virtual bool
ABI::StackUsesFrames () = 0;
Should return true if your ABI uses frames when doing stack backtraces. This
means a frame pointer is used that points to the previous stack frame in some
way or another.
virtual bool
ABI::CallFrameAddressIsValid (lldb::addr_t cfa) = 0;
Should take a look at a call frame address (CFA) which is just the stack
pointer value upon entry to a function. ABIs usually impose alignment
restrictions (4, 8 or 16 byte aligned), and zero is usually not allowed.
This function should return true if "cfa" is valid call frame address for
the ABI, and false otherwise. This is used by the generic stack frame unwinding
code to help determine when a stack ends.
virtual bool
ABI::CodeAddressIsValid (lldb::addr_t pc) = 0;
Validates a possible PC value and returns true if an opcode can be at "pc".
Some ABIs or architectures have fixed width instructions and must be aligned
to a 2 or 4 byte boundary. "pc" can be an opcode or a callable address which
means the load address might be decorated with extra bits (such as bit zero
to indicate a thumb function call for ARM targets), so take this into account
when returning true or false. The address should also be validated to ensure
it is a valid address for the address size of the inferior process. 32 bit
targets should make sure the address is less than UINT32_MAX.
Modified UnwindLLDB to use the new ABI functions to help it properly terminate
stacks.
Modified the mach-o function that extracts dependent files to not resolve the
path as the paths inside a binary might not match those on the current
host system.
llvm-svn: 132021
parse NOP instructions. I added the new table entries for the NOP for the
plain NOP, Yield, WFE, WFI, and SEV variants. Modified the opcode emulation
function EmulateInstructionARM::EmulateMOVRdSP(...) to notify us when it is
creating a frame. Also added an abtract way to detect the frame pointer
register for both the standard ARM ABI and for Darwin.
Fixed GDBRemoteRegisterContext::WriteAllRegisterValues(...) to correctly be
able to individually write register values back if case the 'G' packet is
not implemented or returns an error.
Modified the StopInfoMachException to "trace" stop reasons. On ARM we currently
use the BVR/BCR register pairs to say "stop when the PC is not equal to the
current PC value", and this results in a EXC_BREAKPOINT mach exception that
has 0x102 in the code.
Modified debugserver to create the short option string from long option
definitions to make sure it doesn't get out of date. The short option string
was missing many of the newer short option values due to a modification of
the long options defs, and not modifying the short option string.
llvm-svn: 131911
and set the address as an opcode address or as a callable address. This is
needed in various places in the thread plans to make sure that addresses that
might be found in symbols or runtime might already have extra bits set (ARM/Thumb).
The new functions are:
bool
Address::SetCallableLoadAddress (lldb::addr_t load_addr, Target *target);
bool
Address::SetOpcodeLoadAddress (lldb::addr_t load_addr, Target *target);
SetCallableLoadAddress will initialize a section offset address if it can,
and if so it might possibly set some bits in the address to make the address
callable (bit zero might get set for ARM for Thumb functions).
SetOpcodeLoadAddress will initialize a section offset address using the
specified target and it will strip any special address bits if needed
depending on the target.
Fixed the ABIMacOSX_arm::GetArgumentValues() function to require arguments
1-4 to be in the needed registers (previously this would incorrectly fallback
to the stack) and return false if unable to get the register values. The
function was also modified to first look for the generic argument registers
and then fall back to finding the registers by name.
Fixed the objective trampoline handler to use the new Address::SetOpcodeLoadAddress
function when needed to avoid address mismatches when trying to complete
steps into objective C methods. Make similar fixes inside the
AppleThreadPlanStepThroughObjCTrampoline::ShouldStop() function.
Modified ProcessGDBRemote::BuildDynamicRegisterInfo(...) to be able to deal with
the new generic argument registers.
Modified RNBRemote::HandlePacket_qRegisterInfo() to handle the new generic
argument registers on the debugserver side.
Modified DNBArchMachARM::NumSupportedHardwareBreakpoints() to be able to
detect how many hardware breakpoint registers there are using a darwin sysctl.
Did the same for hardware watchpoints in
DNBArchMachARM::NumSupportedHardwareWatchpoints().
llvm-svn: 131834
the "payload_length" argument for the "payload" packet data. This meant we
could end up sending random extra data with a packet depending on how the
packet was constructed.
Fixed GDBRemoteRegisterContext to properly save and restore all registers.
Previous fixes had been added to work around the "payload_length" issues fixed
above and aren't needed anymore.
Fix logging in GDBRemoteCommunication to make sure we log the correct packet
data being sent by using the packet length when dumping the packet contents.
Added register definitions for 'arm-lldb' in the "disasm-gdb-remote.pl" script
so if you have a register dump from the GDB remote that doesn't include the
qRegisterInfo packets, you can manually tell the script which registers are
which.
llvm-svn: 131715
Removed ifdeffed out functions and added the implementation of
WriteRegister for x86_64 architecture.
Signed-off-by: Johnny Chen <johnny.chen@apple.com>
llvm-svn: 131696
Fixed ThreadPlanCallFunction::ReportRegisterState(...) to only dump when
verbose logging is enabled and fixed the function to use the new
RegisterValue method of reading registers.
Fixed the GDB remote client to not send a continue packet after receiving
stdout or stderr from the inferior process.
llvm-svn: 131628
bool
Address::SetLoadAddress (lldb::addr_t load_addr, Target *target);
Added an == and != operator to RegisterValue.
Modified the ThreadPlanTracer to use RegisterValue objects to store the
register values when single stepping. Also modified the output to be a bit
less wide.
Fixed the ABIMacOSX_arm to not overwrite stuff on the stack. Also made the
trivial function call be able to set the ARM/Thumbness of the target
correctly, and also sets the return value ARM/Thumbness.
Fixed the encoding on the arm s0-s31 and d16 - d31 registers when the default
register set from a standard GDB server register sets.
llvm-svn: 131517
all register values. There is some junk that was appearing at the end
of the result the 'g' packet (read all register values). This function
was being called in:
bool
GDBRemoteRegisterContext::ReadAllRegisterValues (lldb::DataBufferSP &data_sp)
Then the packet data for the 'G' packet (write all registers) was being
placed into "data_sp" so the:
bool
GDBRemoteRegisterContext::WriteAllRegisterValues (const lldb::DataBufferSP &data_sp)
could restore it. In attempting to clean up the extra junk at the end of this
packet data, the packet was getting truncated.
llvm-svn: 131468
Modified ClangUserExpression and ClangUtilityFunction to display the actual
error (if one is available) that made the JIT fail instead of a canned
response.
