Replaces existing approach that could only search BUILD_VECTOR nodes.
Requires getTargetConstantBitsFromNode to discriminate cases with all/partial UNDEF bits in each element - this should also be useful when we get around to supporting getTargetShuffleMaskIndices with UNDEF elements.
llvm-svn: 295613
As discussed on D27692, this permits another domain to be used to combine a shuffle at high depths.
We currently set the required depth at 4 or more combined shuffles, this is probably too high for most targets but is a good starting point and already helps avoid a number of costly variable shuffles.
llvm-svn: 295608
Add the infrastructure to flag whether float and/or int domains are permitable.
A future patch will enable domain crossing based off shuffle depth and the value types of the source vectors.
llvm-svn: 295604
The instructions are marked commutable, but without special handling we don't get the immediate correct.
While here also remove the masked memory forms that aren't commutable.
llvm-svn: 295602
This requires some instructions to be renamed to move the Y earlier in the instruction name. The new names are more consistent with other instructions.
llvm-svn: 295579
It seems we were already upgrading 128-bit VPCMOV, but the intrinsic was still defined and being used in isel patterns. While I was here I also simplified the tablegen multiclasses.
llvm-svn: 295564
When promoting the Load of a Store-Load pair to a COPY all kill flags
between the store and the load need to be cleared.
rdar://30402435
Differential Revision: https://reviews.llvm.org/D30110
llvm-svn: 295512
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
This is resubmit of r292680, which was reverted by r293092. The internal application failures were actually caused by a source code bug.
llvm-svn: 295506
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
Removed the HasT2ExtractPack feature and replaced its references
with HasDSP. This then allows the Thumb2 extend instructions to be
selected for ARMv8M +dsp. These instruction descriptions have also
been refactored and more target tests have been added for their isel.
Differential Revision: https://reviews.llvm.org/D29623
llvm-svn: 295452
Add some asserts to make sure we're using the mappings that we think we're
using. This is to keep us from accidentally breaking functionality while moving
to TableGen'erated mappings.
llvm-svn: 295441
Start using the Subtarget to make decisions about what's legal. In particular,
we only mark floating point operations as legal if we have VFP2, which is
something we should've done from the very start.
llvm-svn: 295439
The original commit was reverted in r283329 due to a miscompile in
Chromium. That turned out to be the same issue as PR31257, which was
fixed in r295262.
llvm-svn: 295357
Defining nodes should not alias with one another, while clobbering
nodes can. When pushing defs on stacks, push clobbers first, link
non-clobbering defs, then push the defs.
The data flow in a statement is now: uses -> clobbers -> defs.
llvm-svn: 295356
The existing code always saves the xmm registers for 64-bit targets even if the
target doesn't support SSE (which is common for kernels). Thus, the compiler
inserts movaps instructions which lead to CPU exceptions when an interrupt
handler is invoked.
This commit fixes this bug by returning a register set without xmm registers
from getCalleeSavedRegs and getCallPreservedMask for such targets.
Patch by Philipp Oppermann.
Differential Revision: https://reviews.llvm.org/D29959
llvm-svn: 295347
Regression test neon-diagnostics.s needed changing because it now
produces a more specific diagnostic about the immediate ranges. One
change in the expected error message is not obvious, but there multiple
candidate and it happens to pick the immediate diagnostic.
Differential Revision: https://reviews.llvm.org/D29939
llvm-svn: 295331
Since they're only used for passing around double precision floating point
values into the general purpose registers, we'll lower them to VMOVDRR and
VMOVRRD.
llvm-svn: 295310
For now we just mark them as legal all the time and let the other passes bail
out if they can't handle it. In the future, we'll want to move more of the
brains into the legalizer.
llvm-svn: 295300
For the hard float calling convention, we just use the D registers.
For the soft-fp calling convention, we use the R registers and move values
to/from the D registers by means of G_SEQUENCE/G_EXTRACT. While doing so, we
make sure to honor the endianness of the target, since the CCAssignFn doesn't do
that for us.
For pure soft float targets, we still bail out because we don't support the
libcalls yet.
llvm-svn: 295295
The new 512-bit unmasked intrinsics will make it easy to handle these with the SSE/AVX intrinsics in InstCombine where we currently have a TODO.
llvm-svn: 295290
This reverts r294348, which removed support for conditional tail calls
due to the PR above. It fixes the PR by marking live registers as
implicitly used and defined by the now predicated tailcall. This is
similar to how IfConversion predicates instructions.
Differential Revision: https://reviews.llvm.org/D29856
llvm-svn: 295262
Uses a Custom implementation because the slot sizes being a multiple of the
pointer size isn't really universal, even for the architectures that do have a
simple "void *" va_list.
llvm-svn: 295255
Minor performance speedup - if any call to getShuffleScalarElt fails to get a result, don't both calling for the remaining elements as EltsFromConsecutiveLoads will fail anyhow.
llvm-svn: 295235
am_ldrlit diverged from am_brcond in r207105, but kept the OtherVT
operand type. It made sense for branch targets, as those are
represented as MVT::Other in SDAG. But loads operate on pointers.
This shouldn't have an observable effect on any in-tree code, but helps
make the patterns consistent for external users.
llvm-svn: 295229
This patch reverts region's scheduling to the original untouched state
in case if we have have decreased occupancy.
In addition it switches to use TargetRegisterInfo occupancy callback
for pressure limits instead of gradually increasing limits which were
just passed by. We are going to stay with the best schedule so we do
not need to tolerate worsened scheduling anymore.
Differential Revision: https://reviews.llvm.org/D29971
llvm-svn: 295206
Summary:
We don't seem to have great rules on what a valid VBROADCAST node looks like. And as a consequence we end up with a lot of patterns to try to catch everything. We have patterns with scalar inputs, 128-bit vector inputs, 256-bit vector inputs, and 512-bit vector inputs.
As you can see from the things improved here we are currently missing patterns for 128-bit loads being extended to 256-bit before the vbroadcast.
I'd like to propose that VBROADCAST should always take a 128-bit vector type as input. As a first step towards that this patch adds an EXTRACT_SUBVECTOR in front of VBROADCAST when the input is 256 or 512-bits. In the future I would like to add scalar_to_vector around all the scalar operations. And maybe we should consider adding a VBROADCAST+load node to avoid separating loads from the broadcasting operation when the load itself isn't foldable.
This requires an additional change in target shuffle combining to look for the extract subvector and look through it to find the original operand. I'm sure this change isn't perfect but was enough to fix a few test failures that were being caused.
Another interesting thing I noticed is that the changes in masked_gather_scatter.ll show cases were we don't remove a useless insert into element 1 before broadcasting element 0.
Reviewers: delena, RKSimon, zvi
Reviewed By: zvi
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D28747
llvm-svn: 295155
This patch corrects the maximum workgroups per CU if we have big
workgroups (more than 128). This calculation contributes to the
occupancy calculation in respect to LDS size.
Differential Revision: https://reviews.llvm.org/D29974
llvm-svn: 295134
This adds MXCSR to the set of recognized registers for X86 targets and updates the instructions that read or write it. I do not intend for all of the various floating point instructions that implicitly use the control bits or update the status bits of this register to ever have that usage modeled by default. However, when constrained floating point modes (such as strict FP exception status modeling or dynamic rounding modes) are enabled, implicit use/def information for MXCSR will be added to those instructions.
Until those additional updates are made this should cause (almost?) no functional changes. Theoretically, this will prevent instructions like LDMXCSR and STMXCSR from being moved past one another, but that should be prevented anyway and I haven't found a case where it is happening now.
Differential Revision: https://reviews.llvm.org/D29903
llvm-svn: 295004
Clean up the implementation of divide macro expansion by getting rid of a
FIXME regarding magic numbers and branch instructions. Match GAS' behaviour
for expansion of ddiv / div in the two and three operand cases. Add the two
operand alias for MIPSR6. Finally, optimize macro expansion cases where the
divisior is the $zero register.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29887
llvm-svn: 294960
Summary:
The attached test case fails with "fatal error: error in backend:
misaligned pc-relative fixup value" as the jump table is misaligned.
The EmitAlignment existed already for ARM and Thumb-1 code, but was
missing for Thumb-2.
The test checks that the fatal error disappears when generating an obj
file, as well as checking the align directive is there when producing an
asm file.
Reviewers: rengolin, grosbach, t.p.northover, jmolloy, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D29650
llvm-svn: 294950
We match a sequence of 3-4 instructions into a tTBB pseudo. One of our checks is that
a particular register in that sequence is killed (so it can be clobbered by the pseudo).
We weren't noticing if an errant MOV or other instruction had infiltrated the
sequence we were walking. If it had, and it defined the register we've already
identified as killed, it makes it live across the tBR_JT and thus unclobberable.
Notice this case and bail out.
llvm-svn: 294949
When generating a floating point comparison we currently unconditionally
generate VCMPE. This has the sideeffect of setting the cumulative Invalid
bit in FPSCR if any of the operands are QNaN.
It is expected that use of a relational predicate on a QNaN value should
raise Invalid. Quoting from the C standard:
The relational and equality operators support the usual mathematical
relationships between numeric values. For any ordered pair of numeric
values exactly one of relationships the less, greater, equal and is true.
Relational operators may raise the floating-point exception when argument
values are NaNs.
The standard doesn't explicitly state the expectation for equality operators,
but the implication and obvious expectation is that equality operators
should not raise Invalid on a QNaN input, as those predicates are wholly
defined on unordered inputs (to return not equal).
Therefore, add a new operand to ARMISD::FPCMP and FPCMPZ indicating if
QNaN should raise Invalid, and pipe that through to TableGen.
llvm-svn: 294945
We now detect that both the extract and insert indices are non-zero and convert to a shuffle. This will be lowered as a blend for 256-bit vectors or as a vshuf operations for 512-bit vectors.
llvm-svn: 294931
This results in the simplifications inside of getNode running while we're legalizing nodes popped off the worklist during the final DAG combine. This basically makes a DAG combine like operation occur during this legalize step, but we don't handle something quite the same way. I think we don't recursively added the removed nodes to the DAG combiner worklist.
llvm-svn: 294929
I can't prove that we can select this instruction or the AVX/SSE version, but I'm adding it for consistency for now so I can continue matching the load folding tables.
llvm-svn: 294907
The target shuffle match function arguments were using the term 'Ops' but the function names referred to them as 'Inputs' - use 'Inputs' consistently.
llvm-svn: 294900
Initial 256-bit vector support - 512-bit support requires extra checks for AVX512BW support (PMOVZXBW) that will be handled in a future patch.
llvm-svn: 294896
Removes duplicate constant extraction code in getTargetShuffleMaskIndices.
getTargetConstantBitsFromNode - adds support for VZEXT_MOVL(SCALAR_TO_VECTOR) and fail if the caller doesn't support undef bits.
llvm-svn: 294856
Seems the execution dependency pass likes to use FP instructions when most of the consuming code is integer if a vextractf128 instruction produced the register. Without AVX2 we don't have the corresponding integer instruction available.
This patch suppresses the domain on these instructions to GenericDomain if AVX2 is not supported so that they are ignored by domain fixing. If AVX2 is supported we'll report the correct domain and allow them to switch between integer and fp.
Overall I think this produces better results in the modified test cases.
llvm-svn: 294824
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Teach the cost model to consider f16 interleaved operations as
expensive. Otherwise, we are all but guaranteed to end up with
a large block of scalarized vector code.
llvm-svn: 294819
There are no vldN/vstN f16 variants, even with +fullfp16.
We could use the i16 variants, but, in practice, even with +fullfp16,
the f16 sequence leading to the i16 shuffle usually gets scalarized.
We'd need to improve our support for f16 codegen before getting there.
Reject f16 interleaved accesses. If we try to emit the f16 intrinsics,
we'll just end up with a selection failure.
llvm-svn: 294818
Summary:
powerpc64 big-endian is not supported, but I believe that most logic can
be shared, except for xray_powerpc64.cc.
Also add a function InvalidateInstructionCache to xray_util.h, which is
copied from llvm/Support/Memory.cpp. I'm not sure if I need to add a unittest,
and I don't know how.
Reviewers: dberris, echristo, iteratee, kbarton, hfinkel
Subscribers: mehdi_amini, nemanjai, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29742
llvm-svn: 294781
Since r274013, we've been looking through bitcasts on broadcast inputs.
In the scalar-folding case (from a load, build_vector, or sc2vec),
the input type didn't matter, as we'd simply bitcast the resulting
scalar back.
However, when broadcasting a 128-bit-lane-aligned element, we create an
EXTRACT_SUBVECTOR. Use proper types, by creating an extract_subvector
of the original input type.
llvm-svn: 294774
In the encoding of system registers in the M-class MSR instruction the mask bits
should be 2 for registers that don't take a _<bits> qualifier (the instruction
is unpredictable otherwise), and should also be 2 if the register takes a
_<bits> qualifier but it's not present as no _<bits> is an alias for _nzcvq.
Differential Revision: https://reviews.llvm.org/D29828
llvm-svn: 294762
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
In some cases we call getTargetConstantBitsFromNode for nodes that haven't been lowered from BUILD_VECTOR yet
Note: We're getting very close to being able to move most of the constant extraction code from getTargetShuffleMaskIndices into getTargetConstantBitsFromNode
llvm-svn: 294746
until we can get better TargetMachine::isCompatibleDataLayout to compare - otherwise
we can't code generate existing bitcode without a string equality data layout.
This reverts commit r294702.
llvm-svn: 294709
For other platforms we should find out what they need and likely
make the same change, however, a smaller additional change is easier
for platforms we know have it specified in the ABI. As part of this
rewrite some of the handling in the backends for data layout and update
a bunch of testcases.
Based on a patch by Simonas Kazlauskas!
llvm-svn: 294702
This change returns empty PSet list for M0 register. Otherwise its
PSet as defined by tablegen is SReg_32. This results in incorrect
register pressure calculation every time an instruction uses M0.
Such uses count as SReg_32 PSet and inadequately increase pressure
on SGPRs.
Differential Revision: https://reviews.llvm.org/D29798
llvm-svn: 294691
Gcc supports target armv7ve which is armv7-a with virtualization
extensions. This change adds support for this in llvm for gcc
compatibility.
Also remove redundant FeatureHWDiv, FeatureHWDivARM for a few models as
this is specified automatically by FeatureVirtualization.
Patch by Manoj Gupta.
Differential Revision: https://reviews.llvm.org/D29472
llvm-svn: 294661
This requires that we communicate to X86InstrInfo::optimizeCompareInstr
that the second operand is neither a register nor an immediate. The way we
do that is by setting CmpMask to zero.
Note that there were already instructions where the second operand was not a
register nor an immediate, namely X86::SUB*rm, so also set CmpMask to zero
for those instructions. This seems like a latent bug, but I was unable to
trigger it.
Differential Revision: https://reviews.llvm.org/D28621
llvm-svn: 294634
Summary:
Convert all obvious node_begin/node_end and child_begin/child_end
pairs to range based for.
Sending for review in case someone has a good idea how to make
graph_children able to be inferred. It looks like it would require
changing GraphTraits to be two argument or something. I presume
inference does not happen because it would have to check every
GraphTraits in the world to see if the noderef types matched.
Note: This change was 3-staged with clang as well, which uses
Dominators/etc from LLVM.
Reviewers: chandlerc, tstellarAMD, dblaikie, rsmith
Subscribers: arsenm, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D29767
llvm-svn: 294620
In combineOrCmpEqZeroToCtlzSrl, replace "getConstantOperand == 0" by "isNullConstant" to account for floating point constants.
Differential Revision: https://reviews.llvm.org/D29756
llvm-svn: 294588
LowerBuildVectorv16i8/LowerBuildVectorv8i16 insert values into a UNDEF vector if the build vector doesn't contain any zero elements, resulting in register dependencies with a previous use of the register.
This patch attempts to break the register dependency by either always zeroing the vector before hand or (if we're inserting to the 0'th element) by using VZEXT_MOVL(SCALAR_TO_VECTOR(i32 AEXT(Elt))) which lowers to (V)MOVD and performs a similar function. Additionally (V)MOVD is a shorter instruction than PINSRB/PINSRW. We already do something similar for SSE41 PINSRD.
On pre-SSE41 LowerBuildVectorv16i8 we go a little further and use VZEXT_MOVL(SCALAR_TO_VECTOR(i32 ZEXT(Elt))) if the build vector contains zeros to avoid the vector zeroing at the cost of a scalar zero extension, which can probably be brought over to the other cases in a future patch in some cases (load folding etc.)
Differential Revision: https://reviews.llvm.org/D29720
llvm-svn: 294581
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Functions that have a dynamic alloca require a base register which is defined to
be X19 on AArch64 and r6 on ARM. We have defined the swifterror register to be
the same register. Use a different callee save register for swifterror instead:
X21 on AArch64
R8 on ARM
rdar://30433803
llvm-svn: 294551
We mark X0 as preserved by a call that passes the returned parameter.
x0 = ...
fun(x0) // no implicit def of x0
This no longer is valid if we pass the parameter in a different register then
the returned value as is the case with a swiftself parameter (passed in x20).
x20 = ...
fun(x20) // there should be an implict def of x8
rdar://30425845
llvm-svn: 294527
AArch64 has specific instructions to multiply two numbers at double the width
and produce the high part of the result. These can be used to implement LLVM's
mul.with.overflow instructions fairly simply. Helps with C++ operator new[].
llvm-svn: 294519
Implement getRegPressureLimit and getRegPressureSetLimit callbacks in
SIRegisterInfo.
This makes standard converge scheduler to behave almost the same as
GCNScheduler, sometime slightly better sometimes a bit worse.
In gerenal that is also possible to switch GCNScheduler to use these
callbacks instead of getMaxWaves(), which also makes GCNScheduler
slightly better on some tests and slightly worse on another. A big
win is behavior with converge scheduler.
Note, these are used not only by scheduling, but in places like
MachineLICM.
Differential Revision: https://reviews.llvm.org/D29700
llvm-svn: 294518
Summary: This patch is required by D28855, and enables us to rely on CMake's ability to handle out of order target dependencies.
Reviewers: mgorny, chapuni, bryant
Subscribers: llvm-commits, jgosnell
Differential Revision: https://reviews.llvm.org/D28869
llvm-svn: 294514
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
llvm-svn: 294493
Add a register bank for floating point values and select simple instructions
using them (add, copies from GPR).
This assumes that the hardware can cope with a single precision add (VADDS)
instruction, so the legalizer will treat G_FADD as legal and the instruction
selector will refuse to select if the hardware doesn't support it. In the future
we'll want to be more careful about this, and legalize to libcalls if we have to
use soft float.
llvm-svn: 294442
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
They are currently modelled incorrectly (as calls, which clobber
registers, confusing e.g. Machine Copy Propagation).
Reverting until we figure out the proper solution.
llvm-svn: 294348
Summary:
This change allows usage of store instruction for implicit null check.
Memory Aliasing Analisys is not used and change conservatively supposes
that any store and load may access the same memory. As a result
re-ordering of store-store, store-load and load-store is prohibited.
Patch by Serguei Katkov!
Reviewers: reames, sanjoy
Reviewed By: sanjoy
Subscribers: atrick, llvm-commits
Differential Revision: https://reviews.llvm.org/D29400
llvm-svn: 294338
Adds the vnot extended mnemonic for the vnor instruction.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29225
llvm-svn: 294330
vXi8/vXi64 vector shifts are often shifted as vYi16/vYi32 types but we weren't always remembering to bitcast the input.
Tested with a new assert as we don't currently manipulate these shifts enough for test cases to catch them.
llvm-svn: 294308
When constructing global address literals while targeting the RWPI
relocation model. LLVM currently only uses literal pools. If MOVW/MOVT
instructions are available we can use these instead. Beside being more
efficient it allows -arm-execute-only to work with
-relocation-model=RWPI as well.
When we generate MOVW/MOVT for global addresses when targeting the RWPI
relocation model, we need to use base relative relocations. This patch
does the needed plumbing in MC to generate these for MOVW/MOVT.
Differential Revision: https://reviews.llvm.org/D29487
Change-Id: I446786e43a6f5aa9b6a5bb2cd216d60d41c7755d
llvm-svn: 294298
This includes unmasked forms of variable shift and shifting by the lower element of a register.
Still need to do shift by immediate which was not foldable prior to avx512 and all the masked forms.
llvm-svn: 294285
For amdgcn target Clang generates addrspacecast to represent null pointers in private and local address spaces.
In LLVM codegen, the static variable initializer is lowered by virtual function AsmPrinter::lowerConstant which is target generic. Since addrspacecast is target specific, AsmPrinter::lowerConst
This patch overrides AsmPrinter::lowerConstant with AMDGPUAsmPrinter::lowerConstant, which is able to lower the target-specific addrspacecast in the null pointer representation so that -1 is co
Differential Revision: https://reviews.llvm.org/D29284
llvm-svn: 294265
AArch64 was asserting when it was asked to provide a register-bank of a size it
couldn't deal with (in this case an s128 IMPLICIT_DEF). But we want a robust
fallback path so this isn't allowed.
llvm-svn: 294248
We don't handle all cases yet (see arm64-fallback.ll for an example), but this
is enough to cover most common C++ code so it's a good place to start.
llvm-svn: 294247
Changes include:
- Updates to the instruction descriptor flags.
- Improvements to the packet shuffler and checker.
- Updates to the handling of certain relocations.
- Better handling of duplex instructions.
llvm-svn: 294226
When splitting up one store into several in splitStoreSplat we have to
make sure we get the MachinePointerInfo right, otherwise alias
analysis thinks they all store to the same location. This can then
cause invalid scheduling later on.
Differential Revision: https://reviews.llvm.org/D29446
llvm-svn: 294203
Currently we only combine shuffle nodes if they have a single user to prevent us from causing code bloat by splitting the shuffles into several different combines.
We don't take into account that in some cases we will already have combined all the users during recursively calling up the shuffle tree.
This patch keeps a list of all the shuffle nodes that have been combined so far and permits combining of further shuffle nodes if all its users are in that list.
Differential Revision: https://reviews.llvm.org/D29399
llvm-svn: 294183
Previously only the superscalar scheduled expansion of the dla macro for
MIPS64 was implemented. If assembler temporary register is not available
and the optional source register is not the destination register, synthesize
the address using the naive solution of adds and shifts.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29328
llvm-svn: 294182
Similar to what we already do for zero elt insertion, we can quickly rematerialize 'allbits' vectors so to avoid a unnecessary gpr value and insertion into a vector
llvm-svn: 294162
Summary:
Make this interface reusable similarly to std::call_once and std::once_flag interface.
This makes porting LLDB to NetBSD easier as there was in the original approach a portable way to specify a non-static once_flag. With this change translating std::once_flag to llvm::once_flag is mechanical.
Sponsored by <The NetBSD Foundation>
Reviewers: mehdi_amini, labath, joerg
Reviewed By: mehdi_amini
Subscribers: emaste, clayborg
Differential Revision: https://reviews.llvm.org/D29566
llvm-svn: 294143
Similar was already done for several other shuffles in this function.
The test changes are because the old code used explicity zeroing for elements that could have been undef.
While I was here I also changed other shuffle vectors in the same function to use the same input twice instead of creating UNDEF nodes. getVectorShuffle can create the UNDEF for us.
llvm-svn: 294130
Summary:
This patch tablegen-erates the ARM register bank information so that the
static tables added in D27807 no longer need to be maintained.
