
make[1]: *** [stage1-bubble] Error 2
make: *** [all] Error 2
llvm-svn: 59809
"ISD::ADDO". ISD::ADDO is lowered into a target-independent form that does the
addition and then checks if the result is less than one of the operands. (If it
is, then there was an overflow.)
llvm-svn: 59779
schedulers. This doesn't have much immediate impact because
targets that use these schedulers by default don't yet provide
pipeline information.
This code also didn't have the benefit of register pressure
information. Also, removing it will avoid problems with list-burr
suddenly starting to do latency-oriented scheduling on x86 when we
start providing pipeline data, which would increase spilling.
llvm-svn: 59775
some of the latency computation logic out of the SDNode
ScheduleDAG code into a TargetInstrItineraries helper method
to help with this.
llvm-svn: 59761
the RR scheduler actually does look at latency values, but it
doesn't use a hazard recognizer so it has no way to know when
a no-op is needed, as opposed to just stalling and incrementing
the cycle count.
llvm-svn: 59759
dedicated "fast" scheduler in -fast mode instead, which is
faster. This speeds up llc -fast by a few percent on some
testcases -- the speedup only happens for code not handled by
fast-isel.
llvm-svn: 59700
is currently off by default, and can be enabled with
-disable-post-RA-scheduler=false.
This doesn't have a significant impact on most code yet because it doesn't
yet do anything to address anti-dependencies and it doesn't attempt to
disambiguate memory references. Also, several popular targets
don't have pipeline descriptions yet.
The majority of the changes here are splitting the SelectionDAG-specific
code out of ScheduleDAG, so that ScheduleDAG can be moved to
libLLVMCodeGen.a. The interface between ScheduleDAG-using code and
the rest of the scheduling code is somewhat rough and will evolve.
llvm-svn: 59676
Eli Friedman