Fixed the restoring of all register values when the 'G' packet doesn't work
to use the correct data.
llvm-svn: 131454
over when running JITed expressions. The allocated memory cache will cache
allocate memory a page at a time for each permission combination and divvy up
the memory and hand it out in 16 byte increments.
llvm-svn: 131453
Prior to this fix we would often call SendPacketAndWaitForResponse() which
returns the number of bytes in the response. The UNSUPPORTED response in the
GDB remote protocol is zero bytes and we were checking for it inside an if
statement:
if (SendPacketAndWaitForResponse(...))
{
if (response.IsUnsupportedResponse())
{
// UNSUPPORTED...
// This will never happen...
}
}
We now handle is properly as:
if (SendPacketAndWaitForResponse(...))
{
}
else
{
// UNSUPPORTED...
}
llvm-svn: 131393
thread plan. In order to get the return value, you can call:
void
ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);
This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.
Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.
Added the ability to call functions with 6 argument in the x86_64 ABI.
Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory
("_M") or deallocate ("_m") if we find they aren't supported.
Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...)
to be able to deal with the allocate and deallocate memory packets not being
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our
trivial function call support.
Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore
the qHostInfo triple information if any was specified in the target. Currently
if the target only specifies an architecture when creating the target:
(lldb) target create --arch i386 a.out
Then the vendor, os and environemnt will be adopted by the target.
If the target was created with any triple that specifies more than the arch:
(lldb) target create --arch i386-unknown-unknown a.out
Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.
Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue.
llvm-svn: 131370
solve the build break due to the lack of this method.
It also propose a solution to the API changes in RegisterContext.
I upgraded also the the python version in the makefile. My linux
installation has python2.7 and AFAIK also the latest ubuntu
has this version of python so maybe is worth upgrading.
Patch by Marco Minutoli <mminutoli@gmail.com>
[Note: I had to hand merge in the diffs since patch thinks it is a corrupt patch.]
llvm-svn: 131313
respective ABI plugins as they were plug-ins that supplied ABI specfic info.
Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.
Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.
llvm-svn: 131193
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:
virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);
virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);
There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue
The new register context calls that subclasses must implement are:
virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue ®_value) = 0;
virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue ®_value) = 0;
The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).
All RegiterContext and other sources have been switched over to using the new
regiter value class.
llvm-svn: 131096
a new "QLaunchArch:<arch-name>" where <arch-name> is the architecture name.
This allows us to remotely launch a debugserver and then set the architecture
for the binary we will launch.
llvm-svn: 131064
interface.
Added a quick way to set the platform though the SBDebugger interface. I will
actually an a SBPlatform support soon, but for now this will do.
ConnectionFileDescriptor can be passed a url formatted as: "fd://<fd>" where
<fd> is a file descriptor in the current process. This is handy if you have
services, deamons, or other tools that can spawn processes and give you a
file handle.
llvm-svn: 130565
Switch the EmulateInstruction to use the standard RegisterInfo structure
that is defined in the lldb private types intead of passing the reg kind and
reg num everywhere. EmulateInstruction subclasses also need to provide
RegisterInfo structs given a reg kind and reg num. This eliminates the need
for the GetRegisterName() virtual function and allows more complete information
to be passed around in the read/write register callbacks. Subclasses should
always provide RegiterInfo structs with the generic register info filled in as
well as at least one kind of register number in the RegisterInfo.kinds[] array.
llvm-svn: 130256
are defined as enumerations. Current bits include:
eEmulateInstructionOptionAutoAdvancePC
eEmulateInstructionOptionIgnoreConditions
Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:
virtual bool
SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;
Where instruction types are defined as:
//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------
typedef enum InstructionType
{
eInstructionTypeAny, // Support for any instructions at all (at least one)
eInstructionTypePrologueEpilogue, // All prologue and epilogue instructons that push and pop register values and modify sp/fp
eInstructionTypePCModifying, // Any instruction that modifies the program counter/instruction pointer
eInstructionTypeAll // All instructions of any kind
} InstructionType;
This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.
Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.
The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.
Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file:
source/Utility/ARM_DWARF_Registers.c
Took some of plug-ins out of the lldb_private namespace.
llvm-svn: 130189
inline contexts when the deepest most block is not inlined.
Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.
Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.
Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.
llvm-svn: 130044
the CommandInterpreter where it was always being used.
Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).
Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.
Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.
Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.
Make sure we don't add empty ModuleSP entries to a module list.
Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.
Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.
Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.
Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.
llvm-svn: 129351
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.
Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.
Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:
LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).
I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.
llvm-svn: 129112
NSEC_PER_SEC is not defined in sys/time.h on Linux. Replaced that macro with a
static constant inside TimeValue.
Patch by Marco Minutoli.
llvm-svn: 129071
GDBRemoteCommunicationServer classes. This involved adding a new packet
named "qSpeedTest" which can test the speed of a packet send/response pairs
using a wide variety of send/recv packet sizes.
Added a few new connection classes: one for shared memory, and one for using
mach messages (Apple only). The mach message stuff is experimental and not
working yet, but added so I don't lose the code. The shared memory stuff
uses pretty standard calls to setup shared memory.
llvm-svn: 128837
event.
Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters.
Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all
arguments, user and group info and more.
llvm-svn: 128694
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
llvm-svn: 128563
This patch upgrades the Linux process plugin to handle a larger range of signal
events. For example, we can detect when the inferior has "crashed" and why,
interrupt a running process, deliver an arbitrary signal, and so on.
llvm-svn: 128547
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
llvm-svn: 128239
On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
but this implements all the common functionality between
remote-macosx and remote-ios. It also allows for another
platform to be used (remote-gdb-server for now) when doing
remote connections. Keeping this pluggable will allow for
flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
cached SDK locations on the host.
A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote
protocol and uses the built in lldb_private::Host
static functions to implement many queries.
llvm-svn: 128193
platform connect <args>
platform disconnect
Each platform can decide the args they want to use for "platform connect". I
will need to add a function that gets the connect options for the current
platform as each one can have different options and argument counts.
Hooked up more functionality in the PlatformMacOSX and PlatformRemoteiOS.