Depends on D27338
Reviewers: t.p.northover, rovka, ab, qcolombet, aditya_nandakumar
Reviewed By: rovka
Subscribers: aemerson, rengolin, mgorny, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D28567
llvm-svn: 294124
It is sufficient to skip emission of these arguments as we have nothing
to actually pass through the function call.
The AVR-GCC reference has nothing to say about zero-sized arguments,
presumably because C/C++ doesn't support them. This means we don't have
to worry about ABI differences.
llvm-svn: 294119
This has quite positive performance impact according to measurements.
Before previous fixes to limit the optimization that was too high
and blowed compile time and scratch usage, but now this is gone and
we can bump the threshold.
Differential Revision: https://reviews.llvm.org/D29505
llvm-svn: 294032
The .end <symbol> directive for MIPS marks the end of a symbol and sets the
symbol's size. Previously, the corresponding emitDirective handler asserted
that a function's size could be evaluated to an absolute value at that point
in time.
This cannot be done with when directives like .align have been encountered,
instead set the function's size to the corresponding symbolic expression and
let ELFObjectWriter resolve the expression to an absolute value. This avoids
a redundant call to evaluateAsAbsolute.
llvm-svn: 294012
Summary:
The tail call optimisation is performed before register allocation, so
at that point we don't know if LR is being spilt or not. If LR was spilt
to the stack, then we cannot do a tail call optimisation. That would
involve popping back into LR which is not possible in Thumb1 code.
Reviewers: rengolin, jmolloy, rovka, olista01
Reviewed By: olista01
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D29020
llvm-svn: 294000
Exit loop analysis early if suitable private access found.
Do not account for GEPs which are invariant to loop induction variable.
Do not account for Allocas which are too big to fit into register file anyway.
Add option for tuning: -amdgpu-unroll-threshold-private.
Differential Revision: https://reviews.llvm.org/D29473
llvm-svn: 293991
On one test this seems to have given more chance for DAG combine to do other INSERT_SUBVECTOR/EXTRACT_SUBVECTOR combines before the BLENDI was created. Looks like we can still improve more by teaching DAG combine to optimize INSERT_SUBVECTOR/EXTRACT_SUBVECTOR with BLENDI.
llvm-svn: 293944
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
This is the second in the series of patches to enable adding
of machine sched-models for ARM processors easier and compact.
This patch focuses on integer instructions and adds missing
sched definitions.
Reviewers: rovka, rengolin
Differential Revision: https://reviews.llvm.org/D29127
llvm-svn: 293935
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
Merging Load-add-store pattern into a increment op previously dropped
the load's chain from the instructions dependence if the store is
chained to a TokenFactor.
llvm-svn: 293892
It is important to change the ArgInfo's type from pointer to integer, otherwise
the CC assign function won't know what to do. Instead of hacking it up, we use
ComputeValueVTs and introduce some of the helpers that we will need later on for
lowering more complex types.
llvm-svn: 293889
Allow unknown types in TLI.getValueType, otherwise we get asserts for certain
types that we do not support yet (instead of returning that we don't support
them and falling through the normal error path).
llvm-svn: 293888
This is a first attempt at using the MOVMSK instructions to replace all_of/any_of reduction patterns (i.e. an and/or + shuffle chain).
So far this only matches patterns where we are reducing an all/none bits source vector (i.e. a comparison result) but we should be able to expand on this in conjunction with improvements to 'bool vector' handling both in the x86 backend as well as the vectorizers etc.
Differential Revision: https://reviews.llvm.org/D28810
llvm-svn: 293880
This moves creation of SUBV_BROADCAST and merging of adjacent loads that are being inserted together.
This is a step towards removing legalizing of INSERT_SUBVECTOR except for vXi1 cases.
llvm-svn: 293872
The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
Functions matching LDS use to occupancy return results for a workgroup
of 64 workitems. The numbers has to be adjusted for bigger workgroups.
For example a workgroup of size 256 already occupies 4 waves just by
itself. Given that all numbers of LDS use in the compiler are per
workgroup, occupancy shall be multiplied by 4 in this case. Each 64
workitems still limited by the same number, but 4 subrgoups 64 workitems
each can afford 4 times more LDS to get the same occupancy.
In addition change initializes LDS size in the subtarget to a real value
for SI+ targets. This is required since LDS size is a variable in these
calculations.
Differential Revision: https://reviews.llvm.org/D29423
llvm-svn: 293837
The GAS assembler supports the ".set bopt" directive but according
to the sources it doesn't do anything. It's supposed to optimize
branches by filling the delay slot of a branch with it's target.
This patch teaches the MIPS asm parser to accept both and warn in
the case of 'bopt' that the bopt directive is unsupported.
This resolves PR/31841.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 293798
This patch moves some helper functions related to interleaved access
vectorization out of LoopVectorize.cpp and into VectorUtils.cpp. We would like
to use these functions in a follow-on patch that improves interleaved load and
store lowering in (ARM/AArch64)ISelLowering.cpp. One of the functions was
already duplicated there and has been removed.
Differential Revision: https://reviews.llvm.org/D29398
llvm-svn: 293788
These were simply preserving the flags of the original operation,
which was too conservative in most cases and incorrect for mul.
nsw/nuw may be needed for some combines to cleanup messes when
intermediate sext_inregs are introduced later.
Tested valid combinations with alive.
llvm-svn: 293776
DebugInfoDWARFTests is the only user so far which initializes the
MCObjectStreamer without initializing the ASMParser. The MIPS backend
relies on the ASMParser to initialize the MipsABIInfo object and to
update the target streamer with it. This should turn the mips buildbots
green.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D28025
llvm-svn: 293772
The the following instructions:
- LD/LWZ (expanded from sjLj pseudo-instructions)
- LXVL/LXVLL vector loads
- STXVL/STXVLL vector stores
all require G8RC_NO0X class registers for RA.
Differential Revision: https://reviews.llvm.org/D29289
Committed for Lei Huang
llvm-svn: 293769
Add both cores to the target parser and TableGen. Test that eabi
attributes are set correctly for both cores. Additionally, test the
absence and presence of MOVT in Cortex-M23 and Cortex-M33, respectively.
Committed on behalf of Sanne Wouda.
Reviewers : rengolin, olista01.
Differential Revision: https://reviews.llvm.org/D29073
llvm-svn: 293761
For SSE we use fp because of the smaller encoding, but that doesn't apply to AVX. So just do the natural thing so we don't have to explain why we aren't. We can't do this for 256-bit loads/stores since integer loads and stores aren't available in AVX1 so we need fallback patterns since the integer types are legal.
This doesn't affect any tests because execution domain fixing freely converts the instructions anyway. Honestly, we could probably rely on it for the SSE size optimization too.
llvm-svn: 293743
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, sections 4.14 and 4.15.
Differential revision: https://reviews.llvm.org/D28698
llvm-svn: 293739
This feature enables the fusion of such operations on Cortex A57, as
recommended in its Software Optimisation Guide, section 4.13, and on Exynos
M1.
Differential revision: https://reviews.llvm.org/D28491
llvm-svn: 293738
This patch moves the class for scheduling adjacent instructions,
MacroFusion, to the target.
In AArch64, it also expands the fusion to all instructions pairs in a
scheduling block, beyond just among the predecessors of the branch at the
end.
Differential revision: https://reviews.llvm.org/D28489
llvm-svn: 293737
x*rsqrt(x) returns NaN for x == 0, whereas 1/rsqrt(x) returns 0, as
desired.
Verified that the particular nvptx approximate instructions here do in
fact return 0 for x = 0.
llvm-svn: 293713
Technically, this is actually changes the expression and the original
assert was "wrong", but since the conjunction is with true, it doesn't
matter in this case.
llvm-svn: 293709
@ABS8 can be applied to symbols which appear as immediate operands to
instructions that have a 8-bit immediate form for that operand. It causes
the assembler to use the 8-bit form and an 8-bit relocation (e.g. R_386_8
or R_X86_64_8) for the symbol.
Differential Revision: https://reviews.llvm.org/D28688
llvm-svn: 293667
Summary:
For some reason instructions are being inserted in the wrong order with some
builds. I'm not sure why this is happening.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D29325
llvm-svn: 293639
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
llvm-svn: 293634
Also add the ability to recognise PINSR(Vex, 0, Idx).
Targets shuffle combines won't replace multiple insertions with a bit mask until a depth of 3 or more, so we avoid codesize bloat.
The unnecessary vpblendw in clearupper8xi16a will be fixed in an upcoming patch.
llvm-svn: 293627
Just adds the vmr (Vector Move Register) mnemonic for the VOR instruction in
the PPC back end.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29133
llvm-svn: 293626
Summary:
This lets us lower to sqrt.approx and rsqrt.approx under more
circumstances.
* Now we emit sqrt.approx and rsqrt.approx for calls to @llvm.sqrt.f32,
when fast-math is enabled. Previously, we only would emit it for
calls to @llvm.nvvm.sqrt.f. (With this patch we no longer emit
sqrt.approx for calls to @llvm.nvvm.sqrt.f; we rely on intcombine to
simplify llvm.nvvm.sqrt.f into llvm.sqrt.f32.)
* Now we emit the ftz version of rsqrt.approx when ftz is enabled.
Previously, we only emitted rsqrt.approx when ftz was disabled.
Reviewers: hfinkel
Subscribers: llvm-commits, tra, jholewinski
Differential Revision: https://reviews.llvm.org/D28508
llvm-svn: 293605
I think this is safe as long as no inputs are known to ever
be nans.
Also add an intrinsic for fmed3 to be able to handle all safe
math cases.
llvm-svn: 293598
For now just port some of the existing NVPTX tests
and from an old HSAIL optimization pass which
approximately did the same thing.
Don't enable the pass yet until more testing is done.
llvm-svn: 293580
- Move DEBUG_TYPE below includes
- Change unknown address space constant to be consistent with other
passes
- Grammar fixes in debug output
llvm-svn: 293567
combineX86ShufflesRecursively can still only handle a maximum of 2 shuffle inputs but everything before it now supports any number of shuffle inputs.
This will be necessary for combining OR(SHUFFLE, SHUFFLE) patterns.
llvm-svn: 293560
Since we have no call support and late linking we can produce code
only for used symbols. This saves compilation time, size of the final
executable, and size of any intermediate dumps.
Run Internalize pass early in the opt pipeline followed by global
DCE pass. To enable it RT can pass -amdgpu-internalize-symbols option.
Differential Revision: https://reviews.llvm.org/D29214
llvm-svn: 293549
This is worse if the original constant is an inline immediate.
This should also be done for 64-bit adds, but requires fixing
operand folding bugs first.
llvm-svn: 293540
Different architectures can have different meaning for flags in the
SHF_MASKPROC mask, so we should always check what the architecture use
before checking the flag.
NFC for now, but will allow fixing the value of an xmos flag.
llvm-svn: 293484
Previously this test case fired an assertion in getNode because we tried to create an insert_subvector with both input types the same size and the index pointing to half the vector width.
llvm-svn: 293446
Replaces an xor+movd/movq with an xorps which will be shorter in codesize, avoid an int-fpu transfer, allow modern cores to fast path the result during decode and helps other combines recognise an all-zero vector.
The only reason I can think of that we'd want to keep scalar_to_vector in this case is to help recognise the upper elts are undef but this doesn't seem to be a problem.
Differential Revision: https://reviews.llvm.org/D29097
llvm-svn: 293438
Support lowering AEABI TLS access (__aeabi_read_tp) with long calls.
This requires adjusting the call sequence to use an indirect call to get
full addressability.
Resolves PR31769!
llvm-svn: 293433
PACKUSWB converts Signed word to Unsigned byte, (the same about DW) and it can't be used for umin+truncate pattern.
AVX-512 VPMOVUS* instructions fit the pattern since they convert Unsigned to Unsigned.
See https://llvm.org/bugs/show_bug.cgi?id=31773
Differential Revision: https://reviews.llvm.org/D29196
llvm-svn: 293431
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
llvm-svn: 293417
Support for barrier synchronization between a subset of threads
in a CTA through one of sixteen explicitly specified barriers.
These intrinsics are not directly exposed in CUDA but are
critical for forthcoming support of OpenMP on NVPTX GPUs.
The intrinsics allow the synchronization of an arbitrary
(multiple of 32) number of threads in a CTA at one of 16
distinct barriers. The two intrinsics added are as follows:
call void @llvm.nvvm.barrier.n(i32 10)
waits for all threads in a CTA to arrive at named barrier #10.
call void @llvm.nvvm.barrier(i32 15, i32 992)
waits for 992 threads in a CTA to arrive at barrier #15.
Detailed description of these intrinsics are available in the PTX manual.
http://docs.nvidia.com/cuda/parallel-thread-execution/#parallel-synchronization-and-communication-instructions
Reviewers: hfinkel, jlebar
Differential Revision: https://reviews.llvm.org/D17657
llvm-svn: 293384
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Coverage/smoke Gfx7/8 tests were committed r292922 but then reverted
by r292974 due to AddressSanitizer failure, which is fixed by this patch.
Tests to be re-committed soon.
llvm-svn: 293338
Summary: Small change to get the FREEP instruction to decode properly.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29193
llvm-svn: 293314
Accomplishes what r292982 was supposed to, which ended up
only really making the necessary test changes.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 293310
With the adjustPassManager interface that is now possible to use
custom early module passes.
Differential Revision: https://reviews.llvm.org/D29189
llvm-svn: 293300
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
The Windows on ARM target uses custom division for normal division as
the backend needs to insert division-by-zero checks. However, it is
designed to only handle non-vectorized division. ARM has custom
lowering for vectorized division as that can avoid loading registers
with the values and invoke a division routine for each one, preferring
to lower using NEON instructions. Fall back to the custom lowering for
the NEON instructions if we encounter a vectorized division.
Resolves PR31778!
llvm-svn: 293259
This is an attempt to fix the win7 bot that does not seem to be very
good at infering the type when it gets used in an initiliazer list.
llvm-svn: 293246
Summary: Refine floating point SQRT and DIV with accurate latency information.
Reviewers: mcrosier
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D29191
llvm-svn: 293204
1) Explicitly sets mayLoad/mayStore property in the tablegen files on load/store
instructions.
2) Updated the flags on a number of intrinsics indicating that they write
memory.
3) Added SDNPMemOperand flags for some target dependent SDNodes so that they
propagate their memory operand
Review: https://reviews.llvm.org/D28818
llvm-svn: 293200
This change introduces adjustPassManager target callback giving a
target an opportunity to tweak PassManagerBuilder before pass
managers are populated.
This generalizes and replaces addEarlyAsPossiblePasses target
callback. In particular that can be used to add custom passes to
extension points other than EP_EarlyAsPossible.
Differential Revision: https://reviews.llvm.org/D28336
llvm-svn: 293189
Summary:
This patch provides more staging for tail calls in XRay Arm32 . When the logging part of XRay is ready for tail calls, its support in the core part of XRay Arm32 may be as easy as changing the number passed to the handler from 1 to 2.
Coupled patch:
- https://reviews.llvm.org/D28674
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson, rengolin, dberris
Differential Revision: https://reviews.llvm.org/D28673
llvm-svn: 293185
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
And teach shouldAssumeDSOLocal that ppc has no copy relocations.
The resulting code handle a few more case than before. For example, it
knows that a weak symbol can be resolved to another .o file, but it
will still be in the main executable.
llvm-svn: 293180
Pulled out code that removed unused inputs from a target shuffle mask into a helper function to allow it to be reused in a future commit.
llvm-svn: 293175
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
Add support for loading i1, i8 and i16 arguments from the stack, with or without
the ABI extension flags.
When the ABI extension flags are present, we load a 4-byte value, otherwise we
preserve the size of the load and let the instruction selector replace it with a
LDRB/LDRH. This generates the same thing as DAGISel.
Differential Revision: https://reviews.llvm.org/D27803
llvm-svn: 293163
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
This reverts commit r292680. It is causing significantly worse
performance and test timeouts in our internal builds. I have already
routed reproduction instructions your way.
llvm-svn: 293092
Summary:
This patch prepares more for tail call support in XRay. Until the logging part supports tail calls, this is just staging, so it seems LLVM part is mostly ready with this patch.
Related: https://reviews.llvm.org/D28948 (compiler-rt)
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson
Differential Revision: https://reviews.llvm.org/D28947
llvm-svn: 293080
Change getReservedRegs() to not mark a register as reserved and then
revert that decision in some cases. Motivated by the discussion in
https://reviews.llvm.org/D29056
llvm-svn: 293073
Summary:
Lifetime extension wasn't triggered on the result of BuildMI because the
reference was non-const. However, instead of adding a const, I've
removed the reference entirely as RVO should kick in anyway.
Reviewers: rovka, bkramer
Reviewed By: bkramer
Subscribers: aemerson, rengolin, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29124
llvm-svn: 293059
Add support for:
* i1 add
* i1 function arguments, if passed through registers
* i1 returns, with ABI signext/zeroext
Differential Revision: https://reviews.llvm.org/D27706
llvm-svn: 293035
At the moment, this means supporting the signext/zeroext attribute on the return
type of the function. For function arguments, signext/zeroext should be handled
by the caller, so there's nothing for us to do until we start lowering calls.
Note that this does not include support for other extensions (i8 to i16), those
will be added later.
Differential Revision: https://reviews.llvm.org/D27705
llvm-svn: 293034
Enable the next form (intel style):
"mov <reg64>, <largeImm>"
which is should be available,
where <largeImm> stands for immediates which exceed the range of a singed 32bit integer
Differential Revision: https://reviews.llvm.org/D28988
llvm-svn: 293030
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Leave early ifcvt disabled for now since there are some
shader-db regressions.
This causes some immediate improvements, but could be better.
The cost checking that the pass does is based on critical path
length for out of order CPUs which we do not want so it skips out
on many cases we want.
llvm-svn: 293016
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
Summary:
This lets you select which sort of spilling you want, either s[0:1] or 64-bit loads from s[0:1].
Patch By: Dave Airlie
Reviewers: nhaehnle, arsenm, tstellarAMD
Reviewed By: arsenm
Subscribers: mareko, llvm-commits, kzhuravl, wdng, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D25428
llvm-svn: 293000
The sequence like this:
v_cmpx_le_f32_e32 vcc, 0, v0
s_branch BB0_30
s_cbranch_execnz BB0_30
; BB#29:
exp null off, off, off, off done vm
s_endpgm
BB0_30:
; %endif110
is likely wrong. The s_branch instruction will unconditionally jump
to BB0_30 and the skip block (exp done + endpgm) inserted for
performing the kill instruction will never be executed. This results
in a GPU hang with Star Ruler 2.
The s_branch instruction is added during the "Control Flow Optimizer"
pass which seems to re-organize the basic blocks, and we assume
that SI_KILL_TERMINATOR is always the last instruction inside a
basic block. Thus, after inserting a skip block we just go to the
next BB without looking at the subsequent instructions after the
kill, and the s_branch op is never removed.
Instead, we should remove the unconditional out branches and let
skip the two instructions if the exec mask is non-zero.
This patch fixes the GPU hang and doesn't introduce any regressions
with "make check".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99019
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 292985
This switches to the workaround that HSA defaults to
for the mesa path.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 292982
Regalloc creates COPY instructions which do not formally use VALU.
That results in v_mov instructions displaced after exec mask modification.
One pass which do it is SIOptimizeExecMasking, but potentially it can be
done by other passes too.
This patch adds a pass immediately after regalloc to add implicit exec
use operand to all VGPR copy instructions.
Differential Revision: https://reviews.llvm.org/D28874
llvm-svn: 292956
In order to follow the pattern of the existing 'slow-misaligned-128store'
option, rename the option 'no-quad-ldst-pairs' to 'slow-paired-128'.
llvm-svn: 292954
Summary:
This is in keeping with LLVM convention. The classes are InstPrinters, but the library is ${target}AsmPrinter.
This patch is in response to bryant pointing out to me that Lanai was the only backend deviating from convention here. Thanks!
Reviewers: jpienaar, bryant
Subscribers: mgorny, jgosnell, llvm-commits
Differential Revision: https://reviews.llvm.org/D29043
llvm-svn: 292953
The GeneralShuffle::add() method used to have an assert that made sure that
source elements were at least as big as the destination elements. This was
wrong, since it is actually expected that an EXTRACT_VECTOR_ELT node with a
smaller source element type than the return type gets extended.
Therefore, instead of asserting this, it is just checked and if this is the
case 'false' is returned from the GeneralShuffle::add() method. This case
should be very rare and is not handled further by the backend.
Review: Ulrich Weigand.
llvm-svn: 292888
When a register like R1 is reserved, X1 should be reserved as well. This
was already done "manually" when 64bit code was enabled, however using
the markSuperRegs() function on the base register is more convenient and
allows to use the checksAllSuperRegsMarked() function even in 32bit mode
to avoid accidental breakage in the future.
This is also necessary to allow https://reviews.llvm.org/D28881
Differential Revision: https://reviews.llvm.org/D29056
llvm-svn: 292870
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
When calculating kills, a register may be considered live because a part
of it is live, but if there is a use of that (whole) register, the whole
register (and its subregisters) need to be added to the live set.
llvm-svn: 292845
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
This is a series of patches to enable adding of machine sched
models for ARM processors easier and compact. They define new
sched-readwrites for groups of ARM instructions. This has been
missing so far, and as a consequence, machine scheduler models
for individual sub-targets have tended to be larger than they
needed to be.
The current patch focuses on floating-point instructions.
Reviewers: Diana Picus (rovka), Renato Golin (rengolin)
Differential Revision: https://reviews.llvm.org/D28194
llvm-svn: 292825
Vector immediate load instructions should have the isAsCheapAsAMove, isMoveImm
and isReMaterializable flags set. With them, these instruction will get
hoisted out of loops.
Review: Ulrich Weigand
llvm-svn: 292790
Re-Commit r292543 with a fix for the situation when the chain end is
MBB.end().
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292705
Summary:
Specifically, we upgrade llvm.nvvm.:
* brev{32,64}
* clz.{i,ll}
* popc.{i,ll}
* abs.{i,ll}
* {min,max}.{i,ll,u,ull}
* h2f
These either map directly to an existing LLVM target-generic
intrinsic or map to a simple LLVM target-generic idiom.
In all cases, we check that the code we generate is lowered to PTX as we
expect.
These builtins don't need to be backfilled in clang: They're not
accessible to user code from nvcc.
Reviewers: tra
Subscribers: majnemer, cfe-commits, llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D28793
llvm-svn: 292694
Summary:
DADToDAG has access to TargetLowering, but not vice versa, so this is
the more general location for these functions.
NFC
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28795
llvm-svn: 292693
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
llvm-svn: 292680
WebAssembly varargs functions use a significantly different ABI than
non-varargs functions, and the current code in
WebAssemblyFixFunctionBitcasts doesn't handle that difference. For now,
just avoid creating wrapper functions in the presence of varargs.
llvm-svn: 292645
Kill flags need to be updated correctly when moving stores up/down to
form store pair instructions.
Those invalid flags have been ignored before but as of r290014 they are
recognized when using -mllvm -verify-machineinstrs.
Also simplifies test/CodeGen/AArch64/ldst-opt-dbg-limit.mir, renames it
to ldst-opt.mir test and adds a new tests for this change.
