Summary:
For instructions such as PSLLW/PSLLD/PSLLQ a variable shift amount may be passed in an XMM register.
The lower 64-bits of the register are evaluated to determine the shift amount.
This patch improves the construction of the vector containing the shift amount.
Reviewers: craig.topper, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28353
llvm-svn: 291120
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. Unfortunately, because of the way
that the ABI works, we need to generate code as if we supported interposition
whenever the linker might insert stubs for the purpose of supporting it.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 291003
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: aprantl, MatzeB, mkuper
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290955
Replacing the memory operand in the intrinsic versions of the comis/ucomis instrucions from f128mem to ssmem/sdmem accordingly.
Differential Revision: https://reviews.llvm.org/D28138
llvm-svn: 290948
In some cases its more efficient to combine TRUNC( BINOP( X, Y ) ) --> BINOP( TRUNC( X ), TRUNC( Y ) ) if the binop is legal for the truncated types.
This is true for vector integer multiplication (especially vXi64), as well as ADD/AND/XOR/OR in cases where we only need to truncate one of the inputs at runtime (e.g. a duplicated input or an one use constant we can fold).
Further work could be done here - scalar cases (especially i64) could often benefit (if we avoid partial registers etc.), other opcodes, and better analysis of when truncating the inputs reduces costs.
I have considered implementing this for all targets within the DAGCombiner but wasn't sure we could devise a suitable cost model system that would give us the range we need.
Differential Revision: https://reviews.llvm.org/D28219
llvm-svn: 290947
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
X86 target does not provide any target specific cost calculation for interleave patterns.It uses the common target-independent calculation, which gives very high numbers. As a result, the scalar version is chosen in many cases. The situation on AVX-512 is even worse, since we have 3-src shuffles that significantly reduce the cost.
In this patch I calculate the cost on AVX-512. It will allow to compare interleave pattern with gather/scatter and choose a better solution (PR31426).
* Shiffle-broadcast cost will be changed in Simon's upcoming patch.
Differential Revision: https://reviews.llvm.org/D28118
llvm-svn: 290810
This reverts commit r290694. It broke sanitizer tests on Win64. I'll
probably bring this back, but the jump tables will just live in .text
like they do for MSVC.
llvm-svn: 290714
Among other stuff, this allows to use predefined .option.machine_version_major
/minor/stepping symbols in the directive.
Relevant test expanded at once (also file renamed for clarity).
Differential Revision: https://reviews.llvm.org/D28140
llvm-svn: 290710
Summary:
We were already using 32-bit jump table entries, but this was a
consequence of the default PIC model on Win64, and not an intentional
design decision. This patch ensures that we always use 32-bit label
difference jump table entries on Win64 regardless of the PIC model. This
is a good idea because it saves executable size and object file size.
Moving the jump tables to .rdata cleans up the disassembled object code
and reduces the available ROP targets, but it requires adding one more
RIP-relative lea to the code. COFF doesn't have relocations to express
the difference between two arbitrary symbols, so we can't use the jump
table label in the label difference like we do elsewhere.
Fixes PR31488
Reviewers: majnemer, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28141
llvm-svn: 290694
There are cases of AVX-512 instructions that have two possible encodings. This is the case with instructions that use vector registers with low indexes of 0 - 15 and do not use the zmm registers or the mask k registers.
The EVEX encoding prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, using the VEX encoding for these instructions results in a code size reduction of ~2 bytes even though it is compiled with the AVX-512 features enabled.
Reviewers: Craig Topper, Zvi Rackoover, Elena Demikhovsky
Differential Revision: https://reviews.llvm.org/D27901
llvm-svn: 290663
The feature allows for conditional assembly, filling the entries
of .amd_kernel_code_t etc.
Symbols are defined with value 0 at the beginning of each kernel scope.
After each register usage, the respective symbol is set to:
value = max( value, ( register index + 1 ) )
Thus, at the end of scope the value represents a count of used registers.
Kernel scopes begin at .amdgpu_hsa_kernel directive, end at the
next .amdgpu_hsa_kernel (or EOF, whichever comes first). There is also
dummy scope that lies from the beginning of source file til the
first .amdgpu_hsa_kernel.
Test added.
Differential Revision: https://reviews.llvm.org/D27859
llvm-svn: 290608
The 128 and 256 bit masked intrinsics are currently unused by clang. The sse and avx2 unmasked intrinsics are used instead. The new 512-bit intrinsic will be used to do the same. Then all masked versions will removed and autoupgraded.
llvm-svn: 290573
According to the Cortex-A57 doc, FDIV/FSQRT instructions should use F0 unit
(W-unit in AArch64SchedA57.td, the same as cryptography instructions),
not F1 unit (X-unit in td, like ASIMD absolute diff accum SABA/UABA).
This patch changes FDIV/FSQRT scheduling declarations to use A57UnitW
instead of A57UnitX. Also, latencies for those instructions are
corrected.
Patch by Andrew Zhogin.
llvm-svn: 290426
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: mkuper, MatzeB, aprantl
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290423
The InstructionSelect pass will not look at target specific instructions
since they are already selected. As a result, the operands of target
specific instructions must be properly constrained, because it is not
going to fix them.
This fixes invalid register classes on call instruction.
llvm-svn: 290377
Canonicalize a select with a constant to the false side. This
enables more instruction shrinking opportunities since an
inline immediate can be used for the false side of v_cndmask_b32_e32.
This seems to usually be better but causes some code size regressions
in some tests.
llvm-svn: 290372
This is for splitMergedValStore in DAG Combine to share the target query interface
with similar logic in CodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D24707
llvm-svn: 290363
Follow up to D27209 fix, this patch now properly handles single transient
instruction in basic block.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D27856
llvm-svn: 290361
Summary: This is needed for later SDWA support in CodeGen.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27412
llvm-svn: 290338
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
llvm-svn: 290336
Replacing the memory operand in the ymm version of VPMADDWD from i128mem to i256mem.