Also started an platform agnostic PlatformRemoteGDBServer.cpp which can end
up being used by one or more actual platforms. It can also be specialized and
allow for platform specific commands.
llvm-svn: 128123
GDBRemoteCommunication - The base GDB remote communication class
GDBRemoteCommunicationClient - designed to be used for clients the connect to
a remote GDB server
GDBRemoteCommunicationServer - designed to be used on the server side of a
GDB server implementation.
llvm-svn: 128070
static archive that can be linked against. LLDB.framework/lldb.so
exports a very controlled API. Splitting the API into a static
library allows other tools (debugserver for now) to use the power
of the LLDB debugger core, yet not export it as its API is not
portable or maintainable. The Host layer and many of the other
internal only APIs can now be statically linked against.
Now LLDB.framework/lldb.so links against "liblldb-core.a" instead
of compiling the .o files only for the shared library. This fix
is only for compiling with Xcode as the Makefile based build already
does this.
The Xcode projecdt compiler has been changed to LLVM. Anyone using
Xcode 3 will need to manually change the compiler back to GCC 4.2,
or update to Xcode 4.
llvm-svn: 127963
platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)
When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can
do:
(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib
Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.
This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.
llvm-svn: 127934
member variable (m_packet_timeout which is a value in seconds). This value is
then used for all packets sent to/from the remote GDB server.
llvm-svn: 127392
an interface to a local or remote debugging platform. By default each host OS
that supports LLDB should be registering a "default" platform that will be
used unless a new platform is selected. Platforms are responsible for things
such as:
- getting process information by name or by processs ID
- finding platform files. This is useful for remote debugging where there is
an SDK with files that might already or need to be cached for debug access.
- getting a list of platform supported architectures in the exact order they
should be selected. This helps the native x86 platform on MacOSX select the
correct x86_64/i386 slice from universal binaries.
- Connect to remote platforms for remote debugging
- Resolving an executable including finding an executable inside platform
specific bundles (macosx uses .app bundles that contain files) and also
selecting the appropriate slice of universal files for a given platform.
So by default there is always a local platform, but remote platforms can be
connected to. I will soon be adding a new "platform" command that will support
the following commands:
(lldb) platform connect --name machine1 macosx connect://host:port
Connected to "machine1" platform.
(lldb) platform disconnect macosx
This allows LLDB to be well setup to do remote debugging and also once
connected process listing and finding for things like:
(lldb) process attach --name x<TAB>
The currently selected platform plug-in can now auto complete any available
processes that start with "x". The responsibilities for the platform plug-in
will soon grow and expand.
llvm-svn: 127286
anything in a SBSymbolContext filled in given an SBAddress:
SBSymbolContext
SBTarget::ResolveSymbolContextForAddress (const SBAddress& addr, uint32_t resolve_scope);
Also did a little cleanup on the ProcessGDBRemote stdio file handle
code.
llvm-svn: 126885
Modifed lldb_private::Process to be able to handle connecting to a remote
target that isn't running a process. This leaves lldb_private::Process in the
eStateConnected state from which we can then do an attach or launch.
Modified ProcessGDBRemote to be able to set stdin, stdout, stderr, working
dir, disable ASLR and a few other settings down by using new GDB remote
packets. This allows us to keep all of our current launch flags and settings
intact and still be able to communicate them over to the remote GDB server.
Previously these were being sent as arguments to the debugserver binary that
we were spawning. Also modified ProcessGDBRemote to handle losing connection
to the remote GDB server and always exit immediately. We do this by watching
the lldb_private::Communication event bit for the read thread exiting in the
ProcessGDBRemote async thread.
Added support for many of the new 'Q' packets for setting stdin, stdout,
stderr, working dir and disable ASLR to the GDBRemoteCommunication class for
easy accesss.
Modified debugserver for all of the new 'Q' packets and also made it so that
debugserver always exists if it loses connection with the remote debugger.
llvm-svn: 126444
of Stephen Wilson's idea (thanks for the input Stephen!). What I ended up
doing was:
- Got rid of ArchSpec::CPU (which was a generic CPU enumeration that mimics
the contents of llvm::Triple::ArchType). We now rely upon the llvm::Triple
to give us the machine type from llvm::Triple::ArchType.
- There is a new ArchSpec::Core definition which further qualifies the CPU
core we are dealing with into a single enumeration. If you need support for
a new Core and want to debug it in LLDB, it must be added to this list. In
the future we can allow for dynamic core registration, but for now it is
hard coded.
- The ArchSpec can now be initialized with a llvm::Triple or with a C string
that represents the triple (it can just be an arch still like "i386").
- The ArchSpec can still initialize itself with a architecture type -- mach-o
with cpu type and subtype, or ELF with e_machine + e_flags -- and this will
then get translated into the internal llvm::Triple::ArchSpec + ArchSpec::Core.
The mach-o cpu type and subtype can be accessed using the getter functions:
uint32_t
ArchSpec::GetMachOCPUType () const;
uint32_t
ArchSpec::GetMachOCPUSubType () const;
But these functions are just converting out internal llvm::Triple::ArchSpec
+ ArchSpec::Core back into mach-o. Same goes for ELF.
All code has been updated to deal with the changes.
This should abstract us until later when the llvm::TargetSpec stuff gets
finalized and we can then adopt it.
llvm-svn: 126278
Turns out that they can be funneled through the helper methods
EmulateShiftImm()/ EmulateShiftReg() as well.
Modify EmulateShiftImm() to handle SRType_ROR and SRType_RRX.
And fix a typo in the impl of utility Shift_C() in ARMUtils.h.
llvm-svn: 125689
it should live and the lldb_private::Process takes care of managing the
auto pointer to the dynamic loader instance.
Also, now that the ArchSpec contains the target triple, we are able to
correctly set the Target architecture in DidLaunch/DidAttach in the subclasses,
and then the lldb_private::Process will find the dynamic loader plug-in
by letting the dynamic loader plug-ins inspect the arch/triple in the target.
So now the ProcessGDBRemote plug-in is another step closer to be purely
process/platform agnostic.
I updated the ProcessMacOSX and the ProcessLinux plug-ins accordingly.
llvm-svn: 125650
Create two helper methods EmulateShiftImm() and EmulateShiftReg() and have ASR, LSL, and LSR
delegate to the helper methods which take an extra ARM_ShifterType parameter.
The opcodes tables have not been updated yet to reflect these new entries.
llvm-svn: 125633
now, in addition to cpu type/subtype and architecture flavor, contains:
- byte order (big endian, little endian)
- address size in bytes
- llvm::Triple for true target triple support and for more powerful plug-in
selection.
llvm-svn: 125602
ArchDefaultUnwindPlan plug-in interfaces are now cached per architecture
instead of being leaked for every frame.
Split the ArchDefaultUnwindPlan_x86 into ArchDefaultUnwindPlan_x86_64 and
ArchDefaultUnwindPlan_i386 interfaces.