Differential Revision: https://reviews.llvm.org/D28875
llvm-svn: 292625
This patch fixes debug information for __thread variable on Mips
using .dtprelword and .dtpreldword directives.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D28770
llvm-svn: 292624
We also want to optimise tests like this: return a*b == 0. The MULS
instruction is flag setting, so we don't need the CMP instruction but can
instead branch on the result of the MULS. The generated instructions sequence
for this example was: MULS, MOVS, MOVS, CMP. The MOVS instruction load the
boolean values resulting from the select instruction, but these MOVS
instructions are flag setting and were thus preventing this optimisation. Now
we first reorder and move the MULS to before the CMP and generate sequence
MOVS, MOVS, MULS, CMP so that the optimisation could trigger. Reordering of the
MULS and MOVS is safe to do because the subsequent MOVS instructions just set
the CPSR register and don't use it, i.e. the CPSR is dead.
Differential Revision: https://reviews.llvm.org/D27990
llvm-svn: 292608
Hunt down some of the places where we use bare addReg(0) or addImm(AL).addReg(0)
and replace with add(condCodeOp()) and add(predOps()). This should make it
easier to understand what those operands represent (without having to look at
the definition of the instruction that we're adding to).
Differential Revision: https://reviews.llvm.org/D27984
llvm-svn: 292587
Inline spiller can decide to move a spill as early as possible in the basic block.
It will skip phis and label, but we also need to make sure it skips instructions
in the basic block prologue which restore exec mask.
Added isPositionLike callback in TargetInstrInfo to detect instructions which
shall be skipped in addition to common phis, labels etc.
Differential Revision: https://reviews.llvm.org/D27997
llvm-svn: 292554
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292543
This instruction is missing from LiveIntervals.
I'm not aware of any problems because of this though.
Differential Revision: https://reviews.llvm.org/D28879
llvm-svn: 292521
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292516
As discussed on D28219 - it is profitable to combine trunc(binop (s/zext(x), s/zext(y)) to binop(trunc(s/zext(x)), trunc(s/zext(y))) assuming the trunc(ext()) will simplify further
llvm-svn: 292493
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
Summary:
Currently we expand and scalarize these operations, but I think we should be able to implement ADD/SUB with KXOR and MUL with KAND.
We already do this for scalar i1 operations so I just extended it to vectors of i1.
Reviewers: zvi, delena
Reviewed By: delena
Subscribers: guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D28888
llvm-svn: 292474
For -(x + y) -> (-x) + (-y), if x == -y, this would
change the result from -0.0 to 0.0. Since the fma/fmad
combine is an extension of this problem it also
applies there.
fmul should be fine, and I don't think any of the unary
operators or conversions should be a problem either.
llvm-svn: 292473
There's no neg.f16 instruction, so negation has to
be done via subtraction from zero.
Differential Revision: https://reviews.llvm.org/D28876
llvm-svn: 292452
r291670 doesn't crash on the original testcase from PR31589,
but it crashes on a slightly more complex one.
PR31589 has the new reproducer.
llvm-svn: 292444
ARM seems to prefer that long literals be formed from their little end in
order to promote the fusion of the instrs pairs MOV/MOVK and MOVK/MOVK on
Cortex A57 and others (v. "Cortex A57 Software Optimisation Guide", section
4.14).
Differential revision: https://reviews.llvm.org/D28697
llvm-svn: 292422
Limit register coalescer by not allowing it to artificially increase
size of registers beyond dword. Such super-registers are in fact
register sequences and not distinct HW registers.
With more super-regs we would need to allocate adjacent registers
and constraint regalloc more than needed. Moreover, our super
registers are overlapping. For instance we have VGPR0_VGPR1_VGPR2,
VGPR1_VGPR2_VGPR3, VGPR2_VGPR3_VGPR4 etc, which complicates registers
allocation even more, resulting in excessive spilling.
Differential Revision: https://reviews.llvm.org/D28782
llvm-svn: 292413
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
Summary:
In this function, virtual registers can be introduced (for example
through calls to emitThumbRegPlusImmInReg). doScavengeFrameVirtualRegs
will replace those virtual registers with concrete registers later on
in PrologEpilogInserter, which sets NoVRegs again.
This patch fixes the Codegen/Thumb/segmented-stacks.ll test case which
failed with expensive checks.
https://llvm.org/bugs/show_bug.cgi?id=27484
Reviewers: rnk, bkramer, olista01
Reviewed By: olista01
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D28829
llvm-svn: 292372
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
This patch improves the mul instruction combine function (combineMul)
by adding new layer of logic.
In this patch, we are adding the ability to fold (mul x, -((1 << c) -1))
or (mul x, -((1 << c) +1)) into (neg(X << c) -x) or (neg((x << c) + x) respective.
Differential Revision: https://reviews.llvm.org/D28232
llvm-svn: 292358
This reverts commit r292210, as it broke the Thumb buldbot with:
clang-5.0: error: the clang compiler does not support '-fxray-instrument
on thumbv7-unknown-linux-gnueabihf'.
llvm-svn: 292357
During post-RA pseudo expansion, an 'undef' flag of the source operand should
be propagated by emitGRX32Move().
Review: Ulrich Weigand
llvm-svn: 292353
This patch fixes bugzilla 31576 (https://llvm.org/bugs/show_bug.cgi?id=31576).
"data32" instruction prefix was not defined in the llvm.
An exception had to be added to the X86 tablegen and AsmPrinter because both "data16" and "data32" are encoded to 0x66 (but in different modes).
Differential Revision: https://reviews.llvm.org/D28468
llvm-svn: 292352
Summary:
This change also lets us use max.{s,u}16. There's a vague warning in a
test about this maybe being less efficient, but I could not come up with
a case where the resulting SASS (sm_35 or sm_60) was different with or
without max.{s,u}16. It's true that nvcc seems to emit only
max.{s,u}32, but even ptxas 7.0 seems to have no problem generating
efficient SASS from max.{s,u}16 (the casts up to i32 and back down to
i16 seem to be implicit and nops, happening via register aliasing).
In the absence of evidence, better to have fewer special cases, emit
more straightforward code, etc. In particular, if a new GPU has 16-bit
min/max instructions, we want to be able to use them.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28732
llvm-svn: 292304
Summary: Previously we lowered it literally, to shifts and xors.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28722
llvm-svn: 292303
Summary:
Avoid an unnecessary conversion operation when using the result of
ctpop.i32 or ctpop.i16 as an i32, as in both cases the ptx instruction
we run returns an i32.
(Previously if we used the value as an i32, we'd do an unnecessary
zext+trunc.)
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28721
llvm-svn: 292302
Summary:
* Disable "ctlz speculation", which inserts a branch on every ctlz(x) which
has defined behavior on x == 0 to check whether x is, in fact zero.
* Add DAG patterns that avoid re-truncating or re-expanding the result
of the 16- and 64-bit ctz instructions.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D28719
llvm-svn: 292299
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Even with the fix from r291630, this still causes problems. I get
widespread assertion failures in the Swift runtime's WeakRefCount::increment()
function. I sent a reduced testcase in reply to the commit.
llvm-svn: 292242
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
llvm-svn: 292210
Emit error when BPF backend sees a call to a global function or to an external symbol.
The kernel verifier only allows calls to predefined helpers from bpf.h
which are defined in 'enum bpf_func_id'. Such calls in assembler must
look like 'call [1-9]+' where number matches bpf_func_id.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 292204
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292154
Falkor only partially implements the ARMv8.1a extensions, so this patch
refactors the support for the SQRDML[A|S]H instruction into a separate
feature.
Differential Revision: https://reviews.llvm.org/D28681
llvm-svn: 292142
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292128
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
We were frequently checking for a list of types and the different types
conveyed no real information. So lump them together explicitly.
llvm-svn: 292095
Summary:
Previously there were three ways to inform the NVVMReflect pass whether
you wanted to flush denormals to zero:
* An LLVM command-line option
* Parameters to the NVVMReflect constructor
* Metadata on the module itself.
This change removes the first two, leaving only the third.
The motivation for this change, aside from simplifying things, is that
we want LLVM to be aware of whether it's operating in FTZ mode, so other
passes can use this information. Ideally we'd have a target-generic
piece of metadata on the module. This change moves us in that
direction.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28700
llvm-svn: 292068
These all involve bitcasts around the memory operands. This isn't
something we normally do for isel patterns. I suspect DAG combine should
convert the load type making this unnecessary.
llvm-svn: 292050
VPMACSDQH/VPMACSDQL act as VPADDQ( VPMULDQ( x, y ), z ) - multiply+extending either the odd/even 4i32 input elements and adding to v2i64 accumulator
llvm-svn: 292020
Isel now selects masked move instructions for vselect instead of blendm. But sometimes it beneficial to register allocation to remove the tied register constraint by using blendm instructions.
This also picks up cases where the masked move was created due to a masked load intrinsic.
Differential Revision: https://reviews.llvm.org/D28454
llvm-svn: 292005
We'll now expand AVX512_128_SET0 to an EVEX VXORD if VLX available. Or if its not, but register allocation has selected a non-extended register we will use VEX VXORPS. And if its an extended register without VLX we'll use a 512-bit XOR. Do the same for AVX512_FsFLD0SS/SD.
This makes it possible for the register allocator to have all 32 registers available to work with.
llvm-svn: 292004
Only scalar half-precision operations are supported at the moment.
- Adds general support for 'half' type in NVPTX.
- fp16 math operations are supported on sm_53+ GPUs only
(can be disabled with --nvptx-no-f16-math).
- Type conversions to/from fp16 are supported on all GPU variants.
- On GPU variants that do not have full fp16 support (or if it's disabled),
fp16 operations are promoted to fp32 and results are converted back
to fp16 for storage.
Differential Revision: https://reviews.llvm.org/D28540
llvm-svn: 291956
Previously we'd always lower @llvm.{sin,cos}.f32 to {sin.cos}.approx.f32
instruction even when unsafe FP math was not allowed.
Clang-generated IR is not affected by this as it uses precise sin/cos
from CUDA's libdevice when unsafe math is disabled.
Differential Revision: https://reviews.llvm.org/D28619
llvm-svn: 291936
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
GCC changes the CC between the user-code and the builtins based on the
value of `-target` rather than `-mfloat-abi`. When a HF target is used,
the VFP variant of the AAPCS CC is used. Otherwise, the AAPCS variant
is used. In all cases, the AEABI functions use the AAPCS CC. Adjust
the calling convention based on the target.
Resolves PR30543!
llvm-svn: 291909
Summary:
This allows the function to handle architectures with more than two register banks.
Depends on D27978
Reviewers: ab, t.p.northover, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, aemerson, rengolin, vkalintiris, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27339
llvm-svn: 291902
Use v8i64 variable ASHR instructions if we don't have VLX.
This is a reduced version of D28537 that just adds support for variable shifts - I'll continue with that patch (for just constant/uniform shifts) once I've fixed the type legalization issue in avx512-cvt.ll.
Differential Revision: https://reviews.llvm.org/D28604
llvm-svn: 291901
Summary:
We did lose a little specificity in the assertion messages for the
PartialMappingIdx enumerators in this change but this was necessary to
avoid unnecessary use of 'public:' and we haven't lost anything that
can't be discovered easily in lldb. Once this is tablegen-erated we could
also safely remove the assertions.
Depends on D27976
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, aemerson, rengolin, vkalintiris, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D27978
llvm-svn: 291900
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
For AddDefaultT1CC, we add a new helper t1CondCodeOp, which creates the
appropriate register operand. For AddNoT1CC, we use the existing condCodeOp
helper - we only had two uses of AddNoT1CC, so at this point it's probably not
worth having yet another helper just for them.
Differential Revision: https://reviews.llvm.org/D28603
llvm-svn: 291894
Replace all uses of AddDefaultCC with add(condCodeOp()).
The transformation has been done automatically with a custom tool based on Clang
AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28557
llvm-svn: 291893
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Some shuffles can be lowered to blend mask instruction (VPBLENDMB/VPBLENDMW/VPBLENDMD/VPBLENDMQ) .
In this patch, I added new pattern match for this case.
Reviewers:
1. craig.topper
2. guyblank
3. RKSimon
4. igorb
Differential Revision: https://reviews.llvm.org/D28483
llvm-svn: 291888
These aren't the most interesting set of blendm instructions as the unmasked version isn't useful. We were also missing the B and W forms. I'll add the masked versions of all sizes in a future patch.
llvm-svn: 291885
Emit SHRQ/SHLQ instead of ANDQ with a 64 bit constant mask if the result
is unused and the mask has only higher/lower bits set. For example, with
this patch LLVM emits
shrq $41, %rdi
je
instead of
movabsq $0xFFFFFE0000000000, %rcx
testq %rcx, %rdi
je
This reduces number of instructions, code size and register pressure.
The transformation is applied only for cases where the mask cannot be
encoded as an immediate value within TESTQ instruction.
Differential Revision: https://reviews.llvm.org/D28198
llvm-svn: 291806
64-bit integer division in Intel CPUs is extremely slow, much slower
than 32-bit division. On the other hand, 8-bit and 16-bit divisions
aren't any faster. The only important exception is Atom where DIV8
is fastest. Because of that, the patch
1) Enables bypassing of 64-bit division for Atom, Silvermont and
all big cores.
2) Modifies 64-bit bypassing to use 32-bit division instead of
16-bit one. This doesn't make the shorter division slower but
increases chances of taking it. Moreover, it's much more likely
to prove at compile-time that a value fits 32 bits and doesn't
require a run-time check (e.g. zext i32 to i64).
Differential Revision: https://reviews.llvm.org/D28196
llvm-svn: 291800
Switch some additional library call setup to be table driven. This
makes it more immediately obvious what the library call looks like.
This is important for ARM since the calling conventions for the builtins
change based on the target/libcall name. NFC
llvm-svn: 291789
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
llvm-svn: 291770
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
llvm-svn: 291768
r289653 added a case where `vselect <cond> <vector1> <all-zeros>`
is transformed to:
`vselect xor(cond, DAG.getConstant(1, DL, CondVT) <all-zeros> <vector1>`
This was not aimed to catch cases where Cond is not a vXi1
mask but it does. Moreover, when Cond type is VxiN (N > 1)
then xor(cond, DAG.getConstant(1, DL, CondVT) != NOT(cond).
This patch changes the above to xor with allones, and avoids
entering the case for non-mask Conds.
llvm-svn: 291745
This produces worse code when i16 is legal, mostly
due to combines getting confused by conversions inserted
for uniform 16-bit operations.
llvm-svn: 291717
The new matchers work after legalization to make them simpler, and to avoid
blocking other optimizations.
Differential Revision: https://reviews.llvm.org/D27779
llvm-svn: 291693
A store of an extracted element or a load which gets inserted into a vector,
will be combined into a vector load/store element instruction.
Therefore, isFoldableMemAccessOffset(), which is called by LSR, should
return false in these cases.
Reviewer: Ulrich Weigand
llvm-svn: 291673
DAG patterns optimization: truncate + unsigned saturation supported by VPMOVUS* instructions in AVX-512.
And VPACKUS* instructions on SEE* targets.
Differential Revision: https://reviews.llvm.org/D28216
llvm-svn: 291670
The code emiited by Clang's intrinsics for (v)cvtsi2ss, (v)cvtsi2sd,
(v)cvtsd2ss and (v)cvtss2sd is lowered to a code sequence that includes
redundant (v)movss/(v)movsd instructions. This patch adds patterns for
optimizing these sequences.
Differential revision: https://reviews.llvm.org/D28455
llvm-svn: 291660
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
llvm-svn: 291657
This was reverted because it would miscompile code where the cmp had
multiple uses. That was due to a deficiency in the existing code, which
was fixed in r291630 (see the PR for details).
This re-commit includes an extra test for the kind of code that got
miscompiled: @test_sub_1_setcc_jcc.
llvm-svn: 291640
We would miscompile the following:
void g(int);
int f(volatile long long *p) {
bool b = __atomic_fetch_add(p, 1, __ATOMIC_SEQ_CST) < 0;
g(b ? 12 : 34);
return b ? 56 : 78;
}
into
pushq %rax
lock incq (%rdi)
movl $12, %eax
movl $34, %edi
cmovlel %eax, %edi
callq g(int)
testq %rax, %rax <---- Bad.
movl $56, %ecx
movl $78, %eax
cmovsl %ecx, %eax
popq %rcx
retq
because the code failed to take into account that the cmp has multiple
uses, replaced one of them, and left the other one comparing garbage.
llvm-svn: 291630
Summary:
Previously if you had
* a function with the fast-math-enabled attr, followed by
* a function without the fast-math attr,
the second function would inherit the first function's fast-math-ness.
This means that mixing fast-math and non-fast-math functions in a module
was completely broken unless you explicitly annotated every
non-fast-math function with "unsafe-fp-math"="false". This appears to
have been broken since r176986 (March 2013), when the resetTargetOptions
function was introduced.
This patch tests the correct behavior as best we can. I don't think I
can test FPDenormalMode and NoTrappingFPMath, because they aren't used
in any backends during function lowering. Surprisingly, I also can't
find any uses at all of LessPreciseFPMAD affecting generated code.
The NVPTX/fast-math.ll test changes are an expected result of fixing
this bug. When FMA is disabled, we emit add as "add.rn.f32", which
prevents fma combining. Before this patch, fast-math was enabled in all
functions following the one which explicitly enabled it on itself, so we
were emitting plain "add.f32" where we should have generated
"add.rn.f32".
Reviewers: mkuper
Subscribers: hfinkel, majnemer, jholewinski, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28507
llvm-svn: 291618
The original code considered only v2i64 as slow for this feature. This patch
consider all 128-bit long vector types as slow candidates.
In internal tests, extending this feature to all 128-bit vector types
resulted in an overall improvement of 1% on Exynos M1.
Differential revision: https://reviews.llvm.org/D27998
llvm-svn: 291616
When we collect 2 uses of a function in FindUses and then RAUW when we
visit the first, we end up visiting the wrapper (because the second was
RAUW'd). We still want to use RAUW instead of just Use->set() because
it has special handling for Constants, so this patch just ensures that
only one use of each constant is added to the work list.
Differential Revision: https://reviews.llvm.org/D28504
llvm-svn: 291603
This patch fix PR31351: https://llvm.org/bugs/show_bug.cgi?id=31351
1. This patch adds new type of shuffle lowering
2. We can use the expand instruction, When the shuffle pattern is as following:
{ 0*a[0]0*a[1]...0*a[n] , n >=0 where a[] elements in a ascending order}.
Reviewers: 1. igorb
2. guyblank
3. craig.topper
4. RKSimon
Differential Revision: https://reviews.llvm.org/D28352
llvm-svn: 291584
The usage of some MIPS MSA instrinsics that took immediates could crash LLVM
during lowering. This patch addresses that behaviour. Crucially this patch
also makes the use of intrinsics with out of range immediates as producing an
internal error.
The ld,st instrinsics would trigger an assertion failure for MIPS64 as their
lowering would attempt to add an i32 offset to a i64 pointer.
Reviewers: vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D25438
llvm-svn: 291571
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
A previous commit was missing the test case and had another differential
in it.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291566
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291556
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
For i16 zeroext arguments when i16 was a legal type, the
known bits information from the truncate was lost. Insert
a zeroext so the known bits optimizations work with the 32-bit
loads.
Fixes code quality regressions vs. SI in min.ll test.
llvm-svn: 291461
Use the existing AVX2 v8i16 vector shift lowering for v16i8 (extending to v16i32) on AVX512 targets and v32i8 (extending to v32i16) on AVX512BW targets.
Cost model updates to follow.
llvm-svn: 291451
Use the existing AVX2 v8i16 vector shift lowering for v16i16 on AVX512 targets (AVX512BW will have already have lowered with vpsravw).
Cost model updates to follow.
llvm-svn: 291445
I noticed this problem as part of the ongoing attempt to canonicalize min/max ops in IR.
The debug output shows nodes like this:
t4: i32 = xor t2, Constant:i32<-1>
t21: i8 = setcc t4, Constant:i32<0>, setlt:ch
t14: i32 = select t21, t4, Constant:i32<-1>
And because the select is holding onto the t4 (xor) node while EmitTest creates a new
x86-specific xor node, the lowering results in:
t4: i32 = xor t2, Constant:i32<-1>
t25: i32,i32 = X86ISD::XOR t2, Constant:i32<-1>
t28: i32,glue = X86ISD::CMOV Constant:i32<-1>, t4, Constant:i8<15>, t25:1
Differential Revision: https://reviews.llvm.org/D28374
llvm-svn: 291392
The 'fast' costs should only work for shifts by uniform constants (uniform non-constant are lowered using the slow default implementation).
Logical shifts were not taking into account that we must mask the psrlw result, so the costs needed to be doubled.
Added missing AVX2/AVX512BW costs as well.
llvm-svn: 291391
We should probably teach the two address instruction pass to turn masked moves into BLENDM when its beneficial to the register allocator.
llvm-svn: 291371
All but (v2f64 broadcast f64) are handled with VBROADCAST instructions. The v2f64 version can be handled with VMOVDDUP.
We may want to consider converting to BLENDM instructions in the two address instruction pass if its beneficial to register allocation.
llvm-svn: 291369
Gracefully leave code that performs function-pointer bitcasts implying
non-trivial pointer conversions alone, rather than aborting, since it's
just undefined behavior.
llvm-svn: 291326
WebAssembly requires caller and callee signatures to match exactly. In LLVM,
there are a variety of circumstances where signatures may be mismatched in
practice, and one can bitcast a function address to another type to call it
as that type. This patch adds a pass which replaces bitcasted function
addresses with wrappers to replace the bitcasts.
This doesn't catch everything, but it does match many common cases.
llvm-svn: 291315
Re-apply r288561: This time with a fix where the ADDs that are part of a
3 instruction LOH would not invalidate the "LastAdrp" state. This fixes
http://llvm.org/PR31361
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
This reverts commit 9e6cedb0a4f14364d6511597a9160305e7d34493.
llvm-svn: 291266
Summary:
For instructions such as PSLLW/PSLLD/PSLLQ a variable shift amount may be passed in an XMM register.
The lower 64-bits of the register are evaluated to determine the shift amount.
This patch improves the construction of the vector containing the shift amount.
Reviewers: craig.topper, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28353
llvm-svn: 291120
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
llvm-svn: 291106
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. Unfortunately, because of the way
that the ABI works, we need to generate code as if we supported interposition
whenever the linker might insert stubs for the purpose of supporting it.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 291003
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: aprantl, MatzeB, mkuper
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290955
Replacing the memory operand in the intrinsic versions of the comis/ucomis instrucions from f128mem to ssmem/sdmem accordingly.
Differential Revision: https://reviews.llvm.org/D28138
llvm-svn: 290948
In some cases its more efficient to combine TRUNC( BINOP( X, Y ) ) --> BINOP( TRUNC( X ), TRUNC( Y ) ) if the binop is legal for the truncated types.
This is true for vector integer multiplication (especially vXi64), as well as ADD/AND/XOR/OR in cases where we only need to truncate one of the inputs at runtime (e.g. a duplicated input or an one use constant we can fold).
Further work could be done here - scalar cases (especially i64) could often benefit (if we avoid partial registers etc.), other opcodes, and better analysis of when truncating the inputs reduces costs.
I have considered implementing this for all targets within the DAGCombiner but wasn't sure we could devise a suitable cost model system that would give us the range we need.
Differential Revision: https://reviews.llvm.org/D28219
llvm-svn: 290947
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
X86 target does not provide any target specific cost calculation for interleave patterns.It uses the common target-independent calculation, which gives very high numbers. As a result, the scalar version is chosen in many cases. The situation on AVX-512 is even worse, since we have 3-src shuffles that significantly reduce the cost.