Differential Revision: https://reviews.llvm.org/D28024
llvm-svn: 290333
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
I added API for creation a target specific memory node in DAG. Today, all memory nodes are common for all targets and their constructors are located in SelectionDAG.cpp.
There are some cases in X86 where we need to create a special node - truncation-with-saturation store, float-to-half-store.
In the current patch I added truncation-with-saturation nodes and I'm using them for intrinsics. In the future I plan to implement DAG lowering for truncation-with-saturation pattern.
Differential Revision: https://reviews.llvm.org/D27899
llvm-svn: 290250
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
When the instruction is processed the first time, it may be
deleted resulting in crashes. While the new test adds the same
user to the worklist twice, this particular case doesn't crash
but I'm not sure why.
llvm-svn: 290191
I haven't managed to get this to fail yet but its technically possible for the AND -> shuffle decomposition to result in illegal types.
llvm-svn: 290183
Summary:
Without a MachineMemOperand, the scheduler was assuming MIMG instructions
were ordered memory references, so no loads or stores could be reordered
across them.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27536
llvm-svn: 290179
Include of llvm/IR/Verifier.h was removed from HexagonCommonGEP.cpp in r289604
as unused. In fact it is required when expensive checks are enabled, because
it declared function `verifyFunction`, which is called in conditionally compiled
part of the file.
llvm-svn: 290170
Summary:
The expression for computing the return value of getMemOpBaseRegImmOfs has only
one possible value. The other value would result in a return earlier in the
function. This patch replaces the expression with its only possible value.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27437
llvm-svn: 290133
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
llvm-svn: 290106
Teach the instruction selector and legalizer that it's ok to have adds with 8 or
16-bit integers.
This is the second part of https://reviews.llvm.org/D27704
llvm-svn: 290105
Teach the instruction selector that it's ok to copy small values from physical
registers.
First part of https://reviews.llvm.org/D27704
llvm-svn: 290104
PWR9 processor model for instruction scheduling. A subsequent patch will migrate
PWR9 to Post RA MIScheduler.
https://reviews.llvm.org/D24525
llvm-svn: 290102
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
llvm-svn: 290098
Summary:
Added pair of directives .hsa_code_object_metadata/.end_hsa_code_object_metadata.
Between them user can put YAML string that would be directly put to the generated note. E.g.:
'''
.hsa_code_object_metadata
{
amd.MDVersion: [ 2, 0 ]
}
.end_hsa_code_object_metadata
'''
Based on D25046
Reviewers: vpykhtin, nhaustov, yaxunl, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, mgorny, tony-tye
Differential Revision: https://reviews.llvm.org/D27619
llvm-svn: 290097
Add support for selecting simple G_LOAD and G_FRAME_INDEX instructions (32-bit
scalars only). This will be useful for functions that need to pass arguments on
the stack.
First part of https://reviews.llvm.org/D27195.
llvm-svn: 290096
Not sure whether it causes and ASAN false positive or whether it
actually leads to incorrect code or whether it even exposes bad code.
Hans, I'll get you instructions to reproduce this.
llvm-svn: 290066
Commit on behalf of Gadi Haber
Removed EVEX_V512 prefix from scalar EVEX instructions since HW ignores L'L bits anyway (LIG). 4 instructions are modified.
The changed encodings are validated with XED.
Rviewers: delena, igorb
Differential revision: https://reviews.llvm.org/D27802
llvm-svn: 290065
These nodes are only emitted for lowering FABS/FNEG/FNABS/FCOPYSIGN. Ideally we just wouldn't create these nodes if SSE2 or higher is available, but it was simple to just convert them in DAG combine.
For SSE2, AVX, and AVX512 with DQI this is no functional change as the execution domain fixing pass ensures the right domain is selected regardless of the ISD opcode.
For AVX-512 without DQI we end up using integer instructions since the floating point versions aren't available. But we were already doing that for any logical operations in code that didn't come from FABS/FNEG/FNABS/FCOPYSIGN so this seems no worse. And we get the benefit of being able to fold broadcasts now.
llvm-svn: 290060
Re-apply r288561: Liveness tracking should be correct now after r290014.
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 290026
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
atomic_load_add returns the value before addition, but sets EFLAGS based on the
result of the addition. That means it's setting the flags based on effectively
subtracting C from the value at x, which is also what the outer cmp does.
This targets a pattern that occurs frequently with reference counting pointers:
void decrement(long volatile *ptr) {
if (_InterlockedDecrement(ptr) == 0)
release();
}
Clang would previously compile it (for 32-bit at -Os) as:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: 31 c9 xor %ecx,%ecx
6: 49 dec %ecx
7: f0 0f c1 08 lock xadd %ecx,(%eax)
b: 83 f9 01 cmp $0x1,%ecx
e: 0f 84 00 00 00 00 je 14 <?decrement@@YAXPCJ@Z+0x14>
14: c3 ret
and with this patch it becomes:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: f0 ff 08 lock decl (%eax)
7: 0f 84 00 00 00 00 je d <?decrement@@YAXPCJ@Z+0xd>
d: c3 ret
(Equivalent variants with _InterlockedExchangeAdd, std::atomic<>'s fetch_add
or pre-decrement operator generate the same code.)
Differential Revision: https://reviews.llvm.org/D27781
llvm-svn: 289955
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
This patch appears to result in trampolines in vtables being miscompiled
when they in turn tail call a method.
I've posted some preliminary details about the failure on the thread for
this commit and talked to Hal. He was comfortable going ahead and
reverting until we sort out what is wrong.
llvm-svn: 289928
Matt Arsenault