There were sporadic crashes that were due to something leaking or being
destroyed when doing stack crawls. This patch should clear up these issues.
llvm-svn: 125541
an imm12 into imm32 for ARM or Thumb so that they now handle carry_in/carry_out.
Funnel ARMExpandImm()/ThumbExpandImm() to the enhanced ARMExpandImm_C()/ThumbExpandImm_C()
functions.
llvm-svn: 125508
are supported by the remote GDB target. We can also now deal with the lack of
vCont support and send packets that the remote GDB stub can use. We also error
out of the continue if LLDB tries to do something too complex when vCont isn't
supported.
llvm-svn: 125433
module's AST context. Prior to this fix, with gcc binaries, we end up with
a full class definition for any used classes in each compile unit due to the
one definition rule. This would result in us making N copies of class T, where
N is the number of compile units that use class T, in the module AST. When
an expression would then try and use any types that were duplicated, it would
quickly confuse clang and make expression evaluation fail due to all of the
duplicate types that got copied over. This is now fixed by making a map of
types in the DWARF that maps type names to a collection of types + declaration
(file + line number) + DIE. Then later when we find a type we look in this
module map and find any already cached types that we can just use.
8935777
llvm-svn: 125207
(lldb) process connect <remote-url>
Currently when you specify a file with the file command it helps us to find
a process plug-in that is suitable for debugging. If you specify a file you
can rely upon this to find the correct debugger plug-in:
% lldb a.out
Current executable set to 'a.out' (x86_64).
(lldb) process connect connect://localhost:2345
...
If you don't specify a file, you will need to specify the plug-in name that
you wish to use:
% lldb
(lldb) process connect --plugin process.gdb-remote connect://localhost:2345
Other connection URL examples:
(lldb) process connect connect://localhost:2345
(lldb) process connect tcp://127.0.0.1
(lldb) process connect file:///dev/ttyS1
We are currently treating the "connect://host:port" as a way to do raw socket
connections. If there is a URL for this already, please let me know and we
will adopt it.
So now you can connect to a remote debug server with the ProcessGDBRemote
plug-in. After connection, it will ask for the pid info using the "qC" packet
and if it responds with a valid process ID, it will be equivalent to attaching.
If it response with an error or invalid process ID, the LLDB process will be
in a new state: eStateConnected. This allows us to then download a program or
specify the program to run (using the 'A' packet), or specify a process to
attach to (using the "vAttach" packets), or query info about the processes
that might be available.
llvm-svn: 124846
sessions: When continue packet has been sent and an interrupt packet was
quickly sent, it would get read at the same time:
$c#00\x03
There was an error where the packet end index was always being computed
incorrectly by debugserver, but it wouldn't matter if there weren't extra
bytes on the end (the hex \x03 interrupt byte in this case). The first
'$' last 3 bytes of the data in the packet buffer were being trimmed
(trying to trim the '#' + checksum (#XX)) which made:
c#
And this would then be passed to the handle routine for the 'c' packet which
would see an extra character at the end and assume it was going to be in the
form c[addr] where "[addr]" was a hex address to resume at and this would
result in a malformed packet response. This is now fixed and everything works
great.
Another issue was issuing async packets correctly by doing correct handshakes
between the thread that wants to send the async packet, and the thread that
is tracking the current run.
Added a write lock to the communication class as well to make sure you never
get two threads trying to write data at the same time. This wasn't happening,
but it is a good idea to make sure it doesn't.
llvm-svn: 124369
takes separate file handles for stdin, stdout, and stder and also allows for
the working directory to be specified.
Added support to "process launch" to a new option: --working-dir=PATH. We
can now set the working directory. If this is not set, it defaults to that
of the process that has LLDB loaded. Added the working directory to the
host LaunchInNewTerminal function to allows the current working directory
to be set in processes that are spawned in their own terminal. Also hooked this
up to the lldb_private::Process and all mac plug-ins. The linux plug-in had its
API changed, but nothing is making use of it yet. Modfied "debugserver" and
"darwin-debug" to also handle the current working directory options and modified
the code in LLDB that spawns these tools to pass the info along.
Fixed ProcessGDBRemote to properly pass along all file handles for stdin, stdout
and stderr.
After clearing the default values for the stdin/out/err file handles for
process to be NULL, we had a crasher in UserSettingsController::UpdateStringVariable
which is now fixed. Also fixed the setting of boolean values to be able to
be set as "true", "yes", "on", "1" for true (case insensitive) and "false", "no",
"off", or "0" for false.
Fixed debugserver to properly handle files for STDIN, STDOUT and STDERR that are not
already opened. Previous to this fix debugserver would only correctly open and dupe
file handles for the slave side of a pseudo terminal. It now correctly handles
getting STDIN for the inferior from a file, and spitting STDOUT and STDERR out to
files. Also made sure the file handles were correctly opened with the NOCTTY flag
for terminals.
llvm-svn: 124060
checking the validity of the shared pointer prior to using it.
Fixed the GDB remote plug-in to once again watch for a reply from the "k"
packet, and fixed the logic to make sure the thread requesting the kill
and the async thread play nice (and very quickly) by synchronizing the
packet sending and reply. I also tweaked some of the shut down packet
("k" kill, "D" detach, and the halt packet) to make sure they do the right
thing.
Fixed "StateType Process::WaitForProcessStopPrivate (...)" to correctly pass
the timeout along to WaitForStateChangedEventsPrivate() and made the function
behave correctly with respect to timing out.
Added separate STDIN, STDOUT, and STDERR support to debugserver. Also added
the start of being able to set the working directory for the inferior process.
llvm-svn: 124049
threads that we spawn let us know when they are going away and that we
don't timeout waiting for a message from threads that have gone away.
We also now don't expect the "k" packet (kill) to send a response. This
greatly speeds up debugger shutdown performance. The test suite now runs
quite a bit faster.