In this patch I calculate the cost on AVX-512. It will allow to compare interleave pattern with gather/scatter and choose a better solution (PR31426).
* Shiffle-broadcast cost will be changed in Simon's upcoming patch.
Differential Revision: https://reviews.llvm.org/D28118
llvm-svn: 290810
This reverts commit r290694. It broke sanitizer tests on Win64. I'll
probably bring this back, but the jump tables will just live in .text
like they do for MSVC.
llvm-svn: 290714
Among other stuff, this allows to use predefined .option.machine_version_major
/minor/stepping symbols in the directive.
Relevant test expanded at once (also file renamed for clarity).
Differential Revision: https://reviews.llvm.org/D28140
llvm-svn: 290710
Summary:
We were already using 32-bit jump table entries, but this was a
consequence of the default PIC model on Win64, and not an intentional
design decision. This patch ensures that we always use 32-bit label
difference jump table entries on Win64 regardless of the PIC model. This
is a good idea because it saves executable size and object file size.
Moving the jump tables to .rdata cleans up the disassembled object code
and reduces the available ROP targets, but it requires adding one more
RIP-relative lea to the code. COFF doesn't have relocations to express
the difference between two arbitrary symbols, so we can't use the jump
table label in the label difference like we do elsewhere.
Fixes PR31488
Reviewers: majnemer, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28141
llvm-svn: 290694
There are cases of AVX-512 instructions that have two possible encodings. This is the case with instructions that use vector registers with low indexes of 0 - 15 and do not use the zmm registers or the mask k registers.
The EVEX encoding prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, using the VEX encoding for these instructions results in a code size reduction of ~2 bytes even though it is compiled with the AVX-512 features enabled.
Reviewers: Craig Topper, Zvi Rackoover, Elena Demikhovsky
Differential Revision: https://reviews.llvm.org/D27901
llvm-svn: 290663
The feature allows for conditional assembly, filling the entries
of .amd_kernel_code_t etc.
Symbols are defined with value 0 at the beginning of each kernel scope.
After each register usage, the respective symbol is set to:
value = max( value, ( register index + 1 ) )
Thus, at the end of scope the value represents a count of used registers.
Kernel scopes begin at .amdgpu_hsa_kernel directive, end at the
next .amdgpu_hsa_kernel (or EOF, whichever comes first). There is also
dummy scope that lies from the beginning of source file til the
first .amdgpu_hsa_kernel.
Test added.
Differential Revision: https://reviews.llvm.org/D27859
llvm-svn: 290608
The 128 and 256 bit masked intrinsics are currently unused by clang. The sse and avx2 unmasked intrinsics are used instead. The new 512-bit intrinsic will be used to do the same. Then all masked versions will removed and autoupgraded.
llvm-svn: 290573
According to the Cortex-A57 doc, FDIV/FSQRT instructions should use F0 unit
(W-unit in AArch64SchedA57.td, the same as cryptography instructions),
not F1 unit (X-unit in td, like ASIMD absolute diff accum SABA/UABA).
This patch changes FDIV/FSQRT scheduling declarations to use A57UnitW
instead of A57UnitX. Also, latencies for those instructions are
corrected.
Patch by Andrew Zhogin.
llvm-svn: 290426
Summary:
In mergeSPUpdates, debug values need to be ignored when getting the
previous element, otherwise debug data could have an impact on codegen.
In eliminateCallFramePseudoInstr, debug values after the erased element
could have an impact on codegen and should be skipped.
Closes PR31319 (https://llvm.org/bugs/show_bug.cgi?id=31319)
Reviewers: mkuper, MatzeB, aprantl
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D27688
llvm-svn: 290423
The InstructionSelect pass will not look at target specific instructions
since they are already selected. As a result, the operands of target
specific instructions must be properly constrained, because it is not
going to fix them.
This fixes invalid register classes on call instruction.
llvm-svn: 290377
Canonicalize a select with a constant to the false side. This
enables more instruction shrinking opportunities since an
inline immediate can be used for the false side of v_cndmask_b32_e32.
This seems to usually be better but causes some code size regressions
in some tests.
llvm-svn: 290372
This is for splitMergedValStore in DAG Combine to share the target query interface
with similar logic in CodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D24707
llvm-svn: 290363
Follow up to D27209 fix, this patch now properly handles single transient
instruction in basic block.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D27856
llvm-svn: 290361
Summary: This is needed for later SDWA support in CodeGen.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27412
llvm-svn: 290338
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
llvm-svn: 290336
Replacing the memory operand in the ymm version of VPMADDWD from i128mem to i256mem.
Differential Revision: https://reviews.llvm.org/D28024
llvm-svn: 290333
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
I added API for creation a target specific memory node in DAG. Today, all memory nodes are common for all targets and their constructors are located in SelectionDAG.cpp.
There are some cases in X86 where we need to create a special node - truncation-with-saturation store, float-to-half-store.
In the current patch I added truncation-with-saturation nodes and I'm using them for intrinsics. In the future I plan to implement DAG lowering for truncation-with-saturation pattern.
Differential Revision: https://reviews.llvm.org/D27899
llvm-svn: 290250
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
When the instruction is processed the first time, it may be
deleted resulting in crashes. While the new test adds the same
user to the worklist twice, this particular case doesn't crash
but I'm not sure why.
llvm-svn: 290191
I haven't managed to get this to fail yet but its technically possible for the AND -> shuffle decomposition to result in illegal types.
llvm-svn: 290183
Summary:
Without a MachineMemOperand, the scheduler was assuming MIMG instructions
were ordered memory references, so no loads or stores could be reordered
across them.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27536
llvm-svn: 290179
Include of llvm/IR/Verifier.h was removed from HexagonCommonGEP.cpp in r289604
as unused. In fact it is required when expensive checks are enabled, because
it declared function `verifyFunction`, which is called in conditionally compiled
part of the file.
llvm-svn: 290170
Summary:
The expression for computing the return value of getMemOpBaseRegImmOfs has only
one possible value. The other value would result in a return earlier in the
function. This patch replaces the expression with its only possible value.
Reviewers: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27437
llvm-svn: 290133
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
llvm-svn: 290106
Teach the instruction selector and legalizer that it's ok to have adds with 8 or
16-bit integers.
This is the second part of https://reviews.llvm.org/D27704
llvm-svn: 290105
Teach the instruction selector that it's ok to copy small values from physical
registers.
First part of https://reviews.llvm.org/D27704
llvm-svn: 290104
PWR9 processor model for instruction scheduling. A subsequent patch will migrate
PWR9 to Post RA MIScheduler.
https://reviews.llvm.org/D24525
llvm-svn: 290102
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
llvm-svn: 290098
Summary:
Added pair of directives .hsa_code_object_metadata/.end_hsa_code_object_metadata.
Between them user can put YAML string that would be directly put to the generated note. E.g.:
'''
.hsa_code_object_metadata
{
amd.MDVersion: [ 2, 0 ]
}
.end_hsa_code_object_metadata
'''
Based on D25046
Reviewers: vpykhtin, nhaustov, yaxunl, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, mgorny, tony-tye
Differential Revision: https://reviews.llvm.org/D27619
llvm-svn: 290097
Add support for selecting simple G_LOAD and G_FRAME_INDEX instructions (32-bit
scalars only). This will be useful for functions that need to pass arguments on
the stack.
First part of https://reviews.llvm.org/D27195.
llvm-svn: 290096
Not sure whether it causes and ASAN false positive or whether it
actually leads to incorrect code or whether it even exposes bad code.
Hans, I'll get you instructions to reproduce this.
llvm-svn: 290066
Commit on behalf of Gadi Haber
Removed EVEX_V512 prefix from scalar EVEX instructions since HW ignores L'L bits anyway (LIG). 4 instructions are modified.
The changed encodings are validated with XED.
Rviewers: delena, igorb
Differential revision: https://reviews.llvm.org/D27802
llvm-svn: 290065
These nodes are only emitted for lowering FABS/FNEG/FNABS/FCOPYSIGN. Ideally we just wouldn't create these nodes if SSE2 or higher is available, but it was simple to just convert them in DAG combine.
For SSE2, AVX, and AVX512 with DQI this is no functional change as the execution domain fixing pass ensures the right domain is selected regardless of the ISD opcode.
For AVX-512 without DQI we end up using integer instructions since the floating point versions aren't available. But we were already doing that for any logical operations in code that didn't come from FABS/FNEG/FNABS/FCOPYSIGN so this seems no worse. And we get the benefit of being able to fold broadcasts now.
llvm-svn: 290060
Re-apply r288561: Liveness tracking should be correct now after r290014.
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 290026
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
atomic_load_add returns the value before addition, but sets EFLAGS based on the
result of the addition. That means it's setting the flags based on effectively
subtracting C from the value at x, which is also what the outer cmp does.
This targets a pattern that occurs frequently with reference counting pointers:
void decrement(long volatile *ptr) {
if (_InterlockedDecrement(ptr) == 0)
release();
}
Clang would previously compile it (for 32-bit at -Os) as:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: 31 c9 xor %ecx,%ecx
6: 49 dec %ecx
7: f0 0f c1 08 lock xadd %ecx,(%eax)
b: 83 f9 01 cmp $0x1,%ecx
e: 0f 84 00 00 00 00 je 14 <?decrement@@YAXPCJ@Z+0x14>
14: c3 ret
and with this patch it becomes:
00000000 <?decrement@@YAXPCJ@Z>:
0: 8b 44 24 04 mov 0x4(%esp),%eax
4: f0 ff 08 lock decl (%eax)
7: 0f 84 00 00 00 00 je d <?decrement@@YAXPCJ@Z+0xd>
d: c3 ret
(Equivalent variants with _InterlockedExchangeAdd, std::atomic<>'s fetch_add
or pre-decrement operator generate the same code.)
Differential Revision: https://reviews.llvm.org/D27781
llvm-svn: 289955
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
This patch appears to result in trampolines in vtables being miscompiled
when they in turn tail call a method.
I've posted some preliminary details about the failure on the thread for
this commit and talked to Hal. He was comfortable going ahead and
reverting until we sort out what is wrong.
llvm-svn: 289928
MachineLegalizer used to be the name of both the class and the member,
causing GCC errors. r276522 fixed that by renaming the member to just
'Legalizer'. The 'class' workaround isn't necessary anymore; drop it.
llvm-svn: 289848
This patch checks that the SlowMisaligned128Store subtarget feature is set
when penalizing such stores in getMemoryOpCost.
Differential Revision: https://reviews.llvm.org/D27677
llvm-svn: 289845
This is a tiny patch with a big pile of test changes.
This partially fixes PR27885:
https://llvm.org/bugs/show_bug.cgi?id=27885
My motivating case looks like this:
- vpshufd {{.*#+}} xmm1 = xmm1[0,1,0,2]
- vpshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
- vpblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5,6,7]
+ vshufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[0,2]
And this happens several times in the diffs. For chips with domain-crossing penalties,
the instruction count and size reduction should usually overcome any potential
domain-crossing penalty due to using an FP op in a sequence of int ops. For chips such
as recent Intel big cores and Atom, there is no domain-crossing penalty for shufps, so
using shufps is a pure win.
So the test case diffs all appear to be improvements except one test in
vector-shuffle-combining.ll where we miss an opportunity to use a shift to generate
zero elements and one test in combine-sra.ll where multiple uses prevent the expected
shuffle combining.
Differential Revision: https://reviews.llvm.org/D27692
llvm-svn: 289837
Move the check for the code model into isGlobalInSmallSectionImpl and return false (not in small section) for variables placed in sections prefixed with .ldata (workaround for a tool limitation).
llvm-svn: 289832
Add the missing domain equivalences for movss, movsd, movd and movq zero extending loading instructions.
Differential Revision: https://reviews.llvm.org/D27684
llvm-svn: 289825
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
In some situations, the BUILD_VECTOR node that builds a v18i8 vector by
a splat of an i8 constant will end up with signed 8-bit values and other
situations, it'll end up with unsigned ones. Handle both situations.
Fixes PR31340.
llvm-svn: 289804
This is essentially a recommit of r285893, but with a correctness fix. The
problem of the original commit was that this:
bic r5, r7, #31
cbz r5, .LBB2_10
got rewritten into:
lsrs r5, r7, #5
beq .LBB2_10
The result in destination register r5 is not the same and this is incorrect
when r5 is not dead. So this fix includes checking the uses of the AND
destination register. And also, compared to the original commit, some regression
tests didn't need changing anymore because of this extra check.
For completeness, this was the original commit message:
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more
efficient instruction selection if the bitmask is one consecutive sequence of
set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and
set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and
set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit
into the sign bit with one LSLS and change the condition query from NE/EQ to
MI/PL (we could also implement this by shifting into the carry bit and
branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower
zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two
16-bit instructions but can elide the CMP and doesn't require materializing a
complex immediate, so is also a win.
Differential Revision: https://reviews.llvm.org/D27761
llvm-svn: 289794
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Most of the PowerPC64 code generation for the ELF ABI is already PIC.
There are four main exceptions:
(1) Constant pointer arrays etc. should in writeable sections.
(2) The TOC restoration NOP after a call is needed for all global
symbols. While GNU ld has a workaround for questionable GCC self-calls,
we trigger the checks for calls from COMDAT sections as they cross input
sections and are therefore not considered self-calls. The current
decision is questionable and suboptimal, but outside the scope of the
change.
(3) TLS access can not use the initial-exec model.
(4) Jump tables should use relative addresses. Note that the current
encoding doesn't work for the large code model, but it is more compact
than the default for any non-trivial jump table. Improving this is again
beyond the scope of this change.
At least (1) and (3) are assumptions made in target-independent code and
introducing additional hooks is a bit messy. Testing with clang shows
that a -fPIC binary is 600KB smaller than the corresponding -fno-pic
build. Separate testing from improved jump table encodings would explain
only about 100KB or so. The rest is expected to be a result of more
aggressive immediate forming for -fno-pic, where the -fPIC binary just
uses TOC entries.
This change brings the LLVM output in line with the GCC output, other
PPC64 compilers like XLC on AIX are known to produce PIC by default
as well. The relocation model can still be provided explicitly, i.e.
when using MCJIT.
One test case for case (1) is included, other test cases with relocation
mode sensitive behavior are wired to static for now. They will be
reviewed and adjusted separately.
Differential Revision: https://reviews.llvm.org/D26566
llvm-svn: 289743
I've chosen to remove NVPTXInstrInfo::CanTailMerge but not
NVPTXInstrInfo::isLoadInstr and isStoreInstr (which are also dead)
because while the latter two are reasonably useful utilities, the former
cannot be used safely: It relies on successful address space inference
to identify writes to shared memory, but addrspace inference is a
best-effort thing.
llvm-svn: 289740
Summary:
Previously they were defined as a 2D char array in a header file. This
is kind of overkill -- we can let the linker lay out these strings
however it pleases. While we're at it, we might as well just inline
these constants where they're used, as each of them is used only once.
Also move NVPTXUtilities.{h,cpp} into namespace llvm.
Reviewers: tra
Subscribers: jholewinski, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27636
llvm-svn: 289728
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
llvm-svn: 289706
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
Since SGPRs should spill to VGPRs, they should be allocated first.
I don't think this is sufficient for SGPRs to always spill to
VGPRs though.
llvm-svn: 289671
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
adding new optimization opportunity by adding new X86ISelLowering pattern. The test case was shown in https://llvm.org/bugs/show_bug.cgi?id=30945.
Test explanation:
Select gets three arguments mask, op and op2. In this case, the Mask is a result of ICMP. The ICMP instruction compares (with equal operand) the zero initializer vector and the result of the first ICMP.
In general, The result of "cmp eq, op1, zero initializers" is "not(op1)" where op1 is a mask. By rearranging of the two arguments inside the Select instruction, we can get the same result. Without the necessary of the middle phase ("cmp eq, op1, zero initializers").
Missed optimization opportunity:
vpcmpled %zmm0, %zmm1, %k0
knotw %k0, %k1
can be combine to
vpcmpgtd %zmm0, %zmm2, %k1
Reviewers:
1. delena
2. igorb
Commited after check all
Differential Revision: https://reviews.llvm.org/D27160
llvm-svn: 289653
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. This will yield subtle bugs if
interposition is attempted. As a result, regardless of whether we're in PIC
mode, we don't assume that we need to add the nop to support the possibility of
ELF interposition. However, the necessary check is in place (i.e. calling
GV->isInterposable and TM.shouldAssumeDSOLocal) so when we have functions for
which interposition is allowed at the IR level, we'll add the nop as necessary.
In the mean time, we'll generate more tail calls and fewer nops when compiling
position-independent code.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 289638
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
This is not always behaving as expected as it turns out block live-in
lists are only correct most of the time. Still waiting for reviews on
https://reviews.llvm.org/D27559 to have them correct all of the time.
See also http://llvm.org/PR31361, rdar://25117107
This reverts commit r288567.
This reverts commit r288561.
llvm-svn: 289570
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
llvm-svn: 289566
In certain cases it is possible that transient instructions such as
%reg = IMPLICIT_DEF as a single instruction in a basic block to reach
the MipsHazardSchedule pass. This patch teaches MipsHazardSchedule to
properly look through such cases.
Reviewers: vkalintiris, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D27209
llvm-svn: 289529
Summary:
This pass will be used to relax instructions which use out of bounds
memory accesses to equivalent operations that can work with the
addresses.
The pass currently implements relaxation for the STDWPtrQRr instruction.
Without this pass, an assertion error would be hit in the pseudo expansion pass.
In the future, we will need to add more instructions to this pass. We can do
that on a case-by-case basic.
Reviewers: arsenm, kparzysz
Subscribers: wdng, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27650
llvm-svn: 289517
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
llvm-svn: 289510
Power8 has MTVSRWZ but no LXSIBZX/LXSIHZX, so move 1 or 2 bytes to VSR through MTVSRWZ is much faster than store the extended value into stack and load it with LXSIWZX.
This patch fixes pr31144.
Differential Revision: https://reviews.llvm.org/D27287
llvm-svn: 289473
Summary:
While the result is constant across a single primitive, each pixel
shader wave can have pixels from multiple primitives.
Reviewers: tstellarAMD, arsenm
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D27572
llvm-svn: 289447
PMULDQ returns the 64-bit result of the signed multiplication of the lower 32-bits of vXi64 vector inputs, we can lower with this if the sign bits stretch that far.
Differential Revision: https://reviews.llvm.org/D27657
llvm-svn: 289426
These intrinsics only load a single element. We should use sse_loadf32/f64 to give more options of what loads it can match.
Currently these instructions are often only getting their load folded thanks to the load folding in the peephole pass. I plan to add more types of loads to sse_load_f32/64 so we can match without the peephole.
llvm-svn: 289423
Summary:
These intrinsic instructions are all selected from intrinsics that have well defined behavior for where the upper bits come from. It's not the same place as the lower bits.
As you can see we were suppressing load folding for these instructions in some cases. In none of the cases was the separate load helping avoid a partial dependency on the destination register. So we should just go ahead and allow the load to be folded.
Only foldMemoryOperand was suppressing folding for these. They all have patterns for folding sse_load_f32/f64 that aren't gated with OptForSize, but sse_load_f32/f64 doesn't allow 128-bit vector loads. It only allows scalar_to_vector and vzmovl of scalar loads to match. There's no reason we can't allow a 128-bit vector load to be narrowed so I would like to fix sse_load_f32/f64 to allow that. And if I do that it changes some of these same test cases to fold the load too.
Reviewers: spatel, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27611
llvm-svn: 289419
When the load node which the broadcast instruction broadcasts has multiple uses, it cannot be folded.
A fallback pattern is added to catch these cases and provide another solution.
Differential Revision: https://reviews.llvm.org/D27661
llvm-svn: 289404
Regcall calling convention passes mask types arguments in x86 GPR registers.
The review includes the changes required in order to support v32i1, v16i1 and v8i1.
Differential Revision: https://reviews.llvm.org/D27148
llvm-svn: 289383
There was a bug where we would hit an assertion if 'Q' was used as a
constraint.
I also removed hardcoded register names to prefer regexes so the tests
don't break when the register allocator changes.
llvm-svn: 289325
Summary: This gets rid of the hardcoded 'r0' that was used previously.
Reviewers: asl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27567
llvm-svn: 289322
Ideally ISD::FP_TO_SINT and ISD::FP_TO_UINT would only be used for cases with the same number of input and output elements.
Similar things have already been done for other convert intrinsics.
llvm-svn: 289316
These should've been checking whether the immediate is a 6-bit unsigned
integer.
If the immediate was '63', this would cause an assertion error which
shouldn't have occurred.
llvm-svn: 289315
Since 32-bit instructions with 32-bit input immediate behavior
are used to materialize 16-bit constants in 32-bit registers
for 16-bit instructions, determining the legality based
on the size is incorrect. Change operands to have the size
specified in the type.
Also adds a workaround for a disassembler bug that
produces an immediate MCOperand for an operand that
is supposed to be OPERAND_REGISTER.
The assembler appears to accept out of bounds immediates and
truncates them, but this seems to be an issue for 32-bit
already.
llvm-svn: 289306
Summary:
There is no point in setting SGPRS=104, because VI allocates SGPRs
in multiples of 16, so 104 -> 112. That enables us to use all 102 SGPRs
for general purposes.
Reviewers: tstellarAMD
Subscribers: qcolombet, arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27149
llvm-svn: 289260
Reapplied with fix for PR31323 - X86 SSE2 vXi16 multiplies for illegal types were creating CONCAT_VECTORS nodes with vector inputs that might not total the number of elements in the result type.
llvm-svn: 289232
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
sse_load_f32/f64 can also match loads that are zero extended to vectors. We shouldn't match that because we wouldn't be able to get the instruction to zero the upper bits like the intrinsic semantics would require for such a case.
There is a test case that does depend on this behavior.
llvm-svn: 289193
We could previously select an integer which would hit an assertion error
in pseudo expansion.
The new type will also generate the appropriate fixups if needed, which
wasn't done beforehand.
llvm-svn: 289192
Summary:
Scalar intrinsics have specific semantics about the which input's upper bits are passed through to the output. The same input is also supposed to be the input we use for the lower element when the mask bit is 0 in a masked operation. We aren't currently keeping these semantics with instruction selection.
This patch corrects this by introducing new scalar FMA ISD nodes that indicate whether operand 1(one of the multiply inputs) or operand 3(the additon/subtraction input) should pass thru its upper bits.
We use this information to select 213/132 form for the operand 1 version and the 231 form for the operand 3 version.
We also use this information to suppress combining FNEG operations on the passthru input since semantically the passthru bits aren't negated. This is stronger than the earlier check added for a user being SELECTS so we can remove that.
This fixes PR30913.
Reviewers: delena, zvi, v_klochkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27144
llvm-svn: 289190
These were selecting directly to the VOP2 form instead
of VOP3 like the i32 instructions. Fixes regressions in
future commits where an immediate isn't folded because it was
initially used for the second operand.
Because uniform 16-bit operations are promoted to i32, it's
difficult to get a simple testcase where this matters. Fold
failures in SIFoldOperands here tend to be hidden by commute
and fold in SIShrinkInstructions.
llvm-svn: 289189
This was exposed by some code that used more than one level of sub-
registers. There is no testcase, because there is no such code in the
Hexagon backend.
llvm-svn: 289099
Not having this legal led to combine failures, resulting
in dumb things like bitcasts of constants not being folded
away.