Added a fix to the variable display code that fixes the display of
base classes. We were assuming the virtual or normal base class offsets
were being given in bit sizes, but they were being given as character
sizes, so we needed to multiply the offset by 8. This wasn't affecting
the expression parser, but it was affecting the correct display of C++
class base classes and all of their children.
llvm-svn: 124024
we are requesting a single thread to run. May seem like a silly thing to do, but the kernel
on MacOS X will inject new threads into a program willy-nilly, and I would like to keep them
from running if I can.
llvm-svn: 124018
to be fed 4 callbacks: read/write memory, and read/write registers. After this,
you can tell the object to read an instruction. This will cause the class to read
the PC, and read and instruction. Then you can emulate the instruction by calling
EvaluateInstruction. This will cause the class to figure out exactly what an opcode
does, and call the read/write mem/regs functions with actual values which allows one
to emulate an instruction without running a process, or it allows one to watch the
context information (the memory write is a pushing register 3 onto the stack at offset
12) so it can be used for generating call frame information. This way, in the future,
we will have one class that can be used to emulate instructions and generate our
unwind info from assembly.
llvm-svn: 123998
while the inferior is running) to be fast. The previous code would always
cause the sender to timeout, yet still return success due to the way we
were waiting for a value (incorrect value) to change. Now the ProcessGDBRemote
plug-in has a public and private "is running" predicate. This allows things
that need to send async packets to interrupt and wait for the private "is running"
state to be flipped to false, and then resume quickly with no timeout.
llvm-svn: 123903
This patch removes a potential race condition between a process monitor thread
and its parent waiting to interrogate the success/failure of the launch.
llvm-svn: 123803
The previous implementation of HardwareSingleStep wrongly resumed the thread and
single-stepped over the next instruction. Use the proper call to ProcessMonitor.
llvm-svn: 123800
Previous version simply resumed the associated thread to single step over a
single instruction which is not the intended semantics for this method. Set the
appropriate bit in the rflags register instead.
llvm-svn: 123799
I added support for asking if the GDB remote server supports thread suffixes
for packets that should be thread specific (register read/write packets) because
the way the GDB remote protocol does it right now is to have a notion of a
current thread for register and memory reads/writes (set via the "$Hg%x" packet)
and a current thread for running ("$Hc%x"). Now we ask the remote GDB server
if it supports adding the thread ID to the register packets and we enable
that feature in LLDB if supported. This stops us from having to send a bunch
of packets that update the current thread ID to some value which is prone to
error, or extra packets.
llvm-svn: 123762
bool RegisterContextLLDB::GetPC (addr_t& pc);
to:
bool RegisterContextLLDB::ReadPC (addr_t& pc);
To avoid confusion with the GetPC() function that is part of the
lldb_private::RegisterContext:
uint64_t RegisterContext::GetPC (uint64_t fail_value);
Bad things could happen if the two got intermixed and the wrong one got
called.
Fixed inifinite loop detection by watching for two frames where the
RegisterContextLLDB::CursorSP contains the same start_pc and cfa.
llvm-svn: 123673
the way LLDB lazily gets complete definitions for types within the debug info.
When we run across a class/struct/union definition in the DWARF, we will only
parse the full definition if we need to. This works fine for top level types
that are assigned directly to variables and arguments, but when we have a
variable with a class, lets say "A" for this example, that has a member:
"B *m_b". Initially we don't need to hunt down a definition for this class
unless we are ever asked to do something with it ("expr m_b->getDecl()" for
example). With my previous approach to lazy type completion, we would be able
to take a "A *a" and get a complete type for it, but we wouldn't be able to
then do an "a->m_b->getDecl()" unless we always expanded all types within a
class prior to handing out the type. Expanding everything is very costly and
it would be great if there were a better way.
A few months ago I worked with the llvm/clang folks to have the
ExternalASTSource class be able to complete classes if there weren't completed
yet:
class ExternalASTSource {
....
virtual void
CompleteType (clang::TagDecl *Tag);
virtual void
CompleteType (clang::ObjCInterfaceDecl *Class);
};
This was great, because we can now have the class that is producing the AST
(SymbolFileDWARF and SymbolFileDWARFDebugMap) sign up as external AST sources
and the object that creates the forward declaration types can now also
complete them anywhere within the clang type system.
This patch makes a few major changes:
- lldb_private::Module classes now own the AST context. Previously the TypeList
objects did.
- The DWARF parsers now sign up as an external AST sources so they can complete
types.
- All of the pure clang type system wrapper code we have in LLDB (ClangASTContext,
ClangASTType, and more) can now be iterating through children of any type,
and if a class/union/struct type (clang::RecordType or ObjC interface)
is found that is incomplete, we can ask the AST to get the definition.
- The SymbolFileDWARFDebugMap class now will create and use a single AST that
all child SymbolFileDWARF classes will share (much like what happens when
we have a complete linked DWARF for an executable).
We will need to modify some of the ClangUserExpression code to take more
advantage of this completion ability in the near future. Meanwhile we should
be better off now that we can be accessing any children of variables through
pointers and always be able to resolve the clang type if needed.
llvm-svn: 123613
This patch is enough to have shared objects recognized by LLDB. We can handle
position independent executables. We can handle dynamically loaded modules
brought in via dlopen.
The DYLDRendezvous class provides an interface to a structure present in the
address space of ELF-based processes. This structure provides the address of a
function which is called by the linker each time a shared object is loaded and
unloaded (thus a breakpoint at that address will let LLDB intercept such
events), a list of entries describing the currently loaded shared objects, plus
a few other things.
On Linux, processes are brought up with an auxiliary vector on the stack. One
element in this vector contains the (possibly dynamic) entry address of the
process. One does not need to walk the stack to find this information as it is
also available under /proc/<pid>/auxv. The new AuxVector class provides a
convenient read-only view of this auxiliary vector information. We use the
dynamic entry address and the address as specified in the object file to compute
the actual load address of the inferior image. This strategy works for both
normal executables and PIE's.
llvm-svn: 123592
by LLDB. Instead of being materialized into the input structure
passed to the expression, variables are left in place and pointers
to them are materialzied into the structure. Variables not resident
in memory (notably, registers) get temporary memory regions allocated
for them.
Persistent variables are the most complex part of this, because they
are made in various ways and there are different expectations about
their lifetime. Persistent variables now have flags indicating their
status and what the expectations for longevity are. They can be
marked as residing in target memory permanently -- this is the
default for result variables from expressions entered on the command
line and for explicitly declared persistent variables (but more on
that below). Other result variables have their memory freed.
Some major improvements resulting from this include being able to
properly take the address of variables, better and cleaner support
for functions that return references, and cleaner C++ support in
general. One problem that remains is the problem of explicitly
declared persistent variables; I have not yet implemented the code
that makes references to them into indirect references, so currently
materialization and dematerialization of these variables is broken.
llvm-svn: 123371
a method:
void RegisterContext::InvalidateIfNeeded (bool force);
Each time this function is called, when "force" is false, it will only call
the pure virtual "virtual void RegisterContext::InvalideAllRegisters()" if
the register context's stop ID doesn't match that of the process. When the
stop ID doesn't match, or "force" is true, the base class will clear its
cached registers and the RegisterContext will update its stop ID to match
that of the process. This helps make it easier to correctly flush the register
context (possibly from multiple locations depending on when and where new
registers are availabe) without inadvertently clearing the register cache
when it doesn't need to be.
Modified the ProcessGDBRemote plug-in to be much more efficient when it comes
to:
- caching the expedited registers in the stop reply packets (we were ignoring
these before and it was causing us to read at least three registers every
time we stopped that were already supplied in the stop reply packet).
- When a thread has no stop reason, don't keep asking for the thread stopped
info. Prior to this fix we would continually send a qThreadStopInfo packet
over and over when any thread stop info was requested. We now note the stop
ID that the stop info was requested for and avoid multiple requests.
Cleaned up some of the expression code to not look for ClangExpressionVariable
objects up by name since they are now shared pointers and we can just look for
the exact pointer match and avoid possible errors.
Fixed an bug in the ValueObject code that would cause children to not be
displayed.
llvm-svn: 123127
new "hexname" key for the "key:value;" duple that is part of the packet. This
allows for thread names to contain special characters such as $ # : ; + -
Debugserver now detects if the thread name contains special characters and
sends the chars in hex format if needed.
llvm-svn: 123053
frames, UnwindLLDB could create the incorrect RegisterContext for a given
stack frame because it was using the frame index (not the concrete frame
index). This was causing crashes when doing backtraces through the
SBFrame::GetFP() because a NULL register context was being returned for the
deepest stack frame.
llvm-svn: 123052
subclasses will automatically be able to take advantage of caching. The
cache line size is set to 512 by default.
This greatly speeds up stack backtraces on MacOSX when using the
ProcessGDBRemote process plug-in since only about 6300 packets per second
can be sent.
Initial speedups show:
Prior to caching: 10,000 stack frames took 5.2 seconds
After caching: 10,000 stack frames in 240 ms!
About a 20x speedup!
llvm-svn: 122996
cache even when a valid process exists. Previously, Target::ReadMemory would
read from the process if there was a valid one and then fallback to the
object file cache.
llvm-svn: 122989
an issue with the way the UnwindLLDB was handing out RegisterContexts: it
was making shared pointers to register contexts and then handing out just
the pointers (which would get put into shared pointers in the thread and
stack frame classes) and cause double free issues. MallocScribble helped to
find these issues after I did some other cleanup. To help avoid any
RegisterContext issue in the future, all code that deals with them now
returns shared pointers to the register contexts so we don't end up with
multiple deletions. Also now that the RegisterContext class doesn't require
a stack frame, we patched a memory leak where a StackFrame object was being
created and leaked.
Made the RegisterContext class not have a pointer to a StackFrame object as
one register context class can be used for N inlined stack frames so there is
not a 1 - 1 mapping. Updates the ExecutionContextScope part of the
RegisterContext class to never return a stack frame to indicate this when it
is asked to recreate the execution context. Now register contexts point to the
concrete frame using a concrete frame index. Concrete frames are all of the
frames that are actually formed on the stack of a thread. These concrete frames
can be turned into one or more user visible frames due to inlining. Each
inlined stack frame has the exact same register context (shared via shared
pointers) as any parent inlined stack frames all the way up to the concrete
frame itself.
So now the stack frames and the register contexts should behave much better.
llvm-svn: 122976
This code was a temporary workaround due to the lack of a dynamic loader plugin
for the Linux platform that has bit rotted over time. Instead of replacing this
hack with another a proper plugin will be developed instead.
llvm-svn: 122837
0 mid-stack, stop backtracing.
SectionLoadList.cpp (ResolveLoadAddress): Don't assert on an
out-of-range address, just return an invalid Address object.
The unwinder may be passing in invalid addresses on the final
stack frame and the assert is a problem.
llvm-svn: 122386
have children sections).
Modified SectionLoadList to do it's own multi-threaded protected on its map.
The ThreadSafeSTLMap class was difficult to deal with and wasn't providing
much utility, it was only getting in the way.
Make sure when the communication read thread is about to exit, it clears the
thread in the main class.
Fixed the ModuleList to correctly ignore architectures and UUIDs if they aren't
valid when searching for a matching module. If we specified a file with no arch,
and then modified the file and loaded it again, it would not match on subsequent
searches if the arch was invalid since it would compare an invalid architecture
to the one that was found or selected within the shared library or executable.
This was causing stale modules to stay around in the global module list when they
should have been removed.
Removed deprecated functions from the DynamicLoaderMacOSXDYLD class.
Modified "ProcessGDBRemote::IsAlive" to check if we are connected to a gdb
server and also make sure our process hasn't exited.
llvm-svn: 121236
do. Closing on EOF is an option that can be set on the
lldb_private::Communication or the lldb::SBCommunication objects after they
are created. Of course the EOF support isn't hooked up, so they don't do
anything at the moment, but they are left in so when the code is fixed, it
will be easy to get working again.
llvm-svn: 120885
inferior to be launched without setting up terminal stdin/stdout for it
(leaving the lldb command line accessible while the program is executing).
Also add a user settings variable, 'target.process.disable-stdio' to allow
the user to set this globally rather than having to use the command option
each time the process is launched.
llvm-svn: 120825
an error saying the resume timed out. Previously the thread that was trying
to resume the process would eventually call ProcessGDBRemote::DoResume() which
would broadcast an event over to the async GDB remote thread which would sent the
continue packet to the remote gdb server. Right after this was sent, it would
set a predicate boolean value (protected by a mutex and condition) and then the
thread that issued the ProcessGDBRemote::DoResume() would then wait for that
condition variable to be set. If the async gdb thread was too quick though, the
predicate boolean value could have been set to true and back to false by the
time the thread that issued the ProcessGDBRemote::DoResume() checks the boolean
value. So we can't use the predicate value as a handshake. I have changed the code
over to using a Event by having the GDB remote communication object post an
event:
GDBRemoteCommunication::eBroadcastBitRunPacketSent
This allows reliable handshaking between the two threads and avoids the erroneous
ProcessGDBRemote::DoResume() errors.