The only reason I'm leaving the v_mov_b32 hack that f32
already uses is to avoid madak formation test regressions.
PeepholeOptimizer has an ordering issue where the immediate
fold attempt is into the sgpr->vgpr copy instead of the actual
use. Running it twice avoids that problem.
llvm-svn: 289096
The correct commutable opcode was set to itself, so this
was simply swapping the operands to commute instead of also
changing the opcode to v_subrev_u16.
llvm-svn: 289093
Multiple metadata values for records such as opencl.ocl.version, llvm.ident
and similar are created after linking several modules. For some of them, notably
opencl.ocl.version, this creates semantic problem because we cannot tell which
version of OpenCL the composite module conforms.
Moreover, such repetitions of identical values often create a huge list of
unneeded metadata, which grows bitcode size both in memory and stored on disk.
It can go up to several Mb when linked against our OpenCL library. Lastly, such
long lists obscure reading of dumped IR.
The pass unifies metadata after linking.
Differential Revision: https://reviews.llvm.org/D25381
llvm-svn: 289092
Summary:
Attaching !absolute_symbol to a global variable does two things:
1) Marks it as an absolute symbol reference.
2) Specifies the value range of that symbol's address.
Teach the X86 backend to allow absolute symbols to appear in place of
immediates by extending the relocImm and mov64imm32 matchers. Start using
relocImm in more places where it is legal.
As previously proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105800.html
Differential Revision: https://reviews.llvm.org/D25878
llvm-svn: 289087
Summary:
LC can currently select scalar load for uniform memory access
basing on readonly memory address space only. This restriction
originated from the fact that in HW prior to VI vector and scalar caches
are not coherent. With MemoryDependenceAnalysis we can check that the
memory location corresponding to the memory operand of the LOAD is not
clobbered along the all paths from the function entry.
Reviewers: rampitec, tstellarAMD, arsenm
Subscribers: wdng, arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D26917
llvm-svn: 289076
Summary:
Without the fix to isFrameOffsetLegal to consider the instruction's
immediate offset, the new test case hits the corresponding assertion in
resolveFrameIndex, because the LocalStackSlotAllocation pass re-uses a
different base register.
With only the fix to isFrameOffsetLegal, code quality reduces in a bunch of
places because frame base registers are added where they're not needed.
This is addressed by properly implementing needsFrameBaseReg, which also
helps to avoid unnecessary zero frame indices in a bunch of other places.
Fixes piglit glsl-1.50/execution/variable-indexing/gs-output-array-vec4-index-wr.shader_test
Reviewers: arsenm, tstellarAMD
Subscribers: qcolombet, kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D27344
llvm-svn: 289048
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
llvm-svn: 288980
If we don't skip over DEBUG_VALUEs, we get differences between -g and non-g
code.
This fixes PR31242.
Differential Revision: https://reviews.llvm.org/D27485
llvm-svn: 288965
The second operand of an "ri" instruction may be an immediate, but it may
also be a globalvariable, so we should make any assumptions.
This fixes PR31271.
Differential Revision: https://reviews.llvm.org/D27481
llvm-svn: 288964
This is now performed more generally by the target shuffle combine code.
Already covered by tests that were originally added in D7666/rL229480 to support combineVectorZext (or VectorZextCombine as it was known then....).
Differential Revision: https://reviews.llvm.org/D27510
llvm-svn: 288918
We are being inconsistent with these instructions (and all their variants.....) with a random mix of them using the default float domain.
Differential Revision: https://reviews.llvm.org/D27419
llvm-svn: 288902
The non-constant pool version of DecodeVPERMIL2PMask was not offsetting correctly for the second input. I've updated the code to match the implementation in the constant-pool version.
Annoyingly this bug was hidden for so long as it's tricky to combine to useful variable shuffle masks that don't become constant-pool entries.
llvm-svn: 288898
Summary:
If we write an immediate to a VGPR and then copy the VGPR to an
SGPR, we can replace the copy with a S_MOV_B32 sgpr, imm, rather than
moving the copy to the SALU.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D27272
llvm-svn: 288849
Summary:
Prefer expansions such as: pmullw,pmulhw,unpacklwd,unpackhwd over pmulld.
On Silvermont [source: Optimization Reference Manual]:
PMULLD has a throughput of 1/11 [instruction/cycles].
PMULHUW/PMULHW/PMULLW have a throughput of 1/2 [instruction/cycles].
Fixes pr31202.
Analysis of this issue was done by Fahana Aleen.
Reviewers: wmi, delena, mkuper
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D27203
llvm-svn: 288844
There were two problems:
+ AArch64 was reusing random data from its binary op tables, which is
complete nonsense for G_SEQUENCE.
+ Even when AArch64 gave up and said it couldn't handle G_SEQUENCE,
the generic code asserted.
llvm-svn: 288836
Summary:
This is NFC but prevents assertions when PartialMappingIdx is tablegen-erated.
The assumptions were:
1) FirstGPR is 0
2) FirstGPR is the first of the First* enumerators.
GPR32 is changed to 1 to demonstrate that assumption #1 is fixed. #2 will
be covered by a subsequent patch that tablegen-erates information and swaps
the order of GPR and FPR as a side effect.
Depends on D27336
Reviewers: ab, t.p.northover, qcolombet
Subscribers: aemerson, rengolin, vkalintiris, dberris, rovka, llvm-commits
Differential Revision: https://reviews.llvm.org/D27337
llvm-svn: 288812
When we see a non flag-setting instruction for which only the flag-setting
version is available in Thumb1, we should give a better error message than
"invalid instruction".
Differential Revision: https://reviews.llvm.org/D27414
llvm-svn: 288805
Check if a build_vector node includes a repeated constant pattern and replace it with a broadcast of that pattern.
For example:
"build_vector <0, 1, 2, 3, 0, 1, 2, 3>" would be replaced by "broadcast <0, 1, 2, 3>"
Differential Revision: https://reviews.llvm.org/D26802
llvm-svn: 288804
This is the final patch in the series of patches that improves
BUILD_VECTOR handling on PowerPC. This adds a few peephole optimizations
to remove redundant instructions. It also adds a large test case which
encompasses a large set of code patterns that build vectors - this test
case was the motivator for this series of patches.
Differential Revision: https://reviews.llvm.org/D26066
llvm-svn: 288800
Summary: This patch makes sure FirstCSPop and MBBI never point to DBG_VALUE instructions, which affected the code generated.
Reviewers: mkuper, aprantl, MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27343
llvm-svn: 288794
This pattern turned a vector sqrt/rcp/rsqrt operation of sse_load_f32/f64 into the the scalar instruction for the operation and put undef into the upper bits. For correctness, the resulting code should still perform the sqrt/rcp/rsqrt on the upper bits after the load is extended since that's what the operation asked for. Particularly in the case where the upper bits are 0, in that case we need calculate the sqrt/rcp/rsqrt of the zeroes and keep the result in the upper-bits. This implies we should be using the packed instruction still.
The only test case for this pattern is one I just added so there was no coverage of this.
llvm-svn: 288784
The intrinsics are supposed to pass the upper bits straight through to their output register. This means we need to make sure we still perform the 128-bit load to get those upper bits to pass to give to the instruction since the memory form of the instruction only reads 32 or 64 bits.
llvm-svn: 288781
The intrinsic takes one argument, the lower bits are affected by the operation and the upper bits should be passed through. The instruction itself takes two operands, the high bits of the first operand are passed through and the low bits of the second operand are modified by the operation. To match this to the intrinsic we should pass the single intrinsic input to both operands.
I had to remove the stack folding test for these instructions since they depended on the incorrect behavior. The same register is now used for both inputs so the load can't be folded.
llvm-svn: 288779
Summary:
This patch removes the scalar logical operation alias instructions. We can just use reg class copies and use the normal packed instructions instead. This removes the need for putting these instructions in the execution domain fixing tables as was done recently.
I removed the loadf64_128 and loadf32_128 patterns as DAG combine creates a narrower load for (extractelt (loadv4f32)) before we ever get to isel.
I plan to add similar patterns for AVX512DQ in a future commit to allow use of the larger register class when available.
Reviewers: spatel, delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27401
llvm-svn: 288771
It is kinda crazy to have llvm/include and llvm/lib/Target in the include path for every tablegen invocation for every tablegen-like tool.
This patch removes those flags from the tablgen function that is called everywhere by instead creating a variable LLVM_TABLEGEN_FLAGS which is setup in the LLVM source directories.
This removes TableGen.cmake's dependency on LLVM_MAIN_SRC_DIR, and LLVM_MAIN_INCLUDE_DIR.
llvm-svn: 288770
The structured CFG is just an aid to inserting exec
mask modification instructions, once that is done
we don't really need it anymore. We also
do not analyze blocks with terminators that
modify exec, so this should only be impacting
true branches.
llvm-svn: 288744
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
This changes the scalar non-intrinsic non-avx roundss/sd instruction
definitions not to read their destination register - allowing partial dependency
breaking.
This fixes PR31143.
Differential Revision: https://reviews.llvm.org/D27323
llvm-svn: 288703
Structure the definitions a bit more like the other classes.
The main change here is to split EXP with the done bit set
to a separate opcode, so we can set mayLoad = 1 so that it won't
be reordered before the other exp stores, since this has the special
constraint that if the done bit is set then this should be the last
exp in she shader.
Previously all exp instructions were inferred to have unmodeled
side effects.
llvm-svn: 288695
Doing so changes the evaluation order for relocation composition.
Patch By: Daniel Sanders
Reviewers: vkalintiris, atanasyan
Differential Revision: https://reviews.llvm.org/D26401
llvm-svn: 288666
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
llvm-svn: 288658
lib/Target/AMDGPU/SIRegisterInfo.cpp: In member function 'void llvm::SIRegisterInfo::spillSGPR(llvm::MachineBasicBlock::iterator, int, llvm::RegScavenger*) const':
lib/Target/AMDGPU/SIRegisterInfo.cpp:572:30: warning: variable 'SubRC' set but not used [-Wunused-but-set-variable]
const TargetRegisterClass *SubRC = nullptr;
^
lib/Target/AMDGPU/SIRegisterInfo.cpp: In member function 'void llvm::SIRegisterInfo::restoreSGPR(llvm::MachineBasicBlock::iterator, int, llvm::RegScavenger*) const':
lib/Target/AMDGPU/SIRegisterInfo.cpp:723:30: warning: variable 'SubRC' set but not used [-Wunused-but-set-variable]
const TargetRegisterClass *SubRC = nullptr;
^
The variable was assigned to, but never used. The functions called did not
mutate state. Simplify the logic and remove the variable. Identified by gcc
5.4.0.
llvm-svn: 288601
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
llvm-svn: 288561
VSX has instructions lxsiwax/lxsdx that can load 32/64 bit value into VSX register cheaply. That patch makes it known to memory cost model, so the vectorization of the test case in pr30990 is beneficial.
Differential Revision: https://reviews.llvm.org/D26713
llvm-svn: 288560
Summary: Implement custom lowering of SHL_PARTS to enable lowering of left shift with larger than 32-bit shifts.
Reviewers: eliben, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27232
llvm-svn: 288541
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
Move setting of hasSideEffects out of SystemZInstrFormats.td,
to allow use of the format classes for instructions where this
flag shouldn't be set. NFC.
llvm-svn: 288524
Summary: They are currently being parsed as %f14, %f16, and %f18.
Reviewers: venkatra, jyknight
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27342
llvm-svn: 288503
getTargetConstantBitsFromNode currently only extracts constant pool vector data, but it will need to be generalized to support broadcast and scalar constant pool data as well.
Converted Constant bit extraction and Bitset splitting to helper lambda functions.
llvm-svn: 288496
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106640.html
This is for a couple of reasons:
- Values of type PointerType are unlike the other SequentialTypes (arrays
and vectors) in that they do not hold values of the element type. By moving
PointerType we can unify certain aspects of how the other SequentialTypes
are handled.
- PointerType will have no place in the SequentialType hierarchy once
pointee types are removed, so this is a necessary step towards removing
pointee types.
Differential Revision: https://reviews.llvm.org/D26595
llvm-svn: 288462
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Since the spill is for the whole wave, these
don't have the swizzling problems that vector stores do
and a single 4-byte allocation is enough to spill a 64 element
register. This should reduce the number of spill instructions and
put all the spills for a register in the same cacheline.
This should save allocated private size, but for now it doesn't.
The extra slots are allocated for each component, but never used
because the frame layout is essentially finalized before frame
indices are replaced. For always using the scalar store path,
this should probably be moved into processFunctionBeforeFrameFinalized.
llvm-svn: 288445
Summary:
Make AArch64InstrInfo::foldMemoryOperandImpl more general by folding all
full COPYs between register classes of the same size that are either
spilled or refilled.
Reviewers: MatzeB, qcolombet
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27271
llvm-svn: 288439
Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
llvm-svn: 288437
Summary:
This patch fixes comparison of 64-bit atomic with its expected value in CMP_SWAP_64 expansion.
Currently, the low words are compared with CMP, while the high words are compared with SBC. SBC expects the carry flag to be set if CMP detects a difference. CMP might leave the carry unset for unequal arguments though if the first one is >= than the second. This might cause the comparison logic to detect false equality.
Example of the broken C++ code:
```
std::atomic<long long> at(2);
long long ll = 1;
std::atomic_compare_exchange_strong(&at, &ll, 3);
```
Even though the atomic `at` and the expected value `ll` are not equal and `atomic_compare_exchange_strong` returns `false`, `at` is changed to 3.
The patch replaces SBC with CMPEQ.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D27315
llvm-svn: 288433
This time the issue is fortunately just a simple mistake rather than a horrible
design spectre. I thought SUBS/SBCS provided sufficient NZCV flags for
comparing two 64-bit values, but they don't.
The fix is slightly clunkier in AArch64 because we can't use conditional
execution to emit a pair of CMPs. Traditionally an "icmp ne i128" would map to
an EOR/EOR/ORR/CBNZ, but that uses more registers so it's easier to go with a
CSET/CINC/CBNZ combination. Slightly less efficient, but this is -O0 anyway.
Thanks to Anton Korobeynikov for pointing out the issue.
llvm-svn: 288418
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Now that we have fixups that only fill parts of a byte, it turns
out we have to mask off the bits outside the fixup area when
applying them. Failing to do so caused invalid object code to
be emitted for bprp with a negative 12-bit displacement.
llvm-svn: 288374
not all lakemont MCU support long nop.
we can't assume we can generate long nop by default for MCU.
Differential Revision: https://reviews.llvm.org/D26895
llvm-svn: 288363
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
llvm-svn: 288296
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
Summary:
When computing useful bits for a BFM instruction, we need
to take into consideration the case where both operands
of the BFM are equal and provide data that we need to track.
Not doing this can cause us to miss useful bits.
Fixes PR31138 (https://llvm.org/bugs/show_bug.cgi?id=31138)
Reviewers: t.p.northover, jmolloy
Subscribers: evandro, gberry, srhines, pirama, mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D27130
llvm-svn: 288253
Initial support for target shuffle constant folding in cases where all shuffle inputs are constant. We may be able to relax this and merge shuffles with only some constant inputs in the future.
I've added the helper function getTargetConstantBitsFromNode (based off a similar function in X86ShuffleDecodeConstantPool.cpp) that could be reused for other cases requiring constant vector extraction.
Differential Revision: https://reviews.llvm.org/D27220
llvm-svn: 288250
This patch corresponds to review:
https://reviews.llvm.org/D26023
This patch adds support for converting a vector of loads into a single load if
the loads are consecutive (in either direction).
llvm-svn: 288219
This patch corresponds to review:
https://reviews.llvm.org/D25980
This is the 2nd patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC. This particular patch combines a build vector
of fp-to-int conversions into an fp-to-int conversion of a build vector of fp
values. For example:
Converts (build_vector (fp_to_[su]i $A), (fp_to_[su]i $B), ...)
Into (fp_to_[su]i (build_vector $A, $B, ...))).
Which is a natural match for much cleaner code.
llvm-svn: 288218
Summary: Previously 0 and -1 was matched via tablegen rules. But this could cause problems where a physical register was being used where a virtual register was expected (seen in optimizeSelect and TwoAddressInstructionPass). Instead follow AArch64 and match in DAGToDAGISel.
Reviewers: eliben, majnemer
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27171
llvm-svn: 288215
This commit caused some miscompiles that did not show up on any of the bots.
Reverting until we can investigate the cause of those failures.
llvm-svn: 288214
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
Use vaddr/vdst for the same purposes.
This also fixes a beg in SIInsertWaits for the
operand check. The stored value operand is currently called
data0 in the single offset case, not data.
llvm-svn: 288188
It isn't generally safe to fold the frame index
directly into the operand since it will possibly
not be an inline immediate after it is expanded.
This surprisingly seems to produce better code, since
the FI doesn't prevent folding other immediate operands.
llvm-svn: 288185
Change the logic for when to fold immediates to
consider the destination operand rather than the
source of the materializing mov instruction.
No change yet, but this will allow for correctly handling
i16/f16 operands. Since 32-bit moves are used to materialize
constants for these, the same bitvalue will not be in the
register.
llvm-svn: 288184
Summary:
In AArch64InstrInfo::foldMemoryOperandImpl, catch more cases where the
COPY being spilled is copying from WZR/XZR, but the source register is
not in the COPY destination register's regclass.
For example, when spilling:
%vreg0 = COPY %XZR ; %vreg0:GPR64common
without this change, the code in TargetInstrInfo::foldMemoryOperand()
and canFoldCopy() that normally handles cases like this would fail to
optimize since %XZR is not in GPR64common. So the spill code generated
would be:
%vreg0 = COPY %XZR
STR %vreg
instead of the new code generated:
STR %XZR
Reviewers: qcolombet, MatzeB
Subscribers: mcrosier, aemerson, t.p.northover, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26976
llvm-svn: 288176
This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
This makes the createGenericSchedLive() function that constructs the
default scheduler available for the public API. This should help when
you want to get a scheduler and the default list of DAG mutations.
This also shrinks the list of default DAG mutations:
{Load|Store}ClusterDAGMutation and MacroFusionDAGMutation are no longer
added by default. Targets can easily add them if they need them. It also
makes it easier for targets to add alternative/custom macrofusion or
clustering mutations while staying with the default
createGenericSchedLive(). It also saves the callback back and forth in
TargetInstrInfo::enableClusterLoads()/enableClusterStores().
Differential Revision: https://reviews.llvm.org/D26986
llvm-svn: 288057
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask_b32
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a propagation of source SGPR pair in place of v_cmp
is implemented. Additional side effect of this is that we may consume less VGPRs
at a cost of more SGPRs in case if holding of multiple conditions is needed, and
that is a clear win in most cases.
Differential Revision: https://reviews.llvm.org/D26114
llvm-svn: 288053
Bit-shifts by a whole number of bytes can be represented as a shuffle mask suitable for combining.
Added a 'getFauxShuffleMask' function to allow us to create shuffle masks from other suitable operations.
llvm-svn: 288040
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
I don't think isel selects these today, favoring adding the register to itself instead. But the load folding tables shouldn't be so concerned with what isel will use and just represent the relationships.
llvm-svn: 288007
If we were to unfold these, the load size would be increased to the register size. This is not safe to do since the enlarged load can do things like cross a page boundary into a page that doesn't exist.
I probably missed some instructions, but this should be a large portion of them.
llvm-svn: 288001
Most of these are the SSE4.1 PMOVZX/PMOVSX instructions which all read less than 128-bits. The only other was PMOVUPD which by definition is an unaligned load.
llvm-svn: 287991
Summary: When selectScalarSSELoad is looking for a scalar_to_vector of a scalar load, it makes sure the load is only used by the scalar_to_vector. But it doesn't make sure the scalar_to_vector is only used once. This can cause the same load to be folded multiple times. This can be bad for performance. This also causes the chain output to be duplicated, but not connected to anything so chain dependencies will not be satisfied.
Reviewers: RKSimon, zvi, delena, spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D26790
llvm-svn: 287983
The W bit distinquishes which operand is the memory operand. But if the mod bits are 3 then the memory operand is a register and there are two possible encodings. We already did this correctly for several other XOP instructions.
llvm-svn: 287961
Not sure this is truly needed but we had the floating point equivalents, the aligned equivalents, and the EVEX equivalents. So this just makes it complete.
llvm-svn: 287960
Summary:
Shuffle lowering may have widened the element size of a i32 shuffle to i64 before selecting X86ISD::SHUF128. If this shuffle was used by a vselect this can prevent us from selecting masked operations.
This patch detects this and changes the element size to match the vselect.
I don't handle changing integer to floating point or vice versa as its not clear if its better to push such a bitcast to the inputs of the shuffle or to the user of the vselect. So I'm ignoring that case for now.
Reviewers: delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27087
llvm-svn: 287939
This patch corrects the behaviour of code such as:
.local foo
jal foo
foo:
to use the correct jal expansion when writing ELF files.
Patch by: Daniel Sanders
Reviewers: zoran.jovanovic, seanbruno, vkalintiris
Differential Revision: https://reviews.llvm.org/D24722
llvm-svn: 287918
Vectorize UINT_TO_FP v2i32 -> v2f64 instead of scalarization (albeit still on the SIMD unit).
The codegen matches that generated by legalization (and is in fact used by AVX for UINT_TO_FP v4i32 -> v4f64), but has to be done in the x86 backend to account for legalization via 4i32.
Differential Revision: https://reviews.llvm.org/D26938
llvm-svn: 287886
The bug arises during register allocation on i686 for
CMPXCHG8B instruction when base pointer is needed. CMPXCHG8B
needs 4 implicit registers (EAX, EBX, ECX, EDX) and a memory address,
plus ESI is reserved as the base pointer. With such constraints the only
way register allocator would do its job successfully is when the addressing
mode of the instruction requires only one register. If that is not the case
- we are emitting additional LEA instruction to compute the address.
It fixes PR28755.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25088
llvm-svn: 287875
Move the definitions of three variables out of the switch.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25192
llvm-svn: 287874
- It does not modify the input instruction
- Second operand of any address is always an Index Register,
make sure we actually check for that, instead of a check for
an immediate value
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D24938
llvm-svn: 287873
Replace the CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes with general versions.
This is an initial step towards similar FP_TO_SINT/FP_TO_UINT and SINT_TO_FP/UINT_TO_FP lowering to AVX512 CVTTPS2QQ/CVTTPS2UQQ and CVTQQ2PS/CVTUQQ2PS with illegal types.
Differential Revision: https://reviews.llvm.org/D27072
llvm-svn: 287870
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
llvm-svn: 287843
m0 may need to be written for spill code, so
we don't want general code uses relying on the
value stored in it.
This introduces a few code quality regressions where copies
from m0 are not coalesced into copies of a copy of m0.
llvm-svn: 287841
The size and offset were wrong. The size of the object was
being used for the size of the access, when here it is really
being split into 4-byte accesses. The underlying object size
is set in the MachinePointerInfo, which also didn't have the
offset set.
llvm-svn: 287806
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
In rL283190, I added some InstAlias definitions to generate extended mnemonics
for some uses of the XXPERMDI instruction. However, when the assembler matches
these extended mnemonics, it matches the new instruction in situations where it
should match the old one.
This patch removes these definitions and accomplishes that by defining these
mnemonics with additional instructions that are isCodeGenOnly.
Fixes PR31127.
llvm-svn: 287765
Summary: This function is only called with integer VT arguments, so remove code that handles FP vectors.