Added a host backtrace service to allow in process backtraces when trying to track
down tricky issues. I need to see if LLVM has any backtracing abilities abstracted
in it already, and if so, use that, but I needed something ASAP for the current issue
I was working on. The static function is:
void
Host::Backtrace (Stream &strm, uint32_t max_frames);
And it will backtrace at most "max_frames" frames for the current thread and can be
used with any of the Stream subclasses for logging.
llvm-svn: 120793
Add bool member to Communication class indicating whether the
Connection should be closed on receiving an EOF or not. Update the
Connection read to return an EOF status when appropriate. Modify the
Communication class to pass the EOF along or not, and to close the
Connection or not, as appropriate.
llvm-svn: 120723
RegisterContext* - normally this is retrieved from the ExecutionContext's
StackFrame but when we need to evaluate an expression while creating
the stack frame list this can be a little tricky.
Add DW_OP_deref_size, needed for the _sigtramp FDE expression.
Add support for processing DWARF expressions in RegisterContextLLDB.
Update callers to DWARFExpression::Evaluate.
llvm-svn: 119885
changing it to use it. There was an extra parameter added to the static
accessor global user settings controllers that wasn't needed. A bool was being
used as a parameter to the accessor just so it could be used to clean up
the global user settings controller which is now fixed by splitting up the
initialization into the "static void Class::Initialize()", access into the
"static UserSettingsControllerSP & Class::GetSettingsController()", and
cleanup into "static void Class::Terminate()".
Also added initialize and terminate calls to the logging code to avoid issues
when LLDB is shutting down. There were cases after the logging was switched
over to use shared pointers where we could crash if the global destructor
chain was being run and it causes the log to be destroyed and any any logging
occurred.
llvm-svn: 119757
to the DoHalt down in ProcessGDBRemote. I also moved the functionality that
was in ProcessGDBRemote::DoHalt up into Process::Halt so not every class has
to implement a tricky halt/resume on the internal state thread. The
functionality is the same as it was before with two changes:
- when we eat the event we now just reuse the event we consume when the private
state thread is paused and set the interrupted bool on the event if needed
- we also properly update the Process::m_public_state with the state of the
event we consume.
Prior to this, if you issued a "process halt" it would eat the event, not
update the process state, and then produce a new event with the interrupted
bit set and send it. Anyone listening to the event would get the stopped event
with a process that whose state was set to "running".
Fixed debugserver to not have to be spawned with the architecture of the
inferior process. This worked fine for launching processes, but when attaching
to processes by name or pid without a file in lldb, it would fail.
Now debugserver can support multiple architectures for a native debug session
on the current host. This currently means i386 and x86_64 are supported in
the same binary and a x86_64 debugserver can attach to a i386 executable.
This change involved a lot of changes to make sure we dynamically detect the
correct registers for the inferior process.
llvm-svn: 119680
with the Interrupted bit set. Process::HandlePrivateEvent ignores Interrupted events.
DoHalt is changed to ensure that the stop even is processed, and an event with
the Interrupted event is posted. Finally ClangFunction is rationalized to use this
facility so the that Halt is handled more deterministically.
llvm-svn: 119453
ReadThread stuff into the main Process class (out of the Process Plugins).
This has the (intended) side effect of disabling the command line tool
from reading input/commands while the process is running (the input is
directed to the running process rather than to the command interpreter).
llvm-svn: 119329
we're using the stack pointer to define the CFA again. Makes unwinds
while sitting at the 'ret' instruction work, assuming we have accurate
function address bounds.
llvm-svn: 119327
needs to use the current pc and current offset in two ways: To
determine which function we are currently executing, and the decide
how much of that function has executed so far. For the former use,
we need to back up the saved pc value by one byte if we're going to
use the correct function's unwind information -- we may be executing
a CALL instruction at the end of a function and the following instruction
belongs to a new function, or we may be looking at unwind information
which only covers the call instruction and not the subsequent instruction.
But when we're talking about deciding which row of an UnwindPlan to
execute, we want to use the actual byte offset in the function, not the
byte offset - 1.
Right now RegisterContextLLDB is tracking both the "real" offset and
an "offset minus one" and different parts of the class have to know
which one to use and they need to be updated/set in tandem. I want
to revisit this at some point.
The second change made in looking up eh_frame information; it was
formerly done by looking for the start address of the function we
are currently executing. But it is possible to have unwind information
for a function which only covers a small section of the function's
address range. In which case looking up by the start pc value may not
find the eh_frame FDE.
The hand-written _sigtramp() unwind info on Mac OS X, which covers
exactly one instruction in the middle of the function, happens to
trigger both of these issues.
I still need to get the UnwindPlan runner to handle arbitrary dwarf
expressions in the FDE but there's a good chance it will be easy to
reuse the DWARFExpression class to do this.
llvm-svn: 118882
I only did a tiny bit of testing; in the one case I tried changing the
contents of a radar in the middle of a stack and it was still current in
the live register context so it filtered down to frame 0 and was handed
over to the live register set RegisterContext. I need to test a case
where a register is saved on the stack in memory before I check this
one off.
llvm-svn: 118486
the frame count is requested or each frame is individually requested.
In practice this doesn't seem to help anything because we have
functions like StackFrameList::GetNumFrames() which is going to
request each frame anyway. And classes like ThreadPlanStepRange
and ThreadPlanStepOverRange get the stack depth in their ctor forcing
a full stack walk. But at least UnwindLLDB will delay doing a full
walk if it can.
llvm-svn: 118477
FuncUnwinders object if the eh_frame section was missing
from an objfile. Worked fine on x86_64 but on i386 where
eh_frame is unusual, that resulted in the arch default
UnwindPlan being used all the time instead of picking up
an assembly profile based unwindplan.
llvm-svn: 118467
a pseudo terminal even when the process being attached to.
Fixed a possible crasher in the in:
bool
ClangASTContext::IsAggregateType (clang_type_t clang_type);
It seems that if you pass in a record decl, enum decl, or objc class decl
and ask it if it is an aggregate type, clang will crash.
llvm-svn: 118404
don't crash if we disable logging when some code already has a copy of the
logger. Prior to this fix, logs were handed out as pointers and if they were
held onto while a log got disabled, then it could cause a crash. Now all logs
are handed out as shared pointers so this problem shouldn't happen anymore.
We are also using our new shared pointers that put the shared pointer count
and the object into the same allocation for a tad better performance.
llvm-svn: 118319
pseudoterminal to pass to the inferior for the inferior's I/O
(to allow direct writing, rather than passing all the I/O around
via packets).
llvm-svn: 118308
fixed them. Added DISALLOW_COPY_AND_ASSIGN to classes that should
not be bitwise copied. Added default initializers for member
variables that weren't being initialized in the ctor. Fixed a few
shadowed local variable mistakes.
llvm-svn: 118240
RegisterContextLLDB holds a reference to the SymbolContext
in the vector of Cursors that UnwindLLDB maintains. Switch
UnwindLLDB to hold a vector of shared pointers of Cursors
so this reference doesn't become invalid.