Reviewers: RKSimon, craig.topper, delena, andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26985
llvm-svn: 287743
TargetSubtargetInfo is filled with CodeGen specific interfaces nowadays
(getInstrInfo(), getFrameLowering(), getSelectionDAGInfo()) most of the
tuning flags like enablePostRAScheduler(), getAntiDepBreakMode(),
enableRALocalReassignment(), ... also do not seem to be universal enough
to make sense outside of CodeGen.
Differential Revision: https://reviews.llvm.org/D26948
llvm-svn: 287708
This occurs during UINT_TO_FP v2f64 lowering.
We can easily generalize this to other horizontal ops (FHSUB, PACKSS, PACKUS) as required - we are doing something similar with PACKUS in lowerV2I64VectorShuffle
llvm-svn: 287676
Add missing unaligned store macros (ush/usw) and fix the exisiting
implementation of the unaligned load macros in order to generate
identical expansions with the GNU assembler.
llvm-svn: 287646
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Summary: Splat vectors are canonicalized to BUILD_VECTOR's so the code can be simplified. NFC-ish.
Reviewers: craig.topper, delena, RKSimon, andreadb
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D26678
llvm-svn: 287643
This commit handles cases where the size qualifier of an indirect memory reference operand in Intel syntax is missing (e.g. "vaddps xmm1, xmm2, [a]").
GCC will deduce the size qualifier for AVX512 vector and broadcast memory operands based on the possible matches:
"vaddps xmm1, xmm2, [a]" matches only “XMMWORD PTR” qualifier.
"vaddps xmm1, xmm2, [a]{1to4}" matches only “DWORD PTR” qualifier.
This is different from the current behavior of LLVM, which deduces the size qualifier based on the size of the memory operand.
For "vaddps xmm1, xmm2, [a]"
"char a;" will imply "BYTE PTR" qualifier
"short a;" will imply "WORD PTR" qualifier.
This commit aligns LLVM to GCC’s behavior.
This is the LLVM part of the review.
The Clang part of the review: https://reviews.llvm.org/D26587
Differential Revision: https://reviews.llvm.org/D26586
llvm-svn: 287630
I'm sure this caused the load size to misprint in Intel syntax output. We were also inconsistent about which patterns used which instruction between VEX and EVEX.
There are two different reg/reg versions of movq, one from a GPR and one from the lower 64-bits of an XMM register. This changes the loading folding table to use the single i64mem memory form for folding both cases. But we need to use TB_NO_REVERSE to prevent a duplicate entry in the unfolding table.
llvm-svn: 287622
Summary:
The index and one of the table operands can be swapped by changing the opcode to the other version. Neither of these operands are the one that can load from memory so this can't be used to increase memory folding opportunities.
We need to handle the unmasked forms and the kz forms. Since the load operand isn't being commuted we can commute the load and broadcast instructions too.
Reviewers: igorb, delena, Ayal, Farhana, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25652
llvm-svn: 287621
Summary:
Shuffle lowering widens the element size of a shuffle if elements are contiguous. This is sometimes help because wider element types have more shuffle options. If the shuffle is one of the arguments to a vselect this shuffle widening can introduce a bitcast between the vselect and the shuffle. This will prevent isel from selecting a masked operation. If the shuffle can be written equally efficiently with a different element size to match the vselect type we should change the shuffle type to allow masking.
This patch does this conversion for all VALIGND/VALIGNQ sizes. It also supports turning 128-bit PALIGNR into VALIGND/VALIGNQ. This fixes the case shown in PR31018.
I plan to add support for more operations in future patches.
Reviewers: RKSimon, zvi, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26902
llvm-svn: 287612
Summary:
When searching for load/store instructions to pair/merge don't treat
writes to WZR/XZR as clobbers since they don't change the value read
from WZR/XZR (which is always 0).
Reviewers: mcrosier, junbuml, jmolloy, t.p.northover
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26921
llvm-svn: 287592
This patch adds the seq macro.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris, seanbruno
Differential Revision: https://reviews.llvm.org/D24607
llvm-svn: 287573
At the moment we only use truncateVectorCompareWithPACKSS with direct vector comparison results (just one example of a known all/none signbits input).
This change relaxes the direct matching of a SETCC opcode by moving the logic up into SelectionDAG::ComputeNumSignBits and accepting any input with a known splatted signbit.
llvm-svn: 287535
- teach RelocVisitor to recognize bpf relocations
- fix AsmInfo->PointerSize to make sure dwarf is emitted correctly
- add a test for the above
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287521
This patch adds a test for the assembly code emitted with XRay
instrumentation. It also fixes a bug where the operand of a jump
instruction must be not the number of bytes to jump over, but rather the
number of 4-byte instructions.
Author: rSerge
Reviewers: dberris, rengolin
Differential Revision: https://reviews.llvm.org/D26805
llvm-svn: 287516
The tail call optimization was being used without proper consideration of
ABI requirements for saving and restoring the GP. This patch restricts tail
call optimization to functions within the same translation unit.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D24763
llvm-svn: 287505
The change is part of RegCall calling convention support for LLVM.
Long double (f80) requires special treatment as the first f80 parameter is saved in FP0 (floating point stack).
This review present the change and the corresponding tests.
Differential Revision: https://reviews.llvm.org/D26151
llvm-svn: 287485
add BPF disassembler, so tools like llvm-objdump can be used:
$ llvm-objdump -d -no-show-raw-insn ./sockex1_kern.o
./sockex1_kern.o: file format ELF64-BPF
Disassembly of section socket1:
bpf_prog1:
0: r6 = r1
8: r0 = *(u8 *)skb[23]
10: *(u32 *)(r10 - 4) = r0
18: r1 = *(u32 *)(r6 + 4)
20: if r1 != 4 goto 8
28: r2 = r10
30: r2 += -4
ld_imm64 (the only 16-byte insn) and special ld_abs/ld_ind instructions
had to be treated in a special way. The decoders for the rest of the insns
are automatically generated.
Add tests to cover new functionality.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287477
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
The MIPS MSA ASE provides instructions to convert to and from half precision
floating point. This patch teaches the MIPS backend to treat f16 as a legal
type and how to promote such values to f32 for the usual set of operations.
As a result of this, the fexup[lr].w intrinsics no longer crash LLVM during
type legalization.
Reviewers: zoran.jovanvoic, vkalintiris
Differential Revision: https://reviews.llvm.org/D26398
llvm-svn: 287349
Summary:
The 32-bit instructions don't zero the high 16-bits like the 16-bit
instructions do.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D26828
llvm-svn: 287342
Summary:
The addr64-based legalization is incorrect for MUBUF instructions with idxen
set as well as for BUFFER_LOAD/STORE_FORMAT_* instructions. This affects
e.g. shaders that access buffer textures.
Since we never actually need the addr64-legalization in shaders, this patch
takes the easy route and keys off the calling convention. If this ever
affects (non-OpenGL) compute, the type of legalization needs to be chosen
based on some TSFlag.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98664
Reviewers: arsenm, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D26747
llvm-svn: 287339
When we see a SETCC whose only users are zero extend operations, we can replace
it with a subtraction. This results in doing all calculations in GPRs and
avoids CR use.
Currently we do this only for ULT, ULE, UGT and UGE condition codes. There are
ways that this can be extended. For example for signed condition codes. In that
case we will be introducing additional sign extend instructions, so more careful
profitability analysis may be required.
Another direction to extend this is for equal, not equal conditions. Also when
users of SETCC are any_ext or sign_ext, we might be able to do something
similar.
llvm-svn: 287329
The same thing was done to 32-bit and 64-bit element sizes previously.
This will allow us to support these shuffls in InstCombineCalls along with the other variable shift intrinsics.
llvm-svn: 287312
since bpf instruction set was introduced people learned to
read and understand kernel verifier output whereas llvm asm
output stayed obscure and unknown. Convert llvm to emit
assembler text similar to kernel to avoid this discrepancy
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287300
Summary:
This extends FCOPYSIGN support to 512-bit vectors.
I've also added tests to show what the 128-bit and 256-bit cases look like with broadcast loads.
Reviewers: delena, zvi, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26791
llvm-svn: 287298
vXi64 multiplication is lowered into 3 calls of vpmuludq with the upper/lower 32-bit halves.
If any of these halves are zero then we can remove individual calls. Although there was isBuildVectorAllZeros code to do this I don't think it ever worked (maybe just for constant folded cases that don't seem to be tested for any longer).
This requires additional X86ISD support for computeKnownBitsForTargetNode, so far I've just added support for X86ISD::VZEXT (VPMOVZX* - helping the AVX2+ cases).
Partial fix for PR30845
Differential Revision: https://reviews.llvm.org/D26590
llvm-svn: 287223
Summary:
Variadic functions can be treated in the same way as normal functions
with respect to the number and types of parameters.
Reviewers: grosbach, olista01, t.p.northover, rengolin
Subscribers: javed.absar, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26748
llvm-svn: 287219
Register Calling Convention defines a new behavior for v64i1 types.
This type should be saved in GPR.
However for 32 bit machine we need to split the value into 2 GPRs (because each is 32 bit).
Differential Revision: https://reviews.llvm.org/D26181
llvm-svn: 287217
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
We save an inter-register file move this way. If there's any CPU where
the FP logic is slower, we could transform this back to int-logic in
MachineCombiner.
This helps, but doesn't solve, PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
The 'andn' test shows that we're missing a pattern match to
recognize the xor with -1 constant as a 'not' op.
llvm-svn: 287171
Summary:
A lot of the pseudo instructions are required because LLVM assumes that
all integers of the same size as the pointer size are legal. This means
that it will not currently expand 16-bit instructions to their 8-bit
variants because it thinks 16-bit types are legal for the operations.
This also adds all of the CodeGen tests that required the pass to run.
Reviewers: arsenm, kparzysz
Subscribers: wdng, mgorny, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26577
llvm-svn: 287162
We only ever create TargetConstantPool, TargetJumpTable, TargetExternalSymbol,
TargetGlobalAddress, TargetGlobalTLSAddress, MCSymbol and TargetBlockAddress
nodes as operands of X86ISD::Wrapper nodes, so we can remove one check and
invert the other.
Also update the documentation comment for X86ISD::Wrapper.
Differential Revision: https://reviews.llvm.org/D26731
llvm-svn: 287160
One half of the shifts obviously needed conditional selection based on whether
the shift amount is more than 32-bits, but leaving the other half as the
natural shift isn't acceptable either: it's undefined behaviour to shift a
32-bit value by more than 31.
llvm-svn: 287149
Summary:
Extend replaceZeroVectorStore to handle more vector type stores,
floating point zero vectors and set alignment more accurately on split
stores.
This is a follow-up change to r286875.
This change fixes PR31038.
Reviewers: MatzeB
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26682
llvm-svn: 287142
Summary:
1. Don't try to copy values to and from the same register class.
2. Replace copies with of registers with immediate values with v_mov/s_mov
instructions.
The main purpose of this change is to make MachineSink do a better job of
determining when it is beneficial to split a critical edge, since the pass
assumes that copies will become move instructions.
This prevents a regression in uniform-cfg.ll if we enable critical edge
splitting for AMDGPU.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D23408
llvm-svn: 287131
We can replace "scalar" FP-bitwise-logic with other forms of bitwise-logic instructions.
Scalar SSE/AVX FP-logic instructions only exist in your imagination and/or the bowels of
compilers, but logically equivalent int, float, and double variants of bitwise-logic
instructions are reality in x86, and the float variant may be a shorter instruction
depending on which flavor (SSE or AVX) of vector ISA you have...so just prefer float all
the time.
This is a preliminary step towards solving PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
Differential Revision:
https://reviews.llvm.org/D26712
llvm-svn: 287122
Both the (V)CVTDQ2PD (i32 to f64) and (V)CVTUDQ2PD (u32 to f64) conversion instructions are lossless and can be safely represented as generic SINT_TO_FP/UINT_TO_FP calls instead of x86 intrinsics without affecting final codegen.
LLVM counterpart to D26686
Differential Revision: https://reviews.llvm.org/D26736
llvm-svn: 287108
MipsFastISel uses a a class to represent addresses with a signed member
to represent the offset. MipsFastISel::emitStore, emitLoad and computeAddress
all treated the offset as being positive. In cases where the offset was
actually negative and a frame pointer was used, this would cause the constant
synthesis routine to crash as it would generate an unexpected instruction
sequence when frame indexes are replaced.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D26192
llvm-svn: 287099
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
Summary: These intrinsics have been unused for clang for a while. This patch removes them. We auto upgrade them to extractelements, a scalar operation and then an insertelement. This matches the sequence used by clangs intrinsic file.
Reviewers: zvi, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26660
llvm-svn: 287083
Doing this before register allocation reduces register pressure as we do
not even have to allocate a register for those dead definitions.
Differential Revision: https://reviews.llvm.org/D26111
llvm-svn: 287076
For the default, small and medium code model, use the existing
difference from the jump table towards the label. For all other code
models, setup the picbase and use the difference between the picbase and
the block address.
Overall, this results in smaller data tables at the expensive of one or
two more arithmetic operation at the jump site. Given that we only create
jump tables with a lot more than two entries, it is a net win in size.
For larger code models the assumption remains that individual functions
are no larger than 2GB.
Differential Revision: https://reviews.llvm.org/D26336
llvm-svn: 287059
wbinvl.* are vector instruction that do not sue vector registers.
v2: check only M?BUF instructions
Differential Revision: https://reviews.llvm.org/D26633
llvm-svn: 287056
Lower a = b * C where C = (2^n + 1) * 2^m to
add w0, w0, w0, lsl n
lsl w0, w0, m
Differential Revision: https://reviews.llvm.org/D229245
llvm-svn: 287019
The wave barrier represents the discardable barrier. Its main purpose is to
carry convergent attribute, thus preventing illegal CFG optimizations. All lanes
in a wave come to convergence point simultaneously with SIMT, thus no special
instruction is needed in the ISA. The barrier is discarded during code generation.
Differential Revision: https://reviews.llvm.org/D26585
llvm-svn: 287007
This patch helps avoids poor legalization of boolean vector results (e.g. 8f32 -> 8i1 -> 8i16) that feed into SINT_TO_FP by inserting an early SIGN_EXTEND and so help improve the truncation logic.
This is not necessary for AVX512 targets where boolean vectors are legal - AVX512 manages to lower ( sint_to_fp vXi1 ) into some form of ( select mask, 1.0f , 0.0f ) in most cases.
Fix for PR13248
Differential Revision: https://reviews.llvm.org/D26583
llvm-svn: 286979
Move some code inside the proper 'if' block to make sure it is only run once,
when the subtarget is first created. Things can still break if we use different
ARM target machines or if we have functions with different 'target-cpu' or
'target-features', we should fix that too in the future.
llvm-svn: 286974
This patch implements all the overloads for vec_xl_be and vec_xst_be. On BE,
they behaves exactly the same with vec_xl and vec_xst, therefore they are
simply implemented by defining a matching macro. On LE, they are implemented
by defining new builtins and intrinsics. For int/float/long long/double, it
is just a load (lxvw4x/lxvd2x) or store(stxvw4x/stxvd2x). For char/char/short,
we also need some extra shuffling before or after call the builtins to get the
desired BE order. For int128, simply call vec_xl or vec_xst.
llvm-svn: 286967
Summary: This is needed to be able to use this flags in InstrMappings.
Reviewers: tstellarAMD, vpykhtin
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D26666
llvm-svn: 286960
Summary:
Fix a case where the overflow value of type i1, which is legal on AVX512, was assigned to a VK1 register class.
We always want this value to be assigned to a GPR since the overflow return value is lowered to a SETO instruction.
Fixes pr30981.
Reviewers: mkuper, igorb, craig.topper, guyblank, qcolombet
Subscribers: qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D26620
llvm-svn: 286958
For 64bit ABIs it is common practice to use relative Jump Tables with
potentially different relocation bases. As the logic for the jump table
itself doesn't depend on the relocation base, make it easier for targets
to use the generic logic. Start by dropping the now redundant MIPS logic.
Differential Revision: https://reviews.llvm.org/D26578
llvm-svn: 286951
This patch adds the Sched Machine Model for Cortex-R52.
Details of the pipeline and descriptions are in comments
in file ARMScheduleR52.td included in this patch.
Reviewers: rengolin, jmolloy
Differential Revision: https://reviews.llvm.org/D26500
llvm-svn: 286949
Summary:
Add basic functionality to support call lowering for X86.
Currently only supports functions which return void and take zero arguments.
Inspired by commit 286573.
Reviewers: ab, qcolombet, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26593
llvm-svn: 286935
Implement the Newton series for square root, its reciprocal and reciprocal
natively using the specialized instructions in AArch64 to perform each
series iteration.
Differential revision: https://reviews.llvm.org/D26518
llvm-svn: 286907
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Fixed usage of std::sort so that we (hopefully) use instantiations that
actually exist in GCC 4.8.
llvm-svn: 286881
Summary:
Replace a splat of zeros to a vector store by scalar stores of WZR/XZR.
The load store optimizer pass will merge them to store pair stores.
This should be better than a movi to create the vector zero followed by
a vector store if the zero constant is not re-used, since one
instructions and one register live range will be removed.
For example, the final generated code should be:
stp xzr, xzr, [x0]
instead of:
movi v0.2d, #0
str q0, [x0]
Reviewers: t.p.northover, mcrosier, MatzeB, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26561
llvm-svn: 286875
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
llvm-svn: 286866
add an intrinsic to expose the 'VSX Scalar Convert Half-Precision to
Single-Precision' instruction.
Differential review: https://reviews.llvm.org/D26536
llvm-svn: 286862
Summary:
Extend image intrinsics to support data types of V1F32 and V2F32.
TODO: we should define a mapping table to change the opcode for data type of V2F32 but just one channel is active,
even though such case should be very rare.
Reviewers:
tstellarAMD
Differential Revision:
http://reviews.llvm.org/D26472
llvm-svn: 286860
The Stack slot coloring pass removes a store that is followed by a load
that deal with the same stack slot. The function isLoadFromStackSlot
is supposed to consider the loads that have no side-effects. This
patch fixed the issue by removing the unsafe loads from this function
Eg:
%vreg0<def> = L2_loadruh_io <fi#15>, 0
S2_storeri_io <fi#15>, 0, %vreg0
In this case, we load an unsigned extended half word and store this in to
the same stack slot. The Stack slot coloring pass considers safe to remove
the store. This patch marked all the non-vector byte and half word loads as
unsafe.
llvm-svn: 286843
Add explicit v16i16/v32i8 ADD/SUB costs, matching the costs of v4i64/v8i32 - they were missing for some reason.
This has side effects on the LV max bandwidth tests (AVX1 now prefers 128-bit vectors vs AVX2 which still prefers 256-bit)
llvm-svn: 286832
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
nThis avoids the nasty problems caused by using
memory instructions that read the exec mask while
spilling / restoring registers used for control flow
masking, but only for VI when these were added.
This always uses the scalar stores when enabled currently,
but it may be better to still try to spill to a VGPR
and use this on the fallback memory path.
The cache also needs to be flushed before wave termination
if a scalar store is used.
llvm-svn: 286766
These will be used to replace the masked intrinsics so that InstCombineCalls can optimize the AVX-512 variable shifts the same way it does for AVX2.
llvm-svn: 286754
After this I'll add the unmasked intrinsics to InstCombineCalls to finish making our handling of these types of shuffles consistent between AVX-512 and the legacy intrinsics.
llvm-svn: 286725
Summary:
This is the first step towards being able to add the avx512 shift by immediate intrinsics to InstCombineCalls where we aleady support the sse2 and avx2 intrinsics. We need to the unmasked versions so we can avoid having to teach InstCombineCalls that it would need to insert selects sometimes. Instead we'll just add the selects around the new instrinsics in the frontend.
This change should also enable the shift by i32 intrinsics to take a non-constant shift value just like the avx2 and sse intrinsics. This will enable us to fix PR30691 once we update clang.
Next I'll switch clang to use the new builtins. Then we'll come back to the backend and remove/autoupgrade the old intrinsics. Then I'll work on the same series for variable shifts.
Reviewers: RKSimon, zvi, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26333
llvm-svn: 286711
Summary: VALIGND and VALIGNQ are similar to PALIGNR but instead of working on a 128-bit lane they work on the entire vector register. This change leverages the shuffle rotate detection code used for PALIGNR to detect these cases.
Reviewers: delena, RKSimon
Subscribers: Farhana, llvm-commits
Differential Revision: https://reviews.llvm.org/D26297
llvm-svn: 286709
Summary:
This pass was assuming that when a PHI instruction defined a register
used by another PHI instruction that the defining insstruction would
be legalized before the using instruction.
This assumption was causing the pass to not legalize some PHI nodes
within divergent flow-control.
This fixes a bug that was uncovered by r285762.
Reviewers: nhaehnle, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D26303
llvm-svn: 286676
This patch corresponds to review:
https://reviews.llvm.org/D26480
Adds all the intrinsics used for various permute builtins that will
be added to altivec.h.
llvm-svn: 286638
Summary:
Fix off-by-one indexing error in loop checking that inserted value was a
splat vector.
Add code to check that INSERT_VECTOR_ELT nodes constructing the splat
vector have the expected constant index values.
Reviewers: t.p.northover, jmolloy, mcrosier
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26409
llvm-svn: 286616
This patch corresponds to review:
https://reviews.llvm.org/D26307
Adds all the intrinsics used for various conversion builtins that will
be added to altivec.h. These are type conversions between various types of
vectors.
llvm-svn: 286596
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
The NamedRegionTimer initializer without a group name puts the Timer
into the "Misc" group and is (nearly) unused. Remove it.
The only user of this constructor appears to be the HexagonGenInsert pass,
which creates a counter without group to count the complete execution
time of that pass, however since every pass gets a counter by the
PassManager anyway this should be unnecessary. Also removed the
pointless TimerGroup there.
Differential Revision: https://reviews.llvm.org/D25582
llvm-svn: 286524
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
Currently runtime metadata is emitted as an ELF section with name .AMDGPU.runtime_metadata.
However there is a standard way to convey vendor specific information about how to run an ELF binary, which is called vendor-specific note element (http://www.netbsd.org/docs/kernel/elf-notes.html).
This patch lets AMDGPU backend emits runtime metadata as a note element in .note section.
Differential Revision: https://reviews.llvm.org/D25781
llvm-svn: 286502
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
Suspected to be the cause of a sanitizer-windows bot failure:
Assertion failed: isImm() && "Wrong MachineOperand accessor", file C:\b\slave\sanitizer-windows\llvm\include\llvm/CodeGen/MachineOperand.h, line 420
llvm-svn: 286385
A relocatable immediate is either an immediate operand or an operand that
can be relocated by the linker to an immediate, such as a regular symbol
in non-PIC code.
Start using relocImm for 32-bit and 64-bit MOV instructions, and for operands
of type "imm32_su". Remove a number of now-redundant patterns.
Differential Revision: https://reviews.llvm.org/D25812
llvm-svn: 286384
For pairs of 32-bit registers: isub_lo, isub_hi.
For pairs of vector registers: vsub_lo, vsub_hi.
Add generic subreg indices: ps_sub_lo, ps_sub_hi, and a function
HexagonRegisterInfo::getHexagonSubRegIndex(RegClass, GenericSubreg)
that returns the appropriate subreg index for RegClass.
llvm-svn: 286377
The name/comment of the third argument to the ScheduleDAGMI constructor
is RemoveKillFlags and not IsPostRA. Only the comments are changed.
Review: A Trick
llvm-svn: 286350
This patch adds support for fptoui to 2i32 from both 2f64 and 2f32, building on Simon's change for the signed version in r284459 and using AVX-512 instructions.
If we don't have VLX support we need to use a 512-bit operation for v2f64->v2i32 and extract the result.
It also recognises that cvttpd2udq zeroes the upper 64-bits of the xmm result.
Differential Revision: https://reviews.llvm.org/D26331
llvm-svn: 286345
Summary: This allows the SSE intrinsic to use the EVEX instruction when available. It also fixes EVEX to not use a weird (v4i32 (fp_to_sint v2f64)) node and it merges some isel patterns. This also fixes some cases that weren't combining vzmovl with cvttpd2dq to remove extra moves.
Reviewers: delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26330
llvm-svn: 286344
Summary:
This is needed to make the v64i8 and v32i16 types legal for the 512-bit VBMI instructions. Fixes PR30912.
Reviewers: delena, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26322
llvm-svn: 286339
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Since IMPLIFIT_DEF instructions are omitted in the output, when the output
of an IMPLICIT_DEF instruction is stackified, the resulting register lacks
an explicit push, leading to a push/pop mismatch. Fix this by converting
such IMPLICIT_DEFs into CONST_I32 0 instructions so that they have explicit
pushes.
llvm-svn: 286274
Define a couple of additional semantic classes and use them
throughout the .td files to make them more consistent and
more easily readable.
No functional change.
llvm-svn: 286268
This changes the InstRR (and related) patterns to no longer
automatically add an "r" at the end of the mnemonic. This
makes the .td files more obviously understandable, and also
allows using the patterns for those few instructions that
do not follow the *r scheme.
Also add some more sub-formats of the RRF format class, to
match operand names and sequence from the PoP better.
No functional change.
llvm-svn: 286267
Now that we've added instruction format subclasses like
InstRIb, it makes sense to rename the old InstRI to InstRIa.
Similar for InstRX, InstRXY, InstRS, InstRSY, and InstSS.
No functional change.
llvm-svn: 286266
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
Summary: In addition, the branch instructions will have proper BB destinations, not offsets, like before.
Reviewers: asl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23718
llvm-svn: 286252
This patch avoids scalarization of CTLZ by instead expanding to use CTPOP (ref: "Hacker's Delight") when the necessary operations are available.
This also adds the necessary cost models for X86 SSE2 targets (the main beneficiary) to ensure vectorization only happens when its useful.
Differential Revision: https://reviews.llvm.org/D25910
llvm-svn: 286233
Under -enable-unsafe-fp-math, SELECT_CC lowering in AArch64
transforms floating point comparisons of the form "a == 0.0 ? 0.0 : x" to
"a == 0.0 ? a : x". But it incorrectly assumes that 'x' and 'a' have
the same type which can lead to a wrong CSEL node that crashes later
due to nonsensical copies.
Differential Revision: https://reviews.llvm.org/D26394
llvm-svn: 286231
Self-referencing PHI nodes need their destination operands to be constrained
because nothing else is likely to do so. For now we just pick a register class
naively.
Patch mostly by Ahmed again.
llvm-svn: 286183
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a forward propagation of a v_cmp 64 bit result
to an user is implemented. Additional side effect of this is that we may
consume less VGPRs in a cost of more SGPRs in case if holding of multiple
conditions is needed, and that is a clear win in most cases.
llvm-svn: 286171
Summary:
Some vector loads and stores generated from AArch64 intrinsics alias each other
unnecessarily, preventing better scheduling. We just need to transfer memory
operands during lowering.
Reviewers: mcrosier, t.p.northover, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26313
llvm-svn: 286168
Because we shift the stack pointer by an unknown amount, we need an
additional pointer. In the case where we have variable-size objects
as well, we can't reuse the frame pointer, thus three pointers.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26263
llvm-svn: 286160
If the branch was on a read-undef of vcc, passes that used
analyzeBranch to invert the branch condition wouldn't preserve
the undef flag resulting in a verifier error.
Fixes verifier failures in a future commit.
Also fix verifier error when inserting copy for vccz
corruption bug.
llvm-svn: 286133
* Use a generic vector unit to model the issue unit more accurately.
* Update some vector instructions that actually use the vector unit for more
than one cycle.
Review: Ulrich Weigand
llvm-svn: 286112
IssueWidth updated to reflect the capacity of the issue unit correctly.
Correct number of FX and LS units modelled (2, was 1).
Review: Ulrich Weigand
llvm-svn: 286109
When the base register (register pointing to the jump table) is the PC, we expect the jump table to directly follow the jump sequence with no intervening padding.
If there is intervening padding, the calculated offsets will not be correct. One solution would be to account for any padding in the emitted LDRB instruction, but at the moment we don't support emitting MCExprs for the load offset.
In the meantime, it's correct and only a slight amount worse to just move the padding up, from just before the jump table to just before the jump instruction sequence. We can do that by emitting code alignment before the jump sequence, as we know the number of instructions in the sequence is always 4.
llvm-svn: 286107
Cmake has not recognized that Hexagon.td has a new dependency in
HexagonPatterns.td. All changes to that file were not visible to
the build bots.
llvm-svn: 286084
This handles the last case of the builtin function calls that we would
generate code which differed from Microsoft's ABI. Rather than
generating a call to `__pow{d,s}i2` we now promote the parameter to a
float or double and invoke `powf` or `pow` instead.
Addresses PR30825!
llvm-svn: 286082
The clr/set/toggle-bit instructions (with the bit index given as an
immediate operand) had both, custom selection code that generated them,
and selection patterns at the same time. The selection patterns were
not used, because the custom selection code was executed first.
This patch removes the custom code in favor of the selection patterns.
The custom code handled 64-bit registers as well with an immediate bit
index, and so new patterns were added to implement that.
It was also the same case for the instruction "Rd += asr(Rs, Rt)",
except that the custom code did not offer any additional functionality,
and was simply removed.
llvm-svn: 286080
We are repeatedly calling computeZeroableShuffleElements in many shuffle lowering calls for the same shuffle mask/inputs.
This is a first step towards reusing the zeroable result, initially just for lowerVectorShuffleAsShift calls.
llvm-svn: 286037
behind the test that the MachineModuleInfo analysis was
actually available and can be used.
While the MachO bits may well be reasonable to assume in the darwin
assembly printer, the analysis isn't constructively guaranteed anywhere
I could find so it seems safest to avoid crashing here.
This issue was found with PVS-Studio. Pretty sure the Clang Static
Anaylzer flags similar issues but we've probably never pointed it at
this code effectively.
llvm-svn: 285972
Summary: ARMv6m supports dmb etc fench instructions but not ldrex/strex etc. So for some atomic load/store, LLVM should inline instructions instead of lowering to __sync_ calls.
Reviewers: rengolin, efriedma, t.p.northover, jmolloy
Subscribers: efriedma, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26120
llvm-svn: 285969
This file is unused as of r285939, but we need to keep it around
for bots that don't do full rebuilds. We should be able to delete this
again in a few days.
llvm-svn: 285948
Quite sad we still aren't really using aggressive dead code warnings
from Clang that we could potentially use to catch this and so many other
things.
llvm-svn: 285936
hange explores the fact that LDS reads may be reordered even if access
the same location.
Prior the change, algorithm immediately stops as soon as any memory
access encountered between loads that are expected to be merged
together. Although, Read-After-Read conflict cannot affect execution
correctness.
Improves hcBLAS CGEMM manually loop-unrolled kernels performance by 44%.
Also improvement expected on any massive sequences of reads from LDS.
Differential Revision: https://reviews.llvm.org/D25944
llvm-svn: 285919
This recommits r281323, which was backed out for two reasons. One, a selfhost failure, and two, it apparently caused Chromium failures. Actually, the latter was a red herring. The log has expired from the former, but I suspect that was a red herring too (actually caused by another problematic patch of mine). Therefore reapplying, and will watch the bots like a hawk.
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more efficient instruction selection if the bitmask is one consecutive sequence of set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit into the sign bit with one LSLS and change the condition query from NE/EQ to MI/PL (we could also implement this by shifting into the carry bit and branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two 16-bit instructions but can elide the CMP and doesn't require materializing a complex immediate, so is also a win.
llvm-svn: 285893
This fixes selection of KANDN instructions and allows us to remove an extra set of patterns for KNOT and KXNOR.
Reviewers: delena, igorb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26134
llvm-svn: 285878
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
Summary:
The post-RA scheduler occasionally uses additional implicit operands when
the vector implicit operand as a whole is killed, but some subregisters
are still live because they are directly referenced later. Unfortunately,
this seems incredibly subtle to reproduce.
Fixes piglit spec/glsl-110/execution/variable-indexing/vs-temp-array-mat2-index-wr.shader_test
and others.
Reviewers: arsenm, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D25656
llvm-svn: 285835
Summary:
Remove this pass from addMachineSSAOptimization() and register it unconditionally in through addPreRegAlloc(). This pass is required for generating correct PIC calls.
Reviewers: sdardis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26036
llvm-svn: 285814
GPRC and GPRC_NOR0 (or the 64bit equivalent) and not just the latter.
GPRC_NOR0 contains ZERO as alternative meaning of r0 and is therefore
not a true subclass of GPRC.
llvm-svn: 285813
While bootstrapping Clang with recent `gcc 6.2.0` I found a bug related to misleading indentation.
I believe, a pair of `{}` was forgotten, especially given the above similar piece of code:
```
if (!RDef || !HII->isPredicable(*RDef)) {
Done = coalesceRegisters(RD, RegisterRef(S1));
if (Done) {
UpdRegs.insert(RD.Reg);
UpdRegs.insert(S1.getReg());
}
}
```
Reviewers: kparzysz
Differential Revision: https://reviews.llvm.org/D26204
llvm-svn: 285794
This is enough to compile and link but doesn't yet do anything particularly
useful. Once an ASM parser and printer are added in the next two patches, the
whole thing can be usefully tested.
Differential Revision: https://reviews.llvm.org/D23562
llvm-svn: 285770
For now, only add instruction definitions for basic ALU operations. Our
initial target is a working MC layer rather than codegen, so appropriate
SelectionDAG patterns will come later.
Differential Revision: https://reviews.llvm.org/D23561
llvm-svn: 285769
This is the conservatively correct way because it's easy to
move or replace a scalar immediate. This was incorrect in the case
when the register class wasn't known from the static instruction
definition, but still needed to be an SGPR. The main example of this
is inlineasm has an SGPR constraint.
Also start verifying the register classes of inlineasm operands.
llvm-svn: 285762
Instructions with a 32-bit base encoding with an optional
32-bit literal encoded after them report their size as 4
for the disassembler. Consider these when computing the
MachineInstr size. This fixes problems caused by size estimate
consistency in BranchRelaxation.
llvm-svn: 285743
For example, rename s6Ext to s6_0Ext. The names for shifted integers
include the underscore and this will make the naming consistent. It
also exposed a few duplicates that were removed.
llvm-svn: 285728
This will prevent following regression when enabling i16 support (D18049):
test/CodeGen/AMDGPU/ctlz.ll
test/CodeGen/AMDGPU/ctlz_zero_undef.ll
Differential Revision: https://reviews.llvm.org/D25802
llvm-svn: 285716
This contains just enough for lib/Target/RISCV to compile. Notably a basic
RISCVTargetMachine and RISCVTargetInfo. At this point you can attempt llc
-march=riscv32 myinput.ll and will find it fails due to the lack of
MCAsmInfo.
See http://lists.llvm.org/pipermail/llvm-dev/2016-August/103748.html for
further discussion
Differential Revision: https://reviews.llvm.org/D23560
llvm-svn: 285712
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
I wanted to implement this as a target independent expansion, however when
targets say they want to expand FP_TO_FP16 what they actually want is
the unsafe math expansion when possible and expansion to a libcall in all
other cases.
The only way to make this work as a target independent would be to add logic
to target's TargetLowering construction to mark theses nodes as Expand when
LegalizeDAG can use the unsafe expansion and mark them as LibCall when it
cannot. I think this would be possible, but I think it would be too fragile
and complex as it would require targets to keep their expansion logic up
to date with the code in LegalizeDAG.
Reviewers: bogner, ab, t.p.northover, arsenm
Subscribers: wdng, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D25999
llvm-svn: 285704
[Reapplying r284580 and r285917 with fix and testing to ensure emitted jump tables for Thumb-1 have 4-byte alignment]
The TBB and TBH instructions in Thumb-2 allow jump tables to be compressed into sequences of bytes or shorts respectively. These instructions do not exist in Thumb-1, however it is possible to synthesize them out of a sequence of other instructions.
It turns out this sequence is so short that it's almost never a lose for performance and is ALWAYS a significant win for code size.
TBB example:
Before: lsls r0, r0, #2 After: add r0, pc
adr r1, .LJTI0_0 ldrb r0, [r0, #6]
ldr r0, [r0, r1] lsls r0, r0, #1
mov pc, r0 add pc, r0
=> No change in prologue code size or dynamic instruction count. Jump table shrunk by a factor of 4.
The only case that can increase dynamic instruction count is the TBH case:
Before: lsls r0, r4, #2 After: lsls r4, r4, #1
adr r1, .LJTI0_0 add r4, pc
ldr r0, [r0, r1] ldrh r4, [r4, #6]
mov pc, r0 lsls r4, r4, #1
add pc, r4
=> 1 more instruction in prologue. Jump table shrunk by a factor of 2.
So there is an argument that this should be disabled when optimizing for performance (and a TBH needs to be generated). I'm not so sure about that in practice, because on small cores with Thumb-1 performance is often tied to code size. But I'm willing to turn it off when optimizing for performance if people want (also note that TBHs are fairly rare in practice!)
llvm-svn: 285690
Generate the slowest possible codepath for noopt CodeGen. Even trying to be
clever with the negated jump can cause out-of-range jumps. Use a wide branch
instead. Although the code is modelled simplistically, the later optimizations
would recombine the branching into `cbz` if possible. This re-enables the
previous optimization as well as hopefully gives us working code in all cases.
Addresses PR30356!
llvm-svn: 285649
Summary:
This has been replaced by the NVPTXInferAddressSpaces pass. We've had
the new one as the default with the old one accessible via a flag for
some months now, and we've had no problems.
Reviewers: tra
Subscribers: llvm-commits, jholewinski, jingyue, mgorny
Differential Revision: https://reviews.llvm.org/D26165
llvm-svn: 285642
Introducing "k" and "Yk" constraints for extended inline assembly, enabling use of AVX512 masked vectorized instructions.
Commit on behalf of mharoush
Extending inline assembly support, compatible with GCC as folowing:
"k" constraint hints the compiler to select any of AVX512 k0-k7 registers.
"Yk" constraint is a subset of "k" excluding k0 which is not allowd to be used as a mask.
Reviewer: 1. rnk
Differential Revision: https://reviews.llvm.org/D25062
llvm-svn: 285591
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
llvm-svn: 285590
This patch implements two changes:
- Move processor feature definition into a new file SystemZFeatures.td,
and provide explicit lists of supported and unsupported features for
each level of the z/Architecture. This allows specifying unsupported
features in the scheduler definition files for each processor.
- Add optional aliases for the -mcpu processor names according to the
level of the z/Architecture, for compatibility with other compilers
on the platform. The supported aliases are:
-mcpu=arch8 equals -mcpu=z10
-mcpu=arch9 equals -mcpu=z196
-mcpu=arch10 equals -mcpu=zEC12
-mcpu=arch11 equals -mcpu=z13
llvm-svn: 285577
The LEFR/LFER pseudos are aliases for vector instructions and should
therefore be guared by FeatureVector. If they aren't, the TableGen
scheduler definition checking might complain that there is no data
for those pseudos for pre-z13 machines.
No functional change intended.
llvm-svn: 285576
Currently, when using an instruction that is not supported on the
currently selected architecture, the LLVM assembler is likely to
diagnose an "invalid operand" instead of a "missing feature".
This is because many operands require a custom parser in order to
be processed correctly, and if an instruction is not available
according to the current feature set, the generated parser code
will also not detect the associated custom operand parsers.
Fixed by temporarily enabling all features while parsing operands.
The missing features will then be correctly detected when actually
parsing the instruction itself.
llvm-svn: 285575
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
There is a bug describing poor cost model for floating point operations:
Bug 29083 - [X86][SSE] Improve costs for floating point operations. This
patch is the second one in series of patches dealing with cost model.
Differential Revision: https://reviews.llvm.org/D25722
llvm-svn: 285564
This removes a couple tablegen classes that become unused after this change. Another class gained an additional parameter to allow PMADDUBSW to specify a different result type from its input type.
llvm-svn: 285515
- Fix doxygen file comment
- reduce indentation in loop
- Factor out some common subexpressions
- Move independent helper function out of class
- Fix Changed flag (this is not strictly NFC but a bugfix, but the flag
seems ignored anyway)
llvm-svn: 285488
Summary:
Flat instruction can return out of order, so we need always need to wait
for all the outstanding flat operations.
Reviewers: tony-tye, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, llvm-commits, yaxunl
Differential Revision: https://reviews.llvm.org/D25998
llvm-svn: 285479
Also add glc bit to the scalar loads since they exist on VI
and change the caching behavior.
This currently has an assembler bug where the glc bit is incorrectly
accepted on SI/CI which do not have it.
llvm-svn: 285463
While trying to add the glc bit to SMEM instructions on VI
with the new refactoring I ran into some kind of shadowing
problem for the glc operand when using the pseudoinstruction
as a multiclass parameter.
Everywhere that currently uses it defines the operand to have the same
name as its type, i.e. glc:$glc which works. For some reason now it
conflicts, and its up evaluating to the wrong thing. For the
real encoding classes,
let Inst{16} = !if(ps.has_glc, glc, ?); was not being evaluated
and still visible in the Inst initializer in the expanded td file.
In other cases I got a a different error about an illegal operand
where this was using { 0 } initializer from the bits<1> glc initializer
instead of evaluating it as false in the if.
For consistency all of the operand types should probably
be captialized to avoid conflicting with the variable names
unless somebody has a better idea of how to fix this.
llvm-svn: 285462
Summary:
In isel, transform
Num % Den
into
Num - (Num / Den) * Den
if the result of Num / Den is already available.
Reviewers: tra
Subscribers: hfinkel, llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D26090
llvm-svn: 285461
It's possible to have a use of the private resource descriptor or
scratch wave offset registers even though there are no allocated
stack objects. This would result in continuing to use the maximum
number reserved registers. This could go over the number of SGPRs
available on VI, or violate the SGPR limit requested by
the function attributes.
llvm-svn: 285435
Do not use LiveIntervals to recalculate kills, because that cannot be
done accurately without implicit uses on predicated instructions.
llvm-svn: 285409
The Windows ARM target expects the compiler to emit a division-by-zero check.
The check would use the form of:
cmp r?, #0
cbz .Ltrap
b .Lbody
.Lbody:
...
.Ltrap:
udf #249 @ __brkdiv0
This works great most of the time. However, if the body of the function is
greater than 127 bytes, the branch target limitation of cbz becomes an issue.
This occurs in the unoptimized code generation cases sometimes (like in
compiler-rt).
Since this is a matter of correctness, possibly pay a small penalty instead. We
now form this slightly differently:
cbnz .Lbody
udf #249 @ __brkdiv0
.Lbody:
...
The positive case is through the branch instead of being the next instruction.
However, because of the basic block layout, the negated branch is going to be
a short distance always (2 bytes away, after the inserted __brkdiv0).
The new t__brkdiv0 instruction is required to explicitly mark the instruction as
a terminator as the generic UDF instruction is not a terminator.
Addresses PR30532!
llvm-svn: 285312
r282428 added the MipsOptimizePICCall as an opt-in pass that can be
skipped when using the -opt-bisect-limit option. However, this pass is
needed because it generates code that conforms to the o32 ABI
specification by using the $t9 register for PIC calls with JALR
instructions.
This bug was exposed by the fact that skipFunction() also checks for
the "optnone" attribute. This caused functions with that attribute to
break the requirements of the o32 ABI.
llvm-svn: 285305
With DQI but without VLX, lower v2i64 and v4i64 MUL operations with v8i64 MUL (vpmullq).
Updated cost table accordingly.
Differential Revision: https://reviews.llvm.org/D26011
llvm-svn: 285304
UMAAL is a DSP instruction and it is not available on thumbv7m
(Cortex-M3) and thumbv6m (Cortex-M0+1) targets. Also fix wrong
CHECK prefix in longMAC.ll test.
Patch by Vadzim Dambrouski.
Differential Revision: https://reviews.llvm.org/D25890
llvm-svn: 285278
Summary:
When finding a match for a merge and collecting the instructions that must
be moved, keep in mind that the instruction we merge might actually use one
of the defs that are being moved.
Fixes piglit spec/arb_enhanced_layouts/execution/component-layout/vs-tcs-load-output[-indirect].
The fact that the ds_read in the test case is not eliminated suggests that
there might be another problem related to alias analysis, but that's a
separate problem: this pass should still work correctly even when earlier
optimization passes missed something or were disabled.
Reviewers: tstellarAMD, arsenm
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D25829
llvm-svn: 285273
This patch corresponds to review:
https://reviews.llvm.org/D25896
It just eliminates the redundant ZExt after a count trailing zeros instruction.
llvm-svn: 285267
Since Exynos-M2 improved the FP square root unit a bit over the one in
Exynos-M1, it does not benefit from using the Newton series for such
operations.
llvm-svn: 285246
It would be a very nice invariant to rely on, but unfortunately it doesn't
necessarily hold (and the causes of mis-sorted reglists appear to be quite
varied) so to be robust the frame lowering code can't assume that the first
register in the list is also the first one that actually gets pushed.
Should fix an issue where we were turning something like:
push {r8, r4, r7, lr}
sub sp, #24
into nonsense like:
push {r2, r3, r4, r5, r6, r7, r8, r4, r7, lr}
llvm-svn: 285232
Update the README.txt with newer information, add a link to the Emscripten
page explaining the current easiest way to use the LLVM wasm backend, and
mention that other ways of using the LLVM wasm backend are in development.
llvm-svn: 285215
Add missing ISA versions 7.0.2/8.0.4/8.1.0. to backend.
Refactor processor definition to use ISA version features.
Fixed ISA version for stoney.
Based on Laurent Morichetti's patch.
Differential Revision: https://reviews.llvm.org/D25919
llvm-svn: 285210
Summary:
In the case where of 'select i1 , f32, f32' or select i1, f64, f64 prefer lowering to masked-moves over branches.
Fixes pr30561
Reviewers: igorb, aymanmus, delena
Differential Revision: https://reviews.llvm.org/D25310
llvm-svn: 285196
Summary: Clang's intrinsic header currently tries to negate the third operand of a vfmadd mask3 in order to create vfmsub, but this fails isel. This patch adds scalar vfmsub and vfnmsub mask3 that we can use instead to avoid the negate. This is consistent with the packed instructions.
Reviewers: igorb, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25933
llvm-svn: 285173
On SparcV8, it was previously the case that a variable-sized alloca
might overlap by 4-bytes the last fixed stack variable, effectively
because 92 (the number of bytes reserved for the register spill area) !=
96 (the offset added to SP for where to start a DYNAMIC_STACKALLOC).
It's not as simple as changing 96 to 92, because variables that should
be 8-byte aligned would then be misaligned.