Correctly falling back from the "fast" UnwindPlan to the
"full" UnwindPlan when additional registers need to be
retrieved.
llvm-svn: 118218
than just the entire log channel.
Add checks, where appropriate, to make sure a log channel/category has
not been disabled before attempting to write to it.
llvm-svn: 117715
all of the calls inlined in the header file for better performance.
Fixed the summary for C string types (array of chars (with any combo if
modifiers), and pointers to chars) work in all cases.
Fixed an issue where a forward declaration to a clang type could cause itself
to resolve itself more than once if, during the resolving of the type itself
it caused something to try and resolve itself again. We now remove the clang
type from the forward declaration map in the DWARF parser when we start to
resolve it and avoid this additional call. This should stop any duplicate
members from appearing and throwing all the alignment of structs, unions and
classes.
llvm-svn: 117437
loaded/parsed. Should add timers to this eventually.
Delay getting a full UnwindPlan if it's possible to unwind with
just a fast UnwindPlan. This keeps us from reading the eh_frame
section unless we hit something built -fomit-frame pointer or we
hit a frame with no symbol (read: no start address) available.
It doesn't look like it is correctly falling back to using the
full UnwindPlan to provide additional registers that the fast
UnwindPlan doesn't supply; e.g. go to the middle of a stack and
ask for r12 and it will show you the value of r12 in frame 0.
That's a bug for tomorrow.
llvm-svn: 117361
gets to be a problem if you have a unbounded stack walk.
Fix the CFA sanity checks. Add one to the arch default UnwindPlan run which was giving
one extra stack frame on the main thread. Fix a couple of logging lines that had their
argument order incorrect.
llvm-svn: 117350
prologue profiling.
Change the log print statements to elide the thread number, make
some of them only print when IsLogVerbose().
Add a couple of sanity checks for impossible CFA values so backtraces
don't go too far off into the weeds.
llvm-svn: 117343
Not yet enabled as the default unwinder but there are no known
backtrace problems with the code at this point.
Added 'log enable lldb unwind' to help diagnose backtrace problems;
this output needs a little refining but it's a good first step.
eh_frame information is currently read unconditionally - the code
is structured to allow this to be delayed until it's actually needed.
There is a performance hit when you have to parse the eh_frame
information for any largeish executable/library so it's necessary
to avoid if possible.
It's confusing having both the UnwindPlan::RegisterLocation struct
and the RegisterConextLLDB::RegisterLocation struct, I need to rename
one of them.
The writing of registers isn't done in the RegisterConextLLDB subclass
yet; neither is the running of complex DWARF expressions from eh_frame
(e.g. used for _sigtramp on Mac OS X).
llvm-svn: 117256
So the issue here was that we have lldb_private::FileSpec that by default was
always resolving a path when using the:
FileSpec::FileSpec (const char *path);
and in the:
void FileSpec::SetFile(const char *pathname, bool resolve = true);
This isn't what we want in many many cases. One example is you have "/tmp" on
your file system which is really "/private/tmp". You compile code in that
directory and end up with debug info that mentions "/tmp/file.c". Then you
type:
(lldb) breakpoint set --file file.c --line 5
If your current working directory is "/tmp", then "file.c" would be turned
into "/private/tmp/file.c" which won't match anything in the debug info.
Also, it should have been just a FileSpec with no directory and a filename
of "file.c" which could (and should) potentially match any instances of "file.c"
in the debug info.
So I removed the constructor that just takes a path:
FileSpec::FileSpec (const char *path); // REMOVED
You must now use the other constructor that has a "bool resolve" parameter that you must always supply:
FileSpec::FileSpec (const char *path, bool resolve);
I also removed the default parameter to SetFile():
void FileSpec::SetFile(const char *pathname, bool resolve);
And fixed all of the code to use the right settings.
llvm-svn: 116944
but something is still killing our inferior.
Fixed an issue with darwin-debug where it wasn't passing all needed arguments
to the inferior.
Fixed a race condition with the attach to named process code.
llvm-svn: 116697
"vAttachName;<PROCNAME>" packet, and wait for a new process by name to launch
with the "vAttachWait;<PROCNAME>".
Fixed a few issues with attaching where if DoAttach() returned no error, yet
there was no valid process ID, we would deadlock waiting for an event that
would never happen.
Added a new "process launch" option "--tty" that will launch the process
in a new terminal if the Host layer supports the "Host::LaunchInNewTerminal(...)"
function. This currently works on MacOSX and will allow the debugging of
terminal applications that do complex operations with the terminal.
Cleaned up the output when the process resumes, stops and halts to be
consistent with the output format.
llvm-svn: 116693
static bool
Host::GetLLDBPath (lldb::PathType path_type, FileSpec &file_spec);
This will fill in "file_spec" with an appropriate path that is appropriate
for the current Host OS. MacOSX will return paths within the LLDB.framework,
and other unixes will return the paths they want. The current PathType
enums are:
typedef enum PathType
{
ePathTypeLLDBShlibDir, // The directory where the lldb.so (unix) or LLDB mach-o file in LLDB.framework (MacOSX) exists
ePathTypeSupportExecutableDir, // Find LLDB support executable directory (debugserver, etc)
ePathTypeHeaderDir, // Find LLDB header file directory
ePathTypePythonDir // Find Python modules (PYTHONPATH) directory
} PathType;
All places that were finding executables are and python paths are now updated
to use this Host call.
Added another new host call to launch the inferior in a terminal. This ability
will be very host specific and doesn't need to be supported on all systems.
MacOSX currently will create a new .command file and tell Terminal.app to open
the .command file. It also uses the new "darwin-debug" app which is a small
app that uses posix to exec (no fork) and stop at the entry point of the
program. The GDB remote plug-in is almost able launch a process and attach to
it, it currently will spawn the process, but it won't attach to it just yet.
This will let LLDB not have to share the terminal with another process and a
new terminal window will pop up when you launch. This won't get hooked up
until we work out all of the kinks. The new Host function is:
static lldb::pid_t
Host::LaunchInNewTerminal (
const char **argv, // argv[0] is executable
const char **envp,
const ArchSpec *arch_spec,
bool stop_at_entry,
bool disable_aslr);
Cleaned up FileSpec::GetPath to not use strncpy() as it was always zero
filling the entire path buffer.
Fixed an issue with the dynamic checker function where I missed a '$' prefix
that should have been added.
llvm-svn: 116690
Peter Collingbourne