For now, simply increase the allocation size by 8 bytes for each dynamic
allocation -- wastes space, but at least doesn't overlap. As the large
comment says, doing this more efficiently will require larger changes in
llvm.
Also adds some test cases showing that we continue to not support
dynamic stack allocation and over-alignment in the same function.
llvm-svn: 285131
It is not safe to use LOAD ON CONDITION to implement access to a memory
location marked "volatile", since the architecture leaves it unspecified
whether or not an access happens if the condition is false.
The current code already appears to care about that:
def LOC : CondUnaryRSY<"loc", 0xEBF2, nonvolatile_load, GR32, 4>;
Unfortunately, that "nonvolatile_load" operator is simply ignored
by the CondUnaryRSY class, and there was no test to catch it.
llvm-svn: 285077
We already have (V)PMOVZX* combining support, this is the beginning of handling (V)PMOVSX* similarly - other combines in combineVSZext can be generalized in future patches.
This unearthed an interesting bug in that we were generating illegal build vectors on 32-bit targets - it was proving difficult to create a test for it from PMOVZX, but it fired immediately with PMOVSX. I've created a more general form of the existing getConstVector to handle these cases - ideally this should be handled in non-target-specific code but I couldn't find an equivalent.
Differential Revision: https://reviews.llvm.org/D25874
llvm-svn: 285072
Summary: The one tricky thing about this is that the sign/zero_extend_inreg uses v64i8 as an input type which isn't legal without BWI support. Though the vpmovsxbq and vpmovzxbq instructions themselves don't require BWI. To support this we need to add custom lowering for ZERO_EXTEND_VECTOR_INREG with v64i8 input. This can mostly reuse the existing sign extend code with a couple checks for sign extend vs zero extend added.
Reviewers: delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25594
llvm-svn: 285053
This is a function to go backwards in a block to find the first
instruction in a bundle, so iterator is a more natural choice for
parameter/return rather than a reference to a MachineInstruction.
llvm-svn: 285051
This changes locals from being declared by the emitLocal hook in
WebAssemblyTargetStreamer, rather than with an instruction. After exploring
the infastructure in LLVM more, this seems to make more sense since
declaring locals doesn't use an encoded opcode.
This also adds more 0xd opcodes, type encodings, and miscellaneous
binary encoding bits.
llvm-svn: 285040
Passing a MachineFunction as argument is more natural and avoids an
unnecessary round-trip through the logic determining the correct
Subtarget because MachineFunction already has a reference anyway.
llvm-svn: 285039
(Const)?MIOperands is equivalent to the C++ style
MachineInstr::mop_iterator. Use the latter for consistency except for a
few callers of MIOperands::analyzePhysReg().
llvm-svn: 285029
This patch adds a pass, controlled by an option and off by default for
now, for making implicit get_local/set_local explicit. This simplifies
emitting wasm with MC.
Differential Revision: https://reviews.llvm.org/D25836
llvm-svn: 285009
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
Add support for estimating the square root or its reciprocal and division or
reciprocal using the combiner generic Newton series.
Differential revision: https://reviews.llvm.org/D25291
llvm-svn: 284986
https://reviews.llvm.org/D24924
This improves the code generated for a sequence of AND, ANY_EXT, SRL instructions. This is a targetted fix for this special pattern. The pattern is generated by target independet dag combiner and so a more general fix may not be necessary. If we come across other similar cases, some ideas for handling it are discussed on the code review.
llvm-svn: 284983
Summary:
The v_movreld machine instruction is used with three operands that are
in a sense tied to each other (the explicit VGPR_32 def and the implicit
VGPR_NN def and use). There is no way to express that using the currently
available operand bits, and indeed there are cases where the Two Address
instructions pass does the wrong thing.
This patch introduces a new set of pseudo instructions that are identical
in intended semantics as v_movreld, but they only have two tied operands.
Having to add a new set of pseudo instructions is admittedly annoying, but
it's a fairly straightforward and solid approach. The only alternative I
see is to try to teach the Two Address instructions pass about Three Address
instructions, and I'm afraid that's trickier and is going to end up more
fragile.
Note that v_movrels does not suffer from this problem, and so this patch
does not touch it.
This fixes several GL45-CTS.shaders.indexing.* tests.
Reviewers: tstellarAMD, arsenm
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D25633
llvm-svn: 284980
Summary:
Add relocations for AArch64 ILP32. Includes:
- Addition of definitions for R_AARCH32_*
- Definition of new -target-abi: ilp32
- Definition of data layout string
- Tests for added relocations. Not comprehensive, but matches
existing tests for 64-bit. Renames "CHECK-OBJ" to "CHECK-OBJ-LP64".
- Tests for llvm-readobj
Reviewers: zatrazz, peter.smith, echristo, t.p.northover
Subscribers: aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25159
llvm-svn: 284973
Add synci to the microMIPS instruction definitions, mark the MIPS sync & synci
as not being part of microMIPS. This does not cover the sync instruction alias,
as that will be handled with a different patch. Add sync to the valid tests for
microMIPS.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D25795
llvm-svn: 284962
We were defaulting to SSE2 costs which weren't taking into account the availability of PBLENDW/PBLENDVB to improve merging of per-element shift results.
llvm-svn: 284939
This will prevent following regression when enabling i16 support (D18049):
test/CodeGen/AMDGPU/cvt_f32_ubyte.ll
Differential Revision: https://reviews.llvm.org/D25805
llvm-svn: 284891
If a 64-bit value is tested against a bit which is known to be in the range
[0..31) (modulo 64), we can use the 32-bit BT instruction, which has a slightly
shorter encoding.
Differential Revision: https://reviews.llvm.org/D25862
llvm-svn: 284864
After register allocation it is possible to have a spill of a register
that is only partially defined. That in itself it fine, but creates a
problem for double vector registers. Stores of such registers are pseudo
instructions that are expanded into pairs of individual vector stores,
and in case of a partially defined source, one of the stores may use
an entirely undefined register. To avoid this, track the defined parts
and only generate actual stores for those.
llvm-svn: 284841
Summary:
Need to reorder the operands to have the callee as the last argument.
Adds a pseudo-instruction, and a pass to lower it into a real
call_indirect.
This is the first of two options for how to fix the problem.
Reviewers: dschuff, sunfish
Subscribers: jfb, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25708
llvm-svn: 284840
Summary:
The spill size was incorrectly set to 196 bits,
which isn't a multiple of 8. This problem was detected when
experimenting with asserts that the spill size should be a
multiple of the byte size.
New corrected value for the spill size is set to 192 bits.
Note that tablegen (RegisterInfoEmitter) will divide the
size set in the RegisterClass definition by 8. So this
change should not have any impact on the tablegen output
(trunc(192/8) == trunc(196/8) == 24 bytes).
Reviewers: t.p.northover
Subscribers: llvm-commits, aemerson, rengolin
Differential Revision: https://reviews.llvm.org/D25818
llvm-svn: 284814
This is a retry of r284495 which was reverted at r284513 due to use-after-scope bugs
caused by faulty usage of StringRef.
This version also renames a pair of functions:
getRecipEstimateDivEnabled()
getRecipEstimateSqrtEnabled()
as suggested by Eric Christopher.
original commit msg:
[Target] remove TargetRecip class; move reciprocal estimate isel functionality to TargetLowering
This is a follow-up to https://reviews.llvm.org/D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284746
We weren't accounting for legal types on every subtarget, meaning that many of the costs were using defaults.
We still don't correctly cost (or test) the 512-bit sdiv/udiv by uniform const cases, nor the power-of-2 cases.
llvm-svn: 284744
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
Post-RA sched strategy and scheduling instruction annotations for z196, zEC12
and z13.
This scheduler optimizes decoder grouping and balances processor resources
(including side steering the FPd unit instructions).
The SystemZHazardRecognizer keeps track of the scheduling state, which can
be dumped with -debug-only=misched.
Reviers: Ulrich Weigand, Andrew Trick.
https://reviews.llvm.org/D17260
llvm-svn: 284704
This required reengineering of some of the part of liveness calculation,
including fixing some issues caused by the limitations of the previous
approach. The current code is not necessarily the fastest, but it should
be functionally correct (at least more so than before). The compile-time
performance will be addressed in the future.
llvm-svn: 284609
Most z13 vector instructions have a base form where the data type of
the operation (whether to consider the vector to be 16 bytes, 8
halfwords, 4 words, or 2 doublewords) is encoded into a mask field,
and then a set of extended mnemonics where the mask field is not
present but the data type is encoded into the mnemonic name.
Currently, LLVM only supports the type-specific forms (since those
are really the ones needed for code generation), but not the base
type-generic forms.
To complete the assembler support and make it fully compatible with
the GNU assembler, this commit adds assembler aliases for all the
base forms of the various vector instructions.
It also adds two more alias forms that are documented in the PoP:
VFPSO/VFPSODB/WFPSODB -- generic form of VFLCDB etc.
VNOT -- special variant of VNO
llvm-svn: 284586
The vfee[bhf], vfene[bhf], and vistr[bhf] assembler mnemonics are
documented in the Principles of Operation to have an optional last
operand to encode arbitrary values in a mask field.
This commit adds support for those optional operands, and cleans up
the patterns to generate vector string instruction as bit. No change
to code generation intended.
llvm-svn: 284585
The TBB and TBH instructions in Thumb-2 allow jump tables to be compressed into sequences of bytes or shorts respectively. These instructions do not exist in Thumb-1, however it is possible to synthesize them out of a sequence of other instructions.
It turns out this sequence is so short that it's almost never a lose for performance and is ALWAYS a significant win for code size.
TBB example:
Before: lsls r0, r0, #2 After: add r0, pc
adr r1, .LJTI0_0 ldrb r0, [r0, #6]
ldr r0, [r0, r1] lsls r0, r0, #1
mov pc, r0 add pc, r0
=> No change in prologue code size or dynamic instruction count. Jump table shrunk by a factor of 4.
The only case that can increase dynamic instruction count is the TBH case:
Before: lsls r0, r4, #2 After: lsls r4, r4, #1
adr r1, .LJTI0_0 add r4, pc
ldr r0, [r0, r1] ldrh r4, [r4, #6]
mov pc, r0 lsls r4, r4, #1
add pc, r4
=> 1 more instruction in prologue. Jump table shrunk by a factor of 2.
So there is an argument that this should be disabled when optimizing for performance (and a TBH needs to be generated). I'm not so sure about that in practice, because on small cores with Thumb-1 performance is often tied to code size. But I'm willing to turn it off when optimizing for performance if people want (also note that TBHs are fairly rare in practice!)
llvm-svn: 284580
This renames the function for checking FP function attribute values and also
adds more build attribute tests (which are in separate files because build
attributes are set per file).
Differential Revision: https://reviews.llvm.org/D25625
llvm-svn: 284571
Summary:
This allows us to create broadcasts of 128-bit vector loads into 512-bit vectors.
New patterns added to support 8-bit and 16-bit vector types and v2f64/v2i64->v8f64/v8i64 without DQI instructions.
There also fallback patterns when the load can't be folded. These patterns are a little complex as we first need to insert the lower 128-bits into the second 128-bits using a zmm subvector insert instruction. We need to use a zmm insert in case VLX isn't available. Then use another zmm sub vector insert to take those 256-bits and insert them into the upper bits. Since we used a zmm insert to create the 256-bits we also need to do a extract_subreg to get just the lower 256-bits to pass to the second insert.
The outer insert for the fallback patterns should have its type correct because eventually we should also supported masked operations here too. So we need a DQI and a NoDQI version of the v16f32/v16i32 patterns.
Reviewers: RKSimon, delena, igorb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25651
llvm-svn: 284567
The custom lowering is pretty straightforward: basically, just AND
together the two halves of a <4 x i32> compare.
Differential Revision: https://reviews.llvm.org/D25713
llvm-svn: 284536
Transform `a == 0.0 ? 0.0 : x` to `a == 0.0 ? a : x` and `a != 0.0 ? x : 0.0`
to `a != 0.0 ? x : a` to avoid materializing 0.0 for FCSEL, since it does not
have to be materialized beforehand for FCMP, as it has a form that has 0.0
as an implicit operand.
Differential Revision: https://reviews.llvm.org/D24808
llvm-svn: 284531
AArch64 actually supports many 8-bit operations under the definition used by
GlobalISel: the designated information-carrying bits of a GPR32 get the right
value if you just use the normal 32-bit instruction.
llvm-svn: 284526
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
This patch teaches ias for mips to handle expressions such as
(8*4)+(8*31)($sp). Such expression typically occur from the expansion
of multiple macro definitions.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24667
llvm-svn: 284485
The 'sync' instruction for MIPS was defined in MIPS-II as taking no operands.
MIPS32 extended the define of 'sync' as taking an optional unsigned 5 bit
immediate.
This patch correct the definition of sync so that it is accepted with an
operand of 0 or no operand for MIPS-II to MIPS-V, and a 5 bit unsigned
immediate for MIPS32 and later revisions.
Additionally a clear error is given when the MIPS32 version of sync is
used when targeting pre MIPS32.
This partially resolves PR/30714.
Thanks to Daniel Sanders for reporting this issue!
Reveiwers: vkalintiris
Differential Revision: https://reviews.llvm.org/D25672
llvm-svn: 284483
ld and sd when assembled for the O32 ABI expand to a pair of 32 bit word loads
or stores using the specified source or destination register and the next
register.
This patch does not add support for the cases where the offset is greater than
a 16 bit signed immediate as that would lead to a wrong/misleading error
message as the assembler would report "instruction requires a CPU feature
not currently enabled" for ld & sd for MIPS64 when their offset is not a signed
16 bit number.
This fixes PR/29159.
Thanks to Sean Bruno for reporting this issue!
Reviewers: vkalintiris, seanbruno, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D24556
llvm-svn: 284481
Committing on behalf of Coby Tayree: After check-all and LGTM
Desc:
AVX512 allows dest operand to be followed by an op-mask register specifier ('{k<num>}', which in turn may be followed by a merging/zeroing specifier ('{z}')
Currently, the following forms are allowed:
{k<num>}
{k<num>}{z}
This patch allows the following forms:
{z}{k<num>}
and ignores the next form:
{z}
Justification would be quite simple - GCC
Differential Revision: http://reviews.llvm.org/D25013
llvm-svn: 284479
Summary:
Instead of instantiating the MipsFastISel class and checking if the
target is supported in the overriden methods, we should perform that
check before creating the class. This allows us to enable FastISel *only*
for targets that truly support it, ie. MIPS32 to MIPS32R5.
Reviewers: sdardis
Subscribers: ehostunreach, llvm-commits
Differential Revision: https://reviews.llvm.org/D24824
llvm-svn: 284475
This patch assigns cost of the scaling used in addressing for Cortex-R52.
On Cortex-R52 a negated register offset takes longer than a non-negated
register offset, in a register-offset addressing mode.
Differential Revision: http://reviews.llvm.org/D25670
Reviewer: jmolloy
llvm-svn: 284460
As discussed on PR28461 we currently miss the chance to lower "fptosi <2 x double> %arg to <2 x i32>" to cvttpd2dq due to its use of illegal types.
This patch adds support for fptosi to 2i32 from both 2f64 and 2f32.
It also recognises that cvttpd2dq zeroes the upper 64-bits of the xmm result (similar to D23797) - we still don't do this for the cvttpd2dq/cvttps2dq intrinsics - this can be done in a future patch.
Differential Revision: https://reviews.llvm.org/D23808
llvm-svn: 284459
This patch adds simplified support for tail calls on ARM with XRay instrumentation.
Known issue: compiled with generic flags: `-O3 -g -fxray-instrument -Wall
-std=c++14 -ffunction-sections -fdata-sections` (this list doesn't include my
specific flags like --target=armv7-linux-gnueabihf etc.), the following program
#include <cstdio>
#include <cassert>
#include <xray/xray_interface.h>
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fC() {
std::printf("In fC()\n");
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fB() {
std::printf("In fB()\n");
fC();
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fA() {
std::printf("In fA()\n");
fB();
}
// Avoid infinite recursion in case the logging function is instrumented (so calls logging
// function again).
[[clang::xray_never_instrument]] void simplyPrint(int32_t functionId, XRayEntryType xret)
{
printf("XRay: functionId=%d type=%d.\n", int(functionId), int(xret));
}
int main(int argc, char* argv[]) {
__xray_set_handler(simplyPrint);
printf("Patching...\n");
__xray_patch();
fA();
printf("Unpatching...\n");
__xray_unpatch();
fA();
return 0;
}
gives the following output:
Patching...
XRay: functionId=3 type=0.
In fA()
XRay: functionId=3 type=1.
XRay: functionId=2 type=0.
In fB()
XRay: functionId=2 type=1.
XRay: functionId=1 type=0.
XRay: functionId=1 type=1.
In fC()
Unpatching...
In fA()
In fB()
In fC()
So for function fC() the exit sled seems to be called too much before function
exit: before printing In fC().
Debugging shows that the above happens because printf from fC is also called as
a tail call. So first the exit sled of fC is executed, and only then printf is
jumped into. So it seems we can't do anything about this with the current
approach (i.e. within the simplification described in
https://reviews.llvm.org/D23988 ).
Differential Revision: https://reviews.llvm.org/D25030
llvm-svn: 284456
Summary: This is especially important for 32-bit targets with 64-bit shuffle elements.This is similar to how PSHUFB and VPERMIL handle the same problem.
Reviewers: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25666
llvm-svn: 284451
Summary:
If we are loading an i16 value from a 32-bit memory location, then
we need to be able to truncate the loaded value to i16.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D25198
llvm-svn: 284397
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
This is a patch to implement pr30640.
When a 64bit constant has the same hi/lo words, we can use rldimi to copy the low word into high word of the same register.
This optimization caused failure of test case bperm.ll because of not optimal heuristic in function SelectAndParts64. It chooses AND or ROTATE to extract bit groups from a register, and OR them together. This optimization lowers the cost of loading 64bit constant mask used in AND method, and causes different code sequence. But actually ROTATE method is better in this test case. The reason is in ROTATE method the final OR operation can be avoided since rldimi can insert the rotated bits into target register directly. So this patch also enhances SelectAndParts64 to prefer ROTATE method when the two methods have same cost and there are multiple bit groups need to be ORed together.
Differential Revision: https://reviews.llvm.org/D25521
llvm-svn: 284276
Summary:
We are using this helper for our 24-bit arithmetic combines, so we are now able to eliminate multi-use operations that mask the high-bits of 24-bit inputs (e.g. and x, 0xffffff)
Reviewers: arsenm, nhaehnle
Subscribers: tony-tye, arsenm, kzhuravl, wdng, nhaehnle, llvm-commits, yaxunl
Differential Revision: https://reviews.llvm.org/D24672
llvm-svn: 284267
X86. The pass optimizes as a unit the entire wide load + shuffles pattern
produced by interleaved vectorization. This initial patch optimizes one pattern
(64-bit elements interleaved by a factor of 4). Future patches will generalize
to additional patterns.
Patch by Farhana Aleen
Differential revision: http://reviews.llvm.org/D24681
llvm-svn: 284260
Use PackedRegisterRef to store the register information in the graph nodes.
This commit also removes support for virtual registers. It has never been
tested or used. It will be possible to add it back if there is a need.
llvm-svn: 284255
This change adds transformations such as:
zext(or(setcc(eq, (cmp x, 0)), setcc(eq, (cmp y, 0))))
To:
srl(or(ctlz(x), ctlz(y)), log2(bitsize(x))
This optimisation is beneficial on Jaguar architecture only, where lzcnt has a good reciprocal throughput.
Other architectures such as Intel's Haswell/Broadwell or AMD's Bulldozer/PileDriver do not benefit from it.
For this reason the change also adds a "HasFastLZCNT" feature which gets enabled for Jaguar.
Differential Revision: https://reviews.llvm.org/D23446
llvm-svn: 284248
Summary:
This will be used for 64-bit MULHU, which is in turn used for the 64-bit
divide-by-constant optimization (see D24822).
Reviewers: arsenm, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D25289
llvm-svn: 284224
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 284218
Committing in the name of Ziv Izhar: After check-all and LGTM .
The following patch is for compatability with Microsoft.
Microsoft ignores the keyword "short" when used after a jmp, for example:
__asm {
jmp short label
label:
}
A test for that patch will be added in another patch, since it's located in clang's codegen tests. Link will be added shortly.
link to test: https://reviews.llvm.org/D24958
Differential Revision: https://reviews.llvm.org/D24957
llvm-svn: 284211
Windows itanium is identical to MSVC when dealing with everything but C++.
Lower the math routines into msvcrt rather than compiler-rt.
llvm-svn: 284175
Windows itanium is equivalent to MSVC except in C++ mode. Ensure that the
promote the 32-bit floating point operations to their 64-bit equivalences.
llvm-svn: 284173
This option indicates copy relocations support is available from the linker
when building as PIE and allows accesses to extern globals to avoid the GOT.
Differential Revision: https://reviews.llvm.org/D24849
llvm-svn: 284160
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
We don't need to return a MachineInstr* from these stack probe insertion
calls anyway. If we ever need to add it back, we can return an iterator
instead.
Based on a patch by David Kreitzer
This bug is a consequence of
r279314 | dexonsmith | 2016-08-19 13:40:12 -0700 (Fri, 19 Aug 2016) | 110 lines
We hit the "Assertion `!NodePtr->isKnownSentinel()' failed" assertion,
but only when inserting a stack probe call at the end of an MBB, which
isn't necessarily a common situation.
Differential Revision: https://reviews.llvm.org/D25566
llvm-svn: 284130
This patch assigns cost of the scaling used in addressing.
On many ARM cores, a negated register offset takes longer than a
non-negated register offset, in a register-offset addressing mode.
For instance:
LDR R0, [R1, R2 LSL #2]
LDR R0, [R1, -R2 LSL #2]
Above, (1) takes less cycles than (2).
By assigning appropriate scaling factor cost, we enable the LLVM
to make the right trade-offs in the optimization and code-selection phase.
Differential Revision: http://reviews.llvm.org/D24857
Reviewers: jmolloy, rengolin
llvm-svn: 284127
Because everything live is spilled at the end of a
block by fast regalloc, assume this will happen and
avoid the copies of the resource descriptor.
llvm-svn: 284119
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
The Register Calling Convention (RegCall) was introduced by Intel to optimize parameter transfer on function call.
This calling convention ensures that as many values as possible are passed or returned in registers.
This commit presents the basic additions to LLVM CodeGen in order to support RegCall in X86.
Differential Revision: http://reviews.llvm.org/D25022
llvm-svn: 284108
We don't need to check if AVX is enabled. It's implied by the operation action being set to Custom.
We don't need to check both the input and output type widths. We only need to check the type that's being inserted or extracted. The other type is known to be a legal type and we can assume its a different width.
llvm-svn: 284102
This allows RegBankSelect in greedy mode to get rid some of the cross
register bank copies when loads are involved in the chain of
computation.
llvm-svn: 284097
- Use storage class C_STAT for 'PrivateLinkage' The storage class for
PrivateLinkage should equal to the Internal Linkage.
- Set 'PrivateGlobalPrefix' from "L" to ".L" for MM_WinCOFF (includes
x86_64) MM_WinCOFF has empty GlobalPrefix '\0' so PrivateGlobalPrefix
"L" may conflict to the normal symbol name starting with 'L'.
Based on a patch by Han Sangjin! Manually updated test cases.
llvm-svn: 284096
Craig